Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 302/907 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309 | Next Page >

fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

- by Late

Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

Read the article
How can find out the device Id of my unmounted DVD?

- by fred.bear

When I put a DVD into the DVD drive, it appears in Nautilus Places, but is not automatically mounted. (this is by personal choice). In this unmounted state, mount (of course) reports nothing, and likewise for df.. but Nautilus is aware of the DVD hardware unit and has read the Label; which it shows in Places So it seems to me that Nautilus has already accessed the DVD devices (Did it temporarily mount it?)... The main point of my question was to determine how to find the device Id of an unmounted device .. but as I've been writing this, I now think it may not be as simple as that... This issue came up because I wanted to test this command cat iso-pieces.* | growisofs -Z /dev/dvd=/dev/stdin, but then realized that I didn't know how to get my DVD's device Id. ... and does the above command requires a mounted device, or does it write directly to the device? ... as you can see, I'm a bit vague about devices :) Come to think of it maybe Nautalus read the DVD device directly, because when all is said and done, something has to read/write directly to it. info growisofs says: Under Linux it will most likely be an ide-scsi device such as "/dev/scd0 How can I find this Id via a script?

Read the article
Locked out by changing file permissions

- by Valeriy

I just locked my root account (and all other accounts if it matters) completely out of the RHEL 5.4 by changing permissions on every file to 400. Now I have "Permission denied" on any command that I try to run, including chmod itself. Any idea on how to recover? The only access I have to the server is via terminal or SSH. (If anyone cares how it happened, I was running a hardening script and one of the lines was supposed to change permission on some config files in /etc directory. It has couple of variables that had not been set, so the command essentially evaluated to chmod -R 0400 /* Ouch! This is sure a great lesson on checking the scripts even more carefully in the future but what can I do now?

Read the article
Interactive mode of PSExec not working for console application

- by Focker

I am trying to use PSExec to kick off a console application on a remote computer in an interactive state. When I run something like this: PsExec.exe -s -d -i 1 \\MyServer notepad.exe It launches Notepad just fine. If I then run this: PsExec.exe -s -d -i 1 \\MyServer C:\Temp\MyConsoleApp.exe It launches the command windows but doesn't do anything as far as I can tell. As in, when I run my console application locally, it displays a "heartbeat" every 5 seconds, but when I run it remotely, nothing is displayed in the command window. The .exe does show up as a process in Task Manager. Any ideas?

Read the article
Trying to grok Linux quotas, where is the data stored?

- by CarpeNoctem

So all the tutorials and documentation for the Linux quota system has left me confused. For each filesystem with quotas enabled/on where is the actual quota information stored? Is it filesystem metadata or is it in a file? Say user foo creates a new file on /home. How does the kernel determine whether user foo is below their hard limit? Does the kernel have to tally up quota information on that filesystem each time or is it in the superblock or somewhere else? As far as I understand, the kernel consults the aquota.user file for the actual rules, but where is the current quota usage data stored? Can this be viewed with any tools outside repquota and the like? TIA!! Update: Thanks for the help. I had already read that mini-HOWTO. I am pretty clear on the usage of the user space tools. What I was unclear on is whether the usage data was ALSO in the file that stored per-user limits and you answered this with a yes. From what I can tell, rc.sysinit runs quotacheck and quotaon on startup. The quotacheck program analyzes the filesystem, updates the aquota.* files. It then makes use of quota.h and the quotactl() syscall to inform the kernel of quota info. From this point forward the kernel hashes that information and increments/decrements quota stats as changes occur. Upon shutdown, the init.d/halt script runs the quotaoff command RIGHT before the filesystems are unmounted. The quotaoff command does not appear to update the aquota.* files with the information the kernel has in memory. I say this because the {a,c,m}times for the aquota.user file are only updated upon a reboot of the system or by manual running the quotacheck command. It appears - as far as I can tell - that the kernel just drops it's up-to-date usage data on the floor at shutdown. This information is never used to update the aquota.* files. They are updated during startup by quotacheck(rc.sysinit). Seems silly to me since that updated info had already been collected by the kernel. So...in conclusion I am still not entirely clear on the methods. ;)

Read the article
Run Grunt task in Visual Studio Release Build with a bat file

- by Aligned

Originally posted on: http://geekswithblogs.net/Aligned/archive/2014/08/19/run-grunt-task-in-visual-studio-release-build-with-a.aspx 1. Add a BeforeBuild in your csproj file. Edit the xml with a text editor. <Target Name="BeforeBuild"> <Exec Condition="'$(Configuration)' == 'Release'" Command="script-optimize.bat" /> </Target> 2. Create the script-optimize.batREM "%~dp0" maps to the directory where this file exists cd %~dp0\..\YourProjectFolder call npm uninstall grunt call npm uninstall grunt call npm install --cache-min 604800 -g grunt-cli call npm install --cache-min 604800 grunt typescript requirejs copy less:compile less:mincompileThis grunt command will compile typescript, run the requireJs optimizer, complie and minimize less.3. Make it use the minified code when the Web.config compilation debug is set to false  <Target Name="CustomCollectFiles"> <ItemGroup> <_CustomFiles Include="Scripts-Release\**\*" /> </ItemGroup> </Target> That should be all you need to get a Grunt task to minify and combine JS (plus other tasks) in Visual Studio Release build with debug = false. This is a great video of Steve Sanderson talking about SPAs, npm, Knockout, Grunt, Gulp, ect. I highly recommend it.

Read the article
Vim: I don't want to insert!!!

- by bhh1988

I could not find anything online addressing this problem, which is surprising. The problem is that I find it very easy to accidentally insert stuff in Vim. I know I can undo by with 'u', but it still is quite annoying and frequent. Often, I enter a command like 'sp file.txt' without realizing that I haven't entered the ':' character yet (so I'm not yet on the command line). Unfortunately, there are several characters that take you to insert mode, including 's', 'a', 'i', 'o'. I'd rather have insert mode mapped to just one keybinding which is very deliberate, like shift-space. Can anyone point me to something that might have what I'm looking for? Thanks.

Read the article
How to use psexec without admin privileges on target machine?

- by HighCommander4

Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

Read the article
NetDiag + TCP Blocking?

- by CrazyNick

We are facing some issue with the sharepoint 2007 timer jobs everyday at a specific time, so decide to track the tcp blocking informartion during those hours using NetDiag tool. We are not able to find the required information if we uses "netdiag /test:ipsec", what is the command that can be used to pull the TCP blocking information and how to configure it? if i ran the command "netdiag /test:ipsec /debug" it is returning "IP Security test . . . . . . . . . : Skipped", what does it mean?

Read the article
Install Git on a Media Temple (dv) 4.0 server

- by Chris

I'm trying to install Git on my Media Temple (dv) 4.0 server. I've followed these instructions. It seems to have "installed", as there are a boat-load of files in the /root/git-2012-06-06 directory. However, when I perform any git command in the server, I receive this message: git: command not found My assumption is that something, somewhere is not configured properly, but I have no idea where to start. Could anybody lend a hand / offer some pointers? (And if you hadn't guessed, I'm pretty new to all this, so please be kind!)

Read the article
How do I make my "volume up" more powerful in Win7?

- by joon

My volume up button raises the volume by 1%. Its also not a button, it's a weird 'touch' thing which is really really terrible. If I want to lower the volume, I have to awkwardly rub it for a while. If it were to decrease by 5% or 10% it would be a lot better. Can this be set somewhere in Windows/Keyboard settings? I got close to a solution with Autohotkey, where I could do this: a::Send {Volume_Up 5} which would send the volume up command five times, however when I assign it to the volume key, it forms an endless loop since the Send command sends Volume_Up and parses it at the same time. Update: I ended up with this script: $Volume_Up::VolumeUp() $Volume_Down::VolumeDown() VolumeUp( ) { Send {Volume_Up 6} SoundBeep, 750, 50 } VolumeDown( ) { Send {Volume_Down 6} SoundBeep, 750, 50 }

Read the article
Problems when loop over a series of ssh-ed commands

- by Jack Medley

I have a series of server machines which I want to run the same command on. Each command takes hours and (even though I am running the commands using nohup and setting them to run in the background) I have to wait for each to finish before the next starts. Here is roughly how I have set it up: On the host machines: for i in {1..9}; do ssh RemoteMachine${i} ./RunJobs.sh; done Where RunJobs.sh on each remote machine is: source ~/.bash_profile cd AriadneMatching for file in FileDirectory/Input_*; do nohup ./Executable ${file} & done exit Does anyone know of a way such that I dont have to wait for each job to finish before the next starts? Or alternatively a better way of doing this, I have a feeling what I am do is fairly sub-optimal. Cheers, Jack

Read the article
Setting http_proxy for Chromium in shell

- by iceboal

In order to set proxy in Chromium browser, one needs to go to Settings ? Under the Hood ? Change Proxy Settings ? Network Proxy. It's too complicated. How do I set http_proxy in shell? I've tried export http_proxy=http://127.0.0.1:8080/ But it doesn't seem to work. Also, if you only want to set the proxy on the Chromium browser -- not your entire network -- the command line is the only way to set the proxy just for the browser. How can one set the proxy on Chromium -- using the command line -- to solve this problem?

Read the article
PHP `virtual()` with Apache MultiViews not working after upgrade to Ubuntu 12.04

- by Izzy

I use PHP's virtual() directive quite a lot on one of my sites, including central elements. This worked fine for the last ~10 years -- but after upgrading (or rather moving, as it is on a new machine) to Ubuntu 12.04 it somehow got broken. Example setup (simplified) To make it easier to understand, I simplify some things (contents). So say I need a HTML fragment like <P>For further instructions, please look <A HREF='foobar'>here</P> in multiple pages. 10 years ago, I used SSI for that, so it is put into a file in a central place -- so if e.g. the targeted URL changes, I only need to update it in one place. To serve multiple languages, I have Apache's MultiViews enabled -- and at $DOCUMENT_ROOT/central/ there are the files: foobar.html (English variant, and the default) foobar.html.de (German variant). Now in the PHP code, I simply placed: <? virtual("/central/foobar"); ?> and let Apache take care to deliver the correct language variant. The problem As said, this worked fine for about 10 years: German visitors got the German variant, all others the English (depending on their preferred language). But after upgrading to Ubuntu 12.04, it no longer worked: Either nothing was delivered from the virtual() command, or (in connection with framesets) it even ended up in binary gibberish. Trying to figure out what happens, I played with a lot of things. I first thought MultiViews was (somehow) not available anymore -- but calling http://<server>/central/foobar showed the right variant, depending on the configured language preferences. This also proved there was nothing wrong with file permissions. The error.log gave no clues either (no error message thrown). Finally, just as a "last ressort", I changed the PHP command to <? virtual("central/foobar.html"); ?> -- and that very same file was in fact included. So PHP's virtual() function basically worked -- but the language dependend stuff obviously did no longer work together with it as it did before. Of course I tried to find some change (most likely in PHP's virtual() command), using Google a lot, and also searching the questions here -- unfortunately to no avail. Finally: The question Putting "design questions" aside (surely today I would design things differently -- but at least currently I miss the time to change that for a quite huge amount of pages): What can be done to make it work again? I surely missed something -- but I cannot figure out what...

Read the article
Vim - select text highlighted by search?

- by GorillaSandwich

In vim, I often perform searches to hop to a word or phrase instead of navigating there with h/j/k/l. Then I hit n to hop between occurrences. Say I've got this text: Time flies like an arrow; fruit flies like a banana. - Groucho Marx I type /an arrow and hit enter. That phrase is highlighted, and I jump to it. Now I want to visually select that text, maybe to change it or delete it. (Yes, I'm aware of the :s substitution command.) Since my cursor is at the letter "a" at the beginning of "an arrow," I can hit v, then press e a couple of times to highlight the entire phrase. But I have a feeling there's a shorter and more semantic way. After all, I've already specified the text I'm interested in. How might I compose a command to say "visually select the current search selection?"

Read the article
Automatically detecting temperature sensors on startup (Ubuntu 10.10)

- by dpitch40

I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

Read the article
Windows 7 losing one of my displays after restart

- by j_kubik

I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

Read the article
Xen find VBD id for physical disks

- by Joe

I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

Read the article
Unity is broken after upgrading to 12.10 (Optimus laptop)

- by SyS

I upgraded to GNU/Linux Ubuntu 12.10 but have been unable to use Unity properly afterwards. Indeed, I encountered the exact same problem as a lot of people: the Unity side and top bars are not displaying, although in my case, Unity seems completely broken, as I can't even right-click. However, in my case, it's worth noticing that I have an Optimus laptop with a Nvidia graphics card (GeForce GT 540M). Bumblebee and its 'optirun' command is working just fine, as usual, after the upgrade. I tried several things, as resetting Compiz and Unity (with the command 'setside unity') -- which works but I have to do it everytime I boot and it resets all my settings -- updating/reinstalling/reconfiguring my Nvidia drivers as well as bumblebee, trying with Nouveau drivers instead of nvidia-current, check if linux-headers-generic were installed (they were). However, I couldn't reset xorg.conf files as they're just not there. There is neither xorg.conf file, nor its backup in /etc/X11. I think this is where the problem comes from, although I'm far from an expert. Maybe retrieving a xorg.conf file will fix this mess, but I have no idea how to do that. I'm just tired and don't know what to do. So, here I am, begging for your help.

Read the article
Map folder as drive permanently in Windows

- by MajesticRa

Lets say I need to map folder C:/D as drive D: One can use SUBST command to map folder as drive in Windows. SUBST d: C:/D I am absolutely happy how SUBST does the work. So I set this command as a startup task using the task manager. A problem here is that if I have a flash in a USB port while booting Windows, the flash is got mapped as D: and SUBST fails. The question is how to make C:/D to be D: permanently. So other drives (especially flash drives) don't break this during startup. P.S. I know I could set D: to be R: which is unlikely to conflict with other drives. But I would greatly appreciate another answer.

Read the article
Table 'mysql.host' doesn't exist

- by eriktm

100913 10:21:29 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql /usr/local/mysql/libexec/mysqld: Table 'mysql.plugin' doesn't exist 100913 10:21:29 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 100913 10:21:29 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist 100913 10:21:29 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended This is the output from the log-file for mysqld I get when I try to start mysqld with the mysqld_safe command. I tried to run mysql_upgrade to correct the first error, but this command seems to require the server to be started, which is my original problem. Next, it says that the table mysql.host does not exist. I was unable to figure out what this is caused by.

Read the article
Creating a Scheduled Task that runs forever on Windows XP

- by Mike Fiedler

When I create a scheduled task, I do so via command line: schtasks.exe /Create /TN "startup-script" /TR "C:\startup.bat" /RU taskuser /RP taskpasswd /SC ONLOGON The idea is that this task run forever. The batch opens a java process that is never meant to end. I've used ONLOGON, as the machine auto-logs in as taskuser. All this works fine, for about 72 hours, after which the Duration flag kicks in and ends the process. Windows XP doesn't have the /DU flag on command line - is there an alternative method to creating a task that is meant to run from a system startup (doesn't even require logon) and runs forever, without touching a GUI?

Read the article
Broadcasted networks appear cached with netsh? [on hold]

- by Joe

We have a company mandate to hide certain windows functions. I'm working on a company application which will allow my users to configure WiFi networks. The app is scanning broadcasted networks using: "netsh wlan show networks" it will return networks that have been turned off. For example: I will run the command and then unplug my wireless router with the SSID "Netgear". For several minutes after turning off the network, the show networks command will continue to return "Netgear". Does anyone know where this gets cached, how to clear it out, or how to force a fresh scan of "netsh wlan show networks"? Thanks all, J

Read the article
Disable "Print and Close" Preview Shortcut on OS X Mountain Lion (10.8.2)

- by Twitch_City

I recently upgraded to Mountain Lion from Leopard and there is a global shortcut that I would really like to disable. Apparently, now if you select a document and press Command + p, Preview will open, print the document, then close. I'm sure this was done with the purest intentions but, unfortunately, it is right next to Command + o, which I use many times a day to open files. Since installing Mountain Lion, I've accidentally printed way too many documents just trying to open them! I've gone into the Keyboard preference pane and tried to find where this shortcut is located, but haven't had any success. Anyone know how I can disable this?

Read the article
NetDiag + TCP Blocking?

- by CrazyNick

We are facing some issue with the sharepoint 2007 timer jobs everyday at a specific time, so decide to track the tcp blocking informartion during those hours using NetDiag tool. We are not able to find the required information if we uses "netdiag /test:ipsec", what is the command that can be used to pull the TCP blocking information and how to configure it? if i ran the command "netdiag /test:ipsec /debug" it is returning "IP Security test . . . . . . . . . : Skipped", what does it mean?

Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309 | Next Page >