Search Results

Search found 1068 results on 43 pages for 'eye of the storm'.

Page 30/43 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • .NET Reflector Pro Coming…

    The very best software is almost always originally the creation of a single person. Readers of our 'Geek of the Week' will know of a few of them.  Even behemoths such as MS Word or Excel started out with one programmer.  There comes a time with any software that it starts to grow up, and has to move from this form of close parenting to being developed by a team.  This has happened several times within Red-Gate: SQL Refactor, SQL Compare, and SQL Dependency Tracker, not to mention SQL Backup, were all originally the work of a lone coder, who subsequently handed over the development to a structured team of programmers, test engineers and usability designers. Because we loved .NET Reflector when Lutz Roeder wrote and nurtured it, and, like many other .NET developers, used it as a development tool ourselves, .NET Reflector's progress from being the apple of Lutz's eye to being a Red-Gate team-based development  seemed natural.  Lutz, after all, eventually felt he couldn't afford the time to develop it to the extent it deserved. Why, then, did we want to take on .NET Reflector?  Different people may give you different answers, but for us in the .NET team, it just seemed a natural progression. We're always very surprised when anyone suggests that we want to change the nature of the tool since it seems right just as it is. .NET Reflector will stay very much the tool we all use and appreciate, although the new version will support .NET 4, and will have many improvements in the accuracy of its decompiling. Whilst we've made a lot of improvements to Reflector, the radical addition, which we hope you'll want to try out as well, is '.NET Reflector Pro'. This is an extension to .NET Reflector that allows the debugging of decompiled code using the Visual Studio debugger. It is an add-in, but we'll be charging for it, mainly because we prefer to live indoors with a warm meal, rather than outside in tents, particularly when the winter's been as cold as this one has. We're hoping (we're even pretty confident!) that you'll share our excitement about .NET Reflector Pro. .NET Reflector Pro integrates .NET Reflector into Visual Studio, allowing you to seamlessly debug into third-party code and assemblies, even if you don't have the source code for them. You can now treat decompiled assemblies much like your own code: you can step through them and use all the debugging techniques that you would use on your own code. Try the beta now. span.fullpost {display:none;}

    Read the article

  • Aamir Khan’s Satyamev Jayate stirs a movement

    - by Gopinath
    Bollywood actor Aamir Khan is known for his dedication and hard work in inspiring millions of viewers though movies by discussing social problems and motivating people to solve them. His movie Rang De Basanthi seeded Indian anti-corruption movement, Tare Zameen Par touched the problems faced by few challenged kids and the latest movie 3 idiots exposed how education institutions in India are producing lakhs of Donkeys out of colleges every year. He extended his dedication of serving the society to small screen with the launch of reality TV show Satyamev Jayate. Before you start misjudging it as one of those non sense drama / entertaining reality shows, let me tell you that it is not a typical music, games, fight or dance reality show. Satyamev Jayate is all about the real people of India, their problems and how to tackle them.  This is not just a reality show, its movement to educate people about the social evils. Its been many years since I spent couple of hours  in front of TV as most of the programs are too cynical or does not add much value.  In my childhood I use to anxiously wait for Mahabarath or He-Man TV shows to start but after a two decades I waited anxiously for the start of Satyamev Jayate. The wait was worth and the 1 hours 30 minutes spent watching it meaningful. When was the last time you were so satisfied after watching a TV show and inspired to do something? I don’t remember. Today, the show focused on female foeticide and its impact. It showed women who were tortured and forced to abort female foetuses. On the show few brave women shared their experiences of giving birth to girl babies and rough times they are going through with their in-laws & husbands. The show not only focused on the problem but also on the root cause of the evil,  inspiring people working to tackle it and what every individual can do his part to solve it.  The best part of the show is,  its not a blame game. When there is a problem most of the people quickly get into identifying who is wrong and start blaming them instead of solve the actual problem.  Aamir did not blame anyone for female foeticide – neither the government who don’t impose strict rules, nor the doctors who abort girl babies to make money or the mother-in-laws & husbands who torcher girl baby mothers are blamed. He careful highlighted the problem, showed horrifying statistics and their impact on the future society and few inspiring people working to tackle the problem.  He touched heart and stirred a movement against the issue. First time ever I voted for a reality show through SMS and it’s for Satyamev Jayate. I’m proud to do so. Here are the few reactions of popular people, activists & media about the program @aamir_khan absolutely the best program I have seen on TV in recent past. Thanku for converting an idiot box into an inspirationsl medium — Kiran Bedi (@thekiranbedi) May 6, 2012 Satyamev Jayate proves tht TV 2 can b a tool of social change. — Shekhar Kapur (@shekharkapur) May 6, 2012 i absolutely loved #satyamevjayate. at least aamir is doing what all of us only talk about. — Harsha Bhogle (@bhogleharsha) May 6, 2012 Now Television will no longer be called an idiot box,the VISION of Television broadens up with#SatyamevJayate !!! — Madhur Bhandarkar (@mbhandarkar268) May 6, 2012 The Sunday 11am slot seems to have come back with a bang… #SatyamevJayate — atul kasbekar (@atulkasbekar) May 6, 2012   I was spellbound, says Prasoon Joshi – It’s a unique show. I was completely bowled over by it. It’s a never-done before concept Aamir Khan strikes the right chord with Satyamev Jayate – The format is quite crisp. Talking about the emotional connect, there are moments when your eyes well up with tears, but the various segments ensure there’s more content than emotional drama ‘Satyamev Jayate’ gutsy, sensible show: Viewers – From filmmakers to clinical psychologists to professors – everyone has given the thumbs up to Aamir Khan’s television show ‘Satyamev Jayate’, saying it is a gutsy, hard-hitting and sensible programme that strikes an emotional chord with the audiences. Aamir Khan’s TV debut ‘Satyamev Jayate’ takes Twitter by stormThe roads of the capital sported a deserted look around 11 am on Sunday morning, as everyone was hooked on to their TV sets. Did you watch the program? What is your opinion? I’m waiting for next 11 AM of next Sunday. Are you?

    Read the article

  • How to Use and Manage Extensions to Safari 5

    - by Mysticgeek
    While there have been hacks to include extensions in Safari for some time now, Safari 5 now offers proper support for them. Today we take a look at managing extensions in the latest version of Safari. Installation and Setup Download and install Safari 5 (link below). Make sure to download the installer that doesn’t include QuickTime if you don’t want it. Also, uncheck getting Apple updates and news in your email. Then decide if you want to install Bonjour for Windows and have Safari automatically update or not. Once it’s installed, launch Safari and select Show Menu Bar from the the Settings Menu. Then go into Preferences \ Advanced and check the box Show Develop menu in the menu bar. Develop will now appear on the Menu Bar…click on it and select Enable Extensions. Using Extensions Now you can find and start using extensions (link below) that will work with Safari 5. In this example we’re installing PageSaver which takes an image of what is showing in your browser. Click on the link for the Extension you want to install…   Then you’ll get a confirmation asking if you want to open or save it. Opening it will install it right away. Click Install in the dialog that asks if you’re sure you want to. Here we see the Extension was successfully installed and you can see the camera icon on the Toolbar. When you’re on a portion of a webpage you want to take an image of, click on the camera icon and you’ll have the image saved in your Downloads folder. Then you can open it up in a browser or image editor. Go into Preferences \ Extensions and from here you can turn the extensions on or off, uninstall, or check for updates. If you’re a Safari user, or thinking about trying it, you’ll enjoy proper support for extensions in version 5. At the time of this writing we couldn’t find any extensions on the Apple site, but you might want to keep your eye on it to see if they do start listing them.  Download Safari 5 for Mac & PC Safari Extensions Similar Articles Productive Geek Tips Manage Web Searches In SafariMake Safari Stop Crashing Every 20 Seconds on Windows VistaCustomize Safari for Windows ToolbarMake Your Safari Web Browsing PrivateSave Screen Space by Hiding the Bookmarks Toolbar in Safari for Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

    Read the article

  • Facebook Sponsored Results: Is It Getting Results?

    - by Mike Stiles
    Social marketers who like to focus on the paid aspect of the paid/earned hybrid Facebook represents may want to keep themselves aware of how the network’s new Sponsored Results ad product is performing. The ads, which appear when a user conducts a search from the Facebook search bar, have only been around a week or so. But the first statistics coming out of them are not bad. Marketer Nanigans says click-through rates on the Sponsored Results have been nearly 23 times better than regular Facebook ads. Some click-through rates have even gone over 3%. Just to give you some perspective, a TechCrunch article points out that’s the same kind of click-through rates that were being enjoyed during the go-go dot com boom of the 90’s. The average across the Internet in its entirety is now somewhere around .3% on a good day, so a 3% number should be enough to raise an eyebrow. Plus the cost-per-click price is turning up 78% lower than regular Facebook ads, so that should raise the other eyebrow. Marketers have gotten pretty used to being able to buy ads against certain keywords. Most any digital property worth its salt that sells ads offers this, and so does Facebook with its Sponsored Results product. But the unique prize Facebook brings to the table is the ability to also buy based on demographic and interest information gleaned from Facebook user profiles. With almost 950 million logging in, this is exactly the kind of leveraging of those users conventional wisdom says is necessary for Facebook to deliver on its amazing potential. So how does the Facebook user fit into this? Notorious for finding out exactly where sponsored marketing messages are appearing and training their eyeballs to avoid those areas, will the Facebook user reject these Sponsored Results? Well, Facebook may have found an area in addition to the News Feed where paid elements can’t be avoided and will be tolerated. If users want to read their News Feed, and they do, they’re going to see sponsored posts. Likewise, if they want to search for friends or Pages, and they do, they’re going to see Sponsored Results. The paid results are clearly marked as such. As long as their organic search results are not tainted or compromised, they will continue using search. But something more is going on. The early click-through rate numbers say not only do users not mind seeing these Sponsored Results, they’re finding them relevant enough to click on. And once they click, they seem to be liking what they find, with a reported 14% higher install rate than Marketplace Ads. It’s early, and obviously the jury is still out. But this is a new social paid marketing opportunity that’s well worth keeping an eye on, and that may wind up hitting the trifecta of being effective for the platform, the consumer, and the marketer.

    Read the article

  • Silverlight Cream for May 02, 2010 -- #854

    - by Dave Campbell
    In this Issue: Michael Washington, Jason Young(-2-, -3-), Phil Middlemiss, Jeremy Likness, Victor Gaudioso, Kunal Chowdhury, Antoni Dol, and Jacek Ciereszko(-2-). Shoutout: Victor Gaudioso has aggregated All of My Silverlight Video Tutorials in One Place (revised again 05.02.10) From SilverlightCream.com: Unit Testing A Silverlight 'Simplified MVVM' Modal Popup Michael Washington's latest 'Simplified MVVM' post is published at The Code Project and is on Unit Testing with MVVM. Input Localization in Silverlight without IValueConverter Jason Young sent me some links to posts I've not seen... this first one is on localization by using the Language property of the Root Visual. MVVM – The Model - Part 1 – INotifyPropertyChanged Jason Young's next archive post is the first of a series on MVVM and Silverlight 4 ... implementing a simple ViewModel base class. Silverlight, WCF, and ASP.Net Configuration Gotchas Jason Young worked at tracking down the answers to some forum questions and in the process has produced a post of 'gotchas' with using WCF in Silverlight. A Chrome and Glass Theme - Part 5 Phil Middlemiss has part 5 of his Chrome and Glass Theme tutorial up ... in this one, he's looking at the Progress Bar and Slider. Download the files and play along. Silverlight Out of Browser (OOB) Versions, Images, and Isolated Storage Jeremy Likness has a post up responding to his 3 major questions about OOB apps, and he has to code up for the sample too. New Silverlight Video Tutorial: How to Make a Slide In/Out Navigation Bar – All in Blend Victor Gaudioso's latest video tutorial is on building a Behavior for a Slide in/out Navigation bar... kinda like the menu sliders on my GlyphMap Utility... only easier! Command Binding in Silverlight 4 (Step-by-Step) Kunal Chowdhury has another post up at DotNetFunda, and this time he's talking about Command Binding in Silverlight 4 with an eye toward MVVM usage. The Silverlight PageCurl implementation Antoni Dol has a post up about doing a Page Curl effect in Silverlight. He has a manual up on the effect and full application code. How to center and scale Silverlight applications using ViewBox control Jacek Ciereszko has a couple posts up about centering and scaling your app with the ViewBox control. This first one is a code solution. Source is available, as is a Polish version. Silverlight Center And Scale Behavior Jacek Ciereszko's 2nd post, he provides a Behavior that handles the scaling and centering of the previous post. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • .NET Reflector Pro Coming…

    The very best software is almost always originally the creation of a single person. Readers of our 'Geek of the Week' will know of a few of them.  Even behemoths such as MS Word or Excel started out with one programmer.  There comes a time with any software that it starts to grow up, and has to move from this form of close parenting to being developed by a team.  This has happened several times within Red-Gate: SQL Refactor, SQL Compare, and SQL Dependency Tracker, not to mention SQL Backup, were all originally the work of a lone coder, who subsequently handed over the development to a structured team of programmers, test engineers and usability designers. Because we loved .NET Reflector when Lutz Roeder wrote and nurtured it, and, like many other .NET developers, used it as a development tool ourselves, .NET Reflector's progress from being the apple of Lutz's eye to being a Red-Gate team-based development  seemed natural.  Lutz, after all, eventually felt he couldn't afford the time to develop it to the extent it deserved. Why, then, did we want to take on .NET Reflector?  Different people may give you different answers, but for us in the .NET team, it just seemed a natural progression. We're always very surprised when anyone suggests that we want to change the nature of the tool since it seems right just as it is. .NET Reflector will stay very much the tool we all use and appreciate, although the new version will support .NET 4, and will have many improvements in the accuracy of its decompiling. Whilst we've made a lot of improvements to Reflector, the radical addition, which we hope you'll want to try out as well, is '.NET Reflector Pro'. This is an extension to .NET Reflector that allows the debugging of decompiled code using the Visual Studio debugger. It is an add-in, but we'll be charging for it, mainly because we prefer to live indoors with a warm meal, rather than outside in tents, particularly when the winter's been as cold as this one has. We're hoping (we're even pretty confident!) that you'll share our excitement about .NET Reflector Pro. .NET Reflector Pro integrates .NET Reflector into Visual Studio, allowing you to seamlessly debug into third-party code and assemblies, even if you don't have the source code for them. You can now treat decompiled assemblies much like your own code: you can step through them and use all the debugging techniques that you would use on your own code. Try the beta now. span.fullpost {display:none;}

    Read the article

  • Disable IE 8 Thumbnail Previews on Windows 7 Taskbar

    - by Asian Angel
    The Aero thumbnail previews are a great new feature, but if you are not a fan of the flashy eye-candy, you can get rid of them with a simple tweak. Here is how to do it. Before Here we are…Internet Explorer 8 with a lot of How-To Geek Network goodness ready to go. The Taskbar Thumbnail Previews look very nice, but perhaps they take up too much room for those of you who like to keep things simple. The Taskbar Icon has the classic “fanned edge” look just like any other software with Taskbar Thumbnail Previews active. Disabling the Thumbnail Previews If you want to deactivate the Taskbar Thumbnail Previews for Internet Explorer, it is quite easy and will only take you a few moments to complete. Open IE and go to Tools \ Internet Options. When the Internet Options Window opens you will already be on the General Tab. Under the Tabs Section, click on the Settings button. The Tabbed Browsing Settings window opens. Uncheck Show previews for individual tabs in the taskbar and click OK. When you are returned to the Internet Options Window, click OK once again to totally exit out. Note: A browser restart will be required for the changes to take effect. After you have restarted Internet Explorer, you will see the simple default Taskbar Thumbnail Preview and standard icon look. Conclusion If you have been looking to disable the Taskbar Thumbnail Previews for Internet Explorer, then you are only a few clicks away from satisfaction. If you want to change it back, it is as simple as re-enabling the Show previews for individual tabs in the taskbar setting. Similar Articles Productive Geek Tips Increase the size of Taskbar Preview Thumbnails in Windows 7Vista Style Popup Previews for Firefox TabsWorkaround for Vista Taskbar Thumbnail Previews Not Showing CorrectlyDisable Thumbnail Previews in Windows 7 or Vista ExplorerGet Vista Taskbar Thumbnail Previews in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

  • Customization: It’s Wanted in Enterprise Tech Platforms Too

    - by Mike Stiles
    Did you know that every customer service person does their job the exact same way in every business organization?  And did you know that every business organization cares about the exact same metrics? I hope not, because both those things couldn’t be farther from the truth. And if there are different needs and approaches in different enterprises, it stands to reason technology platforms must become increasingly customizable. Oracle Social Cloud sees that coming and is doing something about it, at least in terms of social media management. Today we introduce Social Station, a customizable user experience workspace within the Oracle Social Relationship Management (SRM) platform. We think a lot about customer-centricity and customer experience around here, and we know our own customers are ready to start moving forward in being able to set up their work environments in the ways that work best for them. That kind of thing increases productivity, helps deliver on social objectives faster, and generally just makes life more pleasant. A recent IDG Enterprise report says that enterprises currently investing in more consumerized, easy-to-use technologies experience a 56% increase in employee productivity and a 46% increase in customer satisfaction. Imagine that. When you make it easier and more pleasant for employees to help customers, more customers get helped and everyone ends up happier. So what does this Social Station do and what does it mean, exactly? It’s an innovative move to take some pretty high-end tech (take a bow developers) and simplify it, making things more intuitive: Drag and drop lets you easily build out and personalize your social workspace with different modules. The new Custom Analytics module can mix and match over 120 metrics with thousands of customizable reporting options. You can check constantly refreshed updates and keep a real-time eye on the numbers you’re trying to move. One-click sharing and annotation in the Custom Analytics module improves sharing and collaboration across teams, departments and executives. Multi-view layout helps you leverage social insights by letting you monitor conversations by network, stream, metric, graph type, date range, and relative time period. The Enhanced Calendar is a better visual representation of content, posts, networks and views, letting you easily toggle between functions and views. The Oracle Social Station sets us up to always be developing & launching additional social modules for you, covering areas like content curation, influencer engagement, and command center creation. Oracle Social Cloud Group VP Meg Bear says, “Consumers today have high expectations of their technology application capabilities and usability, and those expectations don’t stop when they enter their workplaces.” In other words, internal enterprise technology platforms must reflect the personalization and customization being called for in consumer products and marketing. “One size fits all” is becoming an endangered concept. @mikestiles @oraclesocial

    Read the article

  • SQLAuthority News – First SQL Bangalore Event Report – Nov 24, 2012 – SQL Server User Group Bangalore

    - by pinaldave
    A very common question I often receive - Do we have SQL Server User Group in Bangalore? Yes! SQL Bangalore – we had very first meeting on Nov 24, 2012 and very soon we are going to have another User Group meeting. The goal is to keep up a monthly rhythm of User Group meeting. If you are in Bangalore area please join the Facebook page and you will keep on getting regular update about SQL Server. In the very first meeting we have five 30 minute session and had a fantastic time. We had the best of the best speakers presenting all the five sessions. The event was inaugurated by Vinod Kumar M by presenting on T-SQL Pitfalls. His excellent and eye-opening session was followed by Manas Dash. He enlightened everybody with functions introduced in SQL Server 2012. We had a surprise guest from Mumbai – Raj Chaodhary. If you know him he has a very interesting way to present sessions and he presented on SQL Joins. His hard to follow act was followed by Sudeepta who presented on Contained Database. This subject is quite entertaining and interesting. My session was last in order and I was eagerly waiting to present. I had decided to do something new this time so I had created around 52 slides and two demos. I was committed to go over all the 52 slides and both of the demos in 25 minutes of the time. I had interesting story as well. Though, I was a bit nervous I was able to go over a complete slide deck and demo in 25 minutes of the time I had. We also were very fortunate to have international guest Lynn Langit from USA present at the event as well. She presented an overview of the Big Data in very little time – something not everyone can do it efficiently. We are very thankful to our sponsor Pluralsight for awarding USD 300 worth Annual Subscription. It was the most awaited moment of the day. Well, overall we had a great fun with 100+ attendees learning SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

    Read the article

  • Pella Increases Online Appointment Scheduling and Rapidly Personalizes and Updates Marketing Initiatives

    - by Michael Snow
    Originally posted on Oracle Customers page.Oracle Customer: Pella CorporationLocation:  Pella, IowaIndustry: Industrial Manufacturing Employees:  7,100 Pella Corporation is an innovative leader in creating a better view for homes and businesses by designing, testing, manufacturing, and installing quality windows and doors for new construction, remodeling, and replacement applications. A family-owned company, Pella has an 88-year history of innovation and, today, is the second-largest manufacturer in the country of windows and doors, including patio, entry, and storm doors. The company has 10 manufacturing facilities in United States and window and door showrooms across the United States and Canada. In-home consultations are an important part of Pella’s sales process. Several years ago, the company launched an online appointment scheduling tool to improve customer convenience. While the functionality worked well, the company wanted to increase online conversion rates and decrease the number of incomplete, online appointment schedules. It also wanted to give its business analysts and other line-of-business personnel the ability to update the scheduling tool and interface quickly, without needing IT team intervention and recoding, to better capitalize on opportunities and personalize the interface for specific markets. Pella also looked to reduce IT complexity by selecting a system that integrated easily with its Oracle E-Business Suite Release 12.1 enterprise applications.Pella, which has a large Oracle footprint, selected Oracle WebCenter Sites as the foundation for its new, real-time appointment scheduling application. It used the solution to re-engineer the scheduling process and the information required to set up an appointment. Just a few months after launch, it is seeing improvement in the number of appointments booked online and experiencing fewer abandoned appointments during the scheduling process. As important, Pella can now quickly and easily make changes to images, video, and content displayed on the scheduling tool interface, delivering greater business agility. Previously, such changes required a developer and weeks of coding and testing. Today, a member of Pella’s business analyst team can complete the changes in hours. This capability enables Pella to personalize the Web experience for customers. For example, it can display different products or images for clients in different regions.The solution is also highly scalable. Pella is using Oracle WebCenter Sites for appointment scheduling now and plans to migrate Pella.com, its configurator tool, and dealer microsites onto the platform. Further, Pella plans to leverage the solution to optimize mobile devices. “Moving ahead, we expect to extensively leverage Oracle WebCenter Sites to gain greater flexibility in updating the Web experience, thanks to the ability to make updates quickly without developer resources. Segmentation and targeting capabilities will allow us to create a more personalized experience across both traditional and mobile platforms,” said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. A word from Pella Corporation "Oracle WebCenter Sites?from the start?delivered important benefits. We’ve redesigned the online scheduling process and are seeing more potential customers completing consultation bookings online. More important, the solution opens a world of other possibilities as we plan to migrate Pella.com and our dealer microsites to the platform, and leverage it to optimize the Web experience for our mobile devices.” – Teri Lancaster, IT Manager, Customer Experience Applications, Pella Corporation Oracle Product and Services Oracle WebCenter Sites Why Oracle Pella has a long-standing relationship with Oracle. “We look to Oracle first for a solution. Our Oracle account team came to us with several solutions, and Oracle WebCenter Sites delivered the scalability, ease-of-use, flexibility, and scalability that we required for the appointment scheduling initiative and other Web projects on the horizon, including migrating Pella.com and optimizing our site for mobile platforms,”said Teri Lancaster, IT manager, customer experience applications, Pella Corporation. Implementation Process The Pella implementation team, working with Oracle partner Element Solutions, LLC, integrated the appointment setting application with Pella.com as well as the company’s Oracle E-Business Suite customer relationship management applications. Using Oracle WebCenter Site’s development tools and subversion capabilities to develop the application, the Element Solutions and Pella teams could work remotely and collaboratively, accelerating deployment. Pella went live with the new scheduling tool in just six months. Partner Oracle PartnerElement Solutions, LLC Element Solutions was instrumental at every major stage of the project, including design creation and approval, development, training, and rollout. “Element Solutions was a vital partner for our Oracle WebCenter Sites initiative. The team provided guidance, and more important, critical knowledge transfer at every stage?which equipped us to get the most out of this powerful and versatile solution. We were definitely collaboration partners,” Lancaster said. Resources Pella Corporation Upgrades Enterprise Applications to Continue to Improve Manufacturing Efficiency Thousands of Customers Successfully and Smoothly Upgrade to Oracle E-Business Suite 12.1 for New Functionality, Lower Operating Costs and Improved Shared Operations Managing the Virtual World

    Read the article

  • Spotlight on Claims: Serving Customers Under Extreme Conditions

    - by [email protected]
    Oracle Insurance's director of marketing for EMEA, John Sinclair, recently attended the CII Spotlight on Claims event in London. Bad weather and its implications for the insurance industry have become very topical as the frequency and diversity of natural disasters - including rains, wind and snow - has surged across Europe this winter. On England's wettest day on record, the county of Cumbria was flooded with 12 inches of rain within 24 hours. Freezing temperatures wreaked havoc on European travel, causing high speed TVG trains to break down and stranding hundreds of passengers under the English Chanel in a tunnel all night long without heat or electricity. A storm named Xynthia thrashed France and surrounding countries with hurricane force, flooding ports and killing 51 people. After the Spring Equinox, insurers may have thought the worst had past. Then came along Eyjafjallajökull, spewing out vast quantities of volcanic ash in what is turning out to be one of most costly natural disasters in history. Such extreme events challenge insurance companies' ability to service their customers just when customers need their help most. When you add economic downturn and competitive pressures to the mix, insurers are further stretched and required to continually learn and innovate to meet high customer expectations with reduced budgets. These and other issues were hot topics of discussion at the recent "Spotlight on Claims" seminar in London, focused on how weather is affecting claims and the insurance industry. The event was organized by the CII (Chartered Insurance Institute), a group with 90,000 members. CII has been at the forefront in setting professional standards for the insurance industry for over a century. Insurers came to the conference to hear how they could better serve their customers under extreme weather conditions, learn from the experience of their peers, and hear about technological breakthroughs in climate modeling, geographic intelligence and IT. Customer case studies at the conference highlighted the importance of effective and constant communication in handling the overflow of catastrophe related claims. First and foremost is the need to rapidly establish initial communication with claimants to build their confidence in a positive outcome. Ongoing communication then needs to be continued throughout the claims cycle to mange expectations and maintain ownership of the process from start to finish. Strong internal communication to support frontline staff was also deemed critical to successful crisis management, as was communication with the broader insurance ecosystem to tap into extended resources and business intelligence. Advances in technology - such web based systems to access policies and enter first notice of loss in the field - as well as customer-focused self-service portals and multichannel alerts, are instrumental in improving customer satisfaction and helping insurers to deal with the claims surge, which often can reach four or more times normal workloads. Dynamic models of the global climate system can now be used to better understand weather-related risks, and as these models mature it is hoped that they will soon become more accurate in predicting the timing of catastrophic events. Geographic intelligence is also being used within a claims environment to better assess loss reserves and detect fraud. Despite these advances in dealing with catastrophes and predicting their occurrence, there will never be a substitute for qualified front line staff to deal with customers. In light of pressures to streamline efficiency, there was debate as to whether outsourcing was the solution, or whether it was better to build on the people you have. In the final analysis, nearly everybody agreed that in the future insurance companies would have to work better and smarter to keep on top. An appeal was also made for greater collaboration amongst industry participants in dealing with the extreme conditions and systematic stress brought on by natural disasters. It was pointed out that the public oftentimes judged the industry as a whole rather than the individual carriers when it comes to freakish events, and that all would benefit at such times from the pooling of limited resources and professional skills rather than competing in silos for competitive advantage - especially the end customer. One case study that stood out was on how The Motorists Insurance Group was able to power through one of the most devastating catastrophes in recent years - Hurricane Ike. The keys to Motorists' success were superior people, processes and technology. They did a lot of upfront planning and invested in their people, creating a healthy team environment that delivered "max service" even when they were experiencing the same level of devastation as the rest of the population. Processes were rapidly adapted to meet the challenge of the catastrophe and continually adapted to Ike's specific conditions as they evolved. Technology was fundamental to the execution of their strategy, enabling them anywhere access, on the fly reassigning of resources and rapid training to augment the work force. You can learn more about the Motorists experience by watching this video. John Sinclair is marketing director for Oracle Insurance in EMEA. He has more than 20 years of experience in insurance and financial services.

    Read the article

  • Plan Operator Tuesday round-up

    - by Rob Farley
    Eighteen posts for T-SQL Tuesday #43 this month, discussing Plan Operators. I put them together and made the following clickable plan. It’s 1000px wide, so I hope you have a monitor wide enough. Let me explain this plan for you (people’s names are the links to the articles on their blogs – the same links as in the plan above). It was clearly a SELECT statement. Wayne Sheffield (@dbawayne) wrote about that, so we start with a SELECT physical operator, leveraging the logical operator Wayne Sheffield. The SELECT operator calls the Paul White operator, discussed by Jason Brimhall (@sqlrnnr) in his post. The Paul White operator is quite remarkable, and can consume three streams of data. Let’s look at those streams. The first pulls data from a Table Scan – Boris Hristov (@borishristov)’s post – using parallel threads (Bradley Ball – @sqlballs) that pull the data eagerly through a Table Spool (Oliver Asmus – @oliverasmus). A scalar operation is also performed on it, thanks to Jeffrey Verheul (@devjef)’s Compute Scalar operator. The second stream of data applies Evil (I figured that must mean a procedural TVF, but could’ve been anything), courtesy of Jason Strate (@stratesql). It performs this Evil on the merging of parallel streams (Steve Jones – @way0utwest), which suck data out of a Switch (Paul White – @sql_kiwi). This Switch operator is consuming data from up to four lookups, thanks to Kalen Delaney (@sqlqueen), Rick Krueger (@dataogre), Mickey Stuewe (@sqlmickey) and Kathi Kellenberger (@auntkathi). Unfortunately Kathi’s name is a bit long and has been truncated, just like in real plans. The last stream performs a join of two others via a Nested Loop (Matan Yungman – @matanyungman). One pulls data from a Spool (my post – @rob_farley) populated from a Table Scan (Jon Morisi). The other applies a catchall operator (the catchall is because Tamera Clark (@tameraclark) didn’t specify any particular operator, and a catchall is what gets shown when SSMS doesn’t know what to show. Surprisingly, it’s showing the yellow one, which is about cursors. Hopefully that’s not what Tamera planned, but anyway...) to the output from an Index Seek operator (Sebastian Meine – @sqlity). Lastly, I think everyone put in 110% effort, so that’s what all the operators cost. That didn’t leave anything for me, unfortunately, but that’s okay. Also, because he decided to use the Paul White operator, Jason Brimhall gets 0%, and his 110% was given to Paul’s Switch operator post. I hope you’ve enjoyed this T-SQL Tuesday, and have learned something extra about Plan Operators. Keep your eye out for next month’s one by watching the Twitter Hashtag #tsql2sday, and why not contribute a post to the party? Big thanks to Adam Machanic as usual for starting all this. @rob_farley

    Read the article

  • Big Data – Evolution of Big Data – Day 3 of 21

    - by Pinal Dave
    In yesterday’s blog post we answered what is the Big Data. Today we will understand why and how the evolution of Big Data has happened. Though the answer is very simple, I would like to tell it in the form of a history lesson. Data in Flat File In earlier days data was stored in the flat file and there was no structure in the flat file.  If any data has to be retrieved from the flat file it was a project by itself. There was no possibility of retrieving the data efficiently and data integrity has been just a term discussed without any modeling or structure around. Database residing in the flat file had more issues than we would like to discuss in today’s world. It was more like a nightmare when there was any data processing involved in the application. Though, applications developed at that time were also not that advanced the need of the data was always there and there was always need of proper data management. Edgar F Codd and 12 Rules Edgar Frank Codd was a British computer scientist who, while working for IBM, invented the relational model for database management, the theoretical basis for relational databases. He presented 12 rules for the Relational Database and suddenly the chaotic world of the database seems to see discipline in the rules. Relational Database was a promising land for all the unstructured database users. Relational Database brought into the relationship between data as well improved the performance of the data retrieval. Database world had immediately seen a major transformation and every single vendors and database users suddenly started to adopt the relational database models. Relational Database Management Systems Since Edgar F Codd proposed 12 rules for the RBDMS there were many different vendors who started them to build applications and tools to support the relationship between database. This was indeed a learning curve for many of the developer who had never worked before with the modeling of the database. However, as time passed by pretty much everybody accepted the relationship of the database and started to evolve product which performs its best with the boundaries of the RDBMS concepts. This was the best era for the databases and it gave the world extreme experts as well as some of the best products. The Entity Relationship model was also evolved at the same time. In software engineering, an Entity–relationship model (ER model) is a data model for describing a database in an abstract way. Enormous Data Growth Well, everything was going fine with the RDBMS in the database world. As there were no major challenges the adoption of the RDBMS applications and tools was pretty much universal. There was a race at times to make the developer’s life much easier with the RDBMS management tools. Due to the extreme popularity and easy to use system pretty much every data was stored in the RDBMS system. New age applications were built and social media took the world by the storm. Every organizations was feeling pressure to provide the best experience for their users based the data they had with them. While this was all going on at the same time data was growing pretty much every organization and application. Data Warehousing The enormous data growth now presented a big challenge for the organizations who wanted to build intelligent systems based on the data and provide near real time superior user experience to their customers. Various organizations immediately start building data warehousing solutions where the data was stored and processed. The trend of the business intelligence becomes the need of everyday. Data was received from the transaction system and overnight was processed to build intelligent reports from it. Though this is a great solution it has its own set of challenges. The relational database model and data warehousing concepts are all built with keeping traditional relational database modeling in the mind and it still has many challenges when unstructured data was present. Interesting Challenge Every organization had expertise to manage structured data but the world had already changed to unstructured data. There was intelligence in the videos, photos, SMS, text, social media messages and various other data sources. All of these needed to now bring to a single platform and build a uniform system which does what businesses need. The way we do business has also been changed. There was a time when user only got the features what technology supported, however, now users ask for the feature and technology is built to support the same. The need of the real time intelligence from the fast paced data flow is now becoming a necessity. Large amount (Volume) of difference (Variety) of high speed data (Velocity) is the properties of the data. The traditional database system has limits to resolve the challenges this new kind of the data presents. Hence the need of the Big Data Science. We need innovation in how we handle and manage data. We need creative ways to capture data and present to users. Big Data is Reality! Tomorrow In tomorrow’s blog post we will try to answer discuss Basics of Big Data Architecture. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • Silverlight Cream for June 06, 2010 -- #876

    - by Dave Campbell
    In this Issue: Brian Genisio, Michael Washington, Fons Sonnemans , Don Burnett, Xianzhong Zhu, Mike Snow, Jesse Liberty, Victor Gaudioso, David Kelley(-2-), and Matias Bonaventura . Shoutout: Anoop has a good post up: MEF or Managed Extensibility Framework and Lazy – Being Lazy with MEF, Custom Export Attributes etc Jesse Liberty's got a good post up if you are just Getting Started With Silverlight: A Path Through The Learning Material John Papa reports Updates and New Home for Sticky Plugin Tim Heuer announced Silverlight 4 Theme refresh including RIA Services templates From SilverlightCream.com: Adventures in MVVM – ViewModel Location and Creation Brian Genisio has a post up about ViewModels and how he attaches them to his views. Some discssion of MVVMLight, and other external links plus the code for the project. Simplified MEF: Dynamically Loading a Silverlight .xap Michael Washington has a good tutorial up on MEF, Silverlight, and ViewModel. In Michael's words: The goal here is to give you a quick easy win. You will be able to understand this one. You will come away with something you can use, and you will be able to tell your fellow colleagues, "MEF? yeah I'm using that, good stuff Touch Gesture Triggers for Windows Phone 7 projects in Blend 4.0 Fons Sonnemans has a post up about touch gestures for WP7 -- he's got 3 of them implemented using triggers, plus an external link to another, and the source. What the Heck is “MEF” for, and what Silverlight designers need to know about it? Don Burnett is also talking MEF... he does a good job of introducing MEF if you're not acquainted yet, plus some external information. Write Your Custom Effect Components in Silverlight 3 Xianzhong Zhu has a post up walking you through creating your own Custom Effect for Blend and Silverlight 3 ... lots of external links and the source project. Silverlight Tip of the Day #28 – Text Trimming Mike Snow's Tip #28 is about Text Trimming... what it does, and how it differs from WPF Windows Phone 7: Lists, Page Animation and oData Jesse Liberty called this a mini-tutorial, but it's not so mini... great tutorial on WP7, data, lists, and page transitions... oh, and the data is OData too... New Silveright Video Tutorial: How to Do Hit Detection Victor Gaudioso's latest video tutorial is up and he's demonstrating how to do Silverlight HitTesting via code from Andy Beaulieu Dependency Properties Made Easy Need a quick pick-up on Dependency Properties? David Kelley has a short post about them on his blog. Isolated Storage Made Easy David Kelley also has a quick post up about Isolated Storage ... going to keep an eye out for more of these quick "Made Easy" posts from David. Prism 4.0 First Drop – MVVM Matias Bonaventura has a post up about the recent Prism 4.0 drop and highlights a bunch of the features/enhancements in this... some code snippets and a linnk out to the CodePlex drop. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Camera rotation - First Person Camera using GLM

    - by tempvar
    I've just switched from deprecated opengl functions to using shaders and GLM math library and i'm having a few problems setting up my camera rotations (first person camera). I'll show what i've got setup so far. I'm setting up my ViewMatrix using the glm::lookAt function which takes an eye position, target and up vector // arbitrary pos and target values pos = glm::vec3(0.0f, 0.0f, 10.0f); target = glm::vec3(0.0f, 0.0f, 0.0f); up = glm::vec3(0.0f, 1.0f, 0.0f); m_view = glm::lookAt(pos, target, up); i'm using glm::perspective for my projection and the model matrix is just identity m_projection = glm::perspective(m_fov, m_aspectRatio, m_near, m_far); model = glm::mat4(1.0); I send the MVP matrix to my shader to multiply the vertex position glm::mat4 MVP = camera->getProjection() * camera->getView() * model; // in shader gl_Position = MVP * vec4(vertexPos, 1.0); My camera class has standard rotate and translate functions which call glm::rotate and glm::translate respectively void camera::rotate(float amount, glm::vec3 axis) { m_view = glm::rotate(m_view, amount, axis); } void camera::translate(glm::vec3 dir) { m_view = glm::translate(m_view, dir); } and i usually just use the mouse delta position as the amount for rotation Now normally in my previous opengl applications i'd just setup the yaw and pitch angles and have a sin and cos to change the direction vector using (gluLookAt) but i'd like to be able to do this using GLM and matrices. So at the moment i have my camera set 10 units away from the origin facing that direction. I can see my geometry fine, it renders perfectly. When i use my rotation function... camera->rotate(mouseDeltaX, glm::vec3(0, 1, 0)); What i want is for me to look to the right and left (like i would with manipulating the lookAt vector with gluLookAt) but what's happening is It just rotates the model i'm looking at around the origin, like im just doing a full circle around it. Because i've translated my view matrix, shouldn't i need to translate it to the centre, do the rotation then translate back away for it to be rotating around the origin? Also, i've tried using the rotate function around the x axis to get pitch working, but as soon as i rotate the model about 90 degrees, it starts to roll instead of pitch (gimbal lock?). Thanks for your help guys, and if i've not explained it well, basically i'm trying to get a first person camera working with matrix multiplication and rotating my view matrix is just rotating the model around the origin.

    Read the article

  • The Niantic Project: Ingress by Felicia Hajra-Lee

    Despite the current fact that the augmented reality game for Android is still in beta phase, it is amazing to see that the world of literature is already taking momentum on this 'real-life' universe. After reading 'The Alignment: Ingress' by Thomas Greanias it took only a blink of the eye to go for 'The Niantic Project: Ingress' by Felicia Hajra-Lee, too. Here is the review I posted on Amazon.com: Ingress, a parallel universe to our reality, is here. There is no doubt about this anymore... The Niantic Project, originated at the CERN collider in Geneva, Switzerland, got into focus of global players. And the game is hard; fair-play is only for the fainted ones. Felicia understands to drag the audience directly into the action of the Niantic Project and its protagonists. The novella is heavily based on the investigations posted daily on the website of Ingress. She really understands how to interweave the various clues and creates an atmosphere where it sometimes feels challenging to differentiate between fiction and reality. It all starts with 'Epiphany Night' at the Niantic Labs, the high exposure of Exotic Matter (XM) and the escape of scientist Dr. Devra Bogdanovich and 'sentinel' Roland Jarvis. Of course, a new research, or should we name it technology, like the Niantic Project has to be protected and there are multiple parties on the hunt. Throughout the various chapters Felicia introduces new potential buyers from all over the globe, gives us detailed insights on the hunters and their brutal effectiveness to finish an assignment, and manages to keep the reader in high-pitched mode thanks to a couple of turn-arounds in the overall story. Personally, I have to say that I really enjoyed reading this title. Felicia's love to details is absolutely amazing, and sometimes I was really wondering whether she would be one of the assassins. But unfortunately I also have to say that I'm not a great fan of the structural organization of the (title-less) chapters. It is fascinating to follow the ventures of Devra, Farlowe and 855 but occasionally I had to go back to previous paragraphs in order to keep track of the individual plots. Overall a great title, captivating and rich in details but simply too short. Please Fecilia, gives us more to read. As an owner of an Android smartphone or tablet, you should get yourself into the world of Ingress. Check out the Play Store to install the app. Now. ;-)

    Read the article

  • View and Flip Between Firefox Tabs in 3D

    - by Asian Angel
    Are you tired of the default tab switching style in Firefox? Then get ready to enjoy a more visually pleasing 3D experience with the FoxTab extension. Using FoxTab As soon as you have the extension installed, you will see a new toolbar button available beside the address bar. Before going further you may want to look through the viewing styles available in the lower right corner. Note: You can choose to have the FoxTab button appear in the status bar if preferred or use the keyboard (i.e. F12) by itself to launch FoxTab. The grid view with an angled 3D setting. The page flow view with a more frontal look. If the default background color is not to your liking then you can easily change to a new color or insert a background image. After choosing a new background color, making a few adjustments in the options, and opening more tabs things look very nice using the grid viewing style. Followed by the carousel viewing style. And finally the wall viewing style. You can also set up a top sites page using your favorite viewing style. To add a page to the top sites group right click within the webpage and select Add To Top Sites. Just like that your new selection is added in. Keep in mind that we were not able to move/switch positions in the grid during our tests. Options The extension has plenty of options and settings to help you customize FoxTab to your liking. Conclusion FoxTab adds visually pleasing 3D tab switching to Firefox for anyone who loves eye candy and a touch of fun while browsing. Links Download the FoxTab extension (Mozilla Add-ons) Visit the FoxTab Homepage Similar Articles Productive Geek Tips You Really Want to Completely Disable Tabs in Firefox?Quick Hits: 11 Firefox Tab How-TosQuick Tip: Save Windows and Tabs When Restarting FirefoxMake Firefox Use Multiple Rows of TabsQuick Tip: Use Tab Characters in Textarea Boxes in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Single Instance of Child Forms in MDI Applications

    - by Akshay Deep Lamba
    In MDI application we can have multiple forms and can work with multiple forms i.e. MDI childs at a time but while developing applications we don't pay attention to the minute details of memory management. Take this as an example, when we develop application say preferably an MDI application, we have multiple child forms inside one parent form. On MDI parent form we would like to have menu strip and tab strip which in turn calls other forms which build the other parts of the application. This also makes our application looks pretty and eye-catching (not much actually). Now on a first go when a user clicks a menu item or a button on a tab strip an application initialize a new instance of a form and shows it to the user inside the MDI parent, if a user again clicks the same button the application creates another new instance for the form and presents it to the user, this will result in the un-necessary usage of the memory. Therefore, if you wish to have your application to prevent generating new instances of the forms then use the below method which will first check if the the form is visible among the list of all the child forms and then compare their types, if the form types matches with the form we are trying to initialize then the form will get activated or we can say it will be bring to front else it will be initialize and set visible to the user in the MDI parent window. The method we are using: private bool CheckForDuplicateForm(Form newForm) { bool bValue = false; foreach (Form frm in this.MdiChildren) { if (frm.GetType() == newForm.GetType()) { frm.Activate(); bValue = true; } } return bValue; } Usage: First we need to initialize the form using the NEW keyword ReportForm ReportForm = new ReportForm(); We can now check if there is another form present in the MDI parent. Here, we will use the above method to check the presence of the form and set the result in a bool variable as our function return bool value. bool frmPresent = CheckForDuplicateForm(Reportfrm); Once the above check is done then depending on the value received from the method we can set our form. if (frmPresent) return; else if (!frmPresent) { Reportfrm.MdiParent = this; Reportfrm.Show(); } In the end this is the code you will have at you menu item or tab strip click: ReportForm Reportfrm = new ReportForm(); bool frmPresent = CheckForDuplicateForm(Reportfrm); if (frmPresent) return; else if (!frmPresent) { Reportfrm.MdiParent = this; Reportfrm.Show(); }

    Read the article

  • The Loneliest Road in America and the OTN Garage

    - by rickramsey
    Source I never told anyone how the image of the OTN Garage on Facebook came to be. I took the Facebook picture on Route 50 in Nevada, USA, in October of 2010. I was riding from Colorado to Oracle OpenWorld in San Francisco, so it was probably October. Route 50 is known as "The Loneliest Road in America." There are roads across Nevada that have even LESS traffic, but Route 50 still one. desolate. road. Although I have seen stranger things while riding along Nevada's Extraterrestrial Highway, I still run across notable oddities every time I ride Route 50. Like the old man with a bandolero of water bottles jogging along the side of the highway in the middle of the day, 50 miles from the closest town. First ultra-marathoner I'd seen in action. He waved at me. Or the dozen Corvettes with California license plates driving toward me, all doing the speed limit in the middle of nowhere because they were being tailed by half a dozen Nevada state troopers. #fail. I don't remember which town I was in, but I noticed the building when I stopped at the gas station. While standing there pouring fuel into the Harley, the store caught my eye. So I pulled the bike in front and walked inside. The owner is a little old lady, about 100 years old. Most of the goods she had on the shelves looked like they had been placed there during WWII. She was itty bitty and could barely see over the counter, but she was so happy when I bought a bar of Hershey's chocolate that she gave me a five cent discount. I took a few pictures and, when I got back, Kemer Thomson, who sometimes blogs here, photoshopped the OTN Garage and Oil Change signs onto it. The bike is a 2009 Road King Classic with a Bob Dron fairing and a Corbin heated seat. The seat came in handy when I rode home over Tioga Pass. The Road King is a very comfy touring bike with a great Harley rumble. I'm kinda sorry I sold it. When I stopped for fuel about 75 miles down the road at the next town, I peeled back the chocolate bar. I had turned into powder. Probably 50 years ago. - Rick Website Newsletter Facebook Twitter

    Read the article

  • Algorithm for spreading labels in a visually appealing and intuitive way

    - by mac
    Short version Is there a design pattern for distributing vehicle labels in a non-overlapping fashion, placing them as close as possible to the vehicle they refer to? If not, is any of the method I suggest viable? How would you implement this yourself? Extended version In the game I'm writing I have a bird-eye vision of my airborne vehicles. I also have next to each of the vehicles a small label with key-data about the vehicle. This is an actual screenshot: Now, since the vehicles could be flying at different altitudes, their icons could overlap. However I would like to never have their labels overlapping (or a label from vehicle 'A' overlap the icon of vehicle 'B'). Currently, I can detect collisions between sprites and I simply push away the offending label in a direction opposite to the otherwise-overlapped sprite. This works in most situations, but when the airspace get crowded, the label can get pushed very far away from its vehicle, even if there was an alternate "smarter" alternative. For example I get: B - label A -----------label C - label where it would be better (= label closer to the vehicle) to get: B - label label - A C - label EDIT: It also has to be considered that beside the overlapping vehicles case, there might be other configurations in which vehicles'labels could overlap (the ASCII-art examples show for example three very close vehicles in which the label of A would overlap the icon of B and C). I have two ideas on how to improve the present situation, but before spending time implementing them, I thought to turn to the community for advice (after all it seems like a "common enough problem" that a design pattern for it could exist). For what it's worth, here's the two ideas I was thinking to: Slot-isation of label space In this scenario I would divide all the screen into "slots" for the labels. Then, each vehicle would always have its label placed in the closest empty one (empty = no other sprites at that location. Spiralling search From the location of the vehicle on the screen, I would try to place the label at increasing angles and then at increasing radiuses, until a non-overlapping location is found. Something down the line of: try 0°, 10px try 10°, 10px try 20°, 10px ... try 350°, 10px try 0°, 20px try 10°, 20px ...

    Read the article

  • Turn off keyboard back-light Sony (VAIO SVF1521DCXW)

    - by KasiyA
    I have a Sony laptop and I want to turn keyboard back-light off. It doesn't have a shortcut function key for doing this on the keyboard . I can turn off it with VAIO Control Center in Windows but I don't know how can I turn it off in Ubuntu 14.04. There isn't available to me: /sys/devices/platform/sony-laptop/kbd_backlight doesn't exist on my machine. I have this folder /sys/devices/platform/sony-laptop/ and there is three folder one power folder and two shortcut-ed folder driver , subsystem and five file contains battery_care_health , battery_care_limiter , modalias , touchpad and event This is the output of running sudo modinfo sony-laptop: filename: /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko version: 0.6 license: GPL description: Sony laptop extras driver (SPIC and SNC ACPI device) author: Stelian Pop, Mattia Dongili srcversion: 5C6E050349475558A231C59 alias: acpi*:SNY6001:* alias: acpi*:SNY5001:* depends: intree: Y vermagic: 3.13.0-34-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 50:0B:C5:C8:7D:4B:11:5C:F3:C1:50:4F:7A:92:E2:33:C6:14:3D:58 sig_hashalgo: sha512 parm: debug:set this to 1 (and RTFM) if you want to help the development of this driver (int) parm: no_spic:set this if you don't want to enable the SPIC device (int) parm: compat:set this if you want to enable backward compatibility mode (int) parm: mask:set this to the mask of event you want to enable (see doc) (ulong) parm: camera:set this to 1 to enable Motion Eye camera controls (only use it if you have a C1VE or C1VN model) (int) parm: minor:minor number of the misc device for the SPIC compatibility code, default is -1 (automatic) (int) parm: kbd_backlight:set this to 0 to disable keyboard backlight, 1 to enable it (default: no change from current value) (int) parm: kbd_backlight_timeout:meaningful values vary from 0 to 3 and their meaning depends on the model (default: no change from current value) (int) With the suggested command: sudo modprobe -r sony_laptop sudo modprobe -v sony_laptop kbd_backlight=0 Output was: insmod /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko kbd_backlight=0 It doesn't seem to affect the keyboard backlight. And also trying this command: sudo modprobe -v sony_laptop kbd_backlight_timeout=3 kbd_backlight=0 and doesn't seem to effect the keyboard backlight I also test it after restart laptop, And I didn't see any effect too. Important : By default, keyboard backlight is off; when I press a key it turns on and after 15 seconds it turns off again. It's the same result on battery and AC power I followed also http://ubuntuforums.org/showthread.php?t=2139597 and Keyboard backlighting not working on a Vaio VPCSB11FX but didn't work so.

    Read the article

  • Silverlight Cream for March 07, 2011 -- #1055

    - by Dave Campbell
    In this Issue: Max Paulousky, Chris Rouw, David Anson, Jesse Liberty, Shawn Wildermuth, Simon Guindon, and Dhananjay Kumar. Above the Fold: Silverlight: "Faster Databinding in WPF and Silverlight using OptimizedObservableCollection" Simon Guindon WP7: "Phoney Tools Updated (WP7 Open Source Library)" Shawn Wildermuth From SilverlightCream.com: Problems With Sharing Windows Phone 7 Applications Within A Large Group Of Beta Testers Max Paulousky has a post up discussing the issues surrounding beta testing a WP7 app with a large group of testers... and how to pull it all off. WP7 Insights #1: Consuming REST APIs within a WP7 app Chris Rouw is beginning a WP7 series based on his recent experience of getting a client's app into the marketplace. This first in his series is on consuming REST APIs ... lots of good code and explanations. Improving Windows Phone 7 application performance is even easier with these LowProfileImageLoader and DeferredLoadListBox updates David Anson has an update to his LowProfileImageLoader and DeferredLoadListBox after issues brought up by readers... so we all win with the great feedback from alert devs. When Isolated Storage Isn’t Enough Jesse Liberty started looking at Jeremy Likness' Sterling with this post in the WP7 From Scratch series. He starts with downloading it from CodePlex ... great way to get into Sterling if you haven't already. Phoney Tools Updated (WP7 Open Source Library) Shawn Wildermuth has the latest drop of his Phoney Tools up... this is the last Alpha. I've added a tag for it as well. He's fixed some things, added others... check out the post and go grab the code. Faster Databinding in WPF and Silverlight using OptimizedObservableCollection Simon Guindon is a blogger I've not been following, but this post on an OptimizedObservableCollection caught my eye. He added an AddRange() to the ObservableCollection to get a speed enhancement when adding items... and a pretty good speed enhancement it is. Reading files asynchronously using WebClient class in Silverlight Dhananjay Kumar is another prolific blogger that I've not been following, so we'll start with his latest... a step-by-step guide to reading an XML file asynchronously. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • What Am I doing for my 5 months 1 week old baby for his first cold?

    - by Rekha
    With my limited friends circle with babies, I heard that babies in their fifth month usually gets affected by cold all of a sudden. This is unavoidable and I feel it is good for the babies as they start developing their immune system right on. We usually take our son for a small walk so that he is able to explore the world out there. We have been taking him for a stroll almost everyday since we was 3 months old. But only now he is getting his first cold. So things happen only now I think. Till that day I had somehow brought some routine for him for his feed and naps during day time. Night time is still sleepless ones anyway. So when he first got his cold, that night it went on as usual getting up every few hours. From the next day on, he stopped feeding at the usual time. In the night he goes for 8-10 hours between feeds but still wakes up every two hours and cries for about 10 minutes and when we lift him for sometime, he goes back to sleep. Now to the point what all to expect: * Babies starts feeding frequently * Babies spit up increases * They dislike the food they liked before (we have just started solid foods as per our pediatricians advice) * Since they cannot breathe properly, they cannot sleep for a long time *Pees and poops less frequently. What all we did for our baby to make him comfortable during this time: * Feed the baby less quantity and more frequently whenever they expect to feed (Do not follow the schedule) * When the quantity is less, spit ups is also less * If the baby does not like the food (vegetable or fruit), avoid them till they get back to normal * Try to elevate their head while sleeping ( we used the cradle – sitting position, bouncer, car seat and finally all four sides we placed firm pillows so that he does not roll and kept a pillow for his head till his hip – this one is recommended usually but we have an eye on him always) * No need for any medicines – it will take a week for them to get back to normal whether or not we gives medicines * We applied home made Cold Reliever (heat 2 teaspoons of coconut oil with a small camphor piece till the camphor disappears – then cool the mixture) on his chest, back, neck and feet and covered the feet with socks in the nights * Bathe him everyday – hot (that your baby can withstand) *  Whenever possible give him a steam bath (open the hot showers for sometime in the bathroom and close the doors. When the steam is bearable, close the shower and take the baby inside the bathroom for sometime) * Also use a bulb syringe provided in the hospital to clear the nose (use some saline water drops for ease) * Cuddle him when he cries But please do take him to his doctor if he has fever and other symptoms other than cold or the cold persists for more than 5 – 7 days. Image Credit : MiriamBJDolls

    Read the article

  • Rant on EDI

    - by Anthony Trudeau
    Originally posted on: http://geekswithblogs.net/tonyt/archive/2013/06/27/153261.aspxMy post this month is a rant and not something informational. I hope y'all will forgive me.It's been a slow month. I was on vacation with my daughter for the middle part of the month. And the rest of my time has been preparing for a major ERP upgrade, and dealing with a last minute surprise from a customer that has EDI changes.The subject of EDI is my rant. I was tossed into EDI years ago by the same customer. I understood the basic concepts, but not details -- implementation or otherwise. I started with my network including a couple of people with EDI experience. And for one that was all she did. She was my first taste of what seems to be a protected group.I started looking for the standards with a budget in mind, or rather a lack of budget. See whenever someone stone walls you like that it tells me that what they're doing isn't as mystical as they'd like you to believe. Real magic doesn't need to be kept secret. And that is the case with EDI; however, the EDI industry tries to protect it. You cannot even download the standards. They cost thousands of dollars.All this does is ensure that they continue to rack up consulting dollars from their ignorant clients. Well sirs and madams, I put my finger in your eye. I developed my own translator. And while it's not robust enough to resell due to the limited scope of information I could gather. It did save my employer tens if not over a hundred thousand dollars.My public service message, therefore is as follows. Don't be afraid to tackle implementing EDI if you're even a semi-competent developer. You need some experience parsing, familiarity with your business system, and a little patience. Also, pick your VAN well. Don't fall into the trap of thinking that the biggest names are the best choice. That was a costly mistake for us that we are stuck with for a couple more years.

    Read the article

  • Handy SQL Server Function Series: Part 1

    - by Most Valuable Yak (Rob Volk)
    I've been preparing to give a presentation on SQL Server for a while now, and a topic that was recommended was SQL Server functions.  More specifically, the lesser-known functions (like @@OPTIONS), and maybe some interesting ways to use well-known functions (like using PARSENAME to split IP addresses)  I think this is a veritable goldmine of useful information, and researching for the presentation has confirmed that beyond my initial expectations.I even found a few undocumented/underdocumented functions, so for the first official article in this series I thought I'd start with 2 of each, COLLATIONPROPERTY() and COLLATIONPROPERTYFROMID().COLLATIONPROPERTY() provides information about (wait for it) collations, SQL Server's method for handling foreign character sets, sort orders, and case- or accent-sensitivity when sorting character data.  The Books Online entry for  COLLATIONPROPERTY() lists 4 options for code page, locale ID, comparison style and version.  Used in conjunction with fn_helpcollations():SELECT *, COLLATIONPROPERTY(name,'LCID') LCID, COLLATIONPROPERTY(name,'CodePage') CodePage, COLLATIONPROPERTY(name,'ComparisonStyle') ComparisonStyle, COLLATIONPROPERTY(name,'Version') Version FROM fn_helpcollations()You can get some excellent information. (c'mon, be honest, did you even know about fn_helpcollations?)Collations in SQL Server have a unique name and ID, and you'll see one or both in various system tables or views like syscolumns, sys.columns, and INFORMATION_SCHEMA.COLUMNS.  Unfortunately they only link the ID and name for collations of existing columns, so if you wanted to know the collation ID of Albanian_CI_AI_WS, you'd have to declare a column with that collation and query the system table.While poking around the OBJECT_DEFINITION() of sys.columns I found a reference to COLLATIONPROPERTYFROMID(), and the unknown property "Name".  Not surprisingly, this is how sys.columns finds the name of the collation, based on the ID stored in the system tables.  (Check yourself if you don't believe me)Somewhat surprisingly, the "Name" property also works for COLLATIONPROPERTY(), although you'd already know the name at that point.  Some wild guesses and tests revealed that "CollationID" is also a valid property for both functions, so now:SELECT *, COLLATIONPROPERTY(name,'LCID') LCID, COLLATIONPROPERTY(name,'CodePage') CodePage, COLLATIONPROPERTY(name,'ComparisonStyle') ComparisonStyle, COLLATIONPROPERTY(name,'Version') Version, COLLATIONPROPERTY(name,'CollationID') CollationID FROM fn_helpcollations() Will get you the collation ID-name link you…probably didn't know or care about, but if you ever get on Jeopardy! and this question comes up, feel free to send some of your winnings my way. :)And last but not least, COLLATIONPROPERTYFROMID() uses the same properties as COLLATIONPROPERTY(), so you can use either one depending on which value you have available.Keep an eye out for Part 2!

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >