Search Results

Search found 21589 results on 864 pages for 'primary key'.

Page 307/864 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

  • Recover harddrive data

    - by gameshints
    I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

    Read the article

  • Which network management system (NMS) to choose?

    - by QrystaL
    I need to integrate NMS in large enterprise system for data collection purposes. Primary requirements: collection by SNMP great scalability (up to 1,000 devices with 1,000 interfaces each) failover data storage in Oracle DBMS integration API (configuration, data access) Any ideas would be appreciated...

    Read the article

  • Windows 7 Administrator HomeUsers Account

    - by Charles Carrington
    I'm trying to login to my Windows 7 PC from another PC so that I can transfer files to the Windows 7 PC. I've just installed Visual Studio 2008 on my new PC, and I wan't to transfer all of my work from my old machine to my new one. When I first set up a user on the Windows 7 PC after a reformat, the account created had a Group field that read "HomeUsers; Administrators" when viewing it from the User Accounts screen. You get to this screen by typing "netplwiz" in the search field of the Start Menu. I changed the Group of this account to Administrators before I realized that it was assigned to two Groups -- "HomeUsers; Administrators" as I mentioned above. I was trying to make sure that it was an Administrator account so I didn't have to type in a password everytime I wanted to install software. I can use this computer normally without being asked for an administrator password all the time when I want to install new software, but I can't log in to this PC from another PC because I don't have an account that has a Group of "HomeUsers". I should have left the account alone; everything would've been fine. But there doesn't seem to be a way to assign it to two groups after the initial assignment that take place automatically when you are setting up your computer for the first time. If you assign "HomeUsers" to the account, the Group field on the User Accounts screen will just read "HomeUsers". If you assign "Administrators" to the account, the Group field on the User Accounts screen will just read "Administrators". There's no way to make it read "HomeUsers; Administrators" again. If you don't have at least one account that is a "HomeUsers" account, you cannot log in to the PC from another PC on the network. If you don't have an account that is an "Administrators" account, you cannot install software on your machine without being asked for an Administrator password all the time, which is very annoying. I want an account on my Windows 7 PC that I can use to install software without being asked for a password AND that I can log into from another PC on the network to transfer files. If I could make the Group field read "HomeUsers; Administrators" of my primary account on the Windows 7 PC when I go to the User Accounts screen by typing "netplwiz" in the search field of the Start Menu, my primary account would do what I want it to do. Does anybody know how to make an account in Windows 7 a "HomeUsers" account AND an "Administrators" account? As I said before, Windows 7 does this for you automatically when you first set up your computer. But if you change it inadvertently, there is no way to change it back. At least I don't know how to do it. If anybody has any ideas on how to fix this, I would greatly appreciate it. Thanks, Charles Carrington

    Read the article

  • How to set my Bamboo Fun to work only on ONE of my dual screens?

    - by Przemyslaw Piekarski
    I need dual screen for my web developer job but when I do illustrations I prefer to work on a single screen to avoid the stretching of the workspace which affects tablet's precision. Is there a way to make my tablet work only on my primary screen and, at the same time, use mouse for both screens? I've looked into my tablet's preferences and haven't found it. I use Windows XP, Bamboo Fun A5, ATI Radeon X 1050. Thanks in advance.

    Read the article

  • Two Different nVidia Cards, One as Graphics, One as Physics - Possible?

    - by Jasarien
    Hey guys, Soon I will have a brand new Geforce GTX 285 to replace my current 8800GT. Will it be possible to move my 8800GT to another PCIX slot, put the GTX 285 into the primary slot and use the nVidia software to make the 8800GT do physics? I have enough PCIX slots on my motherboard (4). The GTX 285 will take up 2, so the 8800GT should fit in the 3rd. If anyone knows if this is possible, I would be grateful to be educated!

    Read the article

  • Windows 2003 :: Performance Monitoring :: Simple/Stupid Tutorial

    - by BSI Support
    I have a half dozen front-end servers all running IIS 6.0-based/hosted applications. (primary .NET 2.0 web apps.) Basically, I'd like to take some basic performance data from each one, through such into a spreadsheet, and compare. CPU load, RAM load, whatever... If anyone can point out a very simple/stupid "here's how you do that" type of tutorial, that would be wonderful.

    Read the article

  • Fastest Mac OS X RSS reader

    - by Mr. Man
    I am currently using NetNewsWire as my primary RSS reader on my Mac and was wondering if there was anything faster in terms of feed reload speed. Currently it is pretty slow reloading my 54 RSS feeds that I keep tabs on. There are some features I would like it to have. Google Reader Sync (MUST have feature) Starring/Saving of articles for later reading Thanks in advance!

    Read the article

  • After adding a SSD to my MacBook, the HD never spins down.

    - by Chris Woods
    I added a SSD to my MacBook Pro 17 as the primary drive attached to the SATA controller. I moved the HD to the optical bay using the OptiBay from MCE Technologies which I use for my home directory. The problem I have encountered is the HD seems to never stop spinning. I have modified the sleep settings, hoping one of the various options would solve my problem without success. Any suggestions for me?

    Read the article

  • Sent items folder in a shared mailbox - Outlook 2003/2007

    - by Talking Shoes
    I have permission to attached a mailbox to my profile. This is a mailbox I share and manage with other people. When we send from this address, we would like to have the message show up in this mailbox's sent items folder. The current behavior is that the message goes to our primary account's sent items. I'm using Outlook 2007 but others are using Outlook 2003. This is in an Exchange 2007 environment.

    Read the article

  • CNAME to another domain fails on some office networks, why?

    - by crashalpha
    Our domain "aspenfasteners.com" is hosted by Volusion. We have CNAME records "find" and "search" which point to site indexing accounts on www.picosearch.com. These addresses fail on SOME private office networks which have their own DNS. We suspect the problem comes from Volusion's own name servers, n2.volusion.com and n3.volusion.com. Volusion support on problems this technical is non-existant. We have tried an NSLOOKUP on find.aspenfasteners.com with level 2 debugging info, and we got the results below. Is it possible that the local DNS is recursing to Volusion's name servers, and that while Volusion DOES return the canonical name, they do NOT resolve the address? Can anybody with expertise in this sort of stuff PLEASE look at the NSLOOKUP below and tell me if we are right, because Volusion is giving me absolutely NO support on this topic. I need proof of where the problem lies. Thanks VERY much! Carlo find.aspenfasteners.com Server: mtl-srm-dbsv-01.fastenerwholesale.com Address: 192.168.0.44 SendRequest(), len 61 HEADER: opcode = QUERY, id = 8, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN ------------ Got answer (138 bytes): HEADER: opcode = QUERY, id = 8, rcode = NXDOMAIN header flags: response, auth. answer, want recursion, recursion avail. questions = 1, answers = 0, authority records = 1, additional = 0 QUESTIONS: find.aspenfasteners.com.fastenerwholesale.com, type = A, class = IN AUTHORITY RECORDS: -> fastenerwholesale.com type = SOA, class = IN, dlen = 46 ttl = 3600 (1 hour) primary name server = mtl-srm-dbsv-01.fastenerwholesale.com responsible mail addr = admin.fastenerwholesale.com serial = 10219 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ------------ SendRequest(), len 41 HEADER: opcode = QUERY, id = 9, rcode = NOERROR header flags: query, want recursion questions = 1, answers = 0, authority records = 0, additional = 0 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ------------ Got answer (141 bytes): HEADER: opcode = QUERY, id = 9, rcode = NXDOMAIN header flags: response, auth. answer questions = 1, answers = 1, authority records = 1, additional = 1 QUESTIONS: find.aspenfasteners.com, type = A, class = IN ANSWERS: -> find.aspenfasteners.com type = CNAME, class = IN, dlen = 17 canonical name = www.picosearch.com ttl = 3600 (1 hour) AUTHORITY RECORDS: -> com type = SOA, class = IN, dlen = 43 ttl = 900 (15 mins) primary name server = ns3.volusion.com responsible mail addr = admin.volusion.com serial = 1 refresh = 900 (15 mins) retry = 600 (10 mins) expire = 86400 (1 day) default TTL = 3600 (1 hour) ADDITIONAL RECORDS: -> ns3.volusion.com type = A, class = IN, dlen = 4 internet address = 65.61.137.154 ttl = 900 (15 mins) * mtl-srm-dbsv-01.fastenerwholesale.com can't find find.aspenfasteners.com: Non-existent domain

    Read the article

  • Two wireless NICs on a MacBook - can I bind all VPN traffic to one, and everything else to another?

    - by Ben Aston
    I frequently connect to my workplace over a VPN. I would like to continue watching videos from, say YouTube, whilst I work on the VPN, without degrading the available VPN bandwidth (say for an RDP session). Can I configure a second NIC to deal with only the VPN traffic, with everything else going over the primary? Specs as requested: Macbook Pro, OSX Snow Leopard, using the built in OSX VPN connectivity, the in-built airport card and a USB external wifi adapter.

    Read the article

  • MegaCli newly created disk doesn't appear under /dev/sdX

    - by Henry-Nicolas Tourneur
    After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

    Read the article

  • Using AutoHotKey to change audio output source?

    - by Scott
    I have two primary audio outputs on my machine: The speakers and a USB headset. Currently, in Windows 7 Professional x64, I type "sound" in the Start search menu to open up this dialog: I only care about the top two options for the purposes of this question. I would like to know if there's a way in AutoHotKey to switch from "Speakers (4- Sennheiser USB Headset)" to "Speakers (VIA High Definition Audio)" so I can avoid having to open this dialog every time I wish to switch. Thanks!

    Read the article

  • Alternate way to create a clone of a UNIX System

    - by Spirit
    THE STORY: (If you don't like to read much, down below is the question :) ) Where I work we have two HP RP2470 servers same hardware same number of hard drives same everything :). One of them is a production server and runs HP-UX 11.00. The poor ba***rd hasn't been turned off for years and now I have to make a clone of it on the other server - just in case, for redundancy. The problem is simple (or not simple) as I have to make the the other server exactly the same. However the old version of OS (UX 11.00 is a history now) and the old software running on it, have made my task almost impossible. On the production server there is also a cloning/recover utility Ignite-UX. I tried many times to create a recovery tape with it. Then when I load the tape on the backup server, it succeeds with the loading of the tape (no errors no warnings) but on the next restart it fails to load the OS :S and drops into HP`s ISL prompt. --- THE QUESTION: Is there an alternate way to create a clone of the Unix System? The environment is: 1. 2x HP RP2470 Servers (non-Intel), same hardware, same number od HDDs (two each of them) same everything. 2. OS running: HP-UX 11.00 The production server has to be cloned without downtime - sadly :( as I hope that they will reconsider on this one For example (like on Windows platforms), if you try to copy an entire HDD with Windows inside on another HDD, and then put that HDD on another PC it will still work, as long as the hardware is the same. Can I do something like that with a Unix system? Can I somehow COPY the contents of the entire HDD, put those on another HDD, and then just load the HDD into the other server? (If you haven't read the story the servers are exactly the same) Will it work? Can it be done with ordinary commands like cp or dump or something like that? Does any one have a similar experience? --- UPDATE: 26.01.2012 NOTE: The update is related to "The Story". If you haven't read that part then you can skip this update. This is just a short update on the recover logs from the Ignite Tape.. someone with more exp. might notice something.. ... --- READING CONTENTS OF THE IGNITE TAPE --- --- OUTPUT OMITED --- ... ... x ./configure3, 413696 bytes, 808 tape blocks x ./monitor_bpr, 20480 bytes, 40 tape blocks * Download_mini-system: Complete * Loading_software: Begin * Installing boot area on disk. * Enabling swap areas. * Backing up LVM configuration for "vg00". * Processing the archive source (Recovery Archive). * Wed Jan 25 15:27:32 EST 2012: Starting archive load of the source (Recovery Archive). * Positioning the tape (/dev/rmt/0mn). * Archive extraction from tape is beginning. Please wait. * Wed Jan 25 15:39:52 EST 2012: Completed archive load of the source (Recovery Archive). * Executing user specified script: "/opt/ignite/data/scripts/os_arch_post_l". * Running in recovery mode (os_arch_post_l). * Running the ioinit command ("/sbin/ioinit -c") * Creating device files via the insf command. insf: Installing special files for sdisk instance 0 address 0/0/1/1.15.0 insf: Installing special files for sdisk instance 1 address 0/0/2/0.1.0 insf: Installing special files for sdisk instance 2 address 0/0/2/1.15.0 insf: Installing special files for stape instance 0 address 0/0/1/0.3.0 insf: Installing special files for btlan instance 0 address 0/0/0/0 insf: Installing special files for btlan instance 1 address 0/2/0/0 insf: Installing special files for pseudo driver dlpi insf: Installing special files for pseudo driver kepd insf: Installing special files for pseudo driver framebuf insf: Installing special files for pseudo driver sad * Running "/opt/upgrade/bin/tlinstall -v" and correcting transition link permissions. * Constructing the bootconf file. * Setting primary boot path to "0/0/1/1.15.0". * Executing: "/var/adm/sw/products/PHSS_20146/pfiles/iux_postload". * Executing: "/var/adm/sw/products/PHSS_25982/pfiles/iux_postload". NOTE: tlinstall is searching filesystem - please be patient NOTE: Successfully completed * Loading_software: Complete * Build_Kernel: Begin NOTE: Since the /stand/vmunix kernel is already in place, the kernel will not be re-built. Note that no mod_kernel directives will be processed. * Build_Kernel: Complete * Boot_From_Client_Disk: Begin * Rebooting machine as expected. NOTE: Rebooting system. sync'ing disks (0 buffers to flush): 0 buffers not flushed 0 buffers still dirty Closing open logical volumes... Done Console reset done. Boot device reset done. ********** VIRTUAL FRONT PANEL ********** System Boot detected ***************************************** LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF OFF ON ON LED State: Running non-OS code. (i.e. Boot or Diagnostics) ... ... ... --- SERVER IS PERFORMING POST SEQUENCE HERE --- --- OUTPUT OMITED --- ... ... ... ***************************************** ************ EARLY BOOT VFP ************* End of early boot detected ***************************************** Firmware Version 43.50 Duplex Console IO Dependent Code (IODC) revision 1 ------------------------------------------------------------------------------ (c) Copyright 1995-2002, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size Number State Inst Data --------- -------- --------------------- ----------------- ------------ 0 650 MHz Active Functional 750 KB 1.5 MB 1 650 MHz Idle Functional 750 KB 1.5 MB Central Bus Speed (in MHz) : 120 Available Memory : 2097152 KB Good Memory Required : 16140 KB Primary boot path: 0/0/1/1.15 Alternate boot path: 0/0/2/1.15 Console path: 0/0/4/1.643 Keyboard path: 0/0/4/0.0 Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 1 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux ISL>

    Read the article

  • How to create dynamic volume in stripe configuration, aligned to 1024?

    - by GregC
    I am trying to create a software stripe setup with two physical disks (underneath they are 128K stripe, RAID5 for each). I've read that one can use diskpart, but I am unable to come up with a command that works. This is on Server 2k3 SP2. I was trying create volume stripe disk=2,3 align=1024 Diskpart errors out: The arguments you specified for this command are not valid. P.S. Tried successfully with a basic disk and a primary partition. Please reply, -Greg

    Read the article

  • How to sync bookmarks across Google Chrome and Mozilla Firefox bookmarks?

    - by ViliusK
    How to sync bookmarks across Google Chrome and Mozilla Firefox bookmarks? As I, currently, understand, Google Chrome puts bookmarks seperatly from Google Bookmarks, which is accessible in Firefox by using Google Toolbar for Firefox. Right? So how should I synchronize my browsers? I use Google Chrome as my primary browser and it works good and bookmarks are synchronized across number of computers I'm using. Thanks, viliusk

    Read the article

  • Move Ubuntu to another drive

    - by Ben Dilts
    I have a laptop with an 80GB SSD and 500GB HDD. I currently have Windows installed on the SSD, and a 400GB data partition for Windows on the HDD. I set aside 100GB on the HDD to try out Ubuntu, and I'd like to make it my primary OS and switch it over to the (much) faster SSD. How could I go about getting my Ubuntu setup moved over to the SSD? I have a 120GB USB hard drive I can use if necessary for getting through it.

    Read the article

  • Replace DNS on Openvpn client without redirect-gateway

    - by Gabor Vincze
    I am trying to push DNS to the client with OpenVPN server with config: push "dhcp-option DNS 192.168.x.x" It is working well, but what I really need is that during the VPN connection I do not want to use my primary resolvers, clients should use only the DNS provided by the server. It can be done with push redirect-gateway, but I do not want to tunnel all connections from the client thru the VPN, only specific networks. Is it possible to do it somehow? Linux clients are OK with a script, on Windows I am not sure

    Read the article

  • How much traffic is high-traffic [closed]

    - by Jack
    My primary interest is in gathering information about the technology used behind public facing websites. Much of the information I read arbitrarily differentiates between high-traffic vs the unstated non-high-traffic websites. This troubles me because I don't have a good grasp of how much traffic is high-traffic. Can anyone help me with this, is there a good rule of thumb? Please don't tell me it depends ;)

    Read the article

  • gparted dont figure any partition

    - by radi
    hi all , i am trying to install ununtu 10.04 lts on my laptop , first i installed it inside windows and when it boot for first time i got the error message "dont find root file system , try partition table to fix the problem " . and when i want to install it on a single partition (normally) and when it told me to chose a partition i dont find any partition (entire disk) . i have 2 primary partitions and 3 logical partitions . please help me thanks .

    Read the article

  • How can I modify keyboard shortcuts for Firefox?

    - by e.James
    I recently started using Firefox as my primary web browser, and I would like to change some of the default keyboard shortcuts, especially the ones used to switch between tabs. Can this be done? I took a peek through the Firefox directory in "Application Support", as well as the application bundle itself, but nothing jumped out. Google searches have also proved fruitless. Any help is appreciated! Update: I'm running Firefox version 3.6 for Mac OS 10.6.2

    Read the article

  • Gparted doesn't detect any partitions

    - by radi
    I am trying to install Ubuntu 10.04 LTS on my laptop. First I installed it inside Windows and when it boots for first time I got the error message "couldn't find root filesystem , try partition table to fix the problem " . When I want to install it on a single partition (normally) and when it told me to chose a partition I don't find any partition (entire disk) . I have 2 primary partitions and 3 logical partitions. How can I proceed with the install ?

    Read the article

  • Setting up a linked server to another server which isn’t in a domain without using SQL authenticatio

    - by Telos
    Server A (SQL2005) is in our primary domain, but server B (SQL2000) is just in a windows workgroup. We are not allowed to join it to the domain, or bad things happen... We also can't enable SQL authentication on server B. We've got domain accounts for A, and matching local accounts on server B. I can connect to B from my local PC or A using SSMS and a domain login, but I can't get the linked server to connect. Any ideas how to do this?

    Read the article

  • How to create NTFS partition in Linux to install Windows 7 from USB?

    - by Michal Stefanow
    I messed up with my computer and need help. Generally: install Windows 7 from USB. Problem: "setup was unable to create a new system partition" When first attempt to install Windows 7 failed I tried Linux live USB, installed distro to HDD, and erased all the existing partitions. Current state (fdisk -l): [writing from other computer so no copy and paste] /dev/sda1 305GB Linux /dev/sda2 7GB Extended /dev/sda5 7GB Linux Swam / Solaris To create a new, NTFS partition: fdisk /dev/sda n (for new) p (for primary) 3 (for partintion number) "No free sectors available" All the HDD was formatted couple of minutes before so there is a lot of free space but how to resize a parition? I cannot find an option for resizing in man fdisk. Some people say I should use gparted but my distro doesn't not contain this package. And my distro doesn't support wireless drivers so I have serious problems with downloading stuff. I tried also using cfdisk but any command results in: "cfdisk bad primary partition 1 partition ends in the final partial cylinder" I tried also removing partition 1 and then creating a new one (so there is no "no free sectors"). I'm receiving a warning: "Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot." After restating: "grub rescue, no known filesystem" It may indicate that some changes have been made BUT when running Windows 7 installed some another error: "Windows cannot be installed to Disk 0 Partition 1" More detailed: "Windows cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS." So formatting drive using Windows 7 installer BUT this time yet another error: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information" Apparently I cannot access logs (how?) and I am back to drawing board with my live USB (this time showing partition as HPFS/NTFS). Any suggestions how to install Windows 7? Should I reinstall Linux to HDD, erase existing partitions once again, and use Parted rather than gparted (parted is included in the distro). Or maybe should I create another bootable USB such as PartedMagic to painlessly create partitions? I just want to install Windows 7 from USB, my laptop is semi-operational and I am ready to receive some help regarding fdisk and creating NTFS partitions. UPDATE: I did as suggested (removed all the partitions) and tried to install in unallocated space. Tried to create a new partition and format it. Same error: "setup was unable to create a new system partition" Came to the conclusion it may have something to do with TrueCrypt I have recently installed. Right now trying to FIX MBR (as I haven't got possibility to create rescue disc without optical drive)

    Read the article

  • How to sync bookmarks across Google Chrome and Mozilla Firefox bookmarks?

    - by ViliusK
    How to sync bookmarks across Google Chrome and Mozilla Firefox bookmarks? As I, currently, understand, Google Chrome puts bookmarks seperatly from Google Bookmarks, which is accessible in Firefox by using Google Toolbar for Firefox. Right? So how should I synchronize my browsers? I use Google Chrome as my primary browser and it works good and bookmarks are synchronized across number of computers I'm using. Thanks, viliusk

    Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >