Search Results

Search found 1059 results on 43 pages for 'water damage'.

Page 30/43 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Live-Ubuntu 12.04 ran fine, now stopped booting!

  - by user89743

  I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

  Read the article

• Is OOP hard because it is not natural?

  - by zvrba

  One can often hear that OOP naturally corresponds to the way people think about the world. But I would strongly disagree with this statement: We (or at least I) conceptualize the world in terms of relationships between things we encounter, but the focus of OOP is designing individual classes and their hierarchies. Note that, in everyday life, relationships and actions exist mostly between objects that would have been instances of unrelated classes in OOP. Examples of such relationships are: "my screen is on top of the table"; "I (a human being) am sitting on a chair"; "a car is on the road"; "I am typing on the keyboard"; "the coffee machine boils water", "the text is shown in the terminal window." We think in terms of bivalent (sometimes trivalent, as, for example in, "I gave you flowers") verbs where the verb is the action (relation) that operates on two objects to produce some result/action. The focus is on action, and the two (or three) [grammatical] objects have equal importance. Contrast that with OOP where you first have to find one object (noun) and tell it to perform some action on another object. The way of thinking is shifted from actions/verbs operating on nouns to nouns operating on nouns -- it is as if everything is being said in passive or reflexive voice, e.g., "the text is being shown by the terminal window". Or maybe "the text draws itself on the terminal window". Not only is the focus shifted to nouns, but one of the nouns (let's call it grammatical subject) is given higher "importance" than the other (grammatical object). Thus one must decide whether one will say terminalWindow.show(someText) or someText.show(terminalWindow). But why burden people with such trivial decisions with no operational consequences when one really means show(terminalWindow, someText)? [Consequences are operationally insignificant -- in both cases the text is shown on the terminal window -- but can be very serious in the design of class hierarchies and a "wrong" choice can lead to convoluted and hard to maintain code.] I would therefore argue that the mainstream way of doing OOP (class-based, single-dispatch) is hard because it IS UNNATURAL and does not correspond to how humans think about the world. Generic methods from CLOS are closer to my way of thinking, but, alas, this is not widespread approach. Given these problems, how/why did it happen that the currently mainstream way of doing OOP became so popular? And what, if anything, can be done to dethrone it?

  Read the article

• Attaching new animations onto skeleton via props, a good idea?

  - by Cardin

  I'm thinking of coding a game with an idea of mine. I've coded 2D games before, but I'm new to 3D programming, so I'd like to ask if this idea of mine is feasible or out of my depth. I'm making a game where there are many different characters for the player to choose from (JRPG style). So to save time, I have an idea of creating many different varied characters using a completely naked body mesh and animation skeleton, standardised across all characters. For example, by placing different hair, boots, armor props on the character mesh, new characters can be formed. Kinda like playing dress-up with a barbie doll. I'm thinking this can be done by having a bone on the prop that I can programmically attach to the main mesh. Also, I plan to have some props add new animations to the base skeleton, so equipping some particular props would give it new attack, damage, idle animations. This is because I can't expect the character to have the same swinging animation if he had a big sword or an axe. I think this might be possible if the prop has its own instance of the animation skeleton with just only the new animations, and parenting the base body mesh to this new skeleton. So all the base body mesh has are just the basic animations, other animations come from the props. My concerns are, 1) the props might not attach to the mesh properly and jitter a lot, 2) since prop and body are animated differently, the props and base mesh will cause visual artefacts, like the naked thighs showing through the pants when the character walks, 3) a custom pipeline have to be developed to export skeletons without mesh, and also to attach the base body mesh to a new skeleton during runtime in the game. So my question: are these features considered 'easy' to code? Or am I trying to do something few have ever succeeded with on their own? It feels like all these can be done given enough time and I know I definitely have to do a bit of bone matrix calculations, but I really don't want to drag out the development timeline unnecessarily from coding mathematically intense things or analyzing how to parse 3D export formats. I'm currently only at the Game Design stage, so if these features aren't a good idea, I can simply change the design of the game. (Unrelated to question) I could always, as last resort, have the characters have predetermined outfit and weapon selections so as to animate everything manually.

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• Are there software options (preferabbly .NET) for doing distance and speed analysis of footballers moving on video?

  - by Anonymous Type

  Editing Question for Clarity Thanks for feedback so far, very insightful. I'm not sure how far along this part of the software community is, and what if any libraries exist for me to leverage from. Heres what I'm trying to do. Problem: Take an existing video of a game of rugby league. The Rugby League field is 100 metres long, 70 metres wide, and has white line markings every 10 metres running along the width of the field, as well as along the sidelines. Each side has 13 players on the field. Players on each team have identical jerseys that normally constrast strongly against background colours (green/brown field colour) and the referee's colour (usually yellow) and the designated water runner (orange). All players have a unique number in thick white lettering on their backs for identification. Video is taken with a high definition camera. Currently only one camera is used (2D) and existing video does not contain a foreground object of fixed spatial dimensions (as suggested in one answer for comparision measurements, however I could add this to future filming sessions if it is worthwhile). The player's do not run in a straight line 50% of the time but will go sideways on on a diagonal to the play the ball. The distance measured always starts from the spot of the previous "tackle", which ends where the player stops forward movement. It is not always possible to determine the players number from the video (facing other direction, sunlight, others standing in the way of the camera). But this isn't important as the software could allow for manual inputting of unknown "runs" at a later point after analysis. Determine the distance between two points (i.e. where the player started his "run" and where he finished it). I'm guessing that this would be quite doable if I manually marked the start and end point in the video. But how would I use landmarks in the background to determine the distance (assuming the person taking the video has kept it from jerking around). Question: Do software packages or libraries exist that are specialised enough to assist with writing analysis software to determine a sports persons distance travelled based on video taken of the performance?

  Read the article

• Why is my mouse randomly deselecting and unclicking?

  - by Coldblackice

  (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

  Read the article

• How to reset Bash on Mac OSX, .bash_profile corrupted and bash no longer works

  - by user1463172

  I am on a MacBook Pro, running the latest version of Mountain Lion. I really need some help, I have managed some how to damage my .bash_profile (I think) so that every time I open up the terminal I get the error listed below. -bash: export: `/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/go/bin': not a valid identifier -bash: export: `/Users/rob/Applications/sbt/bin:': not a valid identifier env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory -bash: tar: command not found -bash: grep: command not found -bash: cat: command not found -bash: find: command not found I am not sure what has happened, I have no sudo, cd or any normal commands. The only way I have been able to get to any of the main directories is through the go to folder command in finder and try to find the file to no avail. To top it all off I think I created a file that might be causing the issue, I wanted to edit the .bash_profile so I typed sudo nano ./bash_profile This open a new file in nano which I think was then saved. After this I opened the real .bash_profile to add in the path for node.js. If I can get to the .bash_profile I think I can get it back on track but I can't find it, should I reinstall bash? If so how would I do that on a mac, I tried using brew install bash to which I get -bash: brew: command not found I am really stuck if anyone can help I would be really appreciated. Many thanks

  Read the article

• CHKDSK: What option DOES NOT delete files and turn them into .chk files?

  - by CHKDSKuser

  I had a recent power outage while using my computer, with a 1TB hard drive being directly accessed as the power went out. When the power came back on, and I rebooted my computer, one of my 1TB hard drives would not register with WinXP SP3, and showed a Total Space of 0, and an Available Space of 0. The file system (NTFS) also did not register...every entry for the drive was either blank or zeroed. My assumption is that the file tables were damaged/corrupted because the drive was being directly accessed when the power went out. After doing some research, I ran CHKDSK with whatever default options it runs with (I'm not sure what they are as I didn't see them displayed). Upon completion of CHKDSK, the drive registered with WinXP as a 1TB hard drive, with an accurately-reflected amount of available space. But CHKDSK also deleted about 16GB of files from their original directories, and changed them all into sequentially-named *.chk files. My question is how can CHKDSK be run in a situation like mine where the file tables needed to be restored, but without having CHKDSK delete any files from their original directories, even if they may be damaged/corrupt? I'd simply like to be able to run CHKDSK and have it restore the file tables, and repair bad sector damage, as it did, but not have it do anything else such as delete files and convert them to CHK files. Any ideas? Or is there a CHKDSK alternative that can perform the same functions without the file deletions?

  Read the article

• Recover files from corrupt filesystem

  - by Emile 81

  My situation: I have an older 80GB IDE internal hdd, with a few files on that I would like very much to recover: some word documents some latex documents (text files) and pictures (png, jpg, eps files) some other text documents and visual studio project files I had backed them (not the latex ones though) up using svn, but have not committed lately, and would loose a lot of work if I cant recover. the hdd seems to have lost its filesystem, i have no idea how it came about. I know it has/had 3 NTFS partitions, i know the files i want are on the second or third partition. I read http://superuser.com/questions/81877/recover-hard-disk-data Partition Find and Mount did not see all the partitions using intelligent scan TestDisk does (i think), I followed the step by step instructions here, but when I try to list the files it says: "Can't open filesystem, filesystem seems damaged." I'm not sure how to proceed here, as TestDisks wiki does not contain this error message afaik. I don't know if the hdd is gonna fail, or some prog has caused the filesystem to be corrupt, the hdd doesnt make a sound, so i guess that's good. I would like some guidance so I don't accidentally cause more damage. (eg. is it ok to let testdisk write the filesystem to disk? I'm pretty the partitions are listed ok, but not 100%)

  Read the article

• External Hard Drive Won't Mount - MAC OSX

  - by dtj

  I have a Western Digital hard drive that's about 4 or 5 years old. It's 500 GB, USB. I use it to backup my Mac every so often. I had it partitioned: 1 side for full backups, and the other side for general storage of music, installers, etc. I decided to get rid of the partition today and dump all the data. So I opened disk utility, and hit 'erase'. It started thinking and then disk utility crashed. After the crash, the hard drive won't mount, however disk utility still sees the drive, but not the individual volume within. I tried booting up Disk Warrior and no luck there either. It has the drive as an "unknown drive". When I hit rebuild, it goes through all it steps and then stops cause of this error: The drive "unknown" is severely damaged and DiskWarrior is unable to determine its case sensitivity What can I do at this point? There isn't any physical damage to the drive. Never been dropped or anything.

  Read the article

• Can VMWare Server 2.0 be useful in Production for easing backups?

  - by Keith Sirmons

  Howdy, Let's run this idea by the group here. I am thinking about using VMWare Server in production to host a 2008 Domain Controller with DHCP and DNS, a 2008 member server with WSUS, some virus software, and other "management" utilities a second 2008 member server with SQL, IIS, and File Shares for a medium business of 50-100 desktops. The reason I am leaning toward Server vs ESXi is for backup purposes. Using ESXi, if I want to backup the VM's, I would need a second server in the office with enough storage availability to hold a copy of the vmdks. I am wondering if putting this virtual environment on top of a basic 2008 server install will allow for easier backups to both tape and/or to offsite storage using JungleDisk. Can a snapshot be triggered easily via a scheduled job? I know this doesn't necessarily handle file level restores, but I want to make sure in a DR situation, we can restore production servers quickly. Does this concept hold water? Would a very minimum install of the 2008 Host remove too many resources from the actual production machines? This would be a new Dell 410 server with 12 GB ram and (6) 600 GB 15K in a RAID 6, Dual Intel Xeon 2.26GHz procs.

  Read the article

• Problem recreating BCD on Windows 7 64bit - The requested system device cannot be found

  - by Domchi

  NVIDIA drivers upgrade crashed my Windows 7 installation, so I'm working to undo the damage. What I can do: I can boot Windows install from the USB drive, and I can boot the Hiren's Boot CD. Although automated Windows repair fails, I can get to command prompt when I boot Windows install from USB drive, and I can see my drive and all my data. What I cannot do: I cannot boot into Windows - I get this message: Windows failed to start. A recent hardwware or software change might be the cause. To fix the problem: 1.insert windos cd and run a repair your computer option. File: /boot/bcd Status: 0xc000000f Info: an error occured while attempting to read the boot configuration data. It seems that something is wrong with my /Boot/BCD, so I'm trying to recreate it from scratch. I've tried all the methods detailed here (including Windows repair which fails), and I'm left with the last one (near the bottom of that page). When I type the following command as in the tutorial: bcdedit.exe /import c:\boot\bcd.temp ...it fails with the following error: The store import operation has failed. The requested system device cannot be found. Many Google results say that I must use diskpart to set my partition active, however it's already set as active. Also, when I try this: bcdedit /enum It fails with similar message: The boot configuration data store could not be opened. The requested system device cannot be found. Does anyone know what does that error message mean, and what is the requested system device? I'd like to avoid having to reinstall Windows since all the files on disk seem to be fine.

  Read the article

• Any ideas out there as to how the data can be recovered from an SSD?

  - by ben

  A friend had some form of catastrophic failure on an HP mini 1000, unbootable. Of course there was data that wasn't backed up. I've removed the SSD and hooked it up to a ZIF 40 enclosure but can not seem to get the drive to be recognized in Windows 7. In Disk Management it displays as present, but uninitialized. Attempting to initialize it presents an error Virtual Disk Manager - "The device is not ready". There is scant information on MIE (the custom OS), so I'm not even sure what kind of file system I'm dealing with. In any case, if the filesystem is indeed some flavor other than FAT or NTFS, is this error consistent with that? Are there any creative ideas out there as to how the data can be recovered? Update: Thanks for all the suggestions! I hadn't even considered running a live cd. Unfortunately no luck with Ubuntu (live cd) or explore2fs. The zif connection seems ok (color coded green led for proper connect, orange for not). The drive can't be initialized and therefore can't be formatted, so I guess there may be some real damage. Probably needs to head to a specialist. Thanks again for the feedback, much appreciated.

  Read the article

• Computer does not switch on after power outage

  - by cristian

  VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

  Read the article

• How to plug power/reset buttons from case to motherboard leads?

  - by MaxMackie

  I have a motherboard I salvaged from a pre-assembled computer. Except now I'm trying to use it in my own custom build. The problem is, this motherboard doesn't have any documentation because it was never meant to be used by consumers (as far as I know). I need to plug in my case's power/reset/hdd-light plugs into the motherboard. I usually check the documentation of the board to see which leads go to what connector, but I have no documentation for the board. So, as I see it, I have two options: I find the documentation (I've emailed gateway customer service, but I'm unsure of how successful I'll be with that). I simply test the leads one after the other (can this cause damage if plugged into the wrong leads?) However, there might even be a standard for which leads do what action (I'm not sure about this). For reference, my motherboard's SN/MD (?) is: H57M01G1-1.1-8EKS3H Does anyone have any idea if I can find documentation or find another way to be sure if my connections are correct?

  Read the article

• Firebird database corruption causes

  - by Rytis

  I am running several different Firebird versions (2.0, 2.1) on multiple entry level Windows-based servers with wildly varying hardware. The only matching thing between them is that they are running same home built application with the same database structure. Lately I've been seeing massive slowdowns on multiple servers. Turns out that database gets corrupted, so each time it breaks, I get to mend, backup and restore the database, and it all is fine for some time (1-2 weeks), and then it repeats once again. Thankfully, I haven't seen any data loss or damage... yet. The thing is that every such downtime results in lost productivity, and often quite some driving for me as some of the databases are in remote locations. I've been trying to find out what's causing the corruption, but I haven't been able to. The fact that it's running on different hardware hints that it should not be a hardware based problem. If we rule out hardware issues, I have a bad feeling that it's a bug in Firebird as I'm not doing anything fancy via SQL. Do you have any idea how to find out exactly what's causing the corruption and hopefully fix the problem?

  Read the article

• Intel Atom overheating in ASUS EEE Box 1501P

  - by Sergey L.

  I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

  Read the article

• Portable, battery-powered, wireless access point, ethernet adapter

  - by Jed

  I am in need of an adapter that will convert an ethernet port into a wireless access point. I have found a handful of devices, but I'm unable to find a device that is battery powered. Does a self-powered wireless access point even exist? The particular scenario that I will be using the device for is not your typical computer/PC scenario. For the curious, here's a bit of background on the problem I'm trying to solve: I make devices (controllers) that monitor water systems. Our controllers have a Webserver that serves out web pages so that users can configure the controller's settings. Typically, the user will use a cross-over cable to connect directly to the controller's ethernet port with their laptop to gain access to the controller's web pages. Now that tablets (devices that don't have an ethernet port - iPad, for example) are becoming more common, I need to find a device that will convert the controller's ethernet port into a wireless access point so that the user can connect to the controller's web pages via Wi-Fi or Bluetooth. It's worth noting that this wireless device that I'm looking for will NOT be permanently installed on the controller. It will be a portable device that the user will use on any of his controllers when he needs to make a connection to the controller. If you know of a device that will solve the scenario that I mention above, please share your info.

  Read the article

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Should windows services be created with custom users, or should I use one of LocalSystem/LocalServic

  - by Justin Dearing

  I'm asking the question in general for the average custom developed NT service or unix OSS daemon ported to windows with SCM support. However, at the moment my immediate concern is for mongodb. From my experience with UNIX I like all my services to run as different unprivileged users. The way this has translated to windows is as follows: Create a local (or domain if it has to talk to SQL server) windows user with a long random password (lately an ASCII85 encoded guid generated from a different machine). Set it to next expire and forbid it from changing its password. Remove that user from the "Users Group". Grant that user "Login as a Service" permission. Give it read permission to the folder where the app resides, and write permission to the logs and data files the applications use. Assign the user to the service. Troubleshoot until the service starts. My feeling is that the unprivileged users are less powerful than the 3 special service users. I also feel that by isolating which users run which services, I would limit collateral damage if a way to compromise one service was found.

  Read the article

• Can one really fry a monitor by setting the wrong HorizSync and VertRefresh?

  - by rumtscho

  I've encountered this problem on several different systems with several different monitors: a monitor functions perfectly under Windows. I install a Linux and the max resolution is at some impossibly low value, mostly 640x480, changing it in Xorg.conf doesn't work. The X.org log file then shows that the driver cannot determine the correct refresh rate for the monitor, so it ignores everything in Xorg.conf and just loads in some default minimalistic mode. Googling the problem leads to an easy solution: set the HorizSync and VertRefresh in Xorg.conf, and everything works. The problem seems to be a common one, and I've seen dozens of results recommending the solution. Each of them contains the warning that you should use the value ranges provided with the monitor. Because if you don't, and your video card sends a signal with the wrong refresh rate, this can damage your monitor. Of course, you don't have a user manual for your monitor any more. If you are lucky to find one on the attic or on the net, it doesn't contain any information about the supported refresh rate. So you just type in the value suggested in the solution description, which varies wildly depending on your source, and cross your fingers. You restart, and... ... you've set the wrong values. So the monitor shows a short message like "input signal out of range", and you do a hard restart, repair your Xorg.conf in recovery mode, and everything is fine, including your monitor. So does this warning reflect a real possibility, or is it just a geeky urban legend? Or is it something which used to happen in the past, before manufacturers started protecting the monitors against it? Is it technically possible with every monitor technology, or is it maybe something which can only happen to a CRT? If you think that it's true, why? Have you ever witnessed a monitor die from the wrong refresh config, or have you read of it in a reputable source?

  Read the article

• PC won't boot after hanging during Windows 8 automatic repair [closed]

  - by Mun

  I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

  Read the article

• Macbook Pro - 15" with i7 processor - Any problems with heat?

  - by webworm

  You may have already heard about the review done by the folks at PC Authority in Australia, where they had an i7 MacBook Pro that got up to 100 degrees Celsius during benchmarking. Here is the URL in case you have not read it. http://www.pcauthority.com.au/News/172791,macbook-pro-helps-core-i7-hit-100-degrees.aspx In any case, I was considering purchasing a 15" Macbook Pro with the i7 processor and the NVIDIA GeForce GT330M with 512 video memory. Having read how hot the computer got I started to become hesitant about purchasing. My main concern is long term damage to the computer due to excessive heat. I plan to use the MacBook Pro as a development machine where I will be running Windows 7 within VMWare Fusion or Virtual Box. Within the VM I will be running IIS, SQL Server, Visual Studio and SharePoint Server. Hence why I would like to have the power of the i7 processor. That is why I wanted to check with actually owners of the MacBooks with the i7 processor and see what their experiences have been. Have you noticed excessive heat? How does your Macbook handle process intensive apps over long periods of time? Thank you!

  Read the article

• IE9 apprears to be ignoring RewriteRule in htaccess file

  - by mouli

  I have a site that uses SEF URLs and htaccess RewriteRules to serve up the pages. This has worked fine for several years until the arrival of IE9. Now it appears that the links are not being rewritten and the site is dead in the water. I have tried different compatabilty modes, to no avail, and I've played with the Rewrite Rules over and over, tried different doctypes and a few other browser settings. I agree that it cannot in theory be a browser specific problem if the problem is with the htaccess file but this site works in IE8, firefox and chrome. I have run the rewriterule through a validator and it looks fine. Any ideas would be appreciated as I am running out of ideas. The site is www.marlboroughsounds.co.nz a sample link is http://www.marlboroughsounds.co.nz/walking/freedom-walk-queen-charlotte-track/4dfw and the rewrite rule thats not working looks like this: RewriteRule ^walking/.*/([a-z0-9_]*)/?$ /walking.php?act_code=$1 [L] The link fails and it serves up a browser 404 page, not even the custom 404 I have for the site. Any ideas would be much appreciated as I am stumped.

  Read the article

• My New Dell Workstation T-7500 gives electric shock

  - by Dan

  Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >