Search Results

Search found 8577 results on 344 pages for 'latest'.

Page 302/344 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

  • Is it safe to enable forced ASLR via EMET on Windows?

    - by D.W.
    I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

    Read the article

  • Hell: NTFS "Restore previous versions"...

    - by ttsiodras
    The hell I have experienced these last 24h: Windows 7 installation hosed after bluetooth driver install. Attempting to recover using restore points via "Repair" on the bootable Win7 installation CD. Attempting to go back one day in the restore points. No joy. Attempting to go back two days in the restore points. No joy. Attempting to go back one week in the restore points. Stil no joy. Windows won't boot. Apparently something is REALLY hosed. And then it hits me - PANIC - the restore points somehow reverted DATA files to their older versions! Word, Powerpoint, SPSS, etc document versions are all one week old now. Using the "freshest" restore point. Failed to restore yesterday's restore point!!! I am stuck at old versions of the data!!! Booting KNOPPIX, mounting NTFS partition as read-only under KNOPPIX. Checking. Nope, the data files are still the one week old versions. Booting Win7 CD, Recovery console - Cmd prompt - navigating - yep, data files are still one week old. Removing the drive, mounting it under other Win7 installation. Still old data. Running NTFS undelete on the drive (read-only scan), searching for file created yesterday. Not found. Despair. At this point, idea: I will install a brand new Windows installation, keeping the old one in Windows.old (default behaviour of Windows installs). I boot the new install, I go to my C:\Data\ folder, I choose "Restore previous versions", click on yesterday's date, and click open... YES! It works! I can see the latest versions of my files (e.g. from yesterday). Thank God. And then, I try to view the files under the "yesterday snapshot-version" of c:\Users\MyAccount\Desktop ... And I get "Permission Denied" as soon as I try to open "Users\MyAccount". I make sure I am an administrator. No joy. Apparently, the new Windows installation does not have access to read the "NTFS snapshots" or "Volume Shadow Snapshots" of my old Windows account! Cross-installation permissions? I need to somehow tell the new Windows install that I am the same "old" user... So that I will be able to access the "Users\MyAccount" folder of the snapshot of my old user account. Help?

    Read the article

  • Simple mdadm RAID 1 not activating spare

    - by Nick Liu
    I had created two 2TB HDD partitions (/dev/sdb1 and /dev/sdc1) in a RAID 1 array called /dev/md0 using mdadm on Ubuntu 12.04 LTS Precise Pangolin. The command sudo mdadm --detail /dev/md0 used to indicate both drives as active sync. Then, for testing, I failed /dev/sdb1, removed it, then added it again with the command sudo mdadm /dev/md0 --add /dev/sdb1 watch cat /proc/mdstat showed a progress bar of the array rebuilding, but I wouldn't spend hours watching it, so I assumed that the software knew what it was doing. After the progress bar was no longer showing, cat /proc/mdstat displays: md0 : active raid1 sdb1[2](S) sdc1[1] 1953511288 blocks super 1.2 [2/1] [U_] And sudo mdadm --detail /dev/md0 shows: /dev/md0: Version : 1.2 Creation Time : Sun May 27 11:26:05 2012 Raid Level : raid1 Array Size : 1953511288 (1863.01 GiB 2000.40 GB) Used Dev Size : 1953511288 (1863.01 GiB 2000.40 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Mon May 28 11:16:49 2012 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : Deltique:0 (local to host Deltique) UUID : 49733c26:dd5f67b5:13741fb7:c568bd04 Events : 32365 Number Major Minor RaidDevice State 1 8 33 0 active sync /dev/sdc1 1 0 0 1 removed 2 8 17 - spare /dev/sdb1 I've been told that mdadm automatically replaces removed drives with spares, but /dev/sdb1 isn't being moved into the expected position, RaidDevice 1. UPDATE (30 May 2012): A badblocks destructive read-write test of the entire /dev/sdb yielded no errors as expected; both HDDs are new. As of the latest edit, I assembled the array with this command: sudo mdadm --assemble --force --no-degraded /dev/md0 /dev/sdb1 /dev/sdc1 The output was: mdadm: /dev/md0 has been started with 1 drive (out of 2) and 1 rebuilding. Rebuilding looks like it's progressing normally: md0 : active raid1 sdc1[1] sdb1[2] 1953511288 blocks super 1.2 [2/1] [U_] [>....................] recovery = 0.6% (13261504/1953511288) finish=2299.7min speed=14060K/sec unused devices: <none> I'm now waiting on this rebuild, but I'm expecting /dev/sdb1 to become a spare just like the five or six times that I've tried rebuilding before. UPDATE (31 May 2012): Yeah, it's still a spare. Ugh! UPDATE (01 June 2012): I'm trying Adrian Kelly's suggested command: sudo mdadm --assemble --update=resync /dev/md0 /dev/sdb1 /dev/sdc1 Waiting on the rebuild now... My questions are: Why isn't the spare drive becoming active sync? How can I make the spare drive become active?

    Read the article

  • Cygwin's RSYNC for large data transfer

    - by Tim Brigham
    I'm using rsync from Cygwin to do a large scale data transfer from an aging HP MSA 1000 to a new DAS attached to a different server. I have a daemon running on the remote server in read only mode and a local copy writing the files to disk. One of my servers is an image repository with over a million files spread across about 300 directories. Each file averages only a couple hundred kilobytes. More so than any other box this one is proving problematic. The rsync process will work for a while - some times 20 minutes, some times an hour - and then it simply quits and sits idle at a given file name. I have verified that the file isn't corrupt on the remote server and that the file is successfully created on the local drive. I ran the rsync client in -vv mode, which returns nothing. I checked out the logs created by the daemon. I looked at the network utilization on the interface, which is sitting idle. I looked at the AV settings to see if anything could pose a problem there. I even updated to the latest release of Cygwin. What do I need to in order to keep this connection up? EDIT: The client system is using the command rsync.exe server::Drives/f/Repo/ /cygdrive/T/Repo --archive -P -vv The server is using the command rsync.exe --daemon --no-detach --config "rsyncd.conf" The contents of rsyncd.conf: use chroot = false strict modes = false hosts allow = 192.168.100.9 log file = c:/rsyncd.log uid=0 gid=0 [Drives] path = /cygdrive read only = yes EDIT: The file server is 2003, the disk type on the array is GPT and the size is of the array is about 4 TB. EDIT: Stranger.. It looks like the process is reliably erroring out at about 175,000 files. Rsync runs fine when I pick the same directory it has problems with one at a time. EDIT: rsync version 3.0.9 protocol version 30 Copyright (C) 1996-2011 by Andrew Tridgell, Wayne Davison, and others. Web site: http://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints, no socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace, append, ACLs, xattrs, iconv, symtimes A similar failure occurred when going from the same set of files with Cygwin to a Linux install. It didn't happen until several hours later than normal however.

    Read the article

  • Wireless Network Performance Issues

    - by colithium
    My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

    Read the article

  • Should use EXT4 or XFS to be able to 'sync'/backup to S3?

    - by Rafa
    It's my first message here, so bear with me... (I have already checked quite a few of the "Related Questions" suggested by the editor) Here's the setup, a brand new dedicated server (8GB RAM, some 140+ GB disk, Raid 1 via HW controller, 15000 RPM) it's a production web server (with MySQL in it, too, not just serving web requests); not a personal desktop computer or similar. Ubuntu Server 64bit 10.04 LTS We have an Amazon EC2+EBS setup with the EBS volume formatted as XFS for easily taking snapshots to S3, via AWS' console. We are now migrating to the dedicated server and I want to be able to backup our data to Amazon's S3. The main reason being the possibility of using the latest snapshot from an EC2 instance in case of hardware failure on the dedicated server. There are two approaches I am thinking of: do a "simple" file-based backup with rsync, dumping the database' and other files, and uploading to amazon via S3 API commands, or to an EC2 instance, or something. do a file-system "freeze" (using XFS) with the usual ebs/ec2 snapshot tool to take part of the file system, take a snapshot, and upload it to Amazon. Here's my question (or series of questions): Can I safely use XFS for the whole system as the main and only format on the dedicated server? If not, is it safe to use EXT4? Or should I use something else? would then be possible to make snapshots of the system to upload to Amazon? Is it possible/feasible/practical to do what I want to do, anyway? any recommendations? When searching around for S3/EBS/XFS, anything relevant to my problem is usually focused on taking snapshots of a XFS system that is already an EBS volume. My intention is to do it in a "real"/metal dedicated server. Update: I just saw this on Wikipedia: XFS does not provide direct support for snapshots, as it expects the snapshot process to be implemented by the volume manager. I had always assumed that I could choose 2 ways of doing snapshots: via LVM or via XFS (without LVM). After reading this, I realize these 2 options are more like it: With XFS: 1) do xfs_freeze; 2) copy the frozen files via, eg, rsync; 3) unfreeze xfs With LVM and XFS: 1) do xfs_freeze; 2) make a binary copy of the frozen fs via lvcreate and related commands; 3) unfreeze xfs; 4) somehow backup the LVM snapshot. Thanks a lot in advance, Let me know if I need to clarify something.

    Read the article

  • How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7?

    - by Timo
    The question says it all, but more detail follows ;) I've got a new computer that runs Windows 7 64-bits (Home Edition) and I'd like to connect it to my wireless home network (Sitecom wireless gigabit router 300N wl-352 v1 002) with a Sitecom wireless USB micro adaptapter 300 wl-352 V2 001. After installing the router (i.e. connected to the modem and power) and ensuring that wireless is indeed enabled, I've installed the driver of the USB adapter on the new computer described above. After the installation (drivers and utility on CD) completes successfull I rebooted my computer and inserted the USB adapter. After discovering the right network and connecting to it using the network key, a connection is succesfully made. (Using the Sitecom 300N USB Wireless LAN utility). In the LAN utility I can see that the signal strength is approximately 50% and connection quality is approximately 80%. Judging from these numbers I assumed that all was fine and started to use the connection (reading news on nu.nl, a dutch news site), but noticed that the connection was lost several times in a very short time span, but each time the connections was resumed, resulting in the 50/80 percent numbers described above. However, the website was not loaded completely and often a timeout would be reported. When inspecting the drivers through Device Management (Windows' Apparaatbeheer in dutch) there were no errors/warnings; everything seemed to be in order. In an attempt to solve this, I downloaded the latest drivers for the USB adapter, but the problems remained. Finally I tried to connect the computer with a Siemens Gigaset USB Adapter 108. This process was a troublesome since I had to download a driver (from the site above) and tell Windows (7) to use the Windows Vista driver when installing the new hardware, since there is (was) no Windows 7 driver available. This resulted in a usable connection, although not very stable when reconfiguring the router. Which took the form of selecting a different wireless channel on the router, even using the Sitecom utility mentioned above to check if there were other networks communicating on that channel (and thus picking a channel that was not used by other networks). Again no result when changing back to the Sitecom USB adapter. Note that this means (I think) that I could use the internet connection with the Siemens adapter, meaning the problem was not in the router. So: How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7? PS Sorry, but should be able to post one link, while I had links in place for the USB adapter, router and the siemens adapter in place as well, but I'm not (yet) allowed to post these... (The site says I can post one link, but only when no links are present will it allow me to post the question...)

    Read the article

  • resolve access violation exception (0xC0000005) crashing IIS app pool

    - by Joseph
    IIS 7.5, server 2008 r2, classic asp and asp .net 2.0, 3.5 website same server, same app pool. The past 4 weeks thousands of these errors 'C0000005' are occurring. I know from IIS debug diag tool that 'C0000005' is an access violation error. Below is the top line from my debug diag report. In w3wp__PID__6656__Date__01_08_2011__Time_01_42_46AM__281__First Chance Access Violation.dmp the assembly instruction at asp!CActiveScriptEngine::GetApplication+27 in \\?\C:\Windows\System32\inetsrv\asp.dll from Microsoft Corporation has caused an access violation exception (0xC0000005) when trying to read from memory location 0x00000000 on thread 29 Thread 29 - System ID 6736 Entry point 0x00000000 Create time 1/8/2011 12:46:26 AM Time spent in user mode 0 Days 00:00:00.140 Time spent in kernel mode 0 Days 00:00:00.078 Function Source asp!CActiveScriptEngine::GetApplication+27 vbscript!COleScript::GetDebugApplicationCoreNoRef+2b vbscript!COleScript::FDebuggerEnabled+30 vbscript!COleScript::SetScriptSite+cd asp!CActiveScriptEngine::Init+125 asp!CScriptManager::GetEngine+252 asp!AllocAndLoadEngines+28f asp!ExecuteGlobal+17a asp!Execute+b5 asp!CHitObj::ViperAsyncCallback+3fc asp!CViperAsyncRequest::OnCall+6a comsvcs!CSTAActivityWork::STAActivityWorkHelper+32 ole32!EnterForCallback+f4 ole32!SwitchForCallback+1a8 ole32!PerformCallback+a3 ole32!CObjectContext::InternalContextCallback+15b ole32!CObjectContext::DoCallback+1c comsvcs!CSTAActivityWork::DoWork+12f comsvcs!CSTAThread::DoWork+18 comsvcs!CSTAThread::ProcessQueueWork+37 comsvcs!CSTAThread::WorkerLoop+135 msvcrt!_endthreadex+44 msvcrt!_endthreadex+ce kernel32!BaseThreadInitThunk+e ntdll!__RtlUserThreadStart+70 ntdll!_RtlUserThreadStart+1b BELOW is the faulting module. ASP report Executing ASP requests 0 Request(s) ASP templates cached 0 Template(s) ASP template cache size 0.00 Bytes Loaded ASP applications 1 Application(s) ASP.DLL Version 7.5.7600.16620 ASP application report ASP application metabase key Physical Path Virtual Root Session Count 0 Session(s) Request Count 0 Request(s) Session Timeout 0 minutes(s) Path to Global.asa Server side script debugging enabled False Client side script debugging enabled False Out of process COM servers allowed False Session state turned on False Write buffering turned on False Application restart enabled False Parent paths enabled False ASP Script error messages will be sent to browser False ASP!CACTIVESCRIPTENGINE::GETAPPLICATION+27In w3wp__PID__6656__Date__01_08_2011__Time_01_42_46AM__281__First Chance Access Violation.dmp the assembly instruction at asp!CActiveScriptEngine::GetApplication+27 in \\?\C:\Windows\System32\inetsrv\asp.dll from Microsoft Corporation has caused an access violation exception (0xC0000005) when trying to read from memory location 0x00000000 on thread 29 recent events: server was being brute forced by hackers all of Dec and probably earlier, they weren't able to gain access but did get a virus on and blasted out spam. insatlled AVG and about the 17 or 22 latest patches. after that the app pool started crashing and the server has crashed a couple times since then. I am in no mans land as I am a developer and not a sys admin but I have to assume many roles. So I'm reaching out for help. Sometimes I will see hundreds of these 'C0000005' scriptengine errors in the event log in a matter of seconds and other times just a few times an hour. I googled this line 'ASP!CACTIVESCRIPTENGINE::GETAPPLICATION' and got nothing. Its like the function don't exist or something. I have spent many hours google-ing to no avail and am now turning to the experts on the forums. Thank you for your help

    Read the article

  • Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

    - by Adam Ryczkowski
    Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

    Read the article

  • Suggestions for splitting server roles amongst Hyper-V virtual servers / RAID6 or RAID10? / AppAssure

    - by Anon
    We have 2 Hyper-V hosts at present running 1 virtual server that was converted from a physical box running all roles. My plan is to split the roles over various virtual machines, upgrading to the latest software versions as I go, and use the backup server as a standby in case the main server fails. AppAssure backup software has a feature called Virtual Standby, so the VHD's can be ready to be fired up on the backup server if necessary. Off-site backups will be done via external USB drive for now. I'm just seeking some input/suggestions into how I'm planning to split the roles out amongst various virtual servers. Also, I'm curious how to setup the storage on the servers. We do not have any NAS's, SAN'S or any budget for this. What would the best RAID level be to use? I'm thinking either RAID6 (which is currently used) however I'm concerned about the write speeds, or RAID10 but again I'm worried that I can only lose 1 drive (from the same mirror) as opposed to any 2 with RAID6. I realise I have a hot swap for this, but what if a further drive fails during a rebuild? Is the write penalty of RAID6 worth the extra reliability over RAID10? Or will it be too slow with all the roles I am planning, therefore RAID10 is my only real option? The reason for the needed redundancy is I am the only technician and I'm not always on-site. Options I've considered: 1) 5 drives in RAID6 set, 200gb for host OS, rest for VM storage. 1 drive for hot swap - this is how it is currently setup 2) 4 drives in RAID10 set, 200gb for host OS, rest for VM storage. 2 drives for hot swap 3) 4 drives in RAID10 set for VM storage, 2 drives in RAID1 set for host OS. No drives for hot swap - While this is probably the best option with the amount of drives I have, I don't like the idea of having no hot swap 4) 3 drives in RAID6 set for VM storage, 2 drives in RAID1 set for host OS. 1 drive for hot swap All options give us enough storage capacity for our files, etc. We don't have any budget for extra drives or extra hot swap HD chassis for the servers. We have about 70 clients and about 150 users. MAIN SERVER Intel Xeon 5520 @ 2.27 GHz (2 processors) 16GB RAM 6 x 1TB Seagate Barracuda ES.2 Enterprise SATA drives Intel SRCSATAWB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: DC01 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM DC02 - Active Directory Domain Controller / DNS server / Global catalog - 1GB RAM Member Server - DHCP server, File server, Print server - 1GB RAM SCCM Member Server - 4GB RAM Third Party Software Member Server - A/V server, Ticketing software, etc - 4GB RAM Exchange 2007 - 4GB RAM - however we are probably migrating to a hosted solution, therefore freeing up resources BACKUP SERVER Intel Xeon E5410 @ 2.33GHz (2 processors) 16GB RAM 6 x 2TB WD RE4 SATA drives Intel SRCSASRB RAID controller Virtual machine workload using Hyper-V on Windows Server 2008 R2: AppAssure backup software - 8GB RAM

    Read the article

  • How to get the best LINPACK result and conquer the Top500?

    - by knweiss
    Given a large Linux HPC cluster with hundreds/thousands of nodes. What are your best practices to get the best possible LINPACK benchmark (HPL) result to submit for the Top500 supercomputer list? To give you an idea what kind of answers I would appreciate here are some sub-questions (with links): How to you tune the parameters (N, NB, P, Q, memory-alignment, etc) for the HPL.dat file (without spending too much time trying each possible permutation - esp with large problem sizes N)? Are there any Top500 submission rules to be aware of? What is allowed, what isn't? Which MPI product, which version? Does it make a difference? Any special host order in your MPI machine file? Do you use CPU pinning? How to you configure your interconnect? Which interconnect? Which BLAS package do you use for which CPU model? (Intel MKL, AMD ACML, GotoBLAS2, etc.) How do you prepare for the big run (on all nodes)? Start with small runs on a subset of nodes and then scale up? Is it really necessary to run LINPACK with a big run on all of the nodes (or is extrapolation allowed)? How do you optimize for the latest Intel/AMD CPUs? Hyperthreading? NUMA? Is it worth it to recompile the software stack or do you use precompiled binaries? Which settings? Which compiler optimizations, which compiler? (What about profile-based compilation?) How to get the best result given only a limited amount of time to do the benchmark run? (You can block a huge cluster forever) How do you prepare the individual nodes (stopping system daemons, freeing memory, etc)? How do you deal with hardware faults (ruining a huge run)? Are there any must-read documents or websites about this topic? E.g. I would love to hear about some background stories of some of the current Top500 systems and how they did their LINPACK benchmark. I deliberately don't want to mention concrete hardware details or discuss hardware recommendations because I don't want to limit the answers. However, feel free to mention hints e.g. for specific CPU models.

    Read the article

  • What the best way to recover from when your RAID H/W incorrectly thinks a disk is missing

    - by Software Monkey
    I have a Windows 7 system with an MSI motherboard (running the latest AMD BIOS) and two of my four disks (not the system boot disk) configured via the Mobo as RAID-1. After a normal system restart today, the RAID BIOS reports that one of the two drives has been disconnected or has failed. It's not really failed; via recovery tools I can verify that if I take the BIOS out of RAID mode. But I can find no way to re-add the second hard disk to the array and rebuild via the BIOS - the only option seems be to delete the array and recreate it, but I've done that once before and it blows away the disk. It's done this once before, however on a subsequent reboot after double-checking the drive cabling (but not changing anything) and it boot up fine. So I think the mobo RAID is a little bit flaky. At this point I would like to remove the RAID drivers, change to AHCI mode and switch over to using a Windows 7 dynamic mirror disk. But the RAID drivers seem somehow deeply bound into the Windows startup - I can't find anything like the good ol' safe-mode in Windows 7. If I boot from the Win 7 install disk in ACHI mode I can use recovery tools to log in to the Windows 7 installation, so the boot drive it seems fine with ACHI mode. Additionally, I can see all my other disks, run chkdsk on them and they seem to be fine. If I try to boot from the HDD in AHCI mode, it just reboots part way through, presumably because the RAID drivers load and conflict with the BIOS being set to AHCI. So: How do I strip the RAID drivers from my Win 7 installation? If I delete the RAID logical disk, will it really delete partitioning information, or is that just a poorly worded message when it says the data on the disk will be deleted? If I disconnect the 2 disks in a RAID array, then delete the logical disk array, and then reconnect and reboot still in RAID mode, will the disks simply revert to RAID single-disks like my other 2 and then maybe I can leave windows with RAID drivers by operate the disks as singles with 2 of them in a Windows dynamic disk mirrored setup? Does Windows 7 have anything like the Windows XP Repair Install, where it will reinstall the O/S binaries from CD, but leave apps and setup alone. I am really hoping I don't have to do a complete reinstall of Windows 7 - the last one, when I upgraded from XP, took me two days to get everything set up and installed.

    Read the article

  • File copying software to do this kind of work... in Windows 7 32 bit

    - by Senthil
    I need a software (Windows 7 32bit) to help me in this process: I have my documents, music, video clips, movies, pictures in my hard disk. These will not be scattered around the system. But will be inside C:\Senthil\ At the end of every week, I want to plug in an external hard disk and run a software that should make sure whatever is inside C:\Senthil\ is also present in the external disk. Files deleted from C:\Senthil\ should be deleted there, and new files should be copied etc... at the end of the process, every bit inside the source folder in my internal disk should be inside my external disk. A couple of important requirements and points: I do NOT need multiple versions or historic versions. I don't need the previous versions of my files. I only want the latest copy to be present in my "backup". Incremental backup makes sense. If files were not touched since the last backup, it need not copy. The size of my folder will run into GBs and in a year or two will go into TBs. But I will make sure the size of the external HDD is equal to or bigger than my source folder. I do not want it to run automatically because when I accidentally delete a file in my source, it will delete the one in the backup (I know this is why we have versioning facilities). I just want to be able to run it manually so that I am in control of when the backup is made and what is backed up and I should be able to pick something from the backup and restore it to the source folder in the above situation. Is there any software that will let me do exactly this? I don't want any other "smart" facility of the software to interfere with this process. I know what I want and the software can keep its smartness to itself :D The main reason I am asking this question is, I am a software developer and I can write this software myself. But I am a little constrained by time at the moment and I want to know if there is an existing program that can do this. Kindly don't worry about earthquakes or fire or snowstorms and bring up the "in case of a natural disaster your backup will also be in the damage zone and will be lost" argument because: I will have bigger things to worry about than my holiday memories. I don't think I will digitally store any life-ruining documents. This backup is only to avoid the inconvenience of obtaining a new copy of stuff that I have. Not to protect them against the end of the world. I am more worried about power surges in my area frying my system, hard disk failure, children who merrily hit Delete or teens who hit Shift + Delete or myself getting a little careless at times! In short: Is there a file/folder syncing software that listens to what I say and doesn't try to act smart? Please forgive me if I sound arrogant :)

    Read the article

  • How to generate build no with SVN revision no & Maven buildNumber plugin

    - by Binit jha
    I am using mvn buildNumber plugin to generate build no with latest svn revision no. But, our version is not resolve to ${buildNumber} in the duration of installing in .m2 local reposotry. here is the our pom details: <modelVersion>4.0.0</modelVersion> <groupId>com.hp.cloudprint</groupId> <artifactId>testutils</artifactId> <name>testutils</name> <version>6.3.rel.${buildNumber}</version> <description>This jar contains some helper classes which can simplify the writing of JUnit test cases.</description> <dependencies> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>buildnumber-maven-plugin</artifactId> <executions> <execution> <id>useLastCommittedRevision</id> <phase>validate</phase> <goals> <goal>create</goal> </goals> </execution> </executions> <configuration> <doCheck>false</doCheck> <doUpdate>true</doUpdate> <getRevisionOnlyOnce>true</getRevisionOnlyOnce> </configuration> </plugin> <scm> <connection>scm:svn:https://acn-platform</connection> <developerConnection>scm:svn:https://abc-platform/trunk</developerConnection> </scm>. </project> Building jar: C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar [INFO] [install:install] [INFO] Installing C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar to C:\Documents and Settings\jhab.m2*\repository\com\hp\cloudprint\testutils\6.3.rel.${buildNumber}\testutils-6.3.rel.${buildNumber}.jar** [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL Target generated correct jar. testutil-6.3.rel.2297.jar* Thanks in advance Binit

    Read the article

  • Gigabyte GA-Z77X-D3H MB problems

    - by Hans
    I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

    Read the article

  • How to generate build no with SVN revision no & Maven buildNumber plugin.

    - by Binit jha
    Hi, I am using mvn buildNumber plugin to generate build no with latest svn revision no. But, our version is not resolve to ${buildNumber} in the duration of installing in .m2 local reposotry. here is the our pom details: <modelVersion>4.0.0</modelVersion> <groupId>com.hp.cloudprint</groupId> <artifactId>testutils</artifactId> <name>testutils</name> <version>6.3.rel.${buildNumber}</version> <description>This jar contains some helper classes which can simplify the writing of JUnit test cases.</description> <dependencies> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>buildnumber-maven-plugin</artifactId> <executions> <execution> <id>useLastCommittedRevision</id> <phase>validate</phase> <goals> <goal>create</goal> </goals> </execution> </executions> <configuration> <doCheck>false</doCheck> <doUpdate>true</doUpdate> <getRevisionOnlyOnce>true</getRevisionOnlyOnce> </configuration> </plugin> <scm> <connection>scm:svn:https://acn-platform</connection> <developerConnection>scm:svn:https://abc-platform/trunk</developerConnection> </scm>. </project> Building jar: C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar [INFO] [install:install] [INFO] Installing C:\Documents and Settings\hpadmin\workspace\testutils\target\testutils-6.3.rel.2930.jar to C:\Documents and Settings\jhab.m2*\repository\com\hp\cloudprint\testutils\6.3.rel.${buildNumber}\testutils-6.3.rel.${buildNumber}.jar** [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESSFUL Target generated correct jar. testutil-6.3.rel.2297.jar* Thanks in advance Binit

    Read the article

  • Upgrading php from php 5.3 to 5.4 .7

    - by Takingsides
    So, quickly so to speak I have noticed this topic around, I have searched and there are plenty of solutions. However these solutions do not work for me, not only that but I'm intending to learn more about the Debian based OS. Questions I would like to know how to upgrade php5.3 to php 5.4.7 compiling it from source, myself without using a third-party ppa. Is the way (explained below) the correct way of configuring php5.4? I'm new to compiling from source. Set-up I run Ubuntu Server 12.04 64bit. I've currently got: PHP 5.3 MySQL-Server Apache2 Memcached The Problem So I initially installed php5.3 using apt-get. I now wish to upgrade the php 5.4 due to the advantage of traits in OOP and the struct with Arrays and all the other recent patches and such. Possible Solutions I've seen this ondrej/ppa repository, which I refuse to use, given the fact that it may work, but it's an unknown/untrusted source. ALso, i'm not learning how to administer from source, using configure, make and install accordingly. I've seen a solution compiling from source, which is essentially how I was hoping to go about it with some guidance. Conclusion So I didn't just expect to be spoon-fed, and I went out and did some manual reading and atleast started the ball rolling myself; this how far i've got. The first thing I did was su into root (to save the typing sudo all the darn time). $ sudo su The next thing I did was download the latest version of php (5.4.7) and extracted it's contents ready to configure before installing it. $ mkdir php5-new && cd !$ $ wget -O php-5.4.7.tar.bz2 http://php.net/get/php-5.4.7.tar.bz2/from/uk3.php.net/mirror $ bzip2 -d php-5.4.7.tar.bz2 $ tar xvf php-5.4.7.tar.gz $ cd php-5.4.7 $ ./configure --help Finally I decided to have a bash, I looked through the list of options and decided I needed to list ALL of the things I wanted to include in the configuration. $ ./configure --with-mysql --with-apache2 --with-libxml --with-openssl --with-zlib --with-bz2 --with-curl --with-dom --with-gd --with-imap --with-imap-ssl --with-mcrypt --with-mysqli --with-pdo-mysql --with-libxml --enable-ftp --enable-mbstring --enable-soap Finally, the results... When the configuration process had finished, it threw an error: configure: error: xml2-config not found. Please check your libxml2 installation.

    Read the article

  • How did what appears to be a virus get on my computer? (explanation of situation enclosed)

    - by Massimo
    My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

    Read the article

  • Unable to boot from LiveCD/USB and even Super Grub Disk!

    - by Reuben L.
    Hi all, I'm in a fix. Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition. I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot. However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess. At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond. Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference. Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option. Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery! I've tried using the command prompt utility at startup recovery but to no avail. Anyone can help me with this?

    Read the article

  • VIM "upgraded" to expandtab and tabstop=8 on Python files

    - by dotancohen
    After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

    Read the article

  • Alienware m15x (older model) BSOD investigation

    - by Crishu
    A frined of mine asked me to help him with an Alienware m15x laptop that had a little service history. It was bought in june 2008, serviced in january 2009 for a random fps drop problem, Alienware returned it saying nothing was wrong. The laptop still had hiccups, but after juggling a few drivers and settings, the fps drops weren't as noticeable. Eventually it died in Sept. 2009. It would not boot up locking itself on a white/gray screen. (i think it was overheating .. clocking in 100 degrees Celsius). So back to Alienware it went. They replaced the GPU and all was fine. Up until these blue screens started showing up. One other thing that was updated was the HDD and a Windows 7 reinstall, in August. From then on it seems to have started its BSOD. Could this be the culprit? Why? 0_o The original Windows was Vista but it was upgraded with a digital download/purchase of Windows 7 Home Premium and activated after installing windows. No errors on the old HDD, just on the latest installation. LE:Due note that now the old HDD is used to see if issues re-occur. So please, I am in need of someone who can interpret these windows dump files: Minidump I may have come to some conflicting conclusions. So if someone can clarify each dump/date and the probable cause/error it had; and a final conclusion or solution, we would be very grateful. Also please consult report for other system info I omitted: same link,code: XRWIVLWG If I missed something or if you have any other questions I'll be happy to answer them. Thank you. Good day. Processor: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz Network Adapter Properties: Broadcom NetLink (TM) Gigabit Ethernet Intel(R) Wireless WiFi Link 4965AGN Video Adapter Properties: Driver Description NVIDIA GeForce 8800M GTX Driver Date 19.08.2009 Driver Version 8.16.11.8681 Driver Provider NVIDIA INF File oem19.inf Hardware ID PCI\VEN_10DE&DEV_060C&SUBSYS_0770152D&REV_A2 Location Information @system32\DRIVERS\pci.sys,#65536;PCI bus %1, device %2, function %3;(1,0,0) PCI Device NVIDIA GeForce 8800M GTX [NoDB] BIOS String Version 62.92.34.0.8 Installed Drivers nvd3dum (8.16.11.8681), nvwgf2um, nvwgf2um Hard Dik Drive: Model ID ST9120823ASG (**older one 120gb**) Model ID WD32000BEKT (new 320gb with fresh OS)

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

  • A gigabit network interface is CPU-limited to 25MB/s. How can I maximize the throughput?

    - by netvope
    I have a Acer Aspire R1600-U910H with a nForce gigabit network adapter. The maximum TCP throughput of it is about 25MB/s, and apparently it is limited by the single core Intel Atom 230; when the maximum throughput is reached, the CPU usage is about 50%-60%, which corresponds to full utilization considering this is a Hyper-threading enabled CPU. The same problem occurs on both Windows XP and on Ubuntu 8.04. On Windows, I have installed the latest nForce chipset driver, disabled power saving features, and enabled checksum offload. On Linux, the default driver has checksum offload enabled. There is no Linux driver available on Nvidia's website. ethtool -k eth0 shows that checksum offload is enabled: Offload parameters for eth0: rx-checksumming: on tx-checksumming: on scatter-gather: on tcp segmentation offload: on udp fragmentation offload: off generic segmentation offload: off The following is the output of powertop when the network is idle: Wakeups-from-idle per second : 61.9 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 90.9% (101.3) <interrupt> : eth0 4.5% ( 5.0) iftop : schedule_timeout (process_timeout) 1.8% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.9% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.5% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) And when the maximum throughput of about 25MB/s is reached: Wakeups-from-idle per second : 11175.5 interval: 10.0s no ACPI power usage estimate available Top causes for wakeups: 99.9% (22097.4) <interrupt> : eth0 0.0% ( 5.0) iftop : schedule_timeout (process_timeout) 0.0% ( 2.0) <kernel core> : clocksource_register (clocksource_watchdog) 0.0% ( 1.0) dhcdbd : schedule_timeout (process_timeout) 0.0% ( 0.6) <kernel core> : neigh_table_init_no_netlink (neigh_periodic_timer) Notice the 20000 interrupts per second. Could this be the cause for the high CPU usage and low throughput? If so, how can I improve the situation? As a reference, the other computers in the network can usually transfer at 50+MB/s without problems. A computer with a Core 2 CPU generates only 5000 interrupts per second when it's transferring at 110MB/s. The number of interrupts is about 20 times less than the Atom system (if interrupts scale linearly with throughput.) And a minor question: How can I find out what is the driver in use for eth0?

    Read the article

  • How to remove RAID flag on unstriped drive without losing data?

    - by Alex Folland
    I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

    Read the article

  • Galera install failure on Fedora 18

    - by ehime
    I've been trying to reinstall MariaDB and have been encountering multiple issues, $ yum install Mariadb-Galera-server Error: Package: MariaDB-Galera-server-5.5.29-1.i386 (mariadb) Requires: galera Available: galera-23.2.4-1.rhel5.i386 (mariadb) galera galera = 23.2.4-1.rhel5 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest there is a requirement that libssl.so.6 and libcrypto.ssl.6 are installed, these DO show up in my /lib64 and /lib though as linked items. /usr/lib -rwxr-xr-x 1 root root 1356700 Nov 23 2010 libcrypto.so.0.9.8e lrwxrwxrwx 1 root root 19 Jun 28 12:03 libcrypto.so.6 -> libcrypto.so.0.9.8e -rwxr-xr-x. 1 root root 394272 Mar 18 14:22 libssl.so.1.0.1e lrwxrwxrwx 1 root root 16 Jun 28 12:03 libssl.so.6 -> libssl.so.0.9.8e /usr/lib64 -rwxr-xr-x 1 root root 1849680 Mar 18 14:21 libcrypto.so.1.0.1e lrwxrwxrwx 1 root root 26 Jun 28 11:54 libcrypto.so.6 -> /lib64/libcrypto.so.1.0.1e -rwxr-xr-x 1 root root 421712 Mar 18 14:21 libssl.so.1.0.1e lrwxrwxrwx 1 root root 23 Jun 28 11:54 libssl.so.6 -> /lib64/libssl.so.1.0.1e So the deps SHOULD be met, trying to $ yum install galera returns this Resolving Dependencies --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Restarting Dependency Resolution with new changes. --> Running transaction check ---> Package galera.i386 0:23.2.4-1.rhel5 will be installed --> Finished Dependency Resolution No errors? but no install either .... ? lets try wget and rpm'ing the package instead I guess? $ wget https://launchpad.net/galera/2.x/23.2.4/+download/galera-23.2.4-1.rhel5.x86_64.rpm $ rpm -ivh galera-23.2.4-1.rhel5.x86_64.rpm This issues the dreaded error: Failed dependencies: libcrypto.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 libssl.so.6()(64bit) is needed by galera-23.2.4-1.rhel5.x86_64 But we saw above these packages are here =( Whats going on?? Is openssl not installed? $ yum install openssl Loaded plugins: langpacks, presto, refresh-packagekit Package 1:openssl-1.0.1e-4.fc18.x86_64 already installed and latest version Nothing to do Its there.... ??? wth Fedora?

    Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >