Search Results

Search found 16329 results on 654 pages for 'b long'.

Page 301/654 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

  • How much the distance and ms can affect on the download speed ?

    - by Prix
    Let's consider A (client) and B (server) where A makes download from B. How much can a bad routing from A to B affect the download speed ? For example A does a tracert to B and get a response of 10 steps where the avg ms is around 300 with 10% packet loss at the 4 step and when the connection is normal the avg from A to B is 10 ~ 30 ms. Could this sort of impact reduce A download speed drasticaly or as long as both side and routes have enough link for the full speed of A from B and vice-versa it should maintain the same speed ? Besides tracert and the ping analyse of A to B what else is used to identify the problem ? If you need extra information please let me know.

    Read the article

  • Reaching Intermediate Programming Status

    - by George Stocker
    I am a software engineer that's had positions programming in VBA (though I dare not consider that 'real' experience, as it was trial and error!), Perl w/ CGI, C#, and ASP.NET. The latter two are post-undergraduate, with my entrance into the 'real world'. I'm 2 years out of college, and have had 5 years of experience (total) across the languages I've mentioned. However, when it comes to my resume, I can only put 2 years down for C#, and less than a year down for ASP.NET. I feel like I know C#, but I still have to spend time going 'What does this method do?', whereas some of the more senior level engineers can immediately say, "Oh, Method X does this, without ever having looked at that method before." So I know empirically that there's a gulf there, but I'm not exactly sure how to bridge it. I've started programming in Project Euler, and I picked up a book on design patterns, but I still feel like I spend each day treading water, instead of moving forward. That isn't to say that I don't feel like I've made progress, it just means that as far as I come each day, I still see the mountain top way off in the distance. My question is this: How did you overcome this plateau? How long did it take you? What methods can you suggest to assist me in this? I've read through Code Complete, The Mythical Man Month, and CLR via C#, 2nd edition -- my question is: What do I do now? Edit: I just found this question on projects for an intermediate level programmer. I think it adds to the discussion (though it does not supplant my question). As such, I'm adding it to the question as a "For More Information".

    Read the article

  • How to sync Google Chrome Web Browser and Google Bookmarks

    - by Cawas
    Google Chrome has its own bookmarks that are synced across browsers using Google Docs. And Google also have Google Bookmarks that works very well with google search in itself. It has been a long discussion in many places on why they don't get along. I know similar questions have been asked, but I want to leave this open until a good solution comes around, unlike this one. So, is the perfect way to sync google chrome bookmarks and google bookmarks already born? Next step: sync with delicious!

    Read the article

  • Read only file system error on ubuntu after partitioning

    - by Ranjith R
    I am not sure if I am the root cause of this problem but this is what I did: I wanted latest ubuntu and latest linux mint together on my thinkpad laptop. Windows 7 was already there. I already had mint. So I put in the USB with ubuntu image and started installing ubuntu. I chose to install side by side. It was taking a long time to finish defragmenting and partitioning. I decided to give up as I became a little impatient and I pressed the skip button. After the skipping, I realized that the partitioning was complete and went ahead with installing ubuntu. Now the linux mint OS starts reporting the file system as read only at least once every day and I have restart and tell the OS to fix errors in hard disk. After I press F key, the system fixes the issues, restarts and all is well again. Is there some way to fix the issue permanently. I think reinstalling will solve the issues, but I can not do it as I have a lot of data and I will have reinstall and configure a lot of softwares that I use daily. I checked the smart check in disk utility and the hard disk seems to be fine Also I checked both the partitions for errors with disk utility and the report says they are fine. Is there something I can do before I reinstall?

    Read the article

  • Excel - Avoid cell text to be shown onto next empty cell

    - by e-mre
    When you have text in an Excel cell that is too long to be shown in the visible area of a single cell and the cell next to the first cell (the one on the right) is empty, Excel lets the text to be printed onto the next cell. This is what I want to change. I want to avoid this text overflow. I know I can avoid this by enabling "word wrap" and adjusting row height. But that is not what I want. I want to change the DEFAULT behavior of Excel so it shows the value of each cell only in the visible area of that cell. No overflow, no word wrap. Is this possible? (I am using Excel 2010 by the way)

    Read the article

  • DHCPOFFER delay VLAN

    - by john883
    I have configured two VLANs [ 15 and 16 ] and a trunkport on a Cisco Catalyst 2960. The trunkport is connected to eth2 on a Linux server The server is configured to support VLAN's and the interfaces eth2.15 eth2.16 is configured with ip addresses on two different subnet. dhcp3-server is running on the same server and hands out IP-addresses to the VLANs. When connecting a client to a port that is configured in ex. VLAN 15 and requesting a IP-address, i experience a long delay before recieving a DHCPOFFER, around 30 seconds or so, the client needs to send a DHCPDISCOVER about five times but will always recieve a DHCPOFFER. Any suggestion why this delay is happening?

    Read the article

  • Apress Deal of the Day - 14/Mar/2011

    - by TATWORTH
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} jQuery Recipes: A Problem-Solution Approach jQuery is one of today’s most popular JavaScript web application development frameworks and libraries. jQuery Recipes can get you started with jQuery quickly and easily, and it will serve as a valuable long-term reference. $44.99 | Published Jan 2010 | Bintu Harwani

    Read the article

  • Installing Visual Studio 2010 Service Pack 1

    - by Martin Hinshelwood
    As has become customary when the product team releases a new patch, SP or version I like to document the install. This post seams almost redundant as I had no problems, but I think that is as valuable to other thinking of installing the Service Pack as all the problems that we sometimes get. As per Brian's post I am Installing Visual Studio Team Foundation Server Service Pack 1 first and indeed as this is a single server local deployment I need to install both. If I only install one it will leave the other product broken. Figure: Hopefully this will be more uneventful It takes a little while for your system to be checked to see what components need updating. On my main computer this was pretty quick, but on the laptop it took some time. Figure: There are a lot of components to update With this update also comes an update to .NET as well as many other components. Figure: I downloaded the full 1.5GB’s, but you could do a web install It depends on how good you internet connection is to how long it would take to download, but as I am now in the US I decided not to trust the internet connection speeds. It took around 30-40 minutes to download the full thing which is a little slow. Figure: I did not need to download, but that would increase the install time So on my main computer again this was fast, but again on my netbook this took a little while. Figure: The actual install took around 30-40 minutes (2 hours on netbook) I was pretty impressed with the speed of the install, and as Team Explore is now out of the box with Visual Studio 2010 I don’t get the problem of the SP being installed before Team Explorer and having a disjointed experience Figure: As I suspected, no problems with the install Figure: Checking in Visual Studio shows that all the servicing points were successful This was an easy experience even if the SP was over 1.5GB’s to download Hopefully I will be discovering things that work better for a good while to come, as well as not seeing holes in the product that I had no encountered yet. What were your experiences of installing Visual Studio 2010 Service pack 1?

    Read the article

  • How do I stop CRM from asking for admin credentials when printing report

    - by Ac0ua
    Problem: When printing a report in CRM, I am asked by the UAC for admin credentials. There is a long URL: https://(crm_hostname)/reserved.ReportViewerWebcontrol.axd?ReportSession=(ID)ControlID=(ID)Culture=1333&UICulture=1033&ReportStack=1&OpType=PrintCab Info: There are three users that have the issue laied out here. They are not admins of any kind. It looks like it is asking for permission to allow SQL Server Reporting Services 2008 to run. When I put my credentials in, it just brings up the Print dialog box (this is fine, just stop asking for credentials). I know this might sound silly but I downloaded and installed "SQL Server Reporting Services 2008" hopping my credentials would give permission right from the beginning. Giving the users local admin, I was told is not an option. Note: I did post this on community (dot) dynamics (dot) com but, they are not a very active website. Thanks for any help even if it just points me in the right direction!

    Read the article

  • Mounting Gluster Volumes

    - by Roman Newaza
    I have created Hosted Zone with 2 IP addresses of Gluster Cluster, both IP are returned by dig. After mounting Gluster, I cannot ls mount point as it takes long time. mount shows me it's mounted, but df doesn't. Finally, I have this: ls: cannot access /mnt/storage: Transport endpoint is not connected. But if I mount it with the one of the IP, no problem - volume contents is accessible OS: Ubuntu 11.10 GlusterFS: 3.2.6 Log: http://pastie.org/private/2jgp4h1hnqgzych3djtg I have can telnet storage from client - ports are open.

    Read the article

  • Is there a way to see any tar progress per file?

    - by Svish
    I have a couple of big files that I would like to compress. I can do this with for example tar cvfj big-files.tar.bz2 folder-with-big-files The problem is that I can't see any progress, so I don't have a clue how long it will take or anything like that. Using v I can at least see when each file is completed, but when the files are few and large this isn't the most helpful. Is there a way I can get tar to show more detailed progress? Like a percentage done or a progress bar or estimated time left or something. Either for each single file or all of them or both.

    Read the article

  • Showing Egde Shaped Event Duration in StreamInsight using Debugger

    Whilst writing some courseware I wanted to be able to see the start and end times of Edge shaped events from within the debugger.  A quick recap on Edge events At the start of the event you do not know the end time and most probably cannot work it out or you should be using one of the other shapes. You enqueue an event (Start Edge) with the start time and payload of the event.  The end time of the event is set to infinity When you see the end edge come through, you enqueue another event (End Edge) with the previous start time and payload and restate the event’s end time.  This is the Retract Event All seems simple enough.  The problem is the debugger is a little shy about showing you what you need but you can get it to show you everything by also reading this article Here’s what I mean. Here is what the Event Debugger looks like by default when viewing 2 complete edge events.  Notice how all the end times are set to infinity   The above does not tell you for how long an event was valid.  I then add the “NewEndTime” column to the debugger output and there I can now see the duration of events.  You will see the Retract events (End Edge) have the same start time and payload as their respective start events (Start Edge)   You can follow the exact same logic when looking at Interval shape events.  They look a little different on the output adapter but using this article you can easily see what is happening.

    Read the article

  • Changing website Url - Am I making an SEO mistake

    - by Denis
    I have a webiste with a .com domain that is a year old. The business is a shop based in Ireland and I have purchased a .ie domain. I plan to move the website over to the new domain, SEO Good or Bad idea? Old Url - SmythsOfTerenure.com | New Url - SmythsComputerRepair.ie (I am using Fake names and fictional business in the example Url's) The new domain has my main keyword in it. The old domain has my family name and business location (city district) It currently ranks high for lots of relevant keywords in Google with low traffic and low competition. Current website traffic is about 80 session per week. 80% of that traffic is Organic from Google. I am changing domain in an attempt to help SEO long term by having a CC TLD (.ie rather than .com) and having my main Keyword in the domain. I plan to do 301 re-directs from old to new and update GW Tools and G Analytics but am I making a mistake changing it at all as I know rankings may fall in the sort term. Homepage PR=0 and very few inbound links. Should I just leave it on the old domain? Or after a few months should I be back up ranking as well as I am now?

    Read the article

  • Putty freezes at random when logging into a remote machine in another continent

    - by vito
    I have to ssh to a remote machine in Europe from Asia every day for my work. But Putty freezes sometimes at totally random times and I have no choice but to close and re-open a new ssh session. It's frustrating especially when I'm editing something or executing a long running program. I know the question really doesn't have much details ('cause nothing seems to be wrong with the network at all). Has anyone experienced this sort of issue with Putty and had resolved it? Thanks for your time!

    Read the article

  • VirtualBox, physical disks, and snapshots

    - by noamtm
    I have an Ubuntu guest installed on a raw HDD (entire disk, not a partition). It runs just fine under WinXP. In addition, I was able to boot directly into it (using the BIOS boot-device selector). At some point, I have created a snapshot of the VM. I have made some changes since then. Today, after a long time, I tried booting into the "VM" disk. It worked, but all the data there is pre-snapshot (or, rather, frozen at the snapshot). Can I somehow merge the changes since I took the snapshot into the physical state?

    Read the article

  • mount dev, proc, sys in a chroot environment?

    - by Patrick
    I'm trying to create a Linux image with custom picked packages. I followed the guide here http://www.olpcnews.com/forum/index.php?topic=4766.0 However, when I tried to install some packages, it failed to configure due to missing the proc, sys, dev directories. So, I learned from other places that I need to "mount" the host proc, ... directories to my chroot environment. Though, I saw two syntax and am not sure which one to use. In host machine: mount --bind /proc <chroot dir>/proc and another syntax (in chroot envrionment): mount -t proc none /proc Which one should I use, and what are the difference? Edit: What I'm trying to do is to hand craft the packages I'm going to use on an XO laptop, because compiling packages takes really long time on the real XO hardware, if I can build all the packages I need and just flash the image to the XO, I can save time and space.

    Read the article

  • Script/tool to import series of snapshots, each being a new edition, into GIT, populating source tree?

    - by Rob
    I've developed code locally and taken a fairly regular snapshot whenever I reach a significant point in development, e.g. a working build. So I have a long-ish list of about 40 folders, each folder being a snapshot e.g. in ascending date YYYYMMDD order, e.g.:- 20100523 20100614 20100721 20100722 20100809 20100901 20101001 20101003 20101104 20101119 20101203 20101218 20110102 I'm looking for a script to import each of these snapshots into GIT. The end result being that the latest code is the same as the last snapshot, and other editions are accessible and are as numbered. Some other requirements: that the latest edition is not cumulative of the previous snapshots, i.e., files that appeared in older snapshots but which don't appear in later ones (e.g. due to refactoring etc.) should not appear in the latest edition of the code. meanwhile, there should be continuity between files that do persist between snapshots. I would like GIT to know that there are previous editions of these files and not treat them as brand new files within each edition. Some background about my aim: I need to formally revision control this work rather than keep local private snapshot copies. I plan to release this work as open source, so version controlling would be highly recommended I am evaluating some of the current popular version control systems (Subversion and GIT) BUT I definitely need a working solution in GIT as well as subversion. I'm not looking to be persuaded to use one particular tool, I need a solution for each tool I am considering. (I haved posted an answer separately for each tool so separate camps of folks who have expertise in GIT and Subversion will be able to give focused answers on one or the other). The same but separate question for Subversion: Script/tool to import series of snapshots, each being a new revision, into Subversion, populating source tree?

    Read the article

  • I have to shard a mysql database. I want to start with 12 shards on 2 machines. What is the best w

    - by Tim
    All tables are InnoDb. I would rather not use mysqldump, because the shard sizes will be about 200 GB (about 700 million rows), and that will take too long. I was hoping to just stop mysql for an hour, copy the data files to a new machine, and start back up. But you can't do this with InnoDb, as some data is in the shared tablespace. Even if I have the innodb_file_per_table option set. This is not a website, but a custom application, used by tens of thousands right now, so uptime and performance are important. I suppose I could add logic into my server application to allow for gradual rebalancing / moving of a shard. Does anyone have a better idea?

    Read the article

  • An experiment: unlimited free trial

    - by Alex.Davies
    The .NET Demon team have just implemented an experiment that is quite a break from Red Gate's normal business model. Instead of the tool expiring after the trial period, it now continues to work, but with a new message that appears after the tool has saved you a certain amount of time. The rationale is that a user that stops using .NET Demon because the trial expired isn't doing anyone any good. We'd much rather people continue using it forever, as long as everyone that finds it useful and can afford it still pays for it. Hopefully the message appearing is annoying enough to achieve that, but not for people to uninstall it. It's true that many companies have tried it before with mixed results, but we have a secret weapon. The perfect nag message? The neat thing for .NET Demon is that we can easily measure exactly how much time .NET Demon has saved you, in terms of unnecessary project builds that Visual Studio would have done. When you press F5, the message shows you the time saved, and then makes you wait a shorter time before starting your application. Confronted with the truth about how amazing .NET Demon is, who can do anything but buy it? The real secret though, is that while you wait, .NET Demon gives you entertainment, in the form of a picture of a cute kitten. I've only had time to embed one kitten so far, but the eventual aim is for a random different kitten to appear each time. The psychological health benefits of a dose of kittens in the daily life of the developer are obvious. My only concern is that people will complain after paying for .NET Demon that the kittens are gone.

    Read the article

  • Glitch-free cross-fades in HTML5

    - by Alexander Gladysh
    In my HTML5 canvas game, I need to cross-fade two sprites which have some glow around them. (Glow is backed into sprites.) Initially, the first sprite is visible. During the cross-fade the first sprite should vanish, and be replaced with the second one. How exactly the cross-fade is done — does not matter, as long as it is smooth and there are no visual glitches. I've tried two techniques: During the cross-fade I simultaneously interpolate alpha of the first sprite from 1.0 to 0.0, and alpha of the second sprite — from 0.0 to 1.0. With this technique I can see background in the middle of the cross-fade. That's because both sprites are semi-transparent most of the time. During the cross-fade I first interpolate alpha of the second sprite from 0.0 to 1.0 (first sprite alpha is at 1.0), and then interpolate alpha of the first sprite from 1.0 to 0.0. With this technique background is not seen, but the glow around sprites flashes during the cross-fide — when both sprites are near the full visibility. In non-HTML5 game I'd use shaders to do cross-fade separately in RGB and alpha channels. Is there a trick to do the cross-fade I need in HTML5 without visual glitches?

    Read the article

  • Best practices for App Idea ownership and shares

    - by JOG
    I am developing apps on my sparetime. I am the sole developer, and two non-programmer friends of mine provide vision, content, algorithms and ideas. We always agree happily on all the features, todos and prioritizations. But naturally, coding it is the biggest part. When selling, we agree on splitting profit equally, that is 33% each. But version 1.0 naturally does not sell much. And I go on to try to make the app more viral. This includes tons of stuff where the others are of little help. Examples: Adding support for sharing, facebook connect, gameifying, letting users add content, home page, support, maintenance, server services to make it easier for to update content. The list is long. Suddenly I will be doing 100% of a lot of work but only "own" a third of the income. My friends may either "fade out" of the project after 1.0, or they continue to contribute, but with less value and I would rather exchange them for more programmers or graphic designers. The effort they made to version 1.0 is worth a lot to the app and I realize I would have never done it without them. But I am doing all the work in the end. It is hard to negotiate about splitting 90, 5, 5 instead of 33% each, because the idea is still theirs. How to solve this? What are the best practices to regard the ownership of the app? What kind of agreements could I make that make it beneficial and motivational for me to continue developing the app?

    Read the article

  • Is there an easy way to configure an Ubuntu system to function as a proxy/file server from behind an NAT?

    - by amol.kamath
    Sorry for the long question, but the situation/desire is quite complex. Here is my setup: I have a laptop which I carry around everywhere and I have a desktop sitting at home, connected to the internet through a router using NAT. My objective is to create a connection from my laptop to my desktop that can allow me to (in order of priority): Use the desktop as a proxy server Access files on the desktop remotely Control said desktop from the laptop using VNC or similar. Now here is the scene. I have already looked up and tried several ways to achieve the above goals. Teamviewer - I used it and didn't like it. This is not an option. SSH - This seems ideal, I have figured a way to use this for both proxy and file sharing. However, I am currently unable to connect it due to the NAT. I have a separate thread trying to get that to work here. VPN - I've figured out how to use this method for proxy, but not file sharing. However this faces the same problem as the above: I can't get it to connect through the NAT. Does anyone have any other solutions for what I want? Otherwise, if there are solutions to connecting through the NAT, please tell me (in the other thread). Thanks

    Read the article

  • Maximum Length Of IP Address: 15 (IPv4) & 39(IPv6)

    - by Gopinath
    Problem You are designing a database table for a web application that requires to store IP address of users who visits the site. The IP address is required to be stored a character data in the table. To define size of the character column you need to know maximum length of IP address. So, what is the maximum length of an IP address? Solution The IPv4 version of IP address is in the following format 255.255.255.255 To store IPv4 address we require 15 characters. The IPv6 version of IP address is grouped into sets of 4 hex digits separated by colons, like the below 2001:0db8:85a3:0000:0000:8a2e:0370:7334 To store IPv6 address you require a 39 characters long column. Conclusion As IPv4 and IPv6 are the commonly use protocols, you better define a column with 39 characters length so that both the format address are saved in to the table without any issues. This article titled,Maximum Length Of IP Address: 15 (IPv4) & 39(IPv6), was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • SQL Server tempdb size seems large, is this normal?

    - by Abe Miessler
    From what I understand the system database is used to hold temporary tables, intermediate results and other temporary information. On one of my database instances I have a tempdb that is seems very large (30GB). This database has not been modified (as in "last modified date" on the mdf file) in over a week. Is it normal to have the temp db remain that large for that long of a period? It seems to me that it should be updating fairly often and returning space that it is using fairly quickly... Am I way off here or is SQL Server doing something weird? FYI: This is a SharePoint 2010 database, not sure if that makes a difference.

    Read the article

  • Player sprite moving slower on iPhone 4

    - by nvillec
    I just finished getting movement/jump animation for a player sprite in Xcode using Cocos2D. The basic movement algorithm is a timer that updates every 0.01 sec, changing the sprite position to (sprite.position.x + xVel, sprite.position.y + yVel). Each time a movement button is tapped, the appropriate velocity (initialized to 0) is changed to whatever speed I choose, then a stop movement button returns the velocity to 0. It's not an ideal solution but I'm very new at this and stoked to at least have that working with little help from the internet. So I may not have explained that perfectly, but it is in fact working to my satisfaction in Xcode's iPhone Simulator, however when I build it for my device and run it on my phone, the sprite's movement speed is noticeably slower than in Xcode. At first I thought it must have to do with the resolution of the iPhone 4, making the sprite's movement path twice as long, but I found that if I pull up the multitask bar, then return to the app the speed will sometimes jump back to normal. My second theory was that the code is just inefficient and is bogging the processes down, but I would see this reflected in the frame rate wouldn't I? It stays at 59-60 the whole time, and the spritesheet animation runs at the correct speed. Has anyone experienced this? Is this a really obvious issue that I'm completely missing? Any help (or tips for optimizing my approach to movement) would be much appreciated!

    Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >