Search Results

Search found 87891 results on 3516 pages for 'server migration'.

Page 304/3516 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

• SQL Server performance issue.

  - by Jit

  Hi Friends, I have been trying to analyze performance issue with SQL Server 2005. We have 30 jobs, one for each databases (30 databases, one per each client). The jobs run at early morning at an interval of 5 minutes. When I run the job individually for testing, for most of the databases it finishes in 7 to 9 minutes. But when these jobs run at early morning, I see few jobs taking 2 to 3 hours to finish and the same takes few minutes as mentioned above if ran independently. We dont have any other job scheduled during that time, other than these 30 jobs. If we restart the server then for 2 or so days all the jobs finishes in few minutes, but over the period of time (from 3rd day suddenly), few jobs start taking hours to finish. What could be the possible reason of performance degradation over the period of time? I verified all the SPs and we uses temp tables and I made sure none of the temp table is left without dropping at the end of SP. Let me know what are the possible reasons for such behavior. Appreciate your time and help. Thanks

  Read the article

• Choose a XML node in SQL Server based on max value of a child element

  - by Jay

  I am trying to select from SQL Server 2005 XML datatype some values based on the max data that is located in a child node. I have multiple rows with XML similar to the following stored in a field in SQL Server: <user> <name>Joe</name> <token> <id>ABC123</id> <endDate>2013-06-16 18:48:50.111</endDate> </token> <token> <id>XYX456</id> <endDate>2014-01-01 18:48:50.111</endDate> </token> </user> I want to perform a select from this XML column where it determines the max date within the token element and would return the datarows similar to the result below for each record: Joe XYZ456 2014-01-01 18:48:50.111 I have tried to find a max function for xpath that would all me to select the correct token element but I couldn't find one that would work. I also tried to use the SQL MAX function but I wasn't able to get it working with that method either. If I only have a single token it of course works fine but when I have more than one I get a NULL, most likely because the query doesn't know which date to pull. I was hoping there would be a way to specify a where clause [max(endDate)] on the token element but haven't found a way to do that. Here is an example of the one that works when I only have a single token: SELECT XMLCOL.query('user/name').value('.','NVARCHAR(20)') as name XMLCOL.query('user/token/id').value('.','NVARCHAR(20)') as id XMLCOL.query('user/token/endDate').value(,'xs:datetime(.)','DATETIME') as endDate FROM MYTABLE

  Read the article

• Update or Insert Row depending on whether row is present in Microsoft SQL Server 2005

  - by Srikanth

  Hi, I am passing a XML document as a input to a stored procedure in Microsoft SQL Server 2005. This is the sample XML being passed as input <Strategy StrategyID="0" TOStrategyID="8" ShutdownQtySell="1" ShutdownQtyBuy="1"> <ParameterRange ParameterSetID="6" ParameterRangeID="1" ParameterRangeFrom="0" ParameterRangeTo="20" ParameterAutoTakeOut="False"> </ParameterRange> <ParameterRange ParameterSetID="6" ParameterRangeID="4" ParameterRangeFrom="21" ParameterRangeTo="40" ParameterAutoTakeOut="False"> </ParameterRange> <ParameterRange ParameterSetID="6" ParameterRangeID="5" ParameterRangeFrom="41" ParameterRangeTo="60" ParameterAutoTakeOut="False"> </ParameterRange> <ParameterRange ParameterSetID="6" ParameterRangeID="6" ParameterRangeFrom="61" ParameterRangeTo="80" ParameterAutoTakeOut="False"> </ParameterRange> <ParameterRange ParameterSetID="6" ParameterRangeID="7" ParameterRangeFrom="81" ParameterRangeTo="100" ParameterAutoTakeOut="False"> </ParameterRange> </Strategy> I am able to retrieve the data using OpenXML functionality in SQL server I am using this to get the data corresponding to ParameterRange rows SELECT ParameterRangeID as iRangeID, ParameterSetID as iSetID, ParameterRangeFrom as fRangeFrom, ParameterRangeTo as fRangeTo, ParameterAutoTakeOut as bTakeoutEnabled FROM OPENXML(@idoc, '/Strategy/ParameterRange', 1) WITH (ParameterSetID int,ParameterRangeID int,ParameterRangeFrom float,ParameterRangeTo float,ParameterAutoTakeOut bit) Now, I need to insert/update these rows into a table TempRanges which has (iRangeID,iSetID) as the primary key. If there is a row with the primary key, I want to update it the latest values and If there is no row with that primary key, I need to insert into the table. How can I accomplish this inside the Stored Procedure ? Thanks, Sri

  Read the article

• Advice Please: SQL Server Identity vs Unique Identifier keys when using Entity Framework

  - by c.batt

  I'm in the process of designing a fairly complex system. One of our primary concerns is supporting SQL Server peer-to-peer replication. The idea is to support several geographically separated nodes. A secondary concern has been using a modern ORM in the middle tier. Our first choice has always been Entity Framework, mainly because the developers like to work with it. (They love the LiNQ support.) So here's the problem: With peer-to-peer replication in mind, I settled on using uniqueidentifier with a default value of newsequentialid() for the primary key of every table. This seemed to provide a good balance between avoiding key collisions and reducing index fragmentation. However, it turns out that the current version of Entity Framework has a very strange limitation: if an entity's key column is a uniqueidentifier (GUID) then it cannot be configured to use the default value (newsequentialid()) provided by the database. The application layer must generate the GUID and populate the key value. So here's the debate: abandon Entity Framework and use another ORM: use NHibernate and give up LiNQ support use linq2sql and give up future support (not to mention get bound to SQL Server on DB) abandon GUIDs and go with another PK strategy devise a method to generate sequential GUIDs (COMBs?) at the application layer I'm leaning towards option 1 with linq2sql (my developers really like linq2[stuff]) and 3. That's mainly because I'm somewhat ignorant of alternate key strategies that support the replication scheme we're aiming for while also keeping things sane from a developer's perspective. Any insight or opinion would be greatly appreciated.

  Read the article

• SQL Server 2008 spatial index and CPU utilization with MapGuide Open Source 2.1

  - by Antonio de la Peña

  I have a SQL Server table with hundreds of thousands of geometry type parcels. I have made indexes on them trying different combinations of density and objects per cell settings. So far I'm settiling for LOW, LOW, MEDIUM, MEDIUM and 16 objects per cell and I made a SP that sets the bounding box according to the extents of the entities in the table. There is an incredible performance boost from queries taking almost minutes without index to less than seconds, it gets faster when the zoom is closer thus less objects are displayed. Yet the CPU utilization gets to 100% when querying for features, even when the queries themselves are fast. I'm worrying this will not fly in a production environment. I am using MapGuide Open Source 2.1 for this project, but I am positive the CPU load is caused by SQL Server. I wonder if my indexes are set properly. I haven't found any clear documentation on how to properly set them up. Every article I've read basically says "it depends..." but nothing specific. Do you have any recommendations for me, including books, articles? Thank you.

  Read the article

• Connecting to SQL Server 2005 via Web Service

  - by clear-cycle-corp

  Delphi 2010, dbExpress, and SQL Server 2005 DB I am trying to make a connection to a SQL Server 2005 DB using Delphi 2010 & DBExpress. If I create a standard delphi application and hard code my connection (IT WORKS!): procedure TForm1.Button1Click(Sender: TObject); var Conn: TSQLConnection; begin Conn:= TSQLConnection.Create(nil); Conn.ConnectionName:= 'VPUCDS_VPN_SE01'; Conn.LoadParamsOnConnect := True; Conn.LoginPrompt:=True; try Conn.Connected:= True; if Conn.Connected then ShowMessage('Connected!') else ShowMessage('NOT Connected!') finally Conn.Free; end; end; All the ini files, and DLLs reside in the same folder as my executable and yes, I have DBXMsSQL & MidasLib in the uses clause again, it works if its not a web service! However, if i then move the code over to a Web services CGI module: function TTest.ConnectToDB: Boolean;stdcall; var Conn: TSQLConnection; begin Conn:= TSQLConnection.Create(nil); Conn.ConnectionName:= 'VPUCDS_VPN_SE01'; Conn.LoadParamsOnConnect := True; Conn.LoginPrompt:=True; try Conn.Connected:= True; result:= Conn.Connected; finally Conn.Free; end; end; Thanks

  Read the article

• Sending files from server to client in Java

  - by Lee Jacobson

  Hi, I'm trying to find a way to send files of different file types from a server to a client. I have this code on the server to put the file into a byte array: File file = new File(resourceLocation); byte[] b = new byte[(int) file.length()]; FileInputStream fileInputStream; try { fileInputStream = new FileInputStream(file); try { fileInputStream.read(b); } catch (IOException ex) { System.out.println("Error, Can't read from file"); } for (int i = 0; i < b.length; i++) { fileData += (char)b[i]; } } catch (FileNotFoundException e) { System.out.println("Error, File Not Found."); } I then send fileData as a string to the client. This works fine for txt files but when it comes to images I find that although it creates the file fine with the data in, the image won't open. I'm not sure if I'm even going about this the right way. Thanks for the help.

  Read the article

• ORDER BY in a Sql Server 2008 view

  - by eidylon

  Hi all... we have a view in our database which has an ORDER BY in it. Now, I realize views generally don't order, because different people may use it for different things, and want it differently ordered. This view however is used for a VERY SPECIFIC use-case which demands a certain order. (It is team standings for a soccer league.) The database is Sql Server 2008 Express, v.10.0.1763.0 on a Windows Server 2003 R2 box. The view is defined as such: CREATE VIEW season.CurrentStandingsOrdered AS SELECT TOP 100 PERCENT *, season.GetRanking(TEAMID) RANKING FROM season.CurrentStandings ORDER BY GENDER, TEAMYEAR, CODE, POINTS DESC, FORFEITS, GOALS_AGAINST, GOALS_FOR DESC, DIFFERENTIAL, RANKING It returns: GENDER, TEAMYEAR, CODE, TEAMID, CLUB, NAME, WINS, LOSSES, TIES, GOALS_FOR, GOALS_AGAINST, DIFFERENTIAL, POINTS, FORFEITS, RANKING Now, when I run a SELECT against the view, it orders the results by GENDER, TEAMYEAR, CODE, TEAMID. Notice that it is ordering by TEAMID instead of POINTS as the order by clause specifies. However, if I copy the SQL statement and run it exactly as is in a new query window, it orders correctly as specified by the ORDER BY clause.

  Read the article

• Windows Server 2008 R2 File Permissions

  - by Fly_Trap

  I’m having some problems understanding some particular file permissions behaviour. Here are the steps to reproduce: Log into the server using the default Administrator account Create a text file (testfile.txt) in C:\ProgramData containing some arbitrary text Create a new user account and make it a member of the Administrators group Log in using new account and open C:\ProgramData\testfile.txt Edit the text and try to save Upon clicking save I’m presented with the save as dialog, which indicates that i do not have the necessary permissions to edit the file. This seems odd considering that the new user account is a member of Administrators. When I view the permissions of the file I can see the there are three groups listed, System, Administrators and Users. SYSTEM and Administrators have full permissions, however, Users only has the Read & Execute and Read permissions checked. It would appear that when I open the testfile.txt from the new users account, it opens in the context of the Users group, despite being a member of Administrators, is this correct? It would certainly explain the behaviour. The reason that this is an issue for me is that if I deploy an application via 'Run as Administrator', will normal users be able to edit the text files I install to ProgramData. Is this behaviour confined to Windows server or is it the same in Vista and Win7.

  Read the article

• WPF C# Client/Server announcement system

  - by manemawanna

  I'm currently in the process of creating an announcement system at my place of work. The role of this system will be to replace all users email due to people misusing it and generally abusing the facility. The system will consist of: Web Portal: Will allow staff to enter any important announcements (this will be restricted via AD). SQL Server 2k5 DB: Will hold the announcements along with records of staff members and if they've read the announcements etc. Front End: Created in WPF & C# which is nearly complete, it will display the announcements to the users. Web Page: Client will contact every so often, which will return an xml file for the client to read. However my boss has now shifted the goal posts and would like the announcements to appear to the user once they are written to the database, rather than waiting on the client to contact the webpage. So now I'm a bit unsure as to how to go about this. I have one idea where I would create a small server application to monitor for new announcements then contact the clients to inform them to approach the website for the information they need. But I'm just looking to see if theres a better or more efficient way to do this or if someone else has a more appropriate idea or suggestion.

  Read the article

• SQL Server race condition issue with range lock

  - by Freek

  I'm implementing a queue in SQL Server (please no discussions about this) and am running into a race condition issue. The T-SQL of interest is the following: set transaction isolation level serializable begin tran declare @RecordId int declare @CurrentTS datetime2 set @CurrentTS=CURRENT_TIMESTAMP select top 1 @RecordId=Id from QueuedImportJobs with (updlock) where Status=@Status and (LeaseTimeout is null or @CurrentTS>LeaseTimeout) order by Id asc if @@ROWCOUNT> 0 begin update QueuedImportJobs set LeaseTimeout = DATEADD(mi,5,@CurrentTS), LeaseTicket=newid() where Id=@RecordId select * from QueuedImportJobs where Id = @RecordId end commit tran RecordId is the PK and there is also an index on Status,LeaseTimeout. What I'm basically doing is select a record of which the lease happens to be expired, while simultaneously updating the lease time with 5 minutes and setting a new lease ticket. So the problem is that I'm getting deadlocks when I run this code in parallel using a couple of threads. I've debugged it up to the point where I found out that the update statement sometimes gets executing twice for the same record. Now, I was under the impression that the with (updlock) should prevent this (it also happens with xlock btw, not with tablockx). So it actually look like there is a RangeS-U and a RangeX-X lock on the same range of records, which ought to be impossible. So what am I missing? I'm thinking it might have something to do with the top 1 clause or that SQL Server does not know that where Id=@RecordId is actually in the locked range? Deadlock graph: Table schema (simplified):

  Read the article

• Best Practice: Protecting Personally Identifiable Data in a ASP.NET / SQL Server 2008 Environment

  - by William

  Thanks to a SQL injection vulnerability found last week, some of my recommendations are being investigated at work. We recently re-did an application which stores personally identifiable information whose disclosure could lead to identity theft. While we read some of the data on a regular basis, the restricted data we only need a couple of times a year and then only two employees need it. I've read up on SQL Server 2008's encryption function, but I'm not convinced that's the route I want to go. My problem ultimately boils down to the fact that we're either using symmetric keys or assymetric keys encrypted by a symmetric key. Thus it seems like a SQL injection attack could lead to a data leak. I realize permissions should prevent that, permissions should also prevent the leaking in the first place. It seems to me the better method would be to asymmetrically encrypt the data in the web application. Then store the private key offline and have a fat client that they can run the few times a year they need to access the restricted data so the data could be decrypted on the client. This way, if the server get compromised, we don't leak old data although depending on what they do we may leak future data. I think the big disadvantage is this would require re-writing the web application and creating a new fat application (to pull the restricted data). Due to the recent problem, I can probably get the time allocated, so now would be the proper time to make the recommendation. Do you have a better suggestion? Which method would you recommend? More importantly why?

  Read the article

• IPad SQLite Push and Pull Data from external MS SQL Server DB

  - by MattyD

  This carries on from my previous post (http://stackoverflow.com/questions/4182664/ipad-app-pull-and-push-relational-data). My plan is that when the ipad application starts I am going to pull data (config data i.e. Departments, Types etc etc relational data that is used across the system) from a webhosted MS SQL Server DB via a webservice and populate it into an SQL Lite DB on the IPad. Then when I load a listing I will pull the data over the line again via a webservice and populate it into the SQL Lite db on the ipad (than just run select commands to populate the listing). My questions are: 1. What is the most efficient way to transfer data across the line via the web? Everyone seems to do it a different way. My idea is that I will have a webService for each type of data pull (e.g. RetrieveContactListing) that will query the db and than convert that data into "something" to send across the line. My question really is what is the "something" that it should be converting into? 2. Everyone talks about odata services. Is this suited for applications where complex read and writes are needed? Ive created a simple iphone app before that talked to an sql server db (i just sent my own structured xml across the line) but now with this app the data calls are going to be a lot larger so efficiency is key.

  Read the article

• Server side aggregation using Spring MVC Controllers

  - by Venu

  Hi! We have a web site with multiple pages each with lot of AJAX calls. All the Ajax calls go to a data proxy layer written in Spring 3 MVC application. In order to reduce the load on the server we are planning to aggregate calls on the client and send to the proxy layer. For ex: we have two calls /controller1/action1 and /controller2/action2 in different controllers. I want to write an aggregate controller and call it from the client instead of making two calls to the individual controllers. Something like /aggregatecontroller/aggregate (and we will post the information regarding which calls are being aggregated and required parameters). Is there any way we can call another controller/action from a controller/action and get output? The flow will be something like this: a. Call /aggregatecontroller/aggregate with info regd call1 and call2 b. aggregate action understands that it needs to aggregate call1 and call2 c. it calls /controller1/action1 and gets the response d. it calls /controller2/action2 and gets the response e. it merges both in a json response and sends it back to browser. Please let me know if you have any suggestion regd how to do this or if you think there is a better approach to do the server side aggregation. Thanks for your time.

  Read the article

• Thumbnail image saved with worse quality on Windows Server 2003

  - by Angelo

  Hello, In asp.net 2.0 application I am trying to create thumbnails from uploaded images. However when I test the application on my PC under Windows7 it works fine, but on the real Windows 2003 Server the resized image has worse quality. Where this difference could come from? Different JPEG codec or what, if Yes how it can be updated on Win 2003 Server? Thanks! Here is the code: Resize of the Image: Bitmap newBmp = new Bitmap(imgWidth, imgHeight, PixelFormat.Format24bppRgb); newBmp.SetResolution(inputBmp.HorizontalResolution, inputBmp.VerticalResolution); //Create a graphics object attached to the new bitmap Graphics newBmpGraphics = Graphics.FromImage(newBmp); newBmpGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic; newBmpGraphics.SmoothingMode = SmoothingMode.HighQuality; newBmpGraphics.PixelOffsetMode = PixelOffsetMode.HighQuality; newBmpGraphics.DrawImage(inputBmp, new Rectangle(0, 0, imgWidth, imgHeight), new Rectangle(0, 0, inputBmp.Width, inputBmp.Height), GraphicsUnit.Pixel); Save of the Image: System.IO.Stream imgStream = new System.IO.MemoryStream(); //Get the ImageCodecInfo for the desired target format ImageCodecInfo destCodec = FindCodecForType(ImageMimeTypes.JPEG); if (destCodec == null) { //No codec available for that format throw new ArgumentException("The requested format image/jpeg does not have an available codec installed", "destFormat"); } //Create an EncoderParameters collection to contain the //parameters that control the dest format's encoder EncoderParameters destEncParams = new EncoderParameters(1); EncoderParameter qualityParam = new EncoderParameter(System.Drawing.Imaging.Encoder.Quality,(long)quality); destEncParams.Param[0] = qualityParam; //Save w/ the selected codec and encoder parameters inputBmp.Save(imgStream, destCodec, destEncParams); Bitmap destBitmap = new Bitmap(imgStream);

  Read the article

• Compiling a C++ application on Windows 7, but execute it on Win2003 Server

  - by dabs

  I have a C++ application (quite complex, multiple projects) in Visual Studio 2008, that produces a single dll. Recently I switched to Windows 7, but had previously been compiling under Windows XP. Suddenly the dll in question cannot be loaded by another application, i.e. on a machine running Windows 2003 Server. I've been trying various things: I've installed the VC9.0 redistributable package on the server Also copied various .dll's from that package to the application folder The project is of course compiled in release mode When I run depends.exe on the client machine, I do get the following error: "Error: The Side-by-Side configuration information for "my_dll.dll" contains errors. This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem (14001). Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module." and the icon for shlwapi.dll has a red overlay icon. This didn't happen when I was compiling under WinXP, so I'm guessing that there really is no problem with the .dll's on the client machine, but somewhere there is a reference to that particular version of some dll. Does anyone know what would be the best way to resolve this? Regards, Daníel

  Read the article

• How to run stored procedures and ad-hoc scripts asynchronously with "loosely" connected SQL Server 2

  - by sanga

  Is there a way to initiate a script against an instance of SQL server when it is not connected then have it run on the instance the next time it connects? This needs to happen without any intervention from me. Background situation if you are interested: We have about 120 machines each with their own instance of SQL Server 2000. Most of them are laptops. We have merge replication set up with each one. From time to time, there is a need to delete "rogue" guids from some tables in some instances that overwrite legitimate records on the main publisher as well as perform administrative tasks via stored procedure or adhoc sql statements. The problem is there is no telling when each machine is going to be connected to the network. Some folks turn their machines completely off at the end of the day. Others disconnect their machines and take them on business trips, home for the weekend etc. Did I mention that about 35 of these machines are in utility trucks and "attempt" to sync over a wireless connection. Thanks in advance for any assistance or suggestions. Sanga

  Read the article

• SQL Server find and replace in TEXT field

  - by incubushead

  I have a database in SQL Server 2005 that was brought up from SQL Server 2000 and is still using TEXT type fields instead of varchar(max). I need to find and replace a string of characters in the text field but all of the examples of how to do this that I have found don't seem like they would work for me. It seems the UPDATETEXT command requires that the two parameters "insert_offset" and "delete_length" be set explicitly but the string i am searching for could show up in the text at any point or even at several points in the same cell. My understanding of these two parameters is that the string im searching for will always be in the same place, so that insert_offset is the number of spaces into the text that the UPDATETEXT command will start replacing text. Example: Need to find: &lt;u&gt; and Replace it with: <u> Text field example: *Everyone in the room was <b>&lt;u&gt;tired&lt;/u&gt;.</b><br>Then they woke <b>&lt;u&gt;up&lt;/u&gt;. Can anyone help me out with this? THANKS!

  Read the article

• jquery dialog calls a server side method with button parameters

  - by Chiefy

  Hello all, I have a gridview control with delete asp:ImageButton for each row of the grid. What I would like is for a jquery dialog to pop up when a user clicks the delete button to ask if they are sure they want to delete it. So far I have the dialog coming up just fine, Ive got buttons on that dialog and I can make the buttons call server side methods but its getting the dialog to know the ID of the row that the user has selected and then passing that to the server side code. The button in the page row is currently just an 'a' tag with the id 'dialog_link'. The jquery on the page looks like this: $("button").button(); $("#DeleteButton").click(function () { $.ajax({ type: "POST", url: "ManageUsers.aspx/DeleteUser", data: "{}", contentType: "application/json; charset=utf-8", dataType: "json", success: function (msg) { // Replace the div's content with the page method's return. $("#DeleteButton").text(msg.d); } }); }); // Dialog $('#dialog').dialog({ autoOpen: false, width: 400, modal: true, bgiframe: true }); // Dialog Link $('#dialog_link').click(function () { $('#dialog').dialog('open'); return false; }); The dialog itself is just a set of 'div' tags. Ive thought of lots of different ways of doing this (parameter passing, session variable etc...) but cant figure out how to get any of them working. Any ideas are most welcome As always, thanks in advance to those who contribute.

  Read the article

• Managing modes in Windows application working directly with SQL Server 2008

  - by hgulyan

  Hi, I have a MS Access 97 application (but the question is general) working directly with SQL Server 2008 (without application server or anything). Numbers of users can be up to 1000. Windows Authentication is used. The question is: How to handle modes, so some users will be allowed to work in read-only mode some users won't have access to db for some time My versions: Using a table with a mode id for every group of users, that will work the same way. On Form Load application will query that table for mode id. Using trigger on the tables, that must work according to that mode. The trigger will query mode value and doesn't work if access is closed or it's in read-only mode I know it's not these are not the best solutions, that's why I'm asking for your advice. There's one more point. If the mode is changed to "access-is-closed" for a group of users, that group must not be able to query to DB starting that moment. With first solution I wrote it won't work, because user can be in application at that moment and no form load event will work. How can I do this? Is there any optimal solution? Thank you. Any help would be appreciated.

  Read the article

• Give Access to a Subdirectory Without Giving Access to Parent Directories

  - by allquixotic

  I have a scenario involving a Windows file server where the "owner" wants to dole out permissions to a group of users of the following sort: \\server\dir1\dir2\dir3: Read & Execute and Write \\server\dir1\dir2: No permissions. \\server\dir1: No permissions. \\server: Read & Execute To my understanding, it is not possible to do this because Read & Execute permission must be granted to all the parent directories in a directory chain in order for the operating system to be able to "see" the child directories and get to them. Without this permission, you can't even obtain the security context token when trying to access the nested directory, even if you have full access to the subdirectory. We are looking for ways to get around this, without moving the data from \\server\dir1\dir2\dir3 to \\server\dir4. One workaround I thought of, but which I am not sure if it will work, is creating some sort of link or junction \\server\dir4 which is a reference to \\server\dir1\dir2\dir3. I am not sure which of the available options (if any) would work for this purpose if the user does not have Read & Execute permission on \\server\dir1\dir2 or \\server\dir1, but as far as I know, the options are these: NTFS Symbolic Link, Junction, Hard Link. So the questions: Are any of these methods suitable to accomplish my goal? Are there any other methods of linking or indirectly referencing a directory, which I haven't listed above, which might be suitable? Are there any direct solutions that don't involve granting Read & Execute to \\server\dir1 or \\server\dir2 but still allowing access to \\server\dir1\dir2\dir3?

  Read the article

• Generating the query plan takes 5 minutes, the query itself runs in milliseconds. What's up?

  - by TheImirOfGroofunkistan

  I have a fairly complex (or ugly depending on how you look at it) stored procedure running on SQL Server 2008. It bases a lot of the logic on a view that has a pk table and a fk table. The fk table is left joined to the pk table slightly more than 30 times (the fk table has a poor design - it uses name value pairs that I need to flatten out. Unfortunately, it's 3rd party and I cannot change it). Anyway, it had been running fine for weeks until I periodically noticed a run that would take 3-5 minutes. It turns out that this is the time it takes to generate the query plan. Once the query plan exists and is cached, the stored procedure itself runs very efficiently. Things run smoothly until there is a reason to regenerate and cache the query plan again. Has anyone seen this? Why does it take so long to generate the plan? Are there ways to make it come up with a plan faster?

  Read the article

• How to configure replication? - This database is not enabled for publication.

  - by truthseeker

  Hi, I'm trying to configure repication on SQL Server 2005. I can done it using wizard. But when I'm trying to run generated scripts by this wizard the error message appears: Msg 14013, Level 16, State 1, Procedure sp_MSrepl_addpublication, Line 159 This database is not enabled for publication. Msg 18757, Level 16, State 1, Procedure sp_MSrepl_addpublication_snapshot, Line 66 Unable to execute procedure. The database is not published. Execute the procedure in a database that is published for replication. Msg 14013, Level 16, State 1, Procedure sp_MSrepl_addarticle, Line 168 This database is not enabled for publication. Msg 14294, Level 16, State 1, Procedure sp_verify_job_identifiers, Line 25 Supply either @job_id or @job_name to identify the job. It's a bit strange, because when I'm running this query on database where I clicked and then removed publication, everyting is going well. The problem is when I'm using my query on new database. What is more I'm using sp_replicationdboption stored procedure. When I'm tryin to run it, it says: The replication option 'publish' of database 'ReplicationTest00' has already been set to true. Please help me resolve this issue.

  Read the article

• Cascading Deletes in SQL Sever 2008 not working.

  - by Vaccano

  I have the following table setup. Bag | +-> BagID (Guid) +-> BagNumber (Int) BagCommentRelation | +-> BagID (Int) +-> CommentID (Guid) BagComment | +-> CommentID (Guid) +-> Text (varchar(200)) BagCommentRelation has Foreign Keys to Bag and BagComment. So, I turned on cascading deletes for both those Foreign Keys, but when I delete a bag, it does not delete the Comment row. Do need to break out a trigger for this? Or am I missing something? (I am using SQL Server 2008) Note: Posting requested SQL. This is the defintion of the BagCommentRelation table. (I had the type of the bagID wrong (I thought it was a guid but it is an int).) CREATE TABLE [dbo].[Bag_CommentRelation]( [Id] [int] IDENTITY(1,1) NOT NULL, [BagId] [int] NOT NULL, [Sequence] [int] NOT NULL, [CommentId] [int] NOT NULL, CONSTRAINT [PK_Bag_CommentRelation] PRIMARY KEY CLUSTERED ( [BagId] ASC, [Sequence] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Bag_CommentRelation] WITH CHECK ADD CONSTRAINT [FK_Bag_CommentRelation_Bag] FOREIGN KEY([BagId]) REFERENCES [dbo].[Bag] ([Id]) ON DELETE CASCADE GO ALTER TABLE [dbo].[Bag_CommentRelation] CHECK CONSTRAINT [FK_Bag_CommentRelation_Bag] GO ALTER TABLE [dbo].[Bag_CommentRelation] WITH CHECK ADD CONSTRAINT [FK_Bag_CommentRelation_Comment] FOREIGN KEY([CommentId]) REFERENCES [dbo].[Comment] ([CommentId]) ON DELETE CASCADE GO ALTER TABLE [dbo].[Bag_CommentRelation] CHECK CONSTRAINT [FK_Bag_CommentRelation_Comment] GO The row in this table deletes but the row in the comment table does not.

  Read the article

• Generating the SQL query plan takes 5 minutes, the query itself runs in milliseconds. What's up?

  - by TheImirOfGroofunkistan

  I have a fairly complex (or ugly depending on how you look at it) stored procedure running on SQL Server 2008. It bases a lot of the logic on a view that has a pk table and a fk table. The fk table is left joined to the pk table slightly more than 30 times (the fk table has a poor design - it uses name value pairs that I need to flatten out. Unfortunately, it's 3rd party and I cannot change it). Anyway, it had been running fine for weeks until I periodically noticed a run that would take 3-5 minutes. It turns out that this is the time it takes to generate the query plan. Once the query plan exists and is cached, the stored procedure itself runs very efficiently. Things run smoothly until there is a reason to regenerate and cache the query plan again. Has anyone seen this? Why does it take so long to generate the plan? Are there ways to make it come up with a plan faster?

  Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >