Search Results

Search found 3710 results on 149 pages for 'protocol analyzer'.

Page 30/149 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • EBS ATG Advisor Webcasts - FREE!

    - by cwarticki
    For June 2012 we have scheduled 2 Webcasts - E-Business Suite OAM Overview and Usage session and the E-Business Suite Workflow Avisor.  We are driving 2 sessions for a better global alignment. E-Business Suite - OAM Overview and Monitoring   Agenda Oracle Applications Manager (OAM) Overview Log files Diagnostics and Logging Concurrent processing through OAM Applications Dashboard Troubleshooting Patch Management. Patch Wizard OAM "How To" Documents Questions &Answers EMEA Session : July 10, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466056.1 Direct link to register in WebEx US Session : July 11, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466057.1 Direct link to register in WebEx E-Business Suite - Workflow Analyzer - Follow-Up Agenda Overview of Workflow Analyzer Enhancements implemented in the latest Release Questions & Answers EMEA Session : July 24, 2012 at 09:00 AM UK / 10:00 AM CET / 13:30 India / 17:00 Japan / 18:00 Australia Details & Registration : Note 1466058.1 Direct link to register in WebEx US Session : July 25, 2012 at 18:00 UK / 19:00 CET / 10:00 AM Pacific / 11:00 AM Mountain/ 01:00 PM Eastern Details & Registration : Note 1466059.1 Direct link to register in WebEx Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

    Read the article

  • Thinkpad speaker turns mute - Linux Codec issue?

    - by Curlew
    At some point a few days ago the speakers on my Lenovo Thinkpad T410 (Model number: 2537A11) suddenly stopped working randomly. This error happens every time I watch a video or listen to a music file. The sound just abruptly stops. At the moment, I can't produce a single sound no matter what I do. I am using Debian GNU/Linux on this laptop and there doesn't appear to be anything else wrong (the fan is working, no abnormal heat (staying around ~40°C), no other obvious errors or problems). Here is the output of a nice program someone pointed me to: martin@martin:~/Downloads$ sudo python run.py --monitor Using temporary directory: /dev/shm/hda-analyzer You may remove this directory when finished or if you like to download the most recent copy of hda-analyzer tool. Downloading file hda_analyzer.py Downloading file hda_guilib.py Downloading file hda_codec.py Downloading file hda_proc.py Downloading file hda_graph.py Downloading file hda_mixer.py Downloaded all files, executing hda_analyzer.py Watching 1 cards ====================================== Sound is working normally and then it stops and the following lines appear: Diff for codec 0/0 (0x14f15069): --- +++ @@ -164,17 +164,17 @@ Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00000010: OUT Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT - Power: setting=D0, actual=D0 + Power: setting=D3, actual=D3 Connection: 2 0x10* 0x11 Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE And now there is also an error in the dmesg output hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. I changed the bdl_pos_adj to various numbers (-1, 0, 64, 1024) and either there is no change at all or dmesg reports that the adjustment is too big. I wonder if this bdl_pos_adj is the real reason for the error. Here is my hardware information provided by alsa-info.sh website. Okay, i did some serious testing and even installed Windows and now i officially conclude that this is a hard-ware related issue with my Laptop speakers. Reason: The error occurs in my installed Debian Linux, an Ubuntu Live distribution and Windows XP No error-message appears in all of the OS. The sound just keeps running and i can't hear a thing. I tested different setups, including OSS, ALSA and the pulseaudio server on top If i use my new usb-headphones i can hear sound all the time without any sudden silences. So obviously, although hard to believe, my laptop speakers are not okay (never heard of similar cases). I'll award the bounty to anyone who can point me to good tutorials or the procedure how to exchange my T410 speakers (i still have warranty. The laptop was bought in Germany, but now i am in Denmark). Or to someone who can explain me the output from hda-analyzer (big log above).

    Read the article

  • Pentium 4 Computer Won't Power Up

    - by Harvey
    I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

    Read the article

  • Microsoft veut connecter producteurs de données et développeurs webs avec un SDK pour son protocole

    Un SDK pour l'Open Data Protocol et une CTP2 pour Dallas Microsoft tente de mettre en contact producteurs de données et développeurs de services webs Pour concevoir des services webs, il faut des données. C'est à ce problème que Microsoft entend apporter une solution avec l'Open Data Protocol et Dallas, une place de marché qui s'appuie sur la plateforme Web Microsoft Azure. Pour pouvoir concevoir des applications (mobiles, Web et multiplateformes) capables d'utiliser des données en provenance du Cloud, Microsoft a décidé de mettre à disposition développeurs des SDK (kits de développement logiciel ) pour OData. L'approche est fondée sur Atom et HTTP pour la portabilité des ...

    Read the article

  • using munin-plugins-rails to monitor rails app perfromance

    - by user2099762
    I have been trying to configure munin-plugins-rails to monitor the performance of our rails apps from Munin. The graphs appear, but no data is shown in the graphs. The log files show Error output from : 2013/06/27-15:39:06 [5540] Request-log-analyzer, by Willem van Bergen and $ 2013/06/27-15:39:06 [5540] Website: http://railsdoctors.com I have tried running Request-log-analyzer manually and pointing it at the production log file, and this reports as % for every item. There is data in the log file. I have tried changing the version of the gems installed, and also the type of the log file, but no luck. Any ideas anyone? Thanks

    Read the article

  • Is there an equivalent of RDP?

    - by detly
    The "Desktop Sharing" settings that come installed by default seem to use VNC. VNC is a bit of a bandwidth hog, can only work at the resolution of whatever screen is attached to the host, and mirrors every action on the host. (It also seems to work poorly with compositing, but maybe that's been fixed.) I know about X tunnelling, but that's annoying to use and doesn't always work properly (or, more accurately, some apps don't work properly). Is there any kind of protocol in between the two, similar to RDP used for Windows? Specifically, something that can run at a different resolution to the host screen and is a little lighter on the network? (Ideally, the more the protocol could have in common with RDP, the better.)

    Read the article

  • ????????! ?????????????????JRockit Flight Recorder????|WebLogic Channel|??????

    - by ???02
    ???????????????????????????????????????WebLogic Server????????·??????????????????????????????????????????????WebLogic Server????????????????????????????????????????????????????????????????????????JRockit Flight Recorder???WebLogic Server????????????????????????????????????????????????????????????????????????????????????????(???)?????????????????――????????JRockit Flight Recorder ???????????·?????????????????????????????????????????????????????????????????????????????????? ????Java?????(JVM:Java Virtual Machine)??????????????????????????????????·??????????????????·?????????????????????????????????·???·????????????????????????????????????????????·?????JVM????????????????????????????????????????????????????????????????????????????????????????????? ???JVM?????????????·??????(Out of Memory Error)????????????????·???????????·??????(GC)?????????????????????????????????????????????????????????JVM?????????GC???????????????????????????????????????????????? ???????????????????2010?7?????????WebLogic Server Enterprise Edition 11g R1 Patch Set 2???????????????????JRockit Flight Recorder????????????????????????????????????????????????????????????????????????????????????????????????????JRockit Flight Recorder????????OS?????????·?????CPU??????????????????????JVM?????????JVM?????????·????????????·??????????????????·????????JVM?CPU????????·?????????·????JIT?????????????????Java????????·???????/???????????????/????????????WebLogic Server????????????EJB?JDBC?Web?????JTA?????????????????????????????? ??WebLogic Server??????????????????????????JRockit Runtime Analyzer??????????Runtime Analyzer?????????????????????????????????????????WebLogic Server?????????????????????????????????JRockit Flight Recorder?????????????????????????????????????????????? JRockit Flight Recorder???????????????????????????????????????????????????????? ???Java EE???????????????????????????????????????????????????JVM????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????JRockit Flight Recorder????JVM(JRockit)?????????????????????????????????????????????????????????????3%?????????????????????????????????????????????????????????????????????????? ????????JRockit Flight Recorder?????????????????????????????????????????????????????????????????????????JRockit Flight Recorder????? JRockit Flight Recorder????????????????????(????????????????????????)??????????????????????????(???????·????)??????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????JRockit Flight Recorder??????????????????????????????????????????·?????????????????????????????????????(?????GUI????Oracle JRockit Mission Control????)????????·??????????????????????????????JRockit Flight Recorder????????????????????? ??????????????????????JRockit Flight Recorder?WebLogic Server Enterprise Edition???????????WebLogic Server?????????????????????????????????????????????????????????????????????????????????????????????????? ??????????JRockit Flight Recorder????????????????????????????????????? ????????JRockit Flight Recorder??????????????????????????????????????????·?????????????????JRockit Mission Control??????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ??????????????1????????????????????????????????????Thread Parked????????????????????????????????????????????Thread Parked????????????????????????????? ???JRockit Flight Recorder?JDBC??????????????????SQL?????????????????????????????????? ??????·???????????????????????????JRockit Flight Recorder?????????1???????????SLA?????? JRockit Flight Recorder????????????????????? ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ????JRockit Flight Recorder???????????????????????????????????SLA(Service Level Agreement)?????????????????????????????????????????????????????????????????????????????????????????? ????????????JRockit Flight Recorder???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????JRockit Flight Recorder????????????1???JRockit Flight Recorder????????????????? ????????JRockit Flight Recorder?????????????????????????????????????????????????? ???JRockit Flight Recorder??????????????????1??????! ?????????????????????????????????3????????????????????????????6??????????????????13???????????????????????????????????????????????????????20???????????????????????35???????????????38?????????????????????????? ???????JRockit Flight Recorder???????????????????????????1??????! ??????????????????JRockit Flight Recorder??????????????????????3???????????????????18???????????????21?????????????????????????? ??????????????JRockit Flight Recorder????????????????????????????????????????JRockit Flight Recorder???????????????????????????????????????????????????JRockit Flight Recorder???????????? ??????????????????·???????????????????????JRockit Flight Recorder???????????????????????????? ???????????????????????????????――??????????????????? ???????????JRockit Flight Recorder??????2????1?????????????????????????????????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????JRockit Flight Recorder???????????????????????????????????????????????????????????????????SIer???????――???????/???????????????? JRockit Flight Recorder????????????????????IT?????????SIer????????????? ??????????????????????????SIer?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????(???????)?????????????????????????????????????????????????????????????????????????? ???JRockit Flight Recorder??????????????????????????????????????????????????????????????????????????????????????????/????????????????????????????????????????*   *   * ???????WebLogic Server Enterprise Edition???????????????????JRockit Flight Recorder????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????WebLogic Server?????????????JVM Oracle JRockit??? ???? ···???JVM?Oracle JRockit??????????????????????????JRockit Flight Recorder????????????????? ?????45???????????????????????????????????? ?WMV?? ?MP4??

    Read the article

  • Need a little help with sound in a JApplet

    - by jacob schuschel
    I am working on a solitaire game in Java, and i need to implement sound when the desk is shuffled, card flipped, etc. I used the following sites as reference to try and get it to work, but i am getting Null Pointer Exceptions or mishandled URL exception (depending on what i tweak). here Also, i am using netbeans 6.7.1 as my IDE. I will try to break down the code and explain: package cardgame; import java.applet.*; import java.util.logging.Level; import java.util.logging.Logger; import javax.swing.JApplet; import javax.swing.*; import java.io.*; import java.net.*; /** * * @author jacob */ public class Sound extends JApplet { private AudioClip song; // Sound player private String URL = null; private URL songPath; // Sound path /* *sound_1 = shuffling cards *sound_2 = to discard *sound_3 = from discard *sound_4 = cardflip 1 *sound_5 = cardflip 2 */ Sound(String filename) { try { songPath = new URL(getCodeBase(),filename); // Get the Sound URL } catch (MalformedURLException ex) { Logger.getLogger(Sound.class.getName()).log(Level.SEVERE, null, ex); } song = getAudioClip(songPath); // Load the Sound } Sound(int i) { URL = "./sounds/sound_" + i + ".wav"; System.out.println(URL); try { songPath = new URL(URL); // Get the Sound URL song = getAudioClip(songPath); } catch (MalformedURLException ex) { Logger.getLogger(Sound.class.getName()).log(Level.SEVERE, null, ex); } } public void playSound() { song.loop(); // Play } public void stopSound() { song.stop(); // Stop } public void playSoundOnce() { song.play(); // Play only once } } The 2 different construcors are for different ways i tried to implement this. The first one creates the filepath, and passes it in. The second one builds the filepath in the constructor, given a sound # (i made a list of what numbers correspond to what sound for reference). I am getting the followig errors out: ./sounds/sound_1.wav Nov 16, 2009 4:14:13 PM cardgame.Sound ./sounds/sound_2.wav SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_1.wav ./sounds/sound_3.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) ./sounds/sound_4.wav ./sounds/sound_5.wav at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_2.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_3.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_4.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Nov 16, 2009 4:14:13 PM cardgame.Sound SEVERE: null java.net.MalformedURLException: no protocol: ./sounds/sound_5.wav at java.net.URL.(URL.java:583) at java.net.URL.(URL.java:480) at java.net.URL.(URL.java:429) at cardgame.Sound.(Sound.java:46) at cardgame.Game.loadSounds(Game.java:712) at cardgame.Game.(Game.java:62) at cardgame.Main.main(Main.java:25) Thanks for those who read and more thanks to those who help. I know it is somewhat long, but i would rather get it all out there, than have 50 questions that come back or have people not answer due to lack of initial info. also only lets me post a single link right now, so the links are given below dreamincode.net/forums/showtopic14083.htm stackoverflow.com/questions/512436/java-playing-wav-sounds deitel.com/articles/java_tutorials/20060422/LoadingPlayingAudioClips/index.html

    Read the article

  • How to generate a Program template by generating an abstract class

    - by Byron-Lim Timothy Steffan
    i have the following problem. The 1st step is to implement a program, which follows a specific protocol on startup. Therefore, functions as onInit, onConfigRequest, etc. will be necessary. (These are triggered e.g. by incoming message on a TCP Port) My goal is to generate a class for example abstract one, which has abstract functions as onInit(), etc. A programmer should just inherit from this base class and should merely override these abstract functions of the base class. The rest as of the protocol e.g. should be simply handled in the background (using the code of the base class) and should not need to appear in the programmers code. What is the correct design strategy for such tasks? and how do I deal with, that the static main method is not inheritable? What are the key-tags for this problem? (I have problem searching for a solution since I lack clear statements on this problem) Goal is to create some sort of library/class, which - included in ones code - results in executables following the protocol. EDIT (new explanation): Okay let me try to explain more detailled: In this case programs should be clients within a client server architecture. We have a client server connection via TCP/IP. Each program needs to follow a specific protocol upon program start: As soon as my program starts and gets connected to the server it will receive an Init Message (TcpClient), when this happens it should trigger the function onInit(). (Should this be implemented by an event system?) After onInit() a acknowledgement message should be sent to the server. Afterwards there are some other steps as e.g. a config message from the server which triggers an onConfig and so on. Let's concentrate on the onInit function. The idea is, that onInit (and onConfig and so on) should be the only functions the programmer should edit while the overall protocol messaging is hidden for him. Therefore, I thought using an abstract class with the abstract methods onInit(), onConfig() in it should be the right thing. The static Main class I would like to hide, since within it e.g. there will be some part which connects to the tcp port, which reacts on the Init Message and which will call the onInit function. 2 problems here: 1. the static main class cant be inherited, isn it? 2. I cannot call abstract functions from the main class in the abstract master class. Let me give an Pseudo-example for my ideas: public abstract class MasterClass { static void Main(string[] args){ 1. open TCP connection 2. waiting for Init Message from server 3. onInit(); 4. Send Acknowledgement, that Init Routine has ended successfully 5. waiting for Config message from server 6..... } public abstract void onInit(); public abstract void onConfig(); } I hope you get the idea now! The programmer should afterwards inherit from this masterclass and merely need to edit the functions onInit and so on. Is this way possible? How? What else do you recommend for solving this? EDIT: The strategy ideo provided below is a good one! Check out my comment on that.

    Read the article

  • ssh_exchange_identification: Connection closed by remote host

    - by Charlie Epps
    First: $ ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa $ cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys Connecting to SSH servers gives this message: $ ssh -vvv localhost OpenSSH_5.3p1, OpenSSL 0.9.8m 25 Feb 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/charlie/.ssh/identity type -1 debug1: identity file /home/charlie/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/charlie/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/charlie/.ssh/id_dsa type 2 ssh_exchange_identification: Connection closed by remote host My /etc/hosts.allow is as following: sshd: ALLOW /etc/hosts.deny is as following: ALL: ALL: DENY I have changed my /etc/ssh/sshd_conf as following: ListenAddress 0.0.0.0 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys PasswordAuthentication no

    Read the article

  • Error 720 on VPN (PPTP) attempt

    - by Andy Shulman
    When I attempt to connect to a server running XP x64 (so essentially Server 2003) using a PPTP connection, it fails with client-side error Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this configuration. and server-side error Event ID: 20050 The user WINSERV3\Andy connected to port VPN8-1 has been disconnected because no network protocols were successfully negotiated. I have configured the router to pass both TCP packets on 1723 and GRE packets. I have used Wireshark (filtering out ARP, UDP, and all TCP ports other than 1723) to observe the packets received by the server. Wireshark does not explicitly name any protocol GRE, but it does tell me the server sent and received TCP, PPTP, PPP LCP, PPP CHAP, PPP CBCP, and PPP IPCP. The connection seems to go wrong at packet 30, where the protocol is PPP LCP, with the payload of the packet being labeled "Protocol Reject". Obviously, this is going from server to client. This would seem to lead to the conclusion that there is something wrong with my client, which runs Windows 7 Ultimate x64. However, it is able to connect to my house's router, which runs the DD-WRT firmware and is thus a PPTP endpoint. I'm thoroughly at a loss. Please help!

    Read the article

  • ssh keys rejected each day

    - by EddyR
    I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

    Read the article

  • Internet slowed down because of SQUID Server setup

    - by Ranjith Kumar
    Recently I have setup a squid server for our office. I have computer (A) with two ethernet cards, one for internet and the second one for local networkIt has Ubuntu server OS with squid-server and dhcp3-server installedI have added few iptable rules to work like a router and redirect all http traffic to 3128 port This link is my reference. Everything worked fine for 2 days. All of a sudden internet speed went down drastically. When I connected the internet cable to my laptop to test the internet speed it was fine. Again when I reconnected it back to computer A everything was normal. This happened 4 times in a week. Could anyone here please help me why the internet speed is going down and it becomes normal when I reconnect the cable. EDIT: Rebooting the system (computer A) didn't make a difference. I have changed iptables so that http traffic doesn't redirect to 3128 port any further, still no change in the internet speed. I think the problem is not with squid but with something else. Here are my iptable rules SQUID_SERVER="10.1.1.1" INTERNET="eth1" LAN_IN="eth0" SQUID_PORT="3128" PROXYSERVERS=(Atlanta Baltimore Boston Chicago Dallas Denver Houston KansasCity LosAngeles Miami NewYork Philadelphia Phoenix SanAntonio SanDiego SanJose Seattle Washington) SERVERLEN=${#PROXYSERVERS[*]} I=0 iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X modprobe ip_conntrack modprobe ip_conntrack_ftp echo 1 /proc/sys/net/ipv4/ip_forward iptables -P INPUT DROP iptables -P OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT while [ $I -lt $SERVERLEN ]; do iptables -t nat -A PREROUTING -i $LAN_IN -p tcp -d ${PROXYSERVERS[$I]}.wonderproxy.com --dport 80 -j ACCEPT let I++ done iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT iptables -A INPUT --protocol tcp --dport 80 -j ACCEPT iptables -A INPUT --protocol tcp --dport 443 -j ACCEPT iptables -A INPUT --protocol tcp --dport 22 -j ACCEPT iptables -A INPUT -j LOG iptables -A INPUT -j DROP

    Read the article

  • HTB.init / tc behind NAT

    - by Ben K.
    I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

    Read the article

  • What is the point of PPPoE?

    - by aaa90210
    I am trying to expand my knowledge of networking beyond the basics. I have started reading about PPP, and how it is used in DSL modems with PPPoE and PPPoA. My first impression of PPP was "well that seems pretty similar to Ethernet". They are both data link layer protocols. They both have fields to identify the encapsulated protocol (e.g. IP). They both have related protocols to assign IP addresses (DHCP and NCP). So my first question was "so what's the point of PPP, why not just use Ethernet?". The answer to that was fairly straightforward - Ethernet is not supported over a wide range of media like serial lines, and is a fairly specific technology to LAN's using CAT5 or similar. HOWEVER - then I was reading about PPPoE, and the obvious thought was "well if we are doing something over Ethernet, then Ethernet must be available and in use, so why not just use it?". In other words, PPPoE seems to be encapsulating one data-link layer protocol in another very similar protocol. Why do IP-inside-PPP-inside-Ethernet when we could just be doing IP-inside-Ethernet, and use DHCP rather than NCP to assign the IP address to the home router? Thanks

    Read the article

  • VPN issue: SSTP Service service started and then stopped

    - by Ampersand
    When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

    Read the article

  • How do I specify the emergency location in CDP?

    - by chrish
    In the LLDP-MED and Cisco Discovery Protocol whitepaper, it compares LLDP-MED and CDP. The part I am interested in is emergency location configuration. In LLDP-MED, I can specify the Emergency Line Indentification Number (ELIN) and that number will be used by some IP Phones (e.g. Aastra) when placing emergency calls. The whitepaper states: Location Identification Discovery This capability is important because it normally provides location information from the switch to the phone. (If the phone is configured with location information or can determine its location, then it may send this information to the switch. However, the real value is getting this information from the switch to the phone for phones that cannot determine their own location.) Location identification discovery allows the phone to be aware of its location-information that can be used for location-based applications on the phone. More importantly, this capability can be used to provide location information when making emergency calls. Both Cisco Discovery Protocol and LLDP-MED support the transportation of location information. However, LLDP-MED has more supported data formats than Cisco Discovery Protocol. I have found the documentation on how to set the location and associate the location to the interfaces for LLDP-MED. How is this done for CDP? Is ELIN supported for CDP?

    Read the article

  • CentOS tftp server is broken

    - by Mike Pennington
    I'm trying to run tftpd from xinetd on CentOS 6; however, I can only tftp from localhost. I have a file in /opt/tftpboot/fw.test.conf that I can retrieve if I tftp to localhost: [mpenning@localhost ~]$ tftp localhost tftp> get fw.test.conf tftp> quit [mpenning@localhost ~]$ ls fw.test.conf [mpenning@localhost ~]$ However, I cannot receive this file if I tftp to eth1 on this server (the address on eth1 is 172.16.1.4). [mpenning@localhost ~]$ sudo tshark -i eth1 udp and host 172.16.1.5 Running as user "root" and group "root". This could be dangerous. Capturing on eth1 0.000000 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 5.000133 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 10.000184 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 15.000297 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 20.000331 172.16.1.5 -> 172.16.1.4 TFTP Read Request, File: fw.test.conf\000, Transfer type: netascii\000 ^C5 packets captured [mpenning@localhost ~]$ I have the following xinetd configuration: [root@localhost mpenning]# cat /etc/xinetd.d/tftp # default: off # description: The tftp server serves files using the trivial file transfer \ # protocol. The tftp protocol is often used to boot diskless \ # workstations, download configuration files to network-aware printers, \ # and to start the installation process for some operating systems. service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -s /opt/tftpboot disable = no per_source = 11 cps = 100 2 flags = IPv4 } [root@localhost mpenning]#

    Read the article

  • PHP include() through HTTP makes Apache time out

    - by Adam Interact
    I have a problem with ExpressionEngine2 after moving from an old server to WHM/cPanel running on CentOS6.4. Simple test code to reproduce that issue: <?php $protocol = strpos(strtolower($_SERVER['SERVER_PROTOCOL']),'https') === FALSE ? 'http' : 'https'; $host = $_SERVER['HTTP_HOST']; include($protocol . '://' . $host . '/header.html'); ?> <p> Main text...</p> <?php include($protocol . '://' . $host . '/footer.html'); ?> Where header.html looks like <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> and footer.html looks like: </body> </html> Creates Apache time out: Warning: include(http://www.domain.com/header.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 5 Warning: include() [function.include]: Failed opening 'http://www.domain.com/header.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 5 Main text... Warning: include(http://www.domain.com/footer.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 12 Warning: include() [function.include]: Failed opening 'http://www.domain.com/footer.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 12 Any clue what can be wrong with Apache or PHP configuration? Thanks

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >