Search Results

Search found 8935 results on 358 pages for 'mad vs'.

Page 306/358 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• Copying windows home server backup offsite

  - by Simon

  What ways are there to copy a windows home server backup to an offsite location? I'm talking specifically (and only) about the automated backup of my entire machine, and not the shared network folders. I am 90% working away from home on my laptop which has a 640GB drive so the shared folders are essentially useless to me. I backup every night, but if my house burns down or broken into the I'm in serious serious trouble ! I'm really looking for some alternative way to back up my entire machine - which much not interfere with the reliability or speed by which my WHS backs up my laptop every night. Either a way to 'export' a complete machine backup from the server, or recommendations on non-conflicting software I can backup to a 1TB drive at work are what I'm looking for. Note: I believe that WHS uses its own completely proprietary backup and doesn't use things like any 'backup bit' or 'archive bit'. I just dont want to install some other backup software that will conflict. PS I'm now running Windows 7 and just realized that I should probably check out the backup functionality it gives me. I assume that won't conflict right! Edit: Thanks for the hosted solutions. I'd also appreciate ways to backup to an 'offsite' location that I control - like my office vs. my home. The hosted solutions I think will be too slow or expensive for my needs.

  Read the article

• Weird problem with Visual C++ 2010 Express

  - by Robert Vella

  This has happened before on my Vista Premium installation, and now it's happening on my Windows 7 Home Premium installation. Basically everytime I install Visual Studio Express 2010, it works fine for a random amount of time but then suddenly starts to hide from my sight -- that's the best way I can explain it. VS does not crash, and from what I can tell it does not freeze either; It continues to work, I can even "minimize" and "maximize" it; I simply cannot see it nor can I interact with it any meaningful way. Also: After the "crash" there are no logs in: Root\Program Files (x86)\Microsoft Visual Studio 10.0\Microsoft Visual C++ 2010 Express - ENU. Nor any other files created at the time of the crash. There are no traces in the event viewer. The program seems to be functioning perfectly in the process manager. If I reinstall Visual C++, it works normally for a seemingly random period of time before going cookoo again. I am stumped. This has never happened to me before, with any other program. And yet I doubt it really is a problem with Visual C++; More like something general that seems to have picked on it for some reason. Still, after a clean install with a new OS, I'm kinda thinking there's something wrong here. Any help would be appreciated, altough I suspect that the answer to this question will make me feel embarassed. P.S. Not sure if it helps, but I think around the same time I started having problems (On both installations) with windows turning off the display when I leave the computer, and then seemingly crashing when it turns it on again -- in fact when I interact with it it seems to be responding to my commands without actually display anything.

  Read the article

• Best grep-like tool

  - by e-satis

  I do in file search a lot, and used to love grep. Then I learn the existence of egrep, so I switched to benefit from the advanced regexp. Then I discovered the Eclipse search tool. Much easier to use that grep. Then I found ack : fast, easy, powerful. And now I use grin, which is smooth for pythonistas. I know there is also a couple of this kind of tools with a GUI. So what tool do you use, and why do you think it's the best. Practical features generally are : fast to fire and use; speedy processing; automatically ignore useless files; colored output; output lines, filename, context; allow complex regexp; allow a custom filtering and ouput; GUI + command line intergation; let you open an editor from the result set. There are some related posts on SO : http://stackoverflow.com/questions/87350/what-are-good-grep-tool-for-windows http://stackoverflow.com/questions/981601/colorized-grep-viewing-the-entire-file-with-highlighting http://stackoverflow.com/questions/1028107/is-there-some-unix-util-that-will-allow-me-to-grep-multiple-files-with-little-type http://stackoverflow.com/questions/1027906/unix-find-grep-syntax-vs-awk

  Read the article

• Windows 7 access denied to executables.. by what?

  - by stijn

  Ever since I started using Windows 7 this problem has been bothering me. From time to time I see similar questions popping up on misc forums, but never did I see an answer. Here are two scenarios that nearly always reproduce it: the explorer way with explorer, navigate to a directory containing at least one exe file go one directory up immediately delete the directory just navigated to yields Folder Acces Denied dialog stating You need permission to perform this action You require permission from Administrators to make changes to this folder, with the buttons try Again and Cancel hitting Try Again never works immediately. Waiting a minute or so and then clickig it again does work note: if in step 2 and waiting a minute or more before going up one directory, the problem does not occur and the folder can be deleted the visual studio way build a project producing an exe file run the executable then close it immediately build the project again (by changing a single character in a source file for example) yields fatal error LNK1168: cannot open /path/to/the.exe for writing note: if in step 2 and waiting a minute or more before building again, the problem does not occur some specs happens both on Windows 7 32 and 64 bit, with VS2008/2010/2011 happens on 3 different machines I do not have a virusscanner of any kind I do have a bunch of services disabled, but nothing that prevents Windows from running normally, UAC is disabled as well happens on any type of disc I always use a user account that is in the Administrators group Obviously both scenarios are very similar and extremely reproducable. So I figured some process must have the file open for some reason, and release it again later. However, using systinternal's handle -a the exe file in question never shows up. (that is the correct way to use handle, right?) So while explorer/VS are reporting they cannot access the file, handle.exe says it's not in use anywhere. This leaves me rather clueless, so I'm wondering if someone can come up with a solution: why does this happen, and how to solve it?

  Read the article

• Server 2003 and SSL Certificates

  - by Keith Stokes

  I have a Windows 2000 domain with dozens of Windows 2000 servers and a few 2003 servers. Each server runs a custom app talking to a 3rd party utilizing self-signed certificates. To help troubleshooting we've created a custom test app. The 2000 servers are able to talk within seconds. The 2003 servers take anywhere from 10-30 seconds using a domain account and much less, usually under 5 seconds using a local account. The only exception to the local account performance is a new account, which is slow initially then faster. If you leave the test app open and reconnect repeatedly it talks in seconds. If you leave it open for sometime between 1 and 2 hours, it reverts back to the previous 10 seconds, so obviously something is caching. Installing the destination certificates in the local 2003 server store makes no difference. I've installed the certificates in AD and that apparently makes domain accounts work in 9-12 seconds, vs 30 seconds that was regular before. Manually clearing the certificate store on the 2003 server makes no difference. I'm at a loss as to where the certs might be cached and if I'm using some sort of domain certificate store that's hiding from me.

  Read the article

• Problem mirroring two monitors with different resolution

  - by quad

  Hello I am trying to put two monitors in mirror mode (Windows 7 Professional) with Ultramon 3.1.0. The two monitors: Main monitor: 24" Asus. 1680x1050 resolution (16/10). Secondary monitor: 19" LG. 1280x1024 resolution. The graphic card is a Nvidia GeForce 8600 GT. I have installed the Ultramon 3.1.0 and I have created a mirror, with the "stretch mirror image to fill monitor" and the "disable video overlays and 3D acceleration". When I start the mirroring, there are two zones in the lateral edges that are not displayed in the second monitor. I think this is because the width of the main monitor is 1680 px. and the width of the secondary monitor is 1280 px., but I have indicated "stretch mirror image to fill monitor" in the options. The same occurs in the top and the bottom edges, but the diference is minimal (1050 vs 1024 pixels). I want the same image (distortioned in the secondary monitor if is neccesary), but I don't know what is failing. Someone can help me, please? I have read Mirrored monitors of different resolution. Cloned screen on monitors with different resolutions

  Read the article

• Fedora 14 update probelem

  - by Marko

  How is everybody doin? :) Im having this problem with Fedora 14 update for last couple of weeks.. when I run yum update I get the following result: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: kernel-uname-r = 2.6.32.10-90.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-1:195.36.15-1.fc12.1.i686 kernel-uname-r = 2.6.32.16-150.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-1:195.36.31-1.fc12.2.i686 kernel-uname-r = 2.6.32.21-168.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-1:195.36.31-1.fc12.5.i686 kernel-uname-r = 2.6.32.10-90.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-1:195.36.15-1.fc12.1.i686 kernel-uname-r = 2.6.32.16-150.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-1:195.36.31-1.fc12.2.i686 kernel-uname-r = 2.6.32.21-168.fc12.i686.PAE is needed by (installed) kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-1:195.36.31-1.fc12.5.i686 Please report this error in http://yum.baseurl.org/report ** Found 9 pre-existing rpmdb problem(s), 'yum check' output follows: VirtualBox-3.2-3.2.10_66523_fedora13-1.i686 has missing requires of libpython2.6.so.1.0 VirtualBox-3.2-3.2.10_66523_fedora13-1.i686 has missing requires of python(abi) = ('0', '2.6', None) 1:kmod-nvidia-2.6.32.10-90.fc12.i686.PAE-195.36.15-1.fc12.1.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.10', '90.fc12.i686.PAE') 1:kmod-nvidia-2.6.32.16-150.fc12.i686.PAE-195.36.31-1.fc12.2.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.16', '150.fc12.i686.PAE') 1:kmod-nvidia-2.6.32.21-168.fc12.i686.PAE-195.36.31-1.fc12.5.i686 has missing requires of kernel-uname-r = ('0', '2.6.32.21', '168.fc12.i686.PAE') mysql-workbench-gpl-5.2.28-1fc13.i386 has missing requires of libpython2.6.so.1.0 pysvn-1.7.2-1.fc13.i686 has missing requires of python(abi) = ('0', '2.6', None) system-config-display-2.2-1.fc12.i686 has missing requires of libpython2.6.so.1.0 system-config-display-2.2-1.fc12.i686 has missing requires of python(abi) = ('0', '2.6', None) does anybody have a similar issue?

  Read the article

• Suggestions for Backup solution

  - by jiewmeng

  i am considering between windows home server simple nas extra HDD's in desktop btw, i will be the main user i am looking to fulfil the following needs: reliability (i am think RAID 1 or 5) not so prone to virus/malware infections (will using a separate NAS or home server help? say windows home server is still a windows pc except separated by network?) power efficiency (eg. spin down when not in use) download (eg. i may want to dl big files/torrents overnight and i may not want to use a full powered PC for it? does a full pc vs NAS provide significant power usage to justify cost of new system esp. since i am only user?) performance (i guess i like to write/access my files fast, on 2nd thought, maybe for backup i can forgo this? maybe for a WD Green HDD? but how much slower will it be? plus since i am the only user, i think the whole HDD will be mine?)

  Read the article

• Connection between Asp.Net and Oracle 10g Express Edition

  - by l3gion

  Hello, I'm struggling to find a way to connect my Asp .Net + C# application with my Oracle 10g Express Edition. Here's my scenario, I'm at Mac OS and I have 2 Virtual machines, one for Win 7 (VS 2010 app) and another with a Parallels Virtual Appliance with Oracle 10g Express Edition 1.1. Which provider (Oledb, ODP.NET, etc..) should I use? How to make the connection to the server in C#? Right now I have this: <appSettings> <add key="conn" value="Data Source=10.211.55.11;Persist Security Info=True;User ID=l3gion;Password=l3gion;" /> </appSettings> And at the .cs file: SqlCommand cmd = new SqlCommand("insert_thing", new SqlConnection(ConfigurationManager.AppSettings["conn"])); cmd.CommandType = CommandType.StoredProcedure; *insert_thing is a stored procedure Using this I got this error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I've searched for some possible solutions. Tried some, including: firewall disabled, allow remote connection at oracle express edition using this cmd line ("EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);").. The error persists. Can anyone guide me into the right direction? I'm a newbie with this type of things. Thank you for your patience. regards

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• Equivalent of scp -l bandwidth_cap for .ssh/config?

  - by Mark Bennett

  Short form: You can limit the bandwidth the scp uses with the -l switch, you pass a number that's in kbits/sec. I'd rather set this in my .ssh/config file for certain names machines. What's the equivalent named setting for -l ? I haven't been able to find it. Followup question: Generally, not sure how to map back and forth between ssh command line options and config names, short of doing Google searches or manually comparing man pages on a case by case basis. Is there a table that directly equates the two? Longer form of first question, with context: I've started using ssh config quite a bit, especially now that I need to go through a proxy and do lots of port mappings. I even define the same machine more than once depending on what type of tunneling I need. However, when uploading a large file, it's difficult to do anything else on my machine. Even though I have more download bandwidth than up, I think that scp saturates the link so even my small requests can't reach the Internet. There's a fix for this, using the -l bandwidth command line switch for scp. scp -l 1000 bigfile.zip titan: I'd like to use this in my config instead, so I'd create an additional named entry called "titan-upload" and I'd use that as the target whenever I upload. So instead of: scp bigfile.zip titan: I'd say: scp bigfile.zip titan-upload Or even set different caps depending on where I am: scp bigfile.zip titan-upload-from-home vs. scp bigfile.zip titan-upload-from-work I'm generally on Mac and Linux.

  Read the article

• SQL Server Unattended Install through SSH

  - by Samuel

  I'm trying to install SQL Server from the command line through Cygwin open-ssh. The install works when I log onto the server as Administrator and execute the script through a Cygwin shell, but the install doesn't work when I SSH into the machine using Administrator's credentials and run the exact same command. I've already verified that the SSHD process is running as the Admistrator, and I've verified that the install script is indeed starting under Administrator. Is there something different with the terminal in SSH vs. the Cygwin terminal on the machine that would cause this problem? Specifically what's failing is Sql Server install runs for a while then hangs with a MSI error 1622. "Error opening installation log file. Verify that the specified log file location exists and is writable." If I run both installs, I've noticed that they have different authentication id's in ProcMon, but they have the exact same command line parameters. There has to be something in SSH that is causing permissions issues... Any ideas?

  Read the article

• Ruby installed on Ubuntu 10.10 slow on one machine but not other

  - by Aaron Jensen

  I have a machine that was provisioned several months ago. RVM was used to install ruby 1.9.3-p125 as well as 1.9.3-p125-perf. When I compared raw ruby performance to another identical machine the older machine smoked them. For example: ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 3.790000 0.000000 3.790000 ( 3.800895) each 2.410000 0.000000 2.410000 ( 2.420860) any 3.960000 0.000000 3.960000 ( 3.972099) include 1.440000 0.000000 1.440000 ( 1.442862) ------------------------------------ total: 11.600000sec vs ================================================================================ With in-block needle calculation ================================================================================ Rehearsal ---------------------------------------------- detect 10.740000 0.000000 10.740000 ( 10.769366) each 6.080000 0.010000 6.090000 ( 6.106323) any 10.600000 0.000000 10.600000 ( 10.641606) include 4.160000 0.000000 4.160000 ( 4.171530) ------------------------------------ total: 31.590000sec I attempted to reinstall 1.9.3-p125 with rvm on the fast machine and that ruby is now slow. It's as if something changed in RVM, or I installed some package that made compiled versions of ruby perform significantly worse. I know this is a tough question to answer, but what things should I look into in order to track down why the performance has suffered so much? edit I just attempted to install with ruby-build and the version installed was fast. Something rvm is doing to build it in my environment is slow.

  Read the article

• Is there a utility to visualise / isolate and watch application calls

  - by MyStream

  Note: I'm not sure what to search for so guidance on that may be just as valuable as an answer. I'm looking for a way to visually compare activity of two applications (in this case a webserver with php communicating with the system or mysql or network devices, etc) such that I can compare the performance at a glance. I know there are tools to generate data dumps from benchmarks for apache and some available for php for tracing that you can dump and analyse but what I'm looking for is something that can report performance metrics visually from data on calls (what called what, how long did it take, how much memory did it consume, how can that be represented visually in a call stack) and present it graphically as if it were a topology or layered visual with different elements of system calls occupying different layers. A typical visual may consist of (e.g. using swim diagrams as just one analogy): Network (details here relevant to network diagnostics) | ^ back out v | Linux (details here related to firewall/routing diagnostics) ^ back to network | | V ^ back to system Apache (details here related to web request) | | ^ response to V | apache PHP (etc) PHP---------->other accesses to php files/resources----- | ^ v | MySQL (total time) MySQL | ^ V | Each call listed + time + tables hit/record returned My aim would be to be able to 'inspect' a request/range of requests over a period of time to see what constituted the activity at that point in time and trace it from beginning to end as a diagnostic tool. Is there any such work in this direction? I realise it would be intensive on the server, but the intention is to benchmark and analyse processes against each other for both educational and professional reasons and a visual aid is a great eye-opener compared to raw statistics or dozens of discrete activity vs time graphs. It's hard to show the full cycle. Any pointers welcome. Thanks! FROM COMMENTS: > XHProf in conjunction with other programs such as Perconna toolkit > (percona.com/doc/percona-toolkit/2.0/pt-pmp.html) for mySQL run apache > with httpd -X & (Single threaded debug mode and background) then > attach with strace -> kcache grind

  Read the article

• Update Grub on Squeeze - Kernel downgrade due VMware Server

  - by vodoo_boot

  I happen to run into various problems regarding grub and kernels. I don't really care about the kernel internas. All I want is VMware server in that dedicated root-server. 1.) What is a bzImage vs. vmlinuz? kaze:~# ls /boot/ System.map-2.6.32-5-amd64 bzImage-2.6.33.2 config-2.6.33.2 initrd.img-2.6.32-5-amd64 System.map-2.6.33.2 bzImage-2.6.35.6 config-2.6.35.6 vmlinuz-2.6.32-5-amd64 System.map-2.6.35.6 config-2.6.32-5-amd64 grub I updated my menu.lst (grub2): timeout 5 default 0 fallback 1 title 2.6.32.5 kernel (hd0,1)/boot/vmlinuz-2.6.32-5-amd64 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.35.6 kernel (hd0,1)/boot//bzImage-2.6.35.6 root=/dev/sda2 panic=60 noapic acpi=off title 2.6.32.3 kernel (hd0,1)/boot//bzImage-2.6.33.2 root=/dev/sda2 panic=60 noapic acpi=off That doesn't do well... I think the vmlinuz file is missing initrd or so. Dunno. In fact I don't give too much about kernel boot voodoo as long as it works. update-grub(2) does not work. Does anybody know what magical trick there is to get the 2.6.32-5 booting? 2.) I thought t follow the Deban wiki.. I cannot get header-files for the installed 35.6 or 33.2 kernel in the repositories. I cannot build foreign headers because they will not match the running kernel. So how does one deal with that situtation? I'd prefer not to have to downgrade the kernel. Thanks for any answers!

  Read the article

• IIS 7 much slower than IIS 6

  - by JoeJoe

  I have a asp.net 3.5 web application running fine on Windows2003 IIS6. I published same exact application to IIS7.5 (Win2008R2) on a faster box (i5,8Gram) and it is significantly slower. 5-6 sec per page vs. 1-2 sec per page. During that time the Task Mgr CPU is always under 10%. Both attach to same database on other box. Benchmark is consistent from any other client browser or machine. I have connection pool on both, compression on both. Same network subnet. Forms authentication (no SSL yet). Can you give me steps on how to troubleshoot where the delays are being inserted or settings in IIS7 that I may have overlooked. Just using defaults. There is only 1 web site on each box. I understand the roles of an Application as defined in IIS has changed. There is no special Application defined in IIS.

  Read the article

• What user information is exposed via a browser?

  - by ipso

  Is there a function or website that can collect and display ALL of the user information that can be obtained via a browser? Background: This of course does not account for the significant cross-reference abilities of large corporations to collate multiple sources and signals from users across various properties, but it's a first step. Ghostery is just a great idea; to show people all of the surreptitious scripts that run on any given website. But what information is available – what is the total set of values stored – that those scripts can collect from? If you login to a search engine and stay logged in but leave their tab, is that company still collecting your webpage viewing and activity from other tabs? Can past or future inputs to pages be captured – say comments on another website? What types of activities are stored as variables in the browser app that can be collected? This is surely a highly complex question, given to countless user scenarios – but my whole point is to be able to cut through all that – and just show the total set of data available at any given point in time. Then you can A/B test and see what is available with in a fresh session with one tab open vs. the same webpage but with 12 tabs open, and a full day of history to boot. (Latest Firefox & Chrome – on Win7, Win8 or Mint13 – although I'd like to think that won't make too much of a difference. Make assumptions. Simple is better.)

  Read the article

• Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

  - by Jessica

  I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

  Read the article

• How do I tell Windows to use 802.11 in preference to 3G?

  - by Jon Skeet

  I have a Samsung NC-10 netbook which I take to work every day. Most of the time I use it just on the train/bus, but I also use it at work and home. It has a built-in 3G card which I want to use when travelling, but I'd prefer to use wifi when I'm at work or home, for obvious reasons. Unfortunately, if the 3G connection is up, Windows appears to use that in preference to wifi. Starting up and shutting down the 3G modem is a bit of a pain - it's not hard as such, just a bit inconvenient. Ideally I'd like it to always be up, and even have the connection itself up all the time, but without routing traffic through it if there's a wifi connection up. This is what my Android phone does, for example. Is there somewhere in Windows which lets me express an ordering for network interfaces? I suspect the routing table may be relevant, but it's a bit of a pain to mess around with. I'd really expect there to be a simple GUI way of setting this up - after all, it would equally be useful when dealing with wired vs wifi connections. I'm currently using Windows XP Home, but Windows 7 answers would also be useful as I'll be migrating soon.

  Read the article

• Ram configuration 4x4 or 2x8?

  - by Carl B

  I am looking to upgrade my Ram to 16gigs and I am wondering if there is any distinct advantage of the way I do it. That being a 4x4 or 2x8 set up. In all my searching there have been a number of pros for each profile. I can find no benchmarck results for either setup as a compaison. So, if there are 2 profiles of the same speed, same voltage, same timing and same cas what would perform better or have a better over all benafit? A few examples from my search - a 4x4 set would lend a benafit in that if one stick failed, you only lose 25% of your Ram vs 50% in a 2x8 set up. a 2x8 set up would have less strain on the memory controler and motherboard. a 2x8 would generate less heat. a 2x8 set up is easier to over clock (not part of my need, but alot of the comparisons circled around the overclocability ease of the 2 stick set up). There is one outstanding benafit that I have found in at least the target company I have looked at and that is price. The 2x8 is nearly half the cost. My motherboard supports a max of 16 gigs and I have a 64 bit OS. Has anyone seen any performance comparisons or is 16 gb just 16 gb no matter how you slice it? And is there any merit to the above pros? Edit: as per the mobo specs - Main Memory • Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max

  Read the article

• What needs to be considered when setting up for Linux Development? [closed]

  - by user123586

  I want to set up a box for Linux development. I have a working linux install with the usual toolchain and an IDE. I'm looking for advice on how to approach structuring accounts and folders for development. As the Perl folks say "There's always more than one way to do it." Left to my own devices, I'll come up with several unproductive ways of doing it before figuring out what an experienced Linux programmer would think obvious. I'm not looking for instructions to follow for a specific set of tools or a specific software package. Instead, I'm looking for insight into what decisions need to be made and how to make them, with understanding of the advantages and disadvantages of each individual choice. These are some of the questions that come up: Where to put sources Where to put built object files and libraries where to install what to set in environment variables what compiler flags matter and how do you manage them across several types of builds what configuration entries to make in an IDE how to manage libraries to support multiple environments how to handle different build versions such as debug vs release, or cross platform builds If you are an experienced Linux developer, the answers to these questions may seem trivial and obvious. I'd like to learn to make decisions about these questions that result in as little manual configuration as possible, given some existing sources, a particular IDE, or no IDE at all, a paticular set of development libraries etc. At this point you're probably thinking: Can you be more specific? Sure. But remember that I'm trying to learn how to think about this stuff, not just follow a recipie for a specific set of results. Example: Setup a project that uses CMake for some of its components, autogen.sh followed by configure for others and just configure for a few more: debug builds without an IDE debug builds in NetBeans debug builds in Eclipse debug build in Visual Studio all of the above with release builds for Linux, Mac and Windows. So... **What are your thoughts on an approach that works for all four? Do you have any advice on what to read?**

  Read the article

• Throughput and why do ISPs sell too much bandwidth?

  - by jonescb

  I hope the question made sense how I worded it. :) I've been wondering, maximum theoretical bandwidth is measured as RWIN/RTT (Window size / round trip time) Source 1 and Souce 2 So if a major city only 100 miles away gives me a ping of 50ms, and I have the default 64kb TCP window size then my maximum throughput will be 12.5Mb/s. Everything further away would give me a higher ping and therefore a lower throughput. Is there any reason to buy something like FiOS with a 50Mb/s or greater connection? Will you ever be able to reach that kind of speed? I know you can increase the TCP window size to increase throughput, but it has to be at both ends which is a deal breaker because you can't control the server. I'm assuming other network protocols like UDP aren't quite as affected by latency as TCP is, but how much of overall network traffic does non-TCP make up vs TCP. Am I just misguided about how throughput works? But if the above is correct, then why should a consumer like me buy way more bandwidth than can be realistically used. Maybe the only reason is for downloading multiple things at once, or one thing from multiple servers/peers?

  Read the article

• Scaling a node.js application, nginx as a base server, but varnish or redis for caching?

  - by AntelopeSalad

  I'm not close to being well versed in using nginx or varnish but this is my setup at the moment. I have a node.js server running which is serving either json, html templates, or socket.io events. Then I have nginx running in front of node which is serving all static content (css, js, etc.). At this point I would like to cache both static content and dynamic content to memory. It's to my understanding that varnish can cache static content quite well and it wouldn't require touching my application code. I also think it's capable of caching dynamic content too but there cannot be any cookie headers? I do use redis at the moment for holding session data and planned to use it for other things in the future like keeping track of non-crucial but fun stats. I just have no idea how I should handle caching everything on the site. I think it comes down to these options but there might be more: Throw varnish in front of nginx and let varnish cache static pages, no app code changes. Redis would cache dynamic db calls which would require modifying my app code. Ignore using varnish completely and let redis handle caching everything, then use one of the nginx-redis modules. I'm not sure if this would require a lot of app code changes (for the static files). I'm not having any luck finding benchmarks that compare nginx+varnish vs nginx+redis and I'm too inexperienced to bench it myself (high chances of my configs being awful). I'm basically looking for the solution that would be the most efficient in terms of req/sec and scalable in the future (throw new hardware at the problem + maybe adjust some values in a config = new servers up and running semi-painlessly).

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >