Search Results

Search found 24865 results on 995 pages for 'default route'.

Page 307/995 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• Zabbix Log Monitoring - Duplicate alerts

  - by ArunS

  I am configured Zabbix to monitor my Jboss Server logs for Erros and exclude some know errors. This setup is working with one issue. Zabbix will send me alerts when there is a new "ERROR" entry in the log file. But sometimes I get multiple alerts for the same event. For example, I got 5 alerts with the same time stamp "2012-06-25 07:55:56,864 ERROR". The duplicate alerts count is not constant, sometimes I get 2 sometimes 5 or 11. I checked the Monitoring Latest data in the GUI, and found that there is no duplicate entries. I have given my configuration of the log monitoring below. I am using latest version of zabbix server(2.0) Item configuration: Description: Server Error Monitoring. Key: log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip] Type: Zabbix Agent (Active) Type of information: Log Interval :30 Trigger configuration: Description: Found Error in Server Log. Expression: (({SERVER Error Monitoring - PS:log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip].regexp("can not execute")})=0) & (({SERVER Error Monitoring - PS:log["/SERVER/jboss/jboss-5/server/ps/log/server.log","ERROR",UTF-8,200,skip].regexp("Unexpected redirect")})=0) Event generation: Normal + Multiple TRUE events Action configuration: Name: alert mail Event source: Trigger Enable escalations: Uncheck Default subject/message: Default Recovery message: Uncheck Action conditions: Trigger value = PROBLEM Action operations: Send message to User "Admin" Please help me fixing this issue.

  Read the article

• This operation has been canceled due to restrictions in effect on this computer. Please contact your

  - by WebDude

  I am having a highly annoying problem on Windows 7 with Microsoft Outlook 2007. Whenever I click on any hyperlinks I am present with the message This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator and let's not forget the most ear-piecing "DING" to accompany this wonderful informative message. Now I have searched the web high and low for a solution here and most sources suggest the same solution of resetting your IE as your default browser. Tried .. failed A lot of sources suggest this has something to do with installing and uninstalling chrome. I have never installed Chrome but am actually consdering this to see if it by some chance fixes my computer. A lot of sources also point to a microsoft kb article 325478 which is focused around Windows XP and totally unrelated to my problem. I see there are some other queries on SuperUser with no resolution. Please can someone help solve this highly annoying issue. I am running Window 7 professional x64 Microsoft Office 2007 Microsoft Security Essentials Running in a windows work group with default policy settings HELP!

  Read the article

• Windows 2008, IIS7 and virtual directories

  - by Thomas

  I created a virtual directory called test (C:\test) under the Default Web Site and added two simple test files (one html and one aspx). I thought I had to add the IUSR and NetworkService (for application pools) to C:\test and grant the users appropriate rights in order for IIS7 to serve the content. It appears that is not the case at all as I can view any files in the virtual directory (even if I convert it to an application) without changing or adding any security settings on the C:\test folder. I just installed IIS7 with ASP.NET on Windows 2008 without changing any settings besides adding the virtual directory. Am I missing something? Even my book on IIS7 states that the user accounts should be added an appropriate rights should be added. I added the following to answer the comments: I am referencing the file using a public IP http://xxx.xxx.xxx.xxx/test/one.html and the IP nor localhost is in my trusted sites. I am not signed in on the server at all as I am accessing the content from my home machine and the content is on my production server. The following users/groups have access to c:\test on the server (Creator Owner, System, Administrators, Users) and the app pool is running under the default NetworkService account. I basically installed win2008, added the IIS role with asp.net. I then opened IIS7, added a virtual directory and copied two files to the directory to test. It works which is great but I want to understand why it works. How is it that IIS7 can access files in the C:\test folder without any permissions set.

  Read the article

• GRE keepalive with Linux and RouterOS

  - by eri

  I have a Linux host and couple of routerboadrs. I created a GRE tunnel, but Linux does not answer keepalive packages. Then router mark gre connection as unreachable, so I cant send to Linux host from router subnet. If linux sends something into tunnel (ping, etc.) - RouterOS mark connection as reacheble. Second and next packages routed nicely until one minute idle (no traffic). Tunnel in linux a make in this way: remote=x.x.x.x dev=gre21 network=10.21.0.0/16 ip tunnel add ${dev} mode gre remote ${remote} ttl 255 ip addr add 172.16.1.1/24 peer 172.16.1.21 dev ${dev} ip link set ${dev} up ip route add ${network} dev ${dev} And ip l: 14: gre21: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1476 qdisc noqueue state UNKNOWN link/gre 0.0.0.0 peer 109.60.170.15 How to set state "running"? How to keep alive tunnel? Ping in cron?

  Read the article

• WMI permissions: Select CommandLine, ProcessId FROM Win32_Process returns no data for CommandLine

  - by user57935

  Hi all, I am gathering performance data via WMI and would like to avoid having to use an account in the Administrators group for this purpose. The target machine is running Windows Server 2003 with the latest SP/updates. I've done what I believe to be the appropriate configuration to allow our user access to WMI (similar to what is described here: http://msdn.microsoft.com/en-us/library/aa393266.aspx). Here are the specific steps that were followed: Open Administrative Tools - Computer Management: Under Computer Management (Local) Expand Services and Applications, right click WMI Control and select properties. In the Security tab, expand Root, highlight CIMV2, click Security (near bottom of window); add Performance Monitor Users and enable the options : Enable Account and Remote Enable. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - Right click My Computer and select properties, select the COM security tab, in “Access Permissions” click "Edit Default" select(or add then select) “Performance Monitor Users” group and allow local access and remote access and click ok. In “Launch and Activation Permissions” click “Edit Default” select(or add then select) “Performance Monitor Users” group and allow Local and Remote Launch and Activation Permissions. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - My Computer - DCOM Config - highlight “Windows Management and Instrumentation” right click and select properties, Select the Security tab, Under “Launch and Activation Permissions” select Customize, then click edit, add the “Performance Users Group” and allow local and remote Remote Launch and Remote Activation privileges. I am able to connect remotely via WMI Explorer but when I perform this query: Select CommandLine, ProcessId FROM Win32_Process I get a valid result but every row has an empty CommandLine. If I add the user to the Administrators group and re-run the query, the CommandLine column contains the expected data. It seems there is a permission I am missing somewhere but I am not having much luck tracking it down. Many thanks in advance.

  Read the article

• OpenVPN Problems, connecting with Windows OpenVPC client to Linux OpenVPN

  - by Filip Ekberg

  After following this guide and connecting to the VPN Server, I get the following error: Sat Mar 06 19:43:08 2010 us=127000 NOTE: failed to obtain options consistency info from peer -- this could occur if the remote peer is running a version of OpenVPN before 1.5-beta8 or if there is a network connectivity problem, and will not necessarily prevent OpenVPN from running (0 bytes received from peer, 0 bytes authenticated data channel traffic) -- you can disable the options consistency check with --disable-occ. I am using Archlinux and installed openvpn with Pacman. I want to acheive the following: Connect to the VPN Server, being able to route certain made up hosts through it. Is this possible? openvpn --version gives me the following openvpn --version OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] built on Jan 31 2010 Originally developed by James Yonan Copyright (C) 2002-2009 OpenVPN Technologies, Inc. <[email protected]> Suggestions?

  Read the article

• OpenVPN Problems, connecting with Windows OpenVPC client to Linux OpenVPN

  - by Filip Ekberg

  After following this guide and connecting to the VPN Server, I get the following error: Sat Mar 06 19:43:08 2010 us=127000 NOTE: failed to obtain options consistency info from peer -- this could occur if the remote peer is running a version of OpenVPN before 1.5-beta8 or if there is a network connectivity problem, and will not necessarily prevent OpenVPN from running (0 bytes received from peer, 0 bytes authenticated data channel traffic) -- you can disable the options consistency check with --disable-occ. I am using Archlinux and installed openvpn with Pacman. I want to acheive the following: Connect to the VPN Server, being able to route certain made up hosts through it. Is this possible? openvpn --version gives me the following openvpn --version OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [LZO2] [EPOLL] built on Jan 31 2010 Originally developed by James Yonan Copyright (C) 2002-2009 OpenVPN Technologies, Inc. <[email protected]> Suggestions?

  Read the article

• WMI permissions: Select CommandLine, ProcessId FROM Win32_Process returns no data for CommandLine

  - by user57935

  I am gathering performance data via WMI and would like to avoid having to use an account in the Administrators group for this purpose. The target machine is running Windows Server 2003 with the latest SP/updates. I've done what I believe to be the appropriate configuration to allow our user access to WMI (similar to what is described here: http://msdn.microsoft.com/en-us/library/aa393266.aspx). Here are the specific steps that were followed: Open Administrative Tools - Computer Management: Under Computer Management (Local) Expand Services and Applications, right click WMI Control and select properties. In the Security tab, expand Root, highlight CIMV2, click Security (near bottom of window); add Performance Monitor Users and enable the options : Enable Account and Remote Enable. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - Right click My Computer and select properties, select the COM security tab, in “Access Permissions” click "Edit Default" select(or add then select) “Performance Monitor Users” group and allow local access and remote access and click ok. In “Launch and Activation Permissions” click “Edit Default” select(or add then select) “Performance Monitor Users” group and allow Local and Remote Launch and Activation Permissions. ­Open Administrative Tools - Component Services: Under Console Root go to Component Services- Computers - My Computer - DCOM Config - highlight “Windows Management and Instrumentation” right click and select properties, Select the Security tab, Under “Launch and Activation Permissions” select Customize, then click edit, add the “Performance Users Group” and allow local and remote Remote Launch and Remote Activation privileges. I am able to connect remotely via WMI Explorer but when I perform this query: Select CommandLine, ProcessId FROM Win32_Process I get a valid result but every row has an empty CommandLine. If I add the user to the Administrators group and re-run the query, the CommandLine column contains the expected data. It seems there is a permission I am missing somewhere but I am not having much luck tracking it down. Many thanks in advance.

  Read the article

• Setting up Tomcat6 properly in Ubuntu 10.04

  - by aasukisuki

  We have a Tomcat6 instance running on Ubuntu 10.04LTS. Our test box was just a Windows machine running Tomcat6. Both machines (Linux and Windows) have 1GB of ram. Via the Tomcat configuration tool in windows, I was able to set the min/max/permgen sizes of the JVM. Those were set to 256/512/128 respectively. Now on the Ubuntu box, I've tried setting the JVM options in several different places including: Adding JAVA_OPTS & CATALINA_OPTS in /etc/environment Adding JAVA_OPTS in $CATALINA_HOME/bin/catalina.sh Creating setenv.sh and adding JAVA_OPTS in $CATALINA_HOME/bin Adding JAVA_OPTS directly to /etc/init.d/tomcat6 Un-commenting the JAVA_OPTS and modifying it in /etc/default/tomcat6 Nearly all of those methods did not work, except for modifying /etc/init.d/tomcat6 directly (and possibly the /etc/default/tomcat6 change, but I just did that). However, my understanding is that when you change these settings, only one JVM should be used for the entire tomcat6 instance, and that memory is shared among the applications. On our windows box, tomcat6 is run as a service, and appears to behave this way. However, when I look at htop on the linux box, there are 20+ tomcat6 instances (I have an app that triggers internal jobs every X seconds using chron, so maybe these are threads? Or are they actual instances) all with those memory settings. The app runs fine for a bit, but eventually ends up locking up. I'm guessing each of these apps thinks it has 512m to work with and never GC's and then locks tomcat up completely. What is the proper way to set all of this up?

  Read the article

• Windows Server 2003 R2 Terminal Server : Internet Explorer Enhanced Security won't disable for Users

  - by Tubs

  The Internet Explorer Enhanced Security (IEES) won't disable using the normal method of disabling it from the Add/Remove Programs/Windows components. This came to light immediately after testing. IEES was disabled after Terminal Services were installed for admin and users, and after IE8 was installed. My initial thoughts were that there was some clash between IE8 and IE6 (which is the default on 2003 R2), so I uninstalled IE8 and reverted back to IE6. The same symptoms were displayed, when a normal user logged on Internet Explorer Enhnaced Security was enforced. I then thought it could be a problem that Terminal Server wasn't recognising the removal as IEES was on when initially installed. I uninistalled the Terminal Server Componants using the server roles, and then reactivated and deavtived IEES. Windows Server 2003 R2 allows a limited number of users to connect to RDP by default, so I logged on as a normal user, and IEES was disabled. I then reinstalled Terminal Server, and logged on as a normal user. IEES was back enabled. Why is this?

  Read the article

• Sending microphone input over Remote Desktop 7.0

  - by Taylor Price

  I am using Remote Desktop 7 (the new version that came out with Windows 7) to control a Windows XP Pro machine. I have selected "Record from this computer" in the Remote Audio settings. When I connect to the machine, go to the control panel, open the sound panel, and go to the audio tab, I find that the default sound playback device is "Microsoft RDP Audio Driver". However, there is no default sound recording device. As expected, my IP phone thinks there is no recording device. If I am sitting in front of the computer with a mic plugged in, it works just fine. Has anybody else been able to get this work appropriately? Is there anything that I have to setup on the XP machine to get this working? Thanks in advance. Edit: As John T pointed out below, you have to be connecting to a Windows 7 Enterprise or Ultimate machine for this to work. I've also found out that Multi-monitor support has the same requirement.

  Read the article

• Move exchange mailboxes cross forest

  - by Aceth

  Having a hard time migrating user mailboxes across 2 forests. I've set up ADMT 3.2, No dns issues and fully route-able between the domains etc. Have come to migrate user mailboxes and the exchange shell just comes back with ... [PS] C:New-MoveRequest -Identity "username" -TargetDatabase "maildb" -RemoteGlobalCatalog 'gdc.doman.local' -RemoteCredential (get-credential) -TargetDeliveryDomain 'sourcedomain.local' Parameter set cannot be resolved using the specified named parameters. + CategoryInfo : InvalidArgument: (:) [New-MoveRequest], ParameterBindingException + FullyQualifiedErrorId : AmbiguousParameterSet,New-MoveRequest We are running a mixed environment (windows server 2003 and up with exchange 2003 and exchange 2010 (different servers obviously)) as a source domain and full Server 2008 R2 servers in the target domain with only 1 exchange 2010 server. We have ran this command on the Exchange 2010 server on the target domain and when asked giving the credentials of an admin in source domain in the format : sourcedomain\source_administrator Any help would be greatly appreciated Thanks Rhys

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• Over 200 active requests like "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)"

  - by Stefan Lasiewski

  Some details: Webserver: Apache/2.2.13 (FreeBSD) mod_ssl/2.2.13 OpenSSL/0.9.8e OS: FreeBSD 7.2-RELEASE This is a FreeBSD Jail. I believe I use the Apache 'prefork' MPM (I run the default for FreeBSD). I use the default values for MaxClients (256) I have enabled mod_status, with "ExtendedStatus On". When I view /server-status , I see a handful of regular requests. I also see over 230 requests from the 'localhost', like these: 37-0 - 0/0/1 . 0.00 1510 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 38-0 - 0/0/1 . 0.00 1509 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 39-0 - 0/0/3 . 0.00 1482 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 40-0 - 0/0/6 . 0.00 1445 0 0.0 0.00 0.00 127.0.0.2 www.example.gov OPTIONS * HTTP/1.0 I also see about 2417 requests yesterday from the localhost, like these: Apr 14 11:16:40 192.168.16.127 httpd[431]: www.example.gov 127.0.0.2 - - [15/Apr/2010:11:16:40 -0700] "OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)" The page at http://wiki.apache.org/httpd/InternalDummyConnection says "These requests are perfectly normal and you do not, in general, need to worry about them", but I'm not so sure. Why are there over 230 of these? Are these active connections? If I have "MaxClients 256", and over 230 of these connections, it seems that my webserver is dangerously close to running out of available connections. It also seems like Apache should only need a handful of these "internal dummy connections" We actually had two unexplained outages last night, and I am wondering if these "internal dummy connection" caused us to run out of available connections.

  Read the article

• Hosting 2 Sites Under 1 DiscountASP.Net Hosting Account

  - by Gav

  I've currently got an ASP.Net site hosted with DiscountASP.Net what I would like to do now is put a second site in a subdirectory of this original site and register a new domain to point at the subfolder, so to the end user its 2 completely seperate sites. I've asked DiscountASP support if they could do this and they just say they dont support it and wont help. If I registered the second domain with someone like 123-reg is it possible to make that domain point to a subdirectory in my main site? If not I may have to put some sort of redirect on my route index page that sends you to the right page based on the URL you requested but I would really rather not have to go there. I don't want to buy an additional account as the second site is just a bit of a side project that may well go no where.

  Read the article

• postfix + opendkim not signing correctly. how to debug this?

  - by Dean Hiller

  EDIT: I did get a little further but all posts on my search say permissions are wrong or regenerate key but I fixed that to be 644 as well as owned by DKIM AND I keep regenerating the key but it is not helping. My latest error now is this Apr 21 21:19:12 Sniffy opendkim[8729]: BB5BF3AA66: dkim_eom(): resource unavailable: d2i_PrivateKey_bio() failed Apr 21 21:19:12 Sniffy postfix/cleanup[8627]: BB5BF3AA66: milter-reject: END-OF-MESSAGE from localhost[127.0.0.1]: 4.7.0 resource unavailable; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<abcs.com> I am looking for a way to simply debug this(don't necessarily need the answer but a way to get logs from opendkim would be good). If I stop opendkim, I see postfix log connection refused which is good. but when I send mail with opendkim started, I see no logs whatsoever. I even add the "LogWhy Yes" line to my opendkim.conf file as well and still see no logs there. Since I see opendkim running under user opendkim, I changed the owner of /etc/opendkim/* and /etc/opendkim and /etc/opendkim.conf all to opendkim user. I am running on ubuntu. My opendkim.conf file is # Log to syslog Syslog yes # Required to use local socket with MTAs that access the socket as a non- # privileged user (e.g. Postfix) UMask 002 # Sign for example.com with key in /etc/mail/dkim.key using # selector '2007' (e.g. 2007._domainkey.example.com) #Domain example.com Domain sniffyapp.com #KeyFile /etc/mail/dkim.key KeyFile /etc/opendkim/keys/sniffyapp.com/default.private #Selector 2007 Selector default # Commonly-used options; the commented-out versions show the defaults. #Canonicalization simple Mode sv #SubDomains no #ADSPDiscard no Socket inet:8891:localhost ExternalIgnoreList refile:/etc/opendkim/TrustedHosts InternalHosts refile:/etc/opendkim/TrustedHosts LogWhy Yes I of course have these lines added to main.cf in postgres smtpd_milters = inet:127.0.0.1:8891 non_smtpd_milters = $smtpd_milters milter_default_action = accept

  Read the article

• Why isn't ICMP routing with iptables nat routing

  - by Scott Forsyth - MVP

  I'm using iptables on Ubuntu server to route a public IP to a private IP. I want to nat all traffic, including 80, 443 and ICMP. However, it appears that ICMP isn't routing. I have a steady ping going to the public IP and it never stops, even with NAT pointing to a bogus IP. Here are the rules that I'm using: iptables -t nat -I PREROUTING -d 206.72.119.76 -j DNAT --to-destination 10.240.5.5 iptables -t nat -I POSTROUTING -s 10.240.5.5 -j SNAT --to-source 206.72.119.76 I tried with rules for ICMP specifically, but no such luck: iptables -t nat -I PREROUTING -d 206.72.119.76 - icmp --icmp-type echo-request -j DNAT --to-destination 10.240.5.5 Any ideas?

  Read the article

• Pros and cons IPV6 vs stretched vlans

  - by Jim B

  I'm having a hard time finding information about whether implementing ipv6 or using a stretched vlan is a better option for geographically dispersed sites is better. Does anyone know: Problems with stretched vlans (mac address broadcasting etc) costs for devices to solve those problems pros for using IPv6 instead EDIT. What I am looking for is pros and cons against implementing the equipment required to implement stretched IPv4 vlans vs simply using IPv6 to solve the same problems. Eg admins stretch vlans instead of route because protocol X can't be routed, but IPv6 can encapsulate protocol X so there is no need to worry about that problem.

  Read the article

• Amazon Ec2: Problem In Setting up FTP Server

  - by Muntasir

  after setting up My vsFtp Server ON Ec2 i am facing problem , my client is Filezilla and i am getting this error Response: 230 Login successful. Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 500 OOPS: invalid pasv_address Command: PORT 10,130,8,44,240,50 Response: 500 OOPS: priv_sock_get_cmd Error: Failed to retrieve directory listing Error: Connection closed by server this is the current setting in my vsftpd.conf #nopriv_user=ftpsecure #async_abor_enable=YES # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list GNU nano 2.0.6 File: /etc/vsftpd/vsftpd.conf # #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES pasv_enable=YES pasv_min_port=2345 pasv_max_port=2355 listen_port=1024 pasv_address=ec2-xxxxxxx.compute-1.amazonaws.com pasv_promiscuous=YES Note: i have already open those port in security group i mean listen port, min max if someone shows me how to fix this i will be very greatful thanks

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• How can I get HTTPD to serve the html/php files and not list/index them when they are in folder for virtual host. Using Centos 6.0

  - by LaserBeak

  My virtual hosts are configured as below, initally I could not even get to the /public_html/ directory when typing example.com and apache would just serve me up the default welcome page, I would also get the error: Directory index forbidden by Options directive: /var/www/html/example.com/public_html/ in the log . After editing the welcome.conf page (- Index) so it does not show again when I now type example.com the/public_html/ contents (Index.php) are indexed in the browser. Where as I want it to actually execute and diplay the index.php page. vhost.conf , located in etc/httpd/vhost.d/ NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName localhost ServerAlias localhost.example.com DocumentRoot /var/www/html/example.com/public_html/ ErrorLog /var/www/html/example.com/logs/error.log CustomLog /var/www/html/example.com/logs/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName example.org ServerAlias www.example.org DocumentRoot /var/www/html/example.org/public_html/ ErrorLog /var/www/html/example.org/logs/error.log CustomLog /var/www/html/example.org/logs/access.log combined </VirtualHost> httpd.conf, settings on default, added onto end: Include /etc/httpd/vhosts.d/*.conf Root directories: DocumentRoot "/var/www/html"

  Read the article

• Fedora to Fedora remote desktop does not work (connection closed error, even after setting everything up)

  - by jonderry

  I'm trying to use remote desktop on my laptop (running Fedora) to my desktop (also running Fedora) on the same local network. I configured Remote Desktop on my desktop via System - Preferences - Remote Desktop, verified that the port is open by nmap, and attempted to connect from my laptop via vinagre (also tried appending :5900 for the port, and using the ip address). In all cases, the connection fails with a popup that says "Connection closed\n Connection to host was closed." EDIT: I am able to use vinagre from the desktop to remote desktop into itself, just not from one machine to the other. I tried vncviewer and a similar problem occurs (unable connect to socket: No route to host (113))

  Read the article

• Emails forwarded via postfix get flagged as spam and forged in Gmail

  - by Kendall Hopkins

  I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >