Search Results

Search found 2649 results on 106 pages for 'signal slot'.

Page 30/106 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• What can cause a black or blank screen when pressing logout or switch user in windows 7

  - by Medran

  The situation I have here is related to a brand new dell machine with a GTX260 video card. Put simply after one user logs in when that user either 'switch users' or 'logs out' windows goes to a black/blank screen. The TV screen that is used with this computer previously functioned fine with fast user switching on an XP machine. The new computer is windows 7. The TV is not outputting any error messages like 'no signal' or anything else that would be displayed if the computer was off. You can fix the problem by cycling the input on television, after cycling the input the welcome screen appears as normal. What I want to know is what on earth is windows doing that would cause the video card to stop sending the same signal to the monitor when the user logs off or switches users. I mean as far as I can tell the resolution is identical between windows and the welcome screen. Or perhaps if somebody has experienced this before a fix would be great too.

  Read the article

• Display on secondary video card (Nvidia 8400 GS): horrible refresh, bogs system

  - by minameismud

  This is my work computer, but it's a small shop. We do business software development. The most hardcore thing we create is some web animations with html5 and fancy javascript/css. The base machine is a Dell Precision T3500 - Xeon W3550 (3.07GHz quad), 6GB ram, pair of 500GB harddrives, and Win 7 x64 Enterprise SP1. My primary video card is an ATI FirePro V4800 1GB in a PCIe slot of some speed driving a pair of 23s at 1920x1080 through DisplayPort-HDMI adapters. The secondary card is an NVidia GeForce 8400GS in a PCI slot driving a single 17" at 1280x1024 through DVI. On either of the 23" monitors, windows move smoothly, scroll quickly, and are generally very responsive. On the 17", it's slow, chunky, and when I'm trying to scroll a ton of content, Windows will occasionally suggest I drop to the Windows Basic theme. I've updated drivers for both cards, and I've gotten every Windows update relating to video. Specifically: ATI FirePro Provider: Advanced Micro Devices, Inc Date: 6/22/2014 Version: 13.352.1014.0 NVidia 8400 GS Provider: NVIDIA Date: 7/2/2014 Version: 9.18.13.4052 Unfortunately, new hardware isn't really an option. Is there anything I can do software-wise to speed up the NVidia-driven monitor?

  Read the article

• mysql_close doesn't kill locked sql requests

  - by Nikita

  I use mysqld Ver 5.1.37-2-log for debian-linux-gnu I perform mysql calls from c++ code with functions mysql_query. The problem occurs when mysql_query execute procedure, procedure locked on locked table, so mysql_query hangs. If send kill signal to application then we can see lock until table is locked. Create the following SQL table and procedure CREATE TABLE IF NOT EXISTS `tabletolock` ( `id` INT NOT NULL AUTO_INCREMENT, PRIMARY KEY (`id`) )ENGINE = InnoDB; DELIMITER $$ DROP PROCEDURE IF EXISTS `LOCK_PROCEDURE` $$ CREATE PROCEDURE `LOCK_PROCEDURE`() BEGIN SELECT id INTO @id FROM tabletolock; END $$ DELOMITER; There are sql commands to reproduce the problem: 1. in one terminal execute lock tables tabletolock write; 2. in another terminal execute call LOCK_PROCEDURE(); 3. In first terminal exeute show processlist and see | 2492 | root | localhost | syn_db | Query | 12 | Locked | SELECT id INTO @id FROM tabletolock | Then perfrom Ctrl-C in second terminal to interrupt our procudere and see processlist again. It is not changed, we already see locked select request and can teminate it by unlock tables or kill commands. Problem described is occured with mysql command line client. Also such problem exists when we use functions mysql_query and mysql_close. Example of c code: #include <iostream> #include <mysql/mysql.h> #include <mysql/errmsg.h> #include <signal.h> // g++ -Wall -g -fPIC -lmysqlclient dbtest.cpp using namespace std; MYSQL * connection = NULL; void closeconnection() { if(connection != NULL) { cout << "close connection !\n"; mysql_close(connection); mysql_thread_end(); delete connection; mysql_library_end(); } } void sigkill(int s) { closeconnection(); signal(SIGINT, NULL); raise(s); } int main(int argc, char ** argv) { signal(SIGINT, sigkill); connection = new MYSQL; mysql_init(connection); mysql_options(connection, MYSQL_READ_DEFAULT_GROUP, "nnfc"); if (!mysql_real_connect(connection, "127.0.0.1", "user", "password", "db", 3306, NULL, CLIENT_MULTI_RESULTS)) { delete connection; cout << "cannot connect\n"; return -1; } cout << "before procedure call\n"; mysql_query(connection, "CALL LOCK_PROCEDURE();"); cout << "after procedure call\n"; closeconnection(); return 0; } Compile it, and perform the folloing actions: 1. in first terminal local tables tabletolock write; 2. run program ./a.out 3. interrupt program Ctrl-C. on the screen we see that closeconnection function is called, so connection is closed. 4. in first terminal execute show processlist and see that procedure was not intrrupted. My question is how to terminate such locked calls from c code? Thank you in advance!

  Read the article

• Wireless with WEP extremely slow on an Acer Timeline 4810T with a Centrino Wireless-N 1000

  - by noq38

  I've upgraded an Acer Timeline 4810T to Ubuntu 11.10. Everything works fine except for the darn wireless interface (network manager). I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. This was no problem in 11.04 and prior. Is there a simple solution for this? Any suggestions? Here's more hardware information. Hopefully this helps to debug the network issue: sudo lshw -class network *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:3c:5e:e0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-13-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d2400000-d2401fff lspci 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no Many thanks for your help! I just tested the wireless interface over a non-encrypted signal and it works beautifully. The issue is definitely related to WEP. Unfortunately, some of the networks I need to connect to are WEP encrypted, therefore this is a serious issue for me that is preventing me from using Ubuntu on my laptop. Any suggestions?

  Read the article

• How to install the latest version of google earth on ubuntu 12.10 64-bit?

  - by user114769

  Chris here with a huge problem with the Google earth latest version. Gosh.. whenever I try to lunch the app this comes out. I'v Tried this web site nothing worked: (THANK YOU SO MUCH FOR EVEN READING THIS. MAY YOU GUYS HAVE A NICE DAY. christopher@christopher-E4300:~$ google-earth Google Earth has caught signal 11. We apologize for the inconvenience, but Google Earth has crashed. This is a bug in the program, and should never happen under normal circumstances. A bug report and debugging data have been written to this text file: /home/christopher/.googleearth/crashlogs/crashlog-50cbd67e.txt Please include this file if you submit a bug report to Google. https://help.ubuntu.com/community/GoogleEarth#Installing_the_.deb_file_downloaded_from_the_Google_Earth_Website Here is the content of /home/christopher/.googleearth/crashlogs/crashlog-50cbd67e.txt Major Version 7 Minor Version 0 Build Number 0001 Build Date Oct 29 2012 Build Time 19:13:39 OS Type 3 OS Major Version 3 OS Minor Version 5 OS Build Version 0 OS Patch Version 0 Crash Signal 11 Crash Time 1355535998 Up Time 0.789556 Stacktrace from glibc: ./libgoogleearth_free.so(+0x1e9cfb)[0xf757dcfb] ./libgoogleearth_free.so(+0x1e9f43)[0xf757df43] [0xf7726400]

  Read the article

• TV Antenna Helper Makes HDTV Antenna Calibration a Snap

  - by ETC

  If you’re rocking an Android device, TV Antenna Helper is a free tool that will help you orient your HDTV antenna for best signal strength. The free (ad-supported) application checks your location and lists all the HDTV stations within range. You can check signal strength, use compass bearings to help align the antenna with the stations you want to tune, and check additional information about the station and your orientation to it. It’s the kind of tool you won’t need everyday but when trotted out will save you tons of time and aggravation. Hit up the link below for more information and to grab a free copy for your Android device. TV Antenna Helper [Android Market via Addictive Tips] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform]

  Read the article

• What causes critical glib errors (when coding using messaging menu)?

  - by fluteflute

  If I run the python code below (almost entirely from this useful blog post) then I get three identical nasty looking error messages in the terminal. What might be causing them? I note the number (5857 in the example below) changes slightly on each run. What does this number signify? Is it a memory location or something similar? (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed (messaging-menu.py:5857): GLib-GIO-CRITICAL **: g_dbus_method_invocation_return_dbus_error: assertion `error_name != NULL && g_dbus_is_name (error_name)' failed I'm running this on Natty, I should probably find out if I get the same errors in 10.10 though... import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() gtk.main()

  Read the article

• Best practice with pyGTK and Builder XML files

  - by Phoenix87

  I usually design GUI with Glade, thus producing a series of Builder XML files (one such file for each application window). Now my idea is to define a class, e.g. MainWindow, that inherits from gtk.Window and that implements all the signal handlers for the application main window. The problem is that when I retrieve the main window from the containing XML file, it is returned as a gtk.Window instance. The solution I have adopted so far is the following: I have defined a class "Window" in the following way class Window(): def __init__(self, win_name): builder = gtk.Builder() self.builder = builder builder.add_from_file("%s.glade" % win_name) self.window = builder.get_object(win_name) builder.connect_signals(self) def run(self): return self.window.run() def show_all(self): return self.window.show_all() def destroy(self): return self.window.destroy() def child(self, name): return self.builder.get_object(name) In the actual application code I have then defined a new class, say MainWindow, that inherits frow Window, and that looks like class Main(Window): def __init__(self): Window.__init__(self, "main") ### Signal handlers ##################################################### def on_mnu_file_quit_activated(self, widget, data = None): ... The string "main" refers to the main window, called "main", which resides into the XML Builder file "main.glade" (this is a sort of convention I decided to adopt). So the question is: how can I inherit from gtk.Window directly, by defining, say, the class Foo(gtk.Window), and recast the return value of builder.get_object(win_name) to Foo?

  Read the article

• recent unreliable wireless connection on 10.04 and 10.10

  - by gabkdlly

  Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

  Read the article

• Why, when on Kubuntu I lose internet connection, am I unable to reconnect?

  - by Jonathan

  Using Kubuntu 11.10. Sony Vaio computer. Network controller: Intel Corporation WiFi Link 5100. If I connect to a wireless network, and the signal drops, then I am unable to connect to any network without a reboot. I can assure that the issue has nothing to do with the computer going to sleep, as I have experienced the above while using my computer continuously. Here is exactly what happens: Connect to network (at University, where the connection is not so great). The connection is broken There are three other possible networks available, but none of them can be connected to. I have tried off and on sometimes for hours. I am always able to reestablish a connection after a reboot. I can only think of two explanations. The first is that a temp file is corrupted when the internet connection is abruptly dropped. The second is that my computer actually corrupts something before the loss of internet connection, which causes the loss in signal, and inability to reconnect. However, I am not confident that my explanations are complete, nor do I have any idea how to test these things.

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• How to apply verification and validation on the following example

  - by user970696

  I have been following verification and validation questions here with my colleagues, yet we are unable to see the slight differences, probably caused by language barrier in technical English. An example: Requirement specification User wants to control the lights in 4 rooms by remote command sent from the UI for each room separately. Functional specification The UI will contain 4 checkboxes labelled according to rooms they control. When a checkbox is checked, the signal is sent to corresponding light. A green dot appears next to the checkbox When a checkbox is unchecked, the signal (turn off) is sent to corresponding light. A red dot appears next to the checkbox. Let me start with what I learned here: Verification, according to many great answers here, ensures that product reflects specified requirements - as functional spec is done by a producer based on requirements from customer, this one will be verified for completeness, correctness). Then design document will be checked against functional spec (it should design 4 checkboxes..), and the source code against design (is there a code for 4 checkboxes, functions to send the signals etc. - is it traceable to requirements). Okay, product is built and we need to test it, validate. Here comes our understanding trouble - validation should ensure the product meets requirements for its specific intended use which is basically business requirement (does it work? can I control the lights from the UI?) but testers will definitely work with the functional spec, making sure the checkboxes are there, working, labelled, etc. They are basically checking whether the requirements in functional spec were met in the final product, isn't that verification? (should not be, lets stick to ISO 12207 that only validation is the actual testing)

  Read the article

• Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

  - by user1622959

  A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

  Read the article

• How do I require use of the 5 GHz band when connecting to a Wireless N access point?

  - by cqcallaw

  What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• Configuring an Engenius 3500

  - by dsiddens

  The title speaks to only half of the issue: the other half are the settings in Ubuntu and the sequences therein. The computer in this issue does receive internet with the external antenna jack at the back being fed with a simple magnetic base antenna designed for putting on the roof of an automobile. However, that signal is weak and the Engenius with an external antenna (Rootenna ~15db gain) and ehternet wire will supply a stronger, faster signal. I've set the Engenius to the desired source and entered the correct WEP password. The lights on the Engenius indicate that it's connected to the access point. At the Ubuntu side of this I've worked to no avail changing settings with "Edit Connections" to the point I'm Ask(ing)Ubuntu for help. I have and have RTFM for Engenius 3500 There is an embarrassing side note to this issue: At one time I had the Engenius working! It seems that I can't recall the settings and sequences I used way back when. And I may as well confess to not knowing the Command Line. I'm a GUI guy. Thank you for your time, Doug

  Read the article

• Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

  - by Chantz

  So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

  Read the article

• SQL SERVER – Single Wait Time Introduction with Simple Example – Wait Type – Day 2 of 28

  - by pinaldave

  In this post, let’s delve a bit more in depth regarding wait stats. The very first question: when do the wait stats occur? Here is the simple answer. When SQL Server is executing any task, and if for any reason it has to wait for resources to execute the task, this wait is recorded by SQL Server with the reason for the delay. Later on we can analyze these wait stats to understand the reason the task was delayed and maybe we can eliminate the wait for SQL Server. It is not always possible to remove the wait type 100%, but there are few suggestions that can help. Before we continue learning about wait types and wait stats, we need to understand three important milestones of the query life-cycle. Running - a query which is being executed on a CPU is called a running query. This query is responsible for CPU time. Runnable – a query which is ready to execute and waiting for its turn to run is called a runnable query. This query is responsible for Single Wait time. (In other words, the query is ready to run but CPU is servicing another query). Suspended – a query which is waiting due to any reason (to know the reason, we are learning wait stats) to be converted to runnable is suspended query. This query is responsible for wait time. (In other words, this is the time we are trying to reduce). In simple words, query execution time is a summation of the query Executing CPU Time (Running) + Query Wait Time (Suspended) + Query Single Wait Time (Runnable). Again, it may be possible a query goes to all these stats multiple times. Let us try to understand the whole thing with a simple analogy of a taxi and a passenger. Two friends, Tom and Danny, go to the mall together. When they leave the mall, they decide to take a taxi. Tom and Danny both stand in the line waiting for their turn to get into the taxi. This is the Signal Wait Time as they are ready to get into the taxi but the taxis are currently serving other customer and they have to wait for their turn. In other word they are in a runnable state. Now when it is their turn to get into the taxi, the taxi driver informs them he does not take credit cards and only cash is accepted. Neither Tom nor Danny have enough cash, they both cannot get into the vehicle. Tom waits outside in the queue and Danny goes to ATM to fetch the cash. During this time the taxi cannot wait, they have to let other passengers get into the taxi. As Tom and Danny both are outside in the queue, this is the Query Wait Time and they are in the suspended state. They cannot do anything till they get the cash. Once Danny gets the cash, they are both standing in the line again, creating one more Single Wait Time. This time when their turn comes they can pay the taxi driver in cash and reach their destination. The time taken for the taxi to get from the mall to the destination is running time (CPU time) and the taxi is running. I hope this analogy is bit clear with the wait stats. You can check the single wait stats using following query of Glenn Berry. -- Signal Waits for instance SELECT CAST(100.0 * SUM(signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%signal (cpu) waits], CAST(100.0 * SUM(wait_time_ms - signal_wait_time_ms) / SUM (wait_time_ms) AS NUMERIC(20,2)) AS [%resource waits] FROM sys.dm_os_wait_stats OPTION (RECOMPILE); Higher the single wait stats are not good for the system. Very high value indicates CPU pressure. In my experience, when systems are running smooth and without any glitch the single wait stat is lower than 20%. Again, this number can be debated (and it is from my experience and is not documented anywhere). In other words, lower is better and higher is not good for the system. In future articles we will discuss in detail the various wait types and wait stats and their resolution. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• KVM Guest installed from console. But how to get to the guest's console?

  - by badbishop

  I'm trying to install a fully virtualized guest (Fedora 14 x86_64) on KVM (RHEL 6), using command-line only (both hypervisor and guest). It goes without errors, and without a tangible result . I'd like to know how to do a text-only installation. So, here's what I've done: # virt-install \ --name=FE --ram=756 --vcpus=1 \ --file=/var/lib/libvirt/images/FE.img --network bridge:br0 \ --nographics --os-type=linux \ --extra-args='console=tty0' -v \ --cdrom=/media/usb/Fedora-14-x86_64-Live-Desktop.iso Starting install... Creating domain... | 0 B 00:00 Connected to domain FE Escape character is ^] ÿ Now what? As I understand after googling for a couple of days, I should see the guest's output from the text installation, but nothing happens. virt-viewer cannot connect to it, kindly suggesting that I explore all the options by adding --help (which I did). If I reconnect with virsh, I see this: Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@v ~] # virsh console FEConnected to domain FE Escape character is ^] This shows that VM is running # virsh list Id Name State ---------------------------------- 8 FE running Qemu log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -S -M rhel6.0.0 -enable-kvm -m 756 -smp 1,sockets=1,cores=1,threads=1 -name FE -uuid 6989d008-7c89-424c-d2d3-f41235c57a18 -nographic -nodefconfig -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/FE.monitor,server,nowait -mon chardev=monitor,mode=control -rtc base=utc -no-reboot -boot d -drive file=/var/lib/libvirt/images/FE.img,if=none,id=drive-ide0-0-0,format=raw,cache=none -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/media/usb/Fedora-14-x86_64-Live-Desktop.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0a:65:8d,bus=pci.0,addr=0x2 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 char device redirected to /dev/pts/1 Output of /etc/libvirt/qemu/FE.xml # cat /etc/libvirt/qemu/FE.xml <domain type='kvm'> <name>FE</name> <uuid>6989d008-7c89-424c-d2d3-f41235c57a18</uuid> <memory>774144</memory> <currentMemory>774144</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/var/lib/libvirt/images/FE.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0a:65:8d'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </memballoon> </devices> </domain> I'm obviously missing something that many others don't, but what is it? Thanx in advance!

  Read the article

• Can't remove the libpcap0.8 package

  - by Yogesh

  I am getting error when running apt-get remove root@System:~/Downloads# sudo apt-get remove The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. and when I ran apt-get remove -f this is what happens: root@System:~/Downloads# sudo apt-get remove -f The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# clear root@System:~/Downloads# sudo apt-get remove -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads# root@System:~/Downloads# sudo apt-get check Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libpcap0.8 : Breaks: libpcap0.8:i386 (!= 1.4.0-2) but 1.5.3-2 is installed libpcap0.8:i386 : Breaks: libpcap0.8 (!= 1.5.3-2) but 1.4.0-2 is installed libpcap0.8-dev : Depends: libpcap0.8 (= 1.5.3-2) but 1.4.0-2 is installed E: Unmet dependencies. Try using -f. root@System:~/Downloads# apt-cache policy libpcap0.8:amd64 libpcap0.8 libpcap0.8-dev libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8: Installed: 1.4.0-2 Candidate: 1.5.3-2 Version table: 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages *** 1.4.0-2 0 100 /var/lib/dpkg/status libpcap0.8-dev: Installed: 1.5.3-2 Candidate: 1.5.3-2 Version table: *** 1.5.3-2 0 500 http://in.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages 100 /var/lib/dpkg/status root@System:~/Downloads# root@System:~/Downloads# sudo apt-get -f remove libpcap0.8 libpcap0.8-dev libpcap0.8-dev:i386 libpcap0.8:i386 Reading package lists... Done Building dependency tree Reading state information... Done Package 'libpcap0.8-dev:i386' is not installed, so not removed. Did you mean 'libpcap0.8-dev'? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libpcap-dev : Depends: libpcap0.8-dev but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@System:~/Downloads# sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libpcap0.8 The following packages will be upgraded: libpcap0.8 1 upgraded, 0 newly installed, 0 to remove and 365 not upgraded. 2 not fully installed or removed. Need to get 0 B/110 kB of archives. After this operation, 13.3 kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 163539 files and directories currently installed.) Preparing to unpack .../libpcap0.8_1.5.3-2_amd64.deb ... Unpacking libpcap0.8:amd64 (1.5.3-2) over (1.4.0-2) ... dpkg: error processing archive /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb (--unpack): trying to overwrite shared '/usr/share/man/man7/pcap-filter.7.gz', which is different from other instances of package libpcap0.8:amd64 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Processing triggers for man-db (2.6.7.1-1) ... Errors were encountered while processing: /var/cache/apt/archives/libpcap0.8_1.5.3-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) root@System:~/Downloads#

  Read the article

• qwebview in pyside after packaged with pyinstaller goes wrong

  - by truease.com

  Here's my code import sys from PySide.QtCore import * from PySide.QtGui import * from PySide.QtWebKit import * from encodings import * from codecs import * class BrowserWindow( QWidget ): def __init__( self, parent=None ): QWidget.__init__( self, parent ) self.Setup() self.SetupEvent() def Setup( self ): self.setWindowTitle( u"Truease Speedy Browser" ) self.addr_input = QLineEdit() self.addr_go = QPushButton( "GO" ) self.addr_bar = QHBoxLayout() self.addr_bar.addWidget( self.addr_input ) self.addr_bar.addWidget( self.addr_go ) for attr in [ QWebSettings.AutoLoadImages, QWebSettings.JavascriptEnabled, QWebSettings.JavaEnabled, QWebSettings.PluginsEnabled, QWebSettings.JavascriptCanOpenWindows, QWebSettings.JavascriptCanAccessClipboard, QWebSettings.DeveloperExtrasEnabled, QWebSettings.SpatialNavigationEnabled, QWebSettings.OfflineStorageDatabaseEnabled, QWebSettings.OfflineWebApplicationCacheEnabled, QWebSettings.LocalStorageEnabled, QWebSettings.LocalStorageDatabaseEnabled, QWebSettings.LocalContentCanAccessRemoteUrls, QWebSettings.LocalContentCanAccessFileUrls, ]: QWebSettings.globalSettings().setAttribute( attr, True ) self.web_view = QWebView() self.web_view.load( "http://www.baidu.com" ) layout = QVBoxLayout() layout.addLayout( self.addr_bar ) layout.addWidget( self.web_view ) self.setLayout( layout ) def SetupEvent( self ): self.connect( self.addr_input, SIGNAL("editingFinished()"), self, SLOT("Load()"), ) self.connect( self.addr_go, SIGNAL("pressed()"), self, SLOT("Load()") ) self.connect( self.web_view, SIGNAL("urlChanged(const QUrl&)"), self, SLOT("SetURL()"), ) def Load( self, *args, **kwargs ): url = self.GetCleanedURL() if url != self.CurrentURL(): self.web_view.load( url ) def SetURL( self, *args, **kwargs ): self.addr_input.setText( self.CurrentURL() ) def GetCleanedURL( self ): url = self.addr_input.text().strip() if not url.startswith("http"): url = "http://" + url return url def CurrentURL( self ): url = self.web_view.url().toString() return url def Main(): app = QApplication( sys.argv ) widget = BrowserWindow() widget.show() return app.exec_() if __name__ == '__main__': sys.exit( Main() ) I works well when i using python browser.py. but it goes wrong after packaged with pyinstaller -w browser.py. it doesn't load images can only display correct text in utf-8 And this is the pyinstaller output: E:\true\wuk\app2>pyinstaller -w b.py 16 INFO: wrote E:\true\wuk\app2\b.spec 16 INFO: Testing for ability to set icons, version resources... 32 INFO: ... resource update available 32 INFO: UPX is not available. 46 INFO: Processing hook hook-os 141 INFO: Processing hook hook-time 157 INFO: Processing hook hook-cPickle 218 INFO: Processing hook hook-_sre 312 INFO: Processing hook hook-cStringIO 407 INFO: Processing hook hook-encodings 421 INFO: Processing hook hook-codecs 750 INFO: Processing hook hook-httplib 750 INFO: Processing hook hook-email 843 INFO: Processing hook hook-email.message 1046 WARNING: library python%s%s required via ctypes not found 1171 INFO: Extending PYTHONPATH with E:\true\wuk\app2 1171 INFO: checking Analysis 1171 INFO: building because b.py changed 1171 INFO: running Analysis out00-Analysis.toc 1171 INFO: Adding Microsoft.VC90.CRT to dependent assemblies of final executable 1171 INFO: Searching for assembly x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww ... 1171 INFO: Found manifest C:\WINDOWS\WinSxS\Manifests\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375.manifest 1187 INFO: Searching for file msvcr90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcr90.dll 1187 INFO: Searching for file msvcp90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcp90.dll 1187 INFO: Searching for file msvcm90.dll 1187 INFO: Found file C:\WINDOWS\WinSxS\x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_x-ww_d08d0375\msvcm90.dll 1266 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\_pyi_bootstrap.py 1266 INFO: Processing hook hook-os 1282 INFO: Processing hook hook-site 1296 INFO: Processing hook hook-encodings 1391 INFO: Processing hook hook-time 1407 INFO: Processing hook hook-cPickle 1468 INFO: Processing hook hook-_sre 1578 INFO: Processing hook hook-cStringIO 1671 INFO: Processing hook hook-codecs 2016 INFO: Processing hook hook-httplib 2016 INFO: Processing hook hook-email 2109 INFO: Processing hook hook-email.message 2312 WARNING: library python%s%s required via ctypes not found 2468 INFO: Processing hook hook-pydoc 2516 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_importers.py 2609 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_archive.py 2687 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_carchive.py 2782 INFO: Analyzing D:\Applications\Python\lib\site-packages\pyinstaller-2.1-py2.7.egg\PyInstaller\loader\pyi_os_path.py 2782 INFO: Analyzing b.py 2796 INFO: Processing hook hook-PySide 2875 INFO: Hidden import 'codecs' has been found otherwise 2875 INFO: Hidden import 'encodings' has been found otherwise 2875 INFO: Looking for run-time hooks 7766 INFO: Using Python library C:\WINDOWS\system32\python27.dll 7796 INFO: E:\true\wuk\app2\build\b\out00-Analysis.toc no change! 7796 INFO: checking PYZ 7812 INFO: checking PKG 7812 INFO: building because E:\true\wuk\app2\build\b\b.exe.manifest changed 7812 INFO: building PKG (CArchive) out00-PKG.pkg 7828 INFO: checking EXE 7843 INFO: rebuilding out00-EXE.toc because pkg is more recent 7843 INFO: building EXE from out00-EXE.toc 7843 INFO: Appending archive to EXE E:\true\wuk\app2\build\b\b.exe 7843 INFO: checking COLLECT 7843 INFO: building COLLECT out00-COLLECT.toc Use pyinstaller browser.py, and in the console window i got QFont::setPixelSize: Pixel size <= 0 (0) QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QSslSocket: cannot call unresolved function SSLv23_client_method QSslSocket: cannot call unresolved function SSL_CTX_new QSslSocket: cannot call unresolved function SSL_library_init QSslSocket: cannot call unresolved function ERR_get_error QFont::setPixelSize: Pixel size <= 0 (0)

  Read the article

• Travelling MVP #4: DevReach 2012

  - by DigiMortal

  Our next stop after Varna was Sofia where DevReach happens. DevReach is one of my favorite conferences in Europe because of sensible prices and strong speakers line-up. Also they have VIP-party after conference and this is good event to meet people you don’t see every day, have some discussion with speakers and find new friends. Our trip from Varna to Sofia took about 6.5 hours on bus. As I was tired from last evening it wasn’t problem for me as I slept half the trip. After smoking pause in Velike Tarnovo I watched movies from bus TV. We had supper later in city center Happy’s – place with good meat dishes and nice service. And next day it begun…. :) DevReach 2012 DevReach is held usually in Arena Mladost. It’s near airport and Telerik office. The event is organized by local MVP Martin Kulov together with Telerik. Two days of sessions with strong speakers is good reason enough for me to go to visit some event. Some topics covered by sessions: Windows 8 development web development SharePoint Windows Azure Windows Phone architecture Visual Studio Practically everybody can find some interesting session in every time slot. As the Arena is not huge it is very easy to go from one sessions to another if selected session for time slot is not what you expected. On the second floor of Arena there are many places where you can eat. There are simple chunk-food places like Burger King and also some restaurants. If you are hungry you will find something for your taste for sure. Also you can buy beer if it is too hot outside :) Weather was very good for October – practically Estonian summer – 25C and over. Sessions I visited Here is the list of sessions I visited at DevReach 2012: DevReach 2012 Opening & Welcome Messsage with Martin Kulov and Stephen Forte Principled N-Tier Solution Design with Steve Smith Data Patterns for the Cloud with Brian Randell .NET Garbage Collection Performance Tips with Sasha Goldshtein Building Secured, Scalable, Low-latency Web Applications with the Windows Azure Platform with Ido Flatow It’s a Knockout! MVVM Style Web Applications with Charles Nurse Web Application Architecture – Lessons Learned from Adobe Brackets with Brian Rinaldi Demystifying Visual Studio 2012 Performance Tools with Martin Kulov SPvNext – A Look At All the Exciting And New Features In SharePoint with Sahil Malik Portable Libraries – Why You Should Care with Lino Tadros I missed some sessions because of some death march projects that are going and that I have to coordinate but it was not big loss as I had time to walk around in session venue neighborhood and see Sofia Business Park. Next year again! I will be there again next year and hopefully more guys from Estonia will join me. I think it’s good idea to take short vacation for DevReach time and do things like we did this time – Bucharest, Varna, Sofia. It’s only good idea to plan some more free time so we are not very much in hurry and also we have no work stuff to do on the trip. This far this trip has been one of best trips I have organized and I will go and meet all those guys in this region again! :)

  Read the article

• pre-commit hook in svn: could not be translated from the native locale to UTF-8

  - by Alexandre Moraes

  Hi everybody, I have a problem with my pre-commit hook. This hook test if a file is locked when the user commits. When a bad condition happens, it should output that the another user is locking this file or if nobody is locking, it should show "you are not locking this file message (file´s name)". The error happens when the file´s name has some latin character like "ç" and tortoise show me this in the output. Commit failed (details follow): Commit blocked by pre-commit hook (exit code 1) with output: [Erro output could not be translated from the native locale to UTF-8.] Do you know how can I solve this? Thanks, Alexandre My shell script is here: #!/bin/sh REPOS="$1" TXN="$2" export LANG="en_US.UTF-8" /app/svn/hooks/ensure-has-need-lock.pl "$REPOS" "$TXN" if [ $? -ne 0 ]; then exit 1; fi exit 0 And my perl is here: !/usr/bin/env perl #Turn on warnings the best way depending on the Perl version. BEGIN { if ( $] >= 5.006_000) { require warnings; import warnings; } else { $^W = 1; } } use strict; use Carp; &usage unless @ARGV == 2; my $repos = shift; my $txn = shift; my $svnlook = "/usr/local/bin/svnlook"; my $user; my $ok = 1; foreach my $program ($svnlook) { if (-e $program) { unless (-x $program) { warn "$0: required program $program' is not executable, ", "edit $0.\n"; $ok = 0; } } else { warn "$0: required program $program' does not exist, edit $0.\n"; $ok = 0; } } exit 1 unless $ok; unless (-e $repos){ &usage("$0: repository directory $repos' does not exist."); } unless (-d $repos){ &usage("$0: repository directory $repos' is not a directory."); } foreach my $user_tmp (&read_from_process($svnlook, 'author', $repos, '-t', $txn)) { $user = $user_tmp; } my @errors; foreach my $transaction (&read_from_process($svnlook, 'changed', $repos, '-t', $txn)){ if ($transaction =~ /^U. (.*[^\/])$/){ my $file = $1; my $err = 0; foreach my $locks (&read_from_process($svnlook, 'lock', $repos, $file)){ $err = 1; if($locks=~ /Owner: (.*)/){ if($1 != $user){ push @errors, "$file : You are not locking this file!"; } } } if($err==0){ push @errors, "$file : You are not locking this file!"; } } elsif($transaction =~ /^D. (.*[^\/])$/){ my $file = $1; my $tchan = &read_from_process($svnlook, 'lock', $repos, $file); foreach my $locks (&read_from_process($svnlook, 'lock', $repos, $file)){ push @errors, "$1 : cannot delete locked Files"; } } elsif($transaction =~ /^A. (.*[^\/])$/){ my $needs_lock; my $path = $1; foreach my $prop (&read_from_process($svnlook, 'proplist', $repos, '-t', $txn, '--verbose', $path)){ if ($prop =~ /^\s*svn:needs-lock : (\S+)/){ $needs_lock = $1; } } if (not $needs_lock){ push @errors, "$path : svn:needs-lock is not set. Pleas ask TCC for support."; } } } if (@errors) { warn "$0:\n\n", join("\n", @errors), "\n\n"; exit 1; } else { exit 0; } sub usage { warn "@_\n" if @_; die "usage: $0 REPOS TXN-NAME\n"; } sub safe_read_from_pipe { unless (@_) { croak "$0: safe_read_from_pipe passed no arguments.\n"; } print "Running @_\n"; my $pid = open(SAFE_READ, '-|'); unless (defined $pid) { die "$0: cannot fork: $!\n"; } unless ($pid) { open(STDERR, ">&STDOUT") or die "$0: cannot dup STDOUT: $!\n"; exec(@_) or die "$0: cannot exec @_': $!\n"; } my @output; while (<SAFE_READ>) { chomp; push(@output, $_); } close(SAFE_READ); my $result = $?; my $exit = $result >> 8; my $signal = $result & 127; my $cd = $result & 128 ? "with core dump" : ""; if ($signal or $cd) { warn "$0: pipe from @_' failed $cd: exit=$exit signal=$signal\n"; } if (wantarray) { return ($result, @output); } else { return $result; } } sub read_from_process { unless (@_) { croak "$0: read_from_process passed no arguments.\n"; } my ($status, @output) = &safe_read_from_pipe(@_); if ($status) { if (@output) { die "$0: @_' failed with this output:\n", join("\n", @output), "\n"; } else { die "$0: @_' failed with no output.\n"; } } else { return @output; } }

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >