Search Results

Search found 18865 results on 755 pages for 'distinct values'.

Page 302/755 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• .Net Reflector 6.5 EAP now available

  - by CliveT

  With the release of CLR 4 being so close, we’ve been working hard on getting the new C# and VB language features implemented inside Reflector. The work isn’t complete yet, but we have some of the features working. Most importantly, there are going to be changes to the Reflector object model, and we though it would be useful for people to see the changes and have an opportunity to comment on them. Before going any further, we should tell you what the EAP contains that’s different from the released version. A number of bugs have been fixed, mainly bugs that were raised via the forum. This is slightly offset by the fact that this EAP hasn’t had a whole lot of testing and there may have been new bugs introduced during the development work we’ve been doing. The C# language writer has been changed to display in and out co- and contra-variance markers on interfaces and delegates, and to display default values for optional parameters in method definitions. We also concisely display values passed by reference into COM calls. However, we do not change callsites to display calls using named parameters; this looks like hard work to get right. The forthcoming version of the C# language introduces dynamic types and dynamic calls. The new version of Reflector should display a dynamic call rather than the generated C#: dynamic target = MyTestObject(); target.Hello("Mum"); We have a few bugs in this area where we are not casting to dynamic when necessary. These have been fixed on a branch and should make their way into the next EAP. To support the dynamic features, we’ve added the types IDynamicMethodReferenceExpression, IDynamicPropertyIndexerExpression, and IDynamicPropertyReferenceExpression to the object model. These types, based on the versions without “Dynamic” in the name, reflect the fact that we don’t have full information about the method that is going to be called, but only have its name (as a string). These interfaces are going to change – in an internal version, they have been extended to include information about which parameter positions use runtime types and which use compile time types. There’s also the interface, IDynamicVariableDeclaration, that can be used to determine if a particular variable is used at dynamic call sites as a target. A couple of these language changes have also been added to the Visual Basic language writer. The new features are exposed only when the optimization level is set to .NET 4. When the level is set this high, the other standard language writers will simply display a message to say that they do not handle such an optimization level. Reflector Pro now has 4.0 as an optional compilation target and we have done some work to get the pdb generation right for these new features. The EAP version of Reflector no longer installs the add-in on startup. The first time you run the EAP, it displays the integration options dialog. You can use the checkboxes to select the versions of Visual Studio into which you want to install the EAP version. Note that you can only have one version of Reflector Pro installed in Visual Studio; if you install into a Visual Studio that has another version installed, the previous version will be removed. Please try it out and send your feedback to the EAP forum.

  Read the article

• Normalisation and 'Anima notitia copia' (Soul of the Database)

  - by Phil Factor

  (A Guest Editorial for Simple-Talk) The other day, I was staring  at the sys.syslanguages  table in SQL Server with slightly-raised eyebrows . I’d just been reading Chris Date’s  interesting book ‘SQL and Relational Theory’. He’d made the point that you’re not necessarily doing relational database operations by using a SQL Database product.  The same general point was recently made by Dino Esposito about ASP.NET MVC.  The use of ASP.NET MVC doesn’t guarantee you a good application design: It merely makes it possible to test it. The way I’d describe the sentiment in both cases is ‘you can hit someone over the head with a frying-pan but you can’t call it cooking’. SQL enables you to create relational databases. However,  even if it smells bad, it is no crime to do hideously un-relational things with a SQL Database just so long as it’s necessary and you can tell the difference; not only that but also only if you’re aware of the risks and implications. Naturally, I’ve never knowingly created a database that Codd would have frowned at, but around the edges are interfaces and data feeds I’ve written  that have caused hissy fits amongst the Normalisation fundamentalists. Part of the problem for those who agonise about such things  is the misinterpretation of Atomicity.  An atomic value is one for which, in the strange virtual universe you are creating in your database, you don’t have any interest in any of its component parts.  If you aren’t interested in the electrons, neutrinos,  muons,  or  taus, then  an atom is ..er.. atomic. In the same way, if you are passed a JSON string or XML, and required to store it in a database, then all you need to do is to ask yourself, in your role as Anima notitia copia (Soul of the database) ‘have I any interest in the contents of this item of information?’.  If the answer is ‘No!’, or ‘nequequam! Then it is an atomic value, however complex it may be.  After all, you would never have the urge to store the pixels of images individually, under the misguided idea that these are the atomic values would you?  I would, of course,  ask the ‘Anima notitia copia’ rather than the application developers, since there may be more than one application, and the applications developers may be designing the application in the absence of full domain knowledge, (‘or by the seat of the pants’ as the technical term used to be). If, on the other hand, the answer is ‘sure, and we want to index the XML column’, then we may be in for some heavy XML-shredding sessions to get to store the ‘atomic’ values and ensure future harmony as the application develops. I went back to looking at the sys.syslanguages table. It has a months column with the months in a delimited list January,February,March,April,May,June,July,August,September,October,November,December This is an ordered list. Wicked? I seem to remember that this value, like shortmonths and days, is treated as a ‘thing’. It is merely passed off to an external  C++ routine in order to format a date in a particular language, and never accessed directly within the database. As far as the database is concerned, it is an atomic value.  There is more to normalisation than meets the eye.

  Read the article

• SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

  - by jorg

  We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

  Read the article

• Generate a merge statement from table structure

  - by Nigel Rivett

  This code generates a merge statement joining on he natural key and checking all other columns to see if they have changed. The full version deals with type 2 processing and an audit trail but this version is useful. Just the insert or update part is handy too. Change the table at the top (spt_values in master in the version) and the join columns for the merge in @nk. The output generated is at the top and the code to run to generate it below. Output merge spt_values a using spt_values b on a.name = b.name and a.number = b.number and a.type = b.type when matched and (1=0 or (a.low b.low) or (a.low is null and b.low is not null) or (a.low is not null and b.low is null) or (a.high b.high) or (a.high is null and b.high is not null) or (a.high is not null and b.high is null) or (a.status b.status) or (a.status is null and b.status is not null) or (a.status is not null and b.status is null) ) then update set low = b.low , high = b.high , status = b.status when not matched by target then insert ( name , number , type , low , high , status ) values ( b.name , b.number , b.type , b.low , b.high , b.status ); Generator set nocount on declare @t varchar(128) = 'spt_values' declare @i int = 0 -- this is the natural key on the table used for the merge statement join declare @nk table (ColName varchar(128)) insert @nk select 'Number' insert @nk select 'Name' insert @nk select 'Type' declare @cols table (seq int, nkseq int, type int, colname varchar(128)) ;with cte as ( select ordinal_position, type = case when columnproperty(object_id(@t), COLUMN_NAME,'IsIdentity') = 1 then 3 when nk.ColName is not null then 1 else 0 end, COLUMN_NAME from information_schema.columns c left join @nk nk on c.column_name = nk.ColName where table_name = @t ) insert @cols (seq, nkseq, type, colname) select ordinal_position, row_number() over (partition by type order by ordinal_position) , type, COLUMN_NAME from cte declare @result table (i int, j int, k int, data varchar(500)) select @i = @i + 1 insert @result (i, data) select @i, 'merge ' + @t + ' a' select @i = @i + 1 insert @result (i, data) select @i, ' using cte b' select @i = @i + 1 insert @result (i, j, data) select @i, nkseq, ' ' + case when nkseq = 1 then 'on' else 'and' end + ' a.' + ColName + ' = b.' + ColName from @cols where type = 1 select @i = @i + 1 insert @result (i, data) select @i, ' when matched and (1=0' select @i = @i + 1 insert @result (i, j, k, data) select @i, seq, 1, ' or (a.' + ColName + ' b.' + ColName + ')' + ' or (a.' + ColName + ' is null and b.' + ColName + ' is not null)' + ' or (a.' + ColName + ' is not null and b.' + ColName + ' is null)' from @cols where type 1 select @i = @i + 1 insert @result (i, data) select @i, ' )' select @i = @i + 1 insert @result (i, data) select @i, ' then update set' select @i = @i + 1 insert @result (i, j, data) select @i, nkseq, ' ' + case when nkseq = 1 then ' ' else ', ' end + colname + ' = b.' + colname from @cols where type = 0 select @i = @i + 1 insert @result (i, data) select @i, ' when not matched by target then insert' select @i = @i + 1 insert @result (i, data) select @i, ' (' select @i = @i + 1 insert @result (i, j, data) select @i, seq, ' ' + case when seq = 1 then ' ' else ', ' end + colname from @cols where type 3 select @i = @i + 1 insert @result (i, data) select @i, ' )' select @i = @i + 1 insert @result (i, data) select @i, ' values' select @i = @i + 1 insert @result (i, data) select @i, ' (' select @i = @i + 1 insert @result (i, j, data) select @i, seq, ' ' + case when seq = 1 then ' ' else ', ' end + 'b.' + colname from @cols where type 3 select @i = @i + 1 insert @result (i, data) select @i, ' );' select data from @result order by i,j,k,data

  Read the article

• SQL SERVER – A Puzzle Part 4 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value

  - by pinaldave

  It seems like every weekend I get a new puzzle in my mind. Before continuing I suggest you read my previous posts here where I have shared earlier puzzles. A Puzzle – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value  A Puzzle Part 2 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value A Puzzle Part 3 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value After reading above three posts, I am very confident that you all will be ready for the next set of puzzles now. First execute the script which I have written here. Now guess what will be the next value as requested in the query. USE TempDB GO -- Create sequence CREATE SEQUENCE dbo.SequenceID AS DECIMAL(3,0) START WITH 1 INCREMENT BY -1 MINVALUE 1 MAXVALUE 3 CYCLE NO CACHE; GO SELECT next value FOR dbo.SequenceID; -- Guess the number SELECT next value FOR dbo.SequenceID; -- Clean up DROP SEQUENCE dbo.SequenceID; GO Please note that Starting value is 1, Increment value is the negative value of -1 and Minimum value is 3. Now let us first assume how this will work out. In our example of the sequence starting value is equal to 1 and decrement value is -1, this means the value should decrement from 1 to 0. However, the minimum value is 1. This means the value cannot further decrement at all. What will happen here? The natural assumption is that it should throw an error. How many of you are assuming about query will throw an ERROR? Well, you are WRONG! Do not blame yourself, it is my fault as I have told you only half of the story. Now if you have voted for error, let us continue running above code in SQL Server Management Studio. The above script will give the following output: Isn’t it interesting that instead of error out it is giving us result value 3. To understand the answer about the same, carefully observe the original syntax of creating SEQUENCE – there is a keyword CYCLE. This keyword cycles the values between the minimum and maximum value and when one of the range is exhausted it cycles the values from the other end of the cycle. As we have negative incremental value when query reaches to the minimum value or lower end it will cycle it from the maximum value. Here the maximum value is 3 so the next logical value is 3. If your business requirement is such that if sequence reaches the maximum or minimum value, it should throw an error, you should not use the keyword cycle, and it will behave as discussed. I hope, you are enjoying the puzzles as much as I am enjoying it. If you have any interesting puzzle to share, please do share with me and I will share this on blog with due credit to you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• SQL SERVER – Puzzle #1 – Querying Pattern Ranges and Wild Cards

  - by Pinal Dave

  Note: Read at the end of the blog post how you can get five Joes 2 Pros Book #1 and a surprise gift. I have been blogging for almost 7 years and every other day I receive questions about Querying Pattern Ranges. The most common way to solve the problem is to use Wild Cards. However, not everyone knows how to use wild card properly. SQL Queries 2012 Joes 2 Pros Volume 1 – The SQL Queries 2012 Hands-On Tutorial for Beginners Book On Amazon | Book On Flipkart Learn SQL Server get all the five parts combo kit Kit on Amazon | Kit on Flipkart Many people know wildcards are great for finding patterns in character data. There are also some special sequences with wildcards that can give you even more power. This series from SQL Queries 2012 Joes 2 Pros® Volume 1 will show you some of these cool tricks. All supporting files are available with a free download from the www.Joes2Pros.com web site. This example is from the SQL 2012 series Volume 1 in the file SQLQueries2012Vol1Chapter2.2Setup.sql. If you need help setting up then look in the “Free Videos” section on Joes2Pros under “Getting Started” called “How to install your labs” Querying Pattern Ranges The % wildcard character represents any number of characters of any length. Let’s find all first names that end in the letter ‘A’. By using the percentage ‘%’ sign with the letter ‘A’, we achieve this goal using the code sample below: SELECT * FROM Employee WHERE FirstName LIKE '%A' To find all FirstName values beginning with the letters ‘A’ or ‘B’ we can use two predicates in our WHERE clause, by separating them with the OR statement. Finding names beginning with an ‘A’ or ‘B’ is easy and this works fine until we want a larger range of letters as in the example below for ‘A’ thru ‘K’: SELECT * FROM Employee WHERE FirstName LIKE 'A%' OR FirstName LIKE 'B%' OR FirstName LIKE 'C%' OR FirstName LIKE 'D%' OR FirstName LIKE 'E%' OR FirstName LIKE 'F%' OR FirstName LIKE 'G%' OR FirstName LIKE 'H%' OR FirstName LIKE 'I%' OR FirstName LIKE 'J%' OR FirstName LIKE 'K%' The previous query does find FirstName values beginning with the letters ‘A’ thru ‘K’. However, when a query requires a large range of letters, the LIKE operator has an even better option. Since the first letter of the FirstName field can be ‘A’, ‘B’, ‘C’, ‘D’, ‘E’, ‘F’, ‘G’, ‘H’, ‘I’, ‘J’ or ‘K’, simply list all these choices inside a set of square brackets followed by the ‘%’ wildcard, as in the example below: SELECT * FROM Employee WHERE FirstName LIKE '[ABCDEFGHIJK]%' A more elegant example of this technique recognizes that all these letters are in a continuous range, so we really only need to list the first and last letter of the range inside the square brackets, followed by the ‘%’ wildcard allowing for any number of characters after the first letter in the range. Note: A predicate that uses a range will not work with the ‘=’ operator (equals sign). It will neither raise an error, nor produce a result set. --Bad query (will not error or return any records) SELECT * FROM Employee WHERE FirstName = '[A-K]%' Question: You want to find all first names that start with the letters A-M in your Customer table and end with the letter Z. Which SQL code would you use? a. SELECT * FROM Customer WHERE FirstName LIKE 'm%z' b. SELECT * FROM Customer WHERE FirstName LIKE 'a-m%z' c. SELECT * FROM Customer WHERE FirstName LIKE 'a-m%z' d. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]%z' e. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]z%' f. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]%z' g. SELECT * FROM Customer WHERE FirstName LIKE '[a-m]z%' Contest Leave a valid answer before June 18, 2013 in the comment section. 5 winners will be selected from all the valid answers and will receive Joes 2 Pros Book #1. 1 Lucky person will get a surprise gift from Joes 2 Pros. The contest is open for all the countries where Amazon ships the book (USA, UK, Canada, India and many others). Special Note: Read all the options before you provide valid answer as there is a small trick hidden in answers. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to write simple code using TDD [migrated]

  - by adeel41

  Me and my colleagues do a small TDD-Kata practice everyday for 30 minutes. For reference this is the link for the excercise http://osherove.com/tdd-kata-1/ The objective is to write better code using TDD. This is my code which I've written public class Calculator { public int Add( string numbers ) { const string commaSeparator = ","; int result = 0; if ( !String.IsNullOrEmpty( numbers ) ) result = numbers.Contains( commaSeparator ) ? AddMultipleNumbers( GetNumbers( commaSeparator, numbers ) ) : ConvertToNumber( numbers ); return result; } private int AddMultipleNumbers( IEnumerable getNumbers ) { return getNumbers.Sum(); } private IEnumerable GetNumbers( string separator, string numbers ) { var allNumbers = numbers .Replace( "\n", separator ) .Split( new string[] { separator }, StringSplitOptions.RemoveEmptyEntries ); return allNumbers.Select( ConvertToNumber ); } private int ConvertToNumber( string number ) { return Convert.ToInt32( number ); } } and the tests for this class are [TestFixture] public class CalculatorTests { private int ArrangeAct( string numbers ) { var calculator = new Calculator(); return calculator.Add( numbers ); } [Test] public void Add_WhenEmptyString_Returns0() { Assert.AreEqual( 0, ArrangeAct( String.Empty ) ); } [Test] [Sequential] public void Add_When1Number_ReturnNumber( [Values( "1", "56" )] string number, [Values( 1, 56 )] int expected ) { Assert.AreEqual( expected, ArrangeAct( number ) ); } [Test] public void Add_When2Numbers_AddThem() { Assert.AreEqual( 3, ArrangeAct( "1,2" ) ); } [Test] public void Add_WhenMoreThan2Numbers_AddThemAll() { Assert.AreEqual( 6, ArrangeAct( "1,2,3" ) ); } [Test] public void Add_SeparatorIsNewLine_AddThem() { Assert.AreEqual( 6, ArrangeAct( @"1 2,3" ) ); } } Now I'll paste code which they have written public class StringCalculator { private const char Separator = ','; public int Add( string numbers ) { const int defaultValue = 0; if ( ShouldReturnDefaultValue( numbers ) ) return defaultValue; return ConvertNumbers( numbers ); } private int ConvertNumbers( string numbers ) { var numberParts = GetNumberParts( numbers ); return numberParts.Select( ConvertSingleNumber ).Sum(); } private string[] GetNumberParts( string numbers ) { return numbers.Split( Separator ); } private int ConvertSingleNumber( string numbers ) { return Convert.ToInt32( numbers ); } private bool ShouldReturnDefaultValue( string numbers ) { return String.IsNullOrEmpty( numbers ); } } and the tests [TestFixture] public class StringCalculatorTests { [Test] public void Add_EmptyString_Returns0() { ArrangeActAndAssert( String.Empty, 0 ); } [Test] [TestCase( "1", 1 )] [TestCase( "2", 2 )] public void Add_WithOneNumber_ReturnsThatNumber( string numberText, int expected ) { ArrangeActAndAssert( numberText, expected ); } [Test] [TestCase( "1,2", 3 )] [TestCase( "3,4", 7 )] public void Add_WithTwoNumbers_ReturnsSum( string numbers, int expected ) { ArrangeActAndAssert( numbers, expected ); } [Test] public void Add_WithThreeNumbers_ReturnsSum() { ArrangeActAndAssert( "1,2,3", 6 ); } private void ArrangeActAndAssert( string numbers, int expected ) { var calculator = new StringCalculator(); var result = calculator.Add( numbers ); Assert.AreEqual( expected, result ); } } Now the question is which one is better? My point here is that we do not need so many small methods initially because StringCalculator has no sub classes and secondly the code itself is so simple that we don't need to break it up too much that it gets confusing after having so many small methods. Their point is that code should read like english and also its better if they can break it up earlier than doing refactoring later and third when they will do refactoring it would be much easier to move these methods quite easily into separate classes. My point of view against is that we never made a decision that code is difficult to understand so why we are breaking it up so early. So I need a third person's opinion to understand which option is much better.

  Read the article

• SQL Constraints &ndash; CHECK and NOCHECK

  - by David Turner

  One performance issue i faced at a recent project was with the way that our constraints were being managed, we were using Subsonic as our ORM, and it has a useful tool for generating your ORM code called SubStage – once configured, you can regenerate your DAL code easily based on your database schema, and it can even be integrated into your build as a pre-build event if you want to do this.  SubStage also offers the useful feature of being able to generate DDL scripts for your entire database, and can script your data for you too. The problem came when we decided to use the generate scripts feature to migrate the database onto a test database instance – it turns out that the DDL scripts that it generates include the WITH NOCHECK option, so when we executed them on the test instance, and performed some testing, we found that performance wasn’t as expected. A constraint can be disabled, enabled but not trusted, or enabled and trusted.  When it is disabled, data can be inserted that violates the constraint because it is not being enforced, this is useful for bulk load scenarios where performance is important.  So what does it mean to say that a constraint is trusted or not trusted?  Well this refers to the SQL Server Query Optimizer, and whether it trusts that the constraint is valid.  If it trusts the constraint then it doesn’t check it is valid when executing a query, so the query can be executed much faster. Here is an example base in this article on TechNet, here we create two tables with a Foreign Key constraint between them, and add a single row to each.  We then query the tables: 1 DROP TABLE t2 2 DROP TABLE t1 3 GO 4 5 CREATE TABLE t1(col1 int NOT NULL PRIMARY KEY) 6 CREATE TABLE t2(col1 int NOT NULL) 7 8 ALTER TABLE t2 WITH CHECK ADD CONSTRAINT fk_t2_t1 FOREIGN KEY(col1) 9 REFERENCES t1(col1) 10 11 INSERT INTO t1 VALUES(1) 12 INSERT INTO t2 VALUES(1) 13 GO14 15 SELECT COUNT(*) FROM t2 16 WHERE EXISTS17 (SELECT *18 FROM t1 19 WHERE t1.col1 = t2.col1) This all works fine, and in this scenario the constraint is enabled and trusted.  We can verify this by executing the following SQL to query the ‘is_disabled’ and ‘is_not_trusted’ properties: 1 select name, is_disabled, is_not_trusted from sys.foreign_keys This gives the following result: We can disable the constraint using this SQL: 1 alter table t2 NOCHECK CONSTRAINT fk_t2_t1 And when we query the constraints again, we see that the constraint is disabled and not trusted: So the constraint won’t be enforced and we can insert data into the table t2 that doesn’t match the data in t1, but we don’t want to do this, so we can enable the constraint again using this SQL: 1 alter table t2 CHECK CONSTRAINT fk_t2_t1 But when we query the constraints again, we see that the constraint is enabled, but it is still not trusted: This means that the optimizer will check the constraint each time a query is executed over it, which will impact the performance of the query, and this is definitely not what we want, so we need to make the constraint trusted by the optimizer again.  First we should check that our constraints haven’t been violated, which we can do by running DBCC: 1 DBCC CHECKCONSTRAINTS (t2) Hopefully you see the following message indicating that DBCC completed without finding any violations of your constraint: Having verified that the constraint was not violated while it was disabled, we can simply execute the following SQL:   1 alter table t2 WITH CHECK CHECK CONSTRAINT fk_t2_t1 At first glance this looks like it must be a typo to have the keyword CHECK repeated twice in succession, but it is the correct syntax and when we query the constraints properties, we find that it is now trusted again: To fix our specific problem, we created a script that checked all constraints on our tables, using the following syntax: 1 ALTER TABLE t2 WITH CHECK CHECK CONSTRAINT ALL

  Read the article

• How do I use setFilmSize in panda3d to achieve the correct view?

  - by lhk

  I'm working with Panda3d and recently switched my game to isometric rendering. I moved the virtual camera accordingly and set an orthographic lens. Then I implemented the classes "Map" and "Canvas". A canvas is a dynamically generated mesh: a flat quad. I'm using it to render the ingame graphics. Since the game itself is still set in a 3d coordinate system I'm planning to rely on these canvases to draw sprites. I could have named this class "Tile" but as I'd like to use it for non-tile sketches (enemies, environment) as well I thought canvas would describe it's function better. Map does exactly what it's name suggests. Its constructor receives the number of rows and columns and then creates a standard isometric map. It uses the canvas class for tiles. I'm planning to write a map importer that reads a file to create maps on the fly. Here's the canvas implementation: class Canvas: def __init__(self, texture, vertical=False, width=1,height=1): # create the mesh format=GeomVertexFormat.getV3t2() format = GeomVertexFormat.registerFormat(format) vdata=GeomVertexData("node-vertices", format, Geom.UHStatic) vertex = GeomVertexWriter(vdata, 'vertex') texcoord = GeomVertexWriter(vdata, 'texcoord') # add the vertices for a flat quad vertex.addData3f(1, 0, 0) texcoord.addData2f(1, 0) vertex.addData3f(1, 1, 0) texcoord.addData2f(1, 1) vertex.addData3f(0, 1, 0) texcoord.addData2f(0, 1) vertex.addData3f(0, 0, 0) texcoord.addData2f(0, 0) prim = GeomTriangles(Geom.UHStatic) prim.addVertices(0, 1, 2) prim.addVertices(2, 3, 0) self.geom = Geom(vdata) self.geom.addPrimitive(prim) self.node = GeomNode('node') self.node.addGeom(self.geom) # this is the handle for the canvas self.nodePath=NodePath(self.node) self.nodePath.setSx(width) self.nodePath.setSy(height) if vertical: self.nodePath.setP(90) # the most important part: "Drawing" the image self.texture=loader.loadTexture(""+texture+".png") self.nodePath.setTexture(self.texture) Now the code for the Map class class Map: def __init__(self,rows,columns,size): self.grid=[] for i in range(rows): self.grid.append([]) for j in range(columns): # create a canvas for the tile. For testing the texture is preset tile=Canvas(texture="../assets/textures/flat_concrete",width=size,height=size) x=(i-1)*size y=(j-1)*size # set the tile up for rendering tile.nodePath.reparentTo(render) tile.nodePath.setX(x) tile.nodePath.setY(y) # and store it for later access self.grid[i].append(tile) And finally the usage def loadMap(self): self.map=Map(10, 10, 1) this function is called within the constructor of the World class. The instantiation of world is the entry point to the execution. The code is pretty straightforward and runs good. Sadly the output is not as expected: Please note: The problem is not the white rectangle, it's my player object. The problem is that although the map should have equal width and height it's stretched weirdly. With orthographic rendering I expected the map to be a perfect square. What did I do wrong ? UPDATE: I've changed the viewport. This is how I set up the orthographic camera: lens = OrthographicLens() lens.setFilmSize(40, 20) base.cam.node().setLens(lens) You can change the "aspect" by modifying the parameters of setFilmSize. I don't know exactly how they are related to window size and screen resolution but after testing a little the values above seem to work for me. Now everything is rendered correctly as long as I don't resize the window. Every change of the window's size as well as switching to fullscreen destroys the correct rendering. I know that implementing a listener for resize events is not in the scope of this question. However I wonder why I need to make the Film's height two times bigger than its width. My window is quadratic ! Can you tell me how to find out correct setting for the FilmSize ? UPDATE 2: I can imagine that it's hard to envision the behaviour of the game. At first glance the obvious solution is to pass the window's width and height in pixels to setFilmSize. There are two problems with that approach. The parameters for setFilmSize are ingame units. You'll get a way to big view if you pass the pixel size For some strange reason the image is distorted if you pass equal values for width and height. Here's the output for setFilmSize(800,800) You'll have to stress your eyes but you'll see what I mean

  Read the article

• AccelerometerInput XNA GameComponent

  - by Michael B. McLaughlin

  Bad accelerometer controls kill otherwise good games. I decided to try to do something about it. So I create an XNA GameComponent called AccelerometerInput. It’s still a beta project but you are welcome to try it, use it, modify it, etc. I’m releasing under the terms of the Microsoft Public License. Important info: First, it only supports tilt-style controls currently. I have not implemented motion-style controls yet (and make no promises as to when I might find time to do so). Second, I commented it heavily so that you can (hopefully) understand what it is doing. Please read the comments and examine the sample game for a usage overview. There are configurable parameters which I encourage you to make use of (both by modifying the default values where your testing shows it to be appropriate and also by implementing a calibration mechanism in your game that lets the user adjust those configurable values based on his or her own circumstances). Third, even with this code, accelerometer controls are still a fairly advanced topic area; you will likely find nothing but disappointment if you simply plunk this into some project without testing it on a device (or preferably on several devices). Fourth, if you do try this code and find that something doesn’t work as expected on your phone, please let me know as I want to improve it and can only do so with your help. Let me know what phone model it is, what you tried doing, what you expected, and what result you had instead. I may or may not be able to incorporate it into the code, but I can let others know at the very least so that they can make appropriate modifications to their games (I’m hopeful that all phones are reasonably similar in their workings and require, at most, a slight calibration change, but I simply don’t know). Fifth, although I’ll do my best to answer any questions you may have about it, I’m very busy with a number of things currently so it might take a little while. Please look through the code and examine the comments and sample game first before asking any questions. It’s likely that the answer is in there. If not, or if you just aren’t really sure, ask away. Sixth, there are differences between a portrait-mode game and a landscape mode game (specifically in the appropriate default tilt adjustment for toward the user/away from the user calculations). This is documented and the default is set for landscape. If you use this for a portrait game, make the appropriate change (look for the TODO: comment in AccelerometerInput.cs). Seventh, no provision whatsoever is made for disabling screen locking. It is up to you to implement that and to take appropriate measures to detect when the user has been idle for too long and timeout the game. That code is very game-specific. If you have questions about such matters, consult the relevant MSDN documentation and, if you still have questions, visit the App Hub forums and ask there. I answer questions there a lot and so I may even stumble across your question and answer it. But that’s a much better forum than the comments section here for questions of that sort so I would appreciate it if you asked idle detection-related questions there (or on some other suitable site that you may be more familiar and comfortable with). Eighth, this is an XNA GameComponent intended for XNA-based games on WP7. A sufficiently knowledgeable Silverlight developer should have no problem adapting it for use in a Silverlight game or app. I may create a Silverlight version at some point myself. Right now I do not have the time, unfortunately. Ok. Without further ado: http://www.bobtacoindustries.com/developers/utils/AccelerometerInput.zip Have a great St. Patrick’s Day!

  Read the article

• Java - Tile engine changing number in array not changing texture

  - by Corey

  I draw my map from a txt file. Would I have to write to the text file to notice the changes I made? Right now it changes the number in the array but the tile texture doesn't change. Do I have to do more than just change the number in the array? public class Tiles { public Image[] tiles = new Image[5]; public int[][] map = new int[64][64]; private Image grass, dirt, fence, mound; private SpriteSheet tileSheet; public int tileWidth = 32; public int tileHeight = 32; Player player = new Player(); public void init() throws IOException, SlickException { tileSheet = new SpriteSheet("assets/tiles.png", tileWidth, tileHeight); grass = tileSheet.getSprite(0, 0); dirt = tileSheet.getSprite(7, 7); fence = tileSheet.getSprite(2, 0); mound = tileSheet.getSprite(2, 6); tiles[0] = grass; tiles[1] = dirt; tiles[2] = fence; tiles[3] = mound; int x=0, y=0; BufferedReader in = new BufferedReader(new FileReader("assets/map.dat")); String line; while ((line = in.readLine()) != null) { String[] values = line.split(","); for (String str : values) { int str_int = Integer.parseInt(str); map[x][y]=str_int; //System.out.print(map[x][y] + " "); y=y+1; } //System.out.println(""); x=x+1; y = 0; } in.close(); } public void update(GameContainer gc) { } public void render(GameContainer gc) { for(int x = 0; x < map.length; x++) { for(int y = 0; y < map.length; y ++) { int textureIndex = map[y][x]; Image texture = tiles[textureIndex]; texture.draw(x*tileWidth,y*tileHeight); } } } Mouse picking public void checkDistance(GameContainer gc) { Input input = gc.getInput(); float mouseX = input.getMouseX(); float mouseY = input.getMouseY(); double mousetileX = Math.floor((double)mouseX/tiles.tileWidth); double mousetileY = Math.floor((double)mouseY/tiles.tileHeight); double playertileX = Math.floor(playerX/tiles.tileWidth); double playertileY = Math.floor(playerY/tiles.tileHeight); double lengthX = Math.abs((float)playertileX - mousetileX); double lengthY = Math.abs((float)playertileY - mousetileY); double distance = Math.sqrt((lengthX*lengthX)+(lengthY*lengthY)); if(input.isMousePressed(Input.MOUSE_LEFT_BUTTON) && distance < 4) { System.out.println("Clicked"); if(tiles.map[(int)mousetileX][(int)mousetileY] == 1) { tiles.map[(int)mousetileX][(int)mousetileY] = 0; } } System.out.println(tiles.map[(int)mousetileX][(int)mousetileY]); }

  Read the article

• Using T4 to generate Configuration classes

  - by Justin Hoffman

  I wanted to try to use T4 to read a web.config and generate all of the appSettings and connectionStrings as properties of a class.  I elected in this template only to output appSettings and connectionStrings but you can see it would be easily adapted for app specific settings, bindings etc.  This allows for quick access to config values as well as removing the potential for typo's when accessing values from the ConfigurationManager. One caveat: a developer would need to remember to run the .tt file after adding an entry to the web.config.  However, one would quickly notice when trying to access the property from the generated class (it wouldn't be there).  Additionally, there are other options as noted here. The first step was to create the .tt file.  Note that this is a basic example, it could be extended even further I'm sure.  In this example I just manually input the path to the web.config file. <#@ template debug="false" hostspecific="true" language="C#" #><#@ output extension=".cs" #><#@ assembly Name="System.Configuration" #><#@ assembly name="System.Xml" #><#@ assembly name="System.Xml.Linq" #><#@ assembly name="System.Net" #><#@ assembly name="System" #><#@ import namespace="System.Configuration" #><#@ import namespace="System.Xml" #><#@ import namespace="System.Net" #><#@ import namespace="Microsoft.VisualStudio.TextTemplating" #><#@ import namespace="System.Xml.Linq" #>using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { <# var xDocument = XDocument.Load(@"G:\MySolution\MyProject\Web.config"); var results = xDocument.Descendants("appSettings"); const string key = "key"; const string name = "name"; foreach (var xElement in results.Descendants()) {#> public string <#= xElement.Attribute(key).Value#>{get {return ConfigurationManager.AppSettings[<#= string.Format("{0}{1}{2}","\"" , xElement.Attribute(key).Value, "\"")#>];}} <#}#> <# var connectionStrings = xDocument.Descendants("connectionStrings"); foreach(var connString in connectionStrings.Descendants()) {#> public string <#= connString.Attribute(name).Value#>{get {return ConfigurationManager.ConnectionStrings[<#= string.Format("{0}{1}{2}","\"" , connString.Attribute(name).Value, "\"")#>].ConnectionString;}} <#} #> }} The resulting .cs file: using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { public string ClientValidationEnabled{get {return ConfigurationManager.AppSettings["ClientValidationEnabled"];}} public string UnobtrusiveJavaScriptEnabled{get {return ConfigurationManager.AppSettings["UnobtrusiveJavaScriptEnabled"];}} public string ServiceUri{get {return ConfigurationManager.AppSettings["ServiceUri"];}} public string TestConnection{get {return ConfigurationManager.ConnectionStrings["TestConnection"].ConnectionString;}} public string SecondTestConnection{get {return ConfigurationManager.ConnectionStrings["SecondTestConnection"].ConnectionString;}} }} Next, I extended the partial class for easy access to the Configuration. However, you could just use the generated class file itself. using System;using System.Linq;using System.Xml.Linq;namespace MyProject.Web{ public partial class Configurator { private static readonly Configurator Instance = new Configurator(); public static Configurator For { get { return Instance; } } }} Finally, in my example, I used the Configurator class like so: [TestMethod] public void Test_Web_Config() { var result = Configurator.For.ServiceUri; Assert.AreEqual(result, "http://localhost:30237/Service1/"); }

  Read the article

• SQL Server Date Comparison Functions

  - by HighAltitudeCoder

  A few months ago, I found myself working with a repetitive cursor that looped until the data had been manipulated enough times that it was finally correct.  The cursor was heavily dependent upon dates, every time requiring the earlier of two (or several) dates in one stored procedure, while requiring the later of two dates in another stored procedure. In short what I needed was a function that would allow me to perform the following evaluation: WHERE MAX(Date1, Date2) < @SomeDate The problem is, the MAX() function in SQL Server does not perform this functionality.  So, I set out to put these functions together.  They are titled: EarlierOf() and LaterOf(). /**********************************************************                               EarlierOf.sql   **********************************************************/ /**********************************************************   Return the later of two DATETIME variables.   Parameter 1: DATETIME1 Parameter 2: DATETIME2   Works for a variety of DATETIME or NULL values. Even though comparisons with NULL are actually indeterminate, we know conceptually that NULL is not earlier or later than any other date provided.   SYNTAX: SELECT dbo.EarlierOf('1/1/2000','12/1/2009') SELECT dbo.EarlierOf('2009-12-01 00:00:00.000','2009-12-01 00:00:00.521') SELECT dbo.EarlierOf('11/15/2000',NULL) SELECT dbo.EarlierOf(NULL,'1/15/2004') SELECT dbo.EarlierOf(NULL,NULL)   **********************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE name = 'EarlierOf'       AND xtype = 'FN'       ) BEGIN             DROP FUNCTION EarlierOf END GO   CREATE FUNCTION EarlierOf (       @Date1                              DATETIME,       @Date2                              DATETIME )   RETURNS DATETIME   AS BEGIN       DECLARE @ReturnDate     DATETIME         IF (@Date1 IS NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = NULL             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NULL AND @Date2 IS NOT NULL)       BEGIN             SET @ReturnDate = @Date2             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NOT NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = @Date1             GOTO EndOfFunction       END         ELSE       BEGIN             SET @ReturnDate = @Date1             IF @Date2 < @Date1                   SET @ReturnDate = @Date2             GOTO EndOfFunction       END         EndOfFunction:       RETURN @ReturnDate   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON EarlierOf TO UserRole1 --GRANT SELECT ON EarlierOf TO UserRole2 --GO                                                                                             The inverse of this function is only slightly different. /**********************************************************                               LaterOf.sql   **********************************************************/ /**********************************************************   Return the later of two DATETIME variables.   Parameter 1: DATETIME1 Parameter 2: DATETIME2   Works for a variety of DATETIME or NULL values. Even though comparisons with NULL are actually indeterminate, we know conceptually that NULL is not earlier or later than any other date provided.   SYNTAX: SELECT dbo.LaterOf('1/1/2000','12/1/2009') SELECT dbo.LaterOf('2009-12-01 00:00:00.000','2009-12-01 00:00:00.521') SELECT dbo.LaterOf('11/15/2000',NULL) SELECT dbo.LaterOf(NULL,'1/15/2004') SELECT dbo.LaterOf(NULL,NULL)   **********************************************************/ USE AdventureWorks GO   IF EXISTS       (SELECT *       FROM sysobjects       WHERE name = 'LaterOf'       AND xtype = 'FN'       ) BEGIN             DROP FUNCTION LaterOf END GO   CREATE FUNCTION LaterOf (       @Date1                              DATETIME,       @Date2                              DATETIME )   RETURNS DATETIME   AS BEGIN       DECLARE @ReturnDate     DATETIME         IF (@Date1 IS NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = NULL             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NULL AND @Date2 IS NOT NULL)       BEGIN             SET @ReturnDate = @Date2             GOTO EndOfFunction       END         ELSE IF (@Date1 IS NOT NULL AND @Date2 IS NULL)       BEGIN             SET @ReturnDate = @Date1             GOTO EndOfFunction       END         ELSE       BEGIN             SET @ReturnDate = @Date1             IF @Date2 > @Date1                   SET @ReturnDate = @Date2             GOTO EndOfFunction       END         EndOfFunction:       RETURN @ReturnDate   END -- End Function GO   ---- Set Permissions --GRANT SELECT ON LaterOf TO UserRole1 --GRANT SELECT ON LaterOf TO UserRole2 --GO                                                                                             The interesting thing about this function is its simplicity and the built-in NULL handling functionality.  Its interesting, because it seems like something should already exist in SQL Server that does this.  From a different vantage point, if you create this functionality and it is easy to use (ideally, intuitively self-explanatory), you have made a successful contribution. Interesting is good.  Self-explanatory, or intuitive is FAR better.  Happy coding! Graeme

  Read the article

• EPM troubleshooting Utilities

  - by THE

  (in via Maurice) "Are you keeping up-to-date with the latest troubleshooting utilities introduced from EPM 11.1.2.2? These are typically not described in product documentation, so you might miss references to them. The following five utilities may be run from the command line.(1) Deployment Report was introduced with EPM 11.1.2.2 (11 April 2012). It details logical web addresses, web servers, application ports, database connections, user directories, database repositories configured for the EPM system, data directories used by EPM system products, instance directories, FMW homes, deployment distory, et cetera. It also helps to keep you honest about whether you made changes to the system and at what times! Download Shared Services patch 13530721 to get the backported functionality in EPM 11.1.2.1. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/epmsys_registry.sh report deployment (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\epmsys_registry.bat report deployment (on Microsoft Windows). The output is saved under \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\deployment_report.html (2) Log Analysis has received more "press". It was released with EPM 11.1.2.3 and helps the user to slice and dice EPM logs. It has many parameters which are documented when run without parameters, when run with the -h parameter, or in the 'Readme' file. It has also been released as a standalone utility for EPM 11.1.2.3 and earlier versions. (Sign in to  My Oracle Support, click the 'Patches & Updates' tab, enter the patch number 17425397, and click the Search button. Download the appropriate platform-specific zip file, unzip, and read the 'Readme' file. Note that you must provide a proper value to a JAVA_HOME environment variable [pointer to the mother directory of the Java /bin subdirectory] in the loganalysis.bat | .sh file and use the -d parameter when running standalone.) Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/loganalysis.sh -h (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\loganalysis.bat -h (on Microsoft Windows). The output is saved under the \Oracle\Middleware\user_projects\epmsystem1\diagnostics\reports\ subdirectory. (3) The Registry Cleanup command may be used (without fear!) to clean up various corruptions which can  affect the Hyperion (database-based) Repository. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/registry-cleanup.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\registry-cleanup.bat (on Microsoft Windows). The actions are described on the command line. (4) The Remove Instance Command is only used if there are two or more instances configured on one computer and one of those should be deleted. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/remove-instance.sh (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\remove-instance.bat (on Microsoft Windows). (5) The Reset Configuration Tool was introduced with EPM 11.1.2.2. It nullifies Shared Services Hyperion Registry settings so that a service may be reconfigured. You may locate the values to substitute for <product> or <task> by scanning registry.html (generated by running epmsys_registry.bat | .sh). Find productNAME in INSTANCE_TASKS_CONFIGURATION and SYSTEM_TASKS_CONFIGURATION nodes and identify tasks by property pairs that have values of 'Configurated' or 'Pending'. Run it from /Oracle/Middleware/user_projects/epmsystem1/bin/resetConfigTask.sh -product <product> -task <task> (on Unix/Linux)\Oracle\Middleware\user_projects\epmsystem1\bin\resetConfigTask.bat -product <product> -task <task> (on Microsoft Windows). "Thanks to Maurice for this collection of utilities.

  Read the article

• Collision detection via adjacent tiles - sprite too big

  - by BlackMamba

  I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

  Read the article

• Handling Configuration Changes in Windows Azure Applications

  - by Your DisplayName here!

  While finalizing StarterSTS 1.5, I had a closer look at lifetime and configuration management in Windows Azure. (this is no new information – just some bits and pieces compiled at one single place – plus a bit of reality check) When dealing with lifetime management (and especially configuration changes), there are two mechanisms in Windows Azure – a RoleEntryPoint derived class and a couple of events on the RoleEnvironment class. You can find good documentation about RoleEntryPoint here. The RoleEnvironment class features two events that deal with configuration changes – Changing and Changed. Whenever a configuration change gets pushed out by the fabric controller (either changes in the settings section or the instance count of a role) the Changing event gets fired. The event handler receives an instance of the RoleEnvironmentChangingEventArgs type. This contains a collection of type RoleEnvironmentChange. This in turn is a base class for two other classes that detail the two types of possible configuration changes I mentioned above: RoleEnvironmentConfigurationSettingsChange (configuration settings) and RoleEnvironmentTopologyChange (instance count). The two respective classes contain information about which configuration setting and which role has been changed. Furthermore the Changing event can trigger a role recycle (aka reboot) by setting EventArgs.Cancel to true. So your typical job in the Changing event handler is to figure if your application can handle these configuration changes at runtime, or if you rather want a clean restart. Prior to the SDK 1.3 VS Templates – the following code was generated to reboot if any configuration settings have changed: private void RoleEnvironmentChanging(object sender, RoleEnvironmentChangingEventArgs e) {     // If a configuration setting is changing     if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))     {         // Set e.Cancel to true to restart this role instance         e.Cancel = true;     } } This is a little drastic as a default since most applications will work just fine with changed configuration – maybe that’s the reason this code has gone away in the 1.3 SDK templates (more). The Changed event gets fired after the configuration changes have been applied. Again the changes will get passed in just like in the Changing event. But from this point on RoleEnvironment.GetConfigurationSettingValue() will return the new values. You can still decide to recycle if some change was so drastic that you need a restart. You can use RoleEnvironment.RequestRecycle() for that (more). As a rule of thumb: When you always use GetConfigurationSettingValue to read from configuration (and there is no bigger state involved) – you typically don’t need to recycle. In the case of StarterSTS, I had to abstract away the physical configuration system and read the actual configuration (either from web.config or the Azure service configuration) at startup. I then cache the configuration settings in memory. This means I indeed need to take action when configuration changes – so in my case I simply clear the cache, and the new config values get read on the next access to my internal configuration object. No downtime – nice! Gotcha A very natural place to hook up the RoleEnvironment lifetime events is the RoleEntryPoint derived class. But with the move to the full IIS model in 1.3 – the RoleEntryPoint methods get executed in a different AppDomain (even in a different process) – see here.. You might no be able to call into your application code to e.g. clear a cache. Keep that in mind! In this case you need to handle these events from e.g. global.asax.

  Read the article

• Using Appendbuffers in unity for terrain generation

  - by Wardy

  Like many others I figured I would try and make the most of the monster processing power of the GPU but I'm having trouble getting the basics in place. CPU code: using UnityEngine; using System.Collections; public class Test : MonoBehaviour { public ComputeShader Generator; public MeshTopology Topology; void OnEnable() { var computedMeshPoints = ComputeMesh(); CreateMeshFrom(computedMeshPoints); } private Vector3[] ComputeMesh() { var size = (32*32) * 4; // 4 points added for each x,z pos var buffer = new ComputeBuffer(size, 12, ComputeBufferType.Append); Generator.SetBuffer(0, "vertexBuffer", buffer); Generator.Dispatch(0, 1, 1, 1); var results = new Vector3[size]; buffer.GetData(results); buffer.Dispose(); return results; } private void CreateMeshFrom(Vector3[] generatedPoints) { var filter = GetComponent<MeshFilter>(); var renderer = GetComponent<MeshRenderer>(); if (generatedPoints.Length > 0) { var mesh = new Mesh { vertices = generatedPoints }; var colors = new Color[generatedPoints.Length]; var indices = new int[generatedPoints.Length]; //TODO: build this different based on topology of the mesh being generated for (int i = 0; i < indices.Length; i++) { indices[i] = i; colors[i] = Color.blue; } mesh.SetIndices(indices, Topology, 0); mesh.colors = colors; mesh.RecalculateNormals(); mesh.Optimize(); mesh.RecalculateBounds(); filter.sharedMesh = mesh; } else { filter.sharedMesh = null; } } } GPU code: #pragma kernel Generate AppendStructuredBuffer<float3> vertexBuffer : register(u0); void genVertsAt(uint2 xzPos) { //TODO: put some height generation code here. // could even run marching cubes / dual contouring code. float3 corner1 = float3( xzPos[0], 0, xzPos[1] ); float3 corner2 = float3( xzPos[0] + 1, 0, xzPos[1] ); float3 corner3 = float3( xzPos[0], 0, xzPos[1] + 1); float3 corner4 = float3( xzPos[0] + 1, 0, xzPos[1] + 1 ); vertexBuffer.Append(corner1); vertexBuffer.Append(corner2); vertexBuffer.Append(corner3); vertexBuffer.Append(corner4); } [numthreads(32, 1, 32)] void Generate (uint3 threadId : SV_GroupThreadID, uint3 groupId : SV_GroupID) { uint2 currentXZ = unint2( groupId.x * 32 + threadId.x, groupId.z * 32 + threadId.z); genVertsAt(currentXZ); } Can anyone explain why when I call "buffer.GetData(results);" on the CPU after the compute dispatch call my buffer is full of Vector3(0,0,0), I'm not expecting any y values yet but I would expect a bunch of thread indexes in the x,z values for the Vector3 array. I'm not getting any errors in any of this code which suggests it's correct syntax-wise but maybe the issue is a logical bug. Also: Yes, I know I'm generating 4,000 Vector3's and then basically round tripping them. However, the purpose of this code is purely to learn how round tripping works between CPU and GPU in Unity.

  Read the article

• Stale statistics on a newly created temporary table in a stored procedure can lead to poor performance

  - by sqlworkshops

  When you create a temporary table you expect a new table with no past history (statistics based on past existence), this is not true if you have less than 6 updates to the temporary table. This might lead to poor performance of queries which are sensitive to the content of temporary tables.I was optimizing SQL Server Performance at one of my customers who provides search functionality on their website. They use stored procedure with temporary table for the search. The performance of the search depended on who searched what in the past, option (recompile) by itself had no effect. Sometimes a simple search led to timeout because of non-optimal plan usage due to this behavior. This is not a plan caching issue rather temporary table statistics caching issue, which was part of the temporary object caching feature that was introduced in SQL Server 2005 and is also present in SQL Server 2008 and SQL Server 2012. In this customer case we implemented a workaround to avoid this issue (see below for example for workarounds).When temporary tables are cached, the statistics are not newly created rather cached from the past and updated based on automatic update statistics threshold. Caching temporary tables/objects is good for performance, but caching stale statistics from the past is not optimal.We can work around this issue by disabling temporary table caching by explicitly executing a DDL statement on the temporary table. One possibility is to execute an alter table statement, but this can lead to duplicate constraint name error on concurrent stored procedure execution. The other way to work around this is to create an index.I think there might be many customers in such a situation without knowing that stale statistics are being cached along with temporary table leading to poor performance.Ideal solution is to have more aggressive statistics update when the temporary table has less number of rows when temporary table caching is used. I will open a connect item to report this issue.Meanwhile you can mitigate the issue by creating an index on the temporary table. You can monitor active temporary tables using Windows Server Performance Monitor counter: SQL Server: General Statistics->Active Temp Tables. The script to understand the issue and the workaround is listed below:set nocount onset statistics time offset statistics io offdrop table tab7gocreate table tab7 (c1 int primary key clustered, c2 int, c3 char(200))gocreate index test on tab7(c2, c1, c3)gobegin trandeclare @i intset @i = 1while @i <= 50000begininsert into tab7 values (@i, 1, ‘a’)set @i = @i + 1endcommit trangoinsert into tab7 values (50001, 1, ‘a’)gocheckpointgodrop proc test_slowgocreate proc test_slow @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_slow 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'exec test_slow 2godrop proc test_with_recompilegocreate proc test_with_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_recompile 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'–low reads on 3rd execution as expected for parameter ’2'exec test_with_recompile 2godrop proc test_with_alter_table_recompilegocreate proc test_with_alter_table_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create a constraint–but this might lead to duplicate constraint name error on concurrent usagealter table #temp1 add constraint test123 unique(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_alter_table_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_alter_table_recompile 2godrop proc test_with_index_recompilegocreate proc test_with_index_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create an indexcreate index test on #temp1(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgoset statistics time onset statistics io ondbcc dropcleanbuffersgo–high reads as expected for parameter ’1'exec test_with_index_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_index_recompile 2go

  Read the article

• Musings on the launch of SQL Monitor

  - by Phil Factor

  For several years, I was responsible for the smooth running of a large number of enterprise database servers. We ran a network monitoring tool that was primitive by today’s standards but which performed the useful function of polling every system, including all the Servers in my charge. It ran a configurable script for each service that you needed to monitor that was merely required to return one of a number of integer values. These integer values represented the pain level of the service, from 10 (“hurtin’ real bad”) to 1 (“Things is great”). Not only could you program the visual appearance of each server on the network diagram according to the value of the integer, but you could even opt to run a sound file. Very soon, we had a large TFT Screen, high on the wall of the server room, with every server represented by an icon, and a speaker next to it that would give out a series of grunts, groans, snores, shrieks and funeral marches, depending on the problem. One glance at the display, and you could dive in with iSQL/QA/SSMS and check what was going on with your favourite diagnostic tools. If you saw a server icon burst into flames on the screen or droop like a jelly, you dropped your mug of coffee to do it.  It was real fun, but I remember it more for the huge difference it made to have that real-time visibility into how your servers are performing. The management soon stopped making jokes about the real reason we wanted the TFT screen. (It rendered DVDs beautifully they said; particularly flesh-tints). If you are instantly alerted when things start to go wrong, then there was a good chance you could fix it before being alerted to the problem by the users of the system.  There is a world of difference between this sort of tool, one that gives whoever is ‘on watch’ in the server room the first warning of a potential problem on one of any number of servers, and the breed of tool that attempts to provide some sort of prosthetic DBA Brain. I like to get the early warning, to get the right information to help to diagnose a problem: No auto-fix, but just the information. I prefer to leave the task of ascertaining the exact cause of a problem to my own routines, custom code, intuition and forensic instincts. A simulated aircraft cockpit doesn’t do anything for me, especially before I know where I should be flying.  Time has moved on, and that TFT screen is now, with SQL Monitor, an iPad or any other mobile or static device that can support a browser. Rather than trying to reproduce the conceptual topology of the servers, it lists them in their groups so as to give a display that scales with the increasing number of databases you monitor.  It gives the history of the major events and trends for the servers. It gives the icons and colours that you can spot out of the corner of your eye, but goes on to give you just enough information in drill-down to give you a much clearer idea of where to look with your DBA tools and routines. It doesn't swamp you with information.  Whereas a few server and database-level problems are pretty easily fixed, others depend on judgement and experience to sort out.  Although the idea of an application that automates the bulk of a DBA’s skills is attractive to many, I can’t see it happening soon. SQL Server’s complexity increases faster than the panaceas can be created. In the meantime, I believe that the best way of helping  DBAs  is to make the monitoring process as simple and effective as possible,  and provide the right sort of detail and ‘evidence’ to allow them to decide on the fix. In the end, it is still down to the skill of the DBA.

  Read the article

• I am trying to create an windows application watcher? [migrated]

  - by Broken_Code

  I recently started coding in c #(in may this year) and well I find it best to learn by working with code. this application http://www.c-sharpcorner.com/UploadFile/satisharveti/ActiveApplicationWatcher01252007024921AM/ActiveApplicationWatcher.aspx. I am trying to recreate it however mine will be saving the information into an sql database(new at this as well). I am having some coding problems though as it does not do what I expect it to do. THis is the main code I am using. private void GetTotalTimer() { DateTime now = DateTime.Now; IntPtr hwnd = APIFunc.getforegroundWindow(); Int32 pid = APIFunc.GetWindowProcessID(hwnd); Process p = Process.GetProcessById(pid); appName = p.ProcessName; const int nChars = 256; int handle = 0; StringBuilder Buff = new StringBuilder(nChars); handle = GetForegroundWindow(); appltitle = APIFunc.ActiveApplTitle().Trim().Replace("\0", ""); //if (GetWindowText(handle, Buff, nChars) > 0) //{ // string strbuff = Buff.ToString(); // StrWindow = strbuff; #region insert statement try { if (Conn.State == ConnectionState.Closed) { Conn.Open(); } if (Conn.State == ConnectionState.Open) { SqlCommand com = new SqlCommand("Select top 1 [Window Title] From TimerLogs ORDER BY [Time of Event] DESC", Conn); SqlDataReader reader = com.ExecuteReader(); startTime = DateTime.Now; string time = now.ToString(); if (!reader.HasRows) { reader.Close(); cmd = new SqlCommand("insert into [TimerLogs] values(@time,@appName,@appltitle,@Elapsed_Time,@userName)", Conn); cmd.Parameters.AddWithValue("@time", time); cmd.Parameters.AddWithValue("@appName", appName); cmd.Parameters.AddWithValue("@appltitle", appltitle); cmd.Parameters.AddWithValue("@Elapsed_Time", blank.ToString()); cmd.Parameters.AddWithValue("@userName", userName); cmd.ExecuteNonQuery(); Conn.Close(); } else if(reader.HasRows) { reader.Read(); if (appltitle != reader.ToString()) { reader.Close(); endTime = DateTime.Now; appduration = endTime.Subtract(startTime); cmd = new SqlCommand("insert into [TimerLogs] values (@time,@appName,@appltitle,@Elapsed_Time,@userName)", Conn); cmd.Parameters.AddWithValue("@time", time); cmd.Parameters.AddWithValue("@appName", appName); cmd.Parameters.AddWithValue("@appltitle", appltitle); cmd.Parameters.AddWithValue("@Elapsed_Time", appduration.ToString()); cmd.Parameters.AddWithValue("@userName", userName); cmd.ExecuteNonQuery(); reader.Close(); Conn.Close(); } } } } catch (Exception) { } //} #endregion ActivityTimer.Start(); Processing = "Working"; } Unfortunately this is the result. it is not saving the data as I expect it to. What am i doing wrong I had thought that with the sql reader it would first check for a value and only save if they do not match however it is saving whether there is a match or not.

  Read the article

• How change LOD in geometry?

  - by ChaosDev

  Im looking for simple algorithm of LOD, for change geometry vertexes and decrease frame time. Im created octree, but now I want model or terrain vertex modify algorithm,not for increase(looking on tessellation later) but for decrease. I want something like this Questions: Is same algorithm can apply either to model and terrain correctly? Indexes need to be modified ? I must use octree or simple check distance between camera and object for desired effect ? New value of indexcount for DrawIndexed function needed ? Code: //m_LOD == 10 in the beginning //m_RawVerts - array of 3d Vector filled with values from vertex buffer. void DecreaseLOD() { m_LOD--; if(m_LOD<1)m_LOD=1; RebuildGeometry(); } void IncreaseLOD() { m_LOD++; if(m_LOD>10)m_LOD=10; RebuildGeometry(); } void RebuildGeometry() { void* vertexRawData = new byte[m_VertexBufferSize]; void* indexRawData = new DWORD[m_IndexCount]; auto context = mp_D3D->mp_Context; D3D11_MAPPED_SUBRESOURCE data; ZeroMemory(&data,sizeof(D3D11_MAPPED_SUBRESOURCE)); context->Map(mp_VertexBuffer->mp_buffer,0,D3D11_MAP_READ,0,&data); memcpy(vertexRawData,data.pData,m_VertexBufferSize); context->Unmap(mp_VertexBuffer->mp_buffer,0); context->Map(mp_IndexBuffer->mp_buffer,0,D3D11_MAP_READ,0,&data); memcpy(indexRawData,data.pData,m_IndexBufferSize); context->Unmap(mp_IndexBuffer->mp_buffer,0); DWORD* dwI = (DWORD*)indexRawData; int sz = (m_VertexStride/sizeof(float));//size of vertex element //algorithm must be here. std::vector<Vector3d> vertices; int i = 0; for(int j = 0; j < m_VertexCount; j++) { float x1 = (((float*)vertexRawData)[0+i]); float y1 = (((float*)vertexRawData)[1+i]); float z1 = (((float*)vertexRawData)[2+i]); Vector3d lv = Vector3d(x1,y1,z1); //my useless attempts if(j+m_LOD+1<m_RawVerts.size()) { float v1 = VECTORHELPER::Distance(m_RawVerts[dwI[j]],m_RawVerts[dwI[j+m_LOD]]); float v2 = VECTORHELPER::Distance(m_RawVerts[dwI[j]],m_RawVerts[dwI[j+m_LOD+1]]); if(v1>v2) lv = m_RawVerts[dwI[j+1]]; else if(v2<v1) lv = m_RawVerts[dwI[j+2]]; } (((float*)vertexRawData)[0+i]) = lv.x; (((float*)vertexRawData)[1+i]) = lv.y; (((float*)vertexRawData)[2+i]) = lv.z; i+=sz;//pass others vertex format values without change } for(int j = 0; j < m_IndexCount; j++) { //indices ? } //set vertexes to device UpdateVertexes(vertexRawData,mp_VertexBuffer->getSize()); delete[] vertexRawData; delete[] indexRawData; }

  Read the article

• ConcurrentDictionary<TKey,TValue> used with Lazy<T>

  - by Reed

  In a recent thread on the MSDN forum for the TPL, Stephen Toub suggested mixing ConcurrentDictionary<T,U> with Lazy<T>.  This provides a fantastic model for creating a thread safe dictionary of values where the construction of the value type is expensive.  This is an incredibly useful pattern for many operations, such as value caches. The ConcurrentDictionary<TKey, TValue> class was added in .NET 4, and provides a thread-safe, lock free collection of key value pairs.  While this is a fantastic replacement for Dictionary<TKey, TValue>, it has a potential flaw when used with values where construction of the value class is expensive. The typical way this is used is to call a method such as GetOrAdd to fetch or add a value to the dictionary.  It handles all of the thread safety for you, but as a result, if two threads call this simultaneously, two instances of TValue can easily be constructed. If TValue is very expensive to construct, or worse, has side effects if constructed too often, this is less than desirable.  While you can easily work around this with locking, Stephen Toub provided a very clever alternative – using Lazy<TValue> as the value in the dictionary instead. This looks like the following.  Instead of calling: MyValue value = dictionary.GetOrAdd( key, () => new MyValue(key)); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would instead use a ConcurrentDictionary<TKey, Lazy<TValue>>, and write: MyValue value = dictionary.GetOrAdd( key, () => new Lazy<MyValue>( () => new MyValue(key))) .Value; This simple change dramatically changes how the operation works.  Now, if two threads call this simultaneously, instead of constructing two MyValue instances, we construct two Lazy<MyValue> instances. However, the Lazy<T> class is very cheap to construct.  Unlike “MyValue”, we can safely afford to construct this twice and “throw away” one of the instances. We then call Lazy<T>.Value at the end to fetch our “MyValue” instance.  At this point, GetOrAdd will always return the same instance of Lazy<MyValue>.  Since Lazy<T> doesn’t construct the MyValue instance until requested, the actual MyClass instance returned is only constructed once.

  Read the article

• Hyper-V for Developers Part 1 Internal Networks

  Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• Where are my date ranges in Analytics coming from?

  - by Jeffrey McDaniel

  In the P6 Reporting Database there are two main tables to consider when viewing time - W_DAY_D and W_Calendar_FS.  W_DAY_D is populated internally during the ETL process and will provide a row for every day in the given time range. Each row will contain aspects of that day such as calendar year, month, week, quarter, etc. to allow it to be used in the time element when creating requests in Analytics to group data into these time granularities. W_Calendar_FS is used for calculations such as spreads, but is also based on the same set date range. The min and max day_dt (W_DAY_D) and daydate (W_Calendar_FS) will be related to the date range defined, which is a start date and a rolling interval plus a certain range. Generally start date plus 3 years.  In P6 Reporting Database 2.0 this date range was defined in the Configuration utility.  As of P6 Reporting Database 3.0, with the introduction of the Extended Schema this date range is set in the P6 web application. The Extended Schema uses this date range to calculate the data for near real time reporting in P6.  This same date range is validated and used for the P6 Reporting Database.  The rolling date range means if today is April 1, 2010 and the rolling interval is set to three years, the min date will be 1/1/2010 and the max date will be 4/1/2013.  1/1/2010 will be the min date because we always back fill to the beginning of the year. On April 2nd, the Extended schema services are run and the date range is adjusted there to move the max date forward to 4/2/2013.  When the ETL process is run the Reporting Database will pick up this change and also adjust the max date on the W_DAY_D and W_Calendar_FS. There are scenarios where date ranges affecting areas like resource limit may not be adjusted until a change occurs to cause a recalculation, but based on general system usage these dates in these tables will progress forward with the rolling intervals. Choosing a large date range can have an effect on the ETL process for the P6 Reporting Database. The extract portion of the process will pull spread data over into the STAR. The date range defines how long activity and resource assignment spread data is spread out in these tables. If an activity lasts 5 days it will have 5 days of spread data. If a project lasts 5 years, and the date range is 3 years the spread data after that 3 year date range will be bucketed into the last day in the date range. For the overall project and even the activity level you will still see the correct total values.  You just would not be able to see the daily spread 5 years from now. This is an important question when choosing your date range, do you really need to see spread data down to the day 5 years in the future?  Generally this amount of granularity years in the future is not needed. Remember all those values 5, 10, 15, 20 years in the future are still available to report on they would be in more of a summary format on the activity or project.  The data is always there, the level of granularity is the decision.

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >