Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 308/802 | < Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >

• How to set up an inter-OS partition?

  - by Confuzzled Persun

  I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

  Read the article

• Help in decide the partition to install ubuntu

  - by G.Ashwin kumar

  I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

  Read the article

• Resize a pendrive Linux?

  - by user11239

  I'm running Ubuntu from USB media, which has a drive capacity of 250 GB, all existing as one FAT32 partition. However, when I created the bootable Ubuntu drive, only 4.79 GB were allocated for usage. Rather than put files directly into the /cdrom where the drive is mounted, I want to expand what is listed here in aufs to be at least 200 GB. I'm hopeful that I can do this live. Output of df : Filesystem 1K-blocks Used Available Use% Mounted on aufs 4051904 4050108 0 100% / none 1542852 284 1542568 1% /dev /dev/sdb1 244076800 4901648 239175152 3% /cdrom /dev/loop0 688000 688000 0 100% /rofs none 1547840 1496 1546344 1% /dev/shm tmpfs 1547840 4828 1543012 1% /tmp none 1547840 80 1547760 1% /var/run none 1547840 0 1547840 0% /var/lock none 1547840 0 1547840 0% /lib/init/rw Output of fdisk -l : Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00083fe4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 30401 244196001 c W95 FAT32 (LBA) So basically what I want to do is get /dev/sdb1 to be entirely, or almost entirely read as aufs. I'm confused over how to do this, as the file systems are all part of /dev/sdb1 on one big partition, rather than separate partitions for separate file systems.

  Read the article

• SMART says disk failure is imminent due to bad blocks, what do I need to do?

  - by flix

  I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

  Read the article

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• SSMS Tools Pack 2.5.3 is out with bug fixes and improved licensing

  - by Mladen Prajdic

  Licensing for SSMS Tools Pack 2.5 has been quite a hit and I received some awesome feedback. The version 2.5.3 contains a few bug fixes and desired licensing improvements. Changes include more licensing options, prices in Euros because of book keeping reasons (don't you just love those :)) and generally easier purchase and licensing process for users. Licensing now offers four options: Per machine license. (€25) Perfect if you do all your work from a single machine. Plus one OS reinstall activation. Personal license (€75) Up to 4 machine activations. Plus 2 OS reinstall activations and any number of virtual machine activations. Team license (€240) Up to 10 machine activations. Plus 4 OS reinstall activations and any number of virtual machine activations. Enterprise license (€350+) For more than 10 machine activations any number of virtual machine activations. 30 days license. Time based demo license bound to a machine. You can view all the details on the Licensing page . If you want to receive email notifications when new version of SSMS Tools Pack is out you can do that on the Main page or on the Download page . Version 2.7 is expected in the first half of February and won't support SSMS 2005 and 2005 Express anymore. Enjoy it!

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

• How to make and restore incremental snapshots of hard disk

  - by brunopereira81

  I use Virtual Box a lot for distro / applications testing purposes. One of the features I simply love about it is virtual machines snapshots, its saves a state of a virtual machine and is able to restore it to its former glory if something you did went wrong without any problems and without consuming your all hard disk space. On my live systems I know how to create a 1:1 image of the file system but all the solutions I'v known will create a new image of the complete file system. Are there any programs / file systems that are capable of taking a snapshot of a current file system, save it on another location but instead of making a complete new image it creates incremental backups? To easy describe what I want, it should be as dd images of a file system, but instead of only a full backup it would also create incremental. I am not looking for clonezilla, etc. It should run within the system itself with no (or almost none) intervention from the user, but contain all the data of the file systems. I am also not looking for a duplicity backup your all system excluding some folders script + dd to save your mbr. I can do that myself, looking for extra finesse. I'm looking for something I can do before doing massive changes to a system and then if something when wrong or I burned my hard disk after spilling coffee on it I can just boot from a liveCD and restore a working snapshot to a hard disk. It does not need to be daily, it doesn't even need a schedule. Just run once in a while and let it its job and preferably RAW based not file copy based.

  Read the article

• Best of OTN - Week of November 4th

  - by CassandraClark-OTN

  It was another exciting week at OTN!  Lots of GREAT content to share.  If you had a favorite that you don't see listed let us know in the comment section below.  Java Community - JavaOne Sessions Online - We've posted 60 of the JavaOne sessions online, and we'll be rolling out more sessions every few weeks. This content is free, courtesy of Oracle.NetBeans 7.4 Released  - NetBeans 7.4 features HTML5 integration for Java EE and PHP development; support for Apache Cordova and JDK 8 preview features; enhancements to Maven, C/C++, and more.vJUG: Worldwide Virtual JUG Created - London Java Community leader and technical evangelist Simon Maple has created a Meetup called vJUG, with aim toward connecting Java Developers in the virtual world.Tori Wieldt, Java Community Manager Friday Funny: This is what REALLY happens when you give someone your business card ow.ly/q6aKUArchitect Community - Don't forget to register for the free Virtual Developer Day - Harnessing the Power of Oracle WebLogic and Oracle Coherence.  December 3rd, 2013 - Two great tracks, Design & Develop and Build, Deploy & Manage.   Why wait, register now!  Multi-Factor Authentication in Oracle WebLogic - Shailesh K. Mishra - Really good technical article on using multi-factor authentication to protect web applications deployed on Oracle WebLogic.Coherence*Web: Sharing an httpSessions Among Applications in Different Oracle WebLogic Clusters - Jordi VillenaUnderstanding when and how to select session attributes that must be stored in the local storage of the Oracle WebLogic instances and which should be leveraged to an Oracle Coherence distributed cache.  Bob Rhubart, Architect Community Manager Friday Funny - "Be yourself, everyone else is already taken." Oscar Wilde (October 16, 1854 - November 30, 1900) Irish writer and poet.

  Read the article

• Augmenting functionality of subclasses without code duplication in C++

  - by Rob W

  I have to add common functionality to some classes that share the same superclass, preferably without bloating the superclass. The simplified inheritance chain looks like this: Element -> HTMLElement -> HTMLAnchorElement Element -> SVGElement -> SVGAlement The default doSomething() method on Element is no-op by default, but there are some subclasses that need an actual implementation that requires some extra overridden methods and instance members. I cannot put a full implementation of doSomething() in Element because 1) it is only relevant for some of the subclasses, 2) its implementation has a performance impact and 3) it depends on a method that could be overridden by a class in the inheritance chain between the superclass and a subclass, e.g. SVGElement in my example. Especially because of the third point, I wanted to solve the problem using a template class, as follows (it is a kind of decorator for classes): struct Element { virtual void doSomething() {} }; // T should be an instance of Element template<class T> struct AugmentedElement : public T { // doSomething is expensive and uses T virtual void doSomething() override {} // Used by doSomething virtual bool shouldDoSomething() = 0; }; class SVGElement : public Element { /* ... */ }; class SVGAElement : public AugmentedElement<SVGElement> { // some non-trivial check bool shouldDoSomething() { /* ... */ return true; } }; // Similarly for HTMLAElement and others I looked around (in the existing (huge) codebase and on the internet), but didn't find any similar code snippets, let alone an evaluation of the effectiveness and pitfalls of this approach. Is my design the right way to go, or is there a better way to add common functionality to some subclasses of a given superclass?

  Read the article

• Happy Day! VS2010 SP1, Project Server Integration, Load Test Feature Pack

  - by Aaron Kowall

  Microsoft released a PILE of Visual Studio goodness today: Visual Studio 2010 SP1(Including TFS SP1) Finally done with remembering which GDR packs, KB Patches, etc need to be installed with a new VS/TFS 2010 deployment.  Just grab the SP1.  It’s available today for MSDN Subscribers and March 10th for public download. TFS-Project Server Integration Feature Pack MSDN Subscribers got another little treat today with the TFS-Project Server integration feature pack.  We can now get project rollups and portfolio level management with Project Server yet still have the tight developer interaction with TFS.  Finally we can make the PMO happy without duplicate entry or MS Project gymnastics. Visual Studio Load Test Feature Pack This is a new benefit for Visual Studio 2010 Ultimate subscribers.  Previously there was a limit to Ultimate Load Testing of 250 virtual users. If you needed more, you had to buy virtual user license packs.  No more.  Now your Visual Studio Ultimate license allows you to simulate as many virtual users as you need!!  This is HUGE in improving adoption of regular load testing for development projects. All the Details are available from Soma’s blog. Technorati Tags: VS2010,TFS,Load Test

  Read the article

• How to document requirements for an API systematically?

  - by Heinrich

  I am currently working on a project, where I have to analyze the requirements of two given IT systems, that use cloud computing, for a Cloud API. In other words, I have to analyze what requirements these systems have for a Cloud API, such that they would be able to switch it, while being able to accomplish their current goals. Let me give you an example for some informal requirements of Project A: When starting virtual machines in the cloud through the API, it must be possible to specify the memory size, CPU type, operating system and a SSH key for the root user. It must be possible to monitor the inbound and outbound network traffic per hour per virtual machine. The API must support the assignment of public IPs to a virtual machine and the retrieval of the public IPs. ... In a later stage of the project I will analyze some Cloud Computing standards that standardize cloud APIs to find out where possible shortcomings in the current standards are. A finding could and will probably be, that a certain standard does not support monitoring resource usage and thus is not currently usable. I am currently trying to find a way to systematically write down and classify my requirements. I feel that the way I currently have them written down (like the three points above) is too informal. I have read in a couple of requirements enineering and software architecture books, but they all focus too much on details and implementation. I do really only care about the functionalities provided through the API/interface and I don't think UML diagrams etc. are the right choice for me. I think currently the requirements that I collected can be described as user stories, but is that already enough for a sophisticated requirements analysis? Probably I should go "one level deeper" ... Any advice/learning resources for me?

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• Dealing with three Windows partitions in dual boot installation

  - by Tim

  For dual-boot installation of Ubuntu after Windows. Quoted from ubuntuguide If a Windows boot partition exists as a second NTFS partition, it should be left alone. If there is a Windows recovery partition also installed, it can also be left alone as long as there are only two NTFS partitions total on the hard drive (i.e. there is no NTFS boot partition as well). If there are a total of 3 NTFS partitions on the hard drive, then the third Windows NTFS partition (the recovery partition) should be removed after creating Recovery CDs from it (see here). In the last case where Windows has three partitions, I was wondering why it says the recovery partition shall be removed? Is it possible to keep the three and create another extended partition with several logical partitions for installing Ubuntu and dual-booting the two OSes? I plan to dual-boot install Ubuntu 10.04 with existing Windows 7. Following is the layout of the current partitions of my hard drive viewed from Windows 7: So must I remove the Lenovo_Recovery (Q:) partition for the same reason you give for the first question? Thanks and regards!

  Read the article

• Exalogic Elastic Cloud Software (EECS) version 2.0.1 available

  - by JuergenKress

  We are pleased to announce that as of today (May 14, 2012) the Exalogic Elastic Cloud Software (EECS) version 2.0.1 has been made Generally Available. This release is the culmination of over two and a half years of engineering effort from an extended team spanning 18 product development organizations on three continents, and is the most powerful, sophisticated and comprehensive Exalogic Elastic Cloud Software release to date. With this new EECS release, Exalogic customers now have an ideal platform for not only high-performance and mission critical applications, but for standardization and consolidation of virtually all Oracle Fusion Middleware, Fusion Applications, Application Unlimited and Oracle GBU Applications. With the release of EECS 2.0.1, Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageability and extreme performance in a fully virtualized environment. The Exalogic Elastic Cloud Software 2.0.1 release brings important new technologies to the Exalogic platform: Exalogic is now capable of hosting multiple concurrent tenants, business applications and middleware deployments with fine-grained resource management, enterprise-grade security, unmatched manageabi! lity and extreme performance in a fully virtualized environment. Support for extremely high-performance x86 server virtualization via a highly optimized version of Oracle VM 3.x. A rich, fully integrated Infrastructure-as-a-Service management system called Exalogic Control which provides graphical, command line and Java interfaces that allows Cloud Users, or external systems, to create and manage users, virtual servers, virtual storage and virtual network resources. Webcast Series: Rethink Your Business Application Deployment Strategy Redefining the CRM and E-Commerce Experience with Oracle Exalogic, 7-Jun@10am PT & On-Demand: ‘The Road to a Cloud-Enabled, Infinitely Elastic Application Infrastructure’ (featuring Gartner Analysts). WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: ExaLogic Elastic Cloud,ExaLogic,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress,ExaLogic 2.0.1

  Read the article

• How do you setup Postfix/Dovecot/MySQL to not look for local accounts?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• How can I refresh/reinstall/clear/set-to-default my bootup process?

  - by Tchalvak

  I'm currently having a problem with my bootup process that is growing progressively worse as time goes on: While booting, it does a few minutes of hard-drive reading. During that, instead of showing a boot splash screen, it shows various dashes and dots, as if the video card isn't recognizing. The splash screen actually has colors similar to the splash screen (purple), it simply is garbled. It then does a few minutes of hard-drive reads, and if I leave it long enough, sometimes it boots into the desktop (and auto-logs-in). Sometimes, unfortunately, it just hangs on that garbled screen and reads from the hard-drive forever. Notably, I've also stopped being able to access grub during bootup (perhaps it is just not displayed correctly by the video, hard to tell). This is a symptom that has grown over the course of various ubuntu upgrades, at least I suspect that the upgrade process is leaving behind cruft. So, is there a safe way for me to "refresh" the boot system so that it is clean, new, fast, and reliable? For example, to test out a cleanly configured boot, make sure that it works (try before I buy), and then apply it to the system to eliminate as much of this problem as possible? Edit: Here is the requested bootchart: http://imgur.com/9jocF

  Read the article

• Problem with APTonCD application

  - by Harikrishnan

  I created a iso image using aptoncd & burned it to a dvd. now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows "E: Failed to mount the cdrom.". The dvd is in the drive itself. I tried "sudo lshw -C disk" and the out put is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as "/dvd/sr0". my ubuntu version is 10.10. please help me to solve the problem.

  Read the article

• Copy to USB memory stick really slow?

  - by Eloff

  When I copy files to the USB device, it takes much longer than in windows (same usb device, same port) it's faster than USB 1.0 speeds (1MB/s) but much slower than USB 2.0 speeds (12MB/s). To copy 1.8GB takes me over 10 minutes (it should be < 3 min.) I have two identical SanDisk Cruzer 8GB sticks, and I have the same problem with both. I have a super talent 32GB USB SSD in the neighboring port and it works at expected speeds. The problem I seem to see in the GUI is that the progress bar goes to 90% almost instantly, completes to 100% a little slower and then hangs there for 10 minutes. Interrupting the copy at this point seems to result in corruption at the tail end of the file. If I wait for it to complete the copy is successful. Any ideas? dmesg output below: [64059.432309] usb 2-1.2: new high-speed USB device number 5 using ehci_hcd [64059.526419] scsi8 : usb-storage 2-1.2:1.0 [64060.529071] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.14 PQ: 0 ANSI: 2 [64060.530834] sd 8:0:0:0: Attached scsi generic sg4 type 0 [64060.531925] sd 8:0:0:0: [sdd] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [64060.533419] sd 8:0:0:0: [sdd] Write Protect is off [64060.533428] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00 [64060.534319] sd 8:0:0:0: [sdd] No Caching mode page present [64060.534327] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.537988] sd 8:0:0:0: [sdd] No Caching mode page present [64060.537995] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.541290] sdd: sdd1 [64060.544617] sd 8:0:0:0: [sdd] No Caching mode page present [64060.544619] sd 8:0:0:0: [sdd] Assuming drive cache: write through [64060.544621] sd 8:0:0:0: [sdd] Attached SCSI removable disk

  Read the article

• C++: calling non-member functions with the same syntax of member ones

  - by peoro

  One thing I'd like to do in C++ is to call non-member functions with the same syntax you call member functions: class A { }; void f( A & this ) { /* ... */ } // ... A a; a.f(); // this is the same as f(a); Of course this could only work as long as f is not virtual (since it cannot appear in A's virtual table. f doesn't need to access A's non-public members. f doesn't conflict with a function declared in A (A::f). I'd like such a syntax because in my opinion it would be quite comfortable and would push good habits: calling str.strip() on a std::string (where strip is a function defined by the user) would sound a lot better than calling strip( str );. most of the times (always?) classes provide some member functions which don't require to be member (ie: are not virtual and don't use non-public members). This breaks encapsulation, but is the most practical thing to do (due to point 1). My question here is: what do you think of such feature? Do you think it would be something nice, or something that would introduce more issues than the ones it aims to solve? Could it make sense to propose such a feature to the next standard (the one after C++0x)? Of course this is just a brief description of this idea; it is not complete; we'd probably need to explicitly mark a function with a special keyword to let it work like this and many other stuff.

  Read the article

• X won't start, root filesystem mounted read only

  - by TK Kocheran

  I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

  Read the article

• How do I drag my widgets without dragging other widgets?

  - by Cypher

  I have a bunch of drag-able widgets on screen. When I am dragging one of the widgets around, if I drag the mouse over another widget, that widget then gets "snagged" and is also dragged around. While this is kind of a neat thing and I can think of a few game ideas based on that alone, that was not intended. :-P Background Info I have a Widget class that is the basis for my user interface controls. It has a bunch of properties that define it's size, position, image information, etc. It also defines some events, OnMouseOver, OnMouseOut, OnMouseClick, etc. All of the event handler functions are virtual, so that child objects can override them and make use of their implementation without duplicating code. Widgets are not aware of each other. They cannot tell each other, "Hey, I'm dragging so bugger off!" Source Code Here's where the widget gets updated (every frame): public virtual void Update( MouseComponent mouse, KeyboardComponent keyboard ) { // update position if the widget is being dragged if ( this.IsDragging ) { this.Left -= (int)( mouse.LastPosition.X - mouse.Position.X ); this.Top -= (int)( mouse.LastPosition.Y - mouse.Position.Y ); } ... // define and throw other events if ( !this.WasMouseOver && this.IsMouseOver && mouse.IsButtonDown( MouseButton.Left ) ) { this.IsMouseDown = true; this.MouseDown( mouse, new EventArgs() ); } ... // define and throw other events } And here's the OnMouseDown event where the IsDraggable property gets set: public virtual void OnMouseDown( object sender, EventArgs args ) { if ( this.IsDraggable ) { this.IsDragging = true; } } Problem Looking at the source code, it's obvious why this is happening. The OnMouseDown event gets fired whenever the mouse is hovered over the Widget and when the left mouse button is "down" (but not necessarily in that order!). That means that even if I hold the mouse down somewhere else on screen, and simply move it over anything that IsDraggable, it will "hook" onto the mouse and go for a ride. So, now that it's obvious that I'm Doing It Wrong™, how do I do this correctly?

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• Modular Architecture for Processing Pipeline

  - by anjruu

  I am trying to design the architecture of a system that I will be implementing in C++, and I was wondering if people could think of a good approach, or critique the approach that I have designed so far. First of all, the general problem is an image processing pipeline. It contains several stages, and the goal is to design a highly modular solution, so that any of the stages can be easily swapped out and replaced with a piece of custom code (so that the user can have a speed increase if s/he knows that a certain stage is constrained in a certain way in his or her problem). The current thinking is something like this: struct output; /*Contains the output values from the pipeline.*/ class input_routines{ public: virtual foo stage1(...){...} virtual bar stage2(...){...} virtual qux stage3(...){...} ... } output pipeline(input_routines stages); This would allow people to subclass input_routines and override whichever stage they wanted. That said, I've worked in systems like this before, and I find the subclassing and the default stuff tends to get messy, and can be difficult to use, so I'm not giddy about writing one myself. I was also thinking about a more STLish approach, where the different stages (there are 6 or 7) would be defaulted template parameters. Can anyone offer a critique of the pattern above, thoughts on the template approach, or any other architecture that comes to mind?

  Read the article

< Previous Page | 304 305 306 307 308 309 310 311 312 313 314 315  | Next Page >