Search Results

Search found 21008 results on 841 pages for 'chuzein part ii'.

Page 304/841 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

  • Network use of Gaming PC

    - by Matthew Patrick Cashatt
    Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

    Read the article

  • How should I convert a physical drive to a VHD for use with VirtualPC?

    - by RBerteig
    I have the hard disks from a PC that was happily running Windows Me until is it suffered an unknown hardware failure. The drives are intact, and can be mounted and read on other PCs. We have data backups, but there is licensed software installed that may not be possible to migrate to newer versions running on a more modern platform making the idea of just booting a virtual image attractive. Is it possible to make VHDs from the drives such that I can boot them in VirtualPC? If not VirtualPC, would it be possible in any other virtualization tool? Edit: Some more details.... The system was running Windows Me, but upgraded from Windows 95 (or possibly 98). It can't have been more than a Pentium II, but I will have to look at the motherboard to confirm that. There were no "exotic" devices installed, and nothing beyond the usual legacy stuff that would need to survive into a virtual machine. The licensed software did not have a dongle, so I won't need to worry about virtualizing a physical dongle of some kind. Licenses were probably died to the disk serial number. There were two HDs, both IDE. The boot disk is about 6GB, and the spare data disk is 12GB, but nearly empty. I have a small bias in favor of VirtualPC just because its free and I've used it successfully in the past. But this is a good excuse to revisit the state of the art. I do know from direct experience that it is possible to install and boot DOS 5.0 and Win95 in VirtualPC, but the VM extensions weren't available so the experience isn't as seamless as I would have liked. A very old DirectX game that failed miserably under XP SP2 runs really nicely on that VM, and actually plays better in a lot of ways than it did on period hardware, so that gives me hope that this is possible. Edit 2: Well, I'm closer than I was when I asked... so thanks to all for helpful suggestions and hints to what I should be trying. I used WinImage to copy the disks, and VirtualPC 2007 to attempt to boot. So far, I have it booting in safe mode, but hanging with a black screen otherwise. I strongly suspect that the copy of Artisoft Lantastic 8.0 (anyone else remember them?) that is still installed for networking with even older PCs that mostly don't exist any more is the culprit there. In my infinite free time, I will try to resolve the differences between a Safe Mode boot and a normal boot, and feel that it is likely to yield to pressure. I'd accept more than one answer if I could... this isn't as black and white a question as the one accepted answer convention assumes.

    Read the article

  • file corruption on read/write 2.6.32-22-server (happens across many kernels)

    - by Jonathan
    Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

    Read the article

  • Possible capacitor plague - need help identifying

    - by cornjuliox
    I've been having some PC power issues lately, and I think I've tracked it down to a bad power supply. Lately, when I'm on my PC it will often restart without warning, displaying "Hypertransport sync flood error occurred last boot." once POST finishes. I've googled the error, but can't come to a definitive conclusion as to what's causing it. I've seen posts suggesting that it might be a power supply issue, but nothing conclusive. Here's what I've done so far: -I haven't installed anything suspect within the last 3 months. -I do overclock just a tiny bit, so I tried raising the voltages a little. That didn't work so I brought both CPU multiplier and voltages all back to their default settings, but that didn't solve the problem either. The problem still occurs. -AV scanned the whole system, nothing suspect. -I suspected that it might be a bad power supply so I cracked that open and found the following: I think it might be cap plague, but I'm not sure. It looks more like glue TBH. Could someone help me figure out what might be wrong with this PC? EDIT: Sometimes, after these restarts, I noticed that the GPU fan doesn't spin up, and the single rear case fan that just happens to be connected to the same molex Y-cable as the GFX card doesn't spin up either. Anything to that? EDIT 2: I do use the system quite heavily, but I don't know how that will factor into this. I often play Diablo 3 and EVE Online at the same time, frequently alt-tabbing between the two. I also have Firefox open in the background, sometimes with several tabs, and if I feel like it, I'll mute the in-game sound and open foobar2000 for better music. Could it be that I'm just pushing this thing too hard? EDIT 3: I also noticed something odd. Right before I experience these restarts, my monitor would suffer from very faint lines of static moving across the screen. The monitor is still very much useable, but it is very annoying. Following the restart it disappears, and then would gradually re-appear over the next few days, and then restarts again. I find it to be very odd. System specs for good measure: Orion 600 W PSU AMD Athlon II X3 440 (overclocked to 3.14 ghZ, raised the CPU multiplier to x13 from x10) MSI G40-775 motherboard 1 GB inno3D GTX 550 ti 4 GB DDR3 RAM 500 GB Samsung SATA HD

    Read the article

  • Why is the server performance so poor? What can be done to improve the speed of the server?

    - by fslsyed
    Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

    Read the article

  • Radeon HD4850 serious issues when using DirectX 10

    - by ricsmania
    Hello, I have a problem with my video card. Whenever I run a DirectX 10 game, it works for a few seconds (10 or so) and then starts displaying nothing but big polygons. I have tested this with Crysis and Resident Evil 5, both have the same problems. The same games running under DirectX 9 work fine, except for some small black squares once in a while. I have the following specs: Asus P7P55D LE Intel Core i5 750 Sapphire Radeon HD4850 1GB 2x2GB Patriot Viper II Sector 5, DDR3 1600 MHz OCZ Stealth X Stream 500SXS 500W At first I thought it could be the video card overheating (it has stock cooling), but the game crashes even when it's running at 50 degrees C, and it's never been higher than 70. I also thought it could be the PSU, but as far as I know 500W is enough for this computer, especially because I haven't overclocked anything. My OS is Windows 7 X64 and I am using Catalyst 10.10, but I have also tried many older versions with no success. I don't think there is a problem with the card itself, or else it wouldn't run DirectX 9 games I believe. I have spent many hours searching for a solution but I couldn't, so any help is appreciated. Thank you. EDIT: I did some further investigation about the problem, and it seems taspeotis was right, it might be related to memory. I slightly underclocked the memory from 993 to 965 MHz and the problem went away completely. Both the black squares using DirectX 9 and the weird polygons using DirectX 10. I was using RE DirectX 10 Benchmark, as it consistently crashed around the same point, and now I can play the full benchmark with no artifacts at all. Unfortunately, the underclock has an obvious hit in performance. Although it's not critical, it's definitely noticeable. So, if the video memory test software showed no erros, but the card needs an underclock to work, what might be the problem? Temperature? Voltage? By the way, I couldn't find what the default voltage for this card is. And what is a good software to try and increase it? I tried Ati Tray Tools but it has a bug that increases the clock speed dramatically whenever I change something in the Overclock tab, so I'm afraid it might fry my card. Worst case scenario, if I don't find I solution I will try to slightly increase the GPU clock to compensate for the memory clock. Thank you again.

    Read the article

  • NIC is receiving, but not transmitting at all?

    - by Shtééf
    I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

    Read the article

  • recommendations for efficient offsite remote backup solution of vm's

    - by senorsmile
    I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

    Read the article

  • Well....a ghost lives in my server...

    - by tsgiannis
    Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

    Read the article

  • Repair BAD Sectors or Buy a new HDD?

    - by Nehal J. Wani
    I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

    Read the article

  • Low FPS in some games, but hardware not fully used

    - by Mario De Schaepmeester
    I just did a little funny experiment in the game/sim "Train Simulator 2013". I normally have good FPS in it (around 30) at full settings. What I did was make a really, really long train so that the calculations the sim needed to make were enormous (the sim is quite realistic, it takes all things into account like speed/acceleration, G-forces, comfort levels, possible wheel slip and many more, and most of those things on each carriage seperately). This resulted in only 14FPS as reported by the game, but it felt more like 8FPS or so. I have a Logitech G15 keyboard which has an LCD, and it allows me to monitor CPU/RAM and video card load on it. The strange thing is, all CPU cores were busy, but the total load was only about 60% maximum at all times. The video card was only on 30% load (possibly an important note, the memory was full, which is however not unusual for the game in question). The RAM had plenty of room and there weren't many operations as it didn't grow or shrink much. I just have the feeling that the game would run smoother if it used more of my hardware power. Why is it not doing so? I had the same in another game, The Elder Scrolls: Morrowind when using more than 100 mods (that all use scripting) and a few high res texture mods, + a full-on graphics improvement program. The engine is very old (2003), and so I thought this might be the cause (not being optimised for multithreading). I had thought of possible causes, like: The operating system doesn't let the games use all the resources. It doesn't make use of multi-threading appropriately. To eliminate the former, I tried a CPU stress tool and that got 100% CPU juice as I let it run, so the OS is not the problem. I gave its thread the "higher" priority though. My actual question In both games, I did things the engine was not really built to do or support. Can those games' framerate be limited cause of their own engine not being able to cope? What is the real reason and more importantly, can I help it? And in any case, could something actually be wrong with my hardware? It's all reasonably new, a couple of months, and I (almost) never experience any other trouble. Modern and much more demanding games work absolutely fine. Specs CPU: AMD Phenom II 965 X4 @ 3.4gHz RAM: 8GB of DDR3 RAM Video: MSI GTX560 (nVidia chip) with 1GB of GDDR5 memory OS: Windows 7 Ultimate 64 bit Nothing overclocked.

    Read the article

  • BlueScreens on my ThinkPad with Windows 7 64 Bit and a SSD (CRITICAL_OBJECT_TERMINATION, ntoskernel.exe)

    - by pvorb
    I'm getting BlueScreens about every five days for more than three months. Here's an example: A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntoskrnl.exe CRITICAL_OBJECT_TERMINATION If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x000000f4 (0x0000000000000003, 0xfffffa80065f2b30, 0xfffffa80065f2e10, 0xfffff80002f9bf40) *** ntoskrnl.exe - Address 0xfffff80002c98d00 base at 0xfffff80002c19000 DateStamp 0x4d9fdd5b It's has always been the same BlueScreen message showing CRITICAL_OBJECT_TERMINATION, 0x000000f4, and ntoskrnl.exe. Of course the addresses change. My computer is a ThinkPad T400 (about 2 years old) with a SSD in it. I'm also running Windows 7 Professional 64 bit. When I bought my computer, it had a 250GByte SeaGate HDD in it, which I replaced by a 500GByte HDD by Western Digital. Last september I bought a Corsair F120 SSD and replaced the HDD by this SSD. Then I bought a LEICKE HDD adapter for the UltraBay II where I plugged in my 500GByte HDD. This configuration ran about half a year without any errors. After re-installing Windows this spring, I am getting regular BlueScreens. Sometimes my system runs for about 2 weeks without a BSOD, sometimes I get several BlueScreens a day. The only thing that I noticed is, that I'm always running Google Chrome when it happens. Is there anyone who has made his/her own bad experiences whith some of my components or is there anybody who can tell me if it would be helpful to send my notebook to Lenovo? Thank you very much for your help on my issue! Regards, Paul

    Read the article

  • bluetooth connection using pybluez

    - by srj0408
    I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

    Read the article

  • Invalid URI: The Uri scheme is too long

    - by phenevo
    Hi, I have XML: Which is result of this part of query: SELECT Countries.FileSystemName as country ,Regions.DefaultName as region ,Provinces.DefaultName as province,cities.defaultname as city,cities.code as cityCode, IndividualFlagsWithForObjects.value as Status I have xslt: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="text" encoding="iso-8859-1"/> <xsl:param name="delim" select="string(',')" /> <xsl:param name="quote" select="string('&quot;')" /> <xsl:param name="break" select="string('&#xD;')" /> <xsl:template match="/"> <xsl:apply-templates select="results/countries" /> </xsl:template> <xsl:template match="countries"> <xsl:apply-templates /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$break" /> </xsl:if> </xsl:template> <xsl:template match="*"> <!-- remove normalize-space() if you want keep white-space at it is --> <xsl:value-of select="concat($quote, normalize-space(.), $quote)" /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$delim" /> </xsl:if> </xsl:template> <xsl:template match="text()" /> </xsl:stylesheet> And is part of code XmlReader reader = cmd.ExecuteXmlReader(); doc.LoadXml("<results></results>"); XmlNode newNode = doc.ReadNode(reader); while (newNode != null) { doc.DocumentElement.AppendChild(newNode); newNode = doc.ReadNode(reader); } doc.Save(@"c:\listOfCities.xml"); XslCompiledTransform XSLT = new XslCompiledTransform(); XsltSettings settings = new XsltSettings(); settings.EnableScript = true; XSLT.Load(@"c:\xsltfile1.xslt", settings, new XmlUrlResolver()); XSLT.Transform(doc.OuterXml,@"c:\myCities.csv"); <-here I get error Why I get error. Is seems to be good .

    Read the article

  • "Invalid provider type specified" when signing clickonce manifest in VS2008

    - by Mark
    I have a certificate issued by a CA on our intranet (it's a V3 sha1 pfx file). When I use this in the signing part of my clickonce (vsto addin) project, I get the error: C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v9.0\OfficeTools\Microsoft.VisualStudio.Tools.Office.Office2007.targets(250,9): error MSB3482: An error occurred while signing: Invalid provider type specified. Does anyone know what's going on here? Thanks!

    Read the article

  • Xcode "Build and Archive" from command line

    - by Dan Fabulich
    Xcode 3.2 provides an awesome new feature under the Build menu, "Build and Archive" which generates an .ipa file suitable for Ad Hoc distribution. You can also open the Organizer, go to "Archived Applications," and "Submit Application to iTunesConnect." Is there a way to use "Build and Archive" from the command line (as part of a build script)? I'd assume that xcodebuild would be involved somehow, but the man page doesn't seem to say anything about this.

    Read the article

  • OpenCV/EmguCV face recognition

    - by Meko
    Hi .I am tying to make app that detect face and recognize it. I made Face detection but I want some idea to when making recognition. I using web cam for tracking and It can recognize face.Then I am taking only part of face to an new gray image and comparing it using EigenObjectRecognizer with list of images in database.But it is not giving good result.Some times find some thing wrong,some times nothing.I want to ask that for comparing photos which additional techniques i must implement?Like Histogram equalization or resolution of faces equalization ?

    Read the article

  • UIModalPresentationFormSheet on iPad in landscape mode

    - by Ivan
    I created a UIViewController view from XIB with modalPresentationStyle set to UIModalPresentationFormSheet and everything works great in portrait mode. When I switch to landscape the view gets moved upperleft (it's not centered as it should be) and most part of it is clipped. Any ideas why this is happening and how to solve it? Thanks

    Read the article

  • Recover WinForms from dll

    - by Ramiz Uddin
    We think most of the source has been recovered through Reflector .NET. A utility which export the dll as C# source. The only missing part is WinForms which is not included when Reflector .NET export the dll source. Is there any way to get the WinForms recover from dll? Thanks.

    Read the article

  • Requires valid signature error, facebook api

    - by soField
    i'am using this example http://github.com/facebook/connect-js/blob/master/examples/jquery/login.html works fine , but when i change query part to read my statuses i am getting exception Requires valid signature for instance this query select message from status where uid=myuid

    Read the article

  • How to customize / style a UIPopoverController

    - by Thomas Joos
    hi dudes, I'm working on an iPad application and I'm using UIPopoverControllers. I'm at the part where the app needs to be branded and styled and i'm wondering how to change the color / tint of the UIPopoverController? Standard is dark blue but it needs to be another color.. is this possible? Greets, Thomas

    Read the article

  • Using str_replace with smarty variable

    - by zx
    Hello, Basically I just want to strip out a part of my smarty variable contents. {foreach from=$_sequences key=k item=v} {if $v.pri == $smarty.get.cf && $v.type == 'TTS'} {$v.data} {/if} {/foreach} {$v.data} will echo out 21,5555555555 I want it to only echo out 5555555555. I tried str_replace but couldn't get it working.. str_replace('"','',${v.data});// - doesn't work str_replace('"','',$v.data);// - doesn't work What would be the best way I can accomplish this?

    Read the article

  • Mike Cohn-style burndown charts in JIRA

    - by Fuzzy Purple Monkey
    We use Jira/Greenhopper for our project planning/tracking. The built-in graphs are great, but when a new issue/story is added during a project, the whole burn-down graph moves up rather than increasing the part of the graph when the issue was added. Ideally I'd like to generate a Mike Cohn-style burndown graph, which shows a hump when new issues are added. Does anyone know of any plugins that support this, or been able to extract this data directly from the database?

    Read the article

  • Exception seem in an eclipse GMF application when file not present in workspace

    - by rush00121
    I am developing a GMF application . In this situation , I start my workspace and load a file in the workspace . Then I close the workspace and then delete the file from the workspace . After that, I try to restart my application and restore the workspace . Of course , now since the file does not exist , there are going to be exceptions . I tried a lot to handle these exceptions but if I try to get rid of one exception , then another pops up . Does anyone know what methods do I have to override in order to handle this situation correctly . I am attaching the stacktrace that I get in this exception for a better picture . org.eclipse.core.runtime.CoreException: ERROR at org.eclipse.gmf.runtime.diagram.ui.resources.edito r.parts.DiagramDocumentEditor.createPartControl(Di agramDocumentEditor.java:1509) at com.fnfr.itest.topology.tbml.diagram.custom.part.S ingleFileTbmlDiagramEditor.createPartControl(Singl eFileTbmlDiagramEditor.java:120) at org.eclipse.ui.internal.EditorReference.createPart Helper(EditorReference.java:662) at org.eclipse.ui.internal.EditorReference.createPart (EditorReference.java:462) at org.eclipse.ui.internal.WorkbenchPartReference.get Part(WorkbenchPartReference.java:595) at org.eclipse.ui.internal.EditorAreaHelper.setVisibl eEditor(EditorAreaHelper.java:271) at org.eclipse.ui.internal.EditorManager.setVisibleEd itor(EditorManager.java:1417) at org.eclipse.ui.internal.EditorManager$5.runWithExc eption(EditorManager.java:942) at org.eclipse.ui.internal.StartupThreading$StartupRu nnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableL ock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessa ges(Synchronizer.java:134) at org.eclipse.swt.widgets.Display.runAsyncMessages(D isplay.java:3855) at org.eclipse.swt.widgets.Display.readAndDispatch(Di splay.java:3476) at org.eclipse.ui.application.WorkbenchAdvisor.openWi ndows(WorkbenchAdvisor.java:803) at org.eclipse.ui.internal.Workbench$28.runWithExcept ion(Workbench.java:1384) at org.eclipse.ui.internal.StartupThreading$StartupRu nnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableL ock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessa ges(Synchronizer.java:134) at org.eclipse.swt.widgets.Display.runAsyncMessages(D isplay.java:3855) at org.eclipse.swt.widgets.Display.readAndDispatch(Di splay.java:3476) at org.eclipse.ui.internal.Workbench.runUI(Workbench. java:2316) at org.eclipse.ui.internal.Workbench.access$4(Workben ch.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench. java:500) at org.eclipse.core.databinding.observable.Realm.runW ithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWork bench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(Pl atformUI.java:149) at com.fnfr.svt.rcp.Application.runWorkbench(Applicat ion.java:205) at com.fnfr.svt.rcp.Application.start(Application.jav a:190) at org.eclipse.equinox.internal.app.EclipseAppHandle. run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseA ppLauncher.runApplication(EclipseAppLauncher.java: 110) at org.eclipse.core.runtime.internal.adaptor.EclipseA ppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.ru n(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.ru n(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknow n Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Un known Source) at java.lang.reflect.Method.invoke(Unknown Source) at org.eclipse.equinox.launcher.Main.invokeFramework( Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.ja va:514) at org.eclipse.equinox.launcher.Main.run(Main.java:13 11) Add to rshah's Reputation

    Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >