Search Results

Search found 22668 results on 907 pages for 'command prompt'.

Page 298/907 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Can you specify git-shell in .ssh/authorized_keys to restrict access to only git commands via ssh?

  - by Matt Connolly

  I'd like to be able to use a ssh key for authentication, but still restrict the commands that can be executed over the ssh tunnel. With Subversion, I've achieved this by using a .ssh/authorized_keys file like: command="/usr/local/bin/svnserve -t --tunnel-user matt -r /path/to/repository",no-port-forwarding,no-agent-forwarding,no-X11-forwarding,no-pty ssh-rsa AAAAB3NzaC1yc2EAAAABIetc... I've tried this with "/usr/bin/git-shell" in the command, but I just get the funky old fatal: What do you think I am? A shell? error message.

  Read the article

• 403 forbidden error from cron

  - by user112570

  I have some php code that runs fine in a browser but now I want to use the same code and execute it from a cron script I'm getting issues. i tried the command on cron wget -O /dev/null http://www.mydomain.com/test.php but if i try that in the terminal i get the error below. What is the correct command to run a php file from cron? and do I need to add extra line of code to the top of my php file? The problem I'm getting is -bash-3.2$ wget -O /dev/null http://www.mydomain.com/test.php --2012-04-08 15:59:41-- http://www.mydomain.com/test.php Resolving www.mydomain.com... 46.***.***.1 Connecting to www.mydomain.com|46.***.***.1|:80... connected. HTTP request sent, awaiting response... 403 Forbidden 2012-04-08 15:59:41 ERROR 403: Forbidden. I gave the file 755 permissions and even 777 permissions, but can't see what I'm doing wrong.

  Read the article

• Git clone on an ovh host server

  - by newben

  I want to do a git-clone from an ssh connection, on an ovh host-server, but it does not work: Here's the command I entered: git clone ssh :/ / [email protected] / www / (and all variations /. Git / www / .git, / www / .git / ... ) This is the message that I invariably get: fatal: '/ www': unable to chdir or not a git archive fatal: The remote end hung up unexpectedly Moreover, the command git clone "ssh :/ / [email protected] / ~ / forumdesthinktanks.git" responded with: Permission denied, please try again. [email protected] 's password: While the ftp password is correct. Finally, the commands git clone ssh :/ / [email protected] /. Git and git clone ssh :/ / [email protected] / ~ / forumdesthinktanks.git do not work (until the terminal's time out). I'm using a terminal from my Mac.

  Read the article

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• A button to set all processes to on-hold for Linux?

  - by fuenfundachtzig

  When Linux starts swapping you're basically doomed. Very soon the system won't react to any input any more, but happily swap on until the end of days... Can you think of a command that holds all processes whatsoever, thus (and while) allowing you to open a clean shell where you can examine the source of the problem and kill the process which ate up all the memory? (I guess this won't be easy, because as the memory is probably completely filled up you'd need to swap out some more memory to gather space for opening a shell, on the other hand all other swapping processes must be stopped.) If you tied such a command to a hot key then maybe you can use this as an emergency button saving you a lot a time. Any ideas if this is possible at all? Has somebody tried something like this before? If one could realize this it would be a cool feature :)

  Read the article

• For Loop counting from 1 to n in a windows bat script

  - by raoulsson

  I need to run a windows command n times within a bat script file. I know how to do this in various programming languages but cannot manage to get it right on the windows command line :-( I would expect something like either for(int i = 0; i < 100; i++) { // do something } or even this (though not entirely seriously) 1.upto(100, { // do something }) Thanks! EDIT I can write a program in java, perl, c or whatever that will generate a bat script that looks like this for %%N in (1 2 3 4 5 6 7 8 9 10 11 12) do echo %%N and so on. Or even "better": echo 1 echo 2 echo 3 echo 4 echo 5 echo 6 echo 7 echo 8 echo 9 echo 10 echo 11 echo 12 and then execute it... But the thing is that I need a concise way to specify a range of numbers to iterate through within the script. Thanks!

  Read the article

• How to use second volume devide of amazon EC2

  - by Khoyendra Pande

  I have two volumes of amazon EC2 where by default 1 GiB volume using which has fulled. Now I want to use my second volume which is 9 Gim. I used command cat /proc/partitions I got major minor #blocks name 202 1 1048576 xvda1 202 80 9437184 xvdf Then I hit mkfs.ext3 -F /dev/sdf its showing mkfs.ext3: No such file or directory while trying to determine filesystem size then I hit command df and I got Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 1032088 1031280 0 100% / tmpfs 313160 8 313152 1% /lib/init/rw udev 297800 24 297776 1% /dev tmpfs 313160 4 313156 1% /dev/shm overflow 1024 32 992 4% /tmp means still I am unable to use my 9 GiB space Volume. I am conform I have two volume where attachment information is i-7e4fb41c:/dev/sda1 (attached) and i-7e4fb41c:/dev/sdf (attached) where only sda1 is using. Any one know how may I use my second volume(sdf). Thx

  Read the article

• How to rsync a large file, with as little CPU and bandwidth expense as possible?

  - by Johan Allgoth

  I have a 500 GB file that I plan on backing up remotely. The file changes often. I'll be rsyncing it from a desktop to a server. Both can run rsync client or server. What is the proper command for this? The ones I've tried sofar has been taking forever or simply acted strange. Example and results: rsync -cv --partial --inplace --no-whole-file /desktop/file1 myserver.com::module/file1 Seems to work, but only if I do it twice (?!). Also, slow. Does the above command do the checksumming on both computers, or only on the sending one? Is it correct otherwise?

  Read the article

• Bizarre SSH Problem - It won't even start

  - by thallium85

  I recently got Ubuntu 12.04 Precise, got it up and running with some MediaWiki software, static IP on the box and router and was able to access the main page even from a cell phone. Everything seemed great... Then I wanted to finally get rid of the monitor and keyboard and login remotely via SSH. I installed openssh-server, let everything point to port 22 for a test run and installed putty on my Windows XP machine. I got a connection refused. Went back and started checking the Ubuntu install itself... (I'm under root from this point on) $ sudo -s $ service ssh status ssh stop/waiting $ service ssh start ssh start/running, process 2212 $ service ssh status ssh stop/waiting Apparently ssh has stopped or is waiting for something.... $ ssh localhost ssh: connect to host localhost port 22: Connection refused I can't even connect to myself... I checked ufw (firewall) to see if port 22 is doing alright... $ sudo ufw status Status: active To Action From 22 ALLOW Anywhere 22/tcp ALLOW Anywhere 22 ALLOW Anywhere (v6) 22/tcp ALLOW Anywhere (v6) sshd_config shows only Port 22 Is ssh not using the right IP address at all? I just don't get what I did wrong here. When this is up and running I will def change the port number, but for now, I don't want to mess with the default install too much until a test run with putty is successful. Edit: Here are my sshd_config file and my ssh_config file. The command /usr/sbin/sshd -p 22 -D -d -e returns: /etc/ssh/sshd_config line 159: Subsystem 'sftp' already defined. Edit: @phoibus moving the sshd_config file and reinstalling did the trick! service ssh status the above command shows that ssh is now running and I am now able to log in from my windows xp computer remotely via putty. Thanks so much! I can now use my monitor for other things!

  Read the article

• Recognizing Dell EquilLogic with Nagios

  - by user3677595

  EDIT: All firmware and models are compatible, that is why nothing is posted about it. Okay, so there will be a lot here, so please bare with me. I've been working on this now for a few hours (reading manuals and such) so I'm not just coming here right out of the blue. I am working on a PRE-EXISTING Nagios server where there are several other existing plugins and checks running and working. Now I want to add another server there to check so I made the following modifications: First and foremost, I added a file to /usr/local/nagios/libexec named: check_equallogic.sh. The permissions are 755, the same as all others. I have chowned to nagios:nagios and in the listing it shows the Owner as Nagios. I then added a command to the commands.cfg file in \usr\local\nagios\etc\objects that shows the following: # 'check_equallogic' command definition define command{ command_name check_equallogic command_line $USER1$/check_equallogic -H $HOSTADDRESS$ -C $ARG1$ -t $ARG2$ $ARG3$ } Following this, I created a file named equallogic.cfg in the objects directory and it contains (more or less): define host{ use linux-server ; Inherit default values from a template host_name 172.16.50.11 ; The name we're giving to this device alias EqualLogic ; A longer name associated with the device address 172.16.50.11 ; IP address of the device contact_groups admins } Check Equallogic Information define service{ use generic-service host_name 172.16.50.11 service_description General Information check_command check_equallogic!public!info } After ensuring that permissions are okay for all files, I restart the nagios service, no errors. When I go into the WebGUI, I get the following errors AFTER the check runs: (Return code of 127 is out of bounds - plugin may be missing) Extra, probably unrelated problem Furthermore, when I log into the EquilLogic server, under Audit logs I get the following error: Level: AUDIT Time: 26/05/2014 3:59:13 PM Member: ps4100-1 Subsystem: agent Event ID: 22.7.1 SNMP packet validation failed, request received from 172.16.10.11 An snmpwalk receives a timeout, whereas others succeed. I will work on importing the MIBs tomorrow. The reason why I am mentioning it is because I want to make sure that it is only a MIB issue for the SNMP. If it is, then ignore this area. I am entirely unsure of what to do here.

  Read the article

• How to query a DHCP server to get the local DNS servers

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• Commands don't have permission when using absplute path

  - by Markos

  I have folders set up this way: /srv/samba/video getfacl /srv/samba/video # file: srv/samba/video # owner: root # group: nogroup user::rwx group::--- group:sambaclients:rwx group:deluge:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:sambaclients:rwx default:group:deluge:rwx default:mask::rwx default:other::--- That means, user deluge has rwx to folder /srv/samba/video. However, when running command as user deluge, I am getting weird permission errors. When in folder /srv/samba/video: sudo -u deluge mkdir foo works flawlessly. But when using absolute path: sudo -u deluge mkdir /srv/samba/video/foo I am getting permission denied. When running sudo -u deluge id, I get output uid=113(deluge) gid=124(deluge) skupiny=124(deluge) which shows that user deluge is indeed in group deluge. Also, the behavior was the same when I gave the permissions also to user deluge not just group deluge. When executing as non-system user, it does work. The reason that I want to use absolute paths is that I am using automatically triggered post-download script which extracts some files into the folder. I have spent way too many hours to solve this problem myself. mkdir isn't the only command that fails, touch is doing the same thing, so I suspect that it's not mkdir's fault. If you need more info, I will try to put it in here, just ask. Thanx in advance.

  Read the article

• XCP vm created via xl create doesn't show up in Xencenter neither in xe vm-list

  - by user138664

  i am running XCP 1.4.90.530.170661 and i have many PV guests running and created via XenCenter. I have created now an openwrt PV guest via the xl create command but it doesn't show up in Xencenter neither in the vm-list command: xe vm-list uuid ( RO) : 6d29aac1-67ff-f83e-4dbc-894a3b6b9c10 name-label ( RW): slitaz power-state ( RO): running uuid ( RO) : 07d96dd1-8223-cd1c-587d-ae37e48d267b name-label ( RW): xen-centos6 power-state ( RO): running uuid ( RO) : 3164bcf1-e43c-badb-e0cf-5423751fffb9 name-label ( RW): xenwin7 power-state ( RO): running uuid ( RO) : 8a31725e-4bcb-48ac-ba7b-e7c1ba310789 name-label ( RW): Control domain on host: xen-mini power-state ( RO): running xl list Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 4862.5 xenwin7 2 766 1 -b---- 4933.1 slitaz 10 255 1 -b---- 30.8 xen-centos6 11 767 1 -b---- 46.9 openwrt 12 32 1 -b---- 6.8 are these two different kinds of PV vm? if yes, is there a way to export the "xl create" one as xva/ova and import it to show up like the others? Thanks in advance, /c/

  Read the article

• How to fix: Ubuntu 12.04 reboots after loading with elilo

  - by Casey

  I have an HP p6-2120 with CPU: AMD A6-3620 APU with Radeon Graphics RAM: 6GB BIOS: HO2_710.ROM v7.10 [AMI v7.10 4/19/2012] Disk: SATA1 (/dev/sda) - 1 TB (windows) Disk: SATA2 (/dev/sdb) - 1 TB partitioned using "parted -a optimal /dev/sdb" as follows: .. 1049KB 201MB FAT32 boot flag set .. 201MB 60GB ext2 (/) .. 68GB 78GB linux-swap(v1) (swap) .. 78GB 790GB ext4 (/home) .. - rest is "free" space reserved for other purposes (eventually) ubuntu: 12.04.1 LTS [specifically: Release 12.04 (precise) 64-bit] kernel: linux 3.2.0-29-generic I created a bootable EFI USB from the ISO (64-bit) which I downloaded. I can run and install from the USB without any problems. The BIOS is an EFI bios that appears to be capable of booting in either EFI or Legacy mode. Initially, I did the "standard" install with NOTHING on disk2, and let the installer configure everything. The net result of this was that when I started the computer and forced it into "boot" menu mode, it DOES NOT recognize SATA2 as an EFI drive, and when I attempt to "legacy" boot from it, I get the message "ERROR: No Boot Disk has been detected." The "standard" install created one large partition that consumed the entire disk. At that point, I manually partitioned the disk (using sudo parted -a optimal /dev/sdb) as described above. I selected the "other" install, and changed the /dev/sdb1 to "bios_grub", /dev/sdb2 as "/" (ext4), /dev/sdb3 as swap, and /dev/sdb4 as "/home". [Note: fearing that possibly elilo did not recognize ext4, I switched /dev/sdb2 to ext2 and re-insalled] The net result was that the install appeared to trash the /dev/sdb1 partition so that it was NOT readable by anything. I re-formated /dev/sdb1 as FAT32 and set the boot flag. I repeated the install ignoring the messages about no bios_grub partition. After several attempts to get GRUB2 to work, I switched to elilo. I downloaded the most recent version and copied it (elilo-3.14-ia64.efi) to /dev/sdb1/efi/boot/bootx64.efi. (The BIOS boot loader did not recognize it either as elilo-3.14.ia64.efi or as elilo.efi. Based on the advice in one of the web-pages I found, I renamed it to bootx64.efi. This worked.) In that same directory (/efi/boot), I copied the file pointed to the link in /dev/sdb2/vmlinuz to /efi/boot/vmlinuz, and the file pointed to the link in /dev/sdb2/initrd.img to /efi/boot/initrd.img. I created an elilo.conf file as follows: timeout=5000 prompt default=linux-boot image=vmlinuz label=linux-boot read-only initrd=initrd.img root=/dev/sdb2 The /efi/boot directory contains 4 files: bootx64.efi elilo.conf vmlinuz initrd.img When I power-cycle the computer and force the boot menu, drive2 shows up as an EFI bootable drive. When I select it, I get the elilo prompt. Pressing , it appears to load the kernal (I have tried it with verbose=5, and there is a long string of messages with the final one a command line to load the kernel and a series of several dots that fly by) then the screen goes blank, and it reboots the computer. [Note: I have also tried substituting the UUID as found in the /etc/fstab of the installed system for the root directory. This had no effect.] This is a brief synopsis of several nights of fiddling with this. I would deeply appreciate any help you can give.

  Read the article

• Speed up ADF Mobile Deployment to Android with Keystore

  - by Shay Shmeltzer

  As you might have noticed from my latest ADF Mobile entries, I'm doing most of my ADF Mobile development on a windows machine and testing on an Android device. Unfortunately the Android/windows experience is not as fast as the iOS/Mac one. However, there is one thing I learned today that can make this a bit less painful in terms of the speed to deploy and test your application - and this is to use the "Release" mode when deploying your application instead of the "Debug" mode. To do this you'll first need to define a keystore, but as Joe from our Mobile team showed me today, this is quite easy. Here are the steps: Open a command line in your JDK bin directory (I just used the JDK that comes with the JDeveloper install). Issue the following command: keytool –genkey –v –keystore <Keystore Name>.keystore –alias <Alias Name> -keyalg RSA –keysize 2048 –validity 10000 Both keystore name and alias names are strings that you decide on. The keytool utility will then prompt you with various questions that you'll need to answer. Once this is done, the next step is to configure your JDeveloper preferences->ADF Mobile to add this keystore there under the release tab:  Then for your application specific deployment profile - switch the build mode from debug to release. The end result is a much smaller mobile application (for example from 60 to 21mb) and a much faster deployment cycle (for me it is about twice as fast as before).

  Read the article

• Escape a ! in the password parameter of wget

  - by Dave

  I'm trying to execute something like this: wget --user=foo --password=bar! url The ! in the password is causing problems. I've tried escaping it with \, as in --password=bar\! I've tried encapsulating in single and double quotes. I put the password in a separate file and tried --password=cat pass.txt Each time, I get a 403 Forbidden. Using -d, I see that the SSL handshake is successful. On the Windows command line, the command works. My assumption is that I need to escape the ! differently, but I don't know how else.

  Read the article

• tar - exclude certain files

  - by Alan

  I wish to tar all files in a directory and its subdirectories that do NOT end in .jpg, .bmp, .gif, or png. So, given the following folders and files: foo/file.txt foo/file.gif foo/bar/file foo/bar/image.jpg I want to tar only the files file.txt and file. file.gif and image.jpg should be ignored. I would also like to maintain the folder structure. My first thought was to pipe the results of the find command in conjunction with grep -v ".jpg|.gif|.bmp.png" to a text file, and then use the tar include argument to feed it that list of files. However, the results of the grepped find command also contain directories (in the example above, it would be "foo" and "foo/bar"), and when a directory is fed to tar, it includes all files in that directory, so I would end up with a tar file containing all of the files--not what I want. Is there any way to prevent find from outputting directories? Is there a far easier way to approach this?

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Postgresql starup script for second instance?

  - by Andrius

  I need to run my second postgresql instance when linux boots. I added this command (like in postgresql documentation) in rc.local: /usr/lib/postgresql/9.1/bin/pg_ctl start -l logfile -D /var/lib/postgresql/9.1/main2 But if I try to run pg_ctl: cannot be run as root Please log in (using, e.g., "su") as the (unprivileged) user that will own the server process. t, it gives me this error: How can I specify to run that command as postgres, but actually execute it with root (because root owns it). Or is there some better way to make second init script for postgresql? P.S. (I'm using Ubuntu)

  Read the article

• How can I programmatically change the keyboard layout?

  - by Jason R. Coombs

  I want to run a shell command or script that will configure each of my Ubuntu Precise boxes to use the Dvorak keyboard layout as the default (and only) layout. With earlier versions, I was able to set the XKBVARIANT in /etc/default/keyboard but when I make this change in Precise (and reboot), the keyboard layout appears to be unaffected (both in console and in gnome). I tried also setting the XKBMODEL to pc105 and XKBLAYOUT to us, but that did not seem to help. I know I can set the layout for gnome using the 'keyboard layout' tool... but I want the change to affect the console, and I want to automate the process. How can I accomplish this? Edit: To clarify, I want to know how I can cause to change (using only a script or command-line) the keyboard layout to be Dvorak as the default and only keyboard layout for both Gnome and the console. I want this change to be persistent (survive reboots), just as it is when the change is made through the Keyboard Layout tool. Edit: Let me put it another way. If I had installed the operating system myself (which I did not because the OS was installed by the virtual machine infrastructure), I could have selected the desired keyboard layout at install time, and that layout would be applied persistently, system-wide. How can I change the layout to appear as if I had set it during the install process?

  Read the article

• How to send a pipe with psexec?

  - by Pierre-Alain Vigeant

  I'm trying to execute a pipe on a remote server by using psexec. The command that I'm trying to execute is psexec \\servername DSQUERY USER -name *userpart* | DSGET USER -samid -display Currently, the | pipe symbol get executed locally which is not what is wanted (since dsget does not exist on my machine). I tried to use quote around the whole command psexec \\servername "DSQUERY USER -name *userpart* | DSGET USER -samid -display" but that resulted in psexec trying to run that whole quoted sentence as one executable, which obviously does not exist. How can I pass a pipe symbol to the remote server so that it can execute it?

  Read the article

• How do I modify these VPN connection settings for Xfce?

  - by Dave M G

  I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• How can I fix Problems with interlaced video jerking/flicking when playedback on DVD players? (Mixin

  - by Simon P Stevens

  I'm trying to make a DVD and the final DVD jerks when played on standalone DVD players. It seems to play fine on PCs. I think the problem may be to do with interlacing settings when rendering the final output, but I'll outline the whole editing process I have followed in case I've made a mistake somewhere else. Most of the footage comes from a sony handy cam (one of those mini DVD ones) so isn't great quality. It was set to "high quality" (haha) and 16:9 aspect ratio when it was recorded. I copy the files directly from the mini DVDs onto the hard drive and import them into Cinelerra. In Cinelerra I set the format to 25fps, 720x576, RGBA-8bit, 16:9, interlaced bottom fields first. When I've finished the editing, I add a Fields to frames effect (set to bottom first) to each video track. I render to audio and video separately: Audio: AC3, 128kbps Video: YUV4MPEG steam, video pipe settings: ffmpeg -f yuv4mpegpipe -i - -y -target dvd -flags +ilme+ildct mpeg2video % Cinelerra often crashes during the rendering, so I set it to generate a new video file at each label, and combine them using cat when I've got a sucesful render of each one. Once I've combined them, I use mencoder to re-index them: mencoder -forceidx -oac copy -ovc copy merged.m2v -o mergedReIndexed.m2v I combine the audio and video files using ffmpeg: ffmpeg -i AudioFile.ac3 -i VideoFile.m2v -target dvd -flags +ilme+ildct FinalMovie.mpg Then I build the menus with spumux and I create the DVD file system with dvdauthor, and finally I write it do a dvd-r like this: nice -n -20 growisofs -dvd-compat -speed=2 -Z /dev/dvd -dvd-video -V VIDEO ./ && eject /dev/dvd Originally, when I did it the DVD flickered badly, so as suggested in a guide I added the fields to frames effect in cinelerra. Now it doesn't "flicker", but has become "jerky" when there is lots of motion, particularly when the camera is moving, so the whole background moves. This is what I've tried so far: Removed "mpeg2video" from cinelerra video render pipe. Removed +ilme from render pipe. Removed +ildct from render pipe. Removed +ilme from render audio/video rejoin command. Removed +ildct from render audio/video rejoin command. Added -alt to render pipe. Added -alt to render audio/video rejoin command. Tried with and without the frames to fields effect in Cinelerra. and various combinations of the above. I've also tried this: change the Cinelerra fps to 50, use fields to frames (instead of frames to fields), render to an intermediate QTforlinux jpeg video stream, re-importing that back into Cinelerra, adding a frames to fields effect and then rendering that output as normal (@25fps), and I still have the same problem. Has anyone experienced this "jerking" playback before? Can anyone give any suggestions on how to fix it? (Like I say, it plays back fine on a PC, but not on any of the standalone players I've tried)

  Read the article

• SharePoint Development: Making that application pool recycle less annoying

  - by Sahil Malik

  SharePoint 2010 Training: more information If you’re like me, you’re easily distracted. What was I talking about again? Oh yes! See, whenever I am writing a farm solution that requires an application pool recycle, I hit CTRL_SHIFT_B to deploy (how to remap CTRL_SHIFT_B to deploy?).Now, I have what, a good 15-20 seconds to goof off and check my gmail/facebook/twitter/IM conversations, right? Sure .. 30 minutes later .. my application pool has died and recycled 3 times on it’s own. Hmm. Clearly, this was becoming a serious issue. So what am I supposed to do here? Well, worry not! Here is what you need to do, Right click\Properties on your SharePoint project, and look for the “SharePoint” tab. Look for post-deployment command line, and add the following post-deployment command line. (Be careful, copy paste exactly as is).   Read full article ....

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >