Search Results

Search found 14339 results on 574 pages for 'domain rename'.

Page 309/574 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• DPM server 2010 Attach agent error : administrator privileges missing?

  - by Michael

  I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

  Read the article

• Users are getting a temporary profile

  - by Serhiy

  A bit about current setup: It is windows 2008 R2 AD servers (all of them are 2008R2) and couple locations which set as Sites. Each location has DFS on AD server. Roaming profiles are not used nor configured. Users have their home folder configured as mapped S: drive to DFS shared folder. For example: in profile tab user has: Home Folder - connect - S: to \\domain.com\dc\users\%username% We also have redirected Desktop, Documents and Downloads folders to \\domain.com\dc\users. Everything was fine. Suddenly (today), users in most locations lost their local profile (both XP and W7 desktops) and got temporary profiles. Also, it looks like local profile was created today (from folder properties). I checked events at couple machines and there is not errors related to profiles or logon process. I do not see issues in event logs at servers as well. Basically, I run out of ideas what is wrong and why machines lost their local profiles. PS: Laptop users do not have their folders redirected, but lost profiles as well.

  Read the article

• Does Active Directory on Server 2003 R2 support IPv6 subnets in Sites and Services?

  - by NorbyTheGeek

  I've been experimenting with IPv6 at our organization. The domain controllers (all 2003 R2) and most of the servers (2003 R2 / 2008 / 2008 R2) have IPv6 configured. We have a subnet assigned through a tunnel provider. Currently, the only workstation that is running IPv6 is mine. (Windows 7) I have been noticing that my workstation is picking domain controllers in other sites for things like DFS, and I finally realized that I don't have the IPv6 subnets set up in Active Directory Sites and Services (ADSS). But when I try to add a IPv6 prefix in ADSS, it tells me: Windows cannot create the object 2001:xxxx:xxxx:xxxx::/64 because: The object name has bad syntax. I believe I may be using the 2008 version of the admin tools (ADSS reports version 6.1.7601.17514) so I'm wondering if maybe my 2003 R2 Active Directory schema doesn't support configuring IPv6 subnets in ADSS. Is this true? UPDATE Even with 2008 R2 schema in Active Directory, I'm having the same problem. How can I get my IPv6 subnets into Sites and Services?

  Read the article

• What can I do with a home server?

  - by Joel Coehoorn

  I have an old 700 Mhz Pentium III at home running Windows 2000 Server, with a home router set up to pass incoming requests to it and a DynDNS account set up so it's easy to find. Right now I'm using it for a number of things: Shared folders + backup inside the home network Shared Printer inside the home network Domain Controller, just because I feel like it and because it's useful to me as practice to keep those "enterprise" administration skills. Web Server FTP remote access for my files. I abandoned this for security reasons, but it's still worth leaving visible. Remote Desktop in to the home network (thinking about adding VPN service) SVN repository MySQL - Will be moving to SQL Server 2008 Standard soon. After I upgrade my wife's laptop from home to pro later this year it will also become a domain controller It's the only place I still have access to Internet Explorer 6 any more without setting up a new virtual machine, so I use it for testing code with that browser. The question is: What else could I be doing with this machine? Update Additional ideas based on the suggestions: Media Server/DVR Build server PBX SSH Proxy Server Continuous Integration Server Personal OpenID Provider Update2 Just a note that this server was recently upgraded to an Atom330 with 2 GB ram and bigger hard drive. For all that's slow for a "modern" cpu, it should still be much faster than the old Pentium III and the expected power savings should make the upgrade essentially free over the course of the next year or two. Also, it's now running Windows Server 2008.

  Read the article

• Reverse Proxy issues IIS on Windows Server 2012

  - by ahwm

  I've tried searching, but nothing seems to be working. I have a feeling it might be due to our custom Rewrite module. Here is the excerpt from the web.config that sets it up: <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRewriteModule" type="EShop.UrlRewriteModule"/> </modules> EShop.UrlRewriteModule is a custom class in App_Code which handles incoming requests. I have set up the rewrite rules but it doesn't seem to want to work. I'm inclined to think that our rewrite class is interfering earlier than the proxy rules and saying that the page doesn't exist. Here's what we're trying to accomplish: We are working on a new site for a client, but they have a forum that they're not likely to want to move. I set up a new subdomain to point to the new server while the site is being completed (before we go live) and want the reverse proxy to forward test.domain.com/forum to www.domain.com/forum. After the site goes live, we'll need to forward using an IP address instead. I've set up a reverse proxy successfully with nginx, but we didn't want to set up another server if we didn't need to. Ideas?

  Read the article

• Google Apps, SPF, softfail problem (validates with validation tools, but still softfails otherwise)

  - by mq.chen

  Hi, I guess this is probably a commonly asked and boring question but I'm really at a loss and I don't know what else to do. This might be a duplicate of other questions, but none of the solutions worked for me. I've Googled around and read just about anything I could find but I'm still puzzled as to why it doesn't work. The gist of my problem is that I have set-up Google Apps for a client of mine with the domain fintan.dk. Everthing works just excellent, except emails sent from *@fintan.dk (either with the Gmail web-interface or desktop client) to a non-Google Apps email gets a softfail (I have sent to my University email, an email hosted at MediaTemple and even Hotmail). The emails gets a pass when sent to a Google Apps or Gmail address though... (All emails from that domain are sent via email clients.) So this is what I have done so far: I've added the SPF record Google recommended (v=spf1 include:_spf.google.com ~all), waited several days hoping it would a DNS update delay problem. Now, three days later there is no change. I have verified the settings in the desktop clients several times. I have validated the records with validation tools like the SPF Query Tool, [email protected] and [email protected]. All of them validate and gives a pass, saying there shouldn't be a problem, but strangely there still is. So, I really don't know what else to do. Any help is very much appreciated. Thank you in advance!

  Read the article

• How to get http requests details in a tcpdump?

  - by tucson

  I am trying to get a tcpdump trace of some http requests. Here is what I got so far (I replaced the real IP addresses with REMOTE and LOCAL): C:\>Windump -na -i 3 ip host REMOTE and ip src LOCAL and tcp port 80 Windump: listening on \Device\NPF_{8056BE5E-BDBB-44E6-B492-9274B410AD66} 13:13:34.985460 IP LOCAL.4261 > REMOTE.80: . 1784894764:1784894765(1) ack 1268208398 win 65535 13:13:38.589175 IP LOCAL.4302 > REMOTE.80: F 3708464308:3708464308(0) ack 982485614 win 65535 13:13:38.589285 IP LOCAL.4303 > REMOTE.80: F 890175362:890175362(0) ack 2462862919 win 65535 13:13:38.589330 IP LOCAL.4304 > REMOTE.80: F 1838079178:1838079178(0) ack 156173959 win 65535 13:13:38.589374 IP LOCAL.4305 > REMOTE.80: F 3952718843:3952718843(0) ack 2209231545 win 65535 13:13:38.589413 IP LOCAL.4306 > REMOTE.80: F 446105750:446105750(0) ack 3141849979 win 65535 13:13:38.590265 IP LOCAL.4302 > REMOTE.80: . ack 2 win 65535 13:13:38.590403 IP LOCAL.4304 > REMOTE.80: . ack 2 win 65535 13:13:38.590429 IP LOCAL.4303 > REMOTE.80: . ack 2 win 65535 13:13:38.590484 IP LOCAL.4305 > REMOTE.80: . ack 2 win 65535 13:13:38.590514 IP LOCAL.4306 > REMOTE.80: . ack 2 win 65535 But I do not get the following level of details: Request URL:http://domain.com/index.php Request Method:POST Status Code:200 OK POST /index.php HTTP/1.1 Host: domain.com Connection: keep-alive Content-Length: 151 Cache-Control: max-age=0 etc How can I get this level of data?

  Read the article

• (updated) Subfolder needs whitelist and standard redirect for all others

  - by Superstrong

  How can I allow access to the foo.html files in the .com/song/private/ subfolder for: a logged-in Wordpress user; or any referral domains (including subfolders) I add; or any URL on our own domain from the com/song/private folder; For all others, the user should be redirected to the corresponding public version of the Post, which is the same html filename and structured .com/song/foo.html. (The private versions uses a different template with different custom fields for each Post.) Update: Here's what I have so far: <Limit GET POST> order deny,allow deny from all allow from domain.com/song/private allow from otherdomain.com </Limit> RewriteRule ^(.*)$ ../$ [NC,L] More: Will that last rewrite rule take people back to the public version, from com/song/private/foo.html to com/song/foo.html? I found the following rule for detecting Wordpress logged-in status, but what do I put aferward with a RewriteRule, and will it work anyway? (If not, is there an alternative?) RewriteCond %{HTTP_COOKIE} !^.*wordpress_logged_in_.*$ N.B. I have added code to my root .htaccess allowing me to insert additional .htaccess files in other subfolders as needed. Copied from Stack Overflow, where they suggested I ask here.

  Read the article

• Migrating WebLogic 10.3.0 to new host. Slow managed server startup times

  - by wadevondoom

  We are migrating our Blue Martini Commerce application (only supported on WebLogic 10.3.0) to a new host (Redhat 6.3 on a VMWare ESX vm). We are seeing extremely slow start up times for our managed server(s) that is basically 20x slower than our current production. As a for instance the Publish managed server takes ~30 - 45 seconds in current production and in the new environment it takes ~10 minutes. The setup uses the same domain structure and JVM as the current production environment. The same setup files are used. We use jdk1.6.0_33 on 64 bit architecture. We used the generic 64bit weblogic installer and used pack / unpack utilities to migrate the domain. The JAVA_OPTS to start this server are: "-d64 -Xms256m -Xmx512m -XX:PermSize=48m -XX:MaxPermSize=256m" The sysadmins have checked /etc/sysctl.conf and /etc/limits.conf to ensure we were not hitting some kind of process limit. As I am not sure what this managed server does from a Blue Martini perspective during the phase of startup I also had the DBA check to ensure that Oracle RAC (11.2.0.3) wasn't also hitting some kind of process limit or if there was a tns listener issue. The new host is quite a bit stricter with their server lock downs so there are a few differences.... Redhat 6.3 in new env, RH 5.7 in current SElinux is targeted in new env and disabled in current VM in new env and dedicated hardware in current iptables disabled in current. It was enabled in new prod but I had them disable it just in case I apologize for not being more specific. I am mostly hoping got some tips. I do not have the typical root access I would normally have in this environment. I am just hoping got a path forward. I did a few 'kill -3' to see if there are blocked threads and I got nadda. The service works for all intents and purposes it is just painfully slow. Thanks you all in advance for reading and best regards. Wade

  Read the article

• Puppet write hosts using api call

  - by Ben Smith

  I'm trying to write a puppet function that calls my hosting environment (rackspace cloud atm) to list servers, then update my hosts file. My get_hosts function is currently this: require 'rubygems' require 'cloudservers' module Puppet::Parser::Functions newfunction(:get_hosts, :type => :rvalue) do |args| unless args.length == 1 raise Puppet::ParseError, "Must provide the datacenter" end DC = args[0] USERNAME = DC == "us" ? "..." : "..." API_KEY = DC == "us" ? "..." : "..." AUTH_URL = DC == "us" ? CloudServers::AUTH_USA : CloudServers::AUTH_UK DOMAIN = "..." cs = CloudServers::Connection.new(:username => USERNAME, :api_key => API_KEY, :auth_url => AUTH_URL) cs.list_servers_detail.map {|server| server.map {|s| { s[:name] + "." + DC + DOMAIN => { :ip => s[:addresses][:private][0], :aliases => s[:name] }}} } end end And I have a hosts.pp that calls this and 'should' write it to /etc/hosts. class hosts::us { $hosts = get_hosts("us") hostentry { $hosts: } } define hostentry() { host{ $name: ip => $name[ip], host_aliases => $name[aliases] } } As you can imagine, this isn't currently working and I'm getting a 'Symbol as array index at /etc/puppet/manifests/hosts.pp:2' error. I imagine, once I've realised what I'm currently doing wrong there will be more errors to come. Is this a good idea? Can someone help me work out how to do this?

  Read the article

• How to have LiveJournal delegate my OpenID to something else?

  - by T-Boy

  I understand that if I have full control over my domain, I can set it up so that I can delegate the task of authenticating to another OpenID service provider. The problem is, what I'd like to do is to get the LiveJournal server to pass the authentication to someone else, instead of having LJ doing it. Preferably what I'd like to do is get LiveJournal, when asked by a web site, say, "No, I don't do it anymore -- go to this address". The plan was that this address would then be in a domain I fully control, which then would pass it on to whichever service provider I choose. I don't even know if I've gotten my understanding of OpenID right, if all this shenanigans are necessary, if my question makes sense, or if it's even possible with a service provider like Livejournal. ETA: Doing a little more reading up, and examining the source for my LiveJournal user page, I note that this particular line in the file's <header> area: <link rel="openid.server" href="http://www.livejournal.com/openid/server.bml" /> I suspect that changing this will allow me to forward OpenID requests to whomever I wish, I think; so far so good. Now comes the hard part -- figuring out how to change all of that using LiveJournal's customization options, if that is at all possible (here's hoping I don't need to pay to get that functionality).

  Read the article

• Ngix rewrite is not working as expected

  - by SamFisher83

  I am trying to learn how to use nginx and how to use its rewrite functionality Nginx seems to be doing the rewrite: 2012/03/27 16:30:26 [notice] 16216#0: *3 "foo.php" matches "/foo.php", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" 2012/03/27 16:30:26 [notice] 16216#0: *3 rewritten data: "img.php", args: "", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" but in my access log I am getting the following: 61.90.22.223 - - [27/Mar/2012:16:26:54 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" 61.90.22.223 - - [27/Mar/2012:16:30:26 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" There is an img.php in the root directory so I am not sure why I am getting a 404 error Here is part of the configuration block: rewrite foo.php img.php last; location / { try_files $uri $uri/ /index.html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; }

  Read the article

• Dual DC Time Service

  - by poconnor

  I believe I'm having an issue with my Domain Controllers and Time Server. On my back up DC, I keep seeing a warning stating "The time service has stopped advertising as a time source because the local clock is not synchronized." Does this mean that my backup DC believes it's a Time Server? My PDC should be the time server and I have gone through setting up the PDC as the time server. I was not around for the original setup of the time server with the old PDC and Backup DC. But I believe the old PDC was the time server so I setup the new PDC as the new time server, when I decommissioned the old PDC. Is it possible that the Backup DC was setup as the time server and it still thinks it's suppose to be giving out time to everyone? Registry for PDC has NTP Registry for Backup has NT5D5 Results of w32tm /monitor Getting AD DC list for default domain... Analyzing:delayoffset from DC1.local..com Stratum: 4 delayoffset from DC1.local..com Stratum: 3 Warning: Reverse name resolution is best effort. It may not be correct since RefID field in time packets differs across NTP implementations and may not be using IP addresses. DC2.local..com[192.168.1.8:123]: ICMP: 1ms NTP: -0.6349491s RefID: DC1.local..com [192.168.1.9] DC1.local..com *** PDC ***[192.168.1.9:123]: ICMP: 0ms NTP: +0.0000000s RefID: wwwco1test12.microsoft.com [65.55.21.20]

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• Subversion error: Repository moved permanently to please relocate

  - by Bart S.

  I've set up subversion and apache on my server. If I browse to it through my webbrowser it works fine (http://svn.host.com/reposname). However, if I do a checkout on my machine I get the following error: Command: Checkout from http://svn.host.com/reposname, revision HEAD, Fully recursive, Externals included Error: Repository moved permanently to 'http://svn.host.com/reposname/'; please relocate I checked apache's error log, but it doesn't say anything. (it does now - see edit) My repositories are stored under: /var/www/svn/repos/ My website is stored under: /var/www/vhosts/x/... Here's the conf file for the subdomain: <Location /> DAV svn SVNParentPath /var/www/svn/repos/ AuthType Basic AuthName "Authorization Realm" AuthUserFile /var/www/svn/auth/svn.htpasswd Require valid-user </Location> Authentication works fine. Does anyone know what might be causing this? -- Edit So I restarted apache (again) and tried it again and now it give me an error message, but it doesn't really help. Anyone have an idea what it means? [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] Could not fetch resource information. [403, #0] [Wed Mar 31 23:41:55 2010] [error] [client my.ip.he.re] (2)No such file or directory: The URI does not contain the name of a repository. [403, #190001] -- Edit 2 If I do svn info it doesn't give anything usefull: [root@eduro eduro.nl]# svn info http://svn.domain.com/repos/ Username: username Password for 'username': svn: Repository moved permanently to 'http://svn.domain.com/repos/'; please relocate I also tried doing a local checkout (svn checkout file:///var/www/svn/repos/reposname) and that works fine (also adding / commiting works fine). So it seems is has something to do with apache. Some other information: I'm running CentOs 5.3 Plesk 9.3 Subversion, version 1.6.9 (r901367) -- Edit 3 I tried moving the repositories, but it didn't make any difference. selinux is disabled so that isn't it either. -- Edit 4 Really? Nobody :(?

  Read the article

• SPF for two different outgoing servers?

  - by Marcus

  I have ran into a problem that I think someone should have a really clever answer for. Today we have our own mailserver that looks like "mail.domain.com" – which we use to send out mail to our customers (with a modified PHPMailer script). Usually around 5000 mails every day. Everything from customer support to invoices goes through there. The from-header is set to "[email protected]". We are now thinking of migrating to Google Apps for internal use (with 70+ users). However, we cannot use Gmails SMTP for sending "bulk" mails (they have a limit of 500 outgoing mails per day) so we really want to keep using our current system for sending automated mail to our customers – and using gmails SMTP for our internal use. So, how do we set up our SPF-records (Sender Policy Framework) for this? We do not want to get stuck in any filters for "spoofing" the sender from either type of account (the ones sent from our own server, and through Gmails). In short: we want to be able to use the same e-mail adress (for sending) on two different SMTP servers (and therefore two different IP-adresses). Anyone with a good knowledge off SPF who knows how to go about? Or if it is even possible? Anything else I should think of when switching to Google Apps?

  Read the article

• Redirecting or routing all traffic to OpenVPN on a Mac OS X client

  - by sdr56p

  I have configured an OpenVPN (2.2.1) server on an Ubuntu virtual machine in the Amazon elastic compute cloud. The server is up and running. I have installed OpenVPN (2.2.1) on a Mac OS X (10.8.2) client and I am using the openvpn2 binary to connect (in opposition to other clients like Tunnelblick or Viscosity). I can connect with the client and successfully ping or ssh the server through the tunnel. However, I can't redirect all internet traffic through the VPN even if I use the push "redirect-gateway def1 bypass-dhcp" option in the server.conf configurations. When I connect to the server with these configurations, I get a successful connection, but then an infinite series of error messages: "write UDPv4: No route to host (code=65)". Traffic routing seems to be compromised because I am not able to access anything anymore, not even the OpenVPN server (by pinging 10.8.0.1 for instance). This is beyond me. I am finding little help on the web and don't know what to try next. I don't think it is a problem of forwarding the traffic on the server since, first, I have also took care of that and, second, I can't even ping the VPN server locally through the tunnel (or ping anything at all for that matter). Thank you for your help. Here is the server.conf. file: port 1194 proto udp dev tun ca ca.crt cert ec2-server.crt key ec2-server.key # This file should be kept secret dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 And the client.conf file: client dev tun proto udp remote servername.com 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert Toto5.crt key Toto5.key ns-cert-type server comp-lzo verb 3 Here is the connection log with the error messages: $ sudo openvpn2 --config client.conf Wed Mar 13 22:58:22 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:22 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:22 2013 LZO compression initialized Wed Mar 13 22:58:22 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:22 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:22 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:22 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:22 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:22 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:22 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:22 2013 TLS: Initial packet from 54.234.43.171:1194, sid=ffbaf343 d0c1a266 Wed Mar 13 22:58:22 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:22 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:22 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:23 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:23 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:23 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:58:25 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:58:25 2013 PUSH: Received control message: 'PUSH_REPLY,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:58:25 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:58:25 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:58:25 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:58:25 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:58:25 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:58:25 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:25 2013 Initialization Sequence Completed ^CWed Mar 13 22:58:30 2013 event_wait : Interrupted system call (code=4) Wed Mar 13 22:58:30 2013 TCP/UDP: Closing socket Wed Mar 13 22:58:30 2013 /sbin/route delete -net 10.8.0.0 10.8.0.5 255.255.255.0 delete net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:58:30 2013 Closing TUN/TAP interface Wed Mar 13 22:58:30 2013 SIGINT[hard,] received, process exiting toto5:ttntec2 Dominic$ sudo openvpn2 --config client.conf --remote ec2-54-234-43-171.compute-1.amazonaws.com Wed Mar 13 22:58:57 2013 OpenVPN 2.2.1 x86_64-apple-darwin12.2.0 [SSL] [LZO2] [eurephia] built on Mar 4 2013 Wed Mar 13 22:58:57 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Wed Mar 13 22:58:57 2013 LZO compression initialized Wed Mar 13 22:58:57 2013 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Mar 13 22:58:57 2013 Socket Buffers: R=[196724->65536] S=[9216->65536] Wed Mar 13 22:58:57 2013 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Wed Mar 13 22:58:57 2013 Local Options hash (VER=V4): '41690919' Wed Mar 13 22:58:57 2013 Expected Remote Options hash (VER=V4): '530fdded' Wed Mar 13 22:58:57 2013 UDPv4 link local: [undef] Wed Mar 13 22:58:57 2013 UDPv4 link remote: 54.234.43.171:1194 Wed Mar 13 22:58:57 2013 TLS: Initial packet from 54.234.43.171:1194, sid=a0d75468 ec26de14 Wed Mar 13 22:58:58 2013 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 VERIFY OK: nsCertType=SERVER Wed Mar 13 22:58:58 2013 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funst ... ost.domain Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Mar 13 22:58:58 2013 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Mar 13 22:58:58 2013 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Mar 13 22:58:58 2013 [ec2-server] Peer Connection Initiated with 54.234.43.171:1194 Wed Mar 13 22:59:00 2013 SENT CONTROL [ec2-server]: 'PUSH_REQUEST' (status=1) Wed Mar 13 22:59:00 2013 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route 10.8.0.0 255.255.255.0,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: timers and/or timeouts modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: --ifconfig/up options modified Wed Mar 13 22:59:00 2013 OPTIONS IMPORT: route options modified Wed Mar 13 22:59:00 2013 ROUTE default_gateway=0.0.0.0 Wed Mar 13 22:59:00 2013 TUN/TAP device /dev/tun0 opened Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 delete ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address Wed Mar 13 22:59:00 2013 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure Wed Mar 13 22:59:00 2013 /sbin/ifconfig tun0 10.8.0.6 10.8.0.5 mtu 1500 netmask 255.255.255.255 up Wed Mar 13 22:59:00 2013 /sbin/route add -net 54.234.43.171 0.0.0.0 255.255.255.255 add net 54.234.43.171: gateway 0.0.0.0 Wed Mar 13 22:59:00 2013 /sbin/route add -net 0.0.0.0 10.8.0.5 128.0.0.0 add net 0.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 128.0.0.0 10.8.0.5 128.0.0.0 add net 128.0.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 /sbin/route add -net 10.8.0.0 10.8.0.5 255.255.255.0 add net 10.8.0.0: gateway 10.8.0.5 Wed Mar 13 22:59:00 2013 Initialization Sequence Completed Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:00 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:01 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) Wed Mar 13 22:59:02 2013 write UDPv4: No route to host (code=65) ... The routing table after a connection WITHOUT the push redirect-gateway (all traffic is not redirected to the VPN and everything is working fine, I can ping or ssh the OpenVPN server and access all other Internet resources through my default gateway): Destination Gateway Flags Refs Use Netif Expire default user148-1.wireless UGSc 50 0 en1 10.8/24 10.8.0.5 UGSc 2 7 tun0 10.8.0.5 10.8.0.6 UH 3 2 tun0 127 localhost UCS 0 0 lo0 localhost localhost UH 6 6692 lo0 client.openvpn.net client.openvpn.net UH 3 18 lo0 142.1.148/22 link#5 UCS 2 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 50 0 en1 76 user150-173.wirele localhost UHS 0 0 lo0 142.1.151.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSWi 0 0 en1 71 The routing table after a connection with the push redirect-gateway option enable as in the server.conf file above (all internet traffic should be redirected to the VPN tunnel, but nothing is working, I can't access any Internet ressources at all): Destination Gateway Flags Refs Use Netif Expire 0/1 10.8.0.5 UGSc 1 0 tun0 default user148-1.wireless UGSc 7 0 en1 10.8/24 10.8.0.5 UGSc 0 0 tun0 10.8.0.5 10.8.0.6 UHr 6 0 tun0 54.234.43.171/32 0.0.0.0 UGSc 1 0 en1 127 localhost UCS 0 0 lo0 localhost localhost UH 3 6698 lo0 client.openvpn.net client.openvpn.net UH 0 27 lo0 128.0/1 10.8.0.5 UGSc 2 0 tun0 142.1.148/22 link#5 UCS 1 0 en1 user148-1.wireless 0:90:b:27:10:71 UHLWIir 1 0 en1 833 user150-173.wirele localhost UHS 0 0 lo0 169.254 link#5 UCS 1 0 en1 169.254.255.255 0:90:b:27:10:71 UHLSW 0 0 en1

  Read the article

• W2003StdR2 server: DNS dysfunctional!

  - by Tor

  I hate to have to do this, but i feel up that creek with no... well, some of you might know. At the moment my one and only DNS server refuses to do Forwarding. The story is as goes: This site had 2 servers, one W2003SBS and an W2003StdR2. The SBS degraded over a short periode of time, and to not go down with it i decided to move all data over to the other server. This was of course an AD integrated site. Move went ok, the Std server removed from the domain, and the SBS put to rest. For the time being we decided to run the Std as a server only, and no AD. We renamed the internal domain to xxx.local, and set the server up with DNS, DHCP and installed WINS (not activated). Forwarding of DNS is to our ISP through a Netgear Firewall. The same address setup used as before. So - DNS server started and all went ok, clients reconfigured and hooked up and then - after a day's time - internet name resolution stopped working on the server! Nothing had changed, been altered, modified, nothing! What i now get when doing NSLOOKUP is just a 2 sec timeout response! And i have checked and looked, but to no avail. Anybody seen this behaviour before? And yes - ALL servicepacks have been updated on the server. I would be much obliged if anyone in here could lend an ear... and give advice! Thanks.... from Tor in Norway Today is the 14th, and i still have no resolution to this nagging problem. Anybody else got any advice in the matter? Please?

  Read the article

• restrict access to IIS virtual directory from root website

  - by senthilkumar-c

  Hi, I have two domains (domain1.com and domain2.com). Both of them use the same Windows hosting service with IIS7. One of the domains is being called the "primary domain" by my hosting provider and it always points to the root folder that I was given. For the other domain, I have created a virtual directory in IIS and pointed it there. The folder structure is like this - root --Default.aspx --domain2folder ----Default.aspx So, if I type domain1.com, I see the regulakr Default.aspx. But if I type domain2.com, I am shown the contents of domain2folder as if it were a separate web application - I think that is what IIS virtual directory is meant for. Well and good. But the problem is, when I type http://domain1.com/domain2folder/, I see the domain2's website! But I don't want that to be shown when I use the path like that from domain1. Only if they use domain2.com, user should be able to see those contents. How can I do that? Hope I am making sense. Thanks.

  Read the article

• Nginx Server Block Not Working? - Already running other vhosts just this one not working

  - by daveaspinall

  Im running a Debian 6 LEMP server with multiple virtual hosts and everything has been fine for 5 or so sites. But I've just tried adding another but for some reason it's just not working. By not working I mean in Chrome I get the "Oops! Google Chrome could not connect to subdomain.domain.net" error. I've changed the domain for security to subdomain.example.com and the IP is masked. Hosts file (I have multiple sub domains): xxx.xxx.xx.xxx *.example.com *.example Server Block: server { listen 80; server_name subdomain.example.com; access_log /srv/www/subdomain.example.com/logs/access.log; error_log /srv/www/subdomain.example.com/logs/error.log; root /srv/www/subdomain.example.com/public_html; location / { index index.html index.htm index.php; } location ~ \.php$ { include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } I've created the system link to the file in the /etc/nginx/sites-enabled/ directory and restarted/reloaded nginx. DNS seems fine: # ping -c 2 subdomain PING subdomain.example.com (xxx.xxx.xx.xxx) 56(84) bytes of data. 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=1 ttl=64 time=0.035 ms 64 bytes from www.example.com (xxx.xxx.xx.xxx): icmp_req=2 ttl=64 time=0.048 ms Checking the file with cURL works: # curl http://subdomain.example.com HTML - OK Emptied browser cache but still no dice. Anything I'm missing? Like I mentioned, I have a few sites running fine on the server currently so php-fpm etc etc are working. Any help would be much appreciated! Cheers, Dave

  Read the article

• Why does apache httpd tell me that my name-based virtualhosts only works with SNI enabled browers (RFC 4366)

  - by Arlukin

  Why does apache give me this error message in my logs? Is it a false positive? [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I have recently upgraded from Centos 5.7 to 6.3, and by that to a newer httpd version. I have always made my ssl virtualhost configurations like below. Where all domains that share the same certificate (mostly/always wildcard certs) share the same ip. But never got this error message before (or have I, maybe I haven't looked to enough in my logs?) From what I have learned this should work without SNI (Server Name Indication) Here is relevant parts of my httpd.conf file. Without this VirtualHost I don't get the error message. NameVirtualHost 10.101.0.135:443 <VirtualHost 10.101.0.135:443> ServerName sub1.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost> <VirtualHost 10.101.0.135:443> ServerName sub2.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost>

  Read the article

• Can sendmail be configured to discard routed email that has been rejected by the next hop?

  - by Guy Bolton King

  Background: We have a handful of hosts (running sendmail) acting as the MXs for a few domains each. Each domain is handled via the sendmail/cf /etc/mail/virtusertable, with a set of known recipients and a catch-all reject rule. Mail to postmaster on each host is aliased to root, and root is aliased to root+<host>@ourdomain.com. The MX for ourdomain.com is Google Apps, and [email protected] is a simple group that forwards to the admins. Google Apps will reject some emails at the SMTP stage, usually because of illegal attachments (instead of accepting them and filing them as spam). Problem: Given a particular spam email sent to a domain in a virtusertable entry: If the recipient address rejects the mail, then sendmail will try and send a DSN to the sender. If that sender also rejects the mail (because it's a falsified sender, and the MX for the sender rejects the mail as spam), then sendmail sends a DSN to the postmaster. The routing detailed above takes place, and...Google Apps rejects the mail as well. sendmail now gives up with a "savemail panic", and leaves the mail in the queue forever. Our mail queue fills up with garbage Is there any way I can get sendmail to discard messages that have been rejected by the next virtusertable hop (i.e. after step 1 in the Problem description)? Or does anyone have any other solutions to this?

  Read the article

• Questions about explorer.exe

  - by nmuntz

  Hi, I was given by my company a laptop with Windows XP Professional in Spanish. I would like to translate it to English, since I really DISLIKE to use localized versions of programs. I have read about Windows MUI packs, however you MUST have Windows XP Pro in English in order to translate it to other language, you can't translate it TO English from other language. Since reinstalling the OS using a Win XP CD in english is not an option (don't have the license nor the CD, and don't have domain privileges to rejoin my computer to the domain), I was wondering what are the essential files that contain localized strings of text. I was doing some research, and apparently explorer.exe has many of the Windows Error Messages and other strings. Will replacing my original explorer.exe with one from Windows XP in English be enough (and work) for having a "basic" english version of windows? Im mainly interested in having error messages, start menu, and the control panel in english. Also, does it HAVE to be the same version as the Service Pack im running? Besides explorer.exe are there any other essential files that i should try to get and replace? Do you see any "dangers" in replacing this files with english version ones? Thanks in advance for your help.

  Read the article

• How to find the source of a cryptic event viewer log

  - by mlsteeves

  I'm looking at the eventviewer logs, and I see a bunch Error entries in the Application log. (Windows Server 2008 R1). There is an error written to the logs about every 4 seconds. I need to find out which application is causing these events, is there anyway to find this out? Here is what each look like: Error 12/2/2010 12:00:09 PM Application 0 None The details for each error: Log Name: Application Source: Application Date: 12/2/2010 12:00:09 PM Event ID: 0 Task Category: None Level: Error Keywords: Classic User: N/A Computer: computer.domain Description: The description for Event ID 0 from source Application cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer. If the event originated on another computer, the display information had to be saved with the event. The following information was included with the event: the message resource is present but the message is not found in the string/message table Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application" /> <EventID Qualifiers="0">0</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-12-02T20:00:09.000Z" /> <EventRecordID>237167</EventRecordID> <Channel>Application</Channel> <Computer>computer.domain</Computer> <Security /> </System> <EventData> <Binary>534F434B...</Binary> </EventData> </Event>

  Read the article

• Google Apps: MX records for zonefile

  - by 23tux

  Hi everybody, I have a question about using Google Apps for handling emails. I don't want to set up a whole entire mail system on my server, so I decided to use Google Apps. The ownership of my domain is approved, and now I'm trying to change the MX records in the zone file of my domain. But I think I'm doing wrong, it doesn't work. I want to use mail.mydomain.com as a adress to the mail server for POP, SMTP and IMAP. My zone file looks like this: $TTL 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 2011011700 ; serial 14400 ; refresh 1800 ; retry 604800 ; expire 86400 ) ; minimum @ IN NS robotns3.second-ns.com. @ IN NS robotns2.second-ns.de. @ IN NS ns1.first-ns.de. @ IN A 111.111.111.111 localhost IN A 127.0.0.1 www IN A 111.111.111.111 ftp IN CNAME www loopback IN CNAME localhost mail IN CNAME @ relay IN CNAME www @ IN MX 10 ALT1.ASPMX.L.GOOGLE.COM. @ IN MX 10 ASPMX3.GOOGLEMAIL.COM. @ IN MX 10 ASPMX2.GOOGLEMAIL.COM. @ IN MX 10 ASPMX.L.GOOGLE.COM. @ IN MX 10 ALT2.ASPMX.L.GOOGLE.COM. I hope someone can figure out, what's wrong with this configuration. When I start a ping on mail.mydomain.org I get an answer from 111.111.111.111 and not from the google server ALT1.ASPMX.L.GOOGLE.COM. thx, tux

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >