Search Results

Search found 18301 results on 733 pages for 'network'.

Page 30/733 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • On a local network, are you able to password protect certain folders and how (in windows xp)?

    - by Derek
    I have a local network set up for my small office which consists of me, the manager, my wife, the secretary, and a few sales people/others. I would like to share passwords over the network and other such things privately to my wife, the secretary, but would not like the sales people and others to have access to it, yet I need the others to have access to other folders/documents that I'd like to share. How would I go about doing this if not by password? Thanks in advance

    Read the article

  • How to track a network users accessability on a document?

    - by BigBoy
    We have a document on common folder (Linux as server) on a network which can be accessed by log-in users. Is there way to track the users who really accessed (read/copy operations only) the document? We can log the users who accessed the network, but not sure if they really viewed/copied the document. How can we check this?

    Read the article

  • What can SNMP be useful for in a small network?

    - by Sanoj
    I have been administering servers and clients in small business offices, and have never used SNMP. But I have read about it and it looks interesting. As what I understand, it is mostly useful if you have a bigger network with a lot of network equipment that should be monitored. Is there any useful use cases for SNMP in smaller networks? And is it recommended that I use it?

    Read the article

  • What is the best way/tool to analyze raw data(network stats) from Simulation?

    - by user90500
    After running a simulation(using a simulator(QualNet)) of a simulated network I end up with ip stats stored in a database, I then extract the data to a csv file So now I have 750mb of raw network stats(time stamp, packet id, source ip, source port, protocol, etc). What are the common ways of analyzing large amounts of data like above, if you want to know things like packet loss, throughput, delay, congestion, etc.

    Read the article

  • What does it mean whether network device is Loopback?

    - by Gtker
    Does it mean that the Loopback device handles the request like ping localhost ? If so, there should be at least one device that's loopback,but seems none of my two network device is Loopback: rpcap://\Device\NPF_{45D5ADA0-095E-49F3-BEA1-E8754390F2D4} Description: Network adapter 'Intel(R) PRO/Wireless 2200BG Network Conne ction (Microsoft's Packet Scheduler) ' on local host Loopback: no rpcap://\Device\NPF_{783C5467-4026-473C-86A0-5E5A3708C624} Description: Network adapter 'Realtek RTL8169/8110 Family Gigabit Ethern et NIC (Microsoft's Packet Scheduler) ' on local host Loopback: no Can someone clarify all this?

    Read the article

  • Windows 7 Unidentified Network problem. Cannot connect to the internet.

    - by Gordon
    This is my first time on this website, but I was told this was a good place to ask this. I basically have a problem with Windows 7 connecting to my home network. It keeps identifying my home network as unidentified, and it continually does "identifying" until it simply say cannot connect to the Internet. I don't know how this problem occurred. It simply happened one morning. I am running Windows 7 Ultimate. I have a Realtek Network adapter. I don't think its the drivers. I have already tried system restore to a date when my computer was working fine but it still didn't fix the problem. From what Ive read online there was this bug in the services.msc area, something to do with Bonjour service. I cannot find either so I do not think that was the problem. I'll be online for a while, so I can provide any additional details if needed. I don't really know how to explain it because its so fudging complicated. I really appreciate clear and open steps to solving this. I have tried some things like system restore and rolling back drivers, doesn't seem to help.

    Read the article

  • Share Folders & Files Between Vista and XP Machines

    - by Mysticgeek
    Since Microsoft has three operating systems in use, chances are you’ll find yourself needing to share files between XP, Vista, Windows 7, or some combination of the three. Here we take a look at sharing between a Vista and XP on your home network. Share Without Password Protected Sharing If you’re not worried about who’s accessing the files and folders, the easiest method is to disable Password Protected Sharing. So on the Vista machine open Network and Sharing Center. Under Sharing and Discovery make sure Network Discovery, File Sharing, and, Public Folder Sharing are turned on. Also turn off Password Protected Sharing… Now go into the Vista Public folder, located in C:\Users\Public, and add what you want to share or create a new folder. In this example we created a new folder called XP_Share and added some files to it. On the XP machine go into My Network Places and under Network Tasks click on View Workgroup Computers. Now you’ll see all of the computers on your network which should be part of the same Workgroup. Here we need to double-click on the Vista computer. And there we go…no password to enter so we can access the XP_Share folder or anything else that is located in the Public folder. Share with Password Protected Sharing If you want to keep Password Protected Sharing turned on, then we need to do things a little different. When it’s turned on and you try to access the Vista machine from XP, you’re prompted for a password, and no matter what you think the credentials are, you can’t get access…very annoying. So what we need to do is add the XP Machine as a user. Right-click on Computer from the Start Menu or desktop icon and select Manage from the context menu. The Computer Management screen opens up and you want to expand Local Users and Groups, then the Users folder. Then right-click any open area an select New User. Now create a new user name and password, you can also fill in the other fields if you want. Then make sure to uncheck User must change password at next logon and check the box next to Password never expires. Click the Create button and close out of the New User screen. You’ll then see the new user we created in the list and you can close out of the Computer Management window. Now back on the XP computer when you double-click on the Vista machine, your prompted to log in. Just type in the username and password you just created. Now you’ll have access to the Public folder contents. Set up Sharing on XP If you want to access a shared folder from the Vista computer located on the XP machine, it’s the same process in reverse. On the XP computer in Shared Documents, right-click on the folder you want to share and select Sharing and Security. Then select the radio button next to Share this folder and click Ok. Go into Computer Management and create a new user… Now from the Vista machine double click on the XP machine icon, enter the password, then access the folders and files you need. If you have multiple versions of Windows on your home network, you’ll now be able to access files and folders from each of them. If you want to share between Windows 7 and XP check out our article on how to share files and printers between Windows 7 and XP. You might also want to check out our article on how to share files and printers between Windows 7 and Vista. Similar Articles Productive Geek Tips Show Hidden Files and Folders in Windows 7 or VistaHow To Share Files and Printers Between Windows 7 and VistaShare Files and Printers between Windows 7 and XPHow To Share a Folder the XP Way in Windows VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs The Wearing of the Green – St. Patrick’s Day Theme (Firefox) Perform a Background Check on Yourself

    Read the article

  • Friday Spotlight: Network Troubleshooting with Oracle Linux

    - by Chris Kawalek
    Happy Friday, everyone! Our Spotlight this week is on a fantastic new article by Oracle's Robert Chase and posted on Oracle Technology Network. The article steps through, with command line examples, several strategies for tracking down network connectivity issues. From the article: "When applications that use network connectivity for communication are not working, the cause is often a mystery. Despite advances in modern operating systems, many users believe there is no way to directly "see" what's going over the wire, and that often leads to confusion and difficulties when something goes wrong. The reality is that you can actually see what's going over the wire, and there are a number of tools built into Oracle Linux for troubleshooting network issues. This article will help solve some of the mystery and make network connectivity a bit more user friendly." I highly recommend checking this article out, it's a good one! Network Troubleshooting with Oracle Linux  We'll see you next week! -Chris 

    Read the article

  • Have to run sudo dhclient eth0 automatically every boot

    - by Fyksen
    I just installed ubuntu 12.04.1 alternative install (for raid 0 on some disks). I Have some problems with the net. I'm at school, we use cable, and it got IPv6. If I run ifconfig eth0 heres my output: eth0 Link encap:Ethernet HWaddr e0:cb:4e:87:ff:db inet addr:128.39.194.217 Bcast:128.39.194.223 Mask:255.255.255.224 inet6 addr: 2001:700:1100:8008:e2cb:4eff:fe87:ffdb/64 Scope:Global inet6 addr: fe80::e2cb:4eff:fe87:ffdb/64 Scope:Link inet6 addr: 2001:700:1100:8008:48f7:c23:1d87:da6c/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1063378 errors:0 dropped:0 overruns:0 frame:0 TX packets:489811 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1577173461 (1.5 GB) TX bytes:37043669 (37.0 MB) Interrupt:68 Base address:0x6000 My /etc/network/interfaces look like this: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 # NetworkManager#iface eth0 inet dhcp # NetworkManager#hostname 2001:700:1100:1::4 # This is an autoconfigured IPv6 interface iface eth0 inet6 auto (I had to remove the hash tags, because of the BIGFONT i get on ask ubuntu) The "network manager" says that I'm not connected. Let me know if you need any more information. :)

    Read the article

  • /etc/resolv.conf nameserver fd00::1

    - by user88631
    My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

    Read the article

  • Uploading or attaching files that located on a shared drive doesn't work?

    - by Alex
    I have this odd, quite minor, but annoying issue that I am quite perplexed about. Whenever I try to upload a file via my browser(let's say attach a file to an email in GMail), I click 'Browse' button and it opens standard file selection dialog, that doesn't show network drives. Further more if I try to drag a file from a network drive into GMail, it doesn't work either, it just doesn't let me do that. This issue has been around for quite sometime now, and I am just curious if this is something on my side or if it's a bug or a misconfiguration of some sort. FWIW, I am currently running 10.10, network drive is a samba share on NAS. This happens in FF and Chrome and this is only happens with Samba mounts. As a matter of fact, NFS volumes that are located on the same network operate perfectly fine.

    Read the article

  • Cannot make wireless "forget" networks to which it cannot connect

    - by cboettig
    I see that I can delete networks that my machine "remembers" from nm-applet by clicking on the wireless icon in the panel and selecting "edit connections" - "wireless". However, sometimes I click on the wrong wireless connection by accident in the dropdown list. If the connection is secure, the machine of course never successfully connects, but somehow it still seems to memorize the ESSID. Whenever I'm in range of that wireless, it now tries to connect. Worse, if not connected to any other network, it repeatedly prompts me to connect to this network. If left unattended, I may find dozens of copies of the window prompting me to log in to this mistaken network. There must be a file somewhere that records this connection ID, but I cannot find it. The only connections appearing in the "edit connections" I mention above are those to which I've actually connected. How do I find the file and delete the line corresponding to the offending "memorized" network?

    Read the article

  • How much packet loss is normal?

    - by Fabian
    I started monitoring our network using SmokePing. Users occasionally complain about bad network connections, but the problems went away after some minutes usually. I now wanted to get some more quantitative information about those problems. SmokePing regularly pings servers inside our network, in a connected network and outside hosts. I only have a limited amount of control over our internal network and none at all for the connection to the outside and to the second network. I now see quite often (2-4 times a day) that packets to the second network and the outside are dropped. Most of the times it is 1-2 packets out of 20, sometimes more. Inside our internal network no packets are dropped. Is this an expected amount of packet loss, or does it indicate that something is wrong? I'm mainly wondering if I should bother the university IT department about it, or if I should just accept it as it is.

    Read the article

  • How to completely remove wicd from 12.04?

    - by danijelc
    I had issues with WiFi so I removed Network Manager. I booted Windows OS (dual booting Windows 7 and 12.04) to download wicd 1.7.2.4. Extracted it and installed. However, wcid worked properly with Wired Connection but could not connect to WiFi. So, I re-installed Network Manager which works properly now, and wicd connects to WiFi too. As soon as I disconnect from Network Manager, wicd connects only to wired. At this point, I wanted to remove wicd but apt-get returns no wicd installed, can't see it in Synaptic or Software Center, but only in Applications list under Dash home. Of course wcid icon shows connections, and resulting connected, so my system shows both applets for wicd and network manager in the top panel. When running dpkg commands, wicd is not listed as installed package. Any suggestion how to remove wicd? Consider that I started with Ubuntu just few months ago so my knowledge base is limited.

    Read the article

  • MacBook Pro with OSX 10.6.3 (Snow Leopard) Wi-Fi network connection breaks after few minutes

    - by Yanick Landry
    I have a MacBook Pro with OSX 10.6.3 (Snow Leopard). After connecting on a Wi-Fi network, the connection "breaks" after a few minutes. What I mean by "breaking" is that all requests, whether it is loading a web page, connecting to a share folder, connecting to my local router at 192.168.0.1, or pinging anything doesn't get through (time out). When in a "break" situation, I can see in the Network Settings panel that I still have an active IP, which I can successfully ping. I have this problem at home with a router D-Link DI-624 and at work with a D-Link WBR-2310, all with updated firmwares. I thought DHCP was the issue. So I tried assigning a fixed IP address (192.168.0.166). It successfully connects, but after a few minutes, the connection still breaks. The solution I'm currently using is that I disable the AirPort (on the Network icon menu in the top bar), wait a few seconds then re-enable it. It then quickly works, but the connection still breaks after a few minutes. I tried Googling my problem but I think I can't find any good keywords ! It's my first question here, so sorry if I don't respect some rules.

    Read the article

  • Network configuration problem

    - by Musti
    in my dorm I have to change network configuration and then if it is successfull, I have to enter a user name and password for wired internet connection. Anyway, I had many attempts but I couldnt achieve, and please look at my steps and tell me if there is something wrong and at the end there is an error, but I really dont have any idea about this error. (I am a new ubuntu user, and network is far away of my interests) 1) /etc/network/interfaces auto eth0 iface eth0 inet static address 172.030.014.038 netmask 255.255.255.252 network 192.168.2.0 broadcast 192.168.2.255 gateway 172.030.014.038 2) sudo gedit /etc/resolv.conf nameserver 010.050.001.001 nameserver 010.050.001.002 3) /etc/init.d/networking stop Deconfiguring network interfaces... [ OK ] 4) /etc/init.d/networking restart Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces Reconfiguring network interfaces... 172.030.014.038: Unknown host ifconfig: `--help' gives usage information. Failed to bring up eth0 Note: IP-address, netmask, gateway, Preferred DNS server and Alternate DNS server ara given by the management of Dorm. It wad very easy in windows but I couldnt achieve in Ubuntu. I also tried to edit from "edit connections" but the save button is gray and I cannot save it. Thanks in advance. / Musti

    Read the article

  • how to find 3g modem signal strength with out AT commands?

    - by neckTwi
    when i try to find signal strength of my modem using AT+CSQ, the usb device is locked by the network manager. To find the signal strength with AT+CSQ i have to first disable network connection using #nmcli nm wwan off to unlock the device inode /dev/ttyUSBX. Is there any nmcli option to get signal strength or any other option? EDIT The gdbus object for NetworkManager don't have any method like getSignalStrength. Network manager is locking device file preventing to use AT commands. nm-applet was able to display signal strength in system tray. so there should be a way to get signal strength form network manager! nmcli is command line counter part of nm-applet. Can i get signal strength using nmcli? nothing about signal strength is mentioned in its man pages.

    Read the article

  • Neural network input preprocessing

    - by TND
    It's clear that the effectiveness of a neural network depends strongly on the format you give it to work with. You want to preprocess it into the most convenient form you can algorithmically get to, so that the neural network doesn't have to account for that itself. I'm working on a little project that (surprise!) is going to be using neural networks. My future goal is to eventually use NEAT, which I'm really excited about. Anyway, one of my ideas involves moving entities in continuous 2D space, from a top-down perspective (this would be a really cool game AI). Of course, unless these guys are blind, they're going to be able to see the world around them. There's a lot of different ways this information could be fed into the network. One interesting but expensive way is to simply render a top-down "view" of things, with the entities as dots on the picture, and feed that in. I was hoping for something much simpler to use (at least at first), such as a list of the x (maybe 7 or so) nearest entities and their position in relative polar coordinates, orientation, health, etc., but I'm trying to think of the best way to do it. My first instinct was to order them by distance, which would inherently also train the neural network to consider those more "important". However, I was thinking- what if there's two entities that are nearly the same distance away? They could easily alternate indexes in that list, confusing the network. My question is, is there a better way of representing this? Essentially, the issue is the network needs a good way of keeping track of who's who, while knowing (by being inputted) relevant information about the list of entities it can see. Thanks!

    Read the article

  • Gigabit network limited to 25MB/s by CPU. How to make it faster?

    - by netvope
    I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? The other computers in the network can usually transfer at 50+MB/s without problems. And a minor question: How can I find out what is the driver in use for eth0?

    Read the article

  • Connection to openVPN Access Server

    - by Beig
    we are using an openVPN Access Server and I would like to connect to it via the VPN network setting (network-manager-openvpn). I downloaded the client.ovpn and I can connect to the server via the command line: openvpn --script-security 2 --config client.ovpn How can I add the connection to the network manager? Which (key) entry is which? User Cert, CA Cert, Private Key? Here is an example of the client.ovpn http://nopaste.info/c10ec207f2.html Thanks in advance.

    Read the article

  • NM applet dropdown options not working

    - by Prarobo
    I recently realized the dropdown options from my nm-applet are no longer working. But I can still control the network configuration by going through the dash. This happened very recently. I only realized this before a week. I guess some recent update screwed it up. I have these related packages installed network-manager-gnome 0.9.4.1-0ubuntu2 libnm-gtk0 0.9.4.1-0ubuntu2 network-manager 0.9.4.0-0ubuntu4.1 Any help would be great.

    Read the article

  • Network Your Computers & Devices: Step by Step

    - by The Geek
    If you’re looking for a great book to help you learn more about Windows home networking, there’s a new book on the market by our good friend Ciprian, and published by none other than Microsoft Press. Note: our friend Ciprian has been a guest contributor here on How-To Geek in the past, and he’s not only a geek that knows what he’s talking about, he’s also one of the more honest and decent people I’ve worked with. In his spare time, he runs the 7 Tutorials web site. The Book One of the great things about this book is that you aren’t limited to just Windows networking—it also explains how to connect Windows 7, XP, Vista, Mac OS X, and even Linux on the same network and share folders and devices between them. Everything in the book is written in a typical How-To Geek step-by-step format, with plenty of screenshots and pictures to help you through the process. Book Outline If you’re going to be spending some money on the book, you probably want to know what it’s all about, and since the Amazon page doesn’t give, well, much information at all, here’s the entire outline for you: Setting Up a Router and Devices Setting User Account on All Computers Setting Up Your Libraries on All Windows 7 Computers Creating the Network Customizing Network Sharing Settings in Windows 7 Creating the Homegroup and Joining Windows 7 Computers Sharing Libraries and Folders Sharing and Working with Devices Streaming Media Over the Network and the Internet Sharing Between Windows XP, Windows Vista, and Windows 7 Computers Sharing Between Mac OS X and Windows 7 Computers Sharing Between Ubuntu Linux and Windows 7 Computers Keeping the Network Secure Setting Up Parental Controls Troubleshooting Network and Internet Problems It’s a great book, with loads of information, and compared to most tech books isn’t very expensive—only $19.79 for the paperback and $9.99 for the Kindle version. Well worth it, and hey, it’s an official Microsoft Press book—written by a How-To Geek guest author. Network Your Computers & Devices Step by Step [Amazon] Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video] BotSync Enables Secure FTP File Synchronization on Android Devices Enjoy Beautiful City Views with the Cityscape Theme for Windows 7 Luigi Installs Any OS on Google’s Cr-48 Notebook DIY iPad Stylus Offers Pen-Based Interaction on the Cheap

    Read the article

  • Oracle Social Network Developer Challenge: HarQen Nodal

    - by Kellsey Ruppel
    Originally posted by Jake Kuramoto on The Apps Lab blog. We wrapped the Oracle Social Network Developer Challenge last week at OpenWorld, and this week, I’ll be sharing all the entries. All the teams that entered our challenge did a ton of work and built really interesting integrations with Oracle Social Network, and I want to showcase their hard work and innovative ideas. Today, I give you Nodal from the HarQen (@harqen) team, Kris Gösser (@krisgosser), Jesse Vogt (@jesse_vogt) and Matt Stockton (@mstockton). The guys from HarQen built Nodal to provide a visual way to navigate your connections and conversations in Oracle Social Network and view relationships. Using Nodal, you can: Search through names and profiles in Oracle Social Network. Choose people and view their social graphs in a visually useful way. Expand nodes in the social graph and add that person’s social graph to the Nodal view for comparison. Move nodes around and lock them in place for easier viewing, using a physics engine for movement. Adjust the physics engine properties according to your viewing preferences. Select nodes in the social graph and create a conversation directly based on the selection. Here are some shots of Nodal. They really don’t do the physics engine justice, but maybe the guys at Harqen will post a video of what they did for your viewing pleasure. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; }   Nodal’s visuals wowed the judges and the audience, and anyone with a decent-sized social network presence understands the need for good network visualization. Tools like Nodal allow you to discover hidden connections in your network and maximize the value of your weak ties and find mavens, a very important key to getting work done. Thanks to the HarQen team for participating in our challenge. We hope they had a good experience. Look for the details of the other entries this week.

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >