Search Results

Search found 7872 results on 315 pages for 'unsupported hardware'.

Page 303/315 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

• AMD 24 core server memory bandwidth

  - by ntherning

  I need some help to determine whether the memory bandwidth I'm seeing under Linux on my server is normal or not. Here's the server spec: HP ProLiant DL165 G7 2x AMD Opteron 6164 HE 12-Core 40 GB RAM (10 x 4GB DDR1333) Debian 6.0 Using mbw on this server I get the following numbers: foo1:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.58047 MiB: 1024.00000 Copy: 1764.082 MiB/s 1 Method: MEMCPY Elapsed: 0.58012 MiB: 1024.00000 Copy: 1765.152 MiB/s 2 Method: MEMCPY Elapsed: 0.58010 MiB: 1024.00000 Copy: 1765.201 MiB/s AVG Method: MEMCPY Elapsed: 0.58023 MiB: 1024.00000 Copy: 1764.811 MiB/s 0 Method: DUMB Elapsed: 0.36174 MiB: 1024.00000 Copy: 2830.778 MiB/s 1 Method: DUMB Elapsed: 0.35869 MiB: 1024.00000 Copy: 2854.817 MiB/s 2 Method: DUMB Elapsed: 0.35848 MiB: 1024.00000 Copy: 2856.481 MiB/s AVG Method: DUMB Elapsed: 0.35964 MiB: 1024.00000 Copy: 2847.310 MiB/s 0 Method: MCBLOCK Elapsed: 0.23546 MiB: 1024.00000 Copy: 4348.860 MiB/s 1 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.230 MiB/s 2 Method: MCBLOCK Elapsed: 0.23544 MiB: 1024.00000 Copy: 4349.359 MiB/s AVG Method: MCBLOCK Elapsed: 0.23545 MiB: 1024.00000 Copy: 4349.149 MiB/s On one of my other servers (based on Intel Xeon E3-1270): foo2:~# mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.18960 MiB: 1024.00000 Copy: 5400.901 MiB/s 1 Method: MEMCPY Elapsed: 0.18922 MiB: 1024.00000 Copy: 5411.690 MiB/s 2 Method: MEMCPY Elapsed: 0.18944 MiB: 1024.00000 Copy: 5405.491 MiB/s AVG Method: MEMCPY Elapsed: 0.18942 MiB: 1024.00000 Copy: 5406.024 MiB/s 0 Method: DUMB Elapsed: 0.14838 MiB: 1024.00000 Copy: 6901.200 MiB/s 1 Method: DUMB Elapsed: 0.14818 MiB: 1024.00000 Copy: 6910.561 MiB/s 2 Method: DUMB Elapsed: 0.14820 MiB: 1024.00000 Copy: 6909.628 MiB/s AVG Method: DUMB Elapsed: 0.14825 MiB: 1024.00000 Copy: 6907.127 MiB/s 0 Method: MCBLOCK Elapsed: 0.04362 MiB: 1024.00000 Copy: 23477.623 MiB/s 1 Method: MCBLOCK Elapsed: 0.04262 MiB: 1024.00000 Copy: 24025.151 MiB/s 2 Method: MCBLOCK Elapsed: 0.04258 MiB: 1024.00000 Copy: 24048.849 MiB/s AVG Method: MCBLOCK Elapsed: 0.04294 MiB: 1024.00000 Copy: 23847.599 MiB/s For reference here's what I get on my Intel based laptop: laptop:~$ mbw -n 3 1024 Long uses 8 bytes. Allocating 2*134217728 elements = 2147483648 bytes of memory. Using 262144 bytes as blocks for memcpy block copy test. Getting down to business... Doing 3 runs per test. 0 Method: MEMCPY Elapsed: 0.40566 MiB: 1024.00000 Copy: 2524.269 MiB/s 1 Method: MEMCPY Elapsed: 0.38458 MiB: 1024.00000 Copy: 2662.638 MiB/s 2 Method: MEMCPY Elapsed: 0.38876 MiB: 1024.00000 Copy: 2634.043 MiB/s AVG Method: MEMCPY Elapsed: 0.39300 MiB: 1024.00000 Copy: 2605.600 MiB/s 0 Method: DUMB Elapsed: 0.30707 MiB: 1024.00000 Copy: 3334.745 MiB/s 1 Method: DUMB Elapsed: 0.30425 MiB: 1024.00000 Copy: 3365.653 MiB/s 2 Method: DUMB Elapsed: 0.30342 MiB: 1024.00000 Copy: 3374.849 MiB/s AVG Method: DUMB Elapsed: 0.30491 MiB: 1024.00000 Copy: 3358.328 MiB/s 0 Method: MCBLOCK Elapsed: 0.07875 MiB: 1024.00000 Copy: 13003.670 MiB/s 1 Method: MCBLOCK Elapsed: 0.08374 MiB: 1024.00000 Copy: 12228.034 MiB/s 2 Method: MCBLOCK Elapsed: 0.07635 MiB: 1024.00000 Copy: 13411.216 MiB/s AVG Method: MCBLOCK Elapsed: 0.07961 MiB: 1024.00000 Copy: 12862.006 MiB/s So according to mbw my laptop is 3 times faster than the server!!! Please help me explain this. I've also tried to mount a ram disk and use dd to benchmark it and I get similar differences so I don't think mbw is to blame. I've checked the BIOS settings and the memory seem to be running at full speed. According to the hosting company the modules are all OK. Could this have something to do with NUMA? It seems like Node Interleaving is disabled on this server. Will enabling it (thus turning off NUMA) make a difference? foo1:~# numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 node 0 size: 8190 MB node 0 free: 7898 MB node 1 cpus: 6 7 8 9 10 11 node 1 size: 12288 MB node 1 free: 12073 MB node 2 cpus: 18 19 20 21 22 23 node 2 size: 12288 MB node 2 free: 12034 MB node 3 cpus: 12 13 14 15 16 17 node 3 size: 8192 MB node 3 free: 8032 MB node distances: node 0 1 2 3 0: 10 20 20 20 1: 20 10 20 20 2: 20 20 10 20 3: 20 20 20 10

  Read the article

• Why wireless adatper stop to work?

  - by AndreaNobili

  today I correctly installed the driver for the TP-LINK TL-WN725N USB wireless adapter on my RaspBerry Pi (I use RaspBian that is a Debian), then I setted up the wifi using the wpa-supplicant as explained in this tutorial: http://www.maketecheasier.com/setup-wifi-on-raspberry-pi/ This worked fine untill this evening. Then suddenly it stopped to work when I try to connect in SSH and the Raspberry is on the wireless (or rather it should be, as this is not in the list of my router's DHCP connected Client) The strange thing is that the USB wirless adapter blink so I think that this is not a driver problem. If I try to connect it by the ethernet I have no problem. It appear in my router's DHCP connected Client and I can connect to it by SSH. When I connect to it using ethernet if I perform an ifconfig command I obtain: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6006 (5.8 KiB) TX bytes:8268 (8.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB) wlan0 Link encap:Ethernet HWaddr e8:94:f6:19:80:4c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So it seems that the wlan0 USB wireless adapter driver is correctly loaded. If I remove the USB wireless adapter and put it again into the USB port, the lasts lines of dmesg log is: [ 20.303172] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.306340] RTL871X: set bssid:00:00:00:00:00:00 [ 20.306726] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9aD\xffffffa7\x1a\xffffffa0\x1a\xffffff8b] fw_state=0x00000008 [ 21.614585] RTL871X: indicate disassoc [ 21.908495] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.006282] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 26.247997] RTL871X: nolinked power save enter As you can see some of these line are related to the RTL871X that is my USB wireless adapter, but I don't know is that these line report an error or if it is all ok. Looking at the adapter status I obtain: pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff As you can see the mode is DORMANT but I think that this is normal because now I am connected using ethernet. I tryied to set up the adapter but it seems that I obtain no result, infact: pi@raspberrypi ~ $ sudo ip link set dev wlan0 up pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff pi@raspberrypi ~ $ sudo ip link set dev wlan0 up This is my /etc/network/interfaces file content and it is ok: auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp and it is the /etc/wpa_supplicant/wpa_supplicant.conf that I think is ok (I did not change it compared to when it worked): ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="MY-NETWORK" psk="mypassword" key_mgmt=WPA-PSK } and infact if I execute a network scan I correctly find MY-NETWORK in the network list,infact: pi@raspberrypi ~ $ sudo iwlist wlan0 scan | grep ESSID ESSID:"TeleTu_74888B0060AD" ESSID:"MY-NETWORK" ESSID:"FASTWEB-1-PT6NtjL4TOSe" ESSID:"DC" So I reboot the system and I remove the ethernet cable but when I try to connect again to my raspberry I obatin the following error message: andrea@andrea-virtual-machine:~$ sudo ssh [email protected] ssh: connect to host 192.168.1.9 port 22: No route to host It seems that it can't connect using wireless. What could be the problem? What am I missing? How can I solve this situation? Tnx

  Read the article

• MySQL 5.5 (Percona) assertion failure log.. what would cause this?

  - by Tom Geee

  256GB, 64 Core , AMD running Ubuntu 12.04 with Percona MySQL 5.5.28. Below is the assertion failure. We just had a second assertion failure (different "in file", position, etc) while running a large set of inserts. After the first failure, MySQL restarted after a reboot only - after continuously looping on the same error after trying to recover. I decided to do a mysqlcheck with -o for optimize. Since these are all Innodb tables (very large tables, 60+GB) this would do an alter table on all tables. In the middle of this , the below assertion failure happened again: 121115 22:30:31 InnoDB: Assertion failure in thread 140086589445888 in file btr0pcur.c line 452 InnoDB: Failing assertion: btr_page_get_prev(next_page, mtr) == buf_block_get_page_no(btr_pcur_get_block(cursor)) InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 03:30:31 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. Please help us make Percona Server better by reporting any bugs at http://bugs.percona.com/ key_buffer_size=536870912 read_buffer_size=131072 max_used_connections=404 max_threads=500 thread_count=90 connection_count=90 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1618416 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x14edeb710 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f687366ce80 thread_stack 0x30000 /usr/sbin/mysqld(my_print_stacktrace+0x2e)[0x7b52ee] /usr/sbin/mysqld(handle_fatal_signal+0x484)[0x68f024] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9cbb23fcb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f9cbaea6425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f9cbaea9b8b] /usr/sbin/mysqld[0x858463] /usr/sbin/mysqld[0x804513] /usr/sbin/mysqld[0x808432] /usr/sbin/mysqld[0x7db8bf] /usr/sbin/mysqld(_Z13rr_sequentialP11READ_RECORD+0x1d)[0x755aed] /usr/sbin/mysqld(_Z17mysql_alter_tableP3THDPcS1_P24st_ha_create_informationP10TABLE_LISTP10Alter_infojP8st_orderb+0x216b)[0x60399b] /usr/sbin/mysqld(_Z20mysql_recreate_tableP3THDP10TABLE_LIST+0x166)[0x604bd6] /usr/sbin/mysqld[0x647da1] /usr/sbin/mysqld(_ZN24Optimize_table_statement7executeEP3THD+0xde)[0x64891e] /usr/sbin/mysqld(_Z21mysql_execute_commandP3THD+0x1168)[0x59b558] /usr/sbin/mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x30c)[0x5a132c] /usr/sbin/mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1620)[0x5a2a00] /usr/sbin/mysqld(_Z24do_handle_one_connectionP3THD+0x14f)[0x63ce6f] /usr/sbin/mysqld(handle_one_connection+0x51)[0x63cf31] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9cbb237e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9cbaf63cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6300004b60): is an invalid pointer Connection ID (thread ID): 876 Status: NOT_KILLED You may download the Percona Server operations manual by visiting http://www.percona.com/software/percona-server/. You may find information in the manual which will help you identify the cause of the crash. 121115 22:31:07 [Note] Plugin 'FEDERATED' is disabled. 121115 22:31:07 InnoDB: The InnoDB memory heap is disabled 121115 22:31:07 InnoDB: Mutexes and rw_locks use GCC atomic builtins .. Then it recovered , without a reboot this time. from the log, what would cause this? I am currently running a dump to see if the problem resurfaces. edit: data partition is all in / since this is a hosted, defaulted file system unfortunately: Filesystem Size Used Avail Use% Mounted on /dev/vda3 742G 445G 260G 64% / udev 121G 4.0K 121G 1% /dev tmpfs 49G 248K 49G 1% /run none 5.0M 0 5.0M 0% /run/lock none 121G 0 121G 0% /run/shm /dev/vda1 99M 54M 40M 58% /boot my.cnf: [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] skip-name-resolve innodb_file_per_table default_storage_engine=InnoDB user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /data/mysql tmpdir = /tmp skip-external-locking key_buffer = 512M max_allowed_packet = 128M thread_stack = 192K thread_cache_size = 64 myisam-recover = BACKUP max_connections = 500 table_cache = 812 table_definition_cache = 812 #query_cache_limit = 4M #query_cache_size = 512M join_buffer_size = 512K innodb_additional_mem_pool_size = 20M innodb_buffer_pool_size = 196G #innodb_file_io_threads = 4 #innodb_thread_concurrency = 12 innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 8M innodb_log_file_size = 1024M innodb_log_files_in_group = 2 innodb_max_dirty_pages_pct = 90 innodb_lock_wait_timeout = 120 log_error = /var/log/mysql/error.log long_query_time = 5 slow_query_log = 1 slow_query_log_file = /var/log/mysql/slowlog.log [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M

  Read the article

• Is it possible to repair a Cisco 3500 XL (3548) switch with POST Error messages?

  - by Alex

  I've got an old Cisco 3500 XL, and it seems to have hardware issues. I've loaded the latest IOS and cleared all config. Does anyone have any experience fixing the switch core? I'm a reasonably competent SMD solderer, can I replace/reflow some chips? I've checked the power supply voltages and it's all within tolerance, and no visible signs of any component damage. Some chips are hot to the touch. I understand that these were EOL as of 2007, but should have a lifetime warranty for the electronics. I don't have a Cisco support contract, so I can't file a ticket. What should I do? Console output: switch: dir flash: Directory of flash:/ 2 -rwx 1811584 <date> c3500xl-c3h2s-mz.120-5.WC17.bin 1799680 bytes available (1812992 bytes used) switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC17.bin"...################################################################################################################################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC17.bin" uncompressed and installed, entry point: 0x3000 executing... Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 13-Feb-07 15:04 by antonino Image text-base: 0x00003000, data-base: 0x00352924 Initializing C3500XL flash... flashfs[1]: 1 files, 1 directories flashfs[1]: 0 orphaned files, 0 orphaned directories flashfs[1]: Total bytes: 3612672 flashfs[1]: Bytes used: 1812992 flashfs[1]: Bytes available: 1799680 flashfs[1]: flashfs fsck took 3 seconds. flashfs[1]: Initialization complete. ...done Initializing C3500XL flash. C3500XL POST: System Board Test: Passed C3500XL POST: Daughter Card Test: Passed C3500XL POST: CPU Buffer Test: Passed C3500XL POST: CPU Notify RAM Test: Passed C3500XL POST: CPU Interface Test: Passed C3500XL POST: Testing Switch Core: Passed Error with Switch Core BIST test Phase 0. Returns: Test Complete Low : 0x0FFFFFFF, Test Complete High : 0xFFFFFFFE Test Phase Low : 0x00000040, Test Phase High : 0x00000000 Test Phase Third : 0x00000000, Test Complete Third : 0x000001F8 C3500XL POST FAILURE: Testing Switch Core: Failed C3500XL POST FAILURE: Testing Buffer Table: Failed C3500XL POST FAILURE: Data Buffer Test: Failed C3500XL POST FAILURE: Configuring Switch Parameters: Failed C3500XL POST FAILURE: Switch Core BIST failed. C3500XL POST FAILURE: Cannot test Modules due to failure of Switch Core POST Del Mar Failure (0th Del Mar): req system failed to init C3500XL POST FAILURE: C3500XL POST FAILURE: ATM: required system failed to init C3500XL POST: Ethernet Controller Test: Passed C3500XL POST FAILURE: MII Test: Failed C3500XL POST FAILURE: Error waiting for Ethernet Controller and SW_PARAMS C3500XL POST FAILURE: Initialization/POST failed C3500XL POST FAILURE: AT: Failing because system POST failed Exception (8192)! Debug Exception (Could be NULL pointer dereference) CPU Register Context: Vector = 0x00002000 PC = 0x000F36F4 MSR = 0x00029200 CR = 0x22000024 LR = 0x000F6964 CTR = 0x001DE46C XER = 0x00000000 R0 = 0x00000000 R1 = 0x004E2580 R2 = 0x00000000 R3 = 0x00000000 R4 = 0x00000001 R5 = 0x00000000 R6 = 0x004E2718 R7 = 0x004E2718 R8 = 0x00000008 R9 = 0x00000000 R10 = 0x0000FFFF R11 = 0x00480000 R12 = 0x42000024 R13 = 0x00000000 R14 = 0x00000000 R15 = 0x00000000 R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x00000000 R20 = 0x00000000 R21 = 0x00000000 R22 = 0x00000000 R23 = 0x00000000 R24 = 0x00000000 R25 = 0x00000020 R26 = 0x004E2718 R27 = 0x004E2718 R28 = 0x00000020 R29 = 0x00002513 R30 = 0x00000001 R31 = 0x00000000 Stack trace: PC = 0x000F36F4, SP = 0x004E2580 Frame 00: SP = 0x004E25A0 PC = 0x40000016 Frame 01: SP = 0x004E2618 PC = 0x000F6964 Frame 02: SP = 0x004E26A8 PC = 0x000F76DC Frame 03: SP = 0x004E26C8 PC = 0x000E8114 Frame 04: SP = 0x004E26F0 PC = 0x001F5BF8 Frame 05: SP = 0x004E2710 PC = 0x001F5CF4 Frame 06: SP = 0x004E2748 PC = 0x0023F4DC Frame 07: SP = 0x004E2750 PC = 0x0023E650 Frame 08: SP = 0x004E27C8 PC = 0x0023E89C Frame 09: SP = 0x004E27E0 PC = 0x0028AF34 Frame 10: SP = 0x004E27E8 PC = 0x001E38F8 Frame 11: SP = 0x004E2808 PC = 0x001E39A8 Frame 12: SP = 0x004E2820 PC = 0x0014E220 Frame 13: SP = 0x004E28C8 PC = 0x0014E39C Frame 14: SP = 0x00000000 PC = 0x001EB510

  Read the article

• Setting up a minimalist linux environment

  - by Nate

  All right, I've been messing around with various linux distros and a variety of window managers (I seem to change operating systems like most people change their pants), and I've gotten to the point where I know what I want but I'm not sure the best way to set it up. Here's what I want out of my programming machine: I don't want a status bar. I don't want a menu bar. When there are no windows open, the screen should show my desktop background and nothing else. I'll use alt+f2 to run things, and my shell prompt will tell me my battery life and the time. I'll open network controls and volume controls when I need them, no need for them to pollute the screen all the time. I want a good, simple terminal emulator. I'll be using it with tmux. It should have no title bar and, if possible, no app frame. It's ok if I have to run it in full screen mode to remove the app frame, but only if it still plays nicely with alt-tab and workspaces. I want a dirt-simple window manager. It needs to support transparency: I don't have a lot of screen real-estate and I often overlay the terminal on the browser and type out commands. I don't want a tiling-only system, for the above reason. Bonus points for tiling and overlaying. I'd like multiple workspaces. I prefer to have one gui per workspace. If I could 'pin' the terminal emulator to always show up in each workspace, that's bonus points. If not, I can have a terminal emulator in each workspace attached to the same tmux instance. I'd like a way to set up a keypress that always takes me to the current open terminal emulator. Currently, 90% of the time I only have two windows open: the terminal emulator and something else. In this scenario, alt-tab works like a toggle between the two. If I have another gui open (like a developer window with a web browser), this throws a wrench in my workflow. I'd like a way to assign, for example, 'super-T' to switch to the first open terminal emulator. Bonus points if I can also assign 'super-B' (or whatever) to switch to the first open browser. So far I've been messing around with gnome and tweaking it heavily to match my preferences, but that seems like overkill and I can never get it quite right. I've toyed with xmonad, but it's more for handling many windows, and I usually only have the two. and am considering fluxbox, but I was wondering if any of your minimalists out there had suggestions that might better match my workflow. I'm sick of fighting the window manager, I just want it to get out of my way. Edit: To make things clear, I am not considering switching to a mac/windows environment. I find programming in windows to be a bore, and I have no interest in buying new (read: mac) hardware. Thanks! -Nate

  Read the article

• 2 drives, slow software RAID1 (md)

  - by bart613

  Hello, I've got a server from hetzner.de (EQ4) with 2* SAMSUNG HD753LJ drives (750G 32MB cache). OS is CentOS 5 (x86_64). Drives are combined together into two RAID1 partitions: /dev/md0 which is 512MB big and has only /boot partitions /dev/md1 which is over 700GB big and is one big LVM which hosts other partitions Now, I've been running some benchmarks and it seems like even though exactly the same drives, speed differs a bit on each of them. # hdparm -tT /dev/sda /dev/sda: Timing cached reads: 25612 MB in 1.99 seconds = 12860.70 MB/sec Timing buffered disk reads: 352 MB in 3.01 seconds = 116.80 MB/sec # hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 25524 MB in 1.99 seconds = 12815.99 MB/sec Timing buffered disk reads: 342 MB in 3.01 seconds = 113.64 MB/sec Also, when I run eg. pgbench which is stressing IO quite heavily, I can see following from iostat output: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 231.40 0.00 298.00 0.00 9683.20 32.49 0.17 0.58 0.34 10.24 sdb 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 231.40 0.00 301.80 0.00 9740.80 32.28 14.19 51.17 3.10 93.68 md1 0.00 0.00 0.00 529.60 0.00 9692.80 18.30 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.60 0.00 4.80 8.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 529.00 0.00 9688.00 18.31 24.51 49.91 1.81 95.92 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 152.40 0.00 330.60 0.00 5176.00 15.66 0.19 0.57 0.19 6.24 sdb 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 152.40 0.00 326.20 0.00 5118.40 15.69 19.96 55.36 3.01 98.16 md1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 482.80 0.00 5166.40 10.70 30.19 56.92 2.05 99.04 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 181.64 0.00 324.55 0.00 5445.11 16.78 0.15 0.45 0.21 6.87 sdb 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 sdb1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sdb2 0.00 181.84 0.00 328.54 0.00 5493.01 16.72 18.34 61.57 3.01 99.00 md1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-1 0.00 0.00 0.00 506.39 0.00 5477.05 10.82 28.77 62.15 1.96 99.00 And this is completely getting me confused. How come two exactly the same specced drives have such a difference in write speed (see util%)? I haven't really paid attention to those speeds before, so perhaps that something normal -- if someone could confirm I would be really grateful. Otherwise, if someone have seen such behavior again or knows what is causing such behavior I would really appreciate answer. I'll also add that both "smartctl -a" and "hdparm -I" output are exactly the same and are not indicating any hardware problems. The slower drive was changed already two times (to new ones). Also I asked to change the drives with places, and then sda were slower and sdb quicker (so the slow one was the same drive). SATA cables were changed two times already.

  Read the article

• Incorrect gzipping of http requests, can't find who's doing it

  - by Ned Batchelder

  We're seeing some very strange mangling of HTTP responses, and we can't figure out what is doing it. We have an app server handling JSON requests. Occasionally, the response is returned gzipped, but with incorrect headers that prevent the browser from interpreting it correctly. The problem is intermittent, and changes behavior over time. Yesterday morning it seemed to fail 50% of the time, and in fact, seemed tied to one of our two load-balanced servers. Later in the afternoon, it was failing only 20 times out of 1000, and didn't correlate with an app server. The two app servers are running Apache 2.2 with mod_wsgi and a Django app stack. They have identical Apache configs and source trees, and even identical packages installed on Red Hat. There's a hardware load balancer in front, I don't know the make or model. Akamai is also part of the food chain, though we removed Akamai and still had the problem. Here's a good request and response: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Length: 47 < Content-Type: application/x-javascript < Connection: keep-alive < Vary: Accept-Encoding < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 {"msg": "", "status": "OK", "printer_name": ""} And here's a bad one: * Connected to example.com (97.7.79.129) port 80 (#0) > POST /claim/ HTTP/1.1 > User-Agent: curl/7.19.7 (x86_64-pc-linux-gnu) libcurl/7.19.7 OpenSSL/0.9.8k zlib/1.2.3.3 libidn/1.15 > Host: example.com > Accept: */* > Referer: http://example.com/apps/ > Accept-Encoding: gzip,deflate > Content-Length: 29 > Content-Type: application/x-www-form-urlencoded > } [data not shown] < HTTP/1.1 200 OK < Server: Apache/2 < Content-Language: en-us < Content-Encoding: identity < Content-Type: application/x-javascript < Content-Encoding: gzip < Content-Length: 59 < Connection: keep-alive < Vary: Accept-Encoding < X-N: S < { [data not shown] * Connection #0 to host example.com left intact * Closing connection #0 ?V?-NW?RPR?QP*.I,)-???A??????????T??Z? ??/ There are two things to notice about the bad response: It has two Content-Encoding headers, and the browsers seem to use the first. So they see an identity encoding header, and gzipped content, so they can't interpret the response. The bad response has an extra "X-N: S" header. Perhaps if I could find out what intermediary adds "X-N: S" headers to responses, I could track down the culprit...

  Read the article

• Yet again: "This device can perform faster" (Samsung Galaxy Tab 2)

  - by Mike C

  I've been doing a lot of research with no reasonable solution. Please excuse the length of my post. When I plug my Galaxy Tab 2 (7" / Wi-Fi only / Android ICS) into my Windows 7 64-bit machine, I (almost always) get this warning popup that "This device can perform faster." And in fact, transfers onto the Tab in this mode are slow. The two times I've been able to get a high-speed connection, the transfer has occurred at the expected speed. I just don't know what to do to get that high-speed transfer. (The first time I did, it was the first time I connected the Tab; the second time I did, I was fiddling around and unplugging/plugging in again.) That popup is telling me that the device is USB2, but that it thinks I've connected to a USB1 port. In fact, every USB port (there are ten) on this system is USB2. It's an ASUS M3A78-EMH mobo from late 2008. I'm not sure what the chipset is; the CPU is an AMD Athlon 4850e, but I've seen this message reported for non-AMD systems. (Every mobo reference I've seen in reports on this has been for Asus, but of course most reporters aren't reporting that info at all.) The Windows 7 installation is just a couple weeks old (I had a disk crash) but I saw the same warning on the WinXP/64 that was installed previously. In Device Manager, there are two "Standard Enhanced PCI to USB Host Controller" nodes which are the actual high-speed controllers. There are also five "Standard OpenHCD USB Host Controller" nodes, which I have determined are virtual USB1 controllers embedded in the "Enhanced" controllers. (In Device Manager, I'm using View|Devices by Connection.) My high-speed thumb drives, external disks, and iPod all show up as subnodes of the "Enhanced" controllers; the keyboard, mouse, and USB speakers under the "OpenHCD" ones -- and this is true no matter which ports these devices are plugged into. The Tab shows up under an OpenHCD node, unsurprisingly. It appears as a threesome: a top-level "Mobile USB Composite device" with two subs: "Galaxy Tab 2" and "Mobile USB Modem." (I have no idea what the modem device implies or how I might use it, but I don't care about it either: I just want the Tab to reliably connect at high speed.) On the Tab, the USB support has a switch between PTP and MTP, the latter being the default, and the preferred mode for me (as I'm usually hooking it up for music synch). I have tried, however, connecting it as PTP, and it still connects as USB 1. (As PTP, only the "Galaxy Tab 2" device appears -- no Composite, no Modem.) If it's plugged in as MTP and I change the setting to PTP, Windows unloads and reloads the device, and voila: The Tab appears under an "Enhanced" node, but eventually re-loads again to show a exclamation icon on the device; Properties then shows "This device cannot start." Same response if I plug it in as PTP and then change to MTP; in this case, only the Tab itself shows the exclamation, not the other two devices. One thing I have not tried, and really would prefer to avoid, is installing the "beta" chipset driver available on the Asus website, which is dated 2009. Windows tells me it has the most up-to-date drivers for the Tab, and for the chipset, and I'm inclined to believe that. I suspect the problem is with the Samsung drivers, or possibly the hardware. One suggestion I saw elsewhere which might, possibly, pertain is to ensure the USB cable is properly shielded; however, the Tab has one of those misbegotten 30-pin, not-quite-an-iPod connectors; I don't know if I could find a 3rd party one. It seems unlikely that this cable is improperly shielded, tho. (Is there a way to test that?) So, my question is: does anyone know how to get this working as one might reasonably expect it to?

  Read the article

• SharePoint Upgrade Global Nav Quirks?

  - by elorg

  We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

  Read the article

• Install Intel USB 3.0 eXtensible Host Controller Driver for Windows Server 2008 R2 x64

  - by ffrugone

  According to Intel and Dell, by board is technically a 'desktop' board and they therefore do not support Intel USB 3.0 eXtensible Host Controller drivers for Windows Server 2008 (R2 x64). I'm trying to find a workaround. I found an entry on someone who tried to tackle this, but I can't make his fix work for me. Below, I have copied both his entry, and my reply. I'm a loyal stackoverflow user, and hopefully the people here at serverfault can help me: anyforumuser Re: GA-Z77X-UD5H USB3 Drivers not installing? « Reply #6 on: July 05, 2012, 04:12:59 am » Thanks to JoeMiner , his process for the network drivers gave me the clues to figure out to get the USB3 drivers working. I have got the intel USB3 drivers working at full speed in win server 2008r2 you have to edit the following file : 1. mup.xml in change the "Windows7" to "W2K8" 2. in setup.if2 under [groups] line starting with "HSCSDRIVER " change the "IsOS( ... )" entry to "IsOS(WIN2008_R2,WIN2008_R2_MAXSP)" inf files for all copy the content of the [Intel.NTAMD64.6.1] group to the [Intel.NTAMD64.6.2] group driver folders. here i am not entirely sure which is correct so there are some double up's. in the drivers folder copy the "Win7" folder to "win2008" , "win2008_r2" and "x64" ie your drivers folder should now contain the "win2008" , "win2008_r2" and "x64" folders and they contain contents of the win7 folder (the inf files should of already been fixed) Run install , It should install properly and work now. You will have to reboot If it doesn't work remove the intel usb3 controllers from device manager and get it to "scan for hardware changes" Good luck !!! benevida Re: GA-Z77X-UD5H Intel Network Drivers not installing? « Reply #7 on: August 13, 2012, 02:21:14 pm » Thank you anyforumuser! A process for getting this driver installed was exactly what I needed. However, I've hit a snag. I believe I've followed every step exactly as written, but I'm getting an error during installation. I get the message "One or more files that are required for installation are either missing or corrupted. Setup will exit." Behind the error, the 'Setup Progress' shows the current step as "Copying File: C:\Program Files (x86)\Intel\Intel(R) USB 3.0 eXtensible Host Controller Driver\Drivers\iusb3xhc.man". I've checked the installation files, and iusb3xhc.man seems to be a viable file in all of the Windows 2008 sub-directories of the Drivers folder. Therefore I don't see how the file could be missing and I doubt that it is corrupted, (although it does NOT exist in the \Drivers\HCSwitch folder). I opened 'Setup.if2', and there are two aspects to the step of copying iusb3xhc.man that caught my eye. First, the steps immediately preceding are set to 'error=ignore'. If they hadn't completed successfully, this is the first step where we'd hear about it. Second, this is the first step where the relative path '%source%\drivers\%_os%\%_ia%\' is used. If I haven't named the Windows 2008 sub-directories correctly, I could see where things are fouling up. In any event, if someone could take a look and make suggestions I'd appreciate it. Thank you.

  Read the article

• Strange Upload Problem on Hyper-V

  - by Ring0

  Hi, This one is driving me totally nuts. I have being trying to upload a file to www.virustotal.com (its a harmless exe I have since found out - DiskWipe.exe from diskwipe.org). Using IE8. From Win 7 and Win 2008 R2 Datacenter (which I select to boot from vhd's) onto my main machine hardware, and also on another Win 7 PC elsewhere on my network, when I upload the file to virustotal.com it works perfectly. So, using my native NIC's everything is fine. Using another machine also perfect. Right. OK, from my boot menu the default is my main development machine - the one I'm typing on now. This runs on the metal and has Hyper-V role and I have some guests. All guests are not running. Amazingly, from my console (root partition to be exact) or any guest OS 2003 /XP / 2008 R2 etc. My upload to virustotal.com slows at 32% then HANGS at 38.something% & never finishes!! Here is the kicker. I have another box (my main server) running Hyper-V on the metal and three live guests. Identical H/W to my main dev machine in another room. (Except OS is Datacenter - Mine is Enterprise). If I try and upload from its bare metal console or any guest this file to virustotal.com using IE8 it stops exactly in the same place!! As for "steps I have tried etc." are kind-of blown out of the water as my server box is doing the precise same thing as the machine in my room here. OK, comonalities: Mobo: Gigabyte GA-X58-UD5, 12GB Kingston RAM, Corei7 920 4 cores hyperthreading = 8 & Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC's. All 3 machines have this same motherboard - revision F11 Bios, all have 12GB RAM, all have the Realtek Nic's. All x64 by the way as I mentioned before I have a Win 7 box also with the UD5 m/Board, 12 GB RAM - bit of an overkill. :-) All these machines when NOT running Hyper-V can upload this file. Perhaps you may like to try it on a Hyepr-v (2008 R2) yourselves with IE8 and the desktop experience is on. See if it works or fails for you. Root OS or any guest. So, looking like its the NIC + Hyper-V = Cannot upload this file (any file I must add.) Realtek Nic is Ver 7.002.1125.2008. Using IE8 I see in the nic settings there are the usual parameters for Jumbo frames / Checksum offloading etc. several others. Should I fiddle with these? I ran Netmon 3.3 in a guest and the TCP session halted as the upload failed. I suppose I could study that further. I dont have Netmon on the root partition machine (yet)! All OS's fully patched - including todays defender files. My box running Office 2007 - but identical server in another room is not. Also, if I fire up a VPN to a distant client and do the upload it works! Of course its a different network path. Suggestions welcome please. If I left out anything important - please yell at me. Many Thanks,

  Read the article

• Neighbour table overflow on Linux hosts related to bridging and ipv6

  - by tim

  Note: I already have a workaround for this problem (as described below) so this is only a "want-to-know" question. I have a productive setup with around 50 hosts including blades running xen 4 and equallogics providing iscsi. All xen dom0s are almost plain Debian 5. The setup includes several bridges on every dom0 to support xen bridged networking. In total there are between 5 and 12 bridges on each dom0 servicing one vlan each. None of the hosts has routing enabled. At one point in time we moved one of the machines to a new hardware including a raid controller and so we installed an upstream 3.0.22/x86_64 kernel with xen patches. All other machines run debian xen-dom0-kernel. Since then we noticed on all hosts in the setup the following errors every ~2 minutes: [55888.881994] __ratelimit: 908 callbacks suppressed [55888.882221] Neighbour table overflow. [55888.882476] Neighbour table overflow. [55888.882732] Neighbour table overflow. [55888.883050] Neighbour table overflow. [55888.883307] Neighbour table overflow. [55888.883562] Neighbour table overflow. [55888.883859] Neighbour table overflow. [55888.884118] Neighbour table overflow. [55888.884373] Neighbour table overflow. [55888.884666] Neighbour table overflow. The arp table (arp -n) never showed more than around 20 entries on every machine. We tried the obvious tweaks and raised the /proc/sys/net/ipv4/neigh/default/gc_thresh* values. FInally to 16384 entries but no effect. Not even the interval of ~2 minutes changed which lead me to the conclusion that this is totally unrelated. tcpdump showed no uncommon ipv4 traffic on any interface. The only interesting finding from tcpdump were ipv6 packets bursting in like: 14:33:13.137668 IP6 fe80::216:3eff:fe1d:9d01 > ff02::1:ff1d:9d01: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:9d01, length 24 14:33:13.138061 IP6 fe80::216:3eff:fe1d:a8c1 > ff02::1:ff1d:a8c1: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:a8c1, length 24 14:33:13.138619 IP6 fe80::216:3eff:fe1d:bf81 > ff02::1:ff1d:bf81: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:bf81, length 24 14:33:13.138974 IP6 fe80::216:3eff:fe1d:eb41 > ff02::1:ff1d:eb41: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff1d:eb41, length 24 which placed the idea in my mind that the problem maybe related to ipv6, since we have no ipv6 services in this setup. The only other hint was the coincidence of the host upgrade with the beginning of the problems. I powered down the host in question and the errors were gone. Then I subsequently took down the bridges on the host and when i took down (ifconfig down) one particularly bridge: br-vlan2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:120 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5286 (5.1 KiB) TX bytes:726 (726.0 B) eth0.2159 Link encap:Ethernet HWaddr 00:26:b9:fb:16:2c inet6 addr: fe80::226:b9ff:fefb:162c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1801 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:126228 (123.2 KiB) TX bytes:1464 (1.4 KiB) bridge name bridge id STP enabled interfaces ... br-vlan2158 8000.0026b9fb162c no eth0.2158 br-vlan2159 8000.0026b9fb162c no eth0.2159 The errors went away again. As you can see the bridge holds no ipv4 address and it's only member is eth0.2159 so no traffic should cross it. Bridge and interface .2159 / .2157 / .2158 which are in all aspects identical apart from the vlan they are connected to had no effect when taken down. Now I disabled ipv6 on the entire host via sysctl net.ipv6.conf.all.disable_ipv6 and rebooted. After this even with bridge br-vlan2159 enabled no errors occur. Any ideas are welcome.

  Read the article

• Expert iptables help needed?

  - by Asad Moeen

  After a detailed analysis, I collected these details. I am under a UDP Flood which is more of application dependent. I run a Game-Server and an attacker is flooding me with "getstatus" query which makes the GameServer respond by making the replies to the query which cause output to the attacker's IP as high as 30mb/s and server lag. Here are the packet details, Packet starts with 4 bytes 0xff and then getstatus. Theoretically, the packet is like "\xff\xff\xff\xffgetstatus " Now that I've tried a lot of iptables variations like state and rate-limiting along side but those didn't work. Rate Limit works good but only when the Server is not started. As soon as the server starts, no iptables rule seems to block it. Anyone else got more solutions? someone asked me to contact the provider and get it done at the Network/Router but that looks very odd and I believe they might not do it since that would also affect other clients. Responding to all those answers, I'd say: Firstly, its a VPS so they can't do it for me. Secondly, I don't care if something is coming in but since its application generated so there has to be a OS level solution to block the outgoing packets. At least the outgoing ones must be stopped. Secondly, its not Ddos since just 400kb/s input generates 30mb/s output from my GameServer. That never happens in a D-dos. Asking the provider/hardware level solution should be used in that case but this one is different. And Yes, Banning his IP stops the flood of outgoing packets but he has many more IP-Addresses as he spoofs his original so I just need something to block him automatically. Even tried a lot of Firewalls but as you know they are just front-ends to iptables so if something doesn't work on iptables, what would the firewalls do? These were the rules I tried, iptables -A INPUT -p udp -m state --state NEW -m recent --set --name DDOS --rsource iptables -A INPUT -p udp -m state --state NEW -m recent --update --seconds 1 --hitcount 5 --name DDOS --rsource -j DROP It works for the attacks on un-used ports but when the server is listening and responding to the incoming queries by the attacker, it never works. Okay Tom.H, your rules were working when I modified them somehow like this: iptables -A INPUT -p udp -m length --length 1:1024 -m recent --set --name XXXX --rsource iptables -A INPUT -p udp -m string --string "xxxxxxxxxx" --algo bm --to 65535 -m recent --update --seconds 1 --hitcount 15 --name XXXX --rsource -j DROP They worked for about 3 days very good where the string "xxxxxxxxx" would be rate-limited, blocked if someone flooded and also didn't affect the clients. But just today, I tried updating the chain to try to remove a previously blocked IP so for that I had to flush the chain and restore this rule ( iptables -X and iptables -F ), some clients were already connected to servers including me. So restoring the rules now would also block some of the clients string completely while some are not affected. So does this mean I need to restart the server or why else would this happen because the last time the rules were working, there was no one connected?

  Read the article

• apache webserver unresponsible with server-status showing all child processes waiting for connection

  - by Jeff

  My setup: i have 3 nearly identical webserver machines serving the same high loaded dynamic website with simple load balancing over dns. The service has been working for over two ears with the same apache config. apache2, php5, ubuntu 8.04 linux 2.6.24-29-server My problem: since about two weeks i'm experiencing problems with this config. Nearly every day i have one small moment about 5 minutes, in which the website is unreachable. I'm still able to login to the servers over ssh. If i run htop, i see the machine simply doing nothing. i have about 1000 apache processes running, but no cpu activity. i've used the apache mod_status to debug this situation. the process scoreboard looks like this: _C.___K_______________________R._______.__K_K____K___C_______.__ _______C__________.___________________________________.________C _.____K__________K___K_WK_____._K_____________________________._ W______K__________K________.____________________._______C_______ _C_.__K__K____.._.._____________________________________C_______ _R___________K___.______C________.C_________.______._____C______ ____________KKC____K_____K__WC_________________C_____.__.____.__ _____________________C_________K______.____C______._____________ _.___C____.___.___________________________.K______.____K________ W__.___________________C.__.____K________K_______R_._.__._______ __C__C_.__________C__C_______._____W______________C_.___C_______ ____.______C_____________C________.____C____________.________._K __.__________.K_____________K_________._____C____.K__________KW_ __K.W________R_________._______.___W___________.____.__K_____W__ W___.___..________W____K Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process So the most of the processes are just waiting for connection. after about 5 minutes the situation will return to normal: i have lot least processes on every machine, the most workers have the "."-status (meaing they are open to process a request) and of course the website is reachable! so i'm trying to find something in the logs, but there is simply nothing... the apache access log is silent for about 4 minutes, the same is for the error log. i also can not figure out anything wrong in other system logs. the situation is the same on all 3 webservers (all of them have this load peak and unresposibility at the same time), so i do not thing this is hardware related. but i think, this might be related to some network (tcp) issue. any ideas? EDIT: some more information, that i have just discovered: it has just happened again. and i was able to verify that i'm also not able to connect locally when this problem occurs. i have made some connection statistics with the following command after it happend netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 109 CLOSE_WAIT 2652 ESTABLISHED 2 FIN_WAIT1 11 LAST_ACK 12 LISTEN 91 SYN_RECV 1 SYN_SENT 16 TIME_WAIT If i execute the same command some time later, i have something like this: 4 CLOSING 108 ESTABLISHED 18 FIN_WAIT1 182 FIN_WAIT2 37 LAST_ACK 12 LISTEN 50 SYN_RECV 11276 TIME_WAIT So in the normal situation i have only 100-200 open connections by clients beeing handled by apache in this moment. when i have this "crash", i have a lot more connections. what is the best way to analyse this? EDIT2: the important lines in apache2.conf are: KeepAlive On MaxKeepAliveRequests 20 KeepAliveTimeout 1 <IfModule mpm_prefork_module> ServerLimit 920 StartServers 30 MinSpareServers 80 MaxSpareServers 120 MaxClients 920 MaxRequestsPerChild 700 </IfModule> it is an apache2 prefork with php_mod. the server has 8GB ram and a 4gb swap partition.

  Read the article

• hostapd running on Ubuntu Server 13.04 only allows single station to connect when using wpa

  - by user450688

  Problem Only a single station can connect to hostapd at a time. Any single station can connect (W8, OSX, iOS, Nexus) but when two or more hosts are connected at the same time the first client loses its connectivity. However there are no connectivity issues when WPA is not used. Setup Linux (Ubuntu server 13.04) wireless router (with separate networks for wired WAN, wired LAN, and Wireless LAN. iptables-save output: *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.0.0/24 -o p4p1 -j MASQUERADE -A POSTROUTING -s 10.0.1.0/24 -o p4p1 -j MASQUERADE COMMIT *mangle :PREROUTING ACCEPT [13:916] :INPUT ACCEPT [9:708] :FORWARD ACCEPT [4:208] :OUTPUT ACCEPT [9:3492] :POSTROUTING ACCEPT [13:3700] COMMIT *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [9:3492] -A INPUT -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i p4p1 -p tcp -m tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i wlan0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A FORWARD -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -j ACCEPT -A FORWARD -i wlan0 -j ACCEPT -A FORWARD -i lo -j ACCEPT COMMIT /etc/hostapd/hostapd.conf #Wireless Interface interface=wlan0 driver=nl80211 ssid=<removed> hw_mode=g channel=6 max_num_sta=15 auth_algs=3 ieee80211n=1 wmm_enabled=1 wme_enabled=1 #Configure Hardware Capabilities of Interface ht_capab=[HT40+][SMPS-STATIC][GF][SHORT-GI-20][SHORT-GI-40][RX-STBC12] #Accept all MAC address macaddr_acl=0 #Shared Key Authentication wpa=1 wpa_passphrase=<removed> wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP ###IPad Connectivevity Repair ieee8021x=0 eap_server=0 Wireless Card #lshw output product: RT2790 Wireless 802.11n 1T/2R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 00 serial: <removed> width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=rt2800pci driverversion=3.8.0-25-generic firmware=0.34 ip=10.0.1.254 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn #iw list output Band 1: Capabilities: 0x272 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS.

  Read the article

• Windows XP Video Configuration Issues

  - by Matt

  Recently I had my motherboard burn out on me. Needing the machine for work, I purchased a different motherboard and installed that. Generally a reinstall of windows is good at that point but I am not in a position to do that so I just decided I would live with it for now. When I can log-in, everything works fine, what doesn't is getting to the log-in prompt to begin with. Basically when I first installed the new mobo, every time I rebooted the machine, I would not get the windows login prompt. One of the monitors would receive a signal but the screen would be black. Moving the mouse would not show the cursor and hitting the up arrow key and typing my password and hitting enter (which will normally log you in without mouse) wouldn't change anything. I would then change the monitor configuration around (2 lcd's and a crt) and reboot and at least one of the monitors would work and display the login prompt. I could then go into display properties and turn on the other monitors. However if I rebooted again, I would get the black screen on one monitor again. I would then have to change the configuration again to one not used before and I could re-do the manual setup at that point. I think windows saves the configurations so I had to keep giving it new ones. Needless to say I've been trying to not turn off my machine. Early this week I actually got the prompt to come up without playing musical monitors. Thinking everything was getting better, I found no harm in rebooting to install the latest windows updates. Boy was I wrong. Now no matter what I do I can't get a windows log-in prompt to display. I've tried almost every conceivable combination. The new mobo has onboard video so I set that in the bios (yea bios screen always displays fine, its not until windows boots that there is a problem) to be the primary video. Still no luck. I have two other graphics cards in the machine which I'm using. Tried all kinds of configurations between those and on-board but still get this black screen of death. I read somewhere that deleting the video drivers would reset the configurations. I logged into safe mode (which works on one monitor), and uninstalled the display drivers. Still no luck and when I booted back into safe mode, it wanted to install new hardware and the display adapters weren't there as expected. Anyone have any ideas? A fresh install would be a pain and I might be getting my old board back from RMA soon so not sure I want to go through with that just yet. Only thing I can think of is to continue to try other combinations like physically removing the graphics cards. They are both EVGA 8600 cards and the windows boot screen does display fwiw.

  Read the article

• SmartOS reboots spontaneously

  - by Alex

  I run a SmartOS system on a Hetzner EX4S (Intel Core i7-2600, 32G RAM, 2x3Tb SATA HDD). There are six virtual machines on the host: [root@10-bf-48-7f-e7-03 ~]# vmadm list UUID TYPE RAM STATE ALIAS d2223467-bbe5-4b81-a9d1-439e9a66d43f KVM 512 running xxxx1 5f36358f-68fa-4351-b66f-830484b9a6ee KVM 1024 running xxxx2 d570e9ac-9eac-4e4f-8fda-2b1d721c8358 OS 1024 running xxxx3 ef88979e-fb7f-460c-bf56-905755e0a399 KVM 1024 running xxxx4 d8e06def-c9c9-4d17-b975-47dd4836f962 KVM 4096 running xxxx5 4b06fe88-db6e-4cf3-aadd-e1006ada7188 KVM 9216 running xxxx5 [root@10-bf-48-7f-e7-03 ~]# The host reboots several times a week with no crash dump in /var/crash and no messages in the /var/adm/messages log. Basically /var/adm/messages looks like there was a hard reset: 2012-11-23T08:54:43.210625+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T09:14:43.187589+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T09:34:43.165100+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T09:54:43.142065+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T10:14:43.119365+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T10:34:43.096351+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T10:54:43.073821+00:00 10-bf-48-7f-e7-03 rsyslogd: -- MARK -- 2012-11-23T10:57:55.610954+00:00 10-bf-48-7f-e7-03 genunix: [ID 540533 kern.notice] #015SunOS Release 5.11 Version joyent_20121018T224723Z 64-bit 2012-11-23T10:57:55.610962+00:00 10-bf-48-7f-e7-03 genunix: [ID 299592 kern.notice] Copyright (c) 2010-2012, Joyent Inc. All rights reserved. 2012-11-23T10:57:55.610967+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: lgpg 2012-11-23T10:57:55.610971+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: tsc 2012-11-23T10:57:55.610974+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: msr 2012-11-23T10:57:55.610978+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: mtrr 2012-11-23T10:57:55.610981+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: pge 2012-11-23T10:57:55.610984+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: de 2012-11-23T10:57:55.610987+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: cmov 2012-11-23T10:57:55.610995+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: mmx 2012-11-23T10:57:55.611000+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: mca 2012-11-23T10:57:55.611004+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: pae 2012-11-23T10:57:55.611008+00:00 10-bf-48-7f-e7-03 unix: [ID 223955 kern.info] x86_feature: cv8 The problem is that sometimes the host loses the network interface on reboot so we need to perform a manual hardware reset to bring it back. We do not have physical or virtual access to the server console - no KVM, no iLO or anything like this. So, the only way to debug is to analyze crash dumps/log files. I am not a SmartOS/Solaris expert so I am not sure how to proceed. Is there any equivalent of Linux netconsole for SmartOS? Can I just redirect the console output to the network port somehow? Maybe I am missing something obvious and crash information is located somewhere else.

  Read the article

• How to Eliminate Tape Backup and Off-site Storage Service?

  - by Daniel Lucas

  PLEASE READ UPDATE AT THE BOTTOM. THANKS! ;) Environment Info (all Windows): 2 sites 30 servers site #1 (3TB of backup data) 5 servers site #2 (1TB of backup data) MPLS backbone tunnel connecting site #1 and site #2 Current Backup Process: Online Backup (disk-to-disk) Site #1 has a server running Symantec Backup Exec 12.5 with four 1TB USB 2.0 disks. BE jobs for full backups run nightly on all servers in site #1 to these disks. Site #2 backs up to a central file server there using software they already had when we purchased them. A BE job pulls that data nightly to site #1 and stores them on said disks. Off-site Backup (tape) Connected to our backup server is a tape drive. BE backs up the external disks to tape once a week which gets picked up by our off-site storage company. Obviously we rotate two tape libraries, one is always here and one is always there. Requirements: Eliminate the need for tape and off-site storage service by doing disk-to-disk at each site and replicating site #1 to site #2 and vice versa. Software based solution as hardware options have been too pricey (ie, SonicWall, Arkeia). Agents for Exchange, SharePoint, and SQL. Some Ideas So Far: Storage DroboPro at each site with an initial 8TB of storage (these are expandable up to 16TB at present). I like these because they are rackmountable, allow disparate drives, and have iSCSI interfaces. They are relatively cheap too. Software Symantec Backup Exec 12.5 already has all the agents and licenses we need. I'd like to keep using it unless there is a better solution, similarly priced, that does everything BE does plus deduplication and replication. Server Because there is no more need for a SCSI adapter (for tape drive) we are going to virtualize our backup server as it is currently the only physical machine save for SQL boxes. Problems: When replicating between sites we want as little data as possible to go across the pipe. There is no deduplication or compression in what I have laid out here so far. The files being replicated are BE's virtual tape libraries from our disk-to-disk backup. Because of this each of those huge files will go across the wire every week because they change every day. And Finally, the Question: Is there any software out there that does deduplication, or at least compression, to handle just our site-to-site replication? Or, looking at our setup, is there any other solution that I am missing that might be cheaper, faster, better? Thanks. Sorry so long. UPDATE 2: I've set a bounty on this question to get it more attention. I'm looking for software that will handle replication of data between two sites using the least amount of data possible (either compression, deduplication, or some other method). Something similar to rsync would work but it needs to be native to Windows and not a port involving shenanigans to get up and running. Prefer a GUI based product and I don't mind shelling out a few bones if it works. Please, answers that meet the above criteria only. If you don't think one exists or if you think I'm being to restrictive keep it to yourself. If after seven days there is no answer at all, so be it. Thanks again everyone. UPDATE 2: I really appreciate everyone coming forward with suggestions. There is no way for me to try all of these before the bounty expires. For now I'm going to let this bounty run out and whoever has the most votes will get the 100 rep points. Thanks again!

  Read the article

• All my sites are 403 but the server is running. Errors on startup

  - by Craig

  We gave access to a contractor to install a firewall and somehow while he was doing it he fracked something up. Everything went off-line about 24 hours ago and we are effectively out of business until I solve this and the person who messed up the thing is not returning calls. I found a few errors. First, I'm not a server guy - I can look at log files and normally everything runs fine. All 'services' are running according to 1and1 server monitoring and mail is being delivered just fine. The whole thing was off-line until I (probably stupidly) updated the kernel from 6.2 to 6.3 this morning and I got everything back except the http access. All the domains (~200 of them) are returning a 403 error and nothing is recorded in the access log. On every restart I see this error in the messages log file: init: Failed to spawn ttyS0 main process: unable to execute: No such file or directory and a little later these: kernel: WARNING: at kernel/sched.c:5914 thread_return+0x232/0x79d() (Not tainted) kernel: Hardware name: X9SCL/X9SCM kernel: Modules linked in: xt_iprange iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ext4 jbd2 serio_raw i2c_i801 i2c_core sg iTCO_wdt iTCO_vendor_support e1000e ext3 jbd mbcache raid1 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] kernel: Pid: 367, comm: md3_raid1 Not tainted 2.6.32-220.2.1.el6.x86_64 #1 kernel: Call Trace: kernel: [<ffffffff81069997>] ? warn_slowpath_common+0x87/0xc0 kernel: [<ffffffff810699ea>] ? warn_slowpath_null+0x1a/0x20 kernel: [<ffffffff814eccc5>] ? thread_return+0x232/0x79d kernel: [<ffffffff8126a4d9>] ? cpumask_next_and+0x29/0x50 kernel: [<ffffffff813e9c05>] ? md_super_wait+0x55/0x90 kernel: [<ffffffff81090a10>] ? autoremove_wake_function+0x0/0x40 kernel: [<ffffffff813ebf46>] ? md_update_sb+0x206/0x3f0 kernel: [<ffffffff813ee922>] ? md_check_recovery+0x3f2/0x6d0 kernel: [<ffffffffa005b129>] ? raid1d+0x49/0x1050 [raid1] kernel: [<ffffffff814ed985>] ? schedule_timeout+0x215/0x2e0 kernel: [<ffffffff814ef447>] ? _spin_unlock_irqrestore+0x17/0x20 kernel: [<ffffffff813eb336>] ? md_thread+0x116/0x150 kernel: [<ffffffff81090a10>] ? autoremove_wake_function+0x0/0x40 kernel: [<ffffffff813eb220>] ? md_thread+0x0/0x150 kernel: [<ffffffff810906a6>] ? kthread+0x96/0xa0 kernel: [<ffffffff8100c14a>] ? child_rip+0xa/0x20 kernel: [<ffffffff81090610>] ? kthread+0x0/0xa0 kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 And something is wrong with the Named/BIND resulting in the same error for all domains: zone DOMAINEXAMPLE.com/IN: loading from master file DOMAINEXAMPLE.com failed: file not found zone DOMAINEXAMPLE.com/IN: not loaded due to errors. _default/DOMAINEXAMPLE.com/IN: file not found I'm pretty sure this is not enough information to solve the problem, but I'm willing to engage someone who can work this out for me. Any help would be greatly appreciated.

  Read the article

• Ubuntu server loses exactly 5 minutes once in a while

  - by Harold Smith

  I noticed that my server, an Ubuntu server 12.04, was losing time. I figured the hardware clock was off or maybe dying due to a faulty CMOS battery. I installed NTP to ensure the drift would be corrected, but to no avail. During a day it would lose 20 minutes or so. To debug, I created a small cron job to check against a remote servers time, which I knew to be correct. The script calculates the difference in seconds between local and remote time. The result was interesting. It seems to be losing exactly 5 minutes several times during the day. Look at this log (difference from remote server noted in seconds): Tue Oct 23 03:30:02 CEST 2012: 284 Tue Oct 23 03:35:02 CEST 2012: 284 Tue Oct 23 03:40:01 CEST 2012: 285 Tue Oct 23 03:45:02 CEST 2012: 285 Tue Oct 23 03:50:02 CEST 2012: 285 Tue Oct 23 03:55:02 CEST 2012: 284 Tue Oct 23 04:00:02 CEST 2012: 284 Tue Oct 23 04:05:01 CEST 2012: 285 Tue Oct 23 04:10:01 CEST 2012: 285 Tue Oct 23 04:15:02 CEST 2012: 585 Tue Oct 23 04:20:02 CEST 2012: 584 Tue Oct 23 04:25:02 CEST 2012: 584 Tue Oct 23 04:30:02 CEST 2012: 584 Tue Oct 23 04:35:01 CEST 2012: 585 Tue Oct 23 04:40:01 CEST 2012: 585 Tue Oct 23 04:45:02 CEST 2012: 585 Tue Oct 23 04:50:02 CEST 2012: 584 Tue Oct 23 04:55:02 CEST 2012: 584 Tue Oct 23 05:00:02 CEST 2012: 584 Tue Oct 23 05:05:01 CEST 2012: 585 Tue Oct 23 05:10:01 CEST 2012: 585 Tue Oct 23 05:15:02 CEST 2012: 585 Tue Oct 23 05:20:02 CEST 2012: 584 Tue Oct 23 05:25:02 CEST 2012: 584 Tue Oct 23 05:30:02 CEST 2012: 584 Tue Oct 23 05:35:01 CEST 2012: 585 Tue Oct 23 05:40:01 CEST 2012: 585 Tue Oct 23 05:45:02 CEST 2012: 584 Tue Oct 23 05:50:02 CEST 2012: 584 Tue Oct 23 05:55:02 CEST 2012: 584 Tue Oct 23 06:00:02 CEST 2012: 584 Tue Oct 23 06:05:03 CEST 2012: 584 Tue Oct 23 06:10:02 CEST 2012: 584 Tue Oct 23 06:15:01 CEST 2012: 585 Tue Oct 23 06:20:02 CEST 2012: 584 Tue Oct 23 06:25:02 CEST 2012: 584 Tue Oct 23 06:30:02 CEST 2012: 584 Tue Oct 23 06:35:02 CEST 2012: 584 Tue Oct 23 06:40:02 CEST 2012: 584 Tue Oct 23 06:45:01 CEST 2012: 585 Tue Oct 23 06:50:02 CEST 2012: 584 Tue Oct 23 06:55:01 CEST 2012: 585 Tue Oct 23 07:00:02 CEST 2012: 584 Tue Oct 23 07:05:02 CEST 2012: 584 Tue Oct 23 07:10:02 CEST 2012: 584 Tue Oct 23 07:15:02 CEST 2012: 584 Tue Oct 23 07:20:02 CEST 2012: 584 Tue Oct 23 07:25:02 CEST 2012: 584 Tue Oct 23 07:30:01 CEST 2012: 585 Tue Oct 23 07:35:02 CEST 2012: 584 Tue Oct 23 07:40:02 CEST 2012: 584 Tue Oct 23 07:45:02 CEST 2012: 584 Tue Oct 23 07:50:02 CEST 2012: 584 Tue Oct 23 07:55:02 CEST 2012: 584 Tue Oct 23 08:00:01 CEST 2012: 585 Tue Oct 23 08:05:02 CEST 2012: 584 Tue Oct 23 08:10:02 CEST 2012: 584 Tue Oct 23 08:15:02 CEST 2012: 584 Tue Oct 23 08:20:02 CEST 2012: 584 Tue Oct 23 08:25:02 CEST 2012: 584 Tue Oct 23 08:30:01 CEST 2012: 585 Tue Oct 23 08:35:02 CEST 2012: 584 Tue Oct 23 08:40:02 CEST 2012: 584 Tue Oct 23 08:45:02 CEST 2012: 584 Tue Oct 23 08:50:02 CEST 2012: 584 Tue Oct 23 08:55:02 CEST 2012: 584 Tue Oct 23 09:00:02 CEST 2012: 584 Tue Oct 23 09:05:03 CEST 2012: 584 Tue Oct 23 09:10:02 CEST 2012: 584 Tue Oct 23 09:15:02 CEST 2012: 584 Tue Oct 23 09:20:02 CEST 2012: 584 Tue Oct 23 09:25:02 CEST 2012: 584 Tue Oct 23 09:30:01 CEST 2012: 584 Tue Oct 23 09:35:02 CEST 2012: 584 Tue Oct 23 09:40:02 CEST 2012: 584 Tue Oct 23 09:45:02 CEST 2012: 584 Tue Oct 23 09:50:02 CEST 2012: 584 Tue Oct 23 09:55:02 CEST 2012: 584 Tue Oct 23 10:00:01 CEST 2012: 584 Tue Oct 23 10:05:02 CEST 2012: 584 Tue Oct 23 10:10:07 CEST 2012: 584 Tue Oct 23 10:15:02 CEST 2012: 584 Tue Oct 23 10:20:02 CEST 2012: 884 Tue Oct 23 10:25:02 CEST 2012: 884 Tue Oct 23 10:30:02 CEST 2012: 883 Tue Oct 23 10:35:01 CEST 2012: 884 Tue Oct 23 10:40:02 CEST 2012: 884 Tue Oct 23 10:45:02 CEST 2012: 884 Tue Oct 23 10:50:02 CEST 2012: 884 Tue Oct 23 10:55:02 CEST 2012: 1184 Tue Oct 23 11:00:02 CEST 2012: 1183 Tue Oct 23 11:05:01 CEST 2012: 1184 Tue Oct 23 11:10:02 CEST 2012: 1184 Tue Oct 23 11:15:02 CEST 2012: 1184 Tue Oct 23 11:20:02 CEST 2012: 1184 This does not seem to be faulty CMOS battery in my opinion. But what do you think?

  Read the article

• Asus P8P67 Rev. 3.1 Motherboard issues powering on and saving settings

  - by Scott

  Edit: New Information Have some updated information from the old question below: So basically my issue right now is somewhat similar, but I've been able to rule out a couple of things. I don't think this has anything to do with light on the motherboard. No matter what lights are on/off on the motherboard when the computer is off, they don't affect this issue. The main power LED on the Mobo is always lit when the power supply is turned on, and that's what matters anyway. Even when the main power LED is on, the PC will NOT boot up the first time I hit the power switch. I have to go reset the power supply (make all lights turn off on the Mobo and back on), and THEN hit the power switch. Then everything boots up. Also, the BIOS settings are reset every time this happens. Asus Tech Support told me to try jumping the power with something metal to try and rule out that it's a problem with the connectors getting power, or if it's a problem with the case power switch pins - haven't done that yet though. Any ideas? This is a lot simpler than it was before when I thought it had to do with certain LED indicators for RAM, EPU, etc. Original Question So I built my new desktop just about 3 weeks ago. I've been having a few issues which I think are all related to my motherboard, an Asus P8P67 Revision 3.1, but I'm not 100% sure as this is really the first from-scratch build I've ever done. I've posted these questions on the Asus forums, Asus Tech Support, and the Corsair forums as well as I thought it might have something to do with my power supply at one point. None of these avenues have solved my issue until now completely, so I thought I'd come here to see what you guys think. Here's what's happening: My computer is off, and I go to power it on. I press the power switch on the case (Antec Nine Hundred), and nothing seems to happen. Upon further inspection, I see that what this actually does is simply turn on the EPU LED on my motherboard, but doesn't actually boot anything up. I then have to go and flip the main power switch on the power supply off and back on. What this does is turn off all lights on the Motherboard after a few seconds, and turn them all back on (including the EPU LED that was off before I hit the power switch the first time). Now, hitting the power switch works. The machine boots up fine, and starts going through the boot up process. As a side note: My Motherboard is set to "Force BIOS", and every single time I change this to do the opposite, the next time my computer boots up that change reverts itself. I think this may be due to the fact that I am doing the hard reset on the power supply each time, but I'm not sure. I had thought that the Motherboard would keep its BIOS settings unless you did something to the Mobo itself - so this may be a related issue, or something else completely. That's basically it. Once it's on, it's on. It works fine, recognizes all of my hardware, and runs great. All fans/lights in the case work great, and I'm getting standard readings. The next time I go to shut the computer down however, I can expect the same exact process getting it up and running, including being forced to go into BIOS and exit again before I can load Windows. Another side note: If I power on my computer using the power switch DIRECTLY after shutting it down, it powers right back on (I think this is because the EPU LED light doesn't have time to turn off). It looks as if as long as the EPU LED is lit up on the motherboard before I hit the power switch on the case, the thing will boot up fine (although this doesn't explain the "Force BIOS" issue, at least it's something). Any ideas? Thanks guys. P.S. - System Specs Asus P8P67 Rev. 3.1 Motherboard Intel Core i7 2600K Processor 16GB (4x4GB) G-Skill 1600 RAM NVIDIA EVGA GTX 570 Video Card Crucial 128GB SSD HD Corsair 850W Power Supply Seagate 2TB HDD

  Read the article

• mysqld service crashes on restart, after importing mysqldump #innodb

  - by ubunut

  I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

  Read the article

• Symantec Protection Suite and System Recovery 2011 Desktop Edition

  - by rihatum

  I am re-posting this as my previous question was being treated as if I am "Shopping or seeking Product Recommendations" even though I was NOT - BTW they have deleted my comments too which were not offensive in nature. anyway - I have re-phrased some parts of my question and I hope SF Admins "Do Not Modify / Edit" this one - will be most grateful for that. I have a lot of respect for the People who visit this SITE and help others ! Just To clarify : Just to go by SF rules - I am not seeking someone to Design this solution, I am simply seeking real world examples, experiences, technical expert opinions / suggestions, any tips or tricks they may have or any problems they may have faced while doing something similar above with these products. I am also not asking for Capacity Planning for Storage, We have done some research and I am seeking Expert Assurance / Suggestions. We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Server Hardware : Per SQL Server : 16GB RAM + SAS DISKS + Dual XEON, RAID-10 for the SQL DB or I can always mount a LUN from our existing Hitachi or EMC SAN. SEPM Server : 16GB RAM + SAS DISKS + DUAL XEON System Recovery MGMT SERVER : 16GB RAM + SAS DISKS + DUAL XEON Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) We have netbackup in our environment backing up other servers, I am planning to protect these 4 (2 x SQL, 1 x SEPM, 1 x System Recovery Mgmt. Server) via netbackup or I can use System recovery 2011 server edition on all 4 of these boxes as well. (License is not an issue as we have the complete symantec portfolio included in our license). d) Now - Saving Desktop backups - What strategies have you implemented ? Any best practice recommendation for a large user base ? I was thinking to either mount a LUN from our Hitachi SAN on the Symantec Recovery Server itself or backup to the users hard drive locally and then copy it over to a network location ? Suggestions welcome :-) If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks !

  Read the article

• VMware vSphere cluster design for site redundancy

  - by Stefan Radovanovici

  I have a question about the best design for site redudancy when using vSphere clusters. A bit of background info about our situation first though. We are a medium-sized company with two main offices, located in different countries. Our networks are linked by a Layer2 150Mbps leased line which is currently underused. We have a variety of services running for internal use within the company, some on physycal servers and some on existing vSphere clusters. In our department we also run several services (almost all running under various forms of Linux) like NTP, Syslog, jump servers, monitoring servers and so on. We have now the requirement that those servers need to be redundant within each location (which they are not at the moment) and also site redudant (which they are to some extent, the servers are duplicated in the 2nd location with configurations kept in sync via various methods at the application layer). There is no SAN available for us, at least not something that we can use at the moment. Cost is also an issue. While we do have some budget available for this, we can't afford to buy SANs for both locations for example. I looked at the VSA feature and it seems that this could be something for us but I am unsure how to solve the site-redudancy requirement. At the moment for testing purposes I am setting up in a lab a vSphere 5 with VSA on two ESXi hosts. I am currently using the Essentials Plus kit with VSA license, which allows me to build a VSA cluster on up to 3 hosts, together with a vCenter license to manage them. The hosts each have two dual-port network cards and two 600GB drives, running in Raid1. Hardware-wise this will be enough for us to run the all the services we need as VMs and will provide redundandcy within the site. At the moment I see only two option to have site redundancy: build an identical VSA cluter in the second location and keep the various services sync'ed at application layer (database sync, rsync and so on). simply move one of the hosts from the existing cluster to the second location, basically having the VSA cluster span the 150Mbps link between the sites. I would very much prefer the second option but I am unsure how well it'll work, if it can work at all. Technically it should, we can span the needed VLANs across the leased line and have them available in the second location. The advantage would be that we don't need to worry at all about sync'ing databases and the like. But I have the feeling that the bandwidth will not be enough, I have no way of knowing how much traffic will the VSA cluster generate between the hosts. I realize that this will most likely depend on the individual usage of the VMs but still, I have no idea how VSA replicates data between the ESXi hosts. Are these my only options or can my goals be achieved in some other way ? Is there perhaps a way to have some sort of "cold stand by" cluster in the second location where the VMs would be sync'ed once per night from the main location ? The idea is that in case the first site becomes unavailable, we would be able to bring all those VMs online there. We would be ok with the data being 1 day old. Any answers are appreciated. Best regards, Stefan

  Read the article

• Linux: Apple Wireless A1314 Fn key not registered, looks like software bug

  - by ramplank

  I'm trying to set up my Apple Wireless Keyboard with my Kubuntu systems. These are PC hardware powered by Intel Atom and Intel i5 respectively. The keyboard has a US keyboard layout and has model number A1314 written on the back. It takes two AA batteries. I'm saying that because it appears there are multiple types of model A1314. I have tried this on a 10.04, 11.04, 11.10 and 12.04 system with no success. Every time using a bluetooth dongle and the KDE bluetooth notification tray applet, the keyboard can be connected. In both cases it shows up as "Apple Wireless Keyboard". Almost everything works as expected, in fact, I'm typing on it right now. But one thing doesn't: The Fn key. I'd like to use Fn + Down Arrow as PgDn / Page Down, I understand this is default behaviour on Apple keyboards. And of course I'd like the same for Page Up, Home and End. I'll stick to Page Down in my example. I used the xev tool to see the keycodes the system receives, and if I press on Fn nothing happens, and nothing is registered. If I press Fn + Down Arrow, xev only registers the down arrow. Here's the output from my 11.04 system to illustrate: Press just the Fn key: no output Press Down Arrow key: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699773, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2699860, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False Press Fn+Down Arrow Keys together: KeyPress event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701548, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4400001, root 0x15d, subw 0x4400002, time 2701623, (44,45), root:(1352,298), state 0x10, keycode 116 (keysym 0xff54, Down), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False I've been searching this forum and other Linux-related forums for hours but I still have not found a solution. I mostly found advice on how to fix this when using an actual apple laptop or desktop, but I don't have that. They said to try something like the following echo 2 > /sys/module/hid_apple/ ... But since there's no hid_apple directory present on my systems, I've needed to modprobe hid_apple first. That didn't help either. I'm cool with changing some config files, or compiling my own patched kernel if that's necessary. I currently have a 10.04 and 12.04 system available to test. The same issue occurs when hooked up to Windows 7. Fn key still does nothing, not by itself or in combination with other keys. With some AutoHotkey fiddling, I was able to confirm the key is registered as pressed, but ignored by default. A custom AutoHotkey script can fix that. But AutoHotkey is only for Windows, I want my problem fixed on Linux. Hooked up to an iPad 2 it only works in combination with the F1-F12 keys. Not with the arrow keys. If the screen of the ipad is off, and I press just the Fn key, the screen will come on, so the key itself is registered as pressed. So to sum up my question: Can anyone help me get Page Up, Page Down, Home and End to work on this keyboard, when that requires me to use an Fn key which is currently not registered?

  Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >