Search Results

Search found 93962 results on 3759 pages for 'server configuration'.

Page 306/3759 | < Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >

• How to set up port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

  - by mairtinh

  The basic situation that I have is a dedicated server running CentOS 5.4 At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running. The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding. Here's what I've tried so far. The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.) First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest. Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside. I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 . I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

  Read the article

• Lync using SQL 2008 R2 SP1 - Publish Topology error

  - by EKS

  Error that shows in the web page opened by the Topology builder: Error: An error occurred: "Microsoft.Rtc.Common.Data.SqlConnectionException" "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" Looking in the log file: ( I assume this is the acutal error making it STOP) Installed SQL Server 2005 Backward Compatibility version is 8.05.1054 Error: SQL Server 2005 Backward Compatibility is not installed or its version is not high enough. SQL Server 2005 Backward Compatability SP2 or higher must be installed. I have installed SQLServer2005_BC_x64.msi from MS, and cant seem to find this SP2 version. SQL server is a 2008 R2 SP1. I have also tested with a 2008 SP3 SQL server same error. Named pippes output via ( OSQL /L) SQL-2008-1 SQL2

  Read the article

• Problem in Installing Wordpress

  - by Hajloo

  I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. I had tostop installation process 3 time and installing PHP and mysql Extention manually. but everytime I continue setup by WebPi andfinally it show me a success message. But when I try to see installed wordpress in my client I see this Your PHP installation appears to be missing the MySQL extension which is required by WordPress. I asked it in StackOverFlow here but I couln't get the right answer. I install everything in **C:\Program files\** so these are the location C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\Php C:\Program Files\ext mysql root password: admin wordpress database : wordpress wordpress database password : 123 here is my php.ini

  Read the article

• Asterisk Connection not working

  - by Tamas Ionut

  I have installed Asterisk on VirtualBox by following the steps from here. Everything went ok until I got to navigate to an IP to configure Asterisk using FreePBX: 10.0.2.15 (Shouldn't be something like 192.168.x.y?? ). However, when I navigated to that url from outside of VirtualBox, that url pointed to nothing. Also I am logged in as root@localhost. Should I be logged in as root@server? I have also validated the installation as described here and everything went well. I am a complete beginner at Asterisk.

  Read the article

• yum list installed including version of all installed packages CentOS 5.4

  - by Andy

  I have a list of packages installed with yum on CentOS 5.4 [root@server ~]# yum list installed ... Installed Packages GConf2.x86_64 2.14.0-9.el5 installed ImageMagick.x86_64 6.2.8.0-4.el5_1.1 installed MAKEDEV.x86_64 3.23-1.2 installed MySQL-python.x86_64 1.2.1-1 installed I would like to download these rpms locally using yumdownloader --resolve MySQL-python-1.2.1-1.x86_64 etc. However the package formatting is different (MySQL-python.x86_64 1.2.1-1 vs MySQL-python-1.2.1-1.x86_64) so I am unable to download them using the above command. I don't want to have to parse the output of yum list installed, and I also don't want to use the contents of /var/log/yum.log* as I'll have to account for erased packages and version discrepancies. However /var/log/yum.log* does have the formatting I require... May 25 14:58:15 Installed: groff-1.18.1.1-11.1.x86_64 May 25 14:58:15 Installed: bzip2-1.0.3-4.el5_2.x86_64 Any suggestions?

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• How do I upgrade Windows Server 2008 R2 Standard (OEM Key) to Enterprise (MSDN Key) using DISM?

  - by Tom Crane

  (Originally asked as After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB but now I know what the question really is...) My Dell server came preinstalled with 2008 R2 Standard. I upgraded to Enterprise to take advantage of more than 32GB RAM. This server is purely for dev and testing, so I want to use my MSDN product key for the upgrade. I originally tried to uprade using the MSDN Enterprise key, but it wouldn't have it: dism /online /Set-Edition:ServerEnterprise /ProductKey:[MSDN key] => Error DISM DISM Transmog Provider: PID=5728 Product key is keyed to [], but user requested transmog to [ServerEnterprise] - CTransmogManager::ValidateTransmogrify I tried several things, including changing the current product key to the MSDN one. Eventually I used a KMS generic key which can be found in several technet forum posts. dism /online /Set-Edition:ServerEnterprise /ProductKey:[KMS Generic Key] ... and this appeared to work. I then changed the product key again (using the control panel) to the MSDN key, thinking that was the end of the matter. Only later when tried to start up VMs did I realise I only had 4GB of usable RAM. I didn't make the connection with the licensing changes at this point and went off on a wild goose chase of BIOS settings, memory configurations and the like. Only later when I saw this... http://social.technet.microsoft.com/Forums/en/winserverTS/thread/6debc586-0977-4731-b418-ca1edb34fe8b ...did I make the connection and reapply the KMS Generic key - which gave me all the RAM back. But now I have a system that isn't properly licensed, presumably I won't be able to activate it as it is, so I've got 2 days to enjoy it. With the MSDN key applied, only 4GB RAM is usable. Is there a way round this without a) rebuilding the server from scratch with the MSDN key from the start or b) buying a retail Enterprise license

  Read the article

• Server 2003 and XP Client; Why are HTTP connections being silently dropped.

  - by Asa Yeamans

  On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

  Read the article

• How to is MySQL's "net_buffer_length" config: viewed and reset?

  - by blunders

  Attempt to see the "net_buffer_length" config before resetting it: mysql> show variables like "net_buffer_length"; +-------------------+-------+ | Variable_name | Value | +-------------------+-------+ | net_buffer_length | 16384 | +-------------------+-------+ 1 row in set (0.00 sec) Attempt to reset "net_buffer_length" config: mysql> set global net_buffer_length=1000000; Query OK, 0 rows affected (0.00 sec) Attempt to confirm the "net_buffer_length" config has been reset: mysql> show variables like "net_buffer_length"; +-------------------+-------+ | Variable_name | Value | +-------------------+-------+ | net_buffer_length | 16384 | +-------------------+-------+ 1 row in set (0.00 sec) What's wrong with the commands I'm using that result in the config not updating? MySQL Server Version: 5.1.53-community DATABASE_ENGINE: INNOdb Questions, feedback, requests -- just comment, thanks!

  Read the article

• Windows Server 2008 can't start postgresql-x64-9.0 service: could not create any TCP/IP sockets

  - by Rob

  After rebooting a Windows Server 2008 machine to apply system updates, we recently we began having some issues running PostgreSQL 9.0. When we noticed the problem, we reverted the Windows updates, but the issue persists: From services.msc, attempting to start the postgresql-x64-9.0 service fails. Half-way through starting the progress bar becomes very slow, and eventually responds with error 1053; "the service did not respond in a timely fashion." Interestingly enough, bringing up the task manager shows multiple instances of postgres.exe have been started, and looking at the log file shows: 2011-02-10 14:44:02 ESTLOG: database system is ready to accept connections I then tried killing the processes, and starting via the command-line (as the user postgres), but I receive a different error: C:/Program Files/PostgreSQL/9.0/bin/pg_ctl.exe start -N "postgresql-x64-9.0" -D "F:/SHARE/postgres" -w waiting for server to start............................................................... pg_ctl: could not start server ESTWARNING: could not create listen socket for "192.168.0.101" ESTFATAL: could not create any TCP/IP sockets The log file again indicates that the database is ready to accept connections. Also, using netstat indicates that no other processes are using port 5432; I can't think of any other obvious reason that opening the listen socket might fail. Any help would be greatly appreciated.

  Read the article

• IIS 7.5 fails to open database after computer machine on that database server is working restarts.

  - by Jenea

  Hi. I decided to post this question also here in case the issues we have is related to sql server. There is a problem that bother me for some time. I have an asp.net mvc that uses NHibernate for modeling the database. The infrastructure is the following: Windows 2008 R2 for all virtual machines. IIS 7.5 is working on one virtual machine. Sql Server 2008 is working on another virtual machine. We have couple of databases, two that stores application data and one that registers all unhandled exceptions. Sometimes virtual machine that hosts database server restarts (in the middle of the night, not quite sure about the reason) after that connection to the databases that stores application data is not working and as result there are thousands of unhandled exceptions that get registered in the third database. Important to mention that databases are accessible from Management Studio. The problem is solved by resetting IIS. Connetion are handled via NHibernateUtil class which opens and closes session at each request.

  Read the article

• Cannot deploy reports on localhost/reports

  - by Jackson Sunuwar

  I am using Microsoft SQL Server 2008 R2, Sql Server Reporting Services(SSRS) on an xp virtual machine.. I have created a report and am trying to deploy it... but getting this error... The specified report server URL http://localhost/Reports could not be found. Verify the syntax of the URL and that the report server exists. I went to see my "services".... SQL Server (SQLEXPRESS) is "started", but SQL Server (MSSQLSERVER) is not. When I try to start it, it says windows could not start the sql server on local computer error code 10048 I tried to go in cmd and tried C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe -sMSSQLSERVER I get this, Server Error: 17058, Severity: 16, State: 1. can someone please help me...

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• Good way to store domain CSR and KEY files

  - by Bert Goethals

  For my company I'm starting to manage more and more domains; and with that more and more certificates for those domains. What is a good way to store the basic KEY and CSR files generated? I was considering a git repo on our private code server. This does not seem secure enough though. Would you suggest and other system, or how this can be done securely with a source control system like git? Also: Does it make sense to store the CRT files and CA files in use?

  Read the article

• What can I do to determine the root cause of a Windows server hanging/freezing?

  - by Aaronaught

  We set up a new server here a few weeks ago that I am informally responsible for managing. Almost everything works perfectly except for one thing: Every so often it hangs without warning. To clarify: When I say hangs, I mean completely. None of the services respond and I'm unable to even get onto a local console - the display acts as though there's no VGA signal. One time, the server actually responded to pings, another time I got the "destination host unreachable" response, but most of the time the pings just time out, as one would expect for a hung server. Event logs don't show anything after a reboot. I don't mean that they don't show anything interesting, I mean that they don't show anything at all from before the failure occurs to after the reboot. And there are never any performance problems, strange errors, or other obvious signs of impending doom before it happens. I don't expect any easy answers here. What I'd like to know his I can methodically determine the root cause of this problem, be it a misbehaving service, defective hardware, or something else. Is there any kind of logging I can set up that will help me get to the bottom of this? Any hardware diagnostics or remote monitoring? Anything else I can do to help me discover what's actually happening, or at least be able to eliminate what isn't wrong? Just to reiterate, I really don't want to start speculating about possible causes and take a trial-and-error approach, because it's going to be at least several days at a time before I would have conclusive results. I'm looking for solutions to reliably trace the problem to its source.

  Read the article

• Does exportfs disrupt users already utilizing those filesystems?

  - by CptSupermrkt

  I need to modify a servers /etc/exports file to export to an additional host. After modifying this file, for it to take effect (i.e. for the additional host to have access to the designated filesystem), I believe I have to run "exportfs" on the server exporting the filesystem. Does this disrupt users who are currently using filesystems that are exported from that serving host? I'm hoping to add this new host "silently", without disruption. Any additional advice related to this, common traps, things to be careful of, etc. would be appreciated if you have any. Edit: just in case...uname -a returns 2.6.32-358.18.1.el6.x86_64 #1 SMP Fri Aug 2 17:04:38 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• How to fix this error 'cvs [checkout aborted]: no such tag r20120711' on php eclipse helios?

  - by Manu-dra-kru

  I am using php eclipse helios for debugging php code and using CVS as repositiry. Under CVS repository there are 3 - head branch version and head conatins the repository of server. Under head again I have 3 bms cvsroot news4u To create a new branch I used to click on news4u and select a option 'add to branch list'. But accidently I selected 'Tag as version' with name r20120711 and after that I have created a branch by same name. Now if check out is taken, it gets check out partially and gets failed and if tried to commit the resource, it says, 'no tag is found by that name'. How to fix this.

  Read the article

• Tracking the linux config with git: how?

  - by Pierre

  I'd like to track my linux configurations with git. My idea is to have a branch for each server. /etc is not the only one directory to be tracked (I won't git init in '/etc' ) As far as I could see, it is possible to init a git for a distant directory. I tried this: # mkdir -p /git/.git # cd /git # git --work-tree=/ --git-dir=/git/.git init Initialized empty Git repository in /git/.git/ 1) Creating a new branch before everything is not possible # git branch server1 fatal: Not a valid object name: 'HEAD'. 2) adding a file in master/HEAD is not possible # touch README.md # git add README.md fatal: Unable to create '//.git/index.lock': No such file or directory how should I properly setup git to track my system-config ? Thanks. P.

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• Can SQL Server (2008) transaction logs handle the database being dropped and re-created?

  - by Ben

  We're trying to restore a database (created programatically by running a hand-crafted SQL script we have). Our backup routine is to create a full backup of every database on the SQL Server 2008 instance on a Saturday then automatic transaction logs (I assume these are created automatically anyway - we appear to have lots of log files, possibly one per transaction after the full backup was taken?). On Tuesday this week the database in question was dropped and another one with the exact same name and schema was created. SQL Server has continued to create transaction log files but it hasn't had chance to create a new full backup (that won't happen until next Saturday). Now as it turns out we need to restore the database to how it was on Thursday. This is after the "drop and re-create". My question is, is this possible? If it isn't, what exactly does SQL Server think that it's writing to those transaction logs created since the drop and re-create? (I understood they were kind of files containing a binary delta, which makes me think maybe we can restore from them?) I'm no DBA but then neither is our IT department, so I'm doing the best I can to resolve this. Any advice much appreciated!

  Read the article

• What are secure ways of sharing a server (ssh+LAMP) with friends?

  - by Bran the Blessed

  What is the best way to share a virtual server with friends? More precisely, I have the following assets: A virtual private server (Debian Lenny) with root access for myself, running... SSH apache2 mysql Some unused disk space Some friends in need of hosting The problem I would now like to do the following: Hosting one or several domains per friend My friends should have full access to their domains, including running PHP scripts, for example My friends should not be able to poke around in other directories The security of my server should not be compromised by faulty PHP scripts To clarify: I do trust my friends in the sense that they are not trying to do something evil with their access. I just do not trust the programs they are going to run. So, what are your recommendations for establishing such a scenario? Partial solution I already came up with the following plan: Add chrooted SSH users for my friends Add Apache vhosts per user (point the directories to subdirectories of the homedirectories, i.e. /home/alice/example.com, /home/bob/example.net, etc. But how can I enforce a chroot-like environment for the scripts they are running within these vhosts? Any pointers would be appreciated.

  Read the article

• Nginx config with try_files and rewrite : precedence?

  - by Penegal

  Good morning, everybody. Firstly, this question may have been already asked, but I searched ServerFault during about 15 minutes without finding it, so, if it was already asked, please accept my apologies. I'm trying to rationalize my Nginx server config, but I have a rather dumb question that I couldn't solve, even with extensive Web search, except if I totally f*cked my search. Here is the question : is try_files parsed before or after rewrite ? Asked differently, Do I have to put try_files after all rewrite directives, or is Nginx config parser smart enough to evaluate try_files after all relevant rewrite directives ? The link with the config rationalization is that the answer to this question will change the organisation of the config, ie if config file order of try_files and rewrite changes the config behaviour, it will force me to disperse my includes, some of them containing try_files and other ones containing rewrite, because I also have rewrite directly in nginx.conf. Hoping you can help me, Regards.

  Read the article

• Adding a 2008 server to a 2003 Domain with DNS devolution?

  - by mvdwege

  I'm running into a problem adding a 2008 server to our existing 2003 domain, and as I am not a Windows admin, I'm not getting the problem here. Some reading around on Technet seems to indicate that DNS devolution is the issue. Here's the setup: DNS for the entire company is hosted on a Unix server running Bind, including the service records for the Windows domain. Our toplevel is company.local, and functional domains are in subdomains, such as mgt.company.local (our management servers). Our Windows servers live mostly in office.company.local, but some of them live in .mgt.company.local and .customers.company.local. The 2003 servers all succesfully authenticate against company.local as the Windows domain. Their position in the infrastructure is set by setting the primary DNS suffix under the network settings and the computer name dialog. Trying to do the same with a brand new 2008 install throws an error though: "Changing the Primary Domain DNS name of this computer to office.company.local failed [...] The specified server cannot perform the requested operation" I tried googling, but the closest I came was the Technet article on DNS Devolution, and I can't make heads nor tails on how to apply that to my case. Addendum 2012-10-23: The problem is not joining the domain, that works, the problem is that it joins with the wrong name, as .company.local, instead of .office.company.local. So far everything works, but I'm rather afraid to run production like this, because sooner or later something is going to complain about the AD name not matching DNS.

  Read the article

• sql server 2005 delphi 2010 dbexpress connection

  - by xsintill

  Trying to connect to sql server 2005 with delphi 2010 gives me the following error after configuring the data explorer: 'Borland.data.TDBXError: DBX Error: Driver could not be properly initialized. Client library may be missing, not installed properly, or wrong version' I know there is a work around by installing the sql server 2008 management studio. But this is not a good solution if all pc's need to have this prerequirement. Anybody know a better solution/fix. Delphi 6 does not have this problem.

  Read the article

• SQL Server connection string Asynchronous Processing=true

  - by George2

  Hello everyone, I am using .Net 2.0 + SQL Server 2005 Enterprise + VSTS 2008 + C# + ADO.Net to develop ASP.Net Web application. My question is, if I am using Asynchronous Processing=true with SQL Server authentication mode (not Windows authentication mode, i.e. using sa account and password in connection string in web.config), I am wondering whether Asynchronous Processing=true will impact performance of my web application (or depends on my ADO.Net code implementation pattern/scenario)? And why? thanks in advance, George

  Read the article

< Previous Page | 302 303 304 305 306 307 308 309 310 311 312 313  | Next Page >