Search Results

Search found 10859 results on 435 pages for 'raid controller'.

Page 30/435 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Ubuntu 12.04 crashing

  - by James Mullinix

  We have a server with 2x32gb sas raid 1 and 4x1tb raid 10 + 2x1tb hot spares. Whenever we try to copy the 1tb and 1.5e6 files to a backup location (even just using tty1 cp command) it fails. We have tried using backintime and dejadup, and resorted to a manual cp to an external usb2 HDD. When that failed, we tried installing an internal HDD on the mobo (not on raid) and another cp, which also fails. The failures lock up the system and we are left with an unfortunate hard reboot situation. After reboot, syslog tends to be empty (only containing newly booted data) and we haven't a clue where to start. It has been 3 weeks since our last successful backup and we are getting nervous... -using 3ware raid controller, 8gb ram and nvidia pciexpress graphics with a gigabyte mobo and xeon 4-core processor.

  Read the article

• Codeigniter Controller function in a view [closed]

  - by Y2ok

  I'm using CodeIgniter and I have two controllers: Index controller that loads the website view Personal panel controller that will do all login, registration and personal panel functions. (Functions are loaded from models.) The problem is that I don't have any clue how to insert that controller in a view file or in the other controller file so that it would load when I press submit button for a form or if the session's loggedin is with value true.

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• Ubutnu 12.04 mdadm inactive

  - by user32274

  For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

  Read the article

• Drives will not show up on PCI RAID card in Ubuntu 12.04 LTS

  - by Mechh69

  Computer specs Intel E8200 Dual Core MSI G45M MB Ultra U12-40739 PCI Expansion Card - 2 SATA Internal Ports, 1.5Gbps, RAID 0, 1, JBOD 6 GB DDR2 Q1. I installed Ubuntu 12.04 LTS and Amahi, for using Grey Hole, last night. The two disc on the raid card do not show up under Ubuntu 12.04LTS but they do show up under grey hole so I know the drives and the raid card are working and there. I need to access them in Ubuntu to format them and place folders on them but I can not see them or figure out how to access them. Q2. Only 4 of the six drives connected to the MB are showing in Ubuntu, but they show as active in grey hole. I also need to access these drives in Ubuntu as this is my storage server. I am new to LINUX so any help you can provide with simple directions will be greatly appreciated . Thank you Mechh69

  Read the article

• Ubuntu 12.04 mdadm inactive

  - by user32274

  For a while now, my RAID 5 has ceased to work. Everytime I tried "madm --detail /dev/md127", its states all the drive and drive info, but that two of the drives have been removed. After some restarts, doing the same thing, i am getting /dev/md127 does not appear to be active. When I go into DiskUtil, I can see all 6 Hard Drives healthy and present, and i can see the Raid 5 at the bottom under Multi-disk Devices. However, the Raid says 0.0kb, and is not active. Please help and let me know how to proceed from here. I would really like to avoid rebuilding the RAID, especially because all 6 drives seem to be healthy and present. Thanks so much.

  Read the article

• Testing a scoped find in a Rails controller with RSpec

  - by Joseph DelCioppio

  I've got a controller called SolutionsController whose index action is different depending on the value of params[:user_id]. If its nil, then it simply displays all of the solutions on my site, but if its not nil, then it displays all of the solutions for the given user id. Here it is: def index if(params[:user_id]) @solutions = @user.solutions.find(:all) else @solutions = Solution.find(:all) end end and @user is determined like this: private def load_user if(params[:user_id ]) @user = User.find(params[:user_id]) end end I've got an Rspec test to test the index action if the user is nil: describe "GET index" do context "when user_id is nil" do it "should find all of the solutions" do Solution.should_receive(:find).with(:all).and_return(@solutions) get :index end end end however, can someone tell me how I write a similar test for the other half of my controller, when the user id isn't nil? Something like: describe "GET index" do context "when user_id isn't nil" do before(:each) do @user = Factory.create(:user) @solutions = 7.times{Factory.build(:solution, :user => @user)} @user.stub!(:solutions).and_return(@solutions) end it "should find all of the solutions owned by a user" do @user.should_receive(:solutions).and_return(@solutions) get :index, :user_id => @user.id end end end But that doesn't work. Can someone help me out? Joe

  Read the article

• Testing a scoped find in a Rails controller with RSpec

  - by Joseph DelCioppio

  I've got a controller called SolutionsController whose index action is different depending on the value of params[:user_id]. If its nil, then it simply displays all of the solutions on my site, but if its not nil, then it displays all of the solutions for the given user id. Here it is: def index if(params[:user_id]) @solutions = @user.solutions.find(:all) else @solutions = Solution.find(:all) end end and @user is determined like this: private def load_user if(params[:user_id ]) @user = User.find(params[:user_id]) end end I've got an Rspec test to test the index action if the user is nil: describe "GET index" do context "when user_id is nil" do it "should find all of the solutions" do Solution.should_receive(:find).with(:all).and_return(@solutions) get :index end end end however, can someone tell me how I write a similar test for the other half of my controller, when the user id isn't nil? Something like: describe "GET index" do context "when user_id isn't nil" do before(:each) do @user = Factory.create(:user) @solutions = 7.times{Factory.build(:solution, :user => @user)} @user.stub!(:solutions).and_return(@solutions) end it "should find all of the solutions owned by a user" do @user.should_receive(:solutions).and_return(@solutions) get :index, :user_id => @user.id end end end But that doesn't work. Can someone help me out? Joe

  Read the article

• Navigation Controller Views in Landscape

  - by Mahadevan S

  Hi, I have set up a navigation controller ( navController ) in Portrait mode to which I push all the viewcontrollers I have. Now when a user switches to Landscape mode, I need to display all the views as a coverflow. For this I use [navController viewControllers] to get all the view controllers in the stack. In the Landscape view controller NSArray * arr = [navController viewControllers]; self.view = [arr objectAtIndex:0]; [arr objectAtIndex:0]; returns the correct view ( the bottombost viewcontroller's view in the nav stack ). My problem is these views never get displayed ie the views extracted from the navController never gets displayed. If i try to create a new view and insert all the subviews of a view, it gets displayed. eg : UIView * newView = [[UIView alloc] init]; for (UIView *subView in [arr objectAtIndex:0]) [newView addSubView:subView]; self.view = newView; The above piece of code works. But simply adding the view doesnt seem to work.. Can anyone explain the solution? Many thanks

  Read the article

• Creating foreach loops using Code Igniter controller and view

  - by Tim

  Hello, This is a situation I have found myself in a few times and I just want clear it up once and for all. Best just to show you what I need to do in some example code. My Controller function my_controller() { $id = $this->uri->segment(3); $this->db->from('cue_sheets'); $this->db->where('id', $id); $data['get_cue_sheets'] = $this->db->get(); $this->db->from('clips'); $this->db->where('sheet_id', ' CUE SHEET ID GOES IN HERE ??? '); $data['get_clips'] = $this->db->get(); $this->load->view('show_sheets_and_clips', $data); } My View <?php if($get_cue_sheets->result_array()) { ?> <?php foreach($get_cue_sheets->result_array() as $sheetRow): ?> <h1><?php echo $sheetRow['sheet_name']; ?></h1> <br/> <?php if($get_clips->result_array()) { ?> <ul> <?php foreach($get_clips->result_array() as $clipRow): ?> <li><?php echo $clipRow['clip_name']; ?></li> <?php endforeach; ?> </ul> <?php } else { echo 'No Clips Found'; } ?> <?php endforeach; ?> <?php } ?> The problem I am having is the concept of passing data back to the controller from the view as I am sending the Database Queries off to the view as an array, when I really need to get some more information as to which sheet ID I am looking for to show the relevant clips. I hope this makes sense to someone out there. Thanks, Tim

  Read the article

• Getting values from the html to the controller

  - by tina

  Hi, I'm trying to access the values a user introduces in a table from my controller. This table is NOT part of the model, and the view source code is something like: <table id="tableSeriales" summary="Seriales" class="servicesT" cellspacing="0" style="width: 100%"> <tr> <td class="servHd">Seriales</td> </tr> <tr id="t0"> <td class="servBodL"> <input id="0" type="text" value="1234" onkeypress = "return handleKeyPress(event, this.id);"/> <input id="1" type="text" value="578" onkeypress = "return handleKeyPress(event, this.id);"/> . . . </td> </tr> </table> How can I get those values (1234, 578) from the controller? Receiving a formcollection doesn't work since it does not get the table... Thank you.

  Read the article

• Spring Controller redirect to another page

  - by user1386375

  Hey I got the following problem. This is the content of the jspx file: function postSMTH() { $.ajax({ type: "POST", url: document.getElementById("urltxt").value, data: parameters, }); } <input type="hidden" value="${pageContext.request.contextPath}/foo/foo2/foodat" name="urltxt" id="urltxt"/> <div class="foodat"><a href="javascript:postSMTH();"><spring:message code="foo_foo2_foodat_text" text="FOODAT"/></a></div> So if I push the submit button, the postSMTH function is called and the ajax object is paste to the Controller which look like this: @Controller @RequestMapping(value="/foo") public class FooController { .............. @RequestMapping(value="/foo2", method=RequestMethod.POST) public String homePOST(HttpServletRequest request) { ........ } @RequestMapping(value="/foo2", method=RequestMethod.GET) public String homeGET(HttpServletRequest request) { ........ } @RequestMapping(value="/foo2/foodat", method=RequestMethod.POST) public String doTHAT(HttpServletRequest request) { // check authorization Map fooMap = request.getParameterMap(); // do something in the Database, depending on the paramMap return "redirect:/foo/foo1"; } } Everything is working fine regarding the Database, but the Problem is, that the redirect at the end DOESN'T work. It just stays at the page foo2. I'm new to Spring, maybe its a little mistake somewhere. I just cant make it out by myself. Would be nice if someone would have some hint. Thanks

  Read the article

• Pass List of models to controller ASP.NET MVC 5

  - by user3697231

  I have a view where user can enter some data. But problem is this: Let's say you have 3 text box on view. Every time user can fill multiple times this 3 text boxes. To clarify, let's say user fills this 3 text boxes and press button which adds on form again these 3 text boxes. Now when user clicks submit this form is sent to controller, but how do I sent List of models as parameter. My architecture for this problem is something like this: MyModel public int ID { get;set; } public string Something { get; set; } /*This three textboxes can user set multiple times*/ /*Perhaps i Can create new model with these properties and then /*put List of that model as property here, but how to fill that list inside view ??*/ public string TextBoxOneValue { get; set; } public string TextBoxTwoValue { get; set; } public string TextBoxThreeValue { get; set; } Now, i was thinking that i Create PartialView with this 3 text boxes, and then when user clicks button on view another PartialView is loaded. And now, let's say I have Two partial views loaded, and user clicks submit, how that I pass list with values of these 3 text boxes to controller ??

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• What is a Linux device name for RAID of sas drives?

  - by flashnik

  I have a RAID1 using Promise FastTrack TX2650 consisting of 2 SAS drives. What is a Linux device name for them? Like sda is for first sata drive. I have Windows server so I can't look it directly but need this information for smartctl usage. UPDATE. I found how to access RAID: smartctl -d scsi sdb (because I also have a SATA drive). But in this case I just get an information about just raid controller though I wantto get information about drives itself. Is it possible? Promises's control panel provides information only about their healthy status (boolean) and I want more. Mostly now I need information about temperature.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Is mismatched firmware on drives in a raid-6 a bad thing?

  - by bwerks

  Hi all, I recently expanded a raid-1 to a raid-6 with six drives. I ordered all four of the new drives from the same place, and all of them were advertised to be the same drives as the original two--Seagate 15krpm 146gb. However, when I was looking at the drives in the perc6/i utility, one of them appeared to be an earlier firmware version; it had S515, compared to the other five drives with S527. Sure enough, after inspecting the drive itself, the label advertised the earlier firmware version. Running Dell's SAS firmware upgrade utility should have in theory moved them all up to S52A, but when I ran it it moved the S527 drives up to S52A, and left the S515 drive untouched. Is this something to be worried about? If it's something that should be corrected, is there a way to target a particular drive for upgrade since the firmware utility didn't seem to do it by itself?

  Read the article

• Is there any way to stop or pause Windows fake-raid re-synching?

  - by haimg

  I have two physical disks, each one holds two volumes, they are Windows fake-RAID1. E.g.: Disk A: Partition1 Partition2 Disk B: Partition1-Mirror Partition2-Mirror After an unclean reboot, Windows started resynching these as expected. What was not expected, however, is that it started resynching both volumes at the same time. Both disks seek back and forth like crazy, and synching performance is horrible. Question: Is these any option to stop or pause synching of just one volume? I know I can put one of the disks offline, but that will stop synchronization of all volumes on that disk. Note: I have certain reasons why I need to torture myself with Windows RAID. I'm not interested in alternative RAID solutions right now.

  Read the article

• Gigabyte Motherboard + Adaptec RAID = No Booting from any drives

  - by Farseeker

  I have a brand new PC, just out of the box. It has a Gigabyte GA-P55-USB3 motherboard. I also have an Adaptec ASR-2504 SAS RAID card with 2x 15k Seagate Barracuda SAS drives attached. After the motherboard init's its on-board RAID it then init's the Adaptec RAID. It detects all the RAID devices OK, but when it gets to Loading Operating System... (i.e. right before it should load the OS) it just sits there forever, doing nothing: If I force it to boot from the optical drive, you see it spin up for a few seconds then die down again. If I remove the Adaptec RAID card, everything works perfectly. As soon as it's plugged back in, it never gets past that stage. The RAID card should be perfectly fine (it was before), but I have raised a case with Adaptec anyway. Any suggestions on what I can try to get these two to play nicely together?

  Read the article

• How to install the TRIM RAID update for the Intel storage controller?

  - by Mike Pateras

  I just found this article, that says that Intel now supports TRIM for SSDs when the Intel storage controller is in RAID mode. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard) with RAID 0, if that's significant.

  Read the article

• Gentoo Linux -> Ubuntu: Can I Preserve My LVM/RAID Devices, Or Do I Need To Reformat?

  - by Eddie Parker

  Hello: I've got a Gentoo box that I'm interested in switching over to an Ubuntu box. I currently have the partitions laid out using a mixture of RAID (mdadm) and LVM2, as specified in this document [1]. Ideally I'd like to just wipe out the non /home partition, as it's got data I'd like to keep. Is it possible to reuse the current setup, or do I need to restart? vgdisplay, vgchange -a y, etc don't yield any results from the Ubuntu LiveCD, and I'm wary to run any commands that might wipe my data. Your help would be appreciated. [1] http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml

  Read the article

• Do I need DELL OpenManage to generate snmp traps on RAID degradation?

  - by jishi

  I need to setup surveillance on all our servers to spot any RAID degradation in time. However, not all of our servers have OpenManage installed, and since they are in production I don't like the idea of installing it on them. Therefor: Is it necessary to have it installed in order to get an event-log for any degradation of the RAID? Because, if I get an event-log I can send an SNMP trap, if I understand it correctly. I thought it was the driver that responsible for the event-logging, but on a machine that recently had a degradation, I can't seem to find any log event for it.

  Read the article

• does the *physical* order/location of drives in a mdadm-managed RAID-10 array matter?

  - by locuse

  i've setup a 4-drive RAID-10 array using mdadm-managed, software-raid on an x86_64 box. it'd up & running and works as expected, cat /proc/mdstat md127 : active raid10 sdc2[2] sdd2[3] sda2[0] sdb2[1] 1951397888 blocks super 1.2 512K chunks 2 far-copies [4/4] [UUUU] bitmap: 9/466 pages [36KB], 2048KB chunk atm the four SATA drives are physically plugged into the motherboard's 1st four SATA ports. i'd like to gather the necessary/complete info for catastrophic recovery. reading starting here, http://neil.brown.name/blog, and the mailing list, i'm not yet completely confident i have it right. i understand 'drive order matters'. is that logical, &/or physical order that matters? if i unplugged the four drives in this array, and plugged them each back into different ports on the motherboard or a pci card, as long as i've changed nothing in software config, will the array correctly auto-re-assemble?

  Read the article

• Cheap machine with Xen to have more than one personal dev servers with RAID option?

  - by AJ

  I do not have a lot of money so when I need a personal dev servers I decided I will use Xen on one machine to run various OS's. Although, I really like Dell Zino (http://www.dell.com/us/en/home/desktops/inspiron-zino-hd/pd.aspx?refid=inspiron-zino-hd&cs=19&s=dhs) as a very economical and compact PC which can be scaled to 8GB of RAM, I do not know how to have a RAID setup, for the backup. Is there an economical way to add a RAID setup to Dell Zino or I would have to invest in a proper box for that? Thanks for your help in advance. **Also, please let me know if this question is not meant for this forum.

  Read the article

• How to resize an encrypted LVM in RAID 1 in Linux?

  - by user28712

  Hi, I am running 3 partitions in RAID 1. Partition : Mountpoint : Filesystem : Encrypted : LVM ------------------------------------------------------ 1 : /boot : ext2 : No : No 2 : / : ext3 : Yes : No 3 : /home : xfs : Yes : Yes It now happens that I have given the root of the system too few gigs; i would like to shrink the LVM (3) and give the root(2) more space. How can I do this safely without messing up the system? In what order do I have to resize the raid partitions, encryption, lvm, file systems? Any help would be greatly appreciated. Adriaan

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >