Search Results

Search found 7962 results on 319 pages for 'social enterprise'.

Page 302/319 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• WDS DHCP same server on Windows Server 2008

  - by Richard

  I have been struggling with a problem on my Windows Server 2008 for the past 4 - 5 hours and cannot figure out whats wrong. I have tried pretty much everything that I found on google and all the links are purple. Hopefully you guys can help me. I am running a Windows Server 2008 Standard edition with the latest updates as of today. Furthermore I am running a Windows Server 2003. Both are virtual machines on my ESXi 5 server. My network is: 192.168.10.0/24 W2k8: 192.168.10.251 is the PDC running ADS, DHCP and WDS W2k3: 192.168.10.253 AND 192.168.1.175 running Routing and Remote Access and ISA 2006 Enterprise In my internal network (192.168.10.0/24) I have my client machine (192.168.10.10) that runs a VMWare Workstation. I am trying to deploy Windows 7 Home Premium to a virtual machine on my VMWorkstation via PXE. I have set the Workstation's VM network adapter to "bridged" so that it uses the physical network adapter and is connected to my internal network. The DHCP pool is configured to give IP addresses from 192.168.10.10-192.168.10.15 (works for normal clients and is not used up) When I start my VM with the PXE I get the error: PXE-E52:proxyDHCP offers were received. No DHCP offers were received Apperently this means "that means that WDS responded but the DHCP server did not." People suggested to direct the traffic to both WDS and DHCP on the router, since everything is on the same subnet there is no need for that as the broadcast is seen by everyone (WDS and DHCP) No reservation for the virtual mac addrs is made on the DHCP. Furthermore it was suggested to configure the DHCP options: Option 60= PXEClient Option 66= WDS server name or IP address Option 67= Boot file name However, this is not recommended by Microsoft, I tried it and it did not solve my problem. The configuration on the WDS (My System is German therefore the actual naming might be different): PXE response tab: PXE responses is set to "ALL (known and unknown)" DHCP Tab: Do not listen to port 67 is NOT ticked - if I tick this I do not get any responses and the PXE errors gets PXE-E51 that neither DHCP or proxyDHCP were received DHCP-Option 60 for "PXEClient" is ticked The confusing part here is that it is advised in the tab to tick the first option since it is on the same server. Network Configuration Tab: Use the following IP-Address range for Multicast-IP-Address: 224.0.1.0 - 224.0.10.0 Thats not the default one, however it is in the allowed range. The UDP port range is the default since it is not advised to change them. I tried to change the "networkprofile" from 100mbits/1gbits and custom. I am running a 1gbit network with CAT6 cables and 1gbit netgear switch 5 ports. Everything is configured to use 1gbit. The WDS is authorised for the DHCP server. My ISA 2006 configuration: For the internal networking i have configured the following policy array: Allow protocols on internal network including the w2k3 host: 67,68,53,ICMP, 4011 UDP receive, 64001-6500 UDP send receive, 69 UDP send Routing and Remote Access I tried the DHCP relay agent configuration that was suggested as well, but that did not work I would highly appreciate anykind of help because I am pretty much done here with my nerves. Thank you very much in advance.

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Strange enduser experience with Liferay, Glassfish and Apache on RedHat

  - by Pete Helgren

  Tried multiple forums to get to the bottom of this. I hope I can get some direction here: Here is the stack I am working with: Red Hat Enterprise Linux Server release 5.6 (Tikanga) Liferay 6.0.6 on Glassfish 3.0.1 MySQL 5.0.77 Apache 2.2.3 The Liferay portal provides a variety of portlets to end users. Static content (web pages), static resources (primarily pdf and mp3 files 1mb - 80mb in size), File upload and download capabilities (primarily 40-60mb mp3 files) and online streaming of those MP3 files. Here is the strange end user experiences: Under normal load: (20-30) users uploading, downloading or streaming files and 20-30 accessing static content (some of it downloads), we see the following: 1) Clicking a link triggers the download of a portion of an MP3 (the portion is a few seconds long). 2) Clicking on a link tiggers the download of the page content rather than rendering. 3) Clicking a link causes the page to dump binary data to the end user rather than the expected content. 4) Clicking a link returns the text of a javascript file rather than rendering the page. Each occurrence is totally random (or appears so). Sometimes it works, sometimes it doesn't. It seems to have no relation to browser or client OS. The strange events seem to occur much more frequently when using an SSL connection rather than regular http. Apache serves as a proxy server only (reverse). It basically passes all the requests through to Glassfish. There isn't any static content proxy served by Apache. We rebuilt the entire stack from scratch and redeployed the portlet wars and still have the same issues. Liferay is running as a single server (not clustered). We disabled mod_cache in Apache. The problems are more frequent as the server load grows. This morning the load is pretty light and we are seeing few problems but the use of the site will grow, particularly tonight around 9pm CST through Wednesday morning. You could try the site (http://preview.bsfinternational.org) during those times and I would expect that you might experience one of the weirdnesses as you randomly click links on the site (https is invoked only when signed in). Again, https seems to exacerbate the issue. This seems very much like a caching issue but I don't know where in the stack to start peeling the onion. Apache? Liferay? Glassfish? MySQL? Maybe even Redhat? We are stumped and most forums we have posted to (LifeRay and Glassfish) have returned very few suggestions. I just need an idea of where to start looking. I understand that we could have a portlet EDIT: Opening the files in a Hex editor that appear to be pages that download rather than render, we see that the first 4000 characters are "junk" and then the "HTTP/1.1 ...." 'normal' header is seen. So something is dumping a jumble of characters up to offset 4000 (when viewing it in a Hex editor). Perhaps a clue? Ideas?

  Read the article

• Strange Upload Problem on Hyper-V

  - by Ring0

  Hi, This one is driving me totally nuts. I have being trying to upload a file to www.virustotal.com (its a harmless exe I have since found out - DiskWipe.exe from diskwipe.org). Using IE8. From Win 7 and Win 2008 R2 Datacenter (which I select to boot from vhd's) onto my main machine hardware, and also on another Win 7 PC elsewhere on my network, when I upload the file to virustotal.com it works perfectly. So, using my native NIC's everything is fine. Using another machine also perfect. Right. OK, from my boot menu the default is my main development machine - the one I'm typing on now. This runs on the metal and has Hyper-V role and I have some guests. All guests are not running. Amazingly, from my console (root partition to be exact) or any guest OS 2003 /XP / 2008 R2 etc. My upload to virustotal.com slows at 32% then HANGS at 38.something% & never finishes!! Here is the kicker. I have another box (my main server) running Hyper-V on the metal and three live guests. Identical H/W to my main dev machine in another room. (Except OS is Datacenter - Mine is Enterprise). If I try and upload from its bare metal console or any guest this file to virustotal.com using IE8 it stops exactly in the same place!! As for "steps I have tried etc." are kind-of blown out of the water as my server box is doing the precise same thing as the machine in my room here. OK, comonalities: Mobo: Gigabyte GA-X58-UD5, 12GB Kingston RAM, Corei7 920 4 cores hyperthreading = 8 & Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC's. All 3 machines have this same motherboard - revision F11 Bios, all have 12GB RAM, all have the Realtek Nic's. All x64 by the way as I mentioned before I have a Win 7 box also with the UD5 m/Board, 12 GB RAM - bit of an overkill. :-) All these machines when NOT running Hyper-V can upload this file. Perhaps you may like to try it on a Hyepr-v (2008 R2) yourselves with IE8 and the desktop experience is on. See if it works or fails for you. Root OS or any guest. So, looking like its the NIC + Hyper-V = Cannot upload this file (any file I must add.) Realtek Nic is Ver 7.002.1125.2008. Using IE8 I see in the nic settings there are the usual parameters for Jumbo frames / Checksum offloading etc. several others. Should I fiddle with these? I ran Netmon 3.3 in a guest and the TCP session halted as the upload failed. I suppose I could study that further. I dont have Netmon on the root partition machine (yet)! All OS's fully patched - including todays defender files. My box running Office 2007 - but identical server in another room is not. Also, if I fire up a VPN to a distant client and do the upload it works! Of course its a different network path. Suggestions welcome please. If I left out anything important - please yell at me. Many Thanks,

  Read the article

• redhat Apache fast-cgi selinux permissions

  - by Alejo JM

  My apache installation is running php as fastcgi, and the virtual hosts are pointing to /home/*/public_html. and the fastcgi are home/*/cgi-bin/php.fcgi the public_html setup with selinux was: /usr/sbin/setsebool -P httpd_enable_homedirs 1 chcon -R -t httpd_sys_content_t /home/someuser/public_html The owner and group are the user, for example the user "someuser": ls -all /home/someuser/cgi-bin/ drwxr-xr-x 2 someuser someuser 4096 Sep 7 13:14 . drwx--x--x 6 someuser someuser 4096 Sep 6 18:17 .. -rwxr-xr-x 1 someuser someuser 308 Sep 7 13:14 php.fcgi ls -all /home/someuser/public_html/ | greep info.php -rw-r--r-- 1 someuser someuser 24 Sep 3 16:24 info.php When is visits the site I get "Forbidden ..." and the log said: [Fri Sep 07 12:02:51 2012] [error] [client x.x.x.x] (13)Permission denied: access to /cgi-bin/php.fcgi/info.php denied My selinux conf is: SELINUX=enforcing SELINUXTYPE=targeted SETLOCALDEFS=0 So I kill Selinux (SELINUX=disabled), reboot the system and everything works !!!!! The problem is Selinux, I don't want disable Selinux. I trying this with no success: setsebool -P httpd_enable_cgi 1 chcon -t httpd_sys_script_exec_t /home/someuser/cgi-bin/php.fcgi chcon -R -t httpd_sys_content_t /home/someuser/cgi-bin Or maybe is better change Selinux SELINUX=enforcing to SELINUX=permissive And disable selinux for httpd ? (I think I better find the correct configuration) Thanks for any suggestion on this matter My environment: Red Hat Enterprise Linux Server release 5.8 (Tikanga) Server version: Apache/2.2.3 PHP 5.1.6 (cli) (built: Jun 22 2012 06:20:25) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.1.0, Copyright (c) 1998-2006 Zend Technologies Some logs: ps -ZC httpd LABEL PID TTY TIME CMD system_u:system_r:httpd_t 2822 ? 00:00:00 httpd system_u:system_r:httpd_t 2823 ? 00:00:00 httpd system_u:system_r:httpd_t 2824 ? 00:00:00 httpd system_u:system_r:httpd_t 2825 ? 00:00:00 httpd system_u:system_r:httpd_t 2826 ? 00:00:00 httpd system_u:system_r:httpd_t 2836 ? 00:00:00 httpd system_u:system_r:httpd_t 2837 ? 00:00:00 httpd system_u:system_r:httpd_t 2838 ? 00:00:00 httpd system_u:system_r:httpd_t 2839 ? 00:00:00 httpd system_u:system_r:httpd_t 2840 ? 00:00:00 httpd getsebool -a | grep httpd allow_httpd_anon_write --> off allow_httpd_bugzilla_script_anon_write --> off allow_httpd_cvs_script_anon_write --> off allow_httpd_mod_auth_pam --> off allow_httpd_nagios_script_anon_write --> off allow_httpd_prewikka_script_anon_write --> off allow_httpd_squid_script_anon_write --> off allow_httpd_sys_script_anon_write --> off httpd_builtin_scripting --> on httpd_can_network_connect --> off httpd_can_network_connect_db --> off httpd_can_network_relay --> off httpd_can_sendmail --> on httpd_disable_trans --> off httpd_enable_cgi --> on httpd_enable_ftp_server --> off httpd_enable_homedirs --> on httpd_execmem --> off httpd_read_user_content --> off httpd_rotatelogs_disable_trans --> off httpd_setrlimit --> off httpd_ssi_exec --> off httpd_suexec_disable_trans --> off httpd_tty_comm --> on httpd_unified --> on httpd_use_cifs --> off httpd_use_nfs --> off

  Read the article

• OS Missing? Messed up the MBR on Win7 64-bit

  - by hom3lesshom3boy

  I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

  - by Tegeril

  Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

  Read the article

• JBoss 6 deployment of message-driven bean error

  - by AntonioP

  Hello, I have an java EE application which has one message-driven bean and it runs fine on JBoss 4, however when I configure the project for JBoss 6 and deploy on it, I get this error; WARN [org.jboss.ejb.deployers.EjbDeployer.verifier] EJB spec violation: ... The message driven bean must declare one onMessage() method. ... org.jboss.deployers.spi.DeploymentException: Verification of Enterprise Beans failed, see above for error messages. But my bean HAS the onMessage method! It would not have worked on jboss 4 either then. Why do I get this error!? Edit: The class in question looks like this package ... imports ... public class MyMDB implements MessageDrivenBean, MessageListener { AnotherSessionBean a; OneMoreSessionBean b; public MyMDB() {} public void onMessage(Message message) { if (message instanceof TextMessage) { try { //Lookup sessionBeans by jndi, create them lookupABean(); // check message-type, then invokie a.handle(message); // else b.handle(message); } catch (SomeException e) { //handling it } } } public void lookupABean() { try { // code to lookup session beans and create. } catch (CreateException e) { // handling it and catching NamingException too } } } Edit 2: And this is the jboss.xml relevant parts <message-driven> <ejb-name>MyMDB</ejb-name> <destination-jndi-name>topic/A_Topic</destination-jndi-name> <local-jndi-name>A_Topic</local-jndi-name> <mdb-user>user</mdb-user> <mdb-passwd>pass</mdb-passwd> <mdb-client-id>MyMessageBean</mdb-client-id> <mdb-subscription-id>subid</mdb-subscription-id> <resource-ref> <res-ref-name>jms/TopicFactory</res-ref-name> <jndi-name>jms/TopicFactory</jndi-name> </resource-ref> </message-driven>

  Read the article

• Need Help Setting an Image with Transparent Background to Clipboard

  - by AMissico

  I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Basically, I need a "second set of eyes" to look over the following code. (The complete working project at ftp://missico.net/ImageVisualizer.zip.) This is an image Debug Visualizer class library, but I made the included project to run as an executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open the screen capture with an image editor, and then deleting the background added because it was a screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far. I pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. Do I need to use BITMAPV5HEADER and CreateDIBitmap? Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

  Read the article

• Why is code quality not popular?

  - by Peter Kofler

  I like my code being in order, i.e. properly formatted, readable, designed, tested, checked for bugs, etc. In fact I am fanatic about it. (Maybe even more than fanatic...) But in my experience actions helping code quality are hardly implemented. (By code quality I mean the quality of the code you produce day to day. The whole topic of software quality with development processes and such is much broader and not the scope of this question.) Code quality does not seem popular. Some examples from my experience include Probably every Java developer knows JUnit, almost all languages implement xUnit frameworks, but in all companies I know, only very few proper unit tests existed (if at all). I know that it's not always possible to write unit tests due to technical limitations or pressing deadlines, but in the cases I saw, unit testing would have been an option. If a developer wanted to write some tests for his/her new code, he/she could do so. My conclusion is that developers do not want to write tests. Static code analysis is often played around in small projects, but not really used to enforce coding conventions or find possible errors in enterprise projects. Usually even compiler warnings like potential null pointer access are ignored. Conference speakers and magazines would talk a lot about EJB3.1, OSGI, Cloud and other new technologies, but hardly about new testing technologies or tools, new static code analysis approaches (e.g. SAT solving), development processes helping to maintain higher quality, how some nasty beast of legacy code was brought under test, ... (I did not attend many conferences and it propably looks different for conferences on agile topics, as unit testing and CI and such has a higer value there.) So why is code quality so unpopular/considered boring? EDIT: Thank your for your answers. Most of them concern unit testing (and has been discussed in a related question). But there are lots of other things that can be used to keep code quality high (see related question). Even if you are not able to use unit tests, you could use a daily build, add some static code analysis to your IDE or development process, try pair programming or enforce reviews of critical code.

  Read the article

• C# Monte Carlo Incremental Risk Calculation optimisation, random numbers, parallel execution

  - by m3ntat

  My current task is to optimise a Monte Carlo Simulation that calculates Capital Adequacy figures by region for a set of Obligors. It is running about 10 x too slow for where it will need to be in production and number or daily runs required. Additionally the granularity of the result figures will need to be improved down to desk possibly book level at some stage, the code I've been given is basically a prototype which is used by business units in a semi production capacity. The application is currently single threaded so I'll need to make it multi-threaded, may look at System.Threading.ThreadPool or the Microsoft Parallel Extensions library but I'm constrained to .NET 2 on the server at this bank so I may have to consider this guy's port, http://www.codeproject.com/KB/cs/aforge_parallel.aspx. I am trying my best to get them to upgrade to .NET 3.5 SP1 but it's a major exercise in an organisation of this size and might not be possible in my contract time frames. I've profiled the application using the trial of dotTrace (http://www.jetbrains.com/profiler). What other good profilers exist? Free ones? A lot of the execution time is spent generating uniform random numbers and then translating this to a normally distributed random number. They are using a C# Mersenne twister implementation. I am not sure where they got it or if it's the best way to go about this (or best implementation) to generate the uniform random numbers. Then this is translated to a normally distributed version for use in the calculation (I haven't delved into the translation code yet). Also what is the experience using the following? http://quantlib.org http://www.qlnet.org (C# port of quantlib) or http://www.boost.org Any alternatives you know of? I'm a C# developer so would prefer C#, but a wrapper to C++ shouldn't be a problem, should it? Maybe even faster leveraging the C++ implementations. I am thinking some of these libraries will have the fastest method to directly generate normally distributed random numbers, without the translation step. Also they may have some other functions that will be helpful in the subsequent calculations. Also the computer this is on is a quad core Opteron 275, 8 GB memory but Windows Server 2003 Enterprise 32 bit. Should I advise them to upgrade to a 64 bit OS? Any links to articles supporting this decision would really be appreciated. Anyway, any advice and help you may have is really appreciated.

  Read the article

• WCF client encrypt message to JAVA WS using username_token with message protection client policy

  - by Alex

  I am trying to create a WCF client APP that is consuming a JAVA WS that uses username_token with message protection client policy. There is a private key that is installed on the server and a public certificate file was exported from the JKS keystore file. I have installed the public key into certificate store via MMC under Personal certificates. I am trying to create a binding that will encrypt the message and pass the username as part of the payload. I have been researching and trying the different configurations for about a day now. I found a similar situation on the msdn forum: http://social.msdn.microsoft.com/Forums/en/wcf/thread/ce4b1bf5-8357-4e15-beb7-2e71b27d7415 This is the configuration that I am using in my app.config <customBinding> <binding name="certbinding"> <security authenticationMode="UserNameOverTransport"> <secureConversationBootstrap /> </security> <httpsTransport requireClientCertificate="true" /> </binding> </customBinding> <endpoint address="https://localhost:8443/ZZZService?wsdl" binding="customBinding" bindingConfiguration="cbinding" contract="XXX.YYYPortType" name="ServiceEndPointCfg" /> And this is the client code that I am using: EndpointAddress endpointAddress = new EndpointAddress(url + "?wsdl"); P6.WCF.Project.ProjectPortTypeClient proxy = new P6.WCF.Project.ProjectPortTypeClient("ServiceEndPointCfg", endpointAddress); proxy.ClientCredentials.UserName.UserName = UserName; proxy.ClientCredentials.ClientCertificate.SetCertificate(StoreLocation.CurrentUser, StoreName.My, X509FindType.FindByThumbprint, "67 87 ba 28 80 a6 27 f8 01 a6 53 2f 4a 43 3b 47 3e 88 5a c1"); var projects = proxy.ReadProjects(readProjects); This is the .NET CLient error I get: Error Log: Invalid security information. On the Java WS side I trace the log : SEVERE: Encryption is enabled but there is no encrypted key in the request. I traced the SOAP headers and payload and did confirm the encrypted key is not there. Headers: {expect=[100-continue], content-type=[text/xml; charset=utf-8], connection=[Keep-Alive], host=[localhost:8443], Content-Length=[731], vsdebuggercausalitydata=[uIDPo6hC1kng3ehImoceZNpAjXsAAAAAUBpXWdHrtkSTXPWB7oOvGZwi7MLEYUZKuRTz1XkJ3soACQAA], SOAPAction=[""], Content-Type=[text/xml; charset=utf-8]} Payload: <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"><s:Header><o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><o:UsernameToken u:Id="uuid-5809743b-d6e1-41a3-bc7c-66eba0a00998-1"><o:Username>admin</o:Username><o:Password>admin</o:Password></o:UsernameToken></o:Security></s:Header><s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><ReadProjects xmlns="http://xmlns.dev.com/WS/Project/V1"><Field>ObjectId</Field><Filter>Id='WS-Demo'</Filter></ReadProjects></s:Body></s:Envelope> I have also tryed some other bindings but with no success: <basicHttpBinding> <binding name="basicHttp"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="Certificate"/> </security> </binding> </basicHttpBinding> <wsHttpBinding> <binding name="wsBinding"> <security mode="Message"> <message clientCredentialType="UserName" negotiateServiceCredential="false" /> </security> </binding> </wsHttpBinding> Your help will be greatly aprreciatted! Thanks!

  Read the article

• What Is The Best Database For Delphi Desktop Applications That Supports Stored Procedures?

  - by Cape Cod Gunny

  I started with Turbo Pascal 3, went to TP5, Bought TP6 called Borland the next day and downgraded to TP5.5. Bought Delphi 3, and now have Delphi 5 Enterprise. I sort of lost interest in writing code about 4-5 years ago for two reasons; Spent all day writing ASP & SQL for someone else. PC Techniques magazine went away. I've got a few programs in the shareware market that are solid performers but are in need of serious updating. I love Delphi or did when it was Borland (before Borland bought DBase and all the other crap), I'd like to salvage as much of my D5E code as possible but I doubt I can. I plan on upgrading to Delphi 2010. My next software release needs to interact with a database. I'm very proficient with MS Sql and like to put all of the database code in stored procedures. What is the best database choice that interacts well with Delphi, allows stored procedures and is so easy to deploy that even the Geico gecko could deploy it? 10/25/2009 18:53 PM EST Re-Opened After Reading Install Docs for Delphi 2010 I downloaded a trial version of Delphi 2010 and unzipped the install. I've been reading the install docs included in the package. I started with the install.htm inside the zip package. install.htm wisely tells you to see the following two articles: Installation Notes: http://edn.embarcadero.com/article/39754 Release Notes: http://edn.embarcadero.com/article/39758 the release notes state the following... MSSQL driver requires the installation of the SQL Native Client. SQL Native Client 2008 is required for dbxmss.dll. SQL Native Client 2005 is required for dbxmss9.dll I checked my machine to see if SQL Native Client is installed. Nope. I wasn't done reading the docs so I made a note to install SQL Native Client. I googled dbxmss.dll and dbxmss9.dll and found a very interesting thread on the Embarcadero forums. read thread here. After reading this thread and some careful thought I don't think I will be using Microsoft SQL Express. I can't rely on my customers having the right drivers installed. So, I'm back to looking for a different solution. If I'm selling a $40 product to the general masses I need to have a bulletproof solution that doesn't require my brand new customer to update their machine before my software will work.

  Read the article

• Psychology researcher wants to learn new language

  - by user273347

  I'm currently considering R, matlab, or python, but I'm open to other options. Could you help me pick the best language for my needs? Here are the criteria I have in mind (not in order): Simple to learn. I don't really have a lot of free time, so I'm looking for something that isn't extremely complicated and/or difficult to pick up. I know some C, FWIW. Good for statistics/psychometrics. I do a ton of statistics and psychometrics analysis. A lot of it is basic stuff that I can do with SPSS, but I'd like to play around with the more advanced stuff too (bootstrapping, genetic programming, data mining, neural nets, modeling, etc). I'm looking for a language/environment that can help me run my simpler analyses faster and give me more options than a canned stat package like SPSS. If it can even make tables for me, then it'll be perfect. I also do a fair bit of experimental psychology. I use a canned experiment "programming" software (SuperLab) to make most of my experiments, but I want to be able to program executable programs that I can run on any computer and that can compile the data from the experiments in a spreadsheet. I know python has psychopy and pyepl and matlab has psychtoolbox, but I don't know which one is best. If R had something like this, I'd probably be sold on R already. I'm looking for something regularly used in academe and industry. Everybody else here (including myself, so far) uses canned stat and experiment programming software. One of the reasons I'm trying to learn a programming language is so that I can keep up when I move to another lab. Looking forward to your comments and suggestions. Thank you all for your kind and informative replies. I appreciate it. It's still a tough choice because of so many strong arguments for each language. Python - Thinking about it, I've forgotten so much about C already (I don't even remember what to do with an array) that it might be better for me to start from scratch with a simple program that does what it's supposed to do. It looks like it can do most of the things I'll need it to do, though not as cleanly as R and MATLAB. R - I'm really liking what I'm reading about R. The packages are perfect for my statistical work now. Given the purpose of R, I don't think it's suited to building psychological experiments though. To clarify, what I mean is making a program that presents visual and auditory stimuli to my specifications (hundreds of them in a preset and/or randomized sequence) and records the response data gathered from participants. MATLAB - It's awesome that cognitive and neuro folk are recommending MATLAB, because I'm preparing for the big leap from social and personality psychology to cognitive neuro. The problem is the Uni where I work doesn't have MATLAB licenses (and 3750 GBP for a compiler license is not an option for me haha). Octave looks like a good alternative. PsychToolbox is compatible with Octave, thankfully. SQL - Thanks for the tip. I'll explore that option, too. Python will be the least backbreaking and most useful in the short term. R is well suited to my current work. MATLAB is well suited to my prospective work. It's a tough call, but I think I am now equipped to make a more well-informed decision about where to go next. Thanks again!

  Read the article

• SQL Server to PostgreSQL - Migration and design concerns

  - by youwhut

  Currently migrating from SQL Server to PostgreSQL and attempting to improve a couple of key areas on the way: I have an Articles table: CREATE TABLE [dbo].[Articles]( [server_ref] [int] NOT NULL, [article_ref] [int] NOT NULL, [article_title] [varchar](400) NOT NULL, [category_ref] [int] NOT NULL, [size] [bigint] NOT NULL ) Data (comma delimited text files) is dumped on the import server by ~500 (out of ~1000) servers on a daily basis. Importing: Indexes are disabled on the Articles table. For each dumped text file Data is BULK copied to a temporary table. Temporary table is updated. Old data for the server is dropped from the Articles table. Temporary table data is copied to Articles table. Temporary table dropped. Once this process is complete for all servers the indexes are built and the new database is copied to a web server. I am reasonably happy with this process but there is always room for improvement as I strive for a real-time (haha!) system. Is what I am doing correct? The Articles table contains ~500 million records and is expected to grow. Searching across this table is okay but could be better. i.e. SELECT * FROM Articles WHERE server_ref=33 AND article_title LIKE '%criteria%' has been satisfactory but I want to improve the speed of searching. Obviously the "LIKE" is my problem here. Suggestions? SELECT * FROM Articles WHERE article_title LIKE '%criteria%' is horrendous. Partitioning is a feature of SQL Server Enterprise but $$$ which is one of the many exciting prospects of PostgreSQL. What performance hit will be incurred for the import process (drop data, insert data) and building indexes? Will the database grow by a huge amount? The database currently stands at 200 GB and will grow. Copying this across the network is not ideal but it works. I am putting thought into changing the hardware structure of the system. The thought process of having an import server and a web server is so that the import server can do the dirty work (WITHOUT indexes) while the web server (WITH indexes) can present reports. Maybe reducing the system down to one server would work to skip the copying across the network stage. This one server would have two versions of the database: one with the indexes for delivering reports and the other without for importing new data. The databases would swap daily. Thoughts? This is a fantastic system, and believe it or not there is some method to my madness by giving it a big shake up. UPDATE: I am not looking for help with relational databases, but hoping to bounce ideas around with data warehouse experts.

  Read the article

• Is One Tool or a Suite of Tools Better for Scrum?

  - by Rob Wells

  G'day, Edit: We've been using Scrum very successfully for several years on several projects of varying sizes. In fact, our team developed the successful iPlayer project for the BBC using a classical Scrum approach. After using various combinations of tools, some high-tech, some low-tech, across these projects we now wish to try adopting a suitable tool suite. Our manager is to some extent attempting to force the adoption of a single suite of tools for Scrum. I've looked at the SO question "Best Scrum tools" and most people seem to recommend either: a suite of low-tech solutions, e.g. whiteboards, post-its, index cards, etc., or a monolithic tool that tries to satisfy as much as possible of the process, e.g. Agilo, Mingle, ScrumWorks, Target Process, etc. Our team is currently evaluating several different Scrum tools. However, we are looking at selecting a single, monolithic tool, e.g. Agilo. All of the "one-stop" solutions have their strengths and weaknesses with the serious enterprise type solutions being the best sort of fit. But all have some short comings. After reading the paper "Peer Code Review: An Agile Process" over at SmartBear I started wondering if we were trying to force adoption of a tool on a "best fit" basis. I think you can take a couple of reference artefacts of the Scrum development process, say user stories, epics and themes, and the code base which must use a well-known SCM, e.g. SVN, Hg, etc. Then if we take that as the common reference points for the tools employed then we would be able to use a group of tools to handle the different aspects of the Scrum process rather than try forcing a fit of a single tool would is a bit like forcing a square peg into the round hole. In this way, providing you've agreed your common reference points, you can use several tools, each performing their role better than a could be done by a single component in a monolithic tool suite. Is this a more sensible approach? Are the two reference points I mentioned above suitable, or is their a better choice of points where the tools would meet? cheers,

  Read the article

• Search like google

  - by Rajanikant

  I have a task to make a search module in which i have database users and tablename userProfile and i want to search profile when i entered text in text box for ex. if i entered "I am looking for MBA in delhi" or 'mba information in delhi' it will displayed all user registered expertise as mba and city in delhi . this will be like job portal or any social networking portal my database is -- phpMyAdmin SQL Dump -- version 2.8.1 -- http://www.phpmyadmin.net -- Host: localhost -- Generation Time: May 01, 2010 at 10:58 AM -- Server version: 5.0.21 -- PHP Version: 5.1.4 -- Database: users -- -- Table structure for table userProfile CREATE TABLE userprofile ( id int(11) NOT NULL auto_increment, name varchar(50) collate latin1_general_ci NOT NULL, expertise varchar(50) collate latin1_general_ci NOT NULL, city varchar(50) collate latin1_general_ci NOT NULL, state varchar(50) collate latin1_general_ci NOT NULL, discription varchar(500) collate latin1_general_ci NOT NULL, PRIMARY KEY (id) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci AUTO_INCREMENT=3 ; -- -- Dumping data for table userProfile INSERT INTO userProfile VALUES (1, 'a', 'MBA HR', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); INSERT INTO userProfile VALUES (2, 'b', 'MBA marketing', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); and search.php page <?php include("config.php"); include("class.search.php"); $br=new search(); if($_POST['searchbutton']) { $str=$_POST['textfield']; $brstr=$br->breakkey($str); } ?> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Untitled Document</title> </head> <body> <table width="100%" border="0"> <form name="frmsearch" method="post"> <tr> <td width="367">&nbsp;</td> <td width="300"><label> <input name="textfield" type="text" id="textfield" size="50" /> </label></td> <td width="294"><label> <input type="submit" name="searchbutton" id="button" value="Search" /> </label></td> </tr></form> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> </table> </body> </html> and config.php is <?php error_reporting(E_ALL); $host="localhost"; $username="root"; $password=""; $dbname="users"; $con=mysql_connect($host,$username,$password) or die("could not connect database"); $db=mysql_select_db($dbname,$con) or die("could not select database"); ?> and class.search.php is <?php class search { function breakkey($key) { global $db; $words=explode(' ',$key); return $words; } function searchitem($perm) { global $db; foreach($perm as $k=>$v) { $sql="select * from users" } } } ?>

  Read the article

• Custom validator not invoked when using Validation Application Block through configuration

  - by Chris

  I have set up a ruleset in my configuration file which has two validators, one of which is a built-in NotNullValidator, the other of which is a custom validator. The problem is that I see the NotNullValidator hit, but not my custom validator. The custom validator is being used to validate an Entity Framework entity object. I have used the debugger to confirm the NotNull is hit (I forced a failure condition so I saw it set an invalid result), but it never steps into the custom one. I am using MVC as the web app, so I defined the ruleset in a config file at that layer, but my custom validator is defined in another project. However, I wouldn't have thought that to be a problem because when I use the Enterprise Library Configuration tool inside Visual Studio 2008 it is able to set the type properly for the custom validator. As well, I believe the custom validator is fine as it builds ok, and the config tool can reference it properly. Does anybody have any ideas what the problem could be, or even what to do/try to debug further? Here is a stripped down version of my custom validator: [ConfigurationElementType(typeof(CustomValidatorData))] public sealed class UserAccountValidator : Validator { public UserAccountValidator(NameValueCollection attributes) : base(string.Empty, "User Account") { } protected override string DefaultMessageTemplate { get { throw new NotImplementedException(); } } protected override void DoValidate(object objectToValidate, object currentTarget, string key, ValidationResults results) { if (!currentTarget.GetType().Equals(typeof(UserAccount))) { throw new Exception(); } UserAccount userAccountToValidate = (UserAccount)currentTarget; // snipped code ... this.LogValidationResult(results, "The User Account is invalid", currentTarget, key); } } Here is the XML of my ruleset in Validation.config (the NotNull rule is only there to force a failure so I could see it getting hit, and it does): <validation> <type defaultRuleset="default" assemblyName="MyProj.Entities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="MyProj.Entities.UserAccount"> <ruleset name="default"> <properties> <property name="HashedPassword"> <validator negated="true" messageTemplate="" messageTemplateResourceName="" messageTemplateResourceType="" tag="" type="Microsoft.Practices.EnterpriseLibrary.Validation.Validators.NotNullValidator, Microsoft.Practices.EnterpriseLibrary.Validation, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Not Null Validator" /> </property> <property name="Property"> <validator messageTemplate="" messageTemplateResourceName="" messageTemplateResourceType="" tag="" type="MyProj.Entities.UserAccountValidator, MyProj.Entities, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Custom Validator" /> </property> </properties> </ruleset> </type> </validation> And here is the stripped down version of the way I invoke the validation: var type = entity.GetType() var validator = ValidationFactory.CreateValidator(type, "default", new FileConfigurationSource("Validation.config")) var results = validator.Validate(entity) Any advice would be much appreciated! Thanks, Chris

  Read the article

• Good Secure Backups Developers at Home

  - by slashmais

  What is a good, secure, method to do backups, for programmers who do research & development at home and cannot afford to lose any work? Conditions: The backups must ALWAYS be within reasonably easy reach. Internet connection cannot be guaranteed to be always available. The solution must be either FREE or priced within reason, and subject to 2 above. Status Report This is for now only considering free options. The following open-source projects are suggested in the answers (here & elsewhere): BackupPC is a high-performance, enterprise-grade system for backing up Linux, WinXX and MacOSX PCs and laptops to a server's disk. Storebackup is a backup utility that stores files on other disks. mybackware: These scripts were developed to create SQL dump files for basic disaster recovery of small MySQL installations. Bacula is [...] to manage backup, recovery, and verification of computer data across a network of computers of different kinds. In technical terms, it is a network based backup program. AutoDL 2 and Sec-Bk: AutoDL 2 is a scalable transport independant automated file transfer system. It is suitable for uploading files from a staging server to every server on a production server farm [...] Sec-Bk is a set of simple utilities to securely back up files to a remote location, even a public storage location. rsnapshot is a filesystem snapshot utility for making backups of local and remote systems. rbme: Using rsync for backups [...] you get perpetual incremental backups that appear as full backups (for each day) and thus allow easy restore or further copying to tape etc. Duplicity backs directories by producing encrypted tar-format volumes and uploading them to a remote or local file server. [...] uses librsync, [for] incremental archives Other Possibilities: Using a Distributed Version Control System (DVCS) such as Git(/Easy Git), Bazaar, Mercurial answers the need to have the backup available locally. Use free online storage space as a remote backup, e.g.: compress your work/backup directory and mail it to your gmail account. Strategies See crazyscot's answer

  Read the article

• Need Help Setting Transparent Image to Clipboard

  - by AMissico

  I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Following is the specific code with the complete working project at ftp://missico.net/ImageVisualizer.zip. This is an image Debug Visualizer class library, but I made to run as executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open with an image editor, and then deleting the background added due to the screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. I imagine the problem is related to BITMAPV5HEADER and CreateDIBitmap. Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { //'Applications that I have verified can paste the clipboard custom data format PNG are: //' Word 2003 //' Excel 2003 using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

  Read the article

• Is the Unix Philosophy still relevant in the Web 2.0 world?

  - by David Titarenco

  Introduction Hello, let me give you some background before I begin. I started programming when I was 5 or 6 on my dad's PSION II (some primitive BASIC-like language), then I learned more and more, eventually inching my way up to C, C++, Java, PHP, JS, etc. I think I'm a pretty decent coder. I think most people would agree. I'm not a complete social recluse, but I do stuff like write a virtual machine for fun. I've never taken a computer course in college because I've been in and out for the past couple of years and have only been taking core classes; never having been particularly amazing at school, perhaps I'm missing some basic tenet that most learn in CS101. I'm currently reading Coders at Work and this question is based on some ideas I read in there. A Brief (Fictionalized) Example So a certain sunny day I get an idea. I hire a designer and hammer away at some C/C++ code for a couple of months, soon thereafter releasing silvr.com, a website that transmutes lead into silver. Yep, I started my very own start-up and even gave it a clever web 2.0 name with a vowel missing. Mom and dad are proud. I come up with some numbers I should be seeing after 1, 2, 3, 6, 9, 12 months and set sail. Obviously, my transmuting server isn't perfect, sometimes it segfaults, sometimes it leaks memory. I fix it and keep truckin'. After all, gdb is my best friend. Eventually, I'm at a position where a very small community of people are happily transmuting lead into silver on a semi-regular basis, but they want to let their friends on MySpace know how many grams of lead they transmuted today. And they want to post images of their lead and silver nuggets on flickr. I'm losing out on potential traffic unless I let them log in with their Yahoo, Google, and Facebook accounts. They want webcam support and live cock fighting, merry-go-rounds and Jabberwockies. All these things seem necessary. The Aftermath Of course, I have to re-write the transmuting server! After all, I've been losing money all these months. I need OAuth libraries and OpenID libraries, JSON support, and the only stable Jabberwocky API is for Java. C++ isn't even an option anymore. I'm just one guy! The Java binary just grows and grows since I need some legacy Apache include for the JSON library, and some antiquated Sun dependency for OAuth support. Then I pick up a book like Coders at Work and read what people like jwz say about complexity... I think to myself.. Keep it simple, stupid. I like simple things. I've always loved the Unix Philosophy but even after trying to keep the new server source modular and sleek, I loathe having to write one more line of code. It feels that I'm just piling crap on top of other crap. Maybe I'm naive thinking every piece of software can be simple and clever. Maybe it's just a phase.. or is the Unix Philosophy basically dead when it comes to the current state of (web) development? I'm just kind of disheartened :(

  Read the article

• How hard programming is? Really. [closed]

  - by Bubba88

  Hi! The question is about your perception of programming activity. How hard/exacting this task is? There is much buzz about programming nowadays, people say that programmers are smart, very technical and abstract at a time, know much about world, psychology etc.. They say, that programmers got really powerful brain thing, cause there is much to keep in consideration simultaneously again with much information folded into each other associatively (up 10 levels of folding they say))) Still, there are some terms to specify at our own.. So that is the question: What do you think about programming in general? Is it hard? Is it 'for everyone' or for the particular kind of people only? How much non-CS background do you need to program (just to program, really; enterprise applications for example)? How long is the learning curve? (again, for programming in general) And another bunch of random questions: - If you were not to like/love programming, would that be a serious trouble bothering your current employment? - If you were to start from the beginning, would you chose that direction this time? - What other areas (jobs or maybe hobbies) are comparable to programming in the way they can explode someone's lovely brain? - Is 'non turing-complete programming' (SQL, XML, etc.) comparable to what we do or is it really way easier, less requiring, cheap and akin to cooking :)? Well, the essence is: How would you describe programming activity WRT to its difficulty? Or, on the other hand: Did you ever catch yourself thinking at some point: OMG, it's sooo hard! I don't know how would I ever program, even carried away this way and doing programming just for fun? It's very interesting to know your opinion, your'e the programmers after all. I mean much people must be exaggerating/speculating about the thing they do not really know about. But that musn't be the case here on SO :) P.S.: I'll try my best to update this post later, and you please edit it too. At least I'll get decent English in my question text :)

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >