Search Results

Search found 10206 results on 409 pages for 'tooling and testing'.

Page 307/409 | < Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >

• Improving abysmal 802.11n wireless network

  - by concept

  I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

  Read the article

• nginx rewrite or internal redirection cycle

  - by gyre

  Im banging my head against a table trying to figure out what is causing redirection cycle in my nginx configuration when trying to access URL which does not exist Configuration goes as follows: server { listen 127.0.0.1:8080; server_name .somedomain.com; root /var/www/somedomain.com; access_log /var/log/nginx/somedomain.com-access.nginx.log; error_log /var/log/nginx/somedomain.com-error.nginx.log debug; location ~* \.php.$ { # Proxy all requests with an URI ending with .php* # (includes PHP, PHP3, PHP4, PHP5...) include /etc/nginx/fastcgi.conf; } # all other files location / { root /var/www/somedomain.com; try_files $uri $uri/ ; } error_page 404 /errors/404.html; location /errors/ { alias /var/www/errors/; } #this loads custom logging configuration which disables favicon error logging include /etc/nginx/drop.conf; } this domain is a simple STATIC HTML site just for some testing purposes. I'd expect that the error_page directive would kick in in response to PHP-FPM not being able to find given files as I have fastcgi_intercept_errors on; in http block and nave error_page set up, but I'm guessing the request fails even before that somewhere on internal redirects. Any help would be much appreciated.

  Read the article

• Nginx - Enable PHP for all hosts

  - by F21

  I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

  Read the article

• Cisco Multi-DMZ firewall

  - by BParker

  I need to find a firewall that will give me 1 LAN port, and 5-7 DMZ ports. I have a requirement to replace some FreeBSD systems that are used to run some testing equipment. It is essential that the DMZ ports cannot communicate with each other, but the LAN port can communicate with everyone. That way a user on the LAN can connect to the test systems, but the test systems are isolated entirely and cannot interfere with each other. One of the DMZ's will be connected to a VMWare ESXi server, one to a standard server, and the rest to various types of equipment. The lan port will be connected to the corporate LAN switch. Sorry if i am a little vague, I am just trying to work all this out myself! Currently we have a FreeBSD configured, but the quad port NIC's are pretty expensive, and the PC itself is old, so i would prefer to replace it with a dedicate piece of kit which can do the same job, but more reliably! These test rigs are used all over the place, and get moved quite often, so i am aiming for Cisco kit for ease of configuration and reliability of the hardware itself. Thanks

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Setting up a localhost mail server on Mac OSX

  - by Thom

  I asked this over on stackoverflow. They pointed me here. I would love to be able to test php webapps that require emailing registration info etc. on my mac. I downloaded a version of CommuniGate Pro. I need to mail either to an account inside or outside (whichever is best) of the localhost. Again this would be used for testing purposes to verify and debug my code prior to uploading to a hosting service. Any ideas, help and/or examples would be very much appreciated. If it would be easier I could go over to Windows XP. That would just mean setting up wamp and transfering my files over from the mac side via dropbox. I got the local mailserver to work so I can send emails between accounts. However, I cannot seem to get the php code to work. I know that I am missing something. I see where this has been asked before. I want to add that I am using xampp. In Mac OS 10.6.8. I tried changing the php.ini SMTP command to macintosh-3.local. <?php function email($to, $subject, $body, $headers) { $headers = 'MIME-Version: 1.0' . "\r\n"; $headers .= 'From: <[email protected]>' . "\r\n"; mail($to, $subject, $body, $headers); } ?>

  Read the article

• Rsync: General file/folder synchronization

  - by Rey Leonard Amorato

  I have a file server, which is in-charge of pulling a folder tree from multiple workstations on a daily basis. My current method for this is by using rsync, (which works pretty well provided directory names and/or files remain the same) however, when files are renamed or moved about within subdir1, rsync will copy them over to the server, creating duplicates. I have to manually find and delete extraneous files/folders that had been left on the server during previous syncs. Note that I cannot use rsync's --delete flag because any sync from a workstation will then mirror that particular folder tree, instead of merging them to the server. Visual diagram: Server: Workstation1 Workstation2 Workstation(n) Folder* Folder* Folder* Folder* -subdir1 -subdir1 -subdir1 -subdir(n) -file1 -file1 -file2 -file(n) -file2 -file(n) Is there a simple script (preferably in bash, nothing fancy) that can accomplish the deletion of the extraneous files/folders in the event a file is renamed or moved to a different subdir? Is there a different program, much like rsync that can accomplish this task autonomously and in a much simpler manner? I have looked at unison, but I did not like the fact that it keeps a local database for the syncing info. Any tips at all as to how I am supposed to tackle this? Thank you in advanced for your help. EDIT: I have tried unison just recently and I can safely say it is out of the question now. unison is a bi-directional synchronization tool and from my testing, it mirrors the files existing on the server to all workstations. - This is unwanted. preferably, i would want files/folders to stay within their respective workstations and just merge to the server. AKA uni-directional sync; but with renames/moves propagated to the server. I might have to look into Git/Mercurial/Bazaar as mentioned by kyle, but still unsure if they are fit for the job.

  Read the article

• Subversion all or nothing access to repo tree

  - by Glader

  I'm having some problems setting up access to my Subversion repositories on a Linux server. The problem is that I can only seem to get an all-or-nothing structure going. Either everyone gets read access to everything or noone gets read or write access to anything. The setup: SVN repos are located in /www/svn/repoA,repoB,repoC... Repositories are served by Apache, with Locations defined in etc/httpd/conf.d/subversion.conf as: <Location /svn/repoA> DAV svn SVNPath /var/www/svn/repoA AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> <Location /svn/repoB> DAV svn SVNPath /var/www/svn/repoB AuthType Basic AuthName "svn repo" AuthUserFile /var/www/svn/svn-auth.conf AuthzSVNAccessFile /var/www/svn/svn-access.conf Require valid-user </Location> ... svn-access.conf is set up as: [/] * = [/repoA] * = userA = rw [/repoB] * = userB = rw But checking out URL/svn/repoA as userA results in Access Forbidded. Changing it to [/] * = userA = r [/repoA] * = userA = rw [/repoB] * = userB = rw gives userA read access to ALL repositories (including repoB) but only read access to repoA! so in order for userA to get read-write access to repoB i need to add [/] userA = rw which is mental. I also tried changing Require valid-user to Require user userA for repoA in subversion.conf, but that only gave me read access to it. I need a way to default deny everyone access to every repository, giving read/write access only when explicitly defined. Can anyone tell me what I'm doing wrong here? I have spent a couple of hours testing and googling but come up empty, so now I'm doing the post of shame.

  Read the article

• SQL Server 2005 SP3 on Windows 7 - No Management Studio

  - by Mike Thomas

  I've been trying for a day and a half now to get SQL Server 2005, DEV edition, to work on Windows 7, 64 bit prof. I install from the disk, then run SP 3. I get a failure on the Client Components section of the Installation Progress along with this vague message - Product : Client Components Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQLTools9_Hotfix_KB955706_sqlrun_tools.msp.log Error Number : 1712 Error Description : MSP Error: 1712 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible. I've uninstalled all Visual Studio and tried to make this as clean as possible, and have read a lot of the blog posts, but am really at my wits end about this. I am not a DBA, but I use SQL Server all the time when coding and testing apps. Does anyone have any ideas as to where I can get this sorted out? I've been ati this for a long time and have never encountered an installation as bad as this one. Thanks Mike Thomas

  Read the article

• SpamAssassin bayesian score discrepancies

  - by CaptSaltyJack

  This makes my brain hurt. For some reason, SpamAssassin is giving high scores to certain emails, but when I test them on the command line, they get a low score. This one particular email has this in the header: X-Spam-Flag: YES X-Spam-Score: 8.521 X-Spam-Level: ******** X-Spam-Status: Yes, score=8.521 tagged_above=-9999 required=5 tests=[BAYES_99=3.5, BAYES_999=0.2, HTML_MESSAGE=0.001, NO_RECEIVED=-0.001, NO_RELAYS=-0.001, RAZOR2_CF_RANGE_51_100=0.5, RAZOR2_CF_RANGE_E8_51_100=1.886, RAZOR2_CHECK=0.922, URIBL_RHS_DOB=1.514] autolearn=no Yet when I dump the raw email into a file msg and run sudo su amavis -c 'spamassassin -t msg', I get this output: Content analysis details: (3.8 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 1.5 URIBL_RHS_DOB Contains an URI of a new domain (Day Old Bread) [URIs: cliobeads.com] -1.0 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message -0.0 BAYES_20 BODY: Bayes spam probability is 5 to 20% [score: 0.1855] 1.9 RAZOR2_CF_RANGE_E8_51_100 Razor2 gives engine 8 confidence level above 50% [cf: 100] 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 100] 0.9 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) I'm really confused as to why when the email comes in, it gets a completely different score attached to it than when I run spamassassin -t. Is there some other way I should be testing emails? Also, my users have the ability to drag false positives into a folder called "False Positives," and every day a cron job fires off that runs this on every message in every user's folder: sa-learn --dbpath=/var/lib/amavis/.spamassassin --ham /tmp/*-*.eml >/dev/null I ran sudo locate bayes_toks and there's definitely only one bayes DB on the system, in /var/lib/amavis/.spamassassin. I'm clueless, any help would be great and may help restore my sanity!

  Read the article

• VPN being blocked somewhere between either my BT2700HGV and DLink DFL-210

  - by Dom

  Hi, For some time I have been unable to get VPN working through my set up. I have a BT2700HGV Router (2 Wire Model) and as a firewall I have the Dlink DFL-210. You can't turn the firewall completely off on the BT2700HGV so I have it set to DMZplus mode for the Firewall. In theory this should then allow the VPN ports through. On the Firewall I have a series of rules set up and one is the pptp-allow rule which should allow access on the correct ports also. When I try to connect via VPN however the client machine gets an error 809. If I check the log on the Dlink firewall, I see this record: http://dl.dropbox.com/u/1041315/packetdrop.PNG The laptop I am testing the vpn with is connected directly to the BT2700HGV router and I am trying to VPN from it onto 81.138.86.217. I can't work out whether I have some sort of problem in the set up of the rules on my firewall or if the BT router (even though it's in DMZplus mode) is still blocking port 1723. I read somewhere that there where problems because BTs Openzone held onto this port for some reason. Any help would be greatly appreciated. If you need further screen shots or information then please let me know. I wasn't able to create new tags for the router and firewall name or insert the picture in as I am new to the forum. Dom :-)

  Read the article

• Why does "commit" appear in the mysql slow query log?

  - by Tom

  In our MySQL slow query logs I often see lines that just say "COMMIT". What causes a commit to take time? Another way to ask this question is: "How can I reproduce getting a slow commit; statement with some test queries?" From my investigation so far I have found that if there is a slow query within a transaction, then it is the slow query that gets output into the slow log, not the commit itself. Testing In mysql command line client: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=benchmark(9999999, md5('This is to slow down the update')) WHERE id = 21560; Query OK, 0 rows affected (2.32 sec) Rows matched: 1 Changed: 0 Warnings: 0 At this point (before the commit) the UPDATE is already in the slow log. mysql commit; Query OK, 0 rows affected (0.01 sec) The commit happens fast, it never appeared in the slow log. I also tried a UPDATE which changes a large amount of data but again it was the UPDATE that was slow not the COMMIT. However, I can reproduce a slow ROLLBACK that takes 46s and gets output to the slow log: mysql begin; Query OK, 0 rows affected (0.00 sec) mysql UPDATE members SET myfield=CONCAT(myfield,'TEST'); Query OK, 481446 rows affected (53.31 sec) Rows matched: 481446 Changed: 481446 Warnings: 0 mysql rollback; Query OK, 0 rows affected (46.09 sec) I understand why rollback has a lot of work to do and therefore takes some time. But I'm still struggling to understand the COMMIT situation - i.e. why it might take a while.

  Read the article

• JBoss7 load balancing with mod_proxy_balancer - session not working

  - by Phil P.

  I am trying to set up mod_proxy_balancer for routing requests to 2 jboss7-servers. For the time being I am testing this setup on my local machine, using following config in httpd.conf: ProxyRequests Off <Proxy \*> Order deny,allow Deny from all </Proxy> ProxyPass / balancer://mycluster/ stickysession=JSESSIONID|jsessionid scolonpathdelim=On <Proxy balancer://mycluster> BalancerMember http://localhost:8080 route=node1 BalancerMember http://localhost:8081 route=node2 Order allow,deny Allow from all </Proxy> and in the standalone.xml file of each jboss I have defined the jvmRoute system property: <system-properties> <property name="jvmRoute" value="node1"/> </system-properties> At http:// localhost/myapp the application is accessible but the java-session is not build up correctly. Consequently the authentication is not working. The funny thing is, that everything is working if I turn off one JBoss-instance. As I have tried a couple of settings already, I am thankful for any further suggestions.

  Read the article

• Setting up CIFS ISO Repository for Xen

  - by user85610

  I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

  Read the article

• Exchange 2003 IMAP not working for some users

  - by John Gardeniers

  We normally don't have a need for IMAP connections from outside the company network but in order to allow a one user to use IMAP on a portable device I've turned it on and opened port 993 on the firewall. When the user in question was unable to get connected I tested this using Outlook remotely. Start by creating a new IMAP account in Outlook using a test account. No problems, it worked perfectly. Now try the same thing using the account of the user who actually needs to connect and it's a no-go. Outlook simply keeps prompting for logon credentials. Next I tried using my own account and that too failed. Testing with a couple of other accounts worked perfectly. Interestingly enough, with my own account I've used IMAP on a MAC before (internally) without a problem and I'm not aware of anything that has changed which could affect IMAP on my account. Checking the user settings in ADUC showed that all accounts have the same Exchange protocol settings. Specifically, IMAP is enabled. A check of the event logs on the server reveals no entries for the connection attempts, making this kind of difficult to debug. Has anyone here encountered such a situation and, even more importantly, what caused it?

  Read the article

• Reporting Services 2008: Virtual directories not visible in IIS7..

  - by Ryan Barrett

  I'm having some problems with Reporting Services on Windows Server 2008 Standard. I've installed server 2008 as a standalone webserver (with roles/features of an web application server). On top of that, I've installed Sql Server 2008 Standard with Reporting Services (and the rest of the BI tools). Problem is, I want to modify the rights on the virtual directories. However, the virtual directories aren't appearing in IIS 7 management tool. I can connect to reporting services, albeit only with the local windows admin account. I can download Report Builder fine from an session on the server (but not from any clients). I've tried removing the default website from IIS, and that stops the reporting services website from working. The machine (a VM) isn't for production use - it's used on a closed network internally for testing and development purposes. I need to be able to let my fellow developers login without a password, and they must be able to install ReportBuilder 2.0. Must not be linked to a domain or active directory in any form. Google isn't much help, the results suggest I modify the virtual directory Does anyone have any suggestions?

  Read the article

• SSH client and Command Prompt replacements Windows look-and-feel

  - by Oddthinking

  The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

  Read the article

• Can't connect to MS SQL Server database using SSMS

  - by Charles

  I have a database on line with Godaddy (who uses SQL Server 2005). They provide basic management tools, but tell you that for more advanced tools you can connect directly using SSMS. I followed their instructions to ensure my online database will accept remote connections, and can apparently log in using SSMS with success (after giving my hostname and access data). However: Now from in SSMS, when attempting to expand the "Databases" folder tree, I get the following error: Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The server principal "cmitchell" is not able to access the database "3pointdb" under the current security context. (Microsoft SQL Server, Error: 916) The irony is that 3pointdb isn't my database. It is just another in a long list of databases that show up when I access my Godaddy backend. From SSMS, I selected the default database to be the name of my database, which it did locate on the list when I browsed. Still same error message. It is trying to connect to a database that isn't mine! :( Godaddy support, after a bit of testing, said the problem isn't on their end. it's on mine. – Charles

  Read the article

• 554 5.7.1 <mail_addr>: Relay access denied centos postfix

  - by Relicset

  I have problem in send mail from postfix in centos I have following setup mail server postfix for sending mail but I am getting error. As in the link I tried following commands telnet localhost smtp Trying ::1... Connected to localhost. Escape character is '^]'. 220 mydomain.com ESMTP Postfix ehlo localhost 250-mydomain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN mail from:<domain.com> 250 2.1.0 Ok rcpt to:<[email protected]> 554 5.7.1 <[email protected]>: Relay access denied Edit-1 In terminal this works echo TEST | mail -v -s "Test mail" [email protected] my postconf -n shows belog information alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = localhost inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = dummy.com myhostname = dummy.com mynetworks = all mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 What configuration I have to perform to send mails from my server.

  Read the article

• OpenVPN: ifup tap0 drops all connections

  - by raspi

  I'm trying to create star shaped "virtual" LAN with OpenVPN which is not connected to physical network. ie. tap0 packets should not go to eth0. Packet should only go through OpenVPN to connected clients. This setup works with my OpenVPN testing machine which runs Virtual Box but not on my actual server which is running on top of Xen. Both servers are running Ubuntu Intrepid. /etc/network/interfaces: iface tap0 inet manual address 10.10.10.1 netmask 255.255.255.0 gateway 10.10.10.1 /etc/openvpn/server.conf mode server tls-server port 1194 proto udp dev tap client-to-client ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/servername.crt key /etc/openvpn/easy-rsa/keys/servername.key dh /etc/openvpn/easy-rsa/keys/dh384.pem ifconfig-pool-persist ipp.txt server-bridge 10.10.10.1 255.255.255.0 10.10.10.128 10.10.10.250 push .route 10.10.10.1 255.255.255.0 keepalive 5 60 comp-lzo persist-key persist-tun status /var/log/openvpn-status.log log-append /var/log/openvpn.log verb 3 user nobody group nogroup ifup tap0 on Virtual Box: everything ok, SSH keeps running. But on Xen SSH connection drops and I have to reboot whole machine. What I'm missing?

  Read the article

• Disk IO slow on ESXi, even slower on a VM (freeNAS + iSCSI)

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas 8.0.4). Those two machines are connected to each other with Gigabit ethernet. The raid-z volume is divided into three parts: two zvols, shared with iscsi, and one directly on top of zfs, shared with nfs and similar. I ssh'd into the freeNAS box, and did some testing on the disks. I used ddto test the third part of the disks (straight on top of ZFS). I copied a 4GB (2x the amount of RAM) block from /dev/zero to the disk, and the speed was 80MB/s. Other of the iSCSI shared zvols is a datastore for the ESXi. I did similar test with time dd .. there. Since the dd there did not give the speed, I divided the amount of data transfered by the time show by time. The result was around 30-40 MB/s. Thats about half of the speed from the freeNAS host! Then I tested the IO on a VM running on the same ESXi host. The VM was a light CentOS 6.0 machine, which was not really doing anything else at that time. There were no other VMs running on the server at the time, and the other two "parts" of the disk array were not used. A similar dd test gave me result of about 15-20 MB/s. That is again about half of the result on a lower level! Of course the is some overhead in raid-z - zfs - zvolume - iSCSI - VMFS - VM, but I don't expect it to be that big. I belive there must be something wrong in my system. I have heard about bad performance of freeNAS's iSCSI, is that it? I have not managed to get any other "big" SAN OS to run on the box (NexentaSTOR, openfiler). Can you see any obvious problems with my setup?

  Read the article

• Emails sent to outlook.com not being delivered

  - by imukcedup

  I'm having an issue that is a little strange. I have a cPanel webserver that I own and have root. I was testing out emailing and noticed some issues. When I send an email to outlook.com address the email sends ok but nothing is recieved at the outlook mailbox. I also dont get an 'email delivery failure notification' in any mailbox. 2014-06-12 09:53:47 SMTP connection from [127.0.0.1]:45334 (TCP/IP connection count = 1) 2014-06-12 09:53:47 1Wv5Rr-0003rA-2K <= [email protected] H=localhost (ourdomain.com) [127.0.0.1]:45334 P=esmtpa A=dovecot_login:joe S=667 [email protected] T="This is a test message" for [email protected] 2014-06-12 09:53:47 SMTP connection from localhost (ourdomain.com) [127.0.0.1]:45334 closed by QUIT 2014-06-12 09:53:50 cwd=/var/spool/MailScanner/incoming/1029481 5 args: /usr/sbin/exim -C /etc/exim_outgoing.conf -Mc 1Wv5Rr-0003rA-2K 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K SMTP connection outbound 1402581230 1Wv5Rr-0003rA-2K ourdomain.com [email protected] 2014-06-12 09:53:50 1Wv5Rr-0003rA-2K => Test Account <[email protected]> R=archive_outgoing_email T=archiver_outgoing 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K => [email protected] R=dkim_lookuphost T=dkim_remote_smtp H=mx1.hotmail.com [65.54.188.110] X=UNKNOWN:AES128-SHA256:128 C="250 <[email protected]> Queued mail for delivery" 2014-06-12 09:53:52 1Wv5Rr-0003rA-2K Completed I have checked the outlook.com's spam folders and its not in there either. This is a new IP address allocation from our ISP and there was a block on gmail addresses, so we know it was used for spam. But with gmail we got a notifaction of failure and I know outlook/microsoft also send out notification. Does anyone know what could be happening here? Thanks

  Read the article

• DansGuardian/Squid Traffic doesn't get back to user

  - by DKNUCKLES

  I've purchased a Squid appliance that I'm attempting to implement, however the lack of documentation has left me a bit high and dry. Forgive me if this is a silly question, but this is my first attempt at implementing Squid. From what I can ascertain from the documentation (or lack thereof), the users connect to DansGuardian first at port 8080 where the filtering is done, at which point it forwards it to the Squid appliance at port 3128. The traffic is then sent to the internet. The setup I have is as follows Gateway (MikroTik router) : 192.168.88.1 Squid/DansGuardian :192.168.88.100 Client : 192.168.88.238 Client --- Gateway --- Proxy --- Internet I have set up a simple NAT rule to forward all traffic from the client machine (for testing purposes) to go to the DansGuardian. The traffic seems to get there, although I see a lot of SYN_RECV w/ a netstat -antp command on the virtual appliance machine. From this I gather that the traffic is NOT being routed back to the client machine. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN - tcp 0 0 192.168.88.100:8080 192.168.88.238:55786 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55787 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55785 SYN_RECV - tcp 0 0 192.168.88.100:8080 192.168.88.238:55788 SYN_RECV - tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - Is this a routing issue or an issue with the Squid Appliance?

  Read the article

• Opening port 80 in router has no results

  - by Ricardo Pieper

  A friend of mine has a ADSL modem and I need to forward some ports. I have already forwarded the 1521 port (Oracle) and it's working fine. Now I need to forward the port 80. I already set up his IIS bindings to this port, and also forwarded the port like this video shows: https://www.youtube.com/watch?v=DLKD-fyexoo So I think I did everything correctly. The local IP address is also the same as the machine where the IIS server is running. I'm sorry, but I can't post images since i don't have 10 points :( Somehow I can't forward this port, yougetsignal.com keeps saying that the door is closed. When I try to open the port, the Control Panel says me that I have to access the control panel in the 8080 port, because the 80 port will be open. Ok, that's fine. But I'm still able to access it in the 80 port, and when I try to access it in the 8080 port, it doesn't work. I'm trying it with the TPLINK 8816, but I also tried to open it in the Opticom DsLink 279, and it didn't worked (using another machine), I got the exact same results. He has a dynamic IP address, but he is also using No-ip, so I can always access his Oracle database in a certain static address. The 1521 port is open. I also tried to disable the firewall in Windows, but that makes no sense to me, since the router doesn't really open the port 80. Clearly I'm missing something. I have never done it in my life, so I dont know how to proceed. Restarting the router was the first I did, no results. I'm accessing his laptop through TeamViewer, so I'm testing the port outside his local network. Edit: My ISP says that they allow to open ports, and the 1521 port is opened. What could I do to open the 80 port?

  Read the article

• OpenVPN connected but not internet access on the client

  - by Stefan

  I've setup OpenVPN following this tutorial, and everything works fine except that I don't have an internet connection on the client while connected to VPN. http://www.howtoforge.com/internet-and-lan-over-vpn-using-openvpn-linux-server-windows-linux-clients-works-for-gaming-and-through-firewalls My VPS server config is as follows (Ubuntu): dev tun proto udp port 1194 ca /etc/openvpn/easy-rsa/keys/ca.crt cert /etc/openvpn/easy-rsa/keys/server.crt key /etc/openvpn/easy-rsa/keys/server.key dh /etc/openvpn/easy-rsa/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun status /var/log/openvpn-status.log verb 3 client-to-client push "redirect-gateway local def1" #set the dns servers push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" log-append /var/log/openvpn comp-lzo plugin /usr/lib/openvpn/openvpn-auth-pam.so common-auth My client config is as follows (Windows 7): dev tun client proto udp remote XXX.XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert stefan.crt key stefan.key comp-lzo verb 3 auth-user-pass redirect-gateway local def1 I've turned off the firewall on the server for testing purposes (it doesn't help), and tried both wired and wireless connecting on the client. I've tried many Google results... but nothing seems to help. Can you help me? Thanks so far...

  Read the article

< Previous Page | 303 304 305 306 307 308 309 310 311 312 313 314  | Next Page >