protocol analyzer - Page 26

Low disk space: home/user folder occupies 94GB

- by tedtoy

I am low on disk space and when I check the Disk Usage analyzer (using gksudo baobab) it indicates that my home/teddy folder is using 94GB, but when I browse through its contents I can only account for about 1gb of that usage. I've tried sudo apt-get clean and deleting the cached package files from Synaptic Package Manager, emptied trash but that has not changed the amount of free space I have. It seems similar to this problem But using the root disk usage analyzer has not given any insight into what is consuming so much space. Any ideas?

Read the article

SSH error: Permission denied, please try again

- by Kamal

I am new to ubuntu. Hence please forgive me if the question is too simple. I have a ubuntu server setup using amazon ec2 instance. I need to connect my desktop (which is also a ubuntu machine) to the ubuntu server using SSH. I have installed open-ssh in ubuntu server. I need all systems of my network to connect the ubuntu server using SSH (no need to connect through pem or pub keys). Hence opened SSH port 22 for my static IP in security groups (AWS). My SSHD-CONFIG file is: # Package generated configuration file # See the sshd_config(5) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key HostKey /etc/ssh/ssh_host_ecdsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords #PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM yes Through webmin (Command shell), I have created a new user named 'senthil' and added this new user to 'sudo' group. sudo adduser -y senthil sudo adduser senthil sudo I tried to login using this new user 'senthil' in 'webmin'. I was able to login successfully. When I tried to connect ubuntu server from my terminal through SSH, ssh senthil@SERVER_IP It asked me to enter password. After the password entry, it displayed: Permission denied, please try again. On some research I realized that, I need to monitor my server's auth log for this. I got the following error in my auth log (/var/log/auth.log) Jul 2 09:38:07 ip-192-xx-xx-xxx sshd[3037]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=MY_CLIENT_IP user=senthil Jul 2 09:38:09 ip-192-xx-xx-xxx sshd[3037]: Failed password for senthil from MY_CLIENT_IP port 39116 ssh2 When I tried to debug using: ssh -v senthil@SERVER_IP OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to SERVER_IP [SERVER_IP] port 22. debug1: Connection established. debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file {MY-WORKSPACE}/.ssh/id_rsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_dsa-cert type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa type -1 debug1: identity file {MY-WORKSPACE}/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA {SERVER_HOST_KEY} debug1: Host 'SERVER_IP' is known and matches the ECDSA host key. debug1: Found key in {MY-WORKSPACE}/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: password debug1: Next authentication method: password senthil@SERVER_IP's password: debug1: Authentications that can continue: password Permission denied, please try again. senthil@SERVER_IP's password: For password, I have entered the same value which I normally use for 'ubuntu' user. Can anyone please guide me where the issue is and suggest some solution for this issue?

Read the article

Need a Holistic view of your Concurrent Processing?

- by cwarticki

Need a Holistic view of your Concurrent Processing? Choose CP AnalyzerGo to Doc 1411723.1 for more details and script download. The Concurrent Processing Analyzer is a Self-Service Health-Check script which reviews the overall Concurrent Processing Footprint, analyzes the current configurations and settings for the environment providing feedback and recommendations on Best Practices. This is a non-invasive script which provides recommended actions to be performed on the instance it was run on. For production instances, always apply any changes to a recent clone to ensure an expected outcome. E-Business Applications Concurrent Processing Analyzer Overview E-Business Applications Concurrent Request Analysis E-Business Applications Concurrent Manager Analysis Identifies Concurrent System Setup and configurations Identifies and recommends Concurrent Best Practices Easy to add Tool for regular Concurrent Maintenance Execute Analysis anytime to compare trending from past outputs Feedback welcome!

Read the article

WebLogic JDBC Use of Oracle Wallet for SSL

- by Steve Felts

Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server. Data between WLS and database can be encrypted. The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server. The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates. By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1]. The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL. However, there is a fair amount of setup needed. Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet. The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2]. The file name is “cwallet.sso”. Wallets are created using the orapki tool. They need to be created based on the usage (encryption and/or authentication). This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION. These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol. The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side. This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources. The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server. The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined. In addition to the host and port, the wallet file directory must be specified. By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet. SSL support in the Oracle thin driver is available starting in 10g Release 2.

Read the article

Manic Monday - More OpenWorld Solaris Sessions: Developers, Cloud, Customer Insights, Hardware Optimization

- by Larry Wake

We're overflowing with Monday sessions; literally more than one person can take in. Learn more about what's new in Oracle Solaris Studio, hear about the latest x86 and SPARC hardware optimizations, get some insights on cloud deployment strategies, and find out from your peers what they're doing with Oracle Solaris. If you're an OpenWorld attendee, go to to Schedule Builder to guarantee your space in any session or lab. See yesterday's blog post and the "Focus on Oracle Solaris" guide for even more sessions. Monday, October 1st: 10:45 AM - Maximizing Your SPARC T4 Oracle Solaris Application Performance(CON6382, Marriott Marquis - Golden Gate C3) Hear how customers and commercial software partners have reached peak performance on SPARC T4 servers and engineered systems with Oracle Solaris Studio and its latest tools for analyzing, reporting, and improving runtime performance: Autoparallelizing, high-performance compilers Performance Analyzer (used to find performance hotspots) Thread Analyzer (to expose data races and deadlocks) Code Analyzer (used to discover latent memory corruption issues) 10:45 Cloud Formation: Implementing IaaS in Practice with Oracle Solaris(CON8787, Moscone South 302) Decisions, decisions--at the same time, we've got a session that covers why Oracle Solaris is the ideal OS for public or private clouds, IaaS or PaaS, with built-in features for elastic infrastructure, unrivaled security, superfast installation and deployment, nonstop availability, and crystal-clear observability. This session will include a customer study on how Oracle Solaris is used in the cloud today to implement the Oracle stack. 12:15 PM - Customer Insight: Oracle Solaris on Oracle Exadata, Oracle Exalogic, and SPARC SuperCluster(CON8760, Moscone South 270) Hear from customers what benefits they have realized from using the Oracle stack on Oracle Exadata and Oracle’s SPARC SuperCluster and from using Oracle Solaris on those engineered systems, taking advantage of built-in lightweight OS virtualization (Zones), enterprise reliability and scale, and other key features. 1:45 PM - Case Study: Mobile Tornado Uses Oracle Technology for Better RAS and TCO?(CON4281, Moscone West 2005) Mobile Tornado develops and markets instant communication platforms, replacing traditional radio networks with cellular networks. Its critical concern is uptime. Find out how they've used Oracle Solaris, Netra SPARC T4, and Oracle Solaris Cluster, including Oracle Solaris ZFS and Zones, for their Oracle Database deployments to improve reliability and drive down cost. 3:15 PM - Technical Panel: Developing High Performance Applications on Oracle Solaris(CON7196, Marriott Marquis - Golden Gate C2) Engineers from the Oracle Solaris, Oracle Database, and Oracle Tuxedo development teams, and Oracle ISV Engineering discuss how they develop high-performance enterprise applications that take advantage of Oracle's SPARC and x86 servers, with Oracle Solaris Studio and new Oracle Solaris 11 features. Topics will include developer tools, parallel frameworks, best practices, and methodologies, as well as insights and case studies on parallelizing and optimizing application performance on Oracle Solaris. Bring your best questions! 3:15 PM - x86 Power Management with Oracle Solaris: Current State, Opportunities, and Future(CON6271, Moscone West 2012) Another option for this time slot: learn about how Intel Xeon and Oracle Solaris work together to reduce server power consumption. This presentation addresses some of the recent power management improvements in Oracle Solaris, opportunities to further improve energy efficiency, and some future directions for Oracle Solaris power management.

Read the article

HTML Tidy in NetBeans IDE

- by Geertjan

First step in integrating HTML Tidy (via its JTidy implementation) into NetBeans IDE: The reason why I started doing this is because I want to integrate this into the pluggable analyzer functionality of NetBeans IDE that I recently blogged about, i.e., where the FindBugs functionality is found. So a logical first step is to get it working in an Action class, after which I can port it into the analyzer infrastructure: import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.io.IOException; import java.io.PrintWriter; import java.io.StringWriter; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionReferences; import org.openide.awt.ActionRegistration; import org.openide.cookies.EditorCookie; import org.openide.cookies.LineCookie; import org.openide.loaders.DataObject; import org.openide.text.Line; import org.openide.text.Line.ShowOpenType; import org.openide.util.Exceptions; import org.openide.util.NbBundle.Messages; import org.openide.windows.IOProvider; import org.openide.windows.InputOutput; import org.openide.windows.OutputEvent; import org.openide.windows.OutputListener; import org.openide.windows.OutputWriter; import org.w3c.tidy.Tidy; @ActionID( category = "Tools", id = "org.jtidy.TidyAction") @ActionRegistration( displayName = "#CTL_TidyAction") @ActionReferences({ @ActionReference(path = "Loaders/text/html/Actions", position = 150), @ActionReference(path = "Editors/text/html/Popup", position = 750) }) @Messages("CTL_TidyAction=Run HTML Tidy") public final class TidyAction implements ActionListener { private final DataObject context; private final OutputWriter writer; private EditorCookie ec = null; public TidyAction(DataObject context) { this.context = context; ec = context.getLookup().lookup(org.openide.cookies.EditorCookie.class); InputOutput io = IOProvider.getDefault().getIO("HTML Tidy", false); io.select(); writer = io.getOut(); } @Override public void actionPerformed(ActionEvent ev) { Tidy tidy = new Tidy(); try { writer.reset(); StringWriter stringWriter = new StringWriter(); PrintWriter errorWriter = new PrintWriter(stringWriter); tidy.setErrout(errorWriter); tidy.parse(context.getPrimaryFile().getInputStream(), System.out); String[] split = stringWriter.toString().split("\n"); for (final String string : split) { final int end = string.indexOf(" c"); if (string.startsWith("line")) { writer.println(string, new OutputListener() { @Override public void outputLineAction(OutputEvent oe) { LineCookie lc = context.getLookup().lookup(LineCookie.class); int lineNumber = Integer.parseInt(string.substring(0, end).replace("line ", "")); Line line = lc.getLineSet().getOriginal(lineNumber - 1); line.show(ShowOpenType.OPEN, Line.ShowVisibilityType.FOCUS); } @Override public void outputLineSelected(OutputEvent oe) {} @Override public void outputLineCleared(OutputEvent oe) {} }); } } } catch (IOException ex) { Exceptions.printStackTrace(ex); } } } The string parsing above is ugly but gets the job done for now. A problem integrating this into the pluggable analyzer functionality is the limitation of its scope. The analyzer lets you select one or more projects, or individual files, but not a folder. So it doesn't work on folders in the Favorites window, for example, which is where I'd like to apply HTML Tidy, across multiple folders via the analyzer functionality. That's a bit of a bummer that I'm hoping to get around somehow.

Read the article

Cannot SSH after resetting firewall on VPS

- by Thomas Buckley

I'm having trouble trying to SSH to my Debian 5 VPS with blacknight. It was working fine until I did the following: Logged into 'Parallels Infrastructure Manager' - Container - Firewall - Set to 'Normal Firewall settings'. It told me there was an error with the IPTables and offered the option again with a checkbox to 'reset' firewall settings, I selected this. I can see that that the default rules are been applied ( anything from anyone on any port and allowing anything to happen). Whenever I attempt to SSH I get the following debug info: thomas@localmachine:~/.ssh$ ssh -v thomas@hostname OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname [***********] port 22. debug1: Connection established. debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA ************************************* debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). I had my public/private RSA keys set up and working fine before I reset the firewall settings. I had also made the following changes to my /etc/ssh/sshd_config file on the VPS: PermitRootLogin no PasswordAuthentication no X11Forwarding no UsePAM no UseDNS no AllowUsers thomas Could it be something to do with the SSH server & client having different versions between my local machine and VPS? Any help appreciated. Output with ssh -vvv thomas@localcomputer:~/.ssh$ ssh -vvv thomas@**************** OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ************ [*************] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/home/thomas/.ssh/id_rsa" as a RSA1 public key debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/thomas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-4096 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-4096 debug1: identity file /home/thomas/.ssh/id_rsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_dsa type -1 debug1: identity file /home/thomas/.ssh/id_dsa-cert type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa type -1 debug1: identity file /home/thomas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-7ubuntu1 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "*****************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 127/256 debug2: bits set: 498/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA *********************************************************** debug3: load_hostkeys: loading entries for host "*********************" from file "/home/thomas/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /home/thomas/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '****************' is known and matches the RSA host key. debug1: Found key in /home/thomas/.ssh/known_hosts:1 debug2: bits set: 516/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/thomas/.ssh/id_rsa (0x7fa7028b6010) debug2: key: /home/thomas/.ssh/id_dsa ((nil)) debug2: key: /home/thomas/.ssh/id_ecdsa ((nil)) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/thomas/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey debug1: Trying private key: /home/thomas/.ssh/id_dsa debug3: no such identity: /home/thomas/.ssh/id_dsa debug1: Trying private key: /home/thomas/.ssh/id_ecdsa debug3: no such identity: /home/thomas/.ssh/id_ecdsa debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey). sshd_config # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) C hallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no UseDNS no AllowUsers thomas Thanks

Read the article

how to use winpcap to send EAPOL packets on windows 7 with wireless card?

- by caimengru0807

I want to implement a 802.1X wireless client on Windows 7 using PEAP/MSCHAPv2. The 802.1X protocol is a data link layer protocol, it uses the EAPOL protocol to encapsulate the packets. I use the WinPcap to send and receive the EAPOL packets, however I fail to do it with the wireless NIC. It can work fine to send the EAPOL packets use wired NIC. It can also work fine to send the EAPOL packets on Windows XP using wireless NIC. So what's wrong with it on Windows 7?

Read the article

Wireless Activity Monitoring for PCI DSS Compliance

- by dkusleika

In an effort to be PCI DSS compliant, I took a trustkeeper.net questionnaire. I failed the question that asks Is the presence of wireless access points tested for by using a wireless analyzer at least quarterly or by deploying a wireless IDS/IPS to identify all wireless devices in use? (SAQ #11.1) My only wireless access point is outside my firewall, so even if you cracked my wireless you couldn't get inside my domain (unless you crack that too). My firewall doesn't have IPS and I couldn't tell if it had IDS. I looked around for a wireless analyzer, but what I found was $500, which is a little pricey for my size business. And even if I got it, I'm not sure I would understand what it tells me. Surely there are smaller/less sophisticated businesses that take credit cards and have solved this. My questions are: What are the risks if someone were to crack my wireless? (Could they read all internet traffic? Just wireless traffic? Just use my internet connection?) And what is the best/cheapest way to test my connection point quarterly? Should I buy the $500 analyzer? Domain is Windows Server 2000. Firewall is Sonicwall Pro 2040. Router is 8 port D-link.

Read the article

FTP v/s SFTP v/s FTPS

- by susmits

We're setting up a web server at our workspace. In conjunction, we're planning to install an FTP server, however I'm stuck at what protocol to employ -- FTP, SFTP or FTPS. I googled around, trying to see what protocol offers what, coming across articles like this, but I can't make up my mind. Only simple, once-in-a-while file transfer is desired; however, security is a concern since the file server is intended to be accessible from the internet. What protocol is the most apt for my use, and why?

Read the article

apache tomcat loadbalancing clustering on ubuntu

- by user740010

i am facing a problem in clustering the tomcat with apache as a loadbalancer using mod_jk on ubuntu. i have install apache2 on my ubuntu 11.04 and i have downloaded tomcat7 created two copies and kept them at two different location. 1st one is at /home/net4u/vishal/test/tomcatA 2nd one is at /home/net4u/vishal/test1/tomcatB i have made following changes to server.xml file in /conf folder 1. <Server port="8205" shutdown="SHUTDOWN"> 2. <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> 3.<Connector port="8209" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> 4. <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> similarly i have modified other tomcat i.e tomcatA server.xml content of the server.xml is as follow: --    <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" />      <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB">   <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>  <Realm className="org.apache.catalina.realm.LockOutRealm">  <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true">    <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t "%r" %s %b" resolveHosts="false"/> </Host> </Engine> i have install libapache2-mod-jk step 1. i have Created jk.load file in /etc/apache2/mods-enabled/jk.load content is as follows: LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Create /etc/apache2/mods-enabled/jk.conf: JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/jk.log JkMount /ecommerce/* worker1 JkMount /images/* worker1 JkMount /content/* worker1 step 2. Created workers.properties file in /etc/apache2/workers.properties content is as follows: workers.tomcat_home=/home/vishal/Desktop/test/tomcatA workers.java_home=/usr/lib/jvm/default-java ps=/ worker.list=tomcatA,tomcatB,loadbalancer worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1 worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB worker.loadbalancer.sticky_session=1 i tried the same thing on the windows machine it is working.

Read the article

Cannot start `Routing and Remote Access Service` and it's dependencies

- by ahmadali shafiee

I tried to start Routing and Remote Access Service but I've got an error says the dependency service or group failed to start then I tried to start Remote Access Connection Manager (one of RRAS's dependencies) and the error way same. then I tried to start The Secure Socket Tuning Protocol Service but there was an error says that the the service started then stopped! the errors form event log is here: The Remote Access Connection Manager service depends on the Secure Socket Tunneling Protocol Service service which failed to start because of the following error: The operation completed successfully. The Secure Socket Tunneling Protocol Service service entered the stopped state. The Routing and Remote Access service depends on the Remote Access Connection Manager service which failed to start because of the following error: The dependency service or group failed to start. sort by date Does anyone know how can I resolve the problem?

Read the article

Dovecot not working pop3 with postfix

- by samer na

$ telnet localhost pop3 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused $ netstat -l tcp 0 0 *:www : LISTEN tcp 0 0 localhost.localdoma:ipp : LISTEN tcp 0 0 *:smtp : LISTEN tcp 0 0 localhost.localdo:mysql : LISTEN and nothing about dovecot in mail.log or mail.err when I run this service dovecot start I got start: Rejected send message, 1 matched rules; type="method_call", sender=":1.553" (uid=1000 pid=26250 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) in dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/spool/mail/%d/%n mail_access_groups = mail first_valid_uid = 106 first_valid_gid = 106 protocol imap { } protocol pop3 { listen=*:110 pop3_uidl_format = %08Xu%08Xv } protocol lda { postmaster_address = [email protected] mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } auth default { mechanisms = digest-md5 plain passdb sql { args = /etc/dovecot/dovecot-mysql.conf } userdb sql { args = /etc/dovecot/dovecot-mysql.conf } user = root }

Read the article

How to Avoid Your Next 12-Month Science Project

- by constant

While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack. After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades? On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea. Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company. Engineering Systems is Hard Work! The backbone of Exalogic is its InfiniBand network: 4 times better bandwidth than even 10 Gigabit Ethernet, and only about a tenth of its latency. What a potential for increased scalability and throughput across the middleware and database layers! But InfiniBand is a beast that needs to be tamed: It is true that Exalogic uses a standard, open-source Open Fabrics Enterprise Distribution (OFED) InfiniBand driver stack. Unfortunately, this software has been developed by the HPC community with fastest speed in mind (which is good) but, despite the name, not many other enterprise-class requirements are included (which is less good). Here are some of the improvements that Oracle's InfiniBand development team had to add to the OFED stack to make it enterprise-ready, simply because typical HPC users didn't have the need to implement them: More than 100 bug fixes in the pieces that were not related to the Message Passing Interface Protocol (MPI), which is the protocol that HPC users use most of the time, but which is less useful in the enterprise. Performance optimizations and tuning across the whole IB stack: From Switches, Host Channel Adapters (HCAs) and drivers to low-level protocols, middleware and applications. Yes, even the standard HPC IB stack could be improved in terms of performance. Ethernet over IB (EoIB): Exalogic uses InfiniBand internally to reach high performance, but it needs to play nicely with datacenters around it. That's why Oracle added Ethernet over InfiniBand technology to it that allows for creating many virtual 10GBE adapters inside Exalogic's nodes that are aggregated and connected to Exalogic's IB gateway switches. While this is an open standard, it's up to the vendor to implement it. In this case, Oracle integrated the EoIB stack with Oracle's own IB to 10GBE gateway switches, and made it fully virtualized from the beginning. This means that Exalogic customers can completely rewire their server infrastructure inside the rack without having to physically pull or plug a single cable - a must-have for every cloud deployment. Anybody who wants to match this level of integration would need to add an InfiniBand switch development team to their project. Or just buy Oracle's gateway switches, which are conveniently shipped with a whole server infrastructure attached! IPv6 support for InfiniBand's Sockets Direct Protocol (SDP), Reliable Datagram Sockets (RDS), TCP/IP over IB (IPoIB) and EoIB protocols. Because no IPv6 = not very enterprise-class. HA capability for SDP. High Availability is not a big requirement for HPC, but for enterprise-class application servers it is. Every node in Exalogic's InfiniBand network is connected twice for redundancy. If any cable or port or HCA fails, there's always a replacement link ready to take over. This requires extra magic at the protocol level to work. So in addition to Weblogic's failover capabilities, Oracle implemented IB automatic path migration at the SDP level to avoid unnecessary failover operations at the middleware level. Security, for example spoof-protection. Another feature that is less important for traditional users of InfiniBand, but very important for enterprise customers. InfiniBand Partitioning and Quality-of-Service (QoS): One of the first questions we get from customers about Exalogic is: “How can we implement multi-tenancy?” The answer is to partition your IB network, which effectively creates many networks that work independently and that are protected at the lowest networking layer possible. In addition to that, QoS allows administrators to prioritize traffic flow in multi-tenancy environments so they can keep their service levels where it matters most. Resilient IB Fabric Management: InfiniBand is a self-managing network, so a lot of the magic lies in coming up with the right topology and in teaching the subnet manager how to properly discover and manage the network. Oracle's Infiniband switches come with pre-integrated, highly available fabric management with seamless integration into Oracle Enterprise Manager Ops Center. In short: Oracle elevated the OFED InfiniBand stack into an enterprise-class networking infrastructure. Many years and multiple teams of manpower went into the above improvements - this is something you can only get from Oracle, because no other InfiniBand vendor can give you these features across the whole stack! Exabus: Because it's not About the Size of Your Network, it's How You Use it! So let's assume that you somehow were able to get your hands on an enterprise-class IB driver stack. Or maybe you don't care and are just happy with the standard OFED one? Anyway, the next step is to actually leverage that InfiniBand performance. Here are the choices: Use traditional TCP/IP on top of the InfiniBand stack, Develop your own integration between your middleware and the lower-level (but faster) InfiniBand protocols. While more bandwidth is always a good thing, it's actually the low latency that enables superior performance for your applications when running on any networking infrastructure: The lower the latency, the faster the response travels through the network and the more transactions you can close per second. The reason why InfiniBand is such a low latency technology is that it gets rid of most if not all of your traditional networking protocol stack: Data is literally beamed from one region of RAM in one server into another region of RAM in another server with no kernel/drivers/UDP/TCP or other networking stack overhead involved! Which makes option 1 a no-go: Adding TCP/IP on top of InfiniBand is like adding training wheels to your racing bike. It may be ok in the beginning and for development, but it's not quite the performance IB was meant to deliver. Which only leaves option 2: Integrating your middleware with fast, low-level InfiniBand protocols. And this is what Exalogic's "Exabus" technology is all about. Here are a few Exabus features that help applications leverage the performance of InfiniBand in Exalogic: RDMA and SDP integration at the JDBC driver level (SDP), for Oracle Weblogic (SDP), Oracle Coherence (RDMA), Oracle Tuxedo (RDMA) and the new Oracle Traffic Director (RDMA) on Exalogic. Using these protocols, middleware can communicate a lot faster with each other and the Oracle database than by using standard networking protocols, Seamless Integration of Ethernet over InfiniBand from Exalogic's Gateway switches into the OS, Oracle Weblogic optimizations for handling massive amounts of parallel transactions. Because if you have an 8-lane Autobahn, you also need to improve your ramps so you can feed it with many cars in parallel. Integration of Weblogic with Oracle Exadata for faster performance, optimized session management and failover. As you see, “Exabus” is Oracle's word for describing all the InfiniBand enhancements Oracle put into Exalogic: OFED stack enhancements, protocols for faster IB access, and InfiniBand support and optimizations at the virtualization and middleware level. All working together to deliver the full potential of InfiniBand performance. Who else has 100% control over their middleware so they can develop their own low-level protocol integration with InfiniBand? Even if you take an open source approach, you're looking at years of development work to create, test and support a whole new networking technology in your middleware! The Extras: Less Hassle, More Productivity, Faster Time to Market And then there are the other advantages of Engineered Systems that are true for Exalogic the same as they are for every other Engineered System: One simple purchasing process: No headaches due to endless RFPs and no “Will X work with Y?” uncertainties. Everything has been engineered together: All kinds of bugs and problems have been already fixed at the design level that would have only manifested themselves after you have built the system from scratch. Everything is built, tested and integrated at the factory level . Less integration pain for you, faster time to market. Every Exalogic machine world-wide is identical to Oracle's own machines in the lab: Instant replication of any problems you may encounter, faster time to resolution. Simplified patching, management and operations. One throat to choke: Imagine finger-pointing hell for systems that have been put together using several different vendors. Oracle's Engineered Systems have a single phone number that customers can call to get their problems solved. For more business-centric values, read The Business Value of Engineered Systems. Conclusion: Buy Exalogic, or get ready for a 6-12 Month Science Project And here's the reason why it's not easy to "build your own Exalogic": There's a lot of work required to make such a system fly. In fact, anybody who is starting to "just put together a bunch of servers and an InfiniBand network" is really looking at a 6-12 month science project. And the outcome is likely to not be very enterprise-class. And it won't have Exalogic's performance either. Because building an Engineered System is literally rocket science: It takes a lot of time, effort, resources and many iterations of design/test/analyze/fix to build such a system. That's why InfiniBand has been reserved for HPC scientists for such a long time. And only Oracle can bring the power of InfiniBand in an enterprise-class, ready-to use, pre-integrated version to customers, without the develop/integrate/support pain. For more details, check the new Exalogic overview white paper which was updated only recently. P.S.: Thanks to my colleagues Ola, Paul, Don and Andy for helping me put together this article! var flattr_uid = '26528'; var flattr_tle = 'How to Avoid Your Next 12-Month Science Project'; var flattr_dsc = 'While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack.After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades?On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea.Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company.'; var flattr_tag = 'Engineered Systems,Engineered Systems,Infiniband,Integration,latency,Oracle,performance'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2012/04/how-avoid-your-next-12-month-science-project'; var flattr_lng = 'en_GB'

Read the article

Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

- by SQLOS Team

Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services. Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal): Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired. 1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses 3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode 5. Restart SQL Server service for the change to take effect 6. Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name: DemoVM1Port ---------------------------------------------------------------------- Enabled: Yes Direction: In Profiles: Domain,Private,Public Grouping: LocalIP: Any RemoteIP: Any Protocol: TCP LocalPort: 1433 RemotePort: Any Edge traversal: No Action: Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show rule name=DemoVM1Port No rules match the specified criteria. Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1 Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name: DemoVM1Port ---------------------------------------------------------------------- Enabled: Yes Direction: In Profiles: Domain,Private,Public Grouping: LocalIP: Any RemoteIP: Any Protocol: TCP LocalPort: 1433 RemotePort: Any Edge traversal: No Action: Allow Ok. Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show rule name=DemoVM1Port No rules match the specified criteria. Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1 Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines Originally posted at http://blogs.msdn.com/b/sqlosteam/

Read the article

Microsoft Sync Framework

- by kaleidoscope

Introduction It is a platform that enables collaboration and offline access for applications, services and devices. Sync framework features technologies and tools that enable roaming, data sharing and taking data offline. Moreover, developers can build synchronization ecosystems that integrate any application with data from any store, by using any protocol over any network. Highlights * Add sync support to new and existing applications, services and devices * Enable collaboration and offline capabilities for any application * Roam and share information form any data store, over any protocol and over any network configuration * Leverage sync capabilities exposed in Microsoft technologies to create sync ecosystems * Extend the architecture to support custom data types including files Benefits of using Sync Framework * An extensible model that lets you integrate multiple data sources into a synchronization ecosystems. * A managed API for all components and a native API for select components. * Conflict handling for automatic and custom resolution schemes. * Filters that let you synchronize a subset of data, such as only those files that contain images. * A compact and efficient metadata model that enables synchronization for virtually any participant, without significant changes to the data store: - Any data store Add synchronization to a wide range of applications, services and devices. - Any data type Introduce new data types to synchronize. - Any protocol Use existing architectures and protocols to synchronize data. The transport – agnostic architecture allows integration of synchronization into a variety of protocols, including over-the-air and embedded devices. - Any network configuration Enable synchronization for your applications, devices and services in true peer-to-peer or hub-and-spoke configurations. Easily recover from network interruptions. Reduce network traffic by efficiently selecting changes to synchronize. Technorati Tags: Anish Sharma,Microsoft Sync Framework

Read the article

How to protect a peer-to-peer network from inappropriate content?

- by Mike

I’m developing a simple peer-to-peer app in .Net which should enable users to share specific content (text and picture files). As I've learned with my last question, inappropriate content can “relatively” easily be identified / controlled in a centralized environment. But what about a peer-to-peer network, what are the best methods to protect a decentralized system from unwanted (illegal) content? At the moment I only see the following two methods: A protocol (a set of rules) defines what kind of data (e.g. only .txt and jpg-files, not bigger than 20KB etc.) can be shared over the p2p-network and all clients (peers) must implement this protocol. If a peer doesn’t, it gets blocked by other peers. Pro: easy to implement. Con: It’s not possible to define the perfect protocol (I think eMail-Spam filters have the same problem) Some kind of rating/reputation system must be implemented (similar to stackoverflow), so “bad guys” and inappropriate content can be identified / blocked by other users. Pro: Would be very accurate. Con: Would be slow and in my view technically very hard to implement. Are there other/better solutions? Any answer or comment is highly appreciated.

Read the article

At the Java DEMOgrounds - Java EE 7 WebSocket Early Access

- by Janice J. Heiss

At the packed and happening Java DEMOgrounds, I wandered over to check out Java EE Web Profile and Platform Technologies. Martin Matula, a Senior Development Manager at Oracle on the JavaEE/GlassFish team, responsible for the area of web services (including JAX-WS and JAX-RS), was demonstrating Java EE Web Profile and Platform Technologies.Matula was previewing some Java EE 7 WebSocket early access features via a group drawing application that showcases the upcoming JSR 356, “Java API for WebSocket”, which is the API for building RESTful web services and Server-Sent Events, an HTML5 feature. He emphasized that this is supported in Jersey, the reference implementation for JAX-RS, as well.“In this demo,” Matula explained, “I have a simple JavaScript front-end talking to the back-end deployed on GlassFish. It uses RESTful web services to get the list of drawings we have. I can create new drawings and the list is updated immediately using the Server-Sent Events, so the message is coming from the server to the client. Everything is getting updated live using WebSocket, which is the bi-directional communication new protocol in HTML5. This is using Project Jersey and Project Tyrus. Tyrus is the implementation of WebSocket protocol for Java. Jersey implements the RESTful APIs as well as the Server-Sent Events protocol.”

Read the article

trying to use mod_proxy with httpd and tomcat

- by techsjs2012

I been trying to use mod_proxy with httpd and tomcat... I have on VirtualBox running Scientific Linux which has httpd and tomcat 6 on it.. I made two nodes of tomcat6. I followed this guide like 10 times and still cant get the 2nd node of tomcat working.. http://www.richardnichols.net/2010/08/5-minute-guide-clustering-apache-tomcat/ Here is the lines from my http.conf file <Proxy balancer://testcluster stickysession=JSESSIONID> BalancerMember ajp://127.0.0.1:8009 min=10 max=100 route=node1 loadfactor=1 BalancerMember ajp://127.0.0.1:8109 min=10 max=100 route=node2 loadfactor=1 </Proxy> ProxyPass /examples balancer://testcluster/examples <Location /balancer-manager> SetHandler balancer-manager AuthType Basic AuthName "Balancer Manager" AuthUserFile "/etc/httpd/conf/.htpasswd" Require valid-user </Location> Now here is my server.xml from node1 <?xml version='1.0' encoding='utf-8'?>   <Server port="8005" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node1">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> now here is the server.xml file from node2 <?xml version='1.0' encoding='utf-8'?>   <Server port="8105" shutdown="SHUTDOWN">  <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" />  <Listener className="org.apache.catalina.core.JasperListener" />  <Listener className="org.apache.catalina.core.JreMemoryLeakPreventionListener" />  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" /> <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />  <GlobalNamingResources>  <Resource name="UserDatabase" auth="Container" type="org.apache.catalina.UserDatabase" description="User database that can be updated and saved" factory="org.apache.catalina.users.MemoryUserDatabaseFactory" pathname="conf/tomcat-users.xml" /> </GlobalNamingResources>  <Service name="Catalina">         <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" />   <Engine name="Catalina" defaultHost="localhost" jvmRoute="node2">      <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/>  <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">     </Host> </Engine> </Service> </Server> I dont know what it is. but I been trying for days

Read the article

cucumber, capybara & selenium works randomly

- by user247479

Setup with cucumber, capybara and selenium but some scenarios works only randomly. Running ruby 1.8.6 on rvm rails 2.3.8 selenium pops open firefox 3.6 I have tried to add this with no luck: with_scope(selector) do click_button(button) selenium.wait_for_page_to_load end The error output is sometimes: Given I am logged in and have created newsletter and subscribers # features/step_definitions/newsletter_send_steps.rb:108 end of file reached (EOFError) /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/protocol.rb:133:in sysread' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/protocol.rb:133:inrbuf_fill' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/timeout.rb:62:in timeout' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/timeout.rb:93:intimeout' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/protocol.rb:132:in rbuf_fill' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/protocol.rb:116:inreaduntil' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/protocol.rb:126:in readline' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:2020:inread_status_line' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:2009:in read_new' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:1050:inrequest_without_fakeweb' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:1037:in request_without_fakeweb' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:543:instart' /Users/christianhager/.rvm/rubies/ruby-1.8.6-p399/lib/ruby/1.8/net/http.rb:1035:in request_without_fakeweb' ./features/step_definitions/web_steps.rb:24:in__instance_exec2' ./features/step_definitions/web_steps.rb:9:in with_scope' ./features/step_definitions/web_steps.rb:9:inwith_scope' ./features/step_definitions/web_steps.rb:23:in /^(?:|I )press "([^\"]*)"(?: within "([^\"]*)")?$/' features/enhanced/newsletter_send1.feature:7:inGiven I am logged in and have created newsletter and subscribers' And othertimes: no button with value or id or text 'create_user_button' found (Capybara::ElementNotFound) ./features/step_definitions/web_steps.rb:24:in __instance_exec2' ./features/step_definitions/web_steps.rb:9:inwith_scope' ./features/step_definitions/web_steps.rb:9:in with_scope' ./features/step_definitions/web_steps.rb:23:in/^(?:|I )press "([^\"])"(?: within "([^\"])")?$/' features/enhanced/newsletter_send1.feature:7:in `Given I am logged in and have created newsletter and subscribers' And sometimes it just works.... This is how my env.rb looks like ENV["RAILS_ENV"] ||= "cucumber" require File.expand_path(File.dirname(__FILE__) + '/../../config/environment') require 'cucumber/formatter/unicode' # Remove this line if you don't want Cucumber Unicode support require 'cucumber/rails/world' require 'cucumber/rails/active_record' require 'cucumber/web/tableish' require 'capybara/rails' require 'capybara/cucumber' require 'capybara/session' require 'cucumber/rails/capybara_javascript_emulation' require "selenium-webdriver" Capybara.default_driver = :selenium Capybara.default_wait_time = 5 Capybara.ignore_hidden_elements = false Capybara.default_selector = :css ActionController::Base.allow_rescue = false require 'database_cleaner' DatabaseCleaner.strategy = :truncation Before do Capybara.reset_sessions! DatabaseCleaner.clean end Cucumber::Rails::World.use_transactional_fixtures = false Cucumber-steps: Given I am on the signup page And I fill in "user_login" with "[email protected]" within "body" And I fill in "user_password" with "secret" within "body" And I fill in "user_password_confirmation" with "secret" within "body" And I check "terms_of_use" within "body" And I press "create_user_button" within "body" Any insight would be great :)

Read the article

Wildcard searching and highlighting with Solr 1.4

- by andy

Hey guys, I've got a pretty much vanilla install of SOLR 1.4 apart from a few small config and schema changes. <requestHandler name="standard" class="solr.SearchHandler" default="true">  <lst name="defaults"> <str name="defType">dismax</str> <str name="echoParams">explicit</str> <str name="qf"> text </str> <str name="spellcheck.dictionary">default</str> <str name="spellcheck.onlyMorePopular">false</str> <str name="spellcheck.extendedResults">false</str> <str name="spellcheck.count">1</str> </lst> </requestHandler> The main field type I'm using for Indexing is this: <fieldType name="textNoHTML" class="solr.TextField" positionIncrementGap="100"> <analyzer type="index"> <charFilter class="solr.HTMLStripCharFilterFactory" /> <tokenizer class="solr.WhitespaceTokenizerFactory"/> <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" /> <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="1" catenateNumbers="1" catenateAll="0" splitOnCaseChange="1"/> <filter class="solr.LowerCaseFilterFactory"/> <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/> </analyzer> <analyzer type="query"> <tokenizer class="solr.WhitespaceTokenizerFactory"/> <filter class="solr.SynonymFilterFactory" synonyms="synonyms.txt" ignoreCase="true" expand="true"/> <filter class="solr.StopFilterFactory" ignoreCase="true" words="stopwords.txt" enablePositionIncrements="true" /> <filter class="solr.WordDelimiterFilterFactory" generateWordParts="1" generateNumberParts="1" catenateWords="0" catenateNumbers="0" catenateAll="0" splitOnCaseChange="1"/> <filter class="solr.LowerCaseFilterFactory"/> <filter class="solr.SnowballPorterFilterFactory" language="English" protected="protwords.txt"/> </analyzer> </fieldType> now, when I perform a search using "q=search+term&hl=on" I get highlighting, and nice accurate scores. BUT, for wildcard, I'm assuming you need to use "q.alt"? Is that true? If so my query looks like this: "q.alt=search*&hl=on" When I use the above query, highlighting doesn't work, and all the scores are "1.0". What am I doing wrong? is what I want possible without bypassing some of the really cool SOLR optimizations. cheers!

Read the article

Lucene: Wildcards are missing from index

- by Eleasar

Hi - i am building a search index that contains special names - containing ! and ? and & and + and ... I have to tread the following searches different: me & you me + you But whatever i do (did try with queryparser escaping before indexing, escaped it manually, tried different indexers...) - if i check the search index with Luke they do not show up (question marks and @-symbols and the like show up) The logic behind is that i am doing partial searches for a live suggestion (and the fields are not that large) so i split it up into "m" and "me" and "+" and "y" and "yo" and "you" and then index it (that way it is way faster than a wildcard query search (and the index size is not a big problem). So what i would need is to also have this special wildcard characters be inserted into the index. This is my code: using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.Text; using Lucene.Net.Analysis; using Lucene.Net.Util; namespace AnalyzerSpike { public class CustomAnalyzer : Analyzer { public override TokenStream TokenStream(string fieldName, TextReader reader) { return new ASCIIFoldingFilter(new LowerCaseFilter(new CustomCharTokenizer(reader))); } } public class CustomCharTokenizer : CharTokenizer { public CustomCharTokenizer(TextReader input) : base(input) { } public CustomCharTokenizer(AttributeSource source, TextReader input) : base(source, input) { } public CustomCharTokenizer(AttributeFactory factory, TextReader input) : base(factory, input) { } protected override bool IsTokenChar(char c) { return c != ' '; } } } The code to create the index: private void InitIndex(string path, Analyzer analyzer) { var writer = new IndexWriter(path, analyzer, true); //some multiline textbox that contains one item per line: var all = new List<string>(txtAllAvailable.Text.Replace("\r","").Split('\n')); foreach (var item in all) { writer.AddDocument(GetDocument(item)); } writer.Optimize(); writer.Close(); } private static Document GetDocument(string name) { var doc = new Document(); doc.Add(new Field( "name", DeNormalizeName(name), Field.Store.YES, Field.Index.ANALYZED)); doc.Add(new Field( "raw_name", name, Field.Store.YES, Field.Index.NOT_ANALYZED)); return doc; } (Code is with Lucene.net in version 1.9.x (EDIT: sorry - was 2.9.x) but is compatible with Lucene from Java) Thx

Read the article

Can I retain a Google apps session token permanently for a specific user who logs into my google app

- by Ali

Hi guys, is it possible to retain upon authorization a single session token for a user who signs into my gogle application. CUrrently my application seems to every now and then require the user to authenticate into google apps. I think it has to do with session dying out or so. I have the following code: function getCurrentUrl() { global $_SERVER; $php_request_uri = htmlentities(substr($_SERVER['REQUEST_URI'], 0, strcspn($_SERVER['REQUEST_URI'], "\n\r")), ENT_QUOTES); if (isset($_SERVER['HTTPS']) && strtolower($_SERVER['HTTPS']) == 'on') { $protocol = 'https://'; } else { $protocol = 'http://'; } $host = $_SERVER['HTTP_HOST']; if ($_SERVER['SERVER_PORT'] != '' && (($protocol == 'http://' && $_SERVER['SERVER_PORT'] != '80') || ($protocol == 'https://' && $_SERVER['SERVER_PORT'] != '443'))) { $port = ':' . $_SERVER['SERVER_PORT']; } else { $port = ''; } return $protocol . $host . $port . $php_request_uri; } function getAuthSubUrl($n=false) { $next = $n?$n:getCurrentUrl(); $scope = 'http://docs.google.com/feeds/documents https://www.google.com/calendar/feeds/ https://spreadsheets.google.com/feeds/ https://www.google.com/m8/feeds/ https://mail.google.com/mail/feed/atom/'; $secure = false; $session = true; //echo Zend_Gdata_AuthSub::getAuthSubTokenUri($next, $scope, $secure, $session);; return Zend_Gdata_AuthSub::getAuthSubTokenUri($next, $scope, $secure, $session).(isset($_SESSION['domain'])?'&hd='.$_SESSION['domain']:''); } function _regenerate_token() { global $BASE_URL; if(!$_SESSION['token']) { if(isset($_GET['token'])): $_SESSION['token'] = Zend_Gdata_AuthSub::getAuthSubSessionToken($_GET['token']); return; else: _regenerate_sessions(); _redirect(getAuthSubUrl($BASE_URL . '/index.php?'.$_SERVER['QUERY_STRING'])); endif; } } _regenerate_token(); I know I'm doing it all wrong here and I don't know why :( I have a CONSUMER SECRET code but only use it whereever I need to access a google service. However something is wrong with my authentication as the user has to periodically 'grant access to my application' and reauthorise himself... help please

Read the article

Memory management with Objective-C Distributed Objects: my temporary instances live forever!

- by jkp

I'm playing with Objective-C Distributed Objects and I'm having some problems understanding how memory management works under the system. The example given below illustrates my problem: Protocol.h #import <Foundation/Foundation.h> @protocol DOServer - (byref id)createTarget; @end Server.m #import <Foundation/Foundation.h> #import "Protocol.h" @interface DOTarget : NSObject @end @interface DOServer : NSObject < DOServer > @end @implementation DOTarget - (id)init { if ((self = [super init])) { NSLog(@"Target created"); } return self; } - (void)dealloc { NSLog(@"Target destroyed"); [super dealloc]; } @end @implementation DOServer - (byref id)createTarget { return [[[DOTarget alloc] init] autorelease]; } @end int main() { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; DOServer *server = [[DOServer alloc] init]; NSConnection *connection = [[NSConnection new] autorelease]; [connection setRootObject:server]; if ([connection registerName:@"test-server"] == NO) { NSLog(@"Failed to vend server object"); } else [[NSRunLoop currentRunLoop] run]; [pool drain]; return 0; } Client.m #import <Foundation/Foundation.h> #import "Protocol.h" int main() { unsigned i = 0; for (; i < 3; i ++) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; id server = [NSConnection rootProxyForConnectionWithRegisteredName:@"test-server" host:nil]; [server setProtocolForProxy:@protocol(DOServer)]; NSLog(@"Created target: %@", [server createTarget]); [[NSRunLoop currentRunLoop] runUntilDate:[NSDate dateWithTimeIntervalSinceNow:1.0]]; [pool drain]; } return 0; } The issue is that any remote objects created by the root proxy are not released when their proxy counterparts in the client go out of scope. According to the documentation: When an object’s remote proxy is deallocated, a message is sent back to the receiver to notify it that the local object is no longer shared over the connection. I would therefore expect that as each DOTarget goes out of scope (each time around the loop) it's remote counterpart would be dellocated, since there is no other reference to it being held on the remote side of the connection. In reality this does not happen: the temporary objects are only deallocate when the client application quits, or more accurately, when the connection is invalidated. I can force the temporary objects on the remote side to be deallocated by explicitly invalidating the NSConnection object I'm using each time around the loop and creating a new one but somehow this just feels wrong. Is this the correct behaviour from DO? Should all temporary objects live as long as the connection that created them? Are connections therefore to be treated as temporary objects which should be opened and closed with each series of requests against the server? Any insights would be appreciated.

Read the article

Why I get java.net.SocketException: Connection reset

- by Jammy

I need sent some requests to server side and get reponse, sometimes when I call specific method to run the flollowing common code, I get one error in line(addToCookieJar(connection);), any idea how this get happened? URL url = new URL(providerURL); HttpURLConnection connection = (HttpURLConnection)url.openConnection(); connection.setRequestMethod("POST"); connection.setDoInput(true); connection.setDoOutput(true); connection.setUseCaches(false); connection.setRequestProperty("Content-Type", "application/octet-stream"); // We understand gzip encoding connection.addRequestProperty("Accept-Encoding", "gzip"); if (cookie != null && cookieHandler != null) { connection.setRequestProperty("Cookie", cookie); } if (cookieHandler == null) { addFromCookieJar(connection); } // Send the request ObjectOutputStream oos = new ObjectOutputStream(connection.getOutputStream()); oos.writeObject(remote.getName()); oos.writeObject(m.getName()); // method name oos.writeObject(m.getParameterTypes()); // formal parameters oos.writeObject(args); // actual parameters oos.flush(); oos.close(); if (cookieHandler == null) { cookieJar.put(new URI(providerURL), connection.getHeaderFields()); } Exception: java.lang.reflect.UndeclaredThrowableException at $Proxy0.updateDocument(Unknown Source) at com.agst.ui.gantt.GanttPanel.doUpdateDocument(GanttPanel.java:1931) at com.agst.ui.gantt.GanttPanel.save(GanttPanel.java:1419) at com.agst.ui.gantt.GanttPanel$4.run(GanttPanel.java:1673) at java.lang.Thread.run(Unknown Source) Caused by: java.net.SocketException: Connection reset at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at com.agst.rmi.RemoteCallHandler.call(RemoteCallHandler.java:196) at com.agst.rmi.RemoteCallHandler.invoke(RemoteCallHandler.java:142) ... 5 more Caused by: java.net.SocketException: Connection reset at java.net.SocketInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getHeaderFields(Unknown Source) at com.agst.rmi.RemoteCallHandler.addToCookieJar(RemoteCallHandler.java:529) at com.agst.rmi.RemoteCallHandler.call(RemoteCallHandler.java:192) ... 6 more

Search Results

Search found 3710 results on 149 pages for 'protocol analyzer'.

Page 26/149 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33 | Next Page >

- by tedtoy

- by Kamal

- by cwarticki

- by Steve Felts

- by Larry Wake

- by Geertjan

- by Thomas Buckley

- by caimengru0807

- by dkusleika

- by susmits

- by user740010

- by ahmadali shafiee

- by samer na

- by constant

- by SQLOS Team

- by kaleidoscope

- by Mike

- by Janice J. Heiss

- by techsjs2012

- by user247479

- by andy

- by Eleasar

- by Ali

- by jkp

- by Jammy

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33 | Next Page >