Search Results

Search found 10634 results on 426 pages for 'pass'.

Page 308/426 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• EFI vs MBR - Installing Windows Server 2008 R2 or 2012 on 8TB

  - by Riaan de Lange

  I'm having some difficulty installing Windows Server 2008 R2 and Windows Server 2012 on an Intel Server platform. The server specs is as follows: Intel Grizzly Pass Server System - R2308GZ4GC 2x Intel Xeon 2620 - 2.0 GHZ - BX80621E52620 132 GB of Memory REG-DIMM - TS1GKR72V6H 4x Seagate Constellation ES 2TB 3.5" 7200rpm 6GB/S - ST32000645NS Intel Big Laurel 4CH 6G SAS RAID 512MB - RS2BL040 On the Intel RAID Controller Setup, I have setup the HDD to be in RAID-0 - for testing purposes. (Ultimately configured in RAID-5) So, the total size of HDD space I can use is 7.6 TB something... When I install the Server OS's, they don't seem to go beyond 2 TB (1.76 TB) I have read up on EFI and UEFI boot, and this seems to work in 2012, but I could not install any drivers for the motherboard... So, I also tried EFI for 2008R2, and this worked while installing the OS, it did not however work with the Windows Boot Manager option in the BIOS. It kept on freezing once it tries to load the partition. My idea was to allocate the complete 8 TB for the OS, and load a few VM's on there. I have now started with a new approach where I'll have a 256 GB OS Partition, and a secondary 7.5 TB Data partition. Oh, and I also did a diskpart - convert disk to gpt whilst installing 2008R2. The whole disk was accessible, 7.6TB Can anyone please clarify that EFI/UEFI is meant for larger boot volumes? Bigger than 2TB. If I were to have an ideal situation where my OS is run on a SSD, 256GB, and I can attach the 8 TB drives as normal disk to the OS? I'm I correct in saying that if I wanted to boot from a 8TB partition, I would need to force the BIOS to boot from EFI? The limit for MBR is 2 TB as far as I know now... *FYI: The motherboard is EFI-ready

  Read the article

• samba "username map" stopped to work

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user Kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems. p.s. i've asked this question at serverfault but no answer came. Maybe I have more luck with this forum. Sorry for duplicate if any of you reads both.

  Read the article

• Windows XP restarting repeatedly after a fresh restore

  - by DWilliams

  I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

  Read the article

• Apache / PHP Begins to Deny SQL Requests after about 2000

  - by Daniel Stern

  We have a web page on our server that we use to run administrative scripts. For example, we might run the script "unenrolStudents()" which runs 5,000 SQL SET commands one after another and sets 5000 student entries in an SQL database to unenrolled. However, we are finding that after running a few thousand queries (it is not totally consistent) we will be "locked out" by our server. SYMPTOMS OF LOCKING OUT: - unable to connect to server with winSCP - opening putty with that connection shows a blank screen (no login / pass) - clearing cookies / cache in chrome does NOT fix locking out - other computers in the office ALSO become locked out - locking out can be triggered with a high frequency of requests (10000 in 1 second) or by less over time (10000 in 500 seconds - this will still cause a lockout even though the frequency is much less) We believe this is a security feature of our own Apache. I know we are using Suhosin but I didn't configure it so I don't know. How can I disable this locking effect so that I can confidently run all my SQL requests and they will go through? Has anyone else dealt with this and found workarounds? Thanks DS

  Read the article

• VSFTPD 530 Login incorrect

  - by sc.

  I'm trying to get a vsftpd server set up on CentOS 5.3 x64. I'm not able to get any local user login's to work. Here is my vsftpd.conf: local_enable=YES write_enable=YES pam_service_name=vsftpd connect_from_port_20=YES listen=YES pam_service_name=vsftpd xferlog_std_format=NO log_ftp_protocol=YES chroot_local_user=YES Here is the output of vsftp.log: Mon Sep 13 23:34:44 2010 [pid 19243] CONNECT: Client "10.0.1.138" Mon Sep 13 23:34:44 2010 [pid 19243] FTP response: Client "10.0.1.138", "220 (vsFTPd 2.0.5)" Mon Sep 13 23:34:44 2010 [pid 19243] FTP command: Client "10.0.1.138", "USER dwelch" Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "331 Please specify the password." Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP command: Client "10.0.1.138", "PASS <password>" Mon Sep 13 23:34:44 2010 [pid 19242] [dwelch] FAIL LOGIN: Client "10.0.1.138" Mon Sep 13 23:34:45 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "530 Login incorrect." And the output of the secure log: Sep 13 17:40:50 intra vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=dwelch rhost=10.0.1.138 user=dwelch It looks like pam is not authenticating the user. Here is my /etc/pam.d/vsftp file: #%PAM-1.0 session optional pam_keyinit.so force revoke auth required pam_listfile.so item=user sense=deny file=/etc/vsftpd/ftpusers onerr=succeed auth required pam_shells.so auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so Can anyone see what I'm missing? Thanks.

  Read the article

• Amazon VPC NAT not working

  - by rpkelly

  I'm trying to create a NAT instance for my VPC to allow instances on private subnets connect to the internet (most importantly, S3). I tried following the instructions here: http://docs.amazonwebservices.com/AmazonVPC/2011-07-15/UserGuide/index.html?VPC_NAT_Instance.html . Unfortunately, the instances in the private subnet (call it 10.10.2.0/24) cannot reach the internet. I have done the following: Create a NAT instance (Amazon's ami-vpc-nat-1.0.0-beta.i386-ebs (ami-d8699bb1)) in public subnet (call it 10.10.1.0/24). Changed "Source / Dest Check" to disabled. Created a new entry in the default routing table (which is used by 10.10.2.0/24) and had it point to the ID of the newly created instance. Associated an Elastic IP address with the NAT instance. Allowed all outbound traffic on the security group of the NAT instance. Ensured that all traffic could pass between the two subnets. I've tried also doing this with an existing instance using iptables, but had no luck. And I have verified that sys.net.ipv4.ip_forward is 1, just in case anyone was wondering. And I still have no internet connectivity from the instances on 10.10.2.0/24. Does anyone have any suggestions?

  Read the article

• I/O Error on LG GSA-H12N DVD drive on Windows 7

  - by Ashwin

  I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

  Read the article

• How do I handle a request for "index.php/somepath" in Nginx config?

  - by Arne

  I'm currently attempting to serve Icinga from nginx. The new Icinga-Web ui attempts to load a file from URL http://SERVER/icinga-web/index.php/appkit/squishloader/javascript (leading to a 404). How do I setup a location for this scenario? How do I get nginx to serve index.php and pass the full request path in a way Icinga understands? This is my current nginx config for icinga (adapted from the default apache config): server { server_name SERVER; root /opt/icinga/icinga-1.2.1; location /icinga-web/js/ext3 { alias /opt/icinga/icinga-1.2.1/lib/ext3; } location /icinga-web { alias /opt/icinga/icinga-1.2.1/pub; } location /icinga/cgi-bin { alias /opt/icinga/icinga-1.2.1/sbin; } location /icinga { alias /opt/icinga/icinga-1.2.1/share; } location ~ \.php([\?/].*)?$ { include fastcgi_params; fastcgi_pass 127.0.0.1:61000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } Any thoughts? Thanks!

  Read the article

• Switching from prefork MPM to worker MPM + php-fpm on ubuntu

  - by Shane

  All tutorials I found were how to fresh install worker MPM + PHP-FPM, since my wordpress blog's already up and running with prefork MPM, correct me if I'm wrong in the simulated installation process: I'm on ubuntu and according to some tutorials, the following lines would do all the tricks: apt-get install apache2-mpm-worker libapache2-mod-fastcgi php5-fpm php5-gd a2enmod actions fastcgi alias Then you setup configuration in /etc/apache2/conf.d/php5-fpm.conf: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> After all these, restart: service apache2 restart && service php5-fpm restart Question: 1) Would it cause any down time in the whole process for previously running sites with prefork MPM? 2) Do you have to change any already existent configuration files like php or mysql or apache2(would they take effect immediately after the switch without you doing anything)? 3) I've already have apc up and running, do you have to re-install/re-configure it after the switch? 4) How do you find out if apache2 is working in worker MPM mode as expected? Thanks a lot!

  Read the article

• Bluehost Emails Getting Blocked

  - by colithium

  A site for my client has the run-of-the-mill "website with users" email pattern. Create an account, get an activation email. Get an email when a subscription is expiring, etc. The site is hosted on Bluehost and currently it uses php's mail() function. There isn't much configuration that is allowed (as far as I know). The trouble is, about a third of these emails disappear into the void. They aren't in spam or junk folders, there's no bounce message, they just cease to exist. I've read about Bluehost email troubles but I can't figure out what my options are for fixing it. These aren't marketing emails, ie they have user-specific information contained within them. I suppose if a solution offers a good templating system that would be fine. What are my options? Excerpt of headers when delivered to a Gmail address: Received-SPF: neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) client-ip=00.000.000.000; DomainKey-Status: good Authentication-Results: mx.google.com; spf=neutral (google.com: 00.000.000.000 is neither permitted nor denied by best guess record for domain of domain@box###.bluehost.com) smtp.mail=domain@box###.bluehost.com; domainkeys=pass [email protected]

  Read the article

• Apache ProxyPass with SSL

  - by BBonifield

  I have a QA setup that consists of multiple internal development servers and one world-accessible provisioning machine that is setup to proxy pass the web traffic. Everything works fine for non-SSL requests, but I'm having a hard time getting the SSL logic working as well. Here's a few example vhost blocks. <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev1.site.com </VirtualHost> <VirtualHost 192.168.168.101:443> ProxyPreserveHost On SSLProxyEngine On ProxyPass / https://192.168.168.111/ ServerName dev2.site.com </VirtualHost> <VirtualHost 192.168.168.101:80> ProxyPreserveHost On ProxyPass / http://192.168.168.111/ ServerName dev2.site.com </VirtualHost> I end up seeing the following error in the provisioner's error log. [Fri Jan 28 12:50:59 2011] [warn] [client 1.2.3.4] proxy: no HTTP 0.9 request (with no host line) on incoming request and preserve host set forcing hostname to be dev1.site.com for uri / As well as the following entry in the destination QA machine's access log. 192.168.168.101 - - [22/Feb/2011:08:34:56 -0600] "\x16\x03\x01 / HTTP/1.1" 301 326 "-" "-"

  Read the article

• How to manage mounted partitions (fstab + mount points) from puppet

  - by Cristian Ciupitu

  I want to manage the mounted partitions from puppet which includes both modifying /etc/fstab and creating the directories used as mount points. The mount resource type updates fstab just fine, but using file for creating the mount points is bit tricky. For example, by default the owner of the directory is root and if the root (/) of the mounted partition has another owner, puppet will try to change it and I don't want this. I know that I can set the owner of that directory, but why should I care what's on the mounted partition? All I want to do is mount it. Is there a way to make puppet not to care about the permissions of the directory used as the mount point? This is what I'm using right now: define extra_mount_point( $device, $location = "/mnt", $fstype = "xfs", $owner = "root", $group = "root", $mode = 0755, $seltype = "public_content_t" $options = "ro,relatime,nosuid,nodev,noexec", ) { file { "${location}/${name}": ensure => directory, owner => "${owner}", group => "${group}", mode => $mode, seltype => "${seltype}", } mount { "${location}/${name}": atboot => true, ensure => mounted, device => "${device}", fstype => "${fstype}", options => "${options}", dump => 0, pass => 2, require => File["${location}/${name}"], } } extra_mount_point { "sda3": device => "/dev/sda3", fstype => "xfs", owner => "ciupicri", group => "ciupicri", $options = "relatime,nosuid,nodev,noexec", } In case it matters, I'm using puppet-0.25.4-1.fc13.noarch.rpm and puppet-server-0.25.4-1.fc13.noarch.rpm.

  Read the article

• VPN from Windows XP to OpenSwan: correct setup?

  - by Gnudiff

  Main question is what I am doing wrong in my OpenSwan or L2TP client setup? I am trying to create a Linux OpenSwan VPN connection from Windows XP machine, using preshared key and the builtin Windows XP L2TP IPsec option. I have followed the instructions in Linux Home networking Wiki for setting up OpenSwan and a guide to making it work with the Windows XP client, but am now stuck. The net setup is as follows: [my windows client, private IP A]<->[f/wall B]<-internet->[g/w X]<->[Linux OpenSwan server Y] A - private subnet /24 B - internet address X - internet address /24 Y - internet address on same subnet as X What I essentially want is for computer with A address to feel and work, as if it was in X subnet for purposes of outgoing and incoming TCP and UDP connections. My OpenSwan setup is as follows: /etc/ipsec.conf (AAA and YYY indicates ip address parts of A and Y addresses): conn net-to-net authby=secret left=B leftsubnet=AAA.AAA.AAA.0/24 leftnexthop=%defaultroute right=Y rightsubnet=YYY.YYY.YYY.0/24 rightnexthop=B auto=start the secret in /etc/ipsec.secrets is listed as: B Y : PSK "0xMysecretkey" where B & Y stand for respective IP adresses of gateway B and linux server Y My L2TP WinXP setup is: IP of destination: Y don't prompt for username security options: typical, require secured pass, don't require data encryption, IPSec PSK set to 0xMysecretkey networking options: VPN Type: L2TP IPSec VPN; TCPIP protocol (with automatic IP address assignment) and QOS packet schedulers enabled The error I get from Windows client is 789: "error during initial negotiation"

  Read the article

• Deploying concrete5 on nginx

  - by Nithin

  I have a concrete5 site that works 'out of the box' in apache server. However I am having a lot of trouble running it in nginx. The following is the nginx configuration i am using: server { root /home/test/public; index index.php; access_log /home/test/logs/access.log; error_log /home/test/logs/error.log; location / { # First attempt to serve request as file, then # as directory, then fall back to index.html try_files $uri $uri/ index.php; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } # pass the PHP scripts to FastCGI server listening on unix socket # location ~ \.php($|/) { fastcgi_pass unix:/tmp/phpfpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_path_info; include fastcgi_params; } location ~ /\.ht { deny all; } } I am able to get the homepage but am having problem with the inner pages. The inner pages display an "Access denied". Possibly the rewrite is not working, in effect I think its querying and trying to execute php files directly instead of going through the concrete dispatcher. I am totally lost here. Thank you for your help, in advance.

  Read the article

• samba "username map" stopped to work after upgrade to 3.6

  - by Kris_R

  It was time to upgrade our group server (new HDs, problems with old installation of DRBD, etc..). Going as usually for CentOS i upgraded whole system from 6.3 to 6.4 The later one came with samba 3.6 as the old one was 3.5. I transferred most of users by copying /etc/password, /etc/shadow and samba accounts with pdbedit. Homes were on nfs-drive. The translation of unix accounts to samba accounts are located in /etc/samba/smbusers. Strangely enough on some windows clients there was problem to connect to samba-shares. In one case the only thing that worked was, instead of giving windows name, to use the unix account. In another one, it was possible to mount network drive and to open it in Windows Explorer, however other applications like "Total commander" at the attempt of opening this drive gave the message "Cannot connect to z:" (sometimes at this moment user/pass were requested). The smb.conf has following entries: [global] security = user passdb backend = tdbsam username map = /etc/samba/smbusers ... [Kris] comment = Kris's Private path = /SMB/Users/Kris writeable = yes read only = no browseable = yes users = krisr printable = no security mask = 0777 force security mode = 0 directory security mask = 0777 force directory security mode = 0 force create mode = 0775 force directory mode = 6775 The smbusers: # Unix_name = SMB_name1 SMB_name2 ... krisr = Kris Of course testparm runs without any errors. I was used from samba 3.5 to outputs of form Mapped user kris to krisr. Nothing like this happens now. Just message check_sam_security: Couldn't find user Kris in passdb. I read on web that some guys had problem with 3.6 and security = ADS, but these were not helpful for me. I'm seriously thinking about downgrading back to samba 3.5 but before this step I wanted to ask if somebody knows the solution of these problems.

  Read the article

• Asterisk terminating outbound call when picked up, sends 'BYE' message

  - by vo

  I'm running Asterisk 1.6.1.10 / FreePBX 2.5.2.2 and I've got an outbound trunk setup. Everything use to work fine until recently (perhaps due to upgrade to FC12 or other things I'm not sure). Anyway the setup does not appear to have issues registering and setting up the call, RTP packets go both ways and you can hear the ringing from the other side. However it appears that when the call is picked up or thereabouts, the incoming RTP packets cease. Upon closer inspection with Wireshark, there are these particular packets that seem to be the cause: trunk->asterisk SIP/SD Status: 200 OK, with session description asterisk->trunk SIP Request: ACK sip:<phone>@trunk:6889 asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 [..about a dozzen RTP packets in/outbound..] trunk->asterisk SIP Status: 200 OK, CSeq: 104 Bye [..outbound RTP continues, phone is silent..] Then the inbound RTP packets cease, however the asterisk logs dont show any activity at this point. The last entry reads 'SIP/ is answered SIP/'. Then when you hangup the extension, you get asterisk->trunk SIP Request: BYE sip:<phone>@trunk:6889 trunk->asterisk SIP Status: 481 Call Leg/Transaction does not exist My trunk peer settings in FreePBX are: username=<user> fromuser=<user> canreinvite=no type=friend secret=<pass> qualify=no [qualify yes produces 401/forbidden messages] nat=yes insecure=very host=<sip trunk gateway> fromdomain=<sip trunk gateway> disallow=all context=from-pstn allow=ulaw dtmfmode=inband Under sip_general_custom.conf i have stunaddr=stun.xten.com externrefresh=120 localnet=192.168.1.1/255.255.255.0 nat=yes Whats causing Asterisk to prematurely end the call and still think the call is in progress? I have no idea where to look next.

  Read the article

• Cannot resolve Hostname to IP, but IP to hostname works

  - by dotnetdev

  I have deployed a bunch of windows server VMs on a cloud hosting service. These machines are all joined to a domain controller on the same service, which also hosts DNS. All of the domain-joined machines have dynamic IP (along with the DC). If I try to resolve any of the hostnames remotely, it fails. For example, I am in SQL Server Reporting Services and I need to connect to a remote server. I provide the hostname of the desired target server and this fails, but then if I provide the IP, this works. How can I pass the hostname and have this resolve to IP? Is there anything I need to look for in the DNS server? It has records of the hostnames (in forward lookup I think), but reverse is empty. Isn't it the case that forward lookup resolves ip to hostname and reverse resolves hostname to ip? Also, I don't know what he subnet mask because this is not in my control, so the machines may not be in the same subnet - can this be a cause of the problem? Where is the problem? Thanks

  Read the article

• passing on command line options in bash

  - by bryan

  I have a question. I have a script, a kind of long script written in bash aprox. 370 lines. That has several functions and in those functions the user has to enter information which is then stored in files. ( This is suppose to represent a MySQL database, with the functions INSERT, UPDATE, SELECT, SELECT where x=y.) I created this myself in bash, now the only thing that rests me is that I need to be able to pass arguments on the command line to the script, that will do the same as the script does. I know that bash has positional parameters such as $1 $2 $3 $* $@ $0 ( refers to the name of the script) etc. I know how I can use these parameters in a simple if function. This is not enough for my script. I basicly need to do the same thing that the script does, but then from the command line. I have been struggling with this for a couple of days now and I cannot think of a way to get it to work. Maybe someone here can help me with this? If you want to have the script. That can be possible, but I don't think I can paste it in here... EDIT: Link to script, http://pastebin.com/Hd5VsDv2 Note, I am a beginner in bash scripting. EDIT: This is in reply to Answer 1. As I said I hope I can just replace the if [ "$1" = "one" ] ; then echo "found one" to if [ "$1" = "one" ] ; then echo SELECT where SELECT is the function I previously had in my script(above) http://pastebin.com/VFMkBL6g LINK to testing script

  Read the article

• 550 Requested action not taken: mailbox unavailable

  - by Porch

  I setup a small box with Server 2003 64bit to be used as a webserver and email server for a small school. Real simple stuff for a few users. A simple website and a handful of emails. rDNS and spf records setup and pass every test I found including test at dnsstuff.com. Email sending to almost every email address (google, hotmail, aol, whatever) works. However, with one domain, I get an bounce back with the error. 550 Requested action not taken: mailbox unavailable It's another school running Exchange judging from some packet sniffing with WireShark. Every email on this domain I have tried sending to gives this error. The email address is valid as I can send to it from my personal, and gmail account without a problem. Does anyone know of some anti-spam software that gives an 550 error like the above? What else could this be? Thanks for any suggestions. Packet capture of the two servers communicating look like this. 220 <server snip> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Sat, 2 Oct 2010 12:48:17 -0700 EHLO <email snip> 250-<server snip> Hello [<ip snip>] 250-TURN 250-SIZE 250-ETRN 250-XXXXXXXXXX 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-XXXXXXXX 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XXXXXXX 250 OK MAIL FROM: <email snip> 250 2.1.0 <email snip>....Sender OK RCPT TO:<email snip> 250 2.1.5 <email snip> DATA 354 Start mail input; end with <CRLF>.<CRLF> <email body here> . 550 Requested action not taken: mailbox unavailable QUIT 221 Goodbye

  Read the article

• Binding to LDAPS using PHP failing

  - by Sean

  We've finally set-up our server to accept ldap SSL connections thanks to another question answered by a helpful member. Our problem now is that when attempting to bind to ldap using the below simple PHP script, we constantly fail. Binding using ldap instead of ldaps works just fine using the script so I know the ldap is enabled. The catcher is that while using LDP.exe, we can successfully connect and bind to ldap on port 636 using a secure connection. The script we are failing with is below: <?php $ldap = ldap_connect("ldaps://localhost"); $username="user"; $password="pass"; if($bind = ldap_bind($ldap, $username,$password )) echo "logged in"; else echo "fail"; echo "<br/>done"; ?> We've also attempted inputting the username as "user@domain" or "domain/user" with no success. It seems I'm forever having LDAP/Cert questions. Our environment is Server 2008.

  Read the article

• Cannot access domain from windows 2003 client

  - by Peuge

  Hey all, First off I am a novice at AD and DNS so please bear with me. This is my current situation: I have one server which is a DC and DNS server (win2k3) - Machine 1. I have another machine which is trying to join this domain - Machine2. This machine is also a win2k3 server. This is what I have done so far: I have setup DNS on the DC and its tcp/ip dns is pointing to itself. On machine2 I have set its dns to point to the dc. The DNS has been setup with a forward lookup zone with the same name as the domain (accdirect.com). I can ping machine1 from the machine2 by its FQDN and ip. I have set up forwarders on the DC for our ISP dns and can browse the internet on both machines. In the DNS mmc on the DC I can see a host (A) has been created for machine2. The problem is I still cannot join the domain. When I try join the domain via my computer - properties then it brings up the username/password box and after I go "ok" it says cannot find domain accdirect.com If I run this from machine2 dcdiag /s:accdirect.com /u:accdirect.com\admin /p: then I get the following: Performing initial setup: ** Warning: could not confirm the identity of this server in the directory versus the names returned by DNS servers. If there are problems accessing this directory server then you may need to check that this server is correctly registered with DNS [accdirect.com] Directory Binding Error 1722: Win32 Error 1722 This may limit some of the tests that can be performed. Done gathering initial info. On the dc all dcdiag and netdiag results pass. If anyone could help me I would really appreciate this! Sorry if any of my terminology is a bit off, I have only been doing this for two days. thanks Peuge

  Read the article

• Cannot connect to FTP sites anymore

  - by Wayne M

  I have the FTP service running on Server 2003, and I am hosting websites through Apache. I have users configured to point to certain directories on the server. I am using FileZilla to remote FTP, but it never seems to connect to the directory. The command window says: Command: USER wayne Response: 331 Password required for wayne Command: PASS: ***** Response: 230 User wayne logged in Status: Connected Status: Retrieving directory isting... Command: PWD Response: 257 "/wayne" is current directory Command: TYPE I Response: 200 Type set to I. Command: PASV And that's it. It doesn't display any directories at all, and the pane says "Not connected to any server". Sometimes it will display the folder, but nothing happens when I click on it to expand it. It was working fine, and I have another FTP server set up the same way that does work. How can I fix this? EDIT: I've tried changing it to Active FTP, and it says: Command: LIST Command: 150 Opening BINARY mode data connection for /bin/ls Response: 425 Can't open data connection. Error: Failed to retrieve directory listing. I also noticed that I'm not able to browse the site in IIS's management console anymore, it just shows a blank screen when I click on one of the names and says There are no items to show in this view, although the name has permissions to view the folder and everything. Could it be because I have the Web Publishing service disabled (as I'm not using IIS to host websites)? That shouldn't cause anything should it?

  Read the article

• Filezilla client unable to get directory listing from Filezilla Server (Windows)

  - by sestocker

  I've set up a self signed certificate in FileZilla server and enabled FTP over SSL/TPS. When I connect from the client FileZilla, I am able to authenticate but cannot get a directory listing: Status: Connecting to MY_SERVER_IP:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.39 beta Response: 220-written by Tim Kosse ([email protected]) Response: 220 Please visit http://sourceforge.net/projects/filezilla/ Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER MYUSER Status: TLS/SSL connection established. Response: 331 Password required for MYUSER Command: PASS ******** Response: 230 Logged on Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PORT 10,10,25,85,219,172 Response: 200 Port command successful Command: MLSD Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection. Error: Failed to retrieve directory listing I have ports 21 and 50001 through 50005 open on the firewall. We are migrating servers - the 50001 - 50005 is one of the things that helped get FTPS working on the old server. I'm not sure this installation would use the same ports? What else could be the problem?

  Read the article

• Western Digitial My Book: Can't access the data on the drive

  - by Bryan Denny

  My girlfriend has this external hard drive by Western Digital called a My Book. When the external drive is connected, it does not show it as an accessible disk drive on the computer. However, it shows up fine in Device Manager: I can also see it in Disk Management, but the volume is not mapped to a drive letter, nor can I change the drive letter: It only gives me access to Delete Volume: I would rather not lose the data on the drive if possible. What can I do from here to get to the data? Things I've tried/know: Uninstall drivers and re-install them Device does the same thing when attach to either her Win7 laptop or my Win8 laptop I don't think there's an issue with the HDD itself. No clicking noises, etc. I ran Western Digital Data LifeGuard Diangostics (DLGDIAG) and the SMART Status was a "PASS", all of the SMART Disk Information looked fine. I haven't had the time to run the diag tests yet but I do not believe it's a mechanical issue. The hard drive is inside of an enclosure, I have not attempted to pry the drive out yet. How can I get Windows to properly detect this drive?

  Read the article

• Why won't this script accept any arguments?

  - by Nate Wagar

  I'm trying to write an SVN post-commit hook and, strangely, am getting hung up on what should be the easiest part. The Script: set REPO="$1" set REV="$2" set SVNBIN="/opt/CollabNet_Subversion/bin/" set SSHBIN="/usr/bin/ssh" set HOST="staging.domain.net" set timeout=30 set USERNAME="svn-usr" set E_NO_CONNECT=2 set E_WRONG_PASS=3 set E_UNKOWN=25 set CHANGED=`"$SVNBIN"svnlook changed --revision $REV $REPOS` echo "Here are changes: $CHANGED" >> /var/svn/repos/www/logs/testing echo "Command: $0; Repo: $REPO; Rev: $REV; Total: $#" >> /var/svn/repos/www/logs/testing set PROJECT "" Yet when I call it, it doesn't seem to be seeing the arguments I pass to it: /var/svn/repos/www/logs> sudo ../hooks/post-commit /var/svn/repos/www 33 svnlook: missing argument: --revision Type 'svnlook help' for usage. /var/svn/repos/www/logs> cat testing Here are changes: Command: ../hooks/post-commit; Repo: ; Rev: ; Total: 1 This is on a Solaris 10 SPARC box. I'm a bit of a script newbie, but shouldn't this be really easy??

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >