Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 309/609 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• ISPConfig Creating CNAME and A for web domain

  - by Asghar

  I have ISpConfig 3. I have an ip address "xxx.xxx.xxx.xxx". I want to configure this to point to http://www.my.mydomain.com I have created DNS record and configured "xxx.xxx.xxx.xxx". and domain name my.mydomain.com Problem is that my.mydomain.com is accessible through only my.mydomain.com or through http://my.mydomain.com only. i want that it should also be accessible through www.my.mydomain.com Someone told me that i should have to create CNAME and A record for this domain. i have following Zone Record Configurations but this is not working. Please help me what i am doing wrong and what exactly should be CNAME and A configuration to work it with www.my.mydomain.com

  Read the article

• Testing radius server from Mac OS X client

  - by Calvin Froedge

  I have a radius server set up on a server running Ubuntu 11.04. I have configured my switch to use the authentication server's IP (192.168.1.2) for RADIUS / 802.1x authentication, and I created a connection to test connecting from my Mac OSX client. Here is my radius configuration for the client: client 192.168.1.0/16 { secret = testing123 } I can successfully authenticate using both 127.0.0.1 (localhost) and 192.168.1.2 (ip of eth1), so I know radius is getting those requests. I set up a connection to test from my macbook, and my requests are timing out. http://screencast.com/t/tMhRLS3H7 Is there a better way to test the radius connection from my macbook? Thanks! UPDATE: I was able to successfully test on Mac OSX client using RadPerf. This is available as a cross-platform command line tool.

  Read the article

• Troubleshooting Windows Authentication problems (no challenge) in IIS 7.5?

  - by Aaronaught

  I know that there are thousands of reports of people having trouble getting Integrated Windows Authentication to work with IIS, but they all seem to lead to web pages that don't apply or solutions that I've already tried. I've deployed dozens of sites like this before, so either there's something bizarre going on with the server/configuration, or I've been looking at this too long and not seeing the obvious. Simply put, everything works perfectly on my local machine, but falls apart on the production server, which as far as I can tell has the exact same configuration. On the local machine: The machine is running Windows 7 Ultimate, Service Pack 1, IIS 7.5. The site has been tested successfully, using both IIS and the VS Web Development Server. The IIS site config has all authentication methods disabled except Windows Authentication. The local machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. All browsers tested (IE, Firefox, Chrome) show the challenge prompt and allow me to log in to the localhost domain with my (local) Windows account. All browsers tested also work using an opaque local IP address - so the browsers themselves don't seem to care whether the site appears "local" or "remote". I've added a display line to the web page which shows the currently-logged-in user and it shows exactly what I would expect (whichever local user I logged in with). On the remote machine: The server is running Windows Server 2008 R2, IIS 7.5. Loading the web page results in an immediate 401.2 error: You are not authorized to view this page due to invalid authentication headers. No challenge prompt ever appears. The IIS site config has all authentication methods disabled except Windows Authentication. The remote machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. On the remote machine (remote desktop session), the same error appears in Internet Explorer regardless of whether the domain is localhost or the external IP address. If I try to view the remote web site from my local machine, the error is still 401, but a slightly different 401. No subcode, with the text: Access is denied due to invalid credentials. The Windows Authentication IIS role feature is installed. The WindowsAuthentication Module is added (at the Server level). The exact same error occurs if I turn off Windows Authentication and enable Basic Authentication. The site does load if I turn off Windows Authentication and enable Anonymous (obviously). I've already followed all of the troubleshooting steps on Microsoft Support: Troubleshooting HTTP 401 errors in IIS I've already tried the workaround shown on another Microsoft support page (supposedly to force NTLM as the only method). Last but not least, I tried turning on FREB for 401.2 errors and the results don't seem to tell me anything useful, all I see is the following warning: MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ...this seems to just be telling me what I already know (that it's simply rejecting the request instead of negotiating the credentials). The trace does indicate that the WindowsAuthentication module is correctly loaded because there is a NOTIFY_MODULE_START line with ModuleName = WindowsAuthentication (and various other ASP.NET follow-up events - [un]fortunately, no interesting errors or warnings here). Can anyone tell me what I might be missing here? Quick Update: I'm a little uncomfortable sending a whole Wireshark dump as it would reveal IPs, URLs and other stuff, but I did a side-by-side comparison of the HTTP responses from localhost and the remote server in Fiddler, and it seems fairly self-evident what the problem is: Localhost: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:42:34 GMT Content-Length: 6399 Proxy-Support: Session-Based-Authentication Remote: HTTP/1.1 401 Unauthorized Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:43:13 GMT Content-Length: 1293 Aside from a few seemingly-inconsequential differences like cache-control, the main difference is that the remote server is not sending the WWW-Authenticate headers back to the client. So, I guess that narrows the question down to: Why is IIS not sending WWW-Authenticate headers when Windows Authentication appears to be installed, loaded, and exclusively enabled?

  Read the article

• How to cache dynamic javascript/jquery/ajax/json content with Akamai

  - by Starfs

  Trying to wrap my head around how things are cached on a CDN and it is new territory for me. In the document we received about sending in environment requests, it says "Dynamically-generated content will not benefit much from EdgeSuite". I feel like this is a simplified statement and there has to be a way to make it so you cache dynamically generated content if the tools are configured correctly. The site we are working with runs off a wordpress database, and uses javascript and ajax to build the pages, based on the json objects that php scripts have generated. The process - user's browser this URL, browser talks to edgesuite tools which will have cached certain pre-defined elements, and then requests from the host web server anything that is not cached, once edgesuite has compiled a combination of the two, it sends that information back to the browser. Can we not simply cache all json objects (and of course images, js, css) and therefore the web browser never has to hit the host server's database, at which point in essence, we have cached our dynamic content? Does anyone have any pointers on the most efficient configuration for this type of system -- Akamai/CDN -- to served javascript/ajax/json generated pages that ideally already hit pre-cached json data? Any and all feedback is welcome!

  Read the article

• Windows 7: how to let AutoConfigURL change be effective immediately?

  - by Jeroen Pluimers

  I want to set both the script and the "Use automatic configuration script" checkbox in Windows 7 using a script that immediately affects anything using wininet.dll (Internet Explorer, Chrome, .NET apps, etc). I've done a before/after registry diff, and tried doing this through the registry, but things like the reg files below require the apps to be restarted. Chaning the settings by pressing the "LAN Settings" button through this Control panel shortcut has immediate affect: %windir%\system32\control.exe Inetcpl.cpl,,4 How can I script this immediate effect? These are the registry script files: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=”http://www.company.com/proxy.pac” (registry scripts borrowed from http://danny.quantumspark.net/wordpress/) [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings] “AutoConfigURL”=- --jeroen (who is checking out the notify function at superuser.com)

  Read the article

• Why am I getting warnings about missing DLLs when adding a node to a WSFC?

  - by Stuart Branham

  We're getting the following two errors when adding a node to our WSFC. The node was added successfully, but the 'SQL Server Availability Group' resource type could not be installed on it. Unable to find 'hadrres.dll' on any of the cluster nodes. The node was added successfully, but the 'SQL Server FILESTREAM Share' resource type could not be installed on it. Unable to find 'fssres.dll' on any of the cluster nodes. This cluster is going to host an AlwaysOn Availability Group. SQL Server 2012 is installed on both nodes, and availability groups are enabled on both. Filestream access is also configured on both. Another curious thing I'm seeing is that my instance on the second node doesn't appear in Configuration Manager. Anyone know what may be going on here?

  Read the article

• AskUbuntu Add-on for Firefox, Opera and Chrome

  - by lovinglinux

  Screenshots Firefox Opera Chrome About The extension, called AskUbuntu Add-on, allows to easily track user info and questions from askubuntu.com. This extension displays user reputation and badges in the toolbar, provides an easy access menu to unanswered questions , user questions, favorites and user tags. It has an update checker that alerts when there is new activity in the user account or unanswered questions. The configuration options allow to disable alerts, limit the number of items displayed in the menu, hide user info and control the frequency of updates. There is also an option to store data temporarily if the browser is on private mode. License Free, open source released under: GNU General Public License v3 [Firefox] Apache License, Version 2.0 [Opera and Chrome] Download Home page: http://www.webgapps.org/addons/askubuntu GitHub downloads: http://github.com/webgapps/askubuntu/downloads Mozilla gallery: https://addons.mozilla.org/en-US/firefox/addon/242568/ Opera gallery: https://addons.opera.com/addons/extensions/details/askubuntu-add-on... Google gallery: https://chrome.google.com/extensions/detail/hamgohmiimamjpabgncmklojoibjknon Platform Firefox 3.5 to 4.0b8pre Opera 11.0 Chrome 5.0.316.0 [OS independent] Contact Developed by lovinglinux Code Javascript, HTML (Opera and Chrome) and XUL (Firefox) Source code at http://github.com/webgapps/askubuntu Note: some Gnome users might experience diminished functionality if their Firefox does not show icons in menus, since the icons are indicators of new activity. To solve this problem visit: http://askubuntu.com/questions/8586/where-is-the-gnome-option-to-display-icons-in-menus

  Read the article

• How to remove Analog and Webalizer from my WHM?

  - by GaVrA

  Hello! Really simple question, we had some issues analog, and decided to turn it off since noone is using it. Now, in "Statistics Software Configuration" page in WHM we have disabled all statistics software, but we want to completely remove every trace of analog and webalizer. We have logs for about 2 years in them, but, like i said, we never used them(using google analytics) so why leaving something that have a lot of data if we are not gonna use it... So how to remove analog and webalizer from whm and how to prune every data they generated? Thanks!

  Read the article

• How to install and use Tally ERP 9 in Wine

  - by askmish

  I am trying to run Tally ERP 9 (http://www.tallysolutions.com/), post-installation in wine 1.7. I am getting an "out of memory" error, the moment it starts(at the tally splash screen). I then have no option other than to close it. OS: Xubuntu 12.04.3 Wine: 1.6\1.7.9 How have I installed: Inserted the Tally Installation CD, clicked on the tally installer executable. Installed by following the setup. Configured for multi-user, client configuration. Server is at a specified LAN address running on Windows. Then once installation is done. Clicked on the executable/ran from command line for tally.exe Please guide.

  Read the article

• hp ProLiant DL380 G6 server error code: 347 of array controller

  - by alhaythum

  I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

  Read the article

• How to make iPhone Cisco VPN client work with ASA with certificate authentication

  - by Ben Jencks

  I have an ASA that's providing IPsec VPN services using certificate authentication (no xauth, just the certs). It works perfectly with the Cisco IPsec VPN Client. Now I'm trying to let iPhones connect. I've installed the CA cert and a client certificate on the iPhone with a profile using iPCU, along with the VPN configuration. Then connecting gives the error "Could not validate the server certificate". Additionally, the ASA logs the error "Received encrypted Oakley Informational packet with invalid payloads". FWIW, I receive the same invalid payload error when trying to use the Snow Leopard IPsec client to connect. Has anyone successfully gotten the iPhone IPsec client to work with certificate auth?

  Read the article

• How to use BCDEdit to dual boot Windows installations?

  - by Ian Boyd

  What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

  Read the article

• Visual Studio 2013 Static Code Analysis in depth: What? When and How?

  - by Hosam Kamel

  In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

  Read the article

• Messed up installation of mysql-server - cannot complete installation or deinstallation

  - by Christian Engel

  apt-get got stuck while installing mysql-server. I don't know why but it just stopped working and never continued. I had to reboot the machine in the middle of the setup process. Now, if I try to install or purge the mysql-server package, apt-get tries to configure mysql-server first (tells me its not installed before that) and cancels with a error message: Sub-process /usr/bin/dpkg returned an error code(1) apt-get also tells me that two packages have not been successfully installed or removed. this is the complete console output: christian@devbox:~$ sudo apt-get install mysql-server [sudo] password for christian: Reading package lists... Done Building dependency tree Reading state information... Done mysql-server is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up mysql-server-5.5 (5.5.32-0ubuntu7) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) christian@devbox:~$

  Read the article

• xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context

  - by mmc18

  When I executed xl2tpd I amhaving following error. # xl2tpd -D xl2tpd[845]: parse_config: line 13: data 'ipsec sared=yes' occurs with no context xl2tpd[845]: init: Unable to load config file When I remove the "line 13" I having same error with "Line 14" thefore I do not think that the problem is about "ipsec sared" Here is my configuration file xl2tpd.conf. LINUX Ubuntu 12.0.4 ;Openswan IPsec 2.6.37; xl2tpd version: xl2tpd-1.3.1 ; [global] ipsec sared=yes listen-addr=47.168.137.27 ; [lns default] ip range = 192.168.1.10-192.168.1.20 local ip = 192.168.1.1 require chap = yes refuse pap = yes require authentication = yes ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes name=LinuxIPSECVPN ANSWER:(since have not enough reputation I am writting it over here.) removing the ";" character at the beginning of [global] and [lns default] have solved the issue. At fist I tought that [global] and[lns default] were just a comment.

  Read the article

• HP Network Utility Error

  - by William Ricci

  Using the HP Network Utility to team 2 ports on Windows 2008 R2 Standard results in this error:----- An error occurred when making a call into the operating system. Happens on either of two cards that are installed. This happened before and after upgrading to PSP 9.10. Uninstalled the HP Network Configuration Utility and re-installed version 10.65.0.6. Updated NIC drivers. NC382i DP - HP Broadcom 1Gb Multifunction Driver 7.4.23.0 (from 6.2.9.0) NC365T - Intel E1R 11.14.80.0 (from 11.14.49.0)

  Read the article

• CodePlex Daily Summary for Tuesday, March 09, 2010

  CodePlex Daily Summary for Tuesday, March 09, 2010New Projects.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: .NET Excel Wrapper encapsulates the complexity of working with multiple Excel objects giving you one central point to do all your processing. It h...Advancement Voyage: Advancement Voyage is a high quality RPG experience that provides all the advancement and voyaging that a player could hope for.ASP.Net Routing configuration: ASP.NET routing configuration enables you to configure the routes in the web.config bbinjest: bbinjestBuildUp: BuildUp is a build number increment tool for C# .net projects. It is run as a post build step in Visual Studio.Controlled Vocabulary: This project is devoted to creating tools to assist with Controlling Vocabulary in communication. The initial delivery is an Outlook 2010 Add-in w...CycleList: A replacement for the WPF ListBox Control. Displays only a single item and allows the user to change the selected item by clicking on it once. Very...Forensic Suite: A suite of security softwareFREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat is a live chat solution and its DotNetNuke Chat Module helps to embed a live chat room into website with DotNetNuke(DNN) integrated ...HouseFly experimental controls: Experimental controls for use in HouseFly.ICatalogAll: junkMidiStylus: MidiStylus allows you to control MIDI-enabled hardware or software using your pressure-sensitive pen tablet. The program maps the X position, Y po...myTunes: Search for your favorite artistsNColony - Pluggable Socialism?: NColony will maximize the use of MEF to create flexible application architectures through a suite of plug-in solutions. If MEF is an outlet for plu...Network Monitor Decryption Expert: NmDecrypt is a Network Monitor Expert which when given a trace with encrypted frames, a security certificate, and a passkey will create a new trace...occulo: occulo is a free steganography program, meant to embed files within images with optional encrytion. Open Ant: A implementation of a Open Source Ant which is created to show what is possible in the serious game AntMe! The First implementation of that ProjectProgramming Patterns by example: Design patterns provide solutions to common software design problems. This project will contain samples, written in c# and ruby, of each design pat...project4k: Developing bulk mail system storing email informationQuail - Selenium Remote Control Made Easy: Quail makes it easy for Quality Assurance departments write automated tests against web applications. Both HTML and Silverlight applications can b...RedBulb for XNA Framework: RedBulb is a collection of utility functions and classes that make writing games with XNA a lot easier. Key features: Console,GUI (Labels, Buttons,...RegExpress: RegExpress is a WPF application that combines interactive demos of regular expressions with slide content. This was designed for a user group prese...RemoveFolder: Small utility program to remove empty foldersScrumTFS: ScrumTFSSharePoint - Open internal link in new window list definition: A simple SharePoint list definition to render SharePoint internal links with the option to open them in a new window.SqlSiteMap4MVC: SqlSiteMapProvider for ASP.Net MVC.T Sina .NET Client: t.sina.com.cn api 新浪微博APITest-Lint-Extensions: Test Lint is a free Typemock VS 2010 Extension that finds common problems in your unit tests as you type them. this project will host extensions ...ThinkGearNET: ThinkGearNET is a library for easy usage of the Neurosky Mindset headset from .NET .Wiki to Maml: This project enables you to write wiki syntax and have it converted into MAML syntax for Sandcastle documentation projects.WPF Undo/Redo Framework: This project attempts to solve the age-old programmer problem of supporting unlimited undo/redo in an application, in an easily reusable manner. Th...WPFValidators: WPF Validators Validações de campos para WPFWSP Listener: The WSP listener is a windows service application which waits for new WSC and WSP files in a specific folder. If a new WSC and WSP file are added, ...New Releases.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: First Release: This is the first release which includes the main library release..NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: Updated Version: New Features:SetRangeValue using multidimensional array Print current worksheet Print all worksheets Format ranges background, color, alig...ArkSwitch: ArkSwitch v1.1.2: This release removes all memory reporting information, and is focused on stability.BattLineSvc: V2.1: - Fixed a bug where on system start-up, it would pop up a notification box to let you know the service started. Annoying! And fixed! - Fixed the ...BuildUp: BuildUp 1.0 Alpha 1: Use at your own risk!Not yet feature complete. Basic build incrementing and attribute overriding works. Still working on cascading build incremen...Controlled Vocabulary: 1.0.0.1: Initial Alpha Release. System Requirements Outlook 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running i...CycleList: CycleList: The binaries contain the .NET 3.5 DLL ONLY. Please download source for usage examples.FluentNHibernate.Search: 0.3 Beta: 0.3 Beta take the following changes : Mappings : - Field Mapping without specifying "Name" - Id Mapping without specifiying "Field" - Builtin Anal...FREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat DNN Chat Module: With FREE DotNetNuke Chat Module of 123 Flash Chat, webmaster will be assist to add a chat room into DotNetNuke instantly and help to attract more ...GameStore League Manager: League Manager 1.0 release 3: This release includes a full installer so that you can get your league running faster and generate interest quicker.iExporter - iTunes playlist exporting: iExporter gui v2.3.1.0 - console v1.2.1.0: Paypal donate! Solved a big bug for iExporter ( Gui & Console ) When a track isn't located under the main iTunes library, iExporter would crash! ...jQuery.cssLess: jQuery.cssLess 0.3: New - Removed the dependency from XRegExp - Added comment support (both CSS style and C style) - Optimised it for speed - Added speed test TOD...jQuery.cssLess: jQuery.cssLess 0.4: NEW - @import directive - preserving of comments in the resulting CSS - code refactoring - more class oriented approach TODO - implement operation...MapWindow GIS: MapWindow 6.0 msi (March 8): Rewrote the shapefile saving code in the indexed case so that it uses the shape indices rather than trying to create features. This should allow s...MidiStylus: MidiStylus 0.5.1: MidiStylus Beta 0.5.1 This release contains basic functionality for transmitting MIDI data based on X position, Y position, and pressure value rea...MiniTwitter: 1.09.1: MiniTwitter 1.09.1 更新内容 修正 URL に & が含まれている時に短縮 URL がおかしくなるバグを修正Mosaictor: first executable: .exe file of the app in its current state. Mind you that this will likely be highly unstable due to heaps of uncaught errors.MvcContrib a Codeplex Foundation project: T4MVC: T4MVC is a T4 template that generates strongly typed helpers for ASP.NET MVC. You can download it below, and check out the documention here.N2 CMS: 2.0 beta: Major Changes ASP.NET MVC 2 templates Refreshed management UI LINQ support Performance improvements Auto image resize Upgrade Make a comp...NotesForGallery: ASP.NET AJAX Photo Gallery Control: NotesForGallery 2.0: PresentationNotesForGallery is an open source control on top of the Microsoft ASP.NET AJAX framework for easy displaying image galleries in the as...occulo: occulo 0.1 binaries: Windows binaries. Tested on Windows XP SP2.occulo: occulo 0.1 source: Initial source release.Open NFe: DANFE 1.9.5: Ajuste de layout e correção dos campos de ISS.patterns & practices Web Client Developer Guidance: Web Application Guidance -- March 8th Drop: This iteration we focused on documentation and bug fixes.PoshConsole: PoshConsole 2.0 Beta: With this release, I am refocusing PoshConsole... It will be a PowerShell 2 host, without support for PowerShell 1.0 I have used some of the new P...Quick Performance Monitor: QPerfmon 1.1: Now you can specify different updating frequencies.RedBulb for XNA Framework: Cipher Puzzle (Sample) Creators Club Package: RedBulb Sample Game: Cipher Puzzle http://bayimg.com/image/galgfaacb.jpgRedBulb for XNA Framework: RedBulbStarter (Base Code): This is the code you need to start with. Quick Start Guide: Download the latest version of RedBulb: http://redbulb.codeplex.com/releases/view/415...RoTwee: RoTwee 7.0.0.0 (Alpha): Now this version is under improvement of code structure and may be buggy. However movement of rotation is quite good in this version thanks to clea...SCSI Interface for Multimedia and Block Devices: Release 9 - Improvements and Bug Fixes: Changes I have made in this version: Fixed INQUIRY command timeout problem Lowered ISOBurn's memory usage significantly by not explicitly setting...SharePoint - Open internal link in new window list definition: Open link in new window list definition: First release, with english and italian localization supportSharePoint Outlook Connector: Version 1.2.3.2: Few bug fixing and some ui enhancementsSysI: sysi, release build: Better than ever -- now allows for escalation to adminThe Silverlight Hyper Video Player [http://slhvp.com]: Beta 1: Beta (1.1) The code is ready for intensive testing. I will update the code at least every second day until we are ready to freeze for V1, which wi...Truecrafting: Truecrafting 0.52: fixed several trinkets that broke just before i released 0.51, sorry fixed water elemental not doing anything while summoned if not using glyph o...Truecrafting: Truecrafting 0.53: fixed mp5 calculations when gear contained mp5 and made the formulas more efficient no need to rebuild profiles with this release if placed in th...umbracoSamplePackageCreator (beta): Working Beta: For Visual Studio 2008 creating packages for Umbraco 4.0.3.VCC: Latest build, v2.1.30307.0: Automatic drop of latest buildVCC: Latest build, v2.1.30308.0: Automatic drop of latest buildVOB2MKV: vob2mkv-1.0.3: This is a maintenance update of the VOB2MKV utility. The MKVMUX filter now describes the cluster locations using a separate SeekHead element at th...WPFValidators: WPFValidators 1.0 Beta: Primeira versão do componente ainda em Beta, pode ser utilizada em produção pois esta funcionando bem e as futuras alterações não sofreram muito im...WSDLGenerator: WSDLGenerator 0.0.06: - Added option to generate SharePoint compatible *disco.aspx file. - Changed commandline optionsWSP Listener: WSP Listener version 1.0.0.0: First version of the WSP Listener includes: Easy cop[y paste installation of WSP solutions Extended logging E-mail when installation is finish...Yet another pali text reader: Pali Text Reader App v1.1: new features/updates + search history is now a tab + format codes in dictionary + add/edit terms in the dictionary + pali keyboard inserts symbols...Most Popular ProjectsMetaSharpi4o - Indexed LINQResExBraintree Client LibraryGeek's LibrarySharepoint Feature ManagerConfiguration ManagementOragon Architecture SqlBuilderTerrain Independant Navigating Automaton v2.0WBFS ManagerMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web ServicesFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryTeam FTW - Software ProjectIonics Isapi Rewrite Filter

  Read the article

• Is there a way to make a zenity dialog modal?

  - by math

  How can I make them modal? With modal I mean: The dialog should block the desktop so the user has only two options: Either cancel the dialog or enter text into it. (I want this basically because new windows might popup and can steal focus and additionally that other programs can access configuration files inside that container) Background: I want to ask a passphrase after login for an encfs container. So either entering a pass, or continue with cancellation of this dialog. Note: This is not a duplicate of modal dialog popup alarm, as I am interested especially in a solution to Zenity dialogs.

  Read the article

• ActiveSync gives a 401.2 error

  - by Justin James

  Hello - I've been struggling for a while with a problem with ActiveSync, it is giving 401.2 errors when trying to access the mailboxes. Oddly enough, clients can get to the calendars just fine. I've tried from an Android device as well as the Exchange remote connectivity troubleshooter, same error both times. Here is the configuration: Connectivity through ISA 2006 Exchange 2007 on Windows 2008 Basic authentication is on ISA is passing through all authentication directly to the Exchange server The user IS allowed to get to ActiveSync in their Exchange mailbox settings I have tried the following, without success: * Making SSL not required * Enabling Windows Integrated and Digest authentication Here is an example of the errors in the IIS log: OPTIONS /Microsoft-Server-ActiveSync/default.eas - 443 - 192.168.32.18 TestActiveSyncConnectivity 401 2 5 0 Here is what I am seeing in my trace log: ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) I'm 100% stumped. Any clues? Thanks! J.Ja

  Read the article

• Watchguard config, drop-in or mixed-routing mode?

  - by vfilby

  I have a Watchguard XTM 2 that is currently acting as a firewall and a router for my business network, I currently have the WG setup in mixed-routing mode and am happy with the current configuration. The reason I am curious about drop-in mode is because I would like to use all the interfaces on the back of the watchguard for the same subnet. My understanding is that drop-in mode will put them all on the same subnet, but it is unclear from the manual that the routing/firewall/vpn will still work as expected. This WG is right behind a DSL modem that is setup in bridge mode, so the WG is handling all PPPoE auth and routing for the network.

  Read the article

• "Vidalia detected that the Tor software exited unexpectedly."

  - by Brian

  I can start and kill tor via command line, but I want to control it with Vidalia. The browser bundle works, but I'd rather not use it. This is the message log in vidalia: Sep 25 19:29:13.696 [Notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Sep 25 19:29:13.696 [Notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Sep 25 19:29:13.696 [Notice] Read configuration file "/home/brian/.vidalia/torrc". Sep 25 19:29:13.697 [Notice] Initialized libevent version 2.0.16-stable using method epoll (with changelist). Good. Sep 25 19:29:13.697 [Notice] Opening Socks listener on 127.0.0.1:9050 Sep 25 19:29:13.697 [Warning] /var/run/tor is not owned by this user (brian, 1000) but by debian-tor (114). Perhaps you are running Tor as the wrong user? Sep 25 19:29:13.697 [Warning] Before Tor can create a control socket in "/var/run/tor/control", the directory "/var/run/tor" needs to exist, and to be accessible only by the user account that is running Tor. (On some Unix systems, anybody who can list a socket can connect to it, so Tor is being careful.) Sep 25 19:29:13.698 [Notice] Closing partially-constructed Socks listener on 127.0.0.1:9050 Sep 25 19:29:13.698 [Warning] Failed to parse/validate config: Failed to bind one of the listener ports. Sep 25 19:29:13.698 [Error] Reading config failed--see warnings above.

  Read the article

• SQL Server and Hyper-V Dynamic Memory Part 2

  - by SQLOS Team

  Part 1 of this series was an introduction and overview of Hyper-V Dynamic Memory. This part looks at SQL Server memory management and how the SQL engine responds to changing OS memory conditions.   Part 2: SQL Server Memory Management As with any Windows process, sqlserver.exe has a virtual address space (VAS) of 4GB on 32-bit and 8TB in 64-bit editions. Pages in its VAS are mapped to pages in physical memory when the memory is committed and referenced for the first time. The collection of VAS pages that have been recently referenced is known as the Working Set. How and when SQL Server allocates virtual memory and grows its working set depends on the memory model it uses. SQL Server supports three basic memory models:   1. Conventional Memory Model   The Conventional model is the default SQL Server memory model and has the following properties: - Dynamic - can grow or shrink its working set in response to load and external (operating system) memory conditions. - OS uses 4K pages – (not to be confused with SQL Server “pages” which are 8K regions of committed memory).- Pageable - Can be paged out to disk by the operating system.   2. Locked Page Model The locked page memory model is set when SQL Server is started with "Lock Pages in Memory" privilege*. It has the following characteristics: - Dynamic - can grow or shrink its working set in the same way as the Conventional model.- OS uses 4K pages - Non-Pageable – When memory is committed it is locked in memory, meaning that it will remain backed by physical memory and will not be paged out by the operating system. A common misconception is to interpret "locked" as non-dynamic. A SQL Server instance using the locked page memory model will grow and shrink (allocate memory and release memory) in response to changing workload and OS memory conditions in the same way as it does with the conventional model.   This is an important consideration when we look at Hyper-V Dynamic Memory – “locked” memory works perfectly well with “dynamic” memory.   * Note in “Denali” (Standard Edition and above), and in SQL 2008 R2 64-bit (Enterprise and above editions) the Lock Pages in Memory privilege is all that is required to set this model. In 2008 R2 64-Bit standard edition it also requires trace flag 845 to be set, in 2008 R2 32-bit editions it requires sp_configure 'awe enabled' 1.   3. Large Page Model The Large page model is set using trace flag 834 and potentially offers a small performance boost for systems that are configured with large pages. It is characterized by: - Static - memory is allocated at startup and does not change. - OS uses large (>2MB) pages - Non-Pageable The large page model is supported with Hyper-V Dynamic Memory (and Hyper-V also supports large pages), but you get no benefit from using Dynamic Memory with this model since SQL Server memory does not grow or shrink. The rest of this article will focus on the locked and conventional SQL Server memory models.   When does SQL Server grow? For “dynamic” configurations (Conventional and Locked memory models), the sqlservr.exe process grows – allocates and commits memory from the OS – in response to a workload. As much memory is allocated as is required to optimally run the query and buffer data for future queries, subject to limitations imposed by:   - SQL Server max server memory setting. If this configuration option is set, the buffer pool is not allowed to grow to more than this value. In SQL Server 2008 this value represents single page allocations, and in “Denali” it represents any size page allocations and also managed CLR procedure allocations.   - Memory signals from OS. The operating system sets a signal on memory resource notification objects to indicate whether it has memory available or whether it is low on available memory. If there is only 32MB free for every 4GB of memory a low memory signal is set, which continues until 64MB/4GB is free. If there is 96MB/4GB free the operating system sets a high memory signal. SQL Server only allocates memory when the high memory signal is set.   To summarize, for SQL Server to grow you need three conditions: a workload, max server memory setting higher than the current allocation, high memory signals from the OS.    When does SQL Server shrink caches? SQL Server as a rule does not like to return memory to the OS, but it will shrink its caches in response to memory pressure. Memory pressure can be divided into “internal” and “external”.   - External memory pressure occurs when the operating system is running low on memory and low memory signals are set. The SQL Server Resource Monitor checks for low memory signals approximately every 5 seconds and it will attempt to free memory until the signals stop.   To free memory SQL Server does the following: ·         Frees unused memory. ·         Notifies Memory Manager Clients to release memory o   Caches – Free unreferenced cache objects. o   Buffer pool - Based on oldest access times.   The freed memory is released back to the operating system. This process continues until the low memory resource notifications stop.    - Internal memory pressure occurs when the size of different caches and allocations increase but the SQL Server process needs to keep its total memory within a target value. For example if max server memory is set and certain caches are growing large, it will cause SQL to free memory for re-use internally, but not to release memory back to the OS. If you lower the value of max server memory you will generate internal memory pressure that will cause SQL to release memory back to the OS.    Memory pressure handling has not changed much since SQL 2005 and it was described in detail in a blog post by Slava Oks.   Note that SQL Server Express is an exception to the above behavior. Unlike other editions it does not assume it is the most important process running on the system but tries to be more “desktop” friendly. It will empty its working set after a period of inactivity.   How does SQL Server respond to changing OS memory?    In SQL Server 2005 support for Hot-Add memory was introduced. This feature, available in Enterprise and above editions, allows the server to make use of any extra physical memory that was added after SQL Server started. Being able to add physical memory when the system is running is limited to specialized hardware, but with the Hyper-V Dynamic Memory feature, when new memory is allocated to a guest virtual machine, it looks like hot-add physical memory to the guest. What this means is that thanks to the hot-add memory feature, SQL Server 2005 and higher can dynamically grow if more “physical” memory is granted to a guest VM by Hyper-V dynamic memory.   SQL Server checks OS memory every second and dynamically adjusts its “target” (based on available OS memory and max server memory) accordingly.   In “Denali” Standard Edition will also have sqlserver.exe support for hot-add memory when running virtualized (i.e. detecting and acting on Hyper-V Dynamic Memory allocations).   How does a SQL Server workload in a guest VM impact Hyper-V dynamic memory scheduling?   When a SQL workload causes the sqlserver.exe process to grow its working set, the Hyper-V memory scheduler will detect memory pressure in the guest VM and add memory to it. SQL Server will then detect the extra memory and grow according to workload demand. In our tests we have seen this feedback process cause a guest VM to grow quickly in response to SQL workload - we are still working on characterizing this ramp-up.    How does SQL Server respond when Hyper-V removes memory from a guest VM through ballooning?   If pressure from other VM's cause Hyper-V Dynamic Memory to take memory away from a VM through ballooning (allocating memory with a virtual device driver and returning it to the host OS), Windows Memory Manager will page out unlocked portions of memory and signal low resource notification events. When SQL Server detects these events it will shrink memory until the low memory notifications stop (see cache shrinking description above).    This raises another question. Can we make SQL Server release memory more readily and hence behave more "dynamically" without compromising performance? In certain circumstances where the application workload is predictable it may be possible to have a job which varies "max server memory" according to need, lowering it when the engine is inactive and raising it before a period of activity. This would have limited applicaability but it is something we're looking into.   What Memory Management changes are there in SQL Server “Denali”?   In SQL Server “Denali” (aka SQL11) the Memory Manager has been re-written to be more efficient. The main changes are summarized in this post. An important change with respect to Hyper-V Dynamic Memory support is that now the max server memory setting includes any size page allocations and managed CLR procedure allocations it now represents a closer approximation to total sqlserver.exe memory usage. This makes it easier to calculate a value for max server memory, which becomes important when configuring virtual machines to work well with Hyper-V Dynamic Memory Startup and Maximum RAM settings.   Another important change is no more AWE or hot-add support for 32-bit edition. This means if you're running a 32-bit edition of Denali you're limited to a 4GB address space and will not be able to take advantage of dynamically added OS memory that wasn't present when SQL Server started (though Hyper-V Dynamic Memory is still a supported configuration).   In part 3 we’ll develop some best practices for configuring and using SQL Server with Dynamic Memory. Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Two Virtualization Webinars This Week

  - by chris.kawalek(at)oracle.com

  If you're interested in virtualization, be sure to catch our two free webinars this week. You'll hear directly from Oracle technologists and can ask questions in a live Q&A. Deploying Oracle VM Templates for Oracle E-Business Suite and Oracle PeopleSoft Enterprise Applications Tuesday, Feb 15, 2011 9AM Pacific Time Register Now Is your company trying to manage costs; meet or beat service level agreements and get employees up and running quickly on business-critical applications like Oracle E-Business Suite and Oracle PeopleSoft Enterprise Applications? The fastest way to get the benefits of these applications deployed in your organization is with Oracle VM Templates. Cut application deployment time from weeks to just hours or days. Attend this session for the technical details of how your IT department can deliver rapid software deployment and eliminate installation and configuration costs by providing pre-installed and pre-configured software images. Increasing Desktop Security for the Public Sector with Oracle Desktop Virtualization Thursday, Feb 17, 2011 9AM Pacific Time Register Now Security of data as it moves across desktop devices is a concern for all industries. But organizations such as law enforcement, local, state, and federal government and others have higher security ne! eds than most. A virtual desktop model, where no data is ever stored on the local device, is an ideal architecture for these organizations to deploy. Oracle's comprehensive portfolio of desktop virtualization solutions, from thin client devices, to sever side management and desktop hosting software, provide a complete solution for this ever-increasing problem.

  Read the article

• Extended JMS Support

  - by ACShorten

  In a previous post I discussed the real time JMS integration we added in FW4.1 and also as patches for FW2.2. There are some additional aspects of this integration I did not mention which may be of interest: JMS Topic Support - In the post I concentrated on talking about JMS Queue support but failed to mention that the MDB and outgoing real time JMS also supports JMS Topics. JMS Queues are typically used for point to point decoupled integration and JMS Topics are used for hub integration that uses Publish and Subscribe. JMS Selector Support - By default the MDB will process every message from a JMS resource (Queue or Topic). If you want to alter this behaviour to selectively filter JMS messages then you can use JMS Selectors to specify the conditions for the MDB to selectively process JMS messages based upon conditions. JMS Selectors allow filters to be specified on elements in the JMS Header and JMS Message Properties using SQL like syntax. Note: JMS Selectors do not support filters on the body elements. JMS Header Support - It is possible to place custom information in the JMS Header and JMS Message Properties for outgoing messages (so that other applications can use JMS selectors if necessary as well). This is only available when installing Patches 11888040 (FW4.1) and 11850795 (FW2.2). These facilities coupled with the JMS facilities described in the previous posts gives the product integration capabilities in JMS which can be used with configuration rather than coding. Of course, the JMS facility I have described can also be used in conjunction with SOA Suite to provide greater levels of traceability and management.

  Read the article

• Ammy admin - remote desktop is unavailable error after connect

  - by javapowered

  I'm using Ammyy Admin. I've set all permisions. However once connected I receive "Remote desktop is unavailable" message. Why and how to fix this? upd if I have windows rdp connected then I'm able to use ammyy admin rdp. But once i disconnect windows rdp, ammyy admin rdp is also disconnected. This is strange and makes ammyy admin useless (in my configuration). I need ammyy admin rdp to work even if windows rdp is not connected.

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >