Search Results

Search found 18865 results on 755 pages for 'distinct values'.

Page 301/755 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• SQL Server Configuration timeouts - and a workaround [SSIS]

  - by jamiet

  Ever since I started writing SSIS packages back in 2004 I have opted to store configurations in .dtsConfig (.i.e. XML) files rather than in a SQL Server table (aka SQL Server Configurations) however recently I inherited some packages that used SQL Server Configurations and thus had to immerse myself in their murky little world. To all the people that have ever gone onto the SSIS forum and asked questions about ambiguous behaviour of SQL Server Configurations I now say this... I feel your pain! The biggest problem I have had was in dealing with the change to the order in which configurations get applied that came about in SSIS 2008. Those changes are detailed on MSDN at SSIS Package Configurations however the pertinent bits are: As the utility loads and runs the package, events occur in the following order: The dtexec utility loads the package. The utility applies the configurations that were specified in the package at design time and in the order that is specified in the package. (The one exception to this is the Parent Package Variables configurations. The utility applies these configurations only once and later in the process.) The utility then applies any options that you specified on the command line. The utility then reloads the configurations that were specified in the package at design time and in the order specified in the package. (Again, the exception to this rule is the Parent Package Variables configurations). The utility uses any command-line options that were specified to reload the configurations. Therefore, different values might be reloaded from a different location. The utility applies the Parent Package Variable configurations. The utility runs the package. To understand how these steps differ from SSIS 2005 I recommend reading Doug Laudenschlager’s blog post Understand how SSIS package configurations are applied. The very nature of SQL Server Configurations means that the Connection String for the database holding the configuration values needs to be supplied from the command-line. Typically then the call to execute your package resembles this: dtexec /FILE Package.dtsx /SET "\Package.Connections[SSISConfigurations].Properties[ConnectionString]";"\"Data Source=SomeServer;Initial Catalog=SomeDB;Integrated Security=SSPI;\"", The problem then is that, as per the steps above, the package will (1) attempt to apply all configurations using the Connection String stored in the package for the "SSISConfigurations" Connection Manager before then (2) applying the Connection String from the command-line and then (3) apply the same configurations all over again. In the packages that I inherited that first attempt to apply the configurations would timeout (not unexpected); I had 8 SQL Server Configurations in the package and thus the package was waiting for 2 minutes until all the Configurations timed out (i.e. 15seconds per Configuration) - in a package that only executes for ~8seconds when it gets to do its actual work a delay of 2minutes was simply unacceptable. We had three options in how to deal with this: Get rid of the use of SQL Server configurations and use .dtsConfig files instead Edit the packages when they get deployed Change the timeout on the "SSISConfigurations" Connection Manager #1 was my preferred choice but, for reasons I explain below*, wasn't an option in this particular instance. #2 was discounted out of hand because it negates the point of using Configurations in the first place. This left us with #3 - change the timeout on the Connection Manager. This is done by going into the properties of the Connection Manager, opening the "All" tab and changing the Connect Timeout property to some suitable value (in the screenshot below I chose 2 seconds). This change meant that the attempts to apply the SQL Server configurations timed out in 16 seconds rather than two minutes; clearly this isn't an optimum solution but its certainly better than it was. So there you have it - if you are having problems with SQL Server configuration timeouts within SSIS try changing the timeout of the Connection Manager. Better still - don't bother using SQL Server Configuration in the first place. Even better - install RC0 of SQL Server 2012 to start leveraging SSIS parameters and leave the nasty old world of configurations behind you. @Jamiet * Basically, we are leveraging a SSIS execution/logging framework in which the client had invested a lot of resources and SQL Server Configurations are an integral part of that.

  Read the article

• ActionResult types in MVC2

  - by rajbk

  In ASP.NET MVC, incoming browser requests gets mapped to a controller action method. The action method returns a type of ActionResult in response to the browser request. A basic example is shown below: public class HomeController : Controller { public ActionResult Index() { return View(); } } Here we have an action method called Index that returns an ActionResult. Inside the method we call the View() method on the base Controller. The View() method, as you will see shortly, is a method that returns a ViewResult. The ActionResult class is the base class for different controller results. The following diagram shows the types derived from the ActionResult type. ASP.NET has a description of these methods ContentResult – Represents a text result. EmptyResult – Represents no result. FileContentResult – Represents a downloadable file (with the binary content). FilePathResult – Represents a downloadable file (with a path). FileStreamResult – Represents a downloadable file (with a file stream). JavaScriptResult – Represents a JavaScript script. JsonResult – Represents a JavaScript Object Notation result that can be used in an AJAX application. PartialViewResult – Represents HTML and markup rendered by a partial view. RedirectResult – Represents a redirection to a new URL. RedirectToRouteResult – Represents a result that performs a redirection by using the specified route values dictionary. ViewResult – Represents HTML and markup rendered by a view. To return the types shown above, you call methods that are available in the Controller base class. A list of these methods are shown below.   Methods without an ActionResult return type The MVC framework will translate action methods that do not return an ActionResult into one. Consider the HomeController below which has methods that do not return any ActionResult types. The methods defined return an int, object and void respectfully. public class HomeController : Controller { public int Add(int x, int y) { return x + y; }   public Employee GetEmployee() { return new Employee(); }   public void DoNothing() { } } When a request comes in, the Controller class hands internally uses a ControllerActionInvoker class which inspects the action parameters and invokes the correct action method. The CreateActionResult method in the ControllerActionInvoker class is used to return an ActionResult. This method is shown below. If the result of the action method is null, an EmptyResult instance is returned. If the result is not of type ActionResult, the result is converted to a string and returned as a ContentResult. protected virtual ActionResult CreateActionResult(ControllerContext controllerContext, ActionDescriptor actionDescriptor, object actionReturnValue) { if (actionReturnValue == null) { return new EmptyResult(); }   ActionResult actionResult = (actionReturnValue as ActionResult) ?? new ContentResult { Content = Convert.ToString(actionReturnValue, CultureInfo.InvariantCulture) }; return actionResult; }   In the HomeController class above, the DoNothing method will return an instance of the EmptyResult() Renders an empty webpage the GetEmployee() method will return a ContentResult which contains a string that represents the current object Renders the text “MyNameSpace.Controllers.Employee” without quotes. the Add method for a request of /home/add?x=3&y=5 returns a ContentResult Renders the text “8” without quotes. Unit Testing The nice thing about the ActionResult types is in unit testing the controller. We can, without starting a web server, create an instance of the Controller, call the methods and verify that the type returned is the expected ActionResult type. We can then inspect the returned type properties and confirm that it contains the expected values. Enjoy! Sulley: Hey, Mike, this might sound crazy but I don't think that kid's dangerous. Mike: Really? Well, in that case, let's keep it. I always wanted a pet that could kill me.

  Read the article

• SOA 10g Developing a Simple Hello World Process

  - by [email protected]

  Softwares & Hardware Needed Intel Pentium D CPU 3 GHz, 2 GB RAM, Windows XP System ( Thats what i am using ) You could as well use Linux , but please choose High End RAM 10G SOA Suite from Oracle(TM) , Read Installation documents at www.Oracle.com J Developer 10.1.3.3 Official Documents at http://www.oracle.com/technology/products/ias/bpel/index.html java -version Java HotSpot(TM) Client VM (build 1.5.0_06-b05, mixed mode)BPEL Introduction - Developing a Simple Hello World Process  Synchronous BPEL Process      This Exercise focuses on developing a Synchronous Process, which mean you give input to the BPEL Process you get output immediately no waiting at all. The Objective of this exercise is to give input as name and it greets with Hello Appended by that name example, if I give input as "James" the BPEL process returns "Hello James". 1. Open the Oracle JDeveloper click on File -> New Application give the name "JamesApp" you can give your own name if it pleases you. Select the folder where you want to place the application. Click "OK" 2. Right Click on the "JamesApp" in the Application Navigator, Select New Menu. 3. Select "Projects" under "General" and "BPEL Process Project", click "OK" these steps remain same for all BPEL Projects 4. Project Setting Wizard Appears, Give the "Process Name" as "MyBPELProc" and Namespace as http://xmlns.james.com/ MyBPELProc, Select Template as "Synchronous BPEL Process click "Next" 5. Accept the input and output schema names as it is, click "Finish" 6. You would see the BPEL Process Designer, some of the folders such as Integration content and Resources are created and few more files 7. Assign Activity : Allows Assigning values to variables or copying values of one variable to another and also do some string manipulation or mathematical operations In the component palette at extreme right, select Process Activities from the drop down, and drag and drop "Assign" between "receive Input" and "replyOutput" 8. You can right click and edit the Assign activity and give any suitable name "AssignHello", 9. Select "Copy Operation" Tab create "Copy Operation" 10. In the From variables click on expression builder, select input under "input variable", Click on insert into expression bar, complete the concat syntax, Note to use "Ctrl+space bar" inside expression window to Auto Populate the expression as shown in the figure below. What we are actually doing here is concatenating the String "Hello ", with the variable value received through the variable named "input" 11. Observe that once an expression is completed the "To Variable" is assigned to a variable by name "result" 12. Finally the copy variable looks as below 13. It's the time to deploy, start the SOA Suite 14. Establish connection to the Server from JDeveloper, this can be done adding a New Application Server under Connection, give the server name, username and password and test connection. 15. Deploy the "MyBPELProc" to the "default domain" 16. http://localhost:8080/ allows connecting to SOA Suite web portal, click on "BPEL Control" , login with the username "oc4jadmin" password what ever you gave during installation 17. "MyBPELProc" is visisble under "Deployed BPEL Processes" in the "Dashboard" Tab, click on the it 18. Initiate tab open to accept input, enter data such as input is "James" click on "Post XML Button" 19. Click on Visual Flow 20. Click on receive Input , it shows "James" as input received 21. Click on reply Output, it shows "Hello James" so the BPEL process is successfully executed. 22. It may be worth seeing all the instance created everytime a BPEL process is executed by giving some inputs. Purge All button allows to delete all the unwanted previous instances of BPEL process, dont worry it wont delete the BPEL process itself :-) 23. It may also be some importance to understand the XSD File which holds input & output variable names & data types. 24. You could drag n drop variables as elements over sequence at the designer or directly edit the XML Source file. 

  Read the article

• CRM 2011 - Workflows Vs JavaScripts

  - by Kanini

  In the Contact entity, I have the following attributes Preferred email - A read only field of type Email Personal email 1 - An email field Personal email 2 - An email field Work email 1 - An email field Work email 2 - An email field School email - An email field Other email - An email field Preferred email option - An option set with the following values {Personal email 1, Personal email 2, Work email 1, Work email 2, School email and Other email). None of the above mentioned fields are required. Requirement When user picks a value from Preferred email option, we copy the email address available in that field and apply the same in the Preferred email field. Implementation The Solution Architect suggested that we implement the above requirement as a Workflow. The reason he provided was - most of the times, these values are to be populated by an external website and the data is then fed into CRM 2011 system. So, when they update Preferred email option via a Web Service call to CRM, the WF will run and updated the Preferred email field. My argument / solution What will happen if I do not pick a value from the Preferred email Option Set? Do I set it to any of the email addresses that has a value in it? If so, what if there is more than one of the email address fields are populated, i.e., what if Personal email 1 and Work email 1 is populated but no value is picked in the Option Set? What if a value existed in the Preferred email Option Set and I then change it to NULL? Should the field Preferred email (where the text value of email address is stored) be set to Read Only? If not, what if I have picked Personal email 1 in the Option Set and then edit the Preferred email address text field with a completely new email address If yes, then we are enforcing that the preferred email should be one among Personal email 1, Personal email 2, Work email 1, Work email 2, School email or Other email [My preference would be this] What if I had a value of [email protected] in the personal email 1 field and personal email 2 is empty and choose value of Personal email 1 in the drop down for Preferred email (this will set the Preferred email field to [email protected]) and later, I change the value to Personal email 2 in the Preferred email. It overwrites a valid email address with nothing. I agree that it would be highly unlikely that a user will pick Preferred email as Personal email 2 and not have a value in it but nevertheless it is a possible scenario, isn’t it? What if users typed in a value in Personal email 1 but by mistake picked Personal email 2 in the option set and Personal email 2 field had no value in it. Solution The field Preferred email option should be a required field A JS should run whenever Preferred email option is changed. That JS function should set the relevant email field as required (based on the option chosen) and another JS function should be called (see step 3). A JS function should update the value of Preferred email with the value in the email field (as picked in the option set). The JS function should also be run every time someone updates the actual email field which is chosen in the option set. The guys who are managing the external website should update the Preferred email field - surely, if they can update Preferred email option via a Web Service call, it is easy enough to update the Preferred email right? Question Which is a better method? Should it be written as a JS or a WorkFlow? Also, whose responsibility is it to update the Preferred email field when the data flows from an external website? I am new to CRM 2011 but have around 6 years of experience as a CRM consultant (with other products). I do not come from a development background as I started off as a Application Support Engineer but have picked up development in the last couple of years.

  Read the article

• SharePoint.DesignFactory.ContentFiles–building WCM sites

  - by svdoever

  One of the use cases where we use the SharePoint.DesignFactory.ContentFiles tooling is in building SharePoint Publishing (WCM) solutions for SharePoint 2007, SharePoint 2010 and Office365. Publishing solutions are often solutions that have one instance, the publishing site (possibly with subsites), that in most cases need to go through DTAP. If you dissect a publishing site, in most case you have the following findings: The publishing site spans a site collection The branding of the site is specified in the root site, because: Master pages live in the root site (/_catalogs/masterpage) Page layouts live in the root site (/_catalogs/masterpage) The style library lives in the root site ( /Style Library) and contains images, css, javascript, xslt transformations for your CQWP’s, … Preconfigured web parts live in the root site (/_catalogs/wp) The root site and subsites contains a document library called Pages (or your language-specific version of it) containing publishing pages using the page layouts and master pages The site collection contains content types, fields and lists When using the SharePoint.DesignFactory.ContentFiles tooling it is very easy to create, test, package and deploy the artifacts that can be uploaded to the SharePoint content database. This can be done in a fast and simple way without the need to create and deploy WSP packages. If we look at the above list of artifacts we can use SharePoint.DesignFactory.ContentFiles for master pages, page layouts, the style library, web part configurations, and initial publishing pages (these are normally made through the SharePoint web UI). Some artifacts like content types, fields and lists in the above list can NOT be handled by SharePoint.DesignFactory.ContentFiles, because they can’t be uploaded to the SharePoint content database. The good thing is that these artifacts are the artifacts that don’t change that much in the development of a SharePoint Publishing solution. There are however multiple ways to create these artifacts: Use paper script: create them manually in each of the environments based on documentation Automate the creation of the artifacts using (PowerShell) script Develop a WSP package to create these artifacts I’m not a big fan of the third option (see my blog post Thoughts on building deployable and updatable SharePoint solutions). It is a lot of work to create content types, fields and list definitions using all kind of XML files, and it is not allowed to modify these artifacts when in use. I know… SharePoint 2010 has some content type upgrade possibilities, but I think it is just too cumbersome. The first option has the problem that content types and fields get ID’s, and that these ID’s must be used by the metadata on for example page layouts. No problem for SharePoint.DesignFactory.ContentFiles, because it supports deploy-time resolving of these ID’s using PowerShell. For example consider the following metadata definition for the page layout contactpage-wcm.aspx.properties.ps1: Metadata page layout # This script must return a hashtable @{ name=value; ... } of field name-value pairs # for the content file that this script applies to. # On deployment to SharePoint, these values are written as fields in the corresponding list item (if any) # Note that fields must exist; they can be updated but not created or deleted. # This script is called right after the file is deployed to SharePoint.   # You can use the script parameters and arbitrary PowerShell code to interact with SharePoint. # e.g. to calculate properties and values at deployment time.   param([string]$SourcePath, [string]$RelativeUrl, $Context) @{     "ContentTypeId" = $Context.GetContentTypeID('GeneralPage');     "MasterPageDescription" = "Cloud Aviator Contact pagelayout (wcm - don't use)";     "PublishingHidden" = "1";     "PublishingAssociatedContentType" = $Context.GetAssociatedContentTypeInfo('GeneralPage') } The PowerShell functions GetContentTypeID and GetAssociatedContentTypeInfo can at deploy-time resolve the required information from the server we are deploying to. I personally prefer the second option: automate creation through PowerShell, because there are PowerShell scripts available to export content types and fields. An example project structure for a typical SharePoint WCM site looks like: Note that this project uses DualLayout. So if you build Publishing sites using SharePoint, checkout out the completely free SharePoint.DesignFactory.ContentFiles tooling and start flying!

  Read the article

• What is Agile Modeling and why do I need it?

  What is Agile Modeling and why do I need it? Agile Modeling is an add-on to existing agile methodologies like Extreme programming (XP) and Rational Unified Process (RUP). Agile Modeling enables developers to develop a customized software development process that actually meets their current development needs and is flexible enough to adjust in the future. According to Scott Ambler, Agile Modeling consists of five core values that enable this methodology to be effective and light weight Agile Modeling Core Values: Communication Simplicity Feedback Courage Humility Communication is a key component to any successful project. Open communication between stakeholder and the development team is essential when developing new applications or maintaining legacy systems. Agile models promote communication amongst software development teams and stakeholders. Furthermore, Agile Models provide a common understanding of an application for members of a software development team allowing them to have a universal common point of reference. The use of simplicity in Agile Models enables the exploration of new ideas and concepts through the use of basic diagrams instead of investing the time in writing tens or hundreds of lines of code. Feedback in regards to application development is essential. Feedback allows a development team to confirm that the development path is on track. Agile Models allow for quick feedback from shareholders because minimal to no technical expertise is required to understand basic models. Courage is important because you need to make important decisions and be able to change direction by either discarding or refactoring your work when some of your decisions prove inadequate, according to Scott Ambler. As a member of a development team, we must admit that we do not know everything even though some of us think we do. This is where humility comes in to play. Everyone is a knowledge expert in their own specific domain. If you need help with your finances then you would consult an accountant. If you have a problem or are in need of help with a topic why would someone not consult with a subject expert? An effective approach is to assume that everyone involved with your project has equal value and therefore should be treated with respect. Agile Model Characteristics: Purposeful Understandable Sufficiently Accurate Sufficiently Consistent Sufficiently Detailed Provide Positive Value Simple as Possible Just Fulfill Basic Requirements According to Scott Ambler, Agile models are the most effective possible because the time that is invested in the model is just enough effort to complete the job. Furthermore, if a model isn’t good enough yet then additional effort can be invested to get more value out of the model. However if a model is good enough, for the current needs, or surpass the current needs, then any additional work done on the model would be a waste. It is important to remember that good enough is in the eye of the beholder, so this can be tough. In order for Agile Models to work effectively Active Stakeholder need to participation in the modeling process. Finally it is also very important to model with others, this allows for additionally input ensuring that all the shareholders needs are reflected in the models. How can Agile Models be incorporated in to our projects? Agile Models can be incorporated in to our project during the requirement gathering and design phases. As requirements are gathered the models should be updated to incorporate the new project details as they are defined and updated. Additionally, the Agile Models created during the requirement phase can be the bases for the models created during the design phase.  It is important to only add to the model when the changes fit within the agile model characteristics and they do not over complicate the design.

  Read the article

• Grouping data in LINQ with the help of group keyword

  - by vik20000in

  While working with any kind of advanced query grouping is a very important factor. Grouping helps in executing special function like sum, max average etc to be performed on certain groups of data inside the date result set. Grouping is done with the help of the Group method. Below is an example of the basic group functionality.     int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 };         var numberGroups =         from num in numbers         group num by num % 5 into numGroup         select new { Remainder = numGroup.Key, Numbers = numGroup };  In the above example we have grouped the values based on the reminder left over when divided by 5. First we are grouping the values based on the reminder when divided by 5 into the numgroup variable.  numGroup.Key gives the value of the key on which the grouping has been applied. And the numGroup itself contains all the records that are contained in that group. Below is another example to explain the same. string[] words = { "blueberry", "abacus", "banana", "apple", "cheese" };         var wordGroups =         from num in words         group num by num[0] into grp         select new { FirstLetter = grp.Key, Words = grp }; In the above example we are grouping the value with the first character of the string (num[0]). Just like the order operator the group by clause also allows us to write our own logic for the Equal comparison (That means we can group Item by ignoring case also by writing out own implementation). For this we need to pass an object that implements the IEqualityComparer<string> interface. Below is an example. public class AnagramEqualityComparer : IEqualityComparer<string> {     public bool Equals(string x, string y) {         return getCanonicalString(x) == getCanonicalString(y);     }      public int GetHashCode(string obj) {         return getCanonicalString(obj).GetHashCode();     }         private string getCanonicalString(string word) {         char[] wordChars = word.ToCharArray();         Array.Sort<char>(wordChars);         return new string(wordChars);     } }  string[] anagrams = {"from   ", " salt", " earn", "  last   ", " near "}; var orderGroups = anagrams.GroupBy(w => w.Trim(), new AnagramEqualityComparer()); Vikram  

  Read the article

• Drupal Modules for SEO & Content

  - by Aditi

  When we talk about Drupal SEO, there are two things to consider one is about the relevant SEO practices and about appropriate Drupal Modules available. Optimizing your website for search engines is one of the most important aspect of launching & promoting your website especially if ranking matters to you. Understanding SEO For starters, you have begin with Keyword research and then optimize your content according to your findings by tagging, meta tags etc, Drupal modules once installed help you manage a lot of such parameters. Identifying the target keywords Using the Page Title and Token modules PathAuto configuration <H1> heading tags Optimizing Drupal’s default robots.txt file Etc. While Drupal gives you a lot of ability to make your website content worthy & search engine friendly it is important for you to make sure you are not crossing the line or you could get penalized. Modules Overview Drupal Power is at its best when you have these modules & great brain working together. The basic SEO improvements can be achieved easily with the modules enlisted below, but you can win magical rankings if you use them logically & wisely. Understanding your keyword competition & enhancing your content is the basic key to success and ofcourse the modules: Pathauto Automatically create search enging friendly readable URLS from tokens. A token is a piece of data from content, say the author’s username, or the content’s title. For example mysite.com/an-article, rather than mysite.com/node/114 for every node you make. NodeWords Amazingly useful drupal module that allows you to create custom meta tags and descriptions for your nodes, which gives you the ability to target specific keywords and phrases. Page Title Enables you to set an alternative title for the <title></title> tags and for the <h1></h1> tags on a node. Global Redirect Manage content duplication, 301 redirects, and URL validation with this small, but powerful module. Taxonomy manager Make large additions, or changes to taxonomy very easy. This module provides a powerful interface for managing taxonomies. A vocabulary gets displayed in a dynamic tree view, where parent terms can be expanded to list their nested child terms or can be collapsed. robotstxt A robots.txt file is vital for ensuring that search engine spiders don’t index the unwanted areas of your site. This Drupal module gives you the ability to manage your robots.txt file through the CMS admin. xmlsitemap An XML Sitemap lets the search engines index your website content. This module helps in generating and maintaining a complete sitemap for your website and gives you control over exactly which parts of the site you want to be included in the index. It even gives you the ability to automatically submit your sitemap to Google, Yahoo!, Ask.com and Windows Live every time you update a node or at specific interval. Node Import This module allows you to import a set of nodes from a Comma Seperated Values (CSV) or Tab Seperated Values (TSV) text file. Makes it easy to import hundreds-thousands of csv rows and you get to tie up these rows to CCK fields (or locations), and it can file it under the right taxonomy hierarchy. This is Super life saver module.

  Read the article

• Hello World Pagelet

  - by astemkov

  Introduction The goal of this exercise is to give you a basic feel of how you can use Pagelet Producer to proxy a web page We will proxy a simple static Hello World web page, cut one section out of that page and present it as a pagelet that you can later insert on your own application page or to your portal page such as WebCenter Portal space or WebCenter Interaction community page. Hello World sample app This is the static web page we will work with: Let's assume the following: The Hello World web page is running on server http://appserver.company.com:1234/ The Hello World web page path is: http://appserver.company.com:1234/helloworld/ Initial Pagelet Producer setup Let's assume that the Pagelet Producer server is running on http://pageletserver.company.com:8889/pagelets/ First let's check that Pagelet Producer is up and running. In order to do that we just need to access the following URL: http://pageletserver.company.com:8889/pagelets/ And this is what should be returned: Now you can access Pagelet Producer administration screens using this URL: http://pageletserver.company.com:8889/pagelets/admin This is how the UI looks: Now if you connect to the internet via proxy server, you need to configure proxy in Pagelet Producer settings. In the Navigator pane: Jump To - Settings Click on "Proxy" Enter your proxy server configuration: Creating a resource First thing that you need to do is to create a resource for your web page. This will tell Pagelet Producer that all sub-paths of the web page should be proxied. It also will allow you to setup common rules of how your web page should be proxied and will serve as a container for your pagelets. In the Navigator pane: Jump To - Resources Click on any existing resource (ex. welcome_resource) Click on "Create selected type" toolbar button at the top of the Navigator pane Select "Web" in the "Select Producer Type" dialog box and click "OK" Now after the resource is created let's click on "General" sub-item a specify the following values Name = AppServer Source URL = http://appserver.company.com:1234/ Destination URL = /appserver/ Click on "Save" toolbar button at the top of the Navigator pane After the resource is created our web page becomes accessible by the URL: http://pageletserver.company.com:8889/pagelets/appserver/helloworld/ So in original web page address Source URL is replaced with Pagelet Producer URL (http://pageletserver.company.com:8889/pagelets) + Destination URL Creating a pagelet Now let's create "Hello World" pagelet. Under the resource node activate Pagelets subnode Click on "Create selected type" toolbar button at the top of the Navigator pane Click on "General" sub-node of newly created pagelet and specify the following values Name = Hello_World Library = MyLib Library is used for logical grouping. The portals use the "Library" value to group pagelets in their respective UI's. For example, when adding pagelets to a WebCenter Portal space you would see the individual pagelets listed under the "Library" name. URL Suffix = helloworld/index.html this is where the Hello World page html is served from Click on "Save" toolbar button at the top of the Navigator pane The Library name can be anything you want, it doesn't have to match the resource name at all. It is used as a logical grouping of pagelets, and you can include pagelets from multiple resources into the same library or create a new library for each pagelet. After you save the pagelet you can access it here: http://pageletserver.company.com:8889/pagelets/inject/v2/pagelet/MyLib/Hello_World which is : http://pageletserver.company.com:8889/pagelets/inject/v2/pagelet/ + [Library] + [Name] Or to test the injection of a pagelet into iframe you can click on the pagelets "Documentation" sub-node and use "Access Pagelet using REST" URL: This is what we will see: Clipping The pagelet that we just created covers the whole web page, but we want just the "Hello World" segment of it. So let's clip it. Under the Hello_World pagelet node activate Clipper sub-node Click on "Create selected type" toolbar button at the top of the Navigator pane Specify a Name for newly created clipper. For example: "c1" Click on "Content" sub-node of the clipper Click on "Launch Clipper" button New browser window will open By moving a mouse pointer over the web page select the area you want to clip: Click left mouse button - the browser window will disappear and you will see that Clipping Path was automatically generated Now let's save and access the link from the "Documentation" page again Here's our pagelet nicely clipped and ready for being used on your Web Center Space

  Read the article

• Knockout.js - Filtering, Sorting, and Paging

  - by jtimperley

  Originally posted on: http://geekswithblogs.net/jtimperley/archive/2013/07/28/knockout.js---filtering-sorting-and-paging.aspxKnockout.js is fantastic! Maybe I missed it but it appears to be missing flexible filtering, sorting, and pagination of its grids. This is a summary of my attempt at creating this functionality which has been working out amazingly well for my purposes. Before you continue, this post is not intended to teach you the basics of Knockout. They have already created a fantastic tutorial for this purpose. You'd be wise to review this before you continue. http://learn.knockoutjs.com/ Please view the full source code and functional example on jsFiddle. Below you will find a brief explanation of some of the components. http://jsfiddle.net/JTimperley/pyCTN/13/ First we need to create a model to represent our records. This model is a simple container with defined and guaranteed members. function CustomerModel(data) { if (!data) { data = {}; } var self = this; self.id = data.id; self.name = data.name; self.status = data.status; } Next we need a model to represent the page as a whole with an array of the previously defined records. I have intentionally overlooked the filtering and sorting options for now. Note how the filtering, sorting, and pagination are chained together to accomplish all three goals. This strategy allows each of these pieces to be used selectively based on the page's needs. If you only need sorting, just sort, etc. function CustomerPageModel(data) { if (!data) { data = {}; } var self = this; self.customers = ExtractModels(self, data.customers, CustomerModel); var filters = […]; var sortOptions = […]; self.filter = new FilterModel(filters, self.customers); self.sorter = new SorterModel(sortOptions, self.filter.filteredRecords); self.pager = new PagerModel(self.sorter.orderedRecords); } The code currently supports text box and drop down filters. Text box filters require defining the current 'Value' and the 'RecordValue' function to retrieve the filterable value from the provided record. Drop downs allow defining all possible values, the current option, and the 'RecordValue' as before. Once defining these filters, they are automatically added to the screen and any changes to their values will automatically update the results, causing their sort and pagination to be re-evaluated. var filters = [ { Type: "text", Name: "Name", Value: ko.observable(""), RecordValue: function(record) { return record.name; } }, { Type: "select", Name: "Status", Options: [ GetOption("All", "All", null), GetOption("New", "New", true), GetOption("Recently Modified", "Recently Modified", false) ], CurrentOption: ko.observable(), RecordValue: function(record) { return record.status; } } ]; Sort options are more simplistic and are also automatically added to the screen. Simply provide each option's name and value for the sort drop down as well as function to allow defining how the records are compared. This mechanism can easily be adapted for using table headers as the sort triggers. That strategy hasn't crossed my functionality needs at this point. var sortOptions = [ { Name: "Name", Value: "Name", Sort: function(left, right) { return CompareCaseInsensitive(left.name, right.name); } } ]; Paging options are completely contained by the pager model. Because we will be chaining arrays between our filtering, sorting, and pagination models, the following utility method is used to prevent errors when handing an observable array to another observable array. function GetObservableArray(array) { if (typeof(array) == 'function') { return array; }   return ko.observableArray(array); }

  Read the article

• Routes for IIS Classic and Integrated Mode

  - by imran_ku07

       Introduction:             ASP.NET MVC Routing feature makes it very easy to provide clean URLs. You just need to configure routes in global.asax file to create an application with clean URLs. In most cases you define routes works in IIS 6, IIS 7 (or IIS 7.5) Classic and Integrated mode. But in some cases your routes may only works in IIS 7 Integrated mode, like in the case of using extension less URLs in IIS 6 without a wildcard extension map. So in this article I will show you how to create different routes which works in IIS 6 and IIS 7 Classic and Integrated mode.       Description:             Let's say that you need to create an application which must work both in Classic and Integrated mode. Also you have no control to setup a wildcard extension map in IIS. So you need to create two routes. One with extension less URL for Integrated mode and one with a URL with an extension for Classic Mode.   routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults );               Now you have set up two routes, one for Integrated mode and one for Classic mode. Now you only need to ensure that Integrated mode route should only match if the application is running in Integrated mode and Classic mode route should only match if the application is running in Classic mode. For making this work you need to create two custom constraint for Integrated and Classic mode. So replace the above routes with these routes,     routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new ClassicModeConstraint() }// Constraints ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new IntegratedModeConstraint() }// Constraints );            The first route which is for Classic mode adds a ClassicModeConstraint and second route which is for Integrated mode adds a IntegratedModeConstraint. Next you need to add the implementation of these constraint classes.     public class ClassicModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return !HttpRuntime.UsingIntegratedPipeline; } } public class IntegratedModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return HttpRuntime.UsingIntegratedPipeline; } }             HttpRuntime.UsingIntegratedPipeline returns true if the application is running on Integrated mode; otherwise, it returns false. So routes for Integrated mode only matched when the application is running on Integrated mode and routes for Classic mode only matched when the application is not running on Integrated mode.       Summary:             During developing applications, sometimes developers are not sure that whether this application will be host on IIS 6 or IIS 7 (or IIS 7.5) Integrated mode or Classic mode. So it's a good idea to create separate routes for both Classic and Integrated mode so that your application will use extension less URLs where possible and use URLs with an extension where it is not possible to use extension less URLs. In this article I showed you how to create separate routes for IIS Integrated and Classic mode. Hope you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• ASP.NET MVC: Simple view to display contents of DataTable

  - by DigiMortal

  In one of my current projects I have to show reports based on SQL Server views. My code should be not aware of data it shows. It just asks data from view and displays it user. As WebGrid didn’t seem to work with DataTable (at least with no hocus-pocus) I wrote my own very simple view that shows contents of DataTable. I don’t focus right now on data querying questions as this part of my simple generic reporting stuff is still under construction. If the final result is something good enough to share with wider audience I will blog about it for sure. My view uses DataTable as model. It iterates through columns collection to get column names and then iterates through rows and writes out values of all columns. Nothing special, just simple generic view for DataTable. @model System.Data.DataTable @using System.Data; <h2>Report</h2> <table>     <thead>     <tr>     @foreach (DataColumn col in Model.Columns)         {                  <th>@col.ColumnName</th>     }         </tr>     </thead>             <tbody>     @foreach (DataRow row in Model.Rows)         {                 <tr>         @foreach (DataColumn col in Model.Columns)                 {                          <td>@row[col.ColumnName]</td>         }                 </tr>     }         </tbody> </table> In my controller action I have code like this. GetParams() is simple function that reads parameter values from form. This part of my simple reporting system is still under construction but as you can see it will be easy to use for UI developers. public ActionResult TasksByProjectReport() {      var data = _reportService.GetReportData("MEMOS",GetParams());      return View(data); } Before seeing next silver bullet in this example please calm down. It is just plain and simple stuff for simple needs. If you need advanced and powerful reporting system then better use existing components by some vendor.

  Read the article

• Steps for MySQL DB Replication

  - by Manish Agrawal

  Following are the steps for MySQL Replication implementation on Linux machine: Pre-implementation steps for DB Replication:   1.    Identify the databases to be replicated 2.    Identify the tables to be ignored during replication per database for example log tables 3.  Carefully identify and replace the variables and paths(locations) mentioned (in bold) in the commands given below with appropriate values 4.  Schedule the maintenance activity in odd hours as these activities will affect all the databases on Master database server       Implementation steps for DB Replication:     1.    Configure the /etc/my.cnf file on Master database server to enable Binary logging, setting of server id and configuring of dbnames for which logging should be done. [mysqld] log-bin=mysql-bin server-id=1 binlog-do-db = dbname   Note: You can specify multiple DB in binlog-do-db by using comma separated dbname values like: dbname1, dbname2, …, dbnameN   2.    On Master database, Grant Replication Slave Privileges, by executing following command on mysql prompt mysql> GRANT REPLICATION SLAVE ON *.* TO slaveuser@<hostname> identified by ‘slavepassword’;   3.    Stop the Master & Slave database by giving the command      mysqladmin shutdown   4.    Start the Master database by giving the command      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user&     5.    mysql> FLUSH TABLES WITH READ LOCK; Note: Leave the client (putty session) from which you issued the FLUSH TABLES statement running, so that the read lock remains in effect. If you exit the client, the lock is released. 6.    mysql > SHOW MASTER STATUS;          +---------------+----------+--------------+------------------+          | File          | Position | Binlog_Do_DB | Binlog_Ignore_DB |          +---------------+----------+--------------+------------------+          | mysql-bin.003 | 117       | dbname       |                  |          +---------------+----------+--------------+------------------+ Note: Note this information as this will be required while starting of Slave and replication in later steps   7.    Take MySQL dump by giving the following command, In another session window (putty window) run the following command: mysqldump –u user --ignore-table=dbname.tbl_name -–ignore-table=dbname.tbl_name2 --master-data dbname > dbname_dump.db Note: When choosing databases to include in the dump, remember that you will need to filter out databases on each slave that you do not want to include in the replication process.     8.    Unlock the tables on Master by giving following command: mysql> UNLOCK TABLES;   9.    Copy the dump file to Slave DB server   10.  Startup the Slave by using option --skip-slave      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --skip-slave&   11.  Restore the dump file on Slave DB server      mysql –u user dbname < dbname_dump.db   12.  Stop the Slave database by giving the command      mysqladmin shutdown   13.  Configure the /etc/my.cnf file on the Slave database server [mysqld] server-id=2 replicate-ignore-table = dbname.tablename   14.  Start the Slave Mysql Server with 'replicate-do-db=DB name' option.      /usr/local/mysql-5.0.22/bin/mysqld_safe --user=user --replicate-do-db=dbname --skip-slave   15.  Configure the settings at Slave server for Master host name, log filename and position within the log file as shown in Step 6 above Use Change Master statement in the MySQL session mysql> CHANGE MASTER TO MASTER_HOST='<master_host_name>', MASTER_USER='<replication_user_name>', MASTER_PASSWORD='<replication_password>', MASTER_LOG_FILE='<recorded_log_file_name>', MASTER_LOG_POS=<recorded_log_position>;   16.  On Slave Servers mysql prompt give the following command: a.     mysql > START SLAVE; b.    mysql > SHOW SLAVE STATUS;         Note: To stop slave for backup or any other activity you can use the following command on the Slave Servers mysql prompt: mysql> STOP SLAVE     Refer following links for more information on MySQL DB Replication: http://dev.mysql.com/doc/refman/5.0/en/replication-options.html http://crazytoon.com/2008/04/21/mysql-replication-replicate-by-choice/ http://dev.mysql.com/doc/refman/5.0/en/mysqldump.html

  Read the article

• JDBC Triggers

  - by Tim Dexter

  Received a question from a customer last week, they were using the new rollup patch on top of 10.1.3.4.1. What are these boxes for? Don't you know? Surely? Well, they are for ... that new functionality, you know it's in the user docs, that thingmabobby doodah. OK, I dont know either, I can have a guess but let me check first. Serveral IM sessions, emails and a dig through the readme for the new patch and I had my answer. Its not in the official documentation, yet. Leslie is on the case. The two fields were designed to allow an Admin to set a users context attributes before a connection is made to a database and for un-setting the attributes after the connection is broken by the extraction engine. We got a sample from the Enterprise Manager team on how they will be using it with their VPD connections. FUNCTION bip_to_em_user (user_name_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETEMUSERCONTEXT(user_name_in, MGMT_USER.OP_SET_IDENTIFIER); return TRUE; END bip_to_em_user; And used in the jdbc data source definition like this (pre-process function): sysman.mgmt_bip.bip_to_em_user(:xdo_user_name) You, of course can call any function that is going to return a boolean value, another example might be. FUNCTION set_per_process_username (username_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETUSERCONTEXT(username_in); return TRUE; END set_per_process_username Just use your own function/package to set some user context. Very grateful for the mail from Leslie on the EM team's usage but I had to try it out. Rather than set up a VPD, I opted for a simpler test. Can I log the comings and goings of users and their queries using the same pre-process text box. Reaching back into the depths of my developer brain to remember some pl/sql, it was not that deep and I came up with: CREATE OR REPLACE FUNCTION BIPTEST (user_name_in IN VARCHAR2, smode IN VARCHAR2) RETURN BOOLEAN AS BEGIN INSERT INTO LOGTAB VALUES(user_name_in, sysdate,smode); RETURN true; END BIPTEST; To call it in the pre-fetch trigger. BIPTEST(:xdo_user_name) Not going to set the pl/sql world alight I know, but you get the idea. As a new connection is made to the database its logged in the LOGTAB table. The SMODE value just sets if its an entry or an exit. I used the pre- and post- boxes. NAME UPDATE_DATE S_FLAG oracle 14-MAY-10 09.51.34.000000000 AM Start oracle 14-MAY-10 10.23.57.000000000 AM Finish administrator 14-MAY-10 09.51.38.000000000 AM Start administrator 14-MAY-10 09.51.38.000000000 AM Finish oracle 14-MAY-10 09.51.42.000000000 AM Start oracle 14-MAY-10 09.51.42.000000000 AM Finish It works very well, I had some fun trying to find a nasty query for the extraction engine so that the timestamps from in to out actually had a difference. That engine is fast! The only derived value you can pass from BIP is :xdo_user_name. None of the other server values are available. Connection pools are not currently supported but planned for a future release. Now you know what those fields are for and look for some official documentation, rather than my ramblings, coming soon!

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 3.5: Node.js relay

  - by Elton Stoneman

  This is an extension to Part 3 in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer Integration Patterns with Azure Service Bus Relay, Part 3: Anonymous partial-trust consumer In Part 3 I said “there isn't actually a .NET requirement here”, and this post just follows up on that statement. In Part 3 we had an ASP.NET MVC Website making a REST call to an Azure Service Bus service; to show that the REST stuff is really interoperable, in this version we use Node.js to make the secure service call. The code is on GitHub here: IPASBR Part 3.5. The sample code is simpler than Part 3 - rather than code up a UI in Node.js, the sample just relays the REST service call out to Azure. The steps are the same as Part 3: REST call to ACS with the service identity credentials, which returns an SWT; REST call to Azure Service Bus Relay, presenting the SWT; request gets relayed to the on-premise service. In Node.js the authentication step looks like this: var options = { host: acs.namespace() + '-sb.accesscontrol.windows.net', path: '/WRAPv0.9/', method: 'POST' }; var values = { wrap_name: acs.issuerName(), wrap_password: acs.issuerSecret(), wrap_scope: 'http://' + acs.namespace() + '.servicebus.windows.net/' }; var req = https.request(options, function (res) { console.log("statusCode: ", res.statusCode); console.log("headers: ", res.headers); res.on('data', function (d) { var token = qs.parse(d.toString('utf8')); callback(token.wrap_access_token); }); }); req.write(qs.stringify(values)); req.end(); Once we have the token, we can wrap it up into an Authorization header and pass it to the Service Bus call: token = 'WRAP access_token=\"' + swt + '\"'; //... var reqHeaders = { Authorization: token }; var options = { host: acs.namespace() + '.servicebus.windows.net', path: '/rest/reverse?string=' + requestUrl.query.string, headers: reqHeaders }; var req = https.request(options, function (res) { console.log("statusCode: ", res.statusCode); console.log("headers: ", res.headers); response.writeHead(res.statusCode, res.headers); res.on('data', function (d) { var reversed = d.toString('utf8') console.log('svc returned: ' + d.toString('utf8')); response.end(reversed); }); }); req.end(); Running the sample Usual routine to add your own Azure details into Solution Items\AzureConnectionDetails.xml and “Run Custom Tool” on the .tt files. Build and you should be able to navigate to the on-premise service at http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 and get a string response, going to the service direct. Install Node.js (v0.8.14 at time of writing), run FormatServiceRelay.cmd, navigate to http://localhost:8013/reverse?string=abc123, and you should get exactly the same response but through Node.js, via Azure Service Bus Relay to your on-premise service. The console logs the WRAP token returned from ACS and the response from Azure Service Bus Relay which it forwards:

  Read the article

• ODI 11g – Oracle Multi Table Insert

  - by David Allan

  With the IKM Oracle Multi Table Insert you can generate Oracle specific DML for inserting into multiple target tables from a single query result – without reprocessing the query or staging its result. When designing this to exploit the IKM you must split the problem into the reusable parts – the select part goes in one interface (I named SELECT_PART), then each target goes in a separate interface (INSERT_SPECIAL and INSERT_REGULAR). So for my statement below… /*INSERT_SPECIAL interface */ insert  all when 1=1 And (INCOME_LEVEL > 250000) then into SCOTT.CUSTOMERS_NEW (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /* INSERT_REGULAR interface */ when 1=1  then into SCOTT.CUSTOMERS_SPECIAL (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) values (ID, NAME, GENDER, BIRTH_DATE, MARITAL_STATUS, INCOME_LEVEL, CREDIT_LIMIT, EMAIL, USER_CREATED, DATE_CREATED, USER_MODIFIED, DATE_MODIFIED) /*SELECT*PART interface */ select        CUSTOMERS.EMAIL EMAIL,     CUSTOMERS.CREDIT_LIMIT CREDIT_LIMIT,     UPPER(CUSTOMERS.NAME) NAME,     CUSTOMERS.USER_MODIFIED USER_MODIFIED,     CUSTOMERS.DATE_MODIFIED DATE_MODIFIED,     CUSTOMERS.BIRTH_DATE BIRTH_DATE,     CUSTOMERS.MARITAL_STATUS MARITAL_STATUS,     CUSTOMERS.ID ID,     CUSTOMERS.USER_CREATED USER_CREATED,     CUSTOMERS.GENDER GENDER,     CUSTOMERS.DATE_CREATED DATE_CREATED,     CUSTOMERS.INCOME_LEVEL INCOME_LEVEL from    SCOTT.CUSTOMERS   CUSTOMERS where    (1=1) Firstly I create a SELECT_PART temporary interface for the query to be reused and in the IKM assignment I state that it is defining the query, it is not a target and it should not be executed. Then in my INSERT_SPECIAL interface loading a target with a filter, I set define query to false, then set true for the target table and execute to false. This interface uses the SELECT_PART query definition interface as a source. Finally in my final interface loading another target I set define query to false again, set target table to true and execute to true – this is the go run it indicator! To coordinate the statement construction you will need to create a package with the select and insert statements. With 11g you can now execute the package in simulation mode and preview the generated code including the SQL statements. Hopefully this helps shed some light on how you can leverage the Oracle MTI statement. A similar IKM exists for Teradata. The ODI IKM Teradata Multi Statement supports this multi statement request in 11g, here is an extract from the paper at www.teradata.com/white-papers/born-to-be-parallel-eb3053/ Teradata Database offers an SQL extension called a Multi-Statement Request that allows several distinct SQL statements to be bundled together and sent to the optimizer as if they were one. Teradata Database will attempt to execute these SQL statements in parallel. When this feature is used, any sub-expressions that the different SQL statements have in common will be executed once, and the results shared among them. It works in the same way as the ODI MTI IKM, multiple interfaces orchestrated in a package, each interface contributes some SQL, the last interface in the chain executes the multi statement.

  Read the article

• Stretch in multiple components using af:popup, af:region, af:panelTabbed

  - by Arvinder Singh

  Case study: I have a pop-up(dialogue) that contains a region(separate taskflow) showing a tab. The contents of this tab is in a region having a separate taskflow. The jsff page of this taskflow contains a panelSplitter which in turn contains a table. In short the components are : pop-up(dialogue) --> region(separate taskflow) --> tab --> region(separate taskflow) --> panelSplitter --> table At times the tab is not displayed with 100% width or the table in panelSplitter is not 100% visible or the splitter is not visible. Maintaining the stretch for all the components is difficult......not any more!!! Below is the solution that you can make use of in many similar scenarios. I am mentioning the major code snippets affecting the stretch and alignment. pop-up: <af:popup> <af:dialog id="d2" type="none" title="" inlineStyle="width:1200px"> <af:region value="#{bindings.PriceChangePopupFlow1.regionModel}" id="r1"/> </af:dialog> The above region is a jsff containing multiple tabs. I am showing code for a single tab. I kept the tab in a panelStretchLayout. <af:panelStretchLayout id="psl1" topHeight="300px" styleClass="AFStretchWidth"> <af:panelTabbed id="pt1"> <af:showDetailItem text="PO Details" id="sdi1" stretchChildren="first" > <af:region value="#{bindings.PriceChangePurchaseOrderFlow1.regionModel}" id="r1" binding="# {pageFlowScope.priceChangePopupBean.poDetailsRegion}" /> This "region" displays a .jsff containing a table in a panelSplitter. <af:panelSplitter id="ps1"  orientation="horizontal" splitterPosition="700"> <f:facet name="first"> <af:panelHeader text="PurchaseOrder" id="ph1"> <af:table id="md1" rows="#{bindings.PurchaseOrderVO.rangeSize}" That's it!!! We're done... Note the stretchChildren="first" attribute in the af:showDetailItem. That does the trick for us. Oracle docs say the following about stretchChildren :  Valid Values: none, first The stretching behavior for children. Acceptable values include: "none": does not attempt to stretch any children (the default value and the value you need to use if you have more than a single child; also the value you need to use if the child does not support being stretched) "first": stretches the first child (not to be used if you have multiple children as such usage will produce unreliable results; also not to be used if the child does not support being stretched)

  Read the article

• XNA Health Bar continually decreasing

  - by Craig

  As per the Health bar tutorial on ... http://www.xnadevelopment.com/tutorials/notsohealthy/NotSoHealthy.shtml I have set up the above, how do I make it decrease by 1 health per second? I want to create a mini survival game, and this is an important factor. Where am i going wrong? I want it to visibly decrease every second. using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Health { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D healthBar; int currentHealth = 100; float seconds; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); healthBar = Content.Load<Texture2D>("HealthBar"); // TODO: use this.Content to load your game content here } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here currentHealth = (int)MathHelper.Clamp(currentHealth, 0, 100); seconds += (float)gameTime.ElapsedGameTime.TotalSeconds; if (seconds >= 1) { currentHealth -= 1; } seconds = 0; base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); spriteBatch.Begin(); spriteBatch.Draw(healthBar, new Rectangle(this.Window.ClientBounds.Width / 2 - healthBar.Width / 2, 30, healthBar.Width, 44), new Rectangle(0, 45, healthBar.Width, 44), Color.Gray); spriteBatch.Draw(healthBar, new Rectangle(this.Window.ClientBounds.Width / 2 - healthBar.Width / 2, 30, (int)(healthBar.Width * ((double)currentHealth / 100)), 44), new Rectangle(0, 45, healthBar.Width, 44), Color.Red); spriteBatch.Draw(healthBar, new Rectangle(this.Window.ClientBounds.Width / 2 - healthBar.Width / 2, 30, healthBar.Width, 44), new Rectangle(0, 0, healthBar.Width, 44), Color.White); spriteBatch.End(); base.Draw(gameTime); } } } Cheers!

  Read the article

• Tile engine Texture not updating when numbers in array change

  - by Corey

  I draw my map from a txt file. I am using java with slick2d library. When I print the array the number changes in the array, but the texture doesn't change. public class Tiles { public Image[] tiles = new Image[5]; public int[][] map = new int[64][64]; public Image grass, dirt, fence, mound; private SpriteSheet tileSheet; public int tileWidth = 32; public int tileHeight = 32; public void init() throws IOException, SlickException { tileSheet = new SpriteSheet("assets/tiles.png", tileWidth, tileHeight); grass = tileSheet.getSprite(0, 0); dirt = tileSheet.getSprite(7, 7); fence = tileSheet.getSprite(2, 0); mound = tileSheet.getSprite(2, 6); tiles[0] = grass; tiles[1] = dirt; tiles[2] = fence; tiles[3] = mound; int x=0, y=0; BufferedReader in = new BufferedReader(new FileReader("assets/map.dat")); String line; while ((line = in.readLine()) != null) { String[] values = line.split(","); x = 0; for (String str : values) { int str_int = Integer.parseInt(str); map[x][y]=str_int; //System.out.print(map[x][y] + " "); x++; } //System.out.println(""); y++; } in.close(); } public void update(GameContainer gc) { } public void render(GameContainer gc) { for(int y = 0; y < map.length; y++) { for(int x = 0; x < map[0].length; x ++) { int textureIndex = map[x][y]; Image texture = tiles[textureIndex]; texture.draw(x*tileWidth,y*tileHeight); } } } } Mouse Picking Where I change the number in the array Input input = gc.getInput(); gc.getInput().setOffset(cameraX-400, cameraY-300); float mouseX = input.getMouseX(); float mouseY = input.getMouseY(); double mousetileX = Math.floor((double)mouseX/tiles.tileWidth); double mousetileY = Math.floor((double)mouseY/tiles.tileHeight); double playertileX = Math.floor(playerX/tiles.tileWidth); double playertileY = Math.floor(playerY/tiles.tileHeight); double lengthX = Math.abs((float)playertileX - mousetileX); double lengthY = Math.abs((float)playertileY - mousetileY); double distance = Math.sqrt((lengthX*lengthX)+(lengthY*lengthY)); if(input.isMousePressed(Input.MOUSE_LEFT_BUTTON) && distance < 4) { System.out.println("Clicked"); if(tiles.map[(int)mousetileX][(int)mousetileY] == 1) { tiles.map[(int)mousetileX][(int)mousetileY] = 0; } } I never ask a question until I have tried to figure it out myself. I have been stuck with this problem for two weeks. It's not like this site is made for asking questions or anything. So if you actually try to help me instead of telling me to use a debugger thank you. You either get told you have too much or too little code. Nothing is never enough for the people on here it's as bad as something like reddit. Idk what is wrong all my textures work when I render them it just doesn't update when the number in the array changes. I am obviously debugging when I say that I was printing the array and the number is changing like it should, so it's not a problem with my mouse picking code. It is a problem with my textures, but I don't know what because they all render correctly. That is why I need help.

  Read the article

• Lies, damned lies, and statistics Part 2

  - by Maria Colgan

  There was huge interest in our OOW session last year on Managing Optimizer Statistics. It seems statistics and the maintenance of them continues to baffle people. In order to help dispel the mysteries surround statistics management we have created a two part white paper series on Optimizer statistics.  Part one of this series was released in November last years and describes in detail, with worked examples, the different concepts of Optimizer statistics. Today we have published part two of the series, which focuses on the best practices for gathering statistics, and examines specific use cases including, the fears that surround histograms and statistics management of volatile tables like Global Temporary Tables. Here is a quick look at the Introduction and the start of the paper. You can find the full paper here. Happy Reading! Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif";} Introduction The Oracle Optimizer examines all of the possible plans for a SQL statement and picks the one with the lowest cost, where cost represents the estimated resource usage for a given plan. In order for the Optimizer to accurately determine the cost for an execution plan it must have information about all of the objects (table and indexes) accessed in the SQL statement as well as information about the system on which the SQL statement will be run. This necessary information is commonly referred to as Optimizer statistics. Understanding and managing Optimizer statistics is key to optimal SQL execution. Knowing when and how to gather statistics in a timely manner is critical to maintaining acceptable performance. This whitepaper is the second of a two part series on Optimizer statistics. The first part of this series, Understanding Optimizer Statistics, focuses on the concepts of statistics and will be referenced several times in this paper as a source of additional information. This paper will discuss in detail, when and how to gather statistics for the most common scenarios seen in an Oracle Database. The topics are · How to gather statistics · When to gather statistics · Improving the efficiency of gathering statistics · When not to gather statistics · Gathering other types of statistics How to gather statistics The preferred method for gathering statistics in Oracle is to use the supplied automatic statistics-gathering job. Automatic statistics gathering job The job collects statistics for all database objects, which are missing statistics or have stale statistics by running an Oracle AutoTask task during a predefined maintenance window. Oracle internally prioritizes the database objects that require statistics, so that those objects, which most need updated statistics, are processed first. The automatic statistics-gathering job uses the DBMS_STATS.GATHER_DATABASE_STATS_JOB_PROC procedure, which uses the same default parameter values as the other DBMS_STATS.GATHER_*_STATS procedures. The defaults are sufficient in most cases. However, it is occasionally necessary to change the default value of one of the statistics gathering parameters, which can be accomplished by using the DBMS_STATS.SET_*_PREF procedures. Parameter values should be changed at the smallest scope possible, ideally on a per-object bases. You can find the full paper here. Happy Reading! +Maria Colgan

  Read the article

• SAB BizTalk Archiving Pipeline Component - Codeplex

  - by Stuart Brierley

  In an effort to give a little more to the BizTalk development community, I have created my first Codeplex project. The SAB BizTalk Archiving Pipeline Component was written using Visual Studio 2010 with BizTalk Server 2010 intended as the target platform.  It is currently at version 0.1, meaning that I have not yet completed all the intended functionality and have so far carried out a limited number of tests.  It does however archive files within the bounds of the functionailty so far implemented and seems to be stable in use. It is based on a recent evolution of a basic archiving component that I wrote in the past, and it is my hope that it will continue to evolve in the coming months. This work was inspired by some old posts by Gilles Zunino and Jeff Lynch.   You can download the documentation, source code or component dll from Codeplex, but to give you a taste here is the first section of the documentation to whet your appetite: SAB BizTalk Archiving Pipeline Component   The SAB BizTalk Archiving Pipeline Component has been developed to allow custom piplelines to be created that can archive messages at any stage of pipeline processing.   It works in both receive and send pipelines and will archive messages to file based on the configuration applied to the component in the BizTalk Administration Console.   The Archiving Pipeline Component has been coded for use with BizTalk Server 2010. Use with other versions of BizTalk has not been tested.   The Archiving Pipeline component is supplied as a dll file that should be placed in the BizTalk Server Pipeline Components folder. It can then be used when developing custom pipelines to be deployed as a part of your BizTalk Server applications.   This version of the component allows you to use a number of generic messaging macros and also a small number that are specific to the FILE adapter. It is intended to extend these macros to cover context properties from other adapters in future releases.     Archive Pipeline Parameters As with all pipeline components, the following parameters can be set when creating your custom pipeline and at runtime via the administration console.   Enabled:              Enables and disables the archive process.                                 True; messages will be archived.   False; messages will be passed to the next stage in the pipeline without performing any processing.   File Name:          The file name of the archived message.   Allows the component to build the archive filename at run-time; based on the values entered, the permitted macros and data extracted from the message context properties.   e.g.        %FileReceivedFileName%-%InterchangeSequenceNumber%   File Mask:           The extension to be added to the File Name following all Macro processing.   e.g.        .xml   File Path:             The path on which the archived message should be saved.   Allows the component to build the archive directory at run-time; based on the values entered, permitted macros and data extracted from the message context properties.   e.g.        C:\Archive\%ReceivePortName%\%Year%\%Month%\%Day%\                   \\ArchiveShare\%ReceivePortName%\%Date%\     Overwrite:          Enables and disables existing file overwrites.   True; any existing file with the same File Path/Name combination (following macro replacement) will be overwritten.   False; any existing file with the same File Path/Name combination (following macro replacement) will not be overwritten.  The current message will be archived with a GUID appended to the File Name.

  Read the article

• SPARC T4-2 Produces World Record Oracle Essbase Aggregate Storage Benchmark Result

  - by Brian

  Significance of Results Oracle's SPARC T4-2 server configured with a Sun Storage F5100 Flash Array and running Oracle Solaris 10 with Oracle Database 11g has achieved exceptional performance for the Oracle Essbase Aggregate Storage Option benchmark. The benchmark has upwards of 1 billion records, 15 dimensions and millions of members. Oracle Essbase is a multi-dimensional online analytical processing (OLAP) server and is well-suited to work well with SPARC T4 servers. The SPARC T4-2 server (2 cpus) running Oracle Essbase 11.1.2.2.100 outperformed the previous published results on Oracle's SPARC Enterprise M5000 server (4 cpus) with Oracle Essbase 11.1.1.3 on Oracle Solaris 10 by 80%, 32% and 2x performance improvement on Data Loading, Default Aggregation and Usage Based Aggregation, respectively. The SPARC T4-2 server with Sun Storage F5100 Flash Array and Oracle Essbase running on Oracle Solaris 10 achieves sub-second query response times for 20,000 users in a 15 dimension database. The SPARC T4-2 server configured with Oracle Essbase was able to aggregate and store values in the database for a 15 dimension cube in 398 minutes with 16 threads and in 484 minutes with 8 threads. The Sun Storage F5100 Flash Array provides more than a 20% improvement out-of-the-box compared to a mid-size fiber channel disk array for default aggregation and user-based aggregation. The Sun Storage F5100 Flash Array with Oracle Essbase provides the best combination for large Oracle Essbase databases leveraging Oracle Solaris ZFS and taking advantage of high bandwidth for faster load and aggregation. Oracle Fusion Middleware provides a family of complete, integrated, hot pluggable and best-of-breed products known for enabling enterprise customers to create and run agile and intelligent business applications. Oracle Essbase's performance demonstrates why so many customers rely on Oracle Fusion Middleware as their foundation for innovation. Performance Landscape System Data Size(millions of items) Database Load(minutes) Default Aggregation(minutes) Usage Based Aggregation(minutes) SPARC T4-2, 2 x SPARC T4 2.85 GHz 1000 149 398* 55 Sun M5000, 4 x SPARC64 VII 2.53 GHz 1000 269 526 115 Sun M5000, 4 x SPARC64 VII 2.4 GHz 400 120 448 18 * – 398 mins with CALCPARALLEL set to 16; 484 mins with CALCPARALLEL threads set to 8 Configuration Summary Hardware Configuration: 1 x SPARC T4-2 2 x 2.85 GHz SPARC T4 processors 128 GB memory 2 x 300 GB 10000 RPM SAS internal disks Storage Configuration: 1 x Sun Storage F5100 Flash Array 40 x 24 GB flash modules SAS HBA with 2 SAS channels Data Storage Scheme Striped - RAID 0 Oracle Solaris ZFS Software Configuration: Oracle Solaris 10 8/11 Installer V 11.1.2.2.100 Oracle Essbase Client v 11.1.2.2.100 Oracle Essbase v 11.1.2.2.100 Oracle Essbase Administration services 64-bit Oracle Database 11g Release 2 (11.2.0.3) HP's Mercury Interactive QuickTest Professional 9.5.0 Benchmark Description The objective of the Oracle Essbase Aggregate Storage Option benchmark is to showcase the ability of Oracle Essbase to scale in terms of user population and data volume for large enterprise deployments. Typical administrative and end-user operations for OLAP applications were simulated to produce benchmark results. The benchmark test results include: Database Load: Time elapsed to build a database including outline and data load. Default Aggregation: Time elapsed to build aggregation. User Based Aggregation: Time elapsed of the aggregate views proposed as a result of tracked retrieval queries. Summary of the data used for this benchmark: 40 flat files, each of size 1.2 GB, 49.4 GB in total 10 million rows per file, 1 billion rows total 28 columns of data per row Database outline has 15 dimensions (five of them are attribute dimensions) Customer dimension has 13.3 million members 3 rule files Key Points and Best Practices The Sun Storage F5100 Flash Array has been used to accelerate the application performance. Setting data load threads (DLTHREADSPREPARE) to 64 and Load Buffer to 6 improved dataloading by about 9%. Factors influencing aggregation materialization performance are "Aggregate Storage Cache" and "Number of Threads" (CALCPARALLEL) for parallel view materialization. The optimal values for this workload on the SPARC T4-2 server were: Aggregate Storage Cache: 32 GB CALCPARALLEL: 16   See Also Oracle Essbase Aggregate Storage Option Benchmark on Oracle's SPARC T4-2 Server oracle.com Oracle Essbase oracle.com OTN SPARC T4-2 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 28 August 2012.

  Read the article

• Spritesheet per pixel collision XNA

  - by Jixi

  So basically i'm using this: public bool IntersectPixels(Rectangle rectangleA, Color[] dataA,Rectangle rectangleB, Color[] dataB) { int top = Math.Max(rectangleA.Top, rectangleB.Top); int bottom = Math.Min(rectangleA.Bottom, rectangleB.Bottom); int left = Math.Max(rectangleA.Left, rectangleB.Left); int right = Math.Min(rectangleA.Right, rectangleB.Right); for (int y = top; y < bottom; y++) { for (int x = left; x < right; x++) { Color colorA = dataA[(x - rectangleA.Left) + (y - rectangleA.Top) * rectangleA.Width]; Color colorB = dataB[(x - rectangleB.Left) + (y - rectangleB.Top) * rectangleB.Width]; if (colorA.A != 0 && colorB.A != 0) { return true; } } } return false; } In order to detect collision, but i'm unable to figure out how to use it with animated sprites. This is my animation update method: public void AnimUpdate(GameTime gameTime) { if (!animPaused) { animTimer += (float)gameTime.ElapsedGameTime.TotalMilliseconds; if (animTimer > animInterval) { currentFrame++; animTimer = 0f; } if (currentFrame > endFrame || endFrame <= currentFrame || currentFrame < startFrame) { currentFrame = startFrame; } objRect = new Rectangle(currentFrame * TextureWidth, frameRow * TextureHeight, TextureWidth, TextureHeight); origin = new Vector2(objRect.Width / 2, objRect.Height / 2); } } Which works with multiple rows and columns. and how i call the intersect: public bool IntersectPixels(Obj me, Vector2 pos, Obj o) { Rectangle collisionRect = new Rectangle(me.objRect.X, me.objRect.Y, me.objRect.Width, me.objRect.Height); collisionRect.X += (int)pos.X; collisionRect.Y += (int)pos.Y; if (IntersectPixels(collisionRect, me.TextureData, o.objRect, o.TextureData)) { return true; } return false; } Now my guess is that i have to update the textureData everytime the frame changes, no? If so then i already tried it and miserably failed doing so :P Any hints, advices? If you need to see any more of my code just let me know and i'll update the question. Updated almost functional collisionRect: collisionRect = new Rectangle((int)me.Position.X, (int)me.Position.Y, me.Texture.Width / (int)((me.frameCount - 1) * me.TextureWidth), me.Texture.Height); What it does now is "move" the block up 50%, shouldn't be too hard to figure out. Update: Alright, so here's a functional collision rectangle(besides the height issue) collisionRect = new Rectangle((int)me.Position.X, (int)me.Position.Y, me.TextureWidth / (int)me.frameCount - 1, me.TextureHeight); Now the problem is that using breakpoints i found out that it's still not getting the correct color values of the animated sprite. So it detects properly but the color values are always: R:0 G:0 B:0 A:0 ??? disregard that, it's not true afterall =P For some reason now the collision area height is only 1 pixel..

  Read the article

• AdventureWorks2012 now available for all on SQL Azure

  - by jamiet

  Three days ago I tweeted this: Idea. MSFT could host read-only copies of all the [AdventureWorks] DBs up on #sqlazure for the SQL community to use. RT if agree #sqlfamily — Jamie Thomson (@jamiet) March 24, 2012 Evidently I wasn't the only one that thought this was a good idea because as you can see from the screenshot that tweet has, so far, been retweeted more than fifty times. Clearly there is a desire to see the AdventureWorks databases made available for the community to noodle around on so I am pleased to announce that as of today you can do just that - [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use* for their own means. *By use I mean "issue some SELECT statements". You don't have permission to issue INSERTs, UPDATEs, DELETEs or EXECUTEs I'm afraid - if you want to do that then you can get the bits and host it yourself. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected]: Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more that we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. OK, with the prickly subject of begging for cash out of the way let me share the details that you need to connect to [AdventureWorks2012] on SQL Azure: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly That user sqlfamily has all the permissions required to enable you to query away to your heart's content. Here is the code that I used to set it up: CREATE USER sqlfamily FOR LOGIN sqlfamily;CREATE ROLE sqlfamilyrole;EXEC sp_addrolemember 'sqlfamilyrole','sqlfamily';GRANT VIEW DEFINITION ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT VIEW DATABASE STATE ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT SHOWPLAN TO sqlfamilyrole;EXEC sp_addrolemember 'db_datareader','sqlfamilyrole'; You can connect to the database using SQL Server Management Studio (instructions to do that are provided at Walkthrough: Connecting to SQL Azure via the SSMS) or you can use the web interface at https://mhknbn2kdz.database.windows.net: Lastly, just for a bit of fun I created a table up there called [dbo].[SqlFamily] into which you can leave a small calling card. Simply execute the following SQL statement (changing the values of course): INSERT [dbo].[SqlFamily]([Name],[Message],[TwitterHandle],[BlogURI])VALUES ('Your name here','Some Message','your twitter handle (optional)','Blog URI (optional)'); [Id] is an IDENTITY field and there is a default constraint on [DT] hence there is no need to supply a value for those. Note that you only have INSERT permissions, not UPDATE or DELETE so make sure you get it right first time! Any offensive or distasteful remarks will of course be deleted :) Thank you for reading this far and have fun using AdventureWorks on Azure. I hope it proves to be useful for some of you. @jamiet AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• Required Parameters [SSIS Denali]

  - by jamiet

  SQL Server Integration Services (SSIS) in its 2005 and 2008 incarnations expects you to set a property values within your package at runtime using Configurations. SSIS developers tend to have rather a lot of issues with SSIS configurations; in this blog post I am going to highlight one of those problems and how it has been alleviated in SQL Server code-named Denali.   A configuration is a property path/value pair that exists outside of a package, typically within SQL Server or in a collection of one or more configurations in a file called a .dtsConfig file. Within the package one defines a pointer to a configuration that says to the package “When you execute, go and get a configuration value from this location” and if all goes well the package will fetch that configuration value as it starts to execute and you will see something like the following in your output log: Information: 0x40016041 at Package: The package is attempting to configure from the XML file "C:\Configs\MyConfig.dtsConfig". Unfortunately things DON’T always go well, perhaps the .dtsConfig file is unreachable or the name of the SQL Sever holding the configuration value has been defined incorrectly – any one of a number of things can go wrong. In this circumstance you might see something like the following in your log output instead: Warning: 0x80012014 at Package: The configuration file "C:\Configs\MyConfig.dtsConfig" cannot be found. Check the directory and file name. The problem that I want to draw attention to here though is that your package will ignore the fact it can’t find the configuration and executes anyway. This is really really bad because the package will not be doing what it is supposed to do and worse, if you have not isolated your environments you might not even know about it. Can you imagine a package executing for months and all the while inserting data into the wrong server? Sounds ridiculous but I have absolutely seen this happen and the root cause was that no-one picked up on configuration warnings like the one above. Happily in SSIS code-named Denali this problem has gone away as configurations have been replaced with parameters. Each parameter has a property called ‘Required’: Any parameter with Required=True must have a value passed to it when the package executes. Any attempt to execute the package will result in an error. Here we see that error when attempting to execute using the SSMS UI: and similarly when executing using T-SQL: Error is: Msg 27184, Level 16, State 1, Procedure prepare_execution, Line 112 In order to execute this package, you need to specify values for the required parameters.   As you can see, SSIS code-named Denali has mechanisms built-in to prevent the problem I described at the top of this blog post. Specifying a Parameter required means that any packages in that project cannot execute until a value for the parameter has been supplied. This is a very good thing. I am loathe to make recommendations so early in the development cycle but right now I’m thinking that all Project Parameters should have Required=True, certainly any that are used to define external locations should be anyway. @Jamiet

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >