Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 308/349 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• Starting old computer - nothing shown on screen at boot

  - by Jonas

  I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

  Read the article

• Win 8.1 Hyper-v Full Screen and VPN problems

  - by tr0users

  I need to connect to my office using Cisco VPN software (RSA). Once connected all my internet traffic goes through the employer's VPN and this prevents me from listening to spotify. As a way around this I created a Win 2012 VM that I run in hyper-v from my Windows 8.1 Client. First I RDP to the VM, then I connect to the VPN. This forces the RDP session between my host laptop and the VM to close. I then open the hyper-v manager and double-click my VM to get a connection back (not great because I don't get the use of copy & paste this way). Previously when I opened my VM this way I would have full screen. I'm using a 1920x1080 monitor. Today when I re-open my connection to the VM it is displayed in a window that uses maybe 75% of the full screen. I have tried the menu option View\Full Screen Mode only centres the screen and apply black borders around the outside. Could anyone please suggest how I may solve the VPN or Full Screen problems? Thanks Rob.

  Read the article

• Windows disk change monitoring for malware analysis

  - by SuperDuck

  Not sure if this question belongs to here, because it has some relations with 'serverfault' (system backups) and 'stackoverflow' (software analysis). I'm looking for a solution to monitor disk changes on a Windows system and selectively revert them. It should be able to handle live files like registry parts, so may need to be an offline backup software. It shouldn't silently pass over files which the current admin user doesn't have permissions on (files with no permission entries or owned by the 'system' user) Registry change tracking would be a bonus but is not a requirement I use virtual machines for malware analysis, there is even no solution to list file changes in disk snapshot files (delta VMDK). I currently use Ashampoo for monitoring changes. Though it's the best one between similars, it's not a good software and hasn't really evolved in many 'platinum', 'deluxe' versions released in the last 10 years (it even used non-resizable windows until the latest version). The real problem is it misses some disk / registry changes. Perhaps it only compares modification dates and doesn't catch a change if the dates are preserved. So, I think the solution should compare files using hashes, or file sizes at least. There are numerous backup software out there and I'm sure one can handle this, offline or online.

  Read the article

• Extend Linux Desktop to another X Windows Display

  - by unknown (google)

  Hello, I am a long time Linux user of the Xinerama and other technologies for extending a desktop to multiple monitors. However when I travel with my laptop I miss the multi-monitor support I enjoy at home. Recently I acquired a second laptop for a low price. Both laptops are running Fedora (versions 10 and 11 respectively). I use Gnome as my primary desktop environment. I know about synergy. I use synergy all the time to control the screen of other Windows / Linux systems I use. I would like to know, can I sit both my primary and secondary laptops together and achieve a Xinerama-like extended desktop environment? Ideally I would like to start a GNOME session on my primary laptop. And then start a X-Windows Desktop on my secondary laptop and extend my primary laptop's desktop onto it. I would like to be able to move Windows from the primary desktop to the secondary laptop desktop. Would I need to use synergy to do this with some other bit of X-Windows technology? Or is there X-Windows technology that will do all this for me? I am familiar with X Windows ability to display applications remotely. I am also familiar with Nomachine's NoX.

  Read the article

• Proper approach to debug PC startup problems (POST)

  - by saurabhj

  My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

  Read the article

• How can I confirm that burn process is completed successfully??

  - by infant programmer

  Just now I tried to make a duplicate copy of my Windows XP Pro SP3 CD. I had set 32X speed while the max speed allowed is 48X. And checked "Verify the Data after burning". I didn't observe how much % did it complete. But after 15 mins (which is sufficient period to burn disc), I heard "Fatal Error" sound. When I saw the monitor, There was a message box which was showing "Error while burning Disc", I saved the error log which you can find here click_me. How do I acknowledge that burning process is done?? Well. I my PC is able to read the cd and it is bootable too.. I am not sure .. whether the burning process got failed or the verify Process! Please let me know if you have come across or aware of such situation .. As it is XP installation CD .. I don't want to do trial and error method. regards,

  Read the article

• Measuring performance indicators on a cluster

  - by Aditya Singh

  My architecture is based on Amazon. A ELB load balancer balances POST requests among m1.large instances. Every instance has a nginx server on port 80 which distributes the requests to 4 python-tornado servers on backend which handle the request. These tornado servers are taking about 5 - 10ms to respond to one request but this is the internal compute time of every request. I want to put this thing on test and i want to measure the response time from ELB to upstream and back and how does it vary when the QPS throughput is increased and plot a graph of Time vs. QPS vs. Latency and other factors like CPU and Memory. Is there a software to do that or should i log everything somewhere with latency checks and then analyze the whole log to get the stuff out. I would also need to write a self-monitor which keeps checking the whole response time. Is it possible to do it with a script from within the server. If so, will it be accurate ?

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• Did my hard drive fail or is it something else?

  - by Julian

  Last night while I was watched a movie on my laptop the external monitor just went blank and the built-in display froze. Weird I thought, so I restarted it only to be greeted with this heart-breaking message. "No Operating System Found". After a few panicked restarts I accepted the fact that my hard drive might be done :(. Being the resourceful technie that I am, I whipped out Ubuntu Live on my old Flash Drive and was up and running before day break. I cannot access the hard drive through Ubuntu (which I expected) but I also cannot access my DVD drive either! This got me thinking that it might not be the hard drive and some other component that they hdd and the dvd uses. Hopefully this is the case. Which component is the most likely culprit? What tools can I use from Ubuntu Live on my USB flash drive to find out? I'm in a bad place without my hdd, thanks in advance for any assistance provided! P.S. My laptop makes a weird noise when I try to access or eject my DVD within the slot. Also my HDD makes a weird noise sometimes. Not sure how to describe it. System Specs: Dell 1558

  Read the article

• Get Matrox Millenium video card working in Ubuntu 9.10

  - by wcoenen

  I have installed Ubuntu 9.10 on an old PC and it is mostly working, except for some heavy drawing defects that show up whenever I start dragging a window or scrolling inside a window or menu. It looks like the video driver copies the rectangle being moved to the wrong location. I have taken a look in /var/log/Xorg.0.log and the following line shows the detected video card: (--) PCI:*(0:0:8:0) 102b:0519:0000:0000 Matrox Graphics, Inc. MGA 2064W [Millennium] rev 1, Mem@ 0xf9800000/16384, 0xfb000000/8388608, BIOS @0x????????/65536 (==) Using default built-in configuration (30 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default mga Device 0" Driver "mga" EndSection How do I fix the drawing defects? It turned out that the 24 bit color depth (automatically selected by ubuntu 9.10) was the problem; apparantly the mga driver doesn't handle this well for cards with little memory. I took the following steps to resolve the issue (you can skip the first three steps if you already have a semi-working xorg.conf file): Reboot ubuntu in recovery mode, to get a root console without X running. Run Xorg -configure to generate a xorg.conf.new file Copy the file to /etc/X11/xorg.conf with cp xorg.conf.new /etc/X11/xorg.conf (assuming it didn't exist yet; that's why I generated it) Open the new config file with sudo nano /etc/X11/xorg.conf and make sure the screen section is configured for 16 bit color depth like this: Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection EndSection I can't guarantee those were the only important changes I made - I tried a few things in my attempts to create a valid xorg.conf file. But I'm pretty sure that the screen section was the important part.

  Read the article

• pdns-recursor allocates resources to non-existing queries

  - by azzid

  I've got a lab-server running pdns-recursor. I set it up to experiment with rate limiting, so it has been resolving requests openly from the whole internet for weeks. My idea was that sooner or later it would get abused, giving me a real user case to experiment with. To keep track of the usage I set up nagios to monitor the number of concurrent-queries to the server. Today I got notice from nagios that my specified limit had been reached. I logged in to start trimming away the malicious questions I was expecting, however, when I started looking at it I couldn't see the expected traffic. What I found is that even though I have over 20 concurrent-queries registered by the server I see no requests in the logs. The following command describes the situation well: $ sudo rec_control get concurrent-queries; sudo rec_control top-remotes 22 Over last 0 queries: How can there be 22 concurrent-queries when the server has 0 queries registered? EDIT: Figured it out! To get top-remotes working I needed to set ################################# # remotes-ringbuffer-entries maximum number of packets to store statistics for # remotes-ringbuffer-entries=100000 It defaults to 0 storing no information to base top-remotes statistics on.

  Read the article

• What to do with old laptop screens?

  - by Lord Torgamus

  This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

  Read the article

• Nagios DNX plugins

  - by danneh3826

  I'm toying with the idea of multiple Nagios instances setup to monitor our infrastructure. I've looked at all the various methods of distributed Nagios checks, and I think DNX comes out the closest. DNX handles failure of worker nodes, that's fine. What happens if the main DNX server fails though? Is there a way to replicate the server too? I'm using AWS EC2 primarily, so I can utilise Elastic Load Balancing for the web UI, but I need to be able to handle the AZ where the monitoring server is to fail over, and essentially for a second to pick up the checking load (active/passive, active/active, so long as it doesn't fail completely) The other thing I'm trying to solve is an issue with routing. What I'd like is to have multiple nodes report a fault before Nagios confirms it as critical. Not the NRPE checks, as they're pretty self explanitory, but things more like check_ping. I often have routing issues out of AWS to certain datacenters, so Nagios can often report bad/no ping/timeout as a critical issue, even though the machine in question is working fine. Would it be possible to have a setup where a worker complains a service check is critical, and have a second worker node (positioned in another datacenter/AZ) also report the service as critical before the Nagios central server issues a critical alert? I realise I might be asking a bit much (how far down the line do you go setting up failover systems before it starts to get ridiculous), however surely someone must have thought of this scenario when developing DNX?

  Read the article

• MySQL permissions error when showing databases

  - by Tony

  I was trying to install homebrew and very very stupidly did this: sudo chown -R $USER /usr/local The Homebrew instructions say to do this and I'm not much of a sysadmin so I took their word for it. Lesson learned (although I wouldn't really know how to test this...seems like an "undo" script would be super valuable here) Anyway, what is done is done, but now I get this error: $ mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 548 Server version: 5.1.33 Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> show databases; ERROR 1018 (HY000): Can't read dir of '.' (errno: 13) I tried chown-ing back to root with no avail. Does anyone know how I can fix this without reinstalling mysql? Optionally, if I have to reinstall mysql, how can I dump my databases without access to the command line so I don't lose all of my data. Thanks!

  Read the article

• Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

  - by Peeter Joot

  I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something. Edit: Re-installed windows on this system yesterday. That's my usual solution to issues I don't feel like diagnosing, like this one.

  Read the article

• Remote Desktop leaves host unresponsive

  - by Jeff Dalley

  I have my desktop PC at home set up to accept remote connections, and I often connect to it from work on my laptop via mstsc.exe. However, every time I remote to it, I find when I go home that despite the monitor being on - it's not receiving an image and it looks as though the computer is hibernating/asleep. I basically have to restart it whenever I get home and I know there's an answer for why its doing this. More details: When exiting the remote session, I have tried both logging off the account, and closing the RDP window without logging off; both give the same result. When I get home to the desktop I of course try moving the mouse, ctrl+alt+del to see if its responsive to restart, multiple key-press to see if I can get any audio out of it; It seems pretty obvious its sleeping/hibernating in some way: Nothing happens in any of these cases and a physical restart is necessary. Both desktop and laptop are running Windows 7 Ultimate. I'm thinking it really is sleeping/hibernating it, and I'm not sure why because left alone my desktop's power options are set to never turn off the HDD or change its state - I leave it on 24/7. This could be a stupid error on my part but I just can't see it! Thanks.

  Read the article

• Why is my computer randomly restarting? How can I fix it?

  - by kinglime

  I have a custom built desktop computer that I've been using since about a year ago. The main specs are: ASUS P8Z68-V LE Motherboard Intel Core i7 2600k Corsair Vengeance 16GB Ram ASUS ENGTX570 GPU Corsair TX650M PSU I was running an overclock of 4.4ghz for my cpu (I have a Hyper212 EVO) and 1600mhz for my RAM but have it currently turned off due to my issues. I am also currently running Windows 8 but this problem occured in Windows 7 too. Basically my issue is that seemingly randomly, with no pattern my PC will reset itself and ASUS Anti-Surge will alert me that something went wrong. This issue is not related to system stress. I can run it fine for an hour maxxed out on Prime95 then later I can be watching a mere YouTube video when it will randomly reset. This has been occurring probably for the last two weeks and it seems to be getting worse. I believe this might be related to the power supply but when I monitor it in the bios and in Windows it appears to be putting out the proper voltages. Also possibly related or not but my Nvidia drivers frequently temporarily fail and then warn me of some kind of kernel error? If I have to buy a new power supply that is what I'll do but I want to make damn sure that's the only issue at hand. Thank you everyone in advance, please help me diagnose the issue and tell me what I can do to fix it. If you need any additional info about my setup please ask me.

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Dedicated Mouse and Keyboard on Virtual Box VM

  - by Myersguy

  To all super users, Currently I am trying to run virtual box on my second monitor, with a dedicated mouse and keyboard. However, doing so has not proven easy. There has been times where the mouse works, but not the keyboard, vice versa, or nothing works at all. The biggest problem I am running into is this: When enabling the USB mouse and keyboard from the VM, I get an error: 'USB Device is busy with a previous request.' The only thing that is using second mouse and keyboard, however, is Windows. The other error I have received stated that the VM was unable to create a proxy for the device. Additionally, the VM occasionally will disable the secondary keyboard entirely, requiring me to unplug and replug it into my PC to re-enable it again. Keyboard auto-capture is disabled, and while a solution I was reading online stated to turn off mouse integration, that option is grayed out on my machine. Any help would be appreciated. Thanks. /firstquestion.

  Read the article

• Nagios send mail when server is down

  - by tzulberti

  I am using nagios 3.06 to monitor the servers. When a service is critical, it sends a mail, but when a server is down no mail is sent. Even if all the services go to critical state, no mail is sent. I have the following configuration: define command {     command_name notify-host-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$" "******** Nagios ****\n\n Host: $HOSTNAME$\n Description: the server is down" } define command{     command_name notify-service-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$: $SERVICEDESC$ ($NOTIFICATIONTYPE$)" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\nDate/Time: $LONGDATETIME$\nAdditional Info:$SERVICEOUTPUT$" } The python script is a script to sent a mail. It works if I execute it from the command line, but it doesn't sents an email from nagios. What I am doing wrong? UPDATE: The contact data is: define contact{     contact_name root     alias Root     service_notification_period 24x7     host_notification_period 24x7     service_notification_options w,u,c,r     host_notification_options d,r     service_notification_commands notify-service-by-email     host_notification_commands notify-host-by-email     email [email protected] } define contactgroup{     contactgroup_name admins     alias Nagios Administrators     members root }

  Read the article

• Window too big to fit the screen!

  - by syockit

  I'm using Windows 7 on a 8.9' monitor with 1280x768 screen resolution. Using the might of arithmetics, I'm able to determine that my dpi (actually ppi) should be 167. Win7 is really helpful in that it doesn't have to restart to apply new dpi settings, unlike its predecessors (though I'd rather it applies straight away). The problem with small monitors in Windows is that when you come across windows too big to fit the screen, you can't move the title bar far above it. In X window managers I used in the past, you could alt-drag the window to anywhere you want, but in Windows, even if you alt-space and select move, it will automatically push the window back until the title bar is visible. I'm looking for a solution that either: allows me to move window freely without regard to titlebar visibility, or attach a scrollbar to existing window, or EDIT: create virtual desktops that allow me to span windows over 2 desktops, or EDIT 2: allow me to set larger virtual resolution, then pan & scan. EDIT 3: I found some progs that might do some of the above: 1) AltDrag allows me to drag, resize using alt and left/right mouse button. Neat! Best solution so far. 2) GiMeSpace Desktop Extender is supposed to allow me to scroll desktop. Didn't work. The other new version, GiMeSpace Ultimate Taskbar worked, but it destroys my Superbar, replacing it with its map.

  Read the article

• Network Sniffing and Hubs

  - by Chris_K

  This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

  Read the article

• Need a helpful/managed VPS to help transition from shared hosting

  - by Xeoncross

  I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

  Read the article

• NGINX AEGIR DRUPAL permissions 403 forbidden

  - by nlam

  New to nginx Installed on mac os for use with aegir & drupal It's running great, but I have a problem with permissions My hostmaster installation is here : /var/aegir/hostmaster-6.x-1.7/ The hostmaster settings file here : /var/aegir/hostmaster-6.x-1.7/sites/aegir.ldev/settings.php Permissions for settings.php are set to 440 automatically by hostmaster, but I'm getting a 403 forbidden page because of this. If I give read permission to "other" the site works great (444 or even 004). Drupal is also telling me that the file system paths are not writable (sites/aegir.ldev/files & sites/aegir.ldev/private). I would have to change the permissions there too. Moreover, I would also have to change permissions for every site installed by hostmaster. Anyway. In my nginx.conf I have the following : user "myuser" _www; Owner and group for settings.php, /sites/example.ldev/files, /sites/example.ldev/private are "myuser" and "_www". Changing permissions to 004 solves this problem, but really confuses me. Why do "other" have permission and not owner or group? I've checked the processes running in activity monitor. Nginx is running as "myuser". Except for one process running as root. So I'm stumped. Hope someone can help.

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >