Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 300/534 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

• Ubuntu 12.04, can't find my home wifi network

  - by Anton

  I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

  Read the article

• How can I get wireless working on an HP-Mini 110-3150?

  - by jfmessier

  I just got an HP Mini 110-3150, and booting from an external hard disk with Ubuntu 10.10 works all fine, except that there is no wireless detected. I noticed that the Wireless indicator is red under Ubuntu, but is enabled under whatever Windows 7 I got on it. So, I understand that it may not get detected at all by Ubuntu at startup time, and there is no manual switch that I can simply slide to turn on/off. How can I get the Wireless device turned ON by default at startup time, and is there any special driver I need to install (proprietary or not) to get it working ? Merci :-) Update: When actually installing on the computer, as a new install, the NIC is not detected at first, but upon restarting, I get a notification of a closed driver available for the wireless. Once installed, updated and restarted, it works fine.

  Read the article

• Unable to mount 1TB USB external HDD - Error

  - by superbDeveloper

  Hi, I'm getting an error when I plug in my 1TB USB external HDD, the wierd thing about this is that it was working fine before and I've been using it for about a couple of months now. yesterday I compressed one of the folders which had about 120GB of data but the compression failed after an hour and I decided to unmount the drive and shut everything down. Today when I tried to plug in the drive I got the following error: Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdc, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so output of cat /proc/partitions below muzikayise@muzikayise-supercom:~$ sudo fdisk -l /dev/sdc Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x39dcba64 Device Boot Start End Blocks Id System please will someone kindly assist with this? thanks in advance,

  Read the article

• How can I install the latest version of libmtp?

  - by coversnail

  In the latest version of the libmtp library there are fixes for my Android device so I would like to install the latest version I'm just not sure how! I would assume that this would pushed into the official repositories at some point, so the smart advice would probably be just to wait, but I would like to know how to do this myself if anyone could tell me. I'm currently using Ubuntu 12.04 and am running libmtp-1.1.2, the latest version (libmtp-1.1.3) has recently been released and the tar.gz file is downloadable from this direct link: http://downloads.sourceforge.net/project/libmtp/libmtp/1.1.3/libmtp-1.1.3.tar.gz How do I install this? Thanks for any help.

  Read the article

• Fix Windows MBR using Ubuntu Live CD

  - by kova

  I'm trying to fix the MBR using Ubuntu live CD. I already have the ms-sys installed but from the threads that I saw, I'm not completely sure in which /dev I should execute the command: sudo ms-sys --mbr7 /dev/??? (is it mbr7 the correct option when using Windows 7?) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1f205b1f Device Boot Start End Blocks Id System /dev/sda1 * 38 38 0 0 Empty /dev/sda2 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda3 206848 155854847 77824000 7 HPFS/NTFS/exFAT /dev/sda4 155854848 625137663 234641408 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Why is /dev/sda1 empty? I'm trying to fix the MBR because I'm getting a black screen when trying to load the operating system.

  Read the article

• Android Emulator - Ubuntu 12.04

  - by Aneesh karthik C

  When I type in the command @emulator Andreud where 'Andreud' is the name of the emulator I created. It gives the following errors and a blank screen in which I should get android home screen, icons, etc shows up. PVRDRIInitPVR2D: PVR2D device index (0)Failed to load libGL.so error libGL.so: cannot open shared object file: No such file or directory Failed to load libGL.so error libGL.so: cannot open shared object file: No such file or directory As per a comment I tried installing ia32-libs aneesh@nb14:~$ sudo apt-get install ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done Package ia32-libs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'ia32-libs' has no installation candidate I want the home screen to appear. Any help is greatly appreciated.

  Read the article

• Seizing the Moment with Mobility

  - by Divya Malik

  Empowering people to work where they want to work is becoming more critical now with the consumerisation of technology. Employees are bringing their own devices to the workplace and expecting to be productive wherever they are. Sales people welcome the ability to run their critical business applications where they can be most effective which is typically on the road and when they are still with the customer. Oracle has invested many years of research in understanding customer's Mobile requirements. “The keys to building the best user experience were building in a lot of flexibility in ways to support sales, and being useful,” said Arin Bhowmick, Director, CRM, for the Applications UX team. “We did that by talking to and analyzing the needs of a lot of people in different roles.” The team studied real-life sales teams. “We wanted to study salespeople in context with their work,” Bhowmick said. “We studied all user types in the CRM world because we wanted to build a user interface and user experience that would cater to sales representatives, marketing managers, sales managers, and more. Not only did we do studies in our labs, but also we did studies in the field and in mobile environments because salespeople are always on the go.” Here is a recent post from Hernan Capdevila, Vice President, Oracle Fusion Apps which was featured on the Oracle Applications Blog.  Mobile devices are forcing a paradigm shift in the workplace – they’re changing the way businesses can do business and the type of cultures they can nurture. As our customers talk about their mobile needs, we hear them saying they want instant-on access to enterprise data so workers can be more effective at their jobs anywhere, anytime. They also are interested in being more cost effective from an IT point of view. The mobile revolution – with the idea of BYOD (bring your own device) – has added an interesting dynamic because previously IT was driving the employee device strategy and ecosystem. That's been turned on its head with the consumerization of IT. Now employees are figuring out how to use their personal devices for work purposes and IT has to figure out how to adapt. Blurring the Lines between Work and Personal Life My vision of where businesses will be five years from now is that our work lives and personal lives will be more interwoven together. In turn, enterprises will have to determine how to make employees’ work lives fit more into the fabric of their personal lives. And personal devices like smartphones are going to drive significant business value because they let us accomplish things very incrementally. I can be sitting on a train or in a taxi and be productive. At the end of any meeting, I can capture ideas and tasks or follow up with people in real time. Mobile devices enable this notion of seizing the moment – capitalizing on opportunities that might otherwise have slipped away because we're not connected. For the industry shapers out there, this is game changing. The lean and agile workforce is definitely the future. This notion of the board sitting down with the executive team to lay out strategic objectives for a three- to five-year plan, bringing in HR to determine how they're going to staff the strategic activities, kicking off the execution, and then revisiting the plan in three to five years to create another three- to five-year plan is yesterday's model. Businesses that continue to approach innovating in that way are in the dinosaur age. Today it's about incremental planning and incremental execution, which requires a lot of cohesion and synthesis within the workforce. There needs to be this interweaving notion within the workforce about how ideas cascade down, how people engage, how they stay connected, and how insights are shared. How to Survive and Thrive in Today’s Marketplace The notion of Facebook isn’t new. We lived it pre-Internet days with America Online and Prodigy – Facebook is just the renaissance of these services in a more viral and pervasive way. And given the trajectory of the consumerization of IT with people bringing their personal tooling to work, the enterprise has no option but to adapt. The sooner that businesses realize this from a top-down point of view the sooner that they will be able to really drive significant innovation and adapt to the marketplace. There are a small number of companies right now (I think it's closer to 20% rather than 80%, but the number is expanding) that are able to really innovate in this incremental marketplace. So from a competitive point of view, there's no choice but to be social and stay connected. By far the majority of users on Facebook and LinkedIn are mobile users – people on iPhones, smartphones, Android phones, and tablets. It's not the couch people, right? It's the on-the-go people – those people at the coffee shops. Usually when you're sitting at your desk on a big desktop computer, typically you have better things to do than to be on Facebook. This is a topic I'm extremely passionate about because I think mobile devices are game changing. Mobility delivers significant value to businesses – it also brings dramatic simplification from a functional point of view and transforms our work life experience. Hernan Capdevila Vice President, Oracle Applications Development

  Read the article

• How to recover data from NTFS partition that was made into a Swap partition?

  - by Raghav Mehta

  I have extremely important stuff on my windows partition which during the ubuntu 10.10 installation,when it said that I should create something called swap space, I selected it to be a swap space (without even knowing what it actually meant) The Grub2 doesn't show up so I don't get a choice to boot Ubuntu or Windows. I don't get my windows partition as a removable device in Ubuntu either. When I go to disk utility and select the sda2 (i.e.. my windows partition) and click edit partition and select HPFS/NTFS for the type and tick bootable and click OK the small processing sign keep on rotating on the bottom right of the sda2 in the chart and after about 10 to 15 minutes it gives an unknown error and thus, I am still unable to use my windows. I am even worse than a beginner who doesn't know a thing about Ubuntu so please be patient and help me out.

  Read the article

• IDirect3DDevice9Ex and D3DPOOL_MANAGED?

  - by bluescrn

  So I wanted to switch to IDirect3DDevice9Ex, purely for the SetFrameLatency function, as fullscreen vsynced D3D seemed to produce noticable input lag. But then it tells me 'ha ha ha! now you can't use D3DPOOL_MANAGED!': Direct3D9: (ERROR) :D3DPOOL_MANAGED is not valid with IDirect3DDevice9Ex Is this really as unpleasant as it looks (when you're relying quite heavily on managed resources) - or is there a simple solution? If it really does mean manual management of everything (reloading all static textures, VBs, and IBs on a device reset), is it worth the hassle, will IDirect3DDevice9Ex bring enough benefit to make it worth writing a new resource manager? Starting to think I must be doing something wrong, due to this: Direct3D9: (ERROR) :Lock is not supported for textures allocated with POOL_DEFAULT unless they are marked D3DUSAGE_DYNAMIC. So if I put my (static) textures in POOL_DEFAULT, they need flagging as D3DUSAGE_DYNAMIC, just because I lock them once to load the data in?

  Read the article

• Is it possible to power up ports on a USB hub from Ubuntu?

  - by James Henstridge

  I have a D-Link DUB-H7 powered USB 2.0 hub connected to my computer. Occasionally when I reboot the system, I've noticed that some of the ports on the hub get powered down: the green light next to the port is turned off, and the device attached to that port is not visible to lsusb or similar commands. Devices attached to the other ports on the hub function as normal. I am able to restore the ports by disconnecting power to the hub temporarily (from the computer, AC adapter and any devices that might provide any power such as my phone), but this is a bit of a hassle. It seems like something that might be related to power management, so is there some way you can tell the USB hub to power up through software?

  Read the article

• When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

  - by Jessica K

  I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• D3D9 Alpha Blending on the surfaces

  - by Indeera

  I have a surface (OffScreenPlain or RenderTarget with D3DFMT_A8R8G8B8) which I copy pixels (ARGB) to, from a third party function. Before pixel copying, Bits are accessed by LockRect. This surface is then StretchRect to the Backbuffer which is (D3DFMT_A8R8G8B8). Surface and Backbuffer are different dimensions. Filtering is set to D3DTEXF_NONE. Just after creating the d3d device I've set following RenderState settings D3DRS_ALPHABLENDENABLE -> TRUE D3DRS_BLENDOP -> D3DBLENDOP_ADD D3DRS_SRCBLEND -> D3DBLEND_SRCALPHA D3DRS_DESTBLEND -> D3DBLEND_INVSRCALPHA But I see no alpha blending happening. I've verified that alpha is specified in pixels. I've done a simple test by creating a vertex buffer and drawing a triangle (DrawPrimitive) which displays with alpha blending. In this test surface was StretchRect first and then DrawPrimitive, and the surface content displays without alpha blending and the triangle displays with alpha blending. What am I missing here? Thanks

  Read the article

• How do I prevent useless content load on the page in responsive design?

  - by Ícaro Leandro

  In responsive design, elements are hidden in the page with @media queries and display: none in CSS. Ok. In my design however browsers that have less than 800px in width should avoid loading some content at all. When accessed with on a device with more than 800px of screen, the page loads fully. In mobile devices or even on desktop with less than 800px of width some content is hidden. I want to make the page load faster for low-resolution devices and avoid loading chunks of content that the user will never see. How can I go about this?

  Read the article

• Balancing agressive invites

  - by Nils Munch

  I am designing a trading card game for mobiles, with the possibility to add cards to your collection using Gems, aquired through victories and inapp purchases. I am thinking to increase the spread of the game with a tracking system on game invites, enabling the user to invite a friend to play the game. If the friend doesn't own the game client (which is free) he will be offered to download it. If he joins the game, the original player earns X amount of gems as an reward. There can only be one player per mobile device, which should rule out some harvesting. My question is, how do you think the structure of this would be recieved ? All invites are mail based, unless the player already exists in the game world (then he gets a ingame invitation.) I have set a flood filter, so a player can only invite a friend (without the client installed) once a month.

  Read the article

• Grub messed up on dual boot machine - can't boot live usb

  - by Sam

  I have a laptop on which I had Win 7 and Ubuntu 12.04 installed. The hdd has two partitions (one primary and one extended). Grub wasn't loaing initially so I ran the boot disk repair tool which seemed to sort it out. However, I mistakenly removed python (long story) from the Ubuntu OS and this obviously messed up Ubuntu a lot. So I decided to reintsall both Win7 and Ubuntu 12.04 in an attempt to get things back fresh. Win 7 went fine, but now when I try and use the Live USB to install Ubuntu I get: error: no such device: grub rescue I guess grub is still there despite the Win 7 reinstall and it can't find the partition for Ubuntu (which I deleted prior to the fresh install). I have tried fixmbr in windows console and the boot-repair-disk utility, but no joy. I cannot boot the live usb so no access to linux. A real mess. Any suggestions from the community?

  Read the article

• Where can I find "magic numbers" for classic game play mechanics?

  - by MrDatabase

  I'd like to find some "magic numbers" for the classic helicopter game. For example the numbers that determine how fast the helicopter accelerates up and down. Also perhaps the "randomness" of the obstacles (uniformly distributed? Gaussian?). Where can I find these numbers? p.s. I don't care about the particular platform... Flash on the desktop browser is just as good as some implementation on a mobile device.

  Read the article

• Cannot mount Android phone and sync with Banshee

  - by Brett Alton

  I can't get my LG Optimus One to sync with Banshee. I read somewhere that the root needs to have an empty file called '.is_audio_player'. I did that and it still doesn't mount. I ran dmesg however and it appears that the card is unmounting before I even have a change to run Banshee. [ 7250.321359] usb 1-1.4: new high speed USB device using ehci_hcd and address 10 [ 7250.444795] scsi12 : usb-storage 1-1.4:1.0 [ 7251.567946] scsi 12:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 7251.568839] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 7252.232433] sd 12:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 7252.233299] sd 12:0:0:0: [sdc] Write Protect is off [ 7252.233306] sd 12:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 7252.233309] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235658] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235666] sdc: sdc1 [ 7252.239132] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.239140] sd 12:0:0:0: [sdc] Attached SCSI removable disk [ 7272.573437] usb 1-1.4: USB disconnect, address 10 Suggestions?

  Read the article

• How to set up bridged networking in Xen?

  - by Joe Carr

  I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

  Read the article

• How can I create a symlink to the location that Ubuntu 10.10 mounts a CD?

  - by Michael Curran

  In Ubuntu 10.10, when I insert a CD or DVD into my optical drive, the system mounts the CD in a folder called /media/XYZ where XYZ is the disk's label. This has cause problems with Wine, as in order for an application to verify that an application's CD is present, Wine uses a symlinks to point to a mounted CD's folder. In this case, that folder must be /media/XYZ, but when using a different application, the folder would be different. I would like to know if there is a way to create a symlink that will always point to the mounted folder from a given /dev/cdrom* device, or how to force the system to always mount CDs to the same address (i.e. /media/cdrom).

  Read the article

• New Survey Findings: Application Intelligence and Connected Devices - How do you Harness the Value

  - by Yolande Poirier

  Oracle and Beecham have recently conducted a market survey on use of Connected Devices for M2M & Internet of Things (IoT) applications and new trends. This first session in our webinar series addresses intelligence in connected devices. Join Peter Utzschneider of Oracle and Robin Duke-Woolley of Beecham Research as they discuss: What are the key business drivers of your connected devices program? To what extent do you expect the intelligence required for M2M & IoT applications to change? Would these changes occur at the network edge, at the data center, or both? What are the impacts of these changes on ISV’s and device manufacturers? What are the opportunities for other M2M & IoT players?

  Read the article

• How to mount read-only filesystem as read-write?

  - by Eric

  this is my problem. I have a USB drive which somehow was set as read-only. I want to set it as read write then format it. sudo chown -R eric /dev/sdb Seems to go through, but when I view the drive in Nautilius it says Error mounting: mount: block device /dev/sdb1 is write-protected, mounting read-only mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful inf.o is found in syslog - try dmesg | tail or so. Thanks in advance!

  Read the article

• Using RSYNC to Replicate Synology NAS DS710+ to Windows 7 Hard Drive

  Learn how to use a local backup drive on your windows 7 system to replicate the data on any or all of your directories on your Synology NAS (Network Hard Drive Device) DS710+.  This post will... This site is a resource for asp.net web programming. It has examples by Peter Kellner of techniques for high performance programming...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Can Simple & Modern UX Be Sexy? Fusion Apps in 100% #Oracle #ADF Shows How #usableapps #UX #futureofwork

  - by ultan o'broin

  YES! I love the sheer cut-to-the-chase instant beauty and usefulness of my Clear app on iOS. Dropbox really does simplify my ICT world, if not my life. I use those apps every day: on mobile, desktop or web. Clear app Dropbox web UI In the enterprise apps world, you'll love what Oracle Applications User Experience team is doing with our roadmap to simple and modern user experience with Oracle Fusion Applications built with 100% Oracle Application Development Framework (ADF). Simple and modern. A compelling and easily personalized UX for Fusion Apps on your device of choice. Beautiful. Simplicity, it's all part of the BYOD and COIT phenomenon that enterprises need to embrace rather than tolerate or ignore. So, introduce yourself to the new face of Oracle Fusion Applications. More on the Voice of User Experience for Oracle Applications blog.

  Read the article

• Part of the launcher has been cut off, Ubuntu 12.04

  - by Tim

  After a hard drive failure on my iMac, I replaced it and installed Ubuntu. So far, I am finding it very easy to use, however there is one problem which is making it much harder. The bottom of the launcher is missing - it is 'covered' by the desktop background. This means that I cant see the trash, or bottom few icons. Even if I scroll, it doesn't show it. Any help is very much appreciated. If you send a message to [email protected], with the subject "launcher photo", I will send you an email with the photo of the missing part attached. Currently, my only fix is to enable and then disable the extra screen it thinks is there - called unknown device

  Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >