Search Results

Search found 7872 results on 315 pages for 'unsupported hardware'.

Page 300/315 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

  • Sound issues after trying everything

    - by Lerp
    I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

    Read the article

  • Unable to keep the connecting using a wireless bridge

    - by dan
    I am running Ubuntu 12.04 on a dell inspiron desktop (core 2 duo) and am using wicd to manage my network/wifi. I've found that the WiFi card in the machine has trouble staying connected to my router (I believe this is a function of distance between the two), so I've taken an old Belkin F5d7231 wireless router and installed dd-wrt on it to use as a wireless bridge hoping that it will have better reception. I think everything up through the wireless bridge is working OK since I have no problems accessing the internet through it with my MacBook. The problem arises when I try to hook the ubuntu machine up to the wireless bridge. It will connect for a few minutes, but it will quickly disconnect without clear triggering event; it may be more likely to disconnect if there is a heavy traffic load going over it (could be something as simple as "cat big_text_file" in an ssh session). I've tried switching from dhclient to dhcpcd without much improvement. Here is the output from the syslog when it connects: Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: exiting Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: exiting Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:10:08 Chicabuntu kernel: [15184.976127] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.010805] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: exiting Jun 30 17:10:08 Chicabuntu kernel: [15185.180156] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.212785] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:10 Chicabuntu kernel: [15187.027445] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:10:10 Chicabuntu kernel: [15187.027452] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:10:10 Chicabuntu kernel: [15187.028300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: dhcpcd 3.2.3 starting Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: hardware address = 00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: DUID = 00:01:00:01:17:81:85:79:00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: broadcasting for a lease Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:10:20 Chicabuntu kernel: [15197.568016] eth0: no IPv6 routers present Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: offered 192.168.1.111 from 192.168.1.254 Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: checking 192.168.1.111 is available on attached networks Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: leased 192.168.1.111 for 86400 seconds Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding IP address 192.168.1.111/24 Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding default route via 192.168.1.254 metric 0 Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: exiting Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv4 for mDNS. Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Registering new address record for 192.168.1.111 on eth0.IPv4. Jun 30 17:10:30 Chicabuntu dhcpcd.sh: interface eth0 has been configured with new IP=192.168.1.111 Jun 30 17:10:39 Chicabuntu ntpdate[28439]: adjust time server 91.189.94.4 offset 0.001915 sec And here is the syslog from when it shuts down the connection without reason: Jun 30 17:12:15 Chicabuntu kernel: [15312.575455] tg3 0000:3f:00.0: eth0: Link is down Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: sending signal 1 to pid 28361 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: received SIGHUP, releasing lease Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: exiting Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for 192.168.1.111 on eth0. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv4 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing default route via 192.168.1.254 metric 0 Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: No such process Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing IP address 192.168.1.111/24 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: Cannot assign requested address Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: exiting Jun 30 17:12:16 Chicabuntu dhcpcd.sh: interface eth0 has been brought down Jun 30 17:12:17 Chicabuntu kernel: [15313.612141] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.644703] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: exiting Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: exiting Jun 30 17:12:17 Chicabuntu kernel: [15313.912147] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.944746] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:18 Chicabuntu kernel: [15315.592569] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:12:18 Chicabuntu kernel: [15315.592576] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:12:18 Chicabuntu kernel: [15315.593399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:12:29 Chicabuntu kernel: [15325.680019] eth0: no IPv6 routers present If this isn't useful, I can also post the wicd log, but that is kind of long. If anyone could help me I would be eternally grateful.

    Read the article

  • Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

    - by Arkadius
    I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

    Read the article

  • The Linux powered LAN Gaming House

    - by sachinghalot
    LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

    Read the article

  • Coping with infrastructure upgrades

    - by Fatherjack
    A common topic for questions on SQL Server forums is how to plan and implement upgrades to SQL Server. Moving from old to new hardware or moving from one version of SQL Server to another. There are other circumstances where upgrades of other systems affect SQL Server DBAs. For example, where I work at the moment there is an Microsoft Exchange (email) server upgrade in progress. It it being handled by a different team so I’m not wholly sure on the details but we are in a situation where there are currently 2 Exchange email servers – the old one and the new one. Users mail boxes are being transferred in a planned process but as we approach the old server being turned off we have to also make sure that our SQL Servers get updated to use the new SMTP server for all of the SQL Agent notifications, SSIS packages etc. My servers have a number of profiles so that various jobs can send emails on behalf of various departments and different systems. This means there are lots of places that the old server name needs to be replaced by the new one. Anyone who has set up DBMail and enjoyed the click-tastic odyssey of screens to create Profiles and Accounts and so on and so forth ought to seek some professional help in my opinion. It’s a nightmare of back and forth settings changes and it stinks. I wasn’t looking forward to heading into this mess of a UI and changing the old Exchange server name for the new one on all my SQL Instances for all of the accounts I have set up. So I did what any Englishmen with a shed would do, I decided to take it apart and see if I can fix it another way. I took a guess that we are going to be working in MSDB and Books OnLine was remarkably helpful and amongst a lot of information told me about a couple of procedures that can be used to interrogate DBMail settings. USE [msdb] -- It's where all the good stuff is kept GO EXEC dbo.sysmail_help_profile_sp; EXEC dbo.sysmail_help_account_sp; Both of these procedures take optional parameters with the same name – ID and Name. If you provide an ID or a name then the results you get back are for that specific Profile or Account. Otherwise you get details of all Profiles and Accounts on the server you are connected to. As you can see (click for a bigger image), the Account has the SMTP server information in the servername column. We want to change that value to NewSMTP.Contoso.com. Now it appears that the procedure we are looking at gets it’s data from the sysmail_account and sysmail_server tables, you can get the results the stored procedure provides if you run the code below. SELECT [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [last_mod_datetime] , [last_mod_user] FROM dbo.sysmail_account AS sa; SELECT [account_id] , [servertype] , [servername] , [port] , [username] , [credential_id] , [use_default_credentials] , [enable_ssl] , [flags] , [last_mod_datetime] , [last_mod_user] , [timeout] FROM dbo.sysmail_server AS sms Now, we have no real idea how these tables are linked and whether making an update direct to one or other of them is going to do what we want or whether it will entirely cripple our ability to send email from SQL Server so we wont touch those tables with any UPDATE TSQL. So, back to Books OnLine then and we find sysmail_update_account_sp. It’s exactly what we need. The examples in BOL take the form (as below) of having every parameter explicitly defined. Not wanting to totally obliterate the existing values by not passing values in all of the parameters I set to writing some code to gather the existing data from the tables and re-write the SMTP server name and then execute the resulting TSQL. IF OBJECT_ID('tempdb..#sysmailprofiles') IS NOT NULL DROP TABLE #sysmailprofiles GO CREATE TABLE #sysmailprofiles ( account_id INT , [name] VARCHAR(50) , [description] VARCHAR(500) , email_address VARCHAR(500) , display_name VARCHAR(500) , replyto_address VARCHAR(500) , servertype VARCHAR(10) , servername VARCHAR(100) , port INT , username VARCHAR(100) , use_default_credentials VARCHAR(1) , ENABLE_ssl VARCHAR(1) ) INSERT [#sysmailprofiles] ( [account_id] , [name] , [description] , [email_address] , [display_name] , [replyto_address] , [servertype] , [servername] , [port] , [username] , [use_default_credentials] , [ENABLE_ssl] ) EXEC [dbo].[sysmail_help_account_sp] DECLARE @TSQL NVARCHAR(1000) SELECT TOP 1 @TSQL = 'EXEC [dbo].[sysmail_update_account_sp] @account_id = ' + CAST([s].[account_id] AS VARCHAR(20)) + ', @account_name = ''' + [s].[name] + '''' + ', @email_address = N''' + [s].[email_address] + '''' + ', @display_name = N''' + [s].[display_name] + '''' + ', @replyto_address = N''' + s.replyto_address + '''' + ', @description = N''' + [s].[description] + '''' + ', @mailserver_name = ''NEWSMTP.contoso.com''' + +', @mailserver_type = ' + [s].[servertype] + ', @port = ' + CAST([s].[port] AS VARCHAR(20)) + ', @username = ' + COALESCE([s].[username], '''''') + ', @use_default_credentials =' + CAST(s.[use_default_credentials] AS VARCHAR(1)) + ', @enable_ssl =' + [s].[ENABLE_ssl] FROM [#sysmailprofiles] AS s WHERE [s].[servername] = 'SMTP.Contoso.com' SELECT @tsql EXEC [sys].[sp_executesql] @tsql This worked well for me and testing the email function EXEC dbo.sp_send_dbmail afterwards showed that the settings were indeed using our new Exchange server. It was only later in writing this blog that I tried running the sysmail_update_account_sp procedure with only the SMTP server name parameter value specified. Despite what Books OnLine might intimate, you can do this and only the values for parameters specified get changed. If a parameter is not specified in the execution of the procedure then the values remain unchanged. This renders most of the above script unnecessary as I could have simply specified the account_id that I want to amend and the new value for the parameter I want to update. EXEC sysmail_update_account_sp @account_id = 1, @mailserver_name = 'NEWSMTP.Contoso.com' This wasn’t going to be the main reason for this post, it was meant to describe how to capture values from a stored procedure and use them in dynamic TSQL but instead we are here and (re)learning the fact that Books Online is a little flawed in places. It is a fantastic resource for anyone working with SQL Server but the reader must adopt an enquiring frame of mind and use a little curiosity to try simple variations on examples to fully understand the code you are working with. I think the author(s) of this part of Books OnLine missed an opportunity to include a third example that had fewer than all parameters specified to give a lead to this method existing.

    Read the article

  • CD/DVD drive not mounted when inserted with Disc of any kind

    - by Cisco Sán
    I just noticed that if a insert a CD or a DVD of any kind, the Drive will start spinning but it will not show the mounted disc. Before it used to ask me what to do with the media inserted. Now it doesn't even do that. I ran in the terminal this code: eject -n and it displays this: " eject: device is `/dev/sr0'" what can I do to get the functionality back on my drive. also ran this command: sudo mount -o ro,unhide,uid=1000 /dev/cdrom /mnt/cdrom but in return i get this: " mount: mount point /mnt/cdrom does not exist" Running Ubuntu 11.10 HERE IS THE HISTORY UNTIL NOW thanks Waltinator: I ran the 'dmesg' but don't know what I'm looking for. Im a newbie on this. The same thing with the 'ls -rlt /var/log' command. Should I create the directory for the mount? at this point really don't know what to do. – Cisco Sán 7 hours ago Here are 3 lines from my dmesg after I successfully inserted a CD: [ 4804.416018] wlan0: no IPv6 routers present [ 8214.125450] ISdit ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8214.136556] ISO 9660 Extensions: RRIP_1991A The first line is a previous event, my wireless going online. The next 2 lines are a good result. The number in square brackets is "seconds since boot", the rest of the line is usually helpful. And no, you should NOT create the mount point. Let's try to get the automatic mounting to work. – waltinator 7 hours ago ok this are my last 3 lines on the 'dmesg' [ 18.130819] init: plymouth-stop pre-start process (1396) terminated with status 1 [ 28.780011] wlan0: no IPv6 routers present [ 505.632119] CE: hpet increased min_delta_ns to 20113 nsec – Cisco Sán 6 hours ago It looks like your CD/DVD drive is not connected to the data bus, and not causing an interrupt when you insert a platter. – waltinator 6 hours ago Try dmesg | grep -A8 CD-ROM which should show you what the system thought was available when it came up. – waltinator 6 hours ago here is my printout [0.774351] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T40N A100 PQ: 0 ANSI: 5 [0.778117] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [0.778122] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.778282] sr 0:0:0:0: Attached scsi CD-ROM sr0 [0.778340] sr 0:0:0:0: Attached scsi generic sg0 type 5 [0.780416] Freeing unused kernel memory: 984k freed [0.780732] Write protecting the kernel read-only data: 10240k [0.780986] Freeing unused kernel memory: 20k freed [0.786331] Freeing unused kernel memory: 1400k freed [0.804912] udevd[90]: starting version 173 [0.874178] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [0.874208] r8169 0000:02:00.0: PCI INT A - GSI 16 (level, low) - IRQ 16 OK, your system sees the drive. Can you open and close the tray with eject and eject -t? Run udevadm monitor while you insert a CD (type ^C when done) and see if you get "change" and "add" messages. – waltinator 6 hours ago ok, "eject" works perfectly "eject -t" does nothing. this is the message for "udevadm monitor": KERNEL[13771.009267] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0 (block) UDEV [13773.878887] change /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0 /block/sr0 (block) – Cisco Sán 6 hours ago sudo hwinfo --cdrom (the hwinfo package is installable through Software Center) describes my CD-ROM, try it. – waltinator 4 hours ago My read out from the "sudo hwinfo --cdrom" are the following: hal.1: read hal dataprocess 2753: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 280. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 22: SCSI 00.0: 10602 CD-ROM (DVD) [Created at block.247] Unique ID: KD9E.JgkxTS4hgl2 Parent ID: 3p2J.gdUMCD83e+E SysFS ID: /class/block/sr0 SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 Hardware Class: cdrom Model: "HL-DT-ST DVD+-RW GSA-T40N" Vendor: "HL-DT-ST" Device: "DVD+-RW GSA-T40N" Revision: "A100" Driver: "ata_piix", "sr" Driver Modules: "ata_piix" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/scd0, /dev/disk/by-id/ata-HL-DT-ST_DVD+_-RW_GSA-T40N_K048BJ74257, /dev/disk/by-path/pci-0000:00:1f.1-scsi-0:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Features: DVD Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (IDE interface) Drive Speed: 31 Volume ID: "Movie" Publisher: "INTERVIDEO" Creation date: "20050424162207000" Thanks for the help. To Castro, hope this is what you meant and sorry for the comments..

    Read the article

  • Computer Networks UNISA - Chap 14 &ndash; Insuring Integrity &amp; Availability

    - by MarkPearl
    After reading this section you should be able to Identify the characteristics of a network that keep data safe from loss or damage Protect an enterprise-wide network from viruses Explain network and system level fault tolerance techniques Discuss issues related to network backup and recovery strategies Describe the components of a useful disaster recovery plan and the options for disaster contingencies What are integrity and availability? Integrity – the soundness of a networks programs, data, services, devices, and connections Availability – How consistently and reliably a file or system can be accessed by authorized personnel A number of phenomena can compromise both integrity and availability including… security breaches natural disasters malicious intruders power flaws human error users etc Although you cannot predict every type of vulnerability, you can take measures to guard against the most damaging events. The following are some guidelines… Allow only network administrators to create or modify NOS and application system users. Monitor the network for unauthorized access or changes Record authorized system changes in a change management system’ Install redundant components Perform regular health checks on the network Check system performance, error logs, and the system log book regularly Keep backups Implement and enforce security and disaster recovery policies These are just some of the basics… Malware Malware refers to any program or piece of code designed to intrude upon or harm a system or its resources. Types of Malware… Boot sector viruses Macro viruses File infector viruses Worms Trojan Horse Network Viruses Bots Malware characteristics Some common characteristics of Malware include… Encryption Stealth Polymorphism Time dependence Malware Protection There are various tools available to protect you from malware called anti-malware software. These monitor your system for indications that a program is performing potential malware operations. A number of techniques are used to detect malware including… Signature Scanning Integrity Checking Monitoring unexpected file changes or virus like behaviours It is important to decide where anti-malware tools will be installed and find a balance between performance and protection. There are several general purpose malware policies that can be implemented to protect your network including… Every compute in an organization should be equipped with malware detection and cleaning software that regularly runs Users should not be allowed to alter or disable the anti-malware software Users should know what to do in case the anti-malware program detects a malware virus Users should be prohibited from installing any unauthorized software on their systems System wide alerts should be issued to network users notifying them if a serious malware virus has been detected. Fault Tolerance Besides guarding against malware, another key factor in maintaining the availability and integrity of data is fault tolerance. Fault tolerance is the ability for a system to continue performing despite an unexpected hardware or software malfunction. Fault tolerance can be realized in varying degrees, the optimal level of fault tolerance for a system depends on how critical its services and files are to productivity. Generally the more fault tolerant the system, the more expensive it is. The following describe some of the areas that need to be considered for fault tolerance. Environment (Temperature and humidity) Power Topology and Connectivity Servers Storage Power Typical power flaws include Surges – a brief increase in voltage due to lightening strikes, solar flares or some idiot at City Power Noise – Fluctuation in voltage levels caused by other devices on the network or electromagnetic interference Brownout – A sag in voltage for just a moment Blackout – A complete power loss The are various alternate power sources to consider including UPS’s and Generators. UPS’s are found in two categories… Standby UPS – provides continuous power when mains goes down (brief period of switching over) Online UPS – is online all the time and the device receives power from the UPS all the time (the UPS is charged continuously) Servers There are various techniques for fault tolerance with servers. Server mirroring is an option where one device or component duplicates the activities of another. It is generally an expensive process. Clustering is a fault tolerance technique that links multiple servers together to appear as a single server. They share processing and storage responsibilities and if one unit in the cluster goes down, another unit can be brought in to replace it. Storage There are various techniques available including the following… RAID Arrays NAS (Storage (Network Attached Storage) SANs (Storage Area Networks) Data Backup A backup is a copy of data or program files created for archiving or safekeeping. Many different options for backups exist with various media including… These vary in cost and speed. Optical Media Tape Backup External Disk Drives Network Backups Backup Strategy After selecting the appropriate tool for performing your servers backup, devise a backup strategy to guide you through performing reliable backups that provide maximum data protection. Questions that should be answered include… What data must be backed up At what time of day or night will the backups occur How will you verify the accuracy of the backups Where and for how long will backup media be stored Who will take responsibility for ensuring that backups occurred How long will you save backups Where will backup and recovery documentation be stored Different backup methods provide varying levels of certainty and corresponding labour cost. There are also different ways to determine which files should be backed up including… Full backup – all data on all servers is copied to storage media Incremental backup – Only data that has changed since the last full or incremental backup is copied to a storage medium Differential backup – Only data that has changed since the last backup is coped to a storage medium Disaster Recovery Disaster recovery is the process of restoring your critical functionality and data after an enterprise wide outage has occurred. A disaster recovery plan is for extreme scenarios (i.e. fire, line fault, etc). A cold site is a place were the computers, devices, and connectivity necessary to rebuild a network exist but they are not appropriately configured. A warm site is a place where the computers, devices, and connectivity necessary to rebuild a network exists with some appropriately configured devices. A hot site is a place where the computers, devices, and connectivity necessary to rebuild a network exists and all are appropriately configured.

    Read the article

  • SPARC T4-4 Delivers World Record Performance on Oracle OLAP Perf Version 2 Benchmark

    - by Brian
    Oracle's SPARC T4-4 server delivered world record performance with subsecond response time on the Oracle OLAP Perf Version 2 benchmark using Oracle Database 11g Release 2 running on Oracle Solaris 11. The SPARC T4-4 server achieved throughput of 430,000 cube-queries/hour with an average response time of 0.85 seconds and the median response time of 0.43 seconds. This was achieved by using only 60% of the available CPU resources leaving plenty of headroom for future growth. The SPARC T4-4 server operated on an Oracle OLAP cube with a 4 billion row fact table of sales data containing 4 dimensions. This represents as many as 90 quintillion aggregate rows (90 followed by 18 zeros). Performance Landscape Oracle OLAP Perf Version 2 Benchmark 4 Billion Fact Table Rows System Queries/hour Users* Response Time (sec) Average Median SPARC T4-4 430,000 7,300 0.85 0.43 * Users - the supported number of users with a given think time of 60 seconds Configuration Summary and Results Hardware Configuration: SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 1 TB memory Data Storage 1 x Sun Fire X4275 (using COMSTAR) 2 x Sun Storage F5100 Flash Array (each with 80 FMODs) Redo Storage 1 x Sun Fire X4275 (using COMSTAR with 8 HDD) Software Configuration: Oracle Solaris 11 11/11 Oracle Database 11g Release 2 (11.2.0.3) with Oracle OLAP option Benchmark Description The Oracle OLAP Perf Version 2 benchmark is a workload designed to demonstrate and stress the Oracle OLAP product's core features of fast query, fast update, and rich calculations on a multi-dimensional model to support enhanced Data Warehousing. The bulk of the benchmark entails running a number of concurrent users, each issuing typical multidimensional queries against an Oracle OLAP cube consisting of a number of years of sales data with fully pre-computed aggregations. The cube has four dimensions: time, product, customer, and channel. Each query user issues approximately 150 different queries. One query chain may ask for total sales in a particular region (e.g South America) for a particular time period (e.g. Q4 of 2010) followed by additional queries which drill down into sales for individual countries (e.g. Chile, Peru, etc.) with further queries drilling down into individual stores, etc. Another query chain may ask for yearly comparisons of total sales for some product category (e.g. major household appliances) and then issue further queries drilling down into particular products (e.g. refrigerators, stoves. etc.), particular regions, particular customers, etc. Results from version 2 of the benchmark are not comparable with version 1. The primary difference is the type of queries along with the query mix. Key Points and Best Practices Since typical BI users are often likely to issue similar queries, with different constants in the where clauses, setting the init.ora prameter "cursor_sharing" to "force" will provide for additional query throughput and a larger number of potential users. Except for this setting, together with making full use of available memory, out of the box performance for the OLAP Perf workload should provide results similar to what is reported here. For a given number of query users with zero think time, the main measured metrics are the average query response time, the median query response time, and the query throughput. A derived metric is the maximum number of users the system can support achieving the measured response time assuming some non-zero think time. The calculation of the maximum number of users follows from the well-known response-time law N = (rt + tt) * tp where rt is the average response time, tt is the think time and tp is the measured throughput. Setting tt to 60 seconds, rt to 0.85 seconds and tp to 119.44 queries/sec (430,000 queries/hour), the above formula shows that the T4-4 server will support 7,300 concurrent users with a think time of 60 seconds and an average response time of 0.85 seconds. For more information see chapter 3 from the book "Quantitative System Performance" cited below. -- See Also Quantitative System Performance Computer System Analysis Using Queueing Network Models Edward D. Lazowska, John Zahorjan, G. Scott Graham, Kenneth C. Sevcik external local Oracle Database 11g – Oracle OLAP oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 11/2/2012.

    Read the article

  • Defaulting the HLSL Vertex and Pixel Shader Levels to Feature Level 9_1 in VS 2012

    - by Michael B. McLaughlin
    I love Visual Studio 2012. But this is not a post about that. This is a post about tweaking one particular parameter that I’ve found a bit annoying. Disclaimer: You will be modifying important MSBuild files. If you screw up you will break your build tools. And maybe your computer will catch fire. I’m not responsible. No warranties or guaranties of any sort. This info is provided “as is”. By default, if you add a new vertex shader or pixel shader item to a project, it will be set to build with shader profile 4.0_level_9_3. If you need 9_3 functionality, this is all well and good. But (especially for Windows Store apps) you really want to target the lowest shader profile possible so that your game will run on as many computers as possible. So it’s a good idea to default to 9_1. To do this you could add in new HLSL files via “Add->New Item->Visual C++->HLSL->______ Shader File (.hlsl)” and then edit the shader files’ properties to set them manually to use 9_1 via “Properties->HLSL Compiler->General->Shader Model”. This is fine unless you forget to do this once and then submit your game with 9_3 shaders instead of 9_1 shaders to the Windows Store or to some other game store. Then you’d wind up with either rejection or angry “this doesn’t work on my computer! ripoff!” messages. There’s another option though. In “Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\ItemTemplates\VC\HLSL\1033\VertexShader” (note the path might vary slightly for you if you are using a 32-bit system or have a non-ENU version of Visual Studio 2012) you will find a “VertexShader.vstemplate” file. If you open this file in a text editor (e.g. Notepad++), then inside the CustomParameters tag within the TemplateContent tag you should see a CustomParameter tag for the ShaderType, i.e.: <CustomParameter Name="$ShaderType$" Value="Vertex"/> On a new line, we are going to add another CustomParameter tag to the CustomParameters tag. It will look like this: <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/> such that we now have:     <CustomParameters>       <CustomParameter Name="$ShaderType$" Value="Vertex"/>       <CustomParameter Name="$ShaderModel$" Value="4.0_level_9_1"/>     </CustomParameters> You can then save the file (you will need to be an Administrator or have Administrator access). Back in the 1033 directory (or whatever the number is for your language), go into the “PixelShader” directory. Edit the “PixelShader.vstemplate” file and make the same change (note that this time $ShaderType$ is “Pixel” not “Vertex”; you shouldn’t be changing that line anyway, but if you were to just copy and replace the above four lines then you will wind up creating pixel shaders that the HLSL compiler would try to compile as vertex shaders, with all sort of weird errors as a result). Once you’ve added the $ShaderModel$ line to “PixelShader.vstemplate” and have saved it, everything should be done. Since Feature Level 9_1 and 9_3 don’t support any of the other shader types, those are set to default to their appropriate minimums already (Compute and Geometry are set to “4.0” and Domain and Hull are set to “5.0”, which are their respective minimums (though not all 4.0 cards support Compute shaders; they were an optional feature added with DirectX 10.1 and only became required for DirectX 11 hardware). In case you are wondering where these magic values come from, you can find them all in the “fxc.xml” file in the “\Program Files (x86)\MSBuild\Microsoft.CPP\v4.0\V110\1033” directory (or whatever your language number is; 1033 is ENU and various other product languages have their own respective numbers (see: http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx ) such that Japanese is 1041 (for example), though for all I know MSBuild tasks might be 1033 for everyone). If, like me, you installed VS 2012 to a drive other than the C:\ drive, you will find the vstemplate files in the drive to which you installed VS 2012 (D:\ in my case) but you will find the fxc.xml file on the C:\ drive. You should not edit fxc.xml. You will almost definitely break things by doing that; it’s just something you can look through to see all the other options that the FXC task takes such that you could, if needed, add further CustomParameter tags if you wanted to default to other supported options. I haven’t tried any others though so I don’t have any advice on how to set them.

    Read the article

  • Maximize Performance and Availability with Oracle Data Integration

    - by Tanu Sood
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms.  With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

    Read the article

  • Oracle Romania Summer School

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 What would you say about a Summer School within a corporation where you can learn, play and practice? You might think that this is something usually uncommon for a company and you would be right. However, Oracle’s main value being innovation, we came up with a new project for Romanian students and graduates. We organised Oracle Summer School , offering them the opportunity to develop their soft skills and gain valuable business knowledge and exposure. How was Oracle Summer School programme organised? We focused on students and graduates’ needs and combined business experience with training and practice. The twenty four participants had different backgrounds, being interested in Software, Hardware, Finance, Marketing or other areas. The programme fulfilled each of these needs, bringing them in contact with Specialists and Managers. The first two weeks were dedicated to the company visits, business presentations and networking. The participants got an insight about employees’ activities and projects. Storytelling was also part of the program and people from different departments spent a couple of hours with the participants, sharing their experiences, knowledge and interesting stories. The Recruitment team delivered a training about the job interview skills in order to make the participants feel better prepared for a Recruitment process. The second module consisted of two weeks of Soft Skills trainings delivered by professional trainers from different departments. The participants gained useful insight on the competencies required within a business environment. The evenings were dedicated to social activities and it not very long until they started feel part of a team. The third module will take place at the end of September and will put the participants in contact with senior people from the business who will become their Mentors. What do the participants say about Oracle Summer School? “ As a fresh computer science graduate, Oracle Summer School gave me the opportunity of finding what are the technical and nontechnical skills required in a large multinational company. It was a great way of seeing how the theoretical knowledge I received during college is applied in real-life scenarios and what skills I still need to develop. “  (Cosmin Radu) “ When arriving at Oracle I had high expectations, but did not know exactly what was going to unfold because of the program's lack of precedence. Right after the first day, my feedback outgrew the initial forecast and the following weeks continued to build upon it. I had the pleasure to acquaint with brilliant people. The program was outlined on various profiles, delivering a comprehensive experience. It was very engaging, informative and nevertheless fun. “ (Vlad Manciu) „ Oracle Summer School is by far the best summer school that I have ever attended. For me it has been a great experience so far, because I’ve learned not only how to use soft skills in a corporate environment, but I’ve learned a great deal about myself as well. However, the most valuable asset of this 3-week period were the people that I’ve met: great individuals and great professionals, whom I really grew fond of.” (Alexandru Purcarea) “Applying to Oracle Summer School has been the best decision I took in regard to how to spend my summer holiday. I had the chance to do job shadowing at some of the departments I was interested in and I attended great trainings on various subjects such as time management and emotional intelligence. Moreover, I made friends with the other participants and we enjoyed going out together after “classes”.(Andreea Tudor) If you are interested in joining our team and attending our events please follow us on https://campus.oracle.com/campus/HR/emea_main.html /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • jqGrid - dynamically load different drop down values for different rows depending on another column value

    - by Renso
    Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a  reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it.         var acctId = $('#Id').val();         var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText;         var lookupData = eval('(' + data + ')');         var listingCategory = lookupData.ListingCategory;         var listingStatus = lookupData.ListingStatus;         var catList = '{';         $(lookupData.ListingCategory).each(function() {             catList += this.Id + ':"' + this.Name + '",';         });         catList += '}';         var lastsel;         var ignoreAlert = true;         $(item)         .jqGrid({             url: listURL,             postData: '',             datatype: "local",             colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'],             colModel: [                 { name: 'Id', index: 'Id', hidden: true, hidedlg: true },                 { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 },                 { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 },                 { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} }             ],             jsonReader: {                 root: "List",                 page: "CurrentPage",                 total: "TotalPages",                 records: "TotalRecords",                 userdata: "Errors",                 repeatitems: false,                 id: "0"             },             rowNum: $rows,             rowList: [10, 20, 50, 200, 500, 1000, 2000],             imgpath: jQueryImageRoot,             pager: $(item + 'Pager'),             shrinkToFit: true,             width: 1455,             recordtext: 'Traffic lines',             sortname: 'OrderDate',             viewrecords: true,             sortorder: "asc",             altRows: true,             cellEdit: true,             cellsubmit: "remote",             cellurl: editURL + '?rows=' + $rows + '&page=1',             loadComplete: function() {               },             gridComplete: function() {             },             loadError: function(xhr, st, err) {             },             afterEditCell: function(rowid, cellname, value, iRow, iCol) {                 var select = $(item).find('td.edit-cell select');                 $(item).find('td.edit-cell select option').each(function() {                     var option = $(this);                     var optionId = $(this).val();                     $(lookupData.ListingCategory).each(function() {                         if (this.Id == optionId) {                                                       if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) {                                 option.remove();                                 return false;                             }                         }                     });                 });             },             search: true,             searchdata: {},             caption: "List of all Traffic lines",             editurl: editURL + '?rows=' + $rows + '&page=1',             hiddengrid: hideGrid   Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

    Read the article

  • 7-Eleven Improves the Digital Guest Experience With 10-Minute Application Provisioning

    - by MichaelM-Oracle
    By Vishal Mehra - Director, Cloud Computing, Oracle Consulting Making the Cloud Journey Matter There’s much more to cloud computing than cutting costs and closing data centers. In fact, cloud computing is fast becoming the engine for innovation and productivity in the digital age. Oracle Consulting Services contributes to our customers’ cloud journey by accelerating application provisioning and rapidly deploying enterprise solutions. By blending flexibility with standardization, our Middleware as a Service (MWaaS) offering is ensuring the success of many cloud initiatives. 10-Minute Application Provisioning Times at 7-Eleven As a case in point, 7-Eleven recently highlighted the scope, scale, and results of a cloud-powered environment. The world’s largest convenience store chain is rolling out a Digital Guest Experience (DGE) program across 8,500 stores in the U.S. and Canada. Everyday, 7-Eleven connects with tens of millions of customers through point-of-sale terminals, web sites, and mobile apps. Promoting customer loyalty, targeting promotions, downloading digital coupons, and accepting digital payments are all part of the roadmap for a comprehensive and rewarding customer experience. And what about the time required for deploying successive versions of this mission-critical solution? Ron Clanton, 7-Eleven's DGE Program Manager, Information Technology reported at Oracle Open World, " We are now able to provision new environments in less than 10 minutes. This includes the complete SOA Suite on Exalogic, and Enterprise Manager managing both the SOA Suite, Exalogic, and our Exadata databases ." OCS understands the complex nature of innovative solutions and has processes and expertise to help clients like 7-Eleven rapidly develop technology that enhances the customer experience with little more than the click of a button. OCS understood that the 7-Eleven roadmap required careful planning, agile development, and a cloud-capable environment to move fast and perform at enterprise scale. Business Agility Today’s business-savvy technology leaders face competing priorities as they confront the digital disruptions of the mobile revolution and next-generation enterprise applications. To support an innovation agenda, IT is required to balance competing priorities between development and operations groups. Standardization and consolidation of computing resources are the keys to success. With our operational and technical expertise promoting business agility, Oracle Consulting's deep Middleware as a Service experience can make a significant difference to our clients by empowering enterprise IT organizations with the computing environment they seek to keep up with the pace of change that digitally driven business units expect. Depending on the needs of the organization, this environment runs within a private, public, or hybrid cloud infrastructure. Through on-demand access to a shared pool of configurable computing resources, IT delivers the standard tools and methods for developing, integrating, deploying, and scaling next-generation applications. Gold profiles of predefined configurations eliminate the version mismatches among databases, application servers, and SOA suite components, delivered both by Oracle and other enterprise ISVs. These computing resources are well defined in business terms, enabling users to select what they need from a service catalog. Striking the Balance between Development and Operations As a result, development groups have the flexibility to choose among a menu of available services with descriptions of standard business functions, service level guarantees, and costs. Faced with the consumerization of enterprise IT, they can deliver the innovative customer experiences that seamlessly integrate with underlying enterprise applications and services. This cloud-powered development and testing environment accelerates release cycles to ensure agile development and rapid deployments. At the same time, the operations group is relying on certified stacks and frameworks, tuned to predefined environments and patterns. Operators can maintain a high level of security, and continue best practices for applications/systems monitoring and management. Moreover, faced with the challenges of delivering on service level agreements (SLAs) with the business units, operators can ensure performance, scalability, and reliability of the infrastructure. The elasticity of a cloud-computing environment – the ability to rapidly add virtual machines and storage in response to computing demands -- makes a difference for hardware utilization and efficiency. Contending with Continuous Change What does it take to succeed on the promise of the cloud? As the engine for innovation and productivity in the digital age, IT must face not only the technical transformations but also the organizational challenges of the cloud. Standardizing key technologies, resources, and services through cloud computing is only one part of the cloud journey. Managing relationships among multiple department and projects over time – developing the management, governance, and monitoring capabilities within IT – is an often unmentioned but all too important second part. In fact, IT must have the organizational agility to contend with continuous change. This is where a skilled consulting services partner can play a pivotal role as a trusted advisor in the successful adoption of cloud solutions. With a lifecycle services approach to delivering innovative business solutions, Oracle Consulting Services has expertise and a portfolio of services to help enterprise customers succeed on their cloud journeys as well as other converging mega trends .

    Read the article

  • Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

    - by Charles Lamb
    We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards.  Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM.  There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

    Read the article

  • Performance triage

    - by Dave
    Folks often ask me how to approach a suspected performance issue. My personal strategy is informed by the fact that I work on concurrency issues. (When you have a hammer everything looks like a nail, but I'll try to keep this general). A good starting point is to ask yourself if the observed performance matches your expectations. Expectations might be derived from known system performance limits, prototypes, and other software or environments that are comparable to your particular system-under-test. Some simple comparisons and microbenchmarks can be useful at this stage. It's also useful to write some very simple programs to validate some of the reported or expected system limits. Can that disk controller really tolerate and sustain 500 reads per second? To reduce the number of confounding factors it's better to try to answer that question with a very simple targeted program. And finally, nothing beats having familiarity with the technologies that underlying your particular layer. On the topic of confounding factors, as our technology stacks become deeper and less transparent, we often find our own technology working against us in some unexpected way to choke performance rather than simply running into some fundamental system limit. A good example is the warm-up time needed by just-in-time compilers in Java Virtual Machines. I won't delve too far into that particular hole except to say that it's rare to find good benchmarks and methodology for java code. Another example is power management on x86. Power management is great, but it can take a while for the CPUs to throttle up from low(er) frequencies to full throttle. And while I love "turbo" mode, it makes benchmarking applications with multiple threads a chore as you have to remember to turn it off and then back on otherwise short single-threaded runs may look abnormally fast compared to runs with higher thread counts. In general for performance characterization I disable turbo mode and fix the power governor at "performance" state. Another source of complexity is the scheduler, which I've discussed in prior blog entries. Lets say I have a running application and I want to better understand its behavior and performance. We'll presume it's warmed up, is under load, and is an execution mode representative of what we think the norm would be. It should be in steady-state, if a steady-state mode even exists. On Solaris the very first thing I'll do is take a set of "pstack" samples. Pstack briefly stops the process and walks each of the stacks, reporting symbolic information (if available) for each frame. For Java, pstack has been augmented to understand java frames, and even report inlining. A few pstack samples can provide powerful insight into what's actually going on inside the program. You'll be able to see calling patterns, which threads are blocked on what system calls or synchronization constructs, memory allocation, etc. If your code is CPU-bound then you'll get a good sense where the cycles are being spent. (I should caution that normal C/C++ inlining can diffuse an otherwise "hot" method into other methods. This is a rare instance where pstack sampling might not immediately point to the key problem). At this point you'll need to reconcile what you're seeing with pstack and your mental model of what you think the program should be doing. They're often rather different. And generally if there's a key performance issue, you'll spot it with a moderate number of samples. I'll also use OS-level observability tools to lock for the existence of bottlenecks where threads contend for locks; other situations where threads are blocked; and the distribution of threads over the system. On Solaris some good tools are mpstat and too a lesser degree, vmstat. Try running "mpstat -a 5" in one window while the application program runs concurrently. One key measure is the voluntary context switch rate "vctx" or "csw" which reflects threads descheduling themselves. It's also good to look at the user; system; and idle CPU percentages. This can give a broad but useful understanding if your threads are mostly parked or mostly running. For instance if your program makes heavy use of malloc/free, then it might be the case you're contending on the central malloc lock in the default allocator. In that case you'd see malloc calling lock in the stack traces, observe a high csw/vctx rate as threads block for the malloc lock, and your "usr" time would be less than expected. Solaris dtrace is a wonderful and invaluable performance tool as well, but in a sense you have to frame and articulate a meaningful and specific question to get a useful answer, so I tend not to use it for first-order screening of problems. It's also most effective for OS and software-level performance issues as opposed to HW-level issues. For that reason I recommend mpstat & pstack as my the 1st step in performance triage. If some other OS-level issue is evident then it's good to switch to dtrace to drill more deeply into the problem. Only after I've ruled out OS-level issues do I switch to using hardware performance counters to look for architectural impediments.

    Read the article

  • Taking the Plunge - or Dipping Your Toe - into the Fluffy IAM Cloud by Paul Dhanjal (Simeio Solutions)

    - by Greg Jensen
    In our last three posts, we’ve examined the revolution that’s occurring today in identity and access management (IAM). We looked at the business drivers behind the growth of cloud-based IAM, the shortcomings of the old, last-century IAM models, and the new opportunities that federation, identity hubs and other new cloud capabilities can provide by changing the way you interact with everyone who does business with you. In this, our final post in the series, we’ll cover the key things you, the enterprise architect, should keep in mind when considering moving IAM to the cloud. Invariably, what starts the consideration process is a burning business need: a compliance requirement, security vulnerability or belt-tightening edict. Many on the business side view IAM as the “silver bullet” – and for good reason. You can almost always devise a solution using some aspect of IAM. The most critical question to ask first when using IAM to address the business need is, simply: is my solution complete? Typically, “business” is not focused on the big picture. Understandably, they’re focused instead on the need at hand: Can we be HIPAA compliant in 6 months? Can we tighten our new hire, employee transfer and termination processes? What can we do to prevent another password breach? Can we reduce our service center costs by the end of next quarter? The business may not be focused on the complete set of services offered by IAM but rather a single aspect or two. But it is the job – indeed the duty – of the enterprise architect to ensure that all aspects are being met. It’s like remodeling a house but failing to consider the impact on the foundation, the furnace or the zoning or setback requirements. While the homeowners may not be thinking of such things, the architect, of course, must. At Simeio Solutions, the way we ensure that all aspects are being taken into account – to expose any gaps or weaknesses – is to assess our client’s IAM capabilities against a five-step maturity model ranging from “ad hoc” to “optimized.” The model we use is similar to Capability Maturity Model Integration (CMMI) developed by the Software Engineering Institute (SEI) at Carnegie Mellon University. It’s based upon some simple criteria, which can provide a visual representation of how well our clients fair when evaluated against four core categories: ·         Program Governance ·         Access Management (e.g., Single Sign-On) ·         Identity and Access Governance (e.g., Identity Intelligence) ·         Enterprise Security (e.g., DLP and SIEM) Often our clients believe they have a solution with all the bases covered, but the model exposes the gaps or weaknesses. The gaps are ideal opportunities for the cloud to enter into the conversation. The complete process is straightforward: 1.    Look at the big picture, not just the immediate need – what is our roadmap and how does this solution fit? 2.    Determine where you stand with respect to the four core areas – what are the gaps? 3.    Decide how to cover the gaps – what role can the cloud play? Returning to our home remodeling analogy, at some point, if gaps or weaknesses are discovered when evaluating the complete impact of the proposed remodel – if the existing foundation wouldn’t support the new addition, for example – the owners need to decide if it’s time to move to a new house instead of trying to remodel the old one. However, with IAM it’s not an either-or proposition – i.e., either move to the cloud or fix the existing infrastructure. It’s possible to use new cloud technologies just to cover the gaps. Many of our clients start their migration to the cloud this way, dipping in their toe instead of taking the plunge all at once. Because our cloud services offering is based on the Oracle Identity and Access Management Suite, we can offer a tremendous amount of flexibility in this regard. The Oracle platform is not a collection of point solutions, but rather a complete, integrated, best-of-breed suite. Yet it’s not an all-or-nothing proposition. You can choose just the features and capabilities you need using a pay-as-you-go model, incrementally turning on and off services as needed. Better still, all the other capabilities are there, at the ready, whenever you need them. Spooling up these cloud-only services takes just a fraction of the time it would take a typical organization to deploy internally. SLAs in the cloud may be higher than on premise, too. And by using a suite of software that’s complete and integrated, you can dramatically lower cost and complexity. If your in-house solution cannot be migrated to the cloud, you might consider using hardware appliances such as Simeio’s Cloud Interceptor to extend your enterprise out into the network. You might also consider using Expert Managed Services. Cost is usually the key factor – not just development costs but also operational sustainment costs. Talent or resourcing issues often come into play when thinking about sustaining a program. Expert Managed Services such as those we offer at Simeio can address those concerns head on. In a cloud offering, identity and access services lend to the new paradigms described in my previous posts. Most importantly, it allows us all to focus on what we're meant to do – provide value, lower costs and increase security to our respective organizations. It’s that magic “silver bullet” that business knew you had all along. If you’d like to talk more, you can find us at simeiosolutions.com.

    Read the article

  • JPRT: A Build & Test System

    - by kto
    DRAFT A while back I did a little blogging on a system called JPRT, the hardware used and a summary on my java.net weblog. This is an update on the JPRT system. JPRT ("JDK Putback Reliablity Testing", but ignore what the letters stand for, I change what they mean every day, just to annoy people :\^) is a build and test system for the JDK, or any source base that has been configured for JPRT. As I mentioned in the above blog, JPRT is a major modification to a system called PRT that the HotSpot VM development team has been using for many years, very successfully I might add. Keeping the source base always buildable and reliable is the first step in the 12 steps of dealing with your product quality... or was the 12 steps from Alcoholics Anonymous... oh well, anyway, it's the first of many steps. ;\^) Internally when we make changes to any part of the JDK, there are certain procedures we are required to perform prior to any putback or commit of the changes. The procedures often vary from team to team, depending on many factors, such as whether native code is changed, or if the change could impact other areas of the JDK. But a common requirement is a verification that the source base with the changes (and merged with the very latest source base) will build on many of not all 8 platforms, and a full 'from scratch' build, not an incremental build, which can hide full build problems. The testing needed varies, depending on what has been changed. Anyone that was worked on a project where multiple engineers or groups are submitting changes to a shared source base knows how disruptive a 'bad commit' can be on everyone. How many times have you heard: "So And So made a bunch of changes and now I can't build!". But multiply the number of platforms by 8, and make all the platforms old and antiquated OS versions with bizarre system setup requirements and you have a pretty complicated situation (see http://download.java.net/jdk6/docs/build/README-builds.html). We don't tolerate bad commits, but our enforcement is somewhat lacking, usually it's an 'after the fact' correction. Luckily the Source Code Management system we use (another antique called TeamWare) allows for a tree of repositories and 'bad commits' are usually isolated to a small team. Punishment to date has been pretty drastic, the Queen of Hearts in 'Alice in Wonderland' said 'Off With Their Heads', well trust me, you don't want to be the engineer doing a 'bad commit' to the JDK. With JPRT, hopefully this will become a thing of the past, not that we have had many 'bad commits' to the master source base, in general the teams doing the integrations know how important their jobs are and they rarely make 'bad commits'. So for these JDK integrators, maybe what JPRT does is keep them from chewing their finger nails at night. ;\^) Over the years each of the teams have accumulated sets of machines they use for building, or they use some of the shared machines available to all of us. But the hunt for build machines is just part of the job, or has been. And although the issues with consistency of the build machines hasn't been a horrible problem, often you never know if the Solaris build machine you are using has all the right patches, or if the Linux machine has the right service pack, or if the Windows machine has it's latest updates. Hopefully the JPRT system can solve this problem. When we ship the binary JDK bits, it is SO very important that the build machines are correct, and we know how difficult it is to get them setup. Sure, if you need to debug a JDK problem that only shows up on Windows XP or Solaris 9, you'll still need to hunt down a machine, but not as a regular everyday occurance. I'm a big fan of a regular nightly build and test system, constantly verifying that a source base builds and tests out. There are many examples of automated build/tests, some that trigger on any change to the source base, some that just run every night. Some provide a protection gateway to the 'golden' source base which only gets changes that the nightly process has verified are good. The JPRT (and PRT) system is meant to guard the source base before anything is sent to it, guarding all source bases from the evil developer, well maybe 'evil' isn't the right word, I haven't met many 'evil' developers, more like 'error prone' developers. ;\^) Humm, come to think about it, I may be one from time to time. :\^{ But the point is that by spreading the build up over a set of machines, and getting the turnaround down to under an hour, it becomes realistic to completely build on all platforms and test it, on every putback. We have the technology, we can build and rebuild and rebuild, and it will be better than it was before, ha ha... Anybody remember the Six Million Dollar Man? Man, I gotta get out more often.. Anyway, now the nightly build and test can become a 'fetch the latest JPRT build bits' and start extensive testing (the testing not done by JPRT, or the platforms not tested by JPRT). Is it Open Source? No, not yet. Would you like to be? Let me know. Or is it more important that you have the ability to use such a system for JDK changes? So enough blabbering on about this JPRT system, tell me what you think. And let me know if you want to hear more about it or not. Stay tuned for the next episode, same Bloody Bat time, same Bloody Bat channel. ;\^) -kto

    Read the article

  • Cloud to On-Premise Connectivity Patterns

    - by Rajesh Raheja
    Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

    Read the article

  • Cloud to On-Premise Connectivity Patterns

    - by Rajesh Raheja
    Do you have a requirement to convert an Opportunity in Salesforce.com to an Order/Quote in Oracle E-Business Suite? Or maybe you want the creation of an Oracle RightNow Incident to trigger an on-premise Oracle E-Business Suite Service Request creation for RMA and Field Scheduling? If so, read on. In a previous blog post, I discussed integrating TO cloud applications, however the use cases above are the reverse i.e. receiving data FROM cloud applications (SaaS) TO on-premise applications/databases that sit behind a firewall. Oracle SOA Suite is assumed to be on-premise with with Oracle Service Bus as the mediation and virtualization layer. The main considerations for the patterns are are security i.e. shielding enterprise resources; and scalability i.e. minimizing firewall latency. Let me use an analogy to help visualize the patterns: the on-premise system is your home - with your most valuable possessions - and the SaaS app is your favorite on-line store which regularly ships (inbound calls) various types of parcels/items (message types/service operations). You need the items at home (on-premise) but want to safe guard against misguided elements of society (internet threats) who may masquerade as postal workers and vandalize property (denial of service?). Let's look at the patterns. Pattern: Pull from Cloud The on-premise system polls from the SaaS apps and picks up the message instead of having it delivered. This may be done using Oracle RightNow Object Query Language or SOAP APIs. This is particularly suited for certain integration approaches wherein messages are trickling in, can be centralized and batched e.g. retrieving event notifications on an hourly schedule from the Oracle Messaging Service. To compare this pattern with the home analogy, you are avoiding any deliveries to your home and instead go to the post office/UPS/Fedex store to pick up your parcel. Every time. Pros: On-premise assets not exposed to the Internet, firewall issues avoided by only initiating outbound connections Cons: Polling mechanisms may affect performance, may not satisfy near real-time requirements Pattern: Open Firewall Ports The on-premise system exposes the web services that needs to be invoked by the cloud application. This requires opening up firewall ports, routing calls to the appropriate internal services behind the firewall. Fusion Applications uses this pattern, and auto-provisions the services on the various virtual hosts to secure the topology. This works well for service integration, but may not suffice for large volume data integration. Using the home analogy, you have now decided to receive parcels instead of going to the post office every time. A door mail slot cut out allows the postman can drop small parcels, but there is still concern about cutting new holes for larger packages. Pros: optimal pattern for near real-time needs, simpler administration once the service is provisioned Cons: Needs firewall ports to be opened up for new services, may not suffice for batch integration requiring direct database access Pattern: Virtual Private Networking The on-premise network is "extended" to the cloud (or an intermediary on-demand / managed service offering) using Virtual Private Networking (VPN) so that messages are delivered to the on-premise system in a trusted channel. Using the home analogy, you entrust a set of keys with a neighbor or property manager who receives the packages, and then drops it inside your home. Pros: Individual firewall ports don't need to be opened, more suited for high scalability needs, can support large volume data integration, easier management of one connection vs a multitude of open ports Cons: VPN setup, specific hardware support, requires cloud provider to support virtual private computing Pattern: Reverse Proxy / API Gateway The on-premise system uses a reverse proxy "API gateway" software on the DMZ to receive messages. The reverse proxy can be implemented using various mechanisms e.g. Oracle API Gateway provides firewall and proxy services along with comprehensive security, auditing, throttling benefits. If a firewall already exists, then Oracle Service Bus or Oracle HTTP Server virtual hosts can provide reverse proxy implementations on the DMZ. Custom built implementations are also possible if specific functionality (such as message store-n-forward) is needed. In the home analogy, this pattern sits in between cutting mail slots and handing over keys. Instead, you install (and maintain) a mailbox in your home premises outside your door. The post office delivers the parcels in your mailbox, from where you can securely retrieve it. Pros: Very secure, very flexible Cons: Introduces a new software component, needs DMZ deployment and management Pattern: On-Premise Agent (Tunneling) A light weight "agent" software sits behind the firewall and initiates the communication with the cloud, thereby avoiding firewall issues. It then maintains a bi-directional connection either with pull or push based approaches using (or abusing, depending on your viewpoint) the HTTP protocol. Programming protocols such as Comet, WebSockets, HTTP CONNECT, HTTP SSH Tunneling etc. are possible implementation options. In the home analogy, a resident receives the parcel from the postal worker by opening the door, however you still take precautions with chain locks and package inspections. Pros: Light weight software, IT doesn't need to setup anything Cons: May bypass critical firewall checks e.g. virus scans, separate software download, proliferation of non-IT managed software Conclusion The patterns above are some of the most commonly encountered ones for cloud to on-premise integration. Selecting the right pattern for your project involves looking at your scalability needs, security restrictions, sync vs asynchronous implementation, near real-time vs batch expectations, cloud provider capabilities, budget, and more. In some cases, the basic "Pull from Cloud" may be acceptable, whereas in others, an extensive VPN topology may be well justified. For more details on the Oracle cloud integration strategy, download this white paper.

    Read the article

  • Soft lockup after upgrade - cannot install from live CD

    - by nbm
    I dual-boot MacIntel Core 2 duo. nVidia graphics. Ran upgrade from ubuntu 13.10 to 14.04 (64 bit). On restart ran into {numbers} Bug: soft lockup - CPU#0 stuck for 22s! [swapper/0:1] Tried loading earlier kernel: same problem Tried re-installing ubuntu from a liveCD that has worked in the past: version 13.04. Same problem. Tried re-partitioning hard drive using Mac OS X disk utility and then installing ubuntu 14.04LTS from liveCD. Same problem. Not possible to verify liveCD disk (creates same "soft lockup" bug.) Tried installing from the liveCD with version 13.04 that I know works (that's how I got Ubuntu on this machine in the first place.) Same problem. I know this is not a hardware problem as OS X works just fine, I am using it right now on the same machine. I have been using various versions of Ubuntu for 2 years. Things I cannot do: Open a terminal Verify CD image Start ubuntu from CD (same soft lockup problem) This problem is similar to some other questions, none of which have been satisfactorily answered: Ubuntu 14.04 soft lockup on Vostro 3500 Cannot do fresh install of Ubuntu 13.04 while booting from DVD: "soft lockup" bug Live CD stalls when installing Ubuntu 13.10 UPDATE 6/11/14: Following some much-appreciated advice from bain (see below) I burned a 12.04LTS disk and started with kernel parameters: noapic, no1apic, acpi=off, nomodeset, elevator=deadline, and clocksource=jiffies. With all of these parameters I was able to load the 12.04LTS CD ("Try without installing"). It worked fine. However, as soon as I tried to install Ubuntu from the CD, my wired ethernet (eth0) connection would hang. There are already various askubuntu questions and bug reports about this problem, none of which had answers for me. (E.g., dhclient eth0 does nothing, none of the various reset commands does anything, manually setting IP &etc does nothing. I could reliably kill the ethernet connection by clicking "install ubuntu" every single time.) I could go ahead and install 12.04 without an internet connection, but the install would freeze after mostly completing (I tried several times.) There were some relevant error messages in the details of the install output script that, IIRC, had to do with searching for missing files and not being able to access eth0 (internet) to get them. To be honest I gave up at that point and I'm not sure I wrote those down. If I find some notes I will post them. At this point I no longer have Ubuntu on my system. I wiped the partitions and am using exclusively OS X. I am leaving this question in case it helps anyone else with similar problems. I love open source and I love Linux, and the next machine I get I will probably just build from Arch. At the moment I miss repositories and a lot of other things about Ubuntu, but the OS X terminal is 'nix, I can pretty much use all the open source apps I like, and while I am not a fan of the Apple software it gets the job done for me. Unlike Ubuntu, which can't even install. I realize this isn't necessarily a place for a soapbox speech, but when I first installed 12.04 several years ago there were already people in the community complaining that Canonical was going too "commercial". But I loved it. Several years later and all I've seen is Canonical adding more not-so-useful bells and whistles to Ubuntu while continually failing to fix basic problems on upgrades. With a dual-boot (and sometimes triple-boot) system it always took me some tweaking to get an upgrade to work, and to some extent that is okay. But at this point I feel like Canonical ought to just put a price tag on Ubuntu. All I see is more commercialism and advertising and product tie-ins, and ongoing problems do not get fixed. I am a big fan of open-source, not-for profit enterprise. I am also a big fan of for-profit enterprise, which certainly has its place and usefulness. I am not a fan of companies who pretend to be in favor of open source but really are just out to make a buck, and IMNSHO that is what Canonical has become. This is a great community and I wish you all the best, but my next install of Linux will not be Ubuntu.

    Read the article

  • Clone a VirtualBox Machine

    I just installed VirtualBox, which I want to try out based on recommendations from peers for running a server from within my Windows 7 x64 OS.  Ive never used VirtualBox, so Im certainly no expert at it, but I did want to share my experience with it thus far.  Specifically, my intention is to create a couple of virtual machines.  One I intend to use as a build server, for which a virtual machine makes sense because I can easily move it around as needed if there are hardware issues (its worth noting my need for setting up a build server at the moment is a result of a disk failure on the old build server).  The other VM I want to set up will act as a proxy server for the issue tracking system were using at Code Project, Axosoft OnTime.  They have a Remote Server application for this purpose, and since the OnTime install is 300 miles away from my location, the Remote Server should speed up my use of the OnTime client by limiting the chattiness with the database (at least, thats the hope). So, I need two VMs, and Im lazy.  I dont want to have to install the OS and such twice.  No problem, it should be simple to clone a virtualbox machine, or clone a virtualbox hard drive, right?  Well unfortunately, if you look at the UI for VirtualBox, theres no such command.  Youre left wondering How do I clone a VirtualBox machine? or the slightly related How do I clone a VirtualBox hard drive? If youve used VirtualPC, then you know that its actually pretty easy to copy and move around those VMs.  Not quite so easy with VirtualBox.  Finding the files is easy, theyre located in your user folder within the .VirtualBox folder (possibly within a HardDisks folder).  The disks have a .vdi extension and will be pretty large if youve installed anything.  The one shown here has just Windows Server 2008 R2 installed on it nothing else. If you copy the .vdi file and rename it, you can use the Virtual Media Manager to view it and you can create a new machine and choose the new drive to attach to.  Unfortunately, if you simply make a copy of the drive, this wont work and youll get an error that says something to the effect of: Cannot register the hard disk PATH with UUID {id goes here} because a hard disk PATH2 with UUID {same id goes here} already exists in the media registry (PATH to XML file). There are command line tools you can use to do this in a way that avoids this error.  Specifically, the c:\Program File\Sun\VirtualBox\VBoxManage.exe program is used for all command line access to VirtualBox, and to copy a virtual disk (.vdi file) you would call something like this: VBoxManage clonehd Disk1.vdi Disk1_Copy.vdi However, in my case this didnt work.  I got basically the same error I showed above, along with some debug information for line 628 of VBoxManageDisk.cpp.  As my main task was not to debug the C++ code used to write VirtualBox, I continued looking for a simple way to clone a virtual drive.  I found it in this blog post. The Secret setvdiuuid Command VBoxManage has a whole bunch of commands you can use with it just pass it /? to see the list.  However, it also has a special command called internalcommands that opens up access to even more commands.  The one thats interesting for us here is the setvdiuuid command.  By calling this command and passing in the file path to your vdi file, it will reset the UUID to a new (random, apparently) UUID.  This then allows the virtual media manager to cope with the file, and lets you set up new machines that reference the newly UUIDd virtual drive.  The full command line would be: VBoxManage internalcommands setvdiuuid MyCopy.vdi The following screenshot shows the error when trying clonehd as well as the successful use of setvdiuuid. Summary Now that I can clone machines easily, its a simple matter to set up base builds of any OS I might need, and then fork from there as needed.  Hopefully the GUI for VirtualBox will be improved to include better support for copying machines/disks, as this is Im sure a very common scenario. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • CS, SE, HCI, Information Science, Please recommendation for further education of the former performing art manager seeking career in IT industries? [on hold]

    - by Baek Seungjoo
    IT specialists there J Thank you very much for your collective efforts here, and I got huge help reading your professional comments and advices on each questions I have searched so far! This time, I would like to ask for your practical advices or recommendation on what I am struggling on at this moment. I am currently seeking higher education for my career transition from performing art manager and director to “IT software and/or service development and management specialist”. However, as this field is quite new to me, and there are lots of different work positions, I have no idea which grad major I better pursue in order to get qualification. Of course I know this question could sounds wired as it is kind of personal choice. But my lack of understanding on how IT software companies work in general, your practical and experience-based advice will be great help to me, who spent more than two months of self-research on net. OK. Before my question, here is my plan and history, which are quite different from those currently in IT industry I think… 1) Target Firstly, get career transition into IT service or products companies and get experiences. Eventually, pursue IT entrepreneurship in combination with my arts and cultural production and business expertise. 2) Background Career: performing arts director and manager in theatre-based scale opera and musical Art education in youth BA in literature and Chinese studies (Art & Humanities) MA in Cultural & Creative Industries (Art & Humanities) – dissertation with focus on digital prosumption and the lived experience of the prosumer. (a qualitative research on the agents in the digital world) 2) Personally Huge interest in IT hardware and software, and their trend. Skills to build up, repair, tune PCs -of course this is no more than personal hobby, but shows my interests in this field. 4) Problem Encounter a question “So, what do you think you can contribute practically in this position”. This question turn me down everytime I go through job interviews, and I decided more education in the relevant area. Here are my questions. 1) In terms of work positions in IT software companies, I wonder if I can put the comparison of what “Artists” is to “Arts Manager or Director” is what “Developer” is to “Product Manager”. (Of course, this stereotypical division of Artist-Art Manager is out of sense because the domain overlaps to some extent, and is blurring at least in my field, and they are in different contexts, but just speaking easily.) Normally, artist comes with special arts educations, and they live in their own world of artistic inspiration and creation, and they feel alive in practice and on stages. Meanwhile, from the point of staging and managing productions, the role of art manager is critical as well. Our role cares how the production appeals to the audience in effective way, how to make profit and future sustainable management through that, how to set up future strategy in consideration of the external conditions such as political and social circumstances, audience trend and level, other production trends from on-going and historical perspectives, how and what the production make voice to the society from political, economic, humanitarian stances. So, we need keen eyes on economic, political, and societal environment, have to understand human-being and their desires, must know how to make presentation and attract investors, must have sense in managing and fighting over the limited financial resource, how to extend networking and so on. It is common that the two agents create productions in collaboration (normally not in that ideal way but in conflict and fight though J ). So, we need to know each other’s expertise to some extent, for better production. What are the work positions in IT software industries equivalent to the role of “art manager” in performing arts? From my view, considering developers come with special education in the world of computer science, software engineering, or others (self-education sometimes), and they express themselves with the arts of coding, computer languages on the black screen, and make sort of their artistic production online to the audience, I guess there might be someone who collaborate with developers in creating, managing, and launching IT services or products. 2) Which education among CS, SE, HCI, Information Science, is needed for those seeking such work position? Especially for person like me. (At this moment, Information Science has the highest possibility to get in, since I lack Calculus and Math in undergrad educaiton. But please let me know irrespective of this concern, I think there are ways to back it up if CS or SE education needed in my case) 3) Which field between Information Science and HCI can be more practical background regarding job hungting? And which of them have more demands in job market? AS I checked, HCI is more close to CS than IS in its focus of study area. Thank you very much for your patience reading such a long inquiry, and I appreciate to your efforts in advance. Have a nice day in this beautiful summer.

    Read the article

  • What Counts for A DBA - Logic

    - by drsql
    "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

    Read the article

  • How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

    - by Ibuntu
    I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

    Read the article

  • Windows Phone 8 Launch Event Summary

    - by Tim Murphy
    Today was the official coming out party for Windows Phone 8.  Below is a summary of the launch event.  There is a lot here to stay with me. They started with a commercial staring Joe Belfiore show how his Windows Phone 8 was personal too him which highlights something I think Microsoft has done well over the last couple of event: spotlight how Windows Phone is a different experience from other smartphones.  Joe actually called iPhone and Android “tired old metaphors" and explained that the idea around Windows Phone was to “reinvent the smartphone around you” as “the most personal smartphone operating system”.  The is the message that they need to drive home in their adds. The only real technical aspect we found out was that they have optimized the operating system around the dual core Qualcomm Snapdragon chip set.  It seems like all of the other hardware goodies had already been announced.  The remainder of the event was centered around new features of the OS and app announcements. So what are we getting?  The integrated features included lock screen live tile, Data Sense, Rooms and Kids corner.  There wasn’t a lot of information about it, but Joe also talked about apps not just having live tiles, but being live apps that could integrate with wallet and the hub. The lock screen will now be able to be personalized with live tile data or even a photo slide show.  This gives the lock screen an even better ability to give you the information you want to know before you even unlock the phone. The Kids Corner allows you as a parent to setup an area on your phone that you kids can go into an use it without disturbing your apps.  They can play games or use apps that you have designated and will only see those apps.  It even has a special lock screen gesture just for the kids corner. Rooms allow you to organize your phone around the groups of people in your life.  You get a shared calendar, a room wall as well as shared notes beyond just being able to send messages to a group.  You can also invite people not on the Windows Phone platform to access an online version of the room. Data Sense is a new feature that gives you better control and understanding of your data plan usage.  You can see which applications are using data and it can automatically adjust they way your phone behaves as you get close to your data limit. Add to these features the fact that the entire Windows ecosystem is integrated with SkyDrive and you have an available anywhere experience that is unequaled by any other platform.  Your document, photos and music are available on your Windows Phone, Window 8 device and Xbox.  SkyDrive also doesn’t limit how long you can keep files like the competing cloud platforms and give more free storage. It was interesting the way they made the launch event more personal.  First Joe brought out his own kids to demo the Kids Corner.  They followed this up by bringing out Jessica Alba to discuss her experience on the Windows Phone 8.  They need to keep putting a face on the product instead of just showing features as a cold list. Then we get to apps.  We knew that the new Skype was coming, but we found out that it was created in such a way that it can receive calls without running consistently in the background which would eat up battery.  This announcement was follow by the coming Facebook app that is optimized for Windows Phone 8.  As a matter of fact they indicated that just after launch the marketplace would have 46 out of the top 50 apps used by all smartphone platforms.  In a rational world this tide with over 120,000 apps currently in the marketplace there should be no more argument about the Windows Phone ecosystem. For those of us who develop for Windows Phone and weren’t on the early adoption program will finally get access to the SDK tomorrow after an announcement at Build (more waiting).  Perhaps we will get a few new features then. In the end I wouldn’t say there were any huge surprises, but I am really excited about getting my hands on the devices next month and starting to develop.  Stay tuned. del.icio.us Tags: Windows Phone,Windows Phone 8,Winodws Phone 8 Launch,Joe Belfiore,Jessica Alba

    Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >