Search Results

Search found 8589 results on 344 pages for 'pre production'.

Page 309/344 | < Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >

• Windows 7: How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• problem in run oracle server please help

  - by rima

  I used Oracle 11g, from few days ago I face below error: SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 7 07:33:19 2011 Copyright (c) 1982, 2010, Oracle. All rights reserved. Enter user-name: pentacms Enter password: ERROR: ORA-01033: ORACLE initialization or shutdown in progress Process ID: 0 Session ID: 0 Serial number: 0 Enter user-name: I try to solve the error, but it raised an other error, I try to open log file but I receive below error(last line) "ERROR at line 1: ORA-00600: internal error code, arguments: [kcratr_nab_less_than_odr], [1], [46], [32689], [32690], [], [], [], [], [], [], [] " please advice me, It's an emergency case. FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# -------------------- ------------- -------------- --------------- ------------- TOP_LEVEL_CALL# LOGON_TIM LAST_CALL_ET PDM FAILOVER_TYPE FAILOVER_M FAI --------------- --------- ------------ --- ------------- ---------- --- RESOURCE_CONSUMER_GROUP PDML_STA PDDL_STA PQ_STATU -------------------------------- -------- -------- -------- CURRENT_QUEUE_DURATION ---------------------- CLIENT_IDENTIFIER BLOCKING_SE ---------------------------------------------------------------- ----------- BLOCKING_INSTANCE BLOCKING_SESSION FINAL_BLOCK FINAL_BLOCKING_INSTANCE ----------------- ---------------- ----------- ----------------------- FINAL_BLOCKING_SESSION SEQ# EVENT# ---------------------- ---------- ---------- EVENT ---------------------------------------------------------------- P1TEXT P1 ---------------------------------------------------------------- ---------- P1RAW ---------------- P2TEXT P2 ---------------------------------------------------------------- ---------- P2RAW ---------------- P3TEXT P3 ---------------------------------------------------------------- ---------- P3RAW WAIT_CLASS_ID WAIT_CLASS# ---------------- ------------- ----------- WAIT_CLASS WAIT_TIME ---------------------------------------------------------------- ---------- SECONDS_IN_WAIT STATE WAIT_TIME_MICRO TIME_REMAINING_MICRO --------------- ------------------- --------------- -------------------- TIME_SINCE_LAST_WAIT_MICRO -------------------------- SERVICE_NAME SQL_TRAC SQL_T ---------------------------------------------------------------- -------- ----- SQL_T SQL_TRACE_ SESSION_EDITION_ID CREATOR_ADDR CREATOR_SERIAL# ----- ---------- ------------------ ---------------- --------------- ECID ---------------------------------------------------------------- SYS$USERS DISABLED FALSE SADDR SID SERIAL# AUDSID PADDR USER# ---------------- ---------- ---------- ---------- ---------------- ---------- USERNAME COMMAND OWNERID TADDR ------------------------------ ---------- ---------- ---------------- LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME ---------------- -------- --------- ---------- ------------------------------ OSUSER PROCESS ------------------------------ ------------------------ MACHINE PORT ---------------------------------------------------------------- ---------- TERMINAL ---------------- PROGRAM TYPE ---------------------------------------------------------------- ---------- SQL_ADDRESS SQL_HASH_VALUE SQL_ID SQL_CHILD_NUMBER SQL_EXEC_ ---------------- -------------- ------------- ---------------- --------- SQL_EXEC_ID PREV_SQL_ADDR PREV_HASH_VALUE PREV_SQL_ID PREV_CHILD_NUMBER ----------- ---------------- --------------- ------------- ----------------- PREV_EXEC PREV_EXEC_ID PLSQL_ENTRY_OBJECT_ID PLSQL_ENTRY_SUBPROGRAM_ID --------- ------------ --------------------- ------------------------- PLSQL_OBJECT_ID PLSQL_SUBPROGRAM_ID --------------- ------------------- MODULE MODULE_HASH ------------------------------------------------ ----------- ACTION ACTION_HASH -------------------------------- ----------- CLIENT_INFO ---------------------------------------------------------------- FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# -------------------- ------------- -------------- --------------- ------------- TOP_LEVEL_CALL# LOGON_TIM LAST_CALL_ET PDM FAILOVER_TYPE FAILOVER_M FAI --------------- --------- ------------ --- ------------- ---------- --- RESOURCE_CONSUMER_GROUP PDML_STA PDDL_STA PQ_STATU -------------------------------- -------- -------- -------- CURRENT_QUEUE_DURATION ---------------------- CLIENT_IDENTIFIER BLOCKING_SE ---------------------------------------------------------------- ----------- BLOCKING_INSTANCE BLOCKING_SESSION FINAL_BLOCK FINAL_BLOCKING_INSTANCE ----------------- ---------------- ----------- ----------------------- FINAL_BLOCKING_SESSION SEQ# EVENT# ---------------------- ---------- ---------- EVENT ---------------------------------------------------------------- P1TEXT P1 ---------------------------------------------------------------- ---------- P1RAW ---------------- P2TEXT P2 ---------------------------------------------------------------- ---------- P2RAW ---------------- P3TEXT P3 ---------------------------------------------------------------- ---------- P3RAW WAIT_CLASS_ID WAIT_CLASS# ---------------- ------------- ----------- WAIT_CLASS WAIT_TIME ---------------------------------------------------------------- ---------- SECONDS_IN_WAIT STATE WAIT_TIME_MICRO TIME_REMAINING_MICRO --------------- ------------------- --------------- -------------------- TIME_SINCE_LAST_WAIT_MICRO -------------------------- SERVICE_NAME SQL_TRAC SQL_T ---------------------------------------------------------------- -------- ----- SQL_T SQL_TRACE_ SESSION_EDITION_ID CREATOR_ADDR CREATOR_SERIAL# ----- ---------- ------------------ ---------------- --------------- ECID ---------------------------------------------------------------- FALSE FIRST EXEC 0 000007FF5D4D8D70 2 SADDR SID SERIAL# AUDSID PADDR USER# ---------------- ---------- ---------- ---------- ---------------- ---------- USERNAME COMMAND OWNERID TADDR ------------------------------ ---------- ---------- ---------------- LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME ---------------- -------- --------- ---------- ------------------------------ OSUSER PROCESS ------------------------------ ------------------------ MACHINE PORT ---------------------------------------------------------------- ---------- TERMINAL ---------------- PROGRAM TYPE ---------------------------------------------------------------- ---------- SQL_ADDRESS SQL_HASH_VALUE SQL_ID SQL_CHILD_NUMBER SQL_EXEC_ ---------------- -------------- ------------- ---------------- --------- SQL_EXEC_ID PREV_SQL_ADDR PREV_HASH_VALUE PREV_SQL_ID PREV_CHILD_NUMBER ----------- ---------------- --------------- ------------- ----------------- PREV_EXEC PREV_EXEC_ID PLSQL_ENTRY_OBJECT_ID PLSQL_ENTRY_SUBPROGRAM_ID --------- ------------ --------------------- ------------------------- PLSQL_OBJECT_ID PLSQL_SUBPROGRAM_ID --------------- ------------------- MODULE MODULE_HASH ------------------------------------------------ ----------- ACTION ACTION_HASH -------------------------------- ----------- CLIENT_INFO ---------------------------------------------------------------- FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# -------------------- ------------- -------------- --------------- ------------- TOP_LEVEL_CALL# LOGON_TIM LAST_CALL_ET PDM FAILOVER_TYPE FAILOVER_M FAI --------------- --------- ------------ --- ------------- ---------- --- RESOURCE_CONSUMER_GROUP PDML_STA PDDL_STA PQ_STATU -------------------------------- -------- -------- -------- CURRENT_QUEUE_DURATION ---------------------- CLIENT_IDENTIFIER BLOCKING_SE ---------------------------------------------------------------- ----------- BLOCKING_INSTANCE BLOCKING_SESSION FINAL_BLOCK FINAL_BLOCKING_INSTANCE ----------------- ---------------- ----------- ----------------------- FINAL_BLOCKING_SESSION SEQ# EVENT# ---------------------- ---------- ---------- EVENT ---------------------------------------------------------------- P1TEXT P1 ---------------------------------------------------------------- ---------- P1RAW ---------------- P2TEXT P2 ---------------------------------------------------------------- ---------- P2RAW ---------------- P3TEXT P3 ---------------------------------------------------------------- ---------- P3RAW WAIT_CLASS_ID WAIT_CLASS# ---------------- ------------- ----------- WAIT_CLASS WAIT_TIME ---------------------------------------------------------------- ---------- SECONDS_IN_WAIT STATE WAIT_TIME_MICRO TIME_REMAINING_MICRO --------------- ------------------- --------------- -------------------- TIME_SINCE_LAST_WAIT_MICRO -------------------------- SERVICE_NAME SQL_TRAC SQL_T ---------------------------------------------------------------- -------- ----- SQL_T SQL_TRACE_ SESSION_EDITION_ID CREATOR_ADDR CREATOR_SERIAL# ----- ---------- ------------------ ---------------- --------------- ECID ---------------------------------------------------------------- SADDR SID SERIAL# AUDSID PADDR USER# ---------------- ---------- ---------- ---------- ---------------- ---------- USERNAME COMMAND OWNERID TADDR ------------------------------ ---------- ---------- ---------------- LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME ---------------- -------- --------- ---------- ------------------------------ OSUSER PROCESS ------------------------------ ------------------------ MACHINE PORT ---------------------------------------------------------------- ---------- TERMINAL ---------------- PROGRAM TYPE ---------------------------------------------------------------- ---------- SQL_ADDRESS SQL_HASH_VALUE SQL_ID SQL_CHILD_NUMBER SQL_EXEC_ ---------------- -------------- ------------- ---------------- --------- SQL_EXEC_ID PREV_SQL_ADDR PREV_HASH_VALUE PREV_SQL_ID PREV_CHILD_NUMBER ----------- ---------------- --------------- ------------- ----------------- PREV_EXEC PREV_EXEC_ID PLSQL_ENTRY_OBJECT_ID PLSQL_ENTRY_SUBPROGRAM_ID --------- ------------ --------------------- ------------------------- PLSQL_OBJECT_ID PLSQL_SUBPROGRAM_ID --------------- ------------------- MODULE MODULE_HASH ------------------------------------------------ ----------- ACTION ACTION_HASH -------------------------------- ----------- CLIENT_INFO ---------------------------------------------------------------- FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# -------------------- ------------- -------------- --------------- ------------- TOP_LEVEL_CALL# LOGON_TIM LAST_CALL_ET PDM FAILOVER_TYPE FAILOVER_M FAI --------------- --------- ------------ --- ------------- ---------- --- RESOURCE_CONSUMER_GROUP PDML_STA PDDL_STA PQ_STATU -------------------------------- -------- -------- -------- CURRENT_QUEUE_DURATION ---------------------- CLIENT_IDENTIFIER BLOCKING_SE ---------------------------------------------------------------- ----------- BLOCKING_INSTANCE BLOCKING_SESSION FINAL_BLOCK FINAL_BLOCKING_INSTANCE ----------------- ---------------- ----------- ----------------------- FINAL_BLOCKING_SESSION SEQ# EVENT# ---------------------- ---------- ---------- EVENT ---------------------------------------------------------------- P1TEXT P1 ---------------------------------------------------------------- ---------- P1RAW ---------------- P2TEXT P2 ---------------------------------------------------------------- ---------- P2RAW ---------------- P3TEXT P3 ---------------------------------------------------------------- ---------- P3RAW WAIT_CLASS_ID WAIT_CLASS# ---------------- ------------- ----------- WAIT_CLASS WAIT_TIME ---------------------------------------------------------------- ---------- SECONDS_IN_WAIT STATE WAIT_TIME_MICRO TIME_REMAINING_MICRO --------------- ------------------- --------------- -------------------- TIME_SINCE_LAST_WAIT_MICRO -------------------------- SERVICE_NAME SQL_TRAC SQL_T ---------------------------------------------------------------- -------- ----- SQL_T SQL_TRACE_ SESSION_EDITION_ID CREATOR_ADDR CREATOR_SERIAL# ----- ---------- ------------------ ---------------- --------------- ECID ---------------------------------------------------------------- 16 rows selected. SQL> desc dba_user; ERROR: ORA-04043: object dba_user does not exist SQL> desc dba_users; ERROR: ORA-04043: object dba_users does not exist SQL> desc v$user; ERROR: ORA-04043: object v$user does not exist SQL> desc v$users ERROR: ORA-04043: object v$users does not exist SQL> seleect * from dba_users; SP2-0734: unknown command beginning "seleect * ..." - rest of line ignored. SQL> select * from dba_users; select * from dba_users * ERROR at line 1: ORA-01219: database not open: queries allowed on fixed tables/views only SQL> alter database open; alter database open * ERROR at line 1: ORA-00600: internal error code, arguments: [kcratr_nab_less_than_odr], [1], [46], [32689], [32690], [], [], [], [], [], [], [] SQL> alter database mount; alter database mount * ERROR at line 1: ORA-01100: database already mounted SQL> alter database mount;

  Read the article

• overriding new ubuntu installation

  - by tkoomzaaskz

  I've got a ubuntu 11.10 which has lost its support in May 2013, now I'd like to reintall up to the most up-to-date LTS, which is 12.04. My question is regarding my current partitions and doing backups. Is there a safe way to backup my data on some local partitions instead of copying files into DVDs/external drives (this is very uncormortable in my situation). Following are system commands shoing my disk: $ lsblk NAME MAJ:MIN RM SIZE RO MOUNTPOINT sda 8:0 0 232,9G 0 +-sda1 8:1 0 48,8G 0 +-sda2 8:2 0 63G 0 +-sda3 8:3 0 1K 0 +-sda4 8:4 0 53,7G 0 / +-sda5 8:5 0 18,6G 0 +-sda6 8:6 0 25,5G 0 +-sda7 8:7 0 23,3G 0 [SWAP] sr0 11:0 1 1024M 0 and $ sudo fdisk -l [sudo] password for xyz: Disk /dev/sda: 250.1 GB, 250059350016 bytes glowic: 255, sektorów/sciezke: 63, cylindrów: 30401, w sumie sektorów: 488397168 Jednostka = sektorów, czyli 1 * 512 = 512 bajtów Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512 Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512 Identyfikator dysku: 0xc3ffc3ff Device Boot Beginning End Blocks ID System /dev/sda1 * 2048 102402047 51200000 7 HPFS/NTFS/exFAT /dev/sda2 215044096 347080703 66018304 7 HPFS/NTFS/exFAT /dev/sda3 347082750 488392064 70654657+ 5 Extended /dev/sda4 102402048 215042047 56320000 83 Linux /dev/sda5 395905923 434975939 19535008+ 83 Linux /dev/sda6 434976003 488392064 26708031 83 Linux /dev/sda7 347082752 395905023 24411136 82 Linux swap / Solaris In the beginning I had Windows Vista pre-installed with the machine when it was bought (damn!) and I installed linux (the one I have now). The windows-program in master boot record has been overriden by grub and now I can boot with both Windows and Linux. This is list of mounted devices: $ mount /dev/sda4 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/tomasz/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tomasz) It's strange (I don't remember such thing) that my current linux uses only one partition (/dev/sda4). But, anyway, it seems like that. My final question is: am I able to use one of the existing linux partitions for a backup and install ubuntu 12.04 without removing neither windows nor ubuntu 11.04? I mean - will grub automatically accept both old windows vista and 2 linuxes (old 11.10 and "new" 12.04)? Is there any hidden operation done while installation that could harm my custom-backup-partition while installing? my fstab file: proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=d44e89f5-9da2-48eb-83b3-887652ec95d2 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=bbe50535-ba57-434a-9272-211d859f0e00 none swap sw 0 0 sda5 and sda6 are trash partitions created during unsuccessful linux installation (this was linux installation before my current installation), I didn't delete these partitions, but I have access to them (and I can use them as backup partitions). edit: second question is: why does lsblk show /dev/sda having 232,9G while fdisk shows that it has 250.1GB? Where does the difference come from?

  Read the article

• Call to daemon in a /etc/init.d script is blocking, not running in background

  - by tony

  I have a Perl script that I want to daemonize. Basically this perl script will read a directory every 30 seconds, read the files that it finds and then process the data. To keep it simple here consider the following Perl script (called synpipe_server, there is a symbolic link of this script in /usr/sbin/) : #!/usr/bin/perl use strict; use warnings; my $continue = 1; $SIG{'TERM'} = sub { $continue = 0; print "Caught TERM signal\n"; }; $SIG{'INT'} = sub { $continue = 0; print "Caught INT signal\n"; }; my $i = 0; while ($continue) { #do stuff print "Hello, I am running " . ++$i . "\n"; sleep 3; } So this script basically prints something every 3 seconds. Then, as I want to daemonize this script, I've also put this bash script (also called synpipe_server) in /etc/init.d/ : #!/bin/bash # synpipe_server : This starts and stops synpipe_server # # chkconfig: 12345 12 88 # description: Monitors all production pipelines # processname: synpipe_server # pidfile: /var/run/synpipe_server.pid # Source function library. . /etc/rc.d/init.d/functions pname="synpipe_server" exe="/usr/sbin/synpipe_server" pidfile="/var/run/${pname}.pid" lockfile="/var/lock/subsys/${pname}" [ -x $exe ] || exit 0 RETVAL=0 start() { echo -n "Starting $pname : " daemon ${exe} RETVAL=$? PID=$! echo [ $RETVAL -eq 0 ] && touch ${lockfile} echo $PID > ${pidfile} } stop() { echo -n "Shutting down $pname : " killproc ${exe} RETVAL=$? echo if [ $RETVAL -eq 0 ]; then rm -f ${lockfile} rm -f ${pidfile} fi } restart() { echo -n "Restarting $pname : " stop sleep 2 start } case "$1" in start) start ;; stop) stop ;; status) status ${pname} ;; restart) restart ;; *) echo "Usage: $0 {start|stop|status|restart}" ;; esac exit 0 So, (if I have well understood the doc for daemon) the Perl script should run in the background and the output should be redirected to /dev/null if I execute : service synpipe_server start But here is what I get instead : [root@master init.d]# service synpipe_server start Starting synpipe_server : Hello, I am running 1 Hello, I am running 2 Hello, I am running 3 Hello, I am running 4 Caught INT signal [ OK ] [root@master init.d]# So it starts the Perl script but runs it without detaching it from the current terminal session, and I can see the output printed in my console ... which is not really what I was expecting. Moreover, the PID file is empty (or with a line feed only, no pid returned by daemon). Does anyone have any idea of what I am doing wrong ? EDIT : maybe I should say that I am on a Red Hat machine. Scientific Linux SL release 5.4 (Boron) Would it do the job if instead of using the daemon function, I use something like : nohup ${exe} >/dev/null 2>&1 & in the init script ?

  Read the article

• How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• Setting up VPN client: L2TP with IPsec

  - by zachar

  I've got to connect to vpn server. It works on Windows, but in Ubuntu 10.04 not. Number of options is confusing for me. There is the input that I have: IP Address of VPN Pre-shared key to authenticate Information that MS-CHAPv2 is used Login and Password to VPN I was trying to achive that with network manager and with L2TP IPsec VPN Manager 1.0.9 but at failed. There is some logged information from L2TP IPsec VPN Manager 1.0.9: Nov 09 15:21:46.854 ipsec_setup: Stopping Openswan IPsec... Nov 09 15:21:48.088 Stopping xl2tpd: xl2tpd. Nov 09 15:21:48.132 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 09 15:21:48.308 ipsec__plutorun: Starting Pluto subsystem... Nov 09 15:21:48.318 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 09 15:21:48.338 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 09 15:21:48.348 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 09 15:21:48.349 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 09 15:21:48.994 104 "my_vpn_name" #1: STATE_MAIN_I1: initiate Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [RFC 3947] method set to=109 Nov 09 15:21:48.994 003 "my_vpn_name" #1: received Vendor ID payload [Dead Peer Detection] Nov 09 15:21:48.994 106 "my_vpn_name" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Nov 09 15:21:48.994 003 "my_vpn_name" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Nov 09 15:21:48.994 108 "my_vpn_name" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Nov 09 15:21:48.994 004 "my_vpn_name" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Nov 09 15:21:48.995 117 "my_vpn_name" #2: STATE_QUICK_I1: initiate Nov 09 15:21:48.995 004 "my_vpn_name" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0c96795d <0x483e1a42 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Nov 09 15:21:49.996 [ERROR 210] Failed to open l2tp control file 'c my_vpn_name' and from syslog: Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:46 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup stop Nov 9 15:21:46 o99 ipsec_setup: Stopping Openswan IPsec... Nov 9 15:21:48 o99 kernel: [ 4350.245171] NET: Unregistered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec stopped Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd stop Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd stop finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Opening client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Closing client connection Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec setup start Nov 9 15:21:48 o99 kernel: [ 4350.312483] NET: Registered protocol family 15 Nov 9 15:21:48 o99 ipsec_setup: Starting Openswan IPsec U2.6.23/K2.6.32-49-generic... Nov 9 15:21:48 o99 ipsec_setup: Using NETKEY(XFRM) stack Nov 9 15:21:48 o99 kernel: [ 4350.410774] Initializing XFRM netlink socket Nov 9 15:21:48 o99 kernel: [ 4350.413601] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 kernel: [ 4350.427311] padlock: VIA PadLock Hash Engine not detected. Nov 9 15:21:48 o99 kernel: [ 4350.441533] padlock: VIA PadLock not detected. Nov 9 15:21:48 o99 ipsec_setup: ...Openswan IPsec started Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec setup start finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command invoke-rc.d xl2tpd start Nov 9 15:21:48 o99 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 pluto: adjusting ipsec.d to /etc/ipsec.d Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command invoke-rc.d xl2tpd start finished with exit code 0 Nov 9 15:21:48 o99 ipsec__plutorun: 002 added connection description "my_vpn_name" Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --ready Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying new style NAT-T Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Nov 9 15:21:48 o99 ipsec__plutorun: 003 NAT-Traversal: Trying old style NAT-T Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --ready finished with exit code 0 Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Executing command ipsec auto --up my_vpn_name Nov 9 15:21:48 o99 L2tpIPsecVpnControlDaemon: Command ipsec auto --up my_vpn_name finished with exit code 0 Nov 9 15:21:49 o99 L2tpIPsecVpnControlDaemon: Closing client connection Can anyone tell me something more about that? Where is the mistake?

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• vagrant fails to bring up additional adapter for centos vm using virtual box provider

  - by Anadi Misra

  this is in continuation of the question asked here about host only adapter on dhcp I upgraded to vagrant 1.6.3 and the updated Vagrantfile to following setting for multiple adapters # add additional adapter for inter machine networking dev.vm.network :private_network, :type => "dhcp", :adapter => "2", :netmask => "255.255.255.0" it goes through creating adapters but then fails bringing up the mic on vm Anadis-MacBook-Pro:full-stack-env anadi$ vagrant up Bringing machine 'full-stack-env' up with 'virtualbox' provider... ==> full-stack-env: Clearing any previously set forwarded ports... ==> full-stack-env: Clearing any previously set network interfaces... ==> full-stack-env: Preparing network interfaces based on configuration... full-stack-env: Adapter 1: nat full-stack-env: Adapter 2: hostonly ==> full-stack-env: Forwarding ports... full-stack-env: 22 => 4223 (adapter 1) full-stack-env: 8080 => 8090 (adapter 1) ==> full-stack-env: Running 'pre-boot' VM customizations... ==> full-stack-env: Booting VM... ==> full-stack-env: Waiting for machine to boot. This may take a few minutes... full-stack-env: SSH address: 127.0.0.1:4223 full-stack-env: SSH username: vagrant full-stack-env: SSH auth method: private key full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Remote connection disconnect. Retrying... ==> full-stack-env: Machine booted and ready! ==> full-stack-env: Checking for guest additions in VM... ==> full-stack-env: Setting hostname... ==> full-stack-env: Configuring and enabling network interfaces... The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! ARPCHECK=no /sbin/ifup eth 2> /dev/null Stdout from the command: Device eth does not seem to be present, delaying initialization. Stderr from the command: how ever when I log in to the environment I see two network interfaces as expected Anadis-MacBook-Pro:full-stack-env anadi$ vagrant ssh Last login: Wed Jun 4 12:54:47 2014 from 10.0.2.2 [vagrant@full-stack-env ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:BD:39:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:3957/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:511 errors:0 dropped:0 overruns:0 frame:0 TX packets:360 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54574 (53.2 KiB) TX bytes:46675 (45.5 KiB) eth1 Link encap:Ethernet HWaddr 08:00:27:A3:86:C9 inet addr:172.28.128.3 Bcast:172.28.128.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:86c9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1360 (1.3 KiB) TX bytes:894 (894.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) I am bit confused here on why it is trying to add another mic (eth2)? In the VM I used for creating this vagrant box, I had added two NICs already.

  Read the article

• Permission Mystery - apt-get and other system utilities have 000 permissions

  - by emteh

  I'm trying to track down this strange behavoir for years now. Always after installing software-updates the permissions of a lot of system-tools are broken as you can see below. I am reasonable convinced that the machine is not owned by someone else. Regular security updates + grsecurity kernel + pax + daily rkhunter runs. Besides that there is no incentive for an attacker to fiddle in such obvious ways with the system. I installed bastille linux (http://bastille-linux.sourceforge.net/) und tried to deinstall it later, so the problems could be related to that. However I don't see how this can happen in a regular way after updates. System: Ubuntu 10.04, recently updated to Ubuntu 12.04 but the problem persists. Apt-Configuration in /etc/apt/ looks sane to me. But nevertheless - could here be the source of the trouble? DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt || true";}; DPkg::Post-Invoke { "if [ -x /usr/bin/debsums ]; then /usr/bin/debsums -- generate=nocheck -sp /var/cache/apt/archives; fi"; }; // Makes sure that rkhunter file properties database is updated // after each remove or install only APT_AUTOGEN is enabled DPkg::Post-Invoke { "if [ -x /usr/bin/rkhunter ] && grep -qiE '^APT_AUTOGEN=.? (true|yes)' /etc/default/rkhunter; then /usr/share/rkhunter/scripts/rkhupd.sh; fi" } DPkg::Post-Invoke {"if [ -d /var/lib/update-notifier ]; then touch /var/lib/update- notifier/dpkg-run-stamp; fi; if [ -e /var/lib/update-notifier/updates-available ]; then echo > /var/lib/update-notifier/updates-available; fi "; }; Where do these chmod 000 come from? I'm feeling really uneasy with this problem. root@besen:~# find /usr/bin/ -perm 0 -ls 14721496 196 ---------- 1 root root 192592 Oct 15 11:58 /usr/bin/apt-get 14721144 68 ---------- 1 root root 63848 Sep 13 00:29 /usr/bin/gpasswd root@besen:~# find /usr/sbin/ -perm 0 -ls 1727732 92 ---------- 1 root root 86984 Sep 13 00:29 /usr/sbin/usermod 1727727 64 ---------- 1 root root 57640 Sep 13 00:29 /usr/sbin/userdel 1727719 64 ---------- 1 root root 57680 Sep 13 00:29 /usr/sbin/newusers 1727718 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/grpunconv 1727728 48 ---------- 1 root root 47088 Sep 13 00:29 /usr/sbin/groupadd 1727724 32 ---------- 1 root root 29584 Sep 13 00:29 /usr/sbin/pwunconv 19031620 84 ---------- 1 root root 81880 Jan 3 2012 /usr/sbin/edquota 14877113 48 ---------- 1 root root 46880 Sep 13 00:29 /usr/sbin/grpck 1727722 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/pwck 1727730 96 ---------- 1 root root 91464 Sep 13 00:29 /usr/sbin/useradd 19031619 16 ---------- 1 root root 14600 Jan 3 2012 /usr/sbin/quotastats 1727720 44 ---------- 1 root root 42760 Sep 13 00:29 /usr/sbin/groupdel 1727733 36 ---------- 1 root root 34504 Sep 13 00:29 /usr/sbin/pwconv 19031621 80 ---------- 1 root root 77632 Jan 3 2012 /usr/sbin/rpc.rquotad 19030041 76 ---------- 1 root root 73600 Jan 3 2012 /usr/sbin/repquota 1727731 40 ---------- 1 root root 38624 Sep 13 00:29 /usr/sbin/grpconv 1727725 56 ---------- 1 root root 49472 Sep 13 00:29 /usr/sbin/vipw 1727723 64 ---------- 1 root root 57672 Sep 13 00:29 /usr/sbin/groupmod root@besen:~# find /sbin/ -perm 0 -ls 16760927 76 ---------- 1 root root 73464 Jan 3 2012 /sbin/quotaon Any tipps? I really can't pinpoint the problem in more detail. It happens after installing updates but I can't find no hooks in the dpkg/apt system.

  Read the article

• VPS 512 MB RAM with WordPressMU comes to consumes lots of memory

  - by CAPitalZ

  I have googled for days and gathered all optimization suggestions and tried. My sites are not getting any high hits. May be like 100 hits per day [all my sites combined]. Here are my specs I have 512 MB RAM VPS with burstable 1024 MB. Centos 5 32-bit & cPanel/WHM Apache 2.2 MySQL 5.0 PHP 5.3.2 Here is my Configs I have 2 WordPressMU production sites, and 1 test site my.cnf # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/lib/mysql/mysql.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking skip-bdb skip-innodb key_buffer = 16M max_allowed_packet = 1M table_cache = 64 sort_buffer_size = 512K net_buffer_length = 8K read_buffer_size = 256K read_rnd_buffer_size = 512K myisam_sort_buffer_size = 8M #CAPitalZ thread_cache_size=8 thread_concurrency=4 #query_cache_type=1 #query_cache_limit=1M query_cache_size=16M concurrent_insert=2 low_priority_updates=1 max_connections=50 tmp_table_size=16M max_heap_table_size=16M join_buffer_size=1M interactive_timeout=25 wait_timeout=1000 #connect_timout=10 not able to restart mysql max_connect_errors=10 # Don't listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (via the "enable-named-pipe" option) will render mysqld useless! # skip-networking # Disable Federated by default skip-federated # Replication Master Server (default) # binary logging is required for replication log-bin=mysql-bin # required unique id between 1 and 2^32 - 1 # defaults to 1 if master-host is not set # but will not function as a master if omitted server-id = 1 [mysqld_safe] open_files_limit=8192 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 20M sort_buffer_size = 20M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout httpd.conf I have unselected many modules and recompiled using EasyApache in WHM. Only have the following modules built Deflate Expires Fileprotect Imagemap MPM Prefork Version [default] EAccelerator for PHP Bcmath Calendar CurlSSL [I'm using Curl. But I don't have any https sites] Expat GD [for image cropping] Gettext Imap Mbregex [default] Mbstring [need both Mbregex and Mbstring for utf-8] Mysql of the system MySQL "Improved" extension. Sockets TTF (FreeType) [I'm using custom font] Zlib Under Global Configuration I only have FollowSymLinks enabled I Have TraceEnable, ServerSignature, FileETag OFF ServerTokens ProductOnly DirectoryIndex Priority has index.php as the first one I have removed Clamd [Clam Anti-virus] SpamAssasin is Off Under Tweak Settings Default catch-all/default address behavior for new accounts. This is set to "fail" All stats programs turned off I have eAccelerator installed and checked in phpinfo and its working [Pre VirtualHost Include under WHM] Timeout 20 KeepAlive On MaxKeepAliveRequests 200 KeepAliveTimeout 3 MinSpareServers 1 MaxSpareServers 3 StartServers 1 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 4000 ExtendedStatus Off #ServerType standalone this throws error HostnameLookups Off <Directory "/"> AllowOverride None </Directory> My sites will take ages to load and WHM/CPanel will not even load. adadaa.com/ http://adadaa.net/ kadais.ca/ My average memory consumption is like 1000 MB! [yes always bursting] The process that consumes most CPU and also most memory is mysql But I also get like 15 httpd processes [when its bursting] I already got warning from cpuwatchcheck saying "While processing, the cpu has been maxed out for more than a 6 hour period. The current load/uptime line on the server at the time of this email is 07:00:37 up 11:30, 0 users, load average: 14.64, 16.79, 20.07" I don't know, I have tried switching these config values many different times, but nothing seems to work. Please show some light... Thanks

  Read the article

• IPv6: Should I have private addresses?

  - by AlReece45

  Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

  Read the article

• Looking for advice on Hyper-v storage replication

  - by Notre1

  I am designing a 2-host Hyper-V R2 cluster with 6-10 guests stored on a SMB iSCSI SAN device (probably Promise VessRAID). I will be getting at least two of the SAN devices and need to eliminate the storage a single point of failure. Ideally, that would involve real-time failover for the storage, like the Windows failover clustering does for the hosts. This design will be used at around six of our sites, and I would like to allow for us to eventually setup a cluster at colocation site and replicate each site's VMs there for DR. (Ideally a live multi-site cluster, but a manual import of the VMs would be fine for this sort of DR.) The tools that come with enterprise SANs, like EMC and NetApp, seem to be the most commonly used items for a Hyper-V cluster, but I can't afford their prices with my budget. Outside of them, the two tools that seem to be most common for Hyper-V storage replication are SteelEye (now SIOS) DataKeeper Cluster Edition and Double-Take Availability. Originally, I was planning on using Clustered Shared Volume(s) (CSV), but it seems like replication support for these is either not available or brand new in both these products. It looks like CSVs are supported in Double-Take 5.22, see this discussion, but I don't think I want to run something that new in production. Right now, it seems like the best option for me is not to implement CSVs, implement some sort of storage replication, and upgrade to CSVs at a later date once replicating them is more mature. I would love to have live migration, and CSVs are not required for live migration if you are using one LUN per VM, so I guess this is what I'll do. I would prefer to stick to the using the Microsoft Windows Server and Hyper-V tools and features as much as possible. From that standpoint, SteelEye looks more appealing than Double-Take because they make the DataKeeper volume(s) available to the Failover Clustering Manager and then failover clustering is all configured and managed through the native Microsoft tools. Double-Take says that "clustered Hyper-V hosts are not supported," and Double-Take Availability itself seems to be what is used for the actual clustering and failover. Does anyone know if any of these replication tools work with more than two hosts in the cluster? All the information I can find on the web only uses two hosts in their examples. Are there any better tools than SteelEye and Double-Take for doing what I am trying to do, which is eliminate the storage as as single point of failure? Neverfail, AppAssure, and DataCore all seem to offer similar functionality, but they don't seems to be as popular as SteelEye and Double-Take. I have seen a number of people suggest using Starwind iSCSI SAN software for the shared storage, which includes replication (and CSV replication at that). There are a couple of reasons I have not seriously considered this route: 1) The company I work for is exclusively a Dell shop and Dell does not have any servers with that I can pack with more than six 3.5" SATA drives. 2) In the future, it could be advantegous for us to not be locked into a particular brand or type of storage and third-party replication softwares all allow replication to heterogeneous storage devices. I am pretty new to iSCSI and clustering, so please let me know if it looks like I am planning something that goes against best practices or overlooking/missing something.

  Read the article

• nconf nagios config no services defined

  - by user1508056

  I've setup Nagios core on OSX 10.7 server via macports fine. It seems to load fine and the sample config files all copied over to /opt/local/etc/nagios/objects/ fine and are specified correctly in the nagios.cfg file. I then installed nconf manually and got it running without much fight. Then I clicked on "Generate Nagios config" in nconf and get 1 warning and 4 errors. When I expand the error box here what I see: Nagios Core 3.5.0 Copyright (c) 2009-2011 Nagios Core Development Team and Community Contributors Copyright (c) 1999-2009 Ethan Galstad Last Modified: 03-15-2013 License: GPL Website: http://www.nagios.org Reading configuration data... Read main config file okay... Read object config files okay... Running pre-flight check on configuration data... Checking services... Error: There are no services defined! Checked 0 services. Checking hosts... Error: There are no hosts defined! Checked 0 hosts. Checking host groups... Checked 0 host groups. Checking service groups... Checked 0 service groups. Checking contacts... Error: There are no contacts defined! Checked 0 contacts. Checking contact groups... Checked 0 contact groups. Checking service escalations... Checked 0 service escalations. Checking service dependencies... Checked 0 service dependencies. Checking host escalations... Checked 0 host escalations. Checking host dependencies... Checked 0 host dependencies. Checking commands... Checked 0 commands. Checking time periods... Checked 0 time periods. Checking for circular paths between hosts... Checking for circular host and service dependencies... Checking global event handlers... Checking obsessive compulsive processor commands... Checking misc settings... Warning: Nothing specified for illegal_macro_output_chars variable! Total Warnings: 1 Total Errors: 3 I've tried several different things (played with cache settings, changed file permissions/ownership, edited some config files manually, etc.) but nothing gets me past this step. The thing is, when I run 'sudo nagios -v /opt/local/etc/nagios/nagios.cfg' the output shows it is reading a number of services, a localhost, and a contact in the .cfg files...so I'm pretty confident those are ok and the problem is nconf isnt reading the correct .cfg files or something like that. Any ideas what to double check? I did lots of googling and found nothing on this specific issue--so either I'm special (I'm not) or am overlooking something really simple. The path to nagios binary is listed as /opt/local/bin/nagios, if that matters. Also, all the nagios files are owned by nagios:nagios, wheras nconf files are owned by user, with only the directories/files specified in the nconf docs belonging to the _www user and/or group (things like output, temp, config, etc.). Thanks.

  Read the article

• linux raid 1: right after replacing and syncing one drive, the other disk fails - understanding what is going on with mdstat/mdadm

  - by devicerandom

  We have an old RAID 1 Linux server (Ubuntu Lucid 10.04), with four partitions. A few days ago /dev/sdb failed, and today we noticed /dev/sda had pre-failure ominous SMART signs (~4000 reallocated sector count). We replaced /dev/sdb this morning and rebuilt the RAID on the new drive, following this guide: http://www.howtoforge.com/replacing_hard_disks_in_a_raid1_array Everything went smooth until the very end. When it looked like it was finishing to synchronize the last partition, the other old one failed. At this point I am very unsure of the state of the system. Everything seems working and the files seem to be all accessible, just as if it synchronized everything, but I'm new to RAID and I'm worried about what is going on. The /proc/mdstat output is: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sdb4[2](S) sda4[0] 478713792 blocks [2/1] [U_] md2 : active raid1 sdb3[1] sda3[2](F) 244140992 blocks [2/1] [_U] md1 : active raid1 sdb2[1] sda2[2](F) 244140992 blocks [2/1] [_U] md0 : active raid1 sdb1[1] sda1[2](F) 9764800 blocks [2/1] [_U] unused devices: <none> The order of [_U] vs [U_]. Why aren't they consistent along all the array? Is the first U /dev/sda or /dev/sdb? (I tried looking on the web for this trivial information but I found no explicit indication) If I read correctly for md0, [_U] should be /dev/sda1 (down) and /dev/sdb1 (up). But if /dev/sda has failed, how can it be the opposite for md3 ? I understand /dev/sdb4 is now spare because probably it failed to synchronize it 100%, but why does it show /dev/sda4 as up? Shouldn't it be [__]? Or [_U] anyway? The /dev/sda drive now cannot even be accessed by SMART anymore apparently, so I wouldn't expect it to be up. What is wrong with my interpretation of the output? I attach also the outputs of mdadm --detail for the four partitions: /dev/md0: Version : 00.90 Creation Time : Fri Jan 21 18:43:07 2011 Raid Level : raid1 Array Size : 9764800 (9.31 GiB 10.00 GB) Used Dev Size : 9764800 (9.31 GiB 10.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:27:33 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : a3b4dbbd:859bf7f2:bde36644:fcef85e2 Events : 0.7704 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 1 - faulty spare /dev/sda1 /dev/md1: Version : 00.90 Creation Time : Fri Jan 21 18:43:15 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:39:06 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 8bcd5765:90dc93d5:cc70849c:224ced45 Events : 0.1508280 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 18 1 active sync /dev/sdb2 2 8 2 - faulty spare /dev/sda2 /dev/md2: Version : 00.90 Creation Time : Fri Jan 21 18:43:19 2011 Raid Level : raid1 Array Size : 244140992 (232.83 GiB 250.00 GB) Used Dev Size : 244140992 (232.83 GiB 250.00 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:46:44 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 UUID : 2885668b:881cafed:b8275ae8:16bc7171 Events : 0.2289636 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - faulty spare /dev/sda3 /dev/md3: Version : 00.90 Creation Time : Fri Jan 21 18:43:22 2011 Raid Level : raid1 Array Size : 478713792 (456.54 GiB 490.20 GB) Used Dev Size : 478713792 (456.54 GiB 490.20 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 3 Persistence : Superblock is persistent Update Time : Tue Nov 5 17:19:20 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Number Major Minor RaidDevice State 0 8 4 0 active sync /dev/sda4 1 0 0 1 removed 2 8 20 - spare /dev/sdb4 The active sync on /dev/sda4 baffles me. I am worried because if tomorrow morning I have to replace /dev/sda, I want to be sure what should I sync with what and what is going on. I am also quite baffled by the fact /dev/sda decided to fail exactly when the raid finished resyncing. I'd like to understand what is really happening. Thanks a lot for your patience and help. Massimo

  Read the article

• Distributed and/or Parallel SSIS processing

  - by Jeff

  Background: Our company hosts SaaS DSS applications, where clients provide us data Daily and/or Weekly, which we process & merge into their existing database. During business hours, load in the servers are pretty minimal as it's mostly users running simple pre-defined queries via the website, or running drill-through reports that mostly hit the SSAS OLAP cube. I manage the IT Operations Team, and so far this has presented an interesting "scaling" issue for us. For our daily-refreshed clients, the server is only "busy" for about 4-6 hrs at night. For our weekly-refresh clients, the server is only "busy" for maybe 8-10 hrs per week! We've done our best to use some simple methods of distributing the load by spreading the daily clients evenly among the servers such that we're not trying to process daily clients back-to-back over night. But long-term this scaling strategy creates two notable issues. First, it's going to consume a pretty immense amount of hardware that sits idle for large periods of time. Second, it takes significant Production Support over-head to basically "schedule" the ETL such that they don't over-lap, and move clients/schedules around if they out-grow the resources on a particular server or allocated time-slot. As the title would imply, one option we've tried is running multiple SSIS packages in parallel, but in most cases this has yielded VERY inconsistent results. The most common failures are DTExec, SQL, and SSAS fighting for physical memory and throwing out-of-memory errors, and ETLs running 3,4,5x longer than expected. So from my practical experience thus far, it seems like running multiple ETL packages on the same hardware isn't a good idea, but I can't be the first person that doesn't want to scale multiple ETLs around manual scheduling, and sequential processing. One option we've considered is virtualizing the servers, which obviously doesn't give you any additional resources, but moves the resource contention onto the hypervisor, which (from my experience) seems to manage simultaneous CPU/RAM/Disk I/O a little more gracefully than letting DTExec, SQL, and SSAS battle it out within Windows. Question to the forum: So my question to the forum is, are we missing something obvious here? Are there tools out there that can help manage running multiple SSIS packages on the same hardware? Would it be more "efficient" in terms of parallel execution if instead of running DTExec, SQL, and SSAS same machine (with every machine running that configuration), we run in pairs of three machines with SSIS running on one machine, SQL on another, and SSAS on a third? Obviously that would only make sense if we could process more than the three ETL we were able to process on the machine independently. Another option we've considered is completely re-architecting our SSIS package to have one "master" package for all clients that attempts to intelligently chose a server based off how "busy" it already is in terms of CPU/Memory/Disk utilization, but that would be a herculean effort, and seems like we're trying to reinvent something that you would think someone would sell (although I haven't had any luck finding it). So in summary, are we missing an obvious solution for this, and does anyone know if any tools (for free or for purchase, doesn't matter) that facilitate running multiple SSIS ETL packages in parallel and on multiple servers? (What I would call a "queue & node based" system, but that's not an official term). Ultimately VMWare's Distributed Resource Scheduler addresses this as you simply run a consistent number of clients per VM that you know will never conflict scheduleing-wise, then leave it up to VMWare to move the VMs around to balance out hardware usage. I'm definitely not against using VMWare to do this, but since we're a 100% Microsoft app stack, it seems like -someone- out there would have solved this problem at the application layer instead of the hypervisor layer by checking on resource utilization at the OS, SQL, SSAS levels. I'm open to ANY discussion on this, and remember no suggestion is too crazy or radical! :-) Right now, VMWare is the only option we've found to get away from "manually" balancing our resources, so any suggestions that leave us on a pure Microsoft stack would be great. Thanks guys, Jeff

  Read the article

• Backup, Migrate or Clone Failing CentOS 4 (LVM)

  - by Hegelworm

  I've been running a BlueQuartz CentOS 4 system (Nuonce.net distro) for a few years now and although the hard drive (Deskstar) has always been a bit noisy, on a few recent occasions I've heard it having trouble spinning up. Basically, I want to clone this drive to a similar sized one (80 Gig). I've spent many hours reading upon dd, dd_rescue, rsync, clonezilla and LVM mirroring yet the sheer number of options and nightmarish accounts has left me frozen - unable to make an informed decision as to how to start. I've made a few attempts. dd failed after about 2 hours, as, although the drives appeared to be identical on the surface (ATA Seagate Barracudas, Thai not Chinese), the destination drive is slightly smaller. My most recent attempt involved using a Debian CD to format the new drive and then rsync-ing everything over and editing the new drive's grub and fstab to reflect the changes. No joy here either as I hadn't chosen LVM when partitioning the destination drive and it wouldn't boot. As you can probably tell, I'm out of my depth here and a panic-invoking mixture of caution and frustration has prompted me to sign up here. The server itself, although not strictly a production environment, has a very specific installation of Festival, LAME and ffMpeg and provides the back-end for a Text-to-Speech jQuery plugin that I've built over the last 2 years. I'm also planning to rebuild the whole TTS system on Debian as the existing CentOS system still has PHP4 etc. For now though, I'd really like to just shift everything over to a new drive. As this is my first post, please feel free to lay any house rules on me that I might've overlooked; I've been hovering around StackOverflow for a while now but have only just signed up. Many thanks. Update: Thanks for your responses so far - it's much appreciated and makes me feel a little more confident when I can double-check things here. I had the idea of doing a fresh install of CentOS (from the original disk) on the new drive so the partitions and LVM were all set up correctly (after disconnecting my source drive to prevent painful mistakes). I then booted into rescue mode from the same CD, and, to avoid a conflicting label, changed the /boot partition's label using e2label to /bootnew. I then changed the VolGroup name using lvm vgrename from VolGroup00 to VolGroup001. I could then boot with both drives in. After mounting the new drive (via its VolGroup001 alias) into /newhd, I rsync-ed over everything I could to the new drive, using -avr switches and backslashes. Like mentioned here. I then disconnected my original source drive again, booted from the liveCD again, changed back the boot partition label from /bootnew to /boot using e2label and then renamed the VolGroup back to VolGroup00. I then rebooted and it went through the familiar start-up routine only to not find a host of files in proc, usr, lib, var etc. The boot did complete but there were lots of red 'FAILS'. I could log in with my existing creds, but the network was kaput, I couldn't startX (desktop GUI) and there were also a few (a lot) of error messages pertaining to iptables. Back to square one. I naively thought I'd nailed it. Shall I just buy a bigger hard drive and attempt the dd route? I've read that this can mess with LVM setups and there's the added risk of working on two unmounted drives at once with a low-level tool. Thanks again.

  Read the article

• How to export SQL Server data from corrupted database (with disk write error)

  - by damitamit

  IT realised there was a disk write error on our production SQL Server 2005 and hence was causing the backups to fail. By the time they had realised this the nightly backup was old, so were not able to just restore the backup on another server. The database is still running and being used constantly. However DBCC CheckDB fails. Also the SQL Server backup task fails, Copy Database fails, Export Data Wizard fails. However it seems all the data can be read from the tables (i.e using bcp etc) Another observation I have made is that the Transaction Log is nearly double the size of the Database. (Does that mean all the changes arent being written to the MDF?) What would be the best plan of attack to get the database to a state where backups are working and the data is safe? Take the database offline and use the MDF/LDF to somehow create the database on another sql server? Export the data from the database using bcp. Create the database (use the Generate Scripts function on the corrupt db to create the schema on the new db) on another sql server and use bcp again to import the data. Some other option that is the right course of action in this situation? The IT manager says the data is safe as if the server fails, the data can be restored from the mdf/ldf. I'm not sure so insisted that we start exporting the data each night as a failsafe (using bcp for example). IT are also having issues on the hardware side of things as supposedly the disk error in on a virtualized disk and can't be rebuilt like a normal raid array (or something like that). Please excuse my use of incorrect terminology and incorrect assumptions on how Sql Server operates. I'm the application developer and have been called to help (as it seems IT know less about SQL Server than I do). Many Thanks, Amit Results of DBBC CheckDB: Msg 1823, Level 16, State 2, Line 1 A database snapshot cannot be created because it failed to start. Msg 7928, Level 16, State 1, Line 1 The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. Msg 5030, Level 16, State 12, Line 1 The database could not be exclusively locked to perform the operation. Msg 7926, Level 16, State 1, Line 1 Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details. Msg 823, Level 24, State 3, Line 1 The operating system returned error 1(error not found) to SQL Server during a write at offset 0x00000674706000 in file 'G:\AX40_Dynamics_Live.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.

  Read the article

• Visual Studio build fails: unable to copy exe-file from obj\debug to bin\debug

  - by Nailuj

  This is a question asked before, both here on Stack Overflow and other places, but none of the suggestions I've found this far has helped me, so I just have to try asking a new question. Scenario: I have a simple Windows Forms application (C#, .NET 4.0, Visual Studio 2010). It has a couple of base forms that most other forms inherit from, it uses Entity Framework (and POCO classes) for database access. Nothing fancy, no multi-threading or anything. Problem: All was fine for a while. Then, all out of the blue, Visual Studio failed to build when I was about to launch the application. I got the warning "Unable to delete file '...bin\Debug\[ProjectName].exe'. Access to the path '...bin\Debug\[ProjectName].exe' is denied." and the error "Unable to copy file 'obj\x86\Debug\[ProjectName].exe' to 'bin\Debug\[ProjectName].exe'. The process cannot access the file 'bin\Debug\[ProjectName].exe' because it is being used by another process." (I get both the warning and the error when running Rebuild, but only the error when running Build - don't think that is relevant?) I understand perfectly fine what the warning and error message says: Visual Studio is obviously trying to overwrite the exe-file while it the same time has a lock on it for some reason. However, this doesn't help me find a solution to the problem... The only thing I've found working is to shut down Visual Studio and start it again. Building and launching then works, untill I make a change in some of the forms, then I have the same problem again and have to restart... Quite frustrating! As I mentioned above, this seems to be a known problem, so there are lots of suggested solutions. I'll just list what I've already tried here, so people know what to skip: Creating a new clean solution and just copy the files from the old solution. Adding the following to the following to the project's pre-build event: if exist "$(TargetPath).locked" del "$(TargetPath).locked"   if not exist "$(TargetPath).locked" if exist "$(TargetPath)" move "$(TargetPath)" "$(TargetPath).locked" Adding the following to the project properties (.csproj file): <GenerateResourceNeverLockTypeAssembliestrue</GenerateResourceNeverLockTypeAssemblies However, none of them worked for me, so you can probably see why I'm starting to get a bit frustrated. I don't know where else to look, so I hope somebody has something to give me! Is this a bug in VS, and if so is there a patch? Or has I done something wrong, do I have a circular reference or similar, and if so how could I find out? Any suggestions are highly appreciated :)

  Read the article

• WPF MVVM Trigger Animation on MainWindow close

  - by Scott

  I'm using trying to implement MVVM in my app. I have a MainWindow.xaml and a MainWindowViewModel. I'm in the process of removing all of the code-behind code from the MainWindow.xaml but I'm stuck on one final piece. In my pre-MVVM setup I started an animation in the MainWindow.xaml.cs that would fade out the form before closing it. Since Closing is not a RoutedEvent, I had to use code-behind to get this to work. My VM has the following two properties that can be bound: ClosingWindow and CloseWindow. My goal was to bind a DataTrigger in my MainWindowStyle to the ClosingWindow property of the VM. When ClosingWindow was set to True, it would start an animation using the following XAML: <DataTrigger Binding="{Binding ClosingWindow}" Value="True"> <DataTrigger.EnterActions> <BeginStoryboard> <Storyboard> <DoubleAnimation Storyboard.TargetProperty="Opacity" From="1" To="0" Duration="0:0:2"/> </Storyboard> </BeginStoryboard> </DataTrigger.EnterActions> </DataTrigger> Somehow (insert magic here) I was going to set CloseWindow on the VM, via Binding, to True when the animation completed, which would then use an AttachedBehavior to Close the Window. The AttachedBehavior works perfectly when I just set CloseWindow directly using the following XAML: <DataTrigger Binding="{Binding CloseWindow}" Value="True"> <Setter Property="ab:WindowCloseBehavior.Close" Value="True"/> </DataTrigger> ...but I want to reproduce the form fade before the form actually closes. So there are two issues that I've run into: First, the animation doesn't work. I enter the trigger correctly (I've taken out the animation and put a Setter statement in there that changes the Title of the MainWindow to "Closing" and it changes correctly when ClosingWindow = True) but the DoubleAnimation never does anything. Second, there's no way to set the value of CloseWindow once the animation is complete. I looked at Marlon Grech's animation code but that won't work on DataTriggers. I can't publish a RoutedEvent because my VM doesn't descend from UIElement, and I've been Googling all day trying to come up with a clever, MVVM-friendly way to do this with no luck. So any ideas why that animation doesn't do anything? And more importantly, how would you solve the entire problem of animating a form fade on close from the VM? I don't doubt that my entire solution to this problem might be whacked so I'm open to just about anything.

  Read the article

• Where is meta.local_fields set in django.db.models.base.py ?

  - by BryanWheelock

  I'm getting the error: Exception Value: (1110, "Column 'about' specified twice") As I was reviewing the Django error page, I noticed that the customizations the model User, seem to be appended to the List twice. This seems to be happening here in django/db/model/base.py in base_save(): values = [(f, f.get_db_prep_save(raw and getattr(self, f.attname) or f.pre_save(self, True))) for f in meta.local_fields] this is what Django error page shows values to be: values = [(<django.db.models.fields.CharField object at 0xa78996c>, u'kallie'), (<django.db.models.fields.CharField object at 0xa7899cc>, ''), (<django.db.models.fields.CharField object at 0xa789a2c>, ''), (<django.db.models.fields.EmailField object at 0xa789a8c>, u'[email protected]'), (<django.db.models.fields.CharField object at 0xa789b2c>, 'sha1$d4a80$0e5xxxxxxxxxxxxxxxxxxxxddadfb07'), (<django.db.models.fields.BooleanField object at 0xa789bcc>, False), (<django.db.models.fields.BooleanField object at 0xa789c6c>, True), (<django.db.models.fields.BooleanField object at 0xa789d2c>, False), (<django.db.models.fields.DateTimeField object at 0xa789dcc>, u'2010-02-03 14:54:35'), (<django.db.models.fields.DateTimeField object at 0xa789e2c>, u'2010-02-03 14:54:35'), # this is where the values from the User model customizations show up (<django.db.models.fields.BooleanField object at 0xa8c69ac>, False), (<django.db.models.fields.CharField object at 0xa8c688c>, None), (<django.db.models.fields.PositiveIntegerField object at 0xa8c69cc>, 1), (<django.db.models.fields.CharField object at 0xa8c69ec>, 'b5ab1603b2308xxxxxxxxxxx75bca1'), (<django.db.models.fields.SmallIntegerField object at 0xa8c6dac>, 0), (<django.db.models.fields.SmallIntegerField object at 0xa8c6e4c>, 0), (<django.db.models.fields.SmallIntegerField object at 0xa8c6e8c>, 0), (<django.db.models.fields.SmallIntegerField object at 0xa8c6ecc>, 10), (<django.db.models.fields.DateTimeField object at 0xa8c6eec>, u'2010-02-03 14:54:35'), (<django.db.models.fields.CharField object at 0xa8c6f2c>, ''), (<django.db.models.fields.URLField object at 0xa8c6f6c>, ''), (<django.db.models.fields.CharField object at 0xa8c6fac>, ''), (<django.db.models.fields.DateField object at 0xa8c6fec>, None), (<django.db.models.fields.TextField object at 0xa8cb04c>, ''), # at this point User model customizations repeats itself (<django.db.models.fields.BooleanField object at 0xa663b0c>, False), (<django.db.models.fields.CharField object at 0xaa1e94c>, None), (<django.db.models.fields.PositiveIntegerField object at 0xaa1e34c>, 1), (<django.db.models.fields.CharField object at 0xaa1e40c>, 'b5ab1603b2308050ebd62f49ca75bca1'), (<django.db.models.fields.SmallIntegerField object at 0xa8c6d8c>, 0), (<django.db.models.fields.SmallIntegerField object at 0xaa2378c>, 0), (<django.db.models.fields.SmallIntegerField object at 0xaa237ac>, 0), (<django.db.models.fields.SmallIntegerField object at 0xaa237ec>, 10), (<django.db.models.fields.DateTimeField object at 0xaa2380c>, u'2010-02-03 14:54:35'), (<django.db.models.fields.CharField object at 0xaa2384c>, ''), (<django.db.models.fields.URLField object at 0xaa2388c>, ''), (<django.db.models.fields.CharField object at 0xaa238cc>, ''), (<django.db.models.fields.DateField object at 0xaa2390c>, None), (<django.db.models.fields.TextField object at 0xaa2394c>, '')] Since this app is in Production, I can't figure out how to use pdb.set_trace() to see what's going on inside of save_base. The customizations to User are: User.add_to_class('email_isvalid', models.BooleanField(default=False)) User.add_to_class('email_key', models.CharField(max_length=16, null=True)) User.add_to_class('reputation', models.PositiveIntegerField(default=1)) User.add_to_class('gravatar', models.CharField(max_length=32)) User.add_to_class('email_feeds', generic.GenericRelation(EmailFeed)) User.add_to_class('favorite_questions', models.ManyToManyField(Question, through=FavoriteQuestion, related_name='favorited_by')) User.add_to_class('badges', models.ManyToManyField(Badge, through=Award, related_name='awarded_to')) User.add_to_class('gold', models.SmallIntegerField(default=0)) User.add_to_class('silver', models.SmallIntegerField(default=0)) User.add_to_class('bronze', models.SmallIntegerField(default=0)) User.add_to_class('questions_per_page', models.SmallIntegerField(choices=QUESTIONS_PER_PAGE_CHOICES, default=10)) User.add_to_class('last_seen', models.DateTimeField(default=datetime.datetime.now)) User.add_to_class('real_name', models.CharField(max_length=100, blank=True)) User.add_to_class('website', models.URLField(max_length=200, blank=True)) User.add_to_class('location', models.CharField(max_length=100, blank=True)) User.add_to_class('date_of_birth', models.DateField(null=True, blank=True)) User.add_to_class('about', models.TextField(blank=True)) Django1.1.1 Python 2.5

  Read the article

• WCF configuration for WebHttpBinding(Restful) for supporting both HTTP and HTTPS

  - by KSS

  We are using AJAX Cascading dropdown and AutoComplete functionality with Restful WebService Services providing data. With one endpoint(non-secured) eveything was working fine, until we tried same web page with https. Our Webappplication needs to support both. Our of very few articiles/blogs on this issue I found 2 which applies to my requirements. 1. http://blog.abstractlabs.net/2009/02/ajax-wcf-services-and-httphttps.html 2. _http://www.mydotnetworld.com/post/2008/10/18/Use-a-WCF-Service-with-HTTP-and-HTTPS-in-C.aspx I followed same pattern, added 2 endpoints, assuming WCF will pickup appropriate endpoint looking at HTTP or HTTPS protocol. Worked like a charm in my dev machine(XP-IIS5) and 1 Server 2003R2(IIS6), however did work in Production server 2003-IIS6. Website in IIS is exact same(including permission etc). The error it throws - Error 500(Could not find a base address that matches scheme https for the endpoint with binding WebHttpBinding. Registered base address schemes are [http]..) Here's the sample configuration(ignore typos) <system.serviceModel> <bindings> <webHttpBinding> <binding name="SecureBinding"> <security mode="Transport"/> </binding> </webHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="SearchServiceAspNetAjaxBehavior"> <enableWebScript /> </behavior> </endpointBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <services> <service name="SearchService"> <endpoint address="" behaviorConfiguration="SearchServiceAspNetAjaxBehavior" binding="webHttpBinding" contract="SearchServiceContract" /> <endpoint address="" behaviorConfiguration="SearchServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="SecureBinding" contract="SearchServiceContract" /> </service> </services> </system.serviceModel> Any help on this is highly appreciated ? Thanks KSS

  Read the article

• WCF: Using Streaming and Username/Password authentication at the same time

  - by Kay

  Hi, I have a WCF Service with the following requirements: a) The client requests a file from the server which is transferred as a Stream. Files may be 100MB or larger. I need streaming or chucking or whatever to make sure that IIS is not loading the whole package into memory before starting to send it. b) The client will transfer an ID to identify the file to be downloaded. The user should be authenticated by providing username/password. c) While the username/password part of the communication needs to be encrypted, encryption of the downloaded file is optional for our use case. My other services, where I am returning smaller files, I am using the following binding: <ws2007HttpBinding> <binding name="ws2007HttpExtern" maxReceivedMessageSize="65536000"> <security mode="Message"> <message clientCredentialType="UserName" /> </security> </binding> </ws2007HttpBinding> But, as I said, that is no good for streaming (Message encryption needs the complete message to encrypt and that is not the case when streaming). So, I asked Microsoft support and I got more or less the following proposal: <bindings> <basicHttpBinding> <binding name="basicStreaming" messageEncoding="Mtom" transferMode="StreamedResponse"> <security mode="Transport"> <transport clientCredentialType="Basic" /> </security> </binding> </bindings> <services> <service behaviorConfiguration="MyProject.WCFInterface.DownloadBehavior" name="MyProject.WCFInterface.DownloadFile"> <endpoint address="" binding="basicHttpBinding" bindingConfiguration="basicStreaming" contract="MyProject.WCFInterface.IDownloadFile" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyProject.WCFInterface.DownloadBehavior"> <serviceMetadata httpGetEnabled="false" httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> When I use this, I get the following error message: Could not find a base address that matches scheme https for the endpoint with binding BasicHttpBinding. Registered base address schemes are [http]. I am using the Web Development Server so far (for production IIS7). I have two questions. a) How would you configure WCF to achieve the goal? b) If the MS proposal is good: What I am doing wrong, the error message does not really help me. Thanks.

  Read the article

• Could not load file or assembly 'System.Web.Ajax, Version=3.0.31106.0

  - by Jonesy

  HI folks, I have a .net application (vb.net) and I'm using the ajax control toolkit. It works fine on my production machine but when I upload it to the host (fasthosts) i get this error: Could not load file or assembly 'System.Web.Ajax, Version=3.0.31106.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' or one of its dependencies. The module was expected to contain an assembly manifest. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: Could not load file or assembly 'System.Web.Ajax, Version=3.0.31106.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' or one of its dependencies. The module was expected to contain an assembly manifest. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Ajax, Version=3.0.31106.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. Stack Trace: [BadImageFormatException: Could not load file or assembly 'System.Web.Ajax, Version=3.0.31106.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e' or one of its dependencies. The module was expected to contain an assembly manifest.] AjaxControlToolkit.ToolkitScriptManager.ApplyAssembly(ScriptReference script, Boolean isComposite) +0 AjaxControlToolkit.ToolkitScriptManager.OnResolveScriptReference(ScriptReferenceEventArgs e) +167 System.Web.UI.ScriptManager.RegisterScripts() +191 System.Web.UI.ScriptManager.OnPagePreRenderComplete(Object sender, EventArgs e) +113 System.Web.UI.Page.OnPreRenderComplete(EventArgs e) +8698462 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1029 Here is my web.conf file. Its very simple: <system.web> <customErrors mode="Off"/> <compilation debug="true"> <assemblies> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/></assemblies></compilation></system.web> Does anyone know whats up? -- Billy

  Read the article

• Integrating POP3 client functionality into a C# application?

  - by flesh

  I have a web application that requires a server based component to periodically access POP3 email boxes and retrieve emails. The service then needs to process the emails which will involve: Validating the email against some business rules (does it contain a valid reference in the subject line, which user sent the mail, etc.) Analysing and saving any attachments to disk Take the email body and attachment details and create a new item in the database Or update an existing item where the reference matches the incoming email subject line What is the best way to approach this? I really don't want to have to write a POP3 client from scratch, but I need to be able to customize the processing of emails. Ideally I would be able to plug in some component that does the access and retrieval for me, returning arrays of attachments, body text, subject line, etc. ready for my processing... [ UPDATE: Reviews ] OK, so I have spent a fair amount of time looking into (mainly free) .NET POP3 libraries so I thought I'd provide a short review of some of those mentioned below and a few others: Pop3.net - free - works OK, very basic in terms of functionality provided. This is pretty much just the POP3 commands and some base64 encoding, but it's very straight forward - probably a good introduction Pop3 Wizard - commercial / some open source code - couldn't get this to build, missing DLLs, I wouldn't bother with this C#Mail - free - works well, comes with Mime parser and SMTP client, however the comments are in Japanese (not a big deal) and it didn't work with SSL 'out of the box' - I had to change the SslStream constructor after which it worked no problem OpenPOP - free - hasn't been updated for about 5 years so it's current state is .NET 1.0, doesn't support SSL but that was no problem to resolve - I just replaced the existing stream with an SslStream and it worked. Comes with Mime parser. Of the free libraries, I'd go for C#Mail or OpenPOP. I looked at a few commercial libraries: Chillkat, Rebex, RemObjects, JMail.net. Based on features, price and impression of the company I would probably go for Rebex and may in the future if my requirements change or I run into production issues with either of C#Mail or OpenPOP. In case anyone's needs it, this is the replacement SslStream constructor that I used to enable SSL with C#Mail and OpenPOP: SslStream stream = new SslStream(clientSocket.GetStream(), false, delegate(object sender, X509Certificate cert, X509Chain chain, SslPolicyErrors errors) { return true; });

  Read the article

• PHP SimpleXML recursive function to list children and attibutes

  - by Phill Pafford

  I need some help on the SimpleXML calls for a recursive function that lists the elements name and attributes. Making a XML config file system but each script will have it's own config file as well as a new naming convention. So what I need is an easy way to map out all the elements that have attributes, so like in example 1 I need a simple way to call all the processes but I don't know how to do this without hard coding the elements name is the function call. Is there a way to recursively call a function to match a child element name? I did see the xpath functionality but I don't see how to use this for attributes. Any ideas? Also does the XML in the examples look correct? can I structure my XML like this? Example 1: <application> <processes> <process id="123" name="run batch A" /> <process id="122" name="run batch B" /> <process id="129" name="run batch C" /> </processes> <connections> <databases> <database usr="test" pss="test" hst="test" dbn="test" /> </databases> <shells> <ssh usr="test" pss="test" hst="test-2" /> <ssh usr="test" pss="test" hst="test-1" /> </shells> </connections> </application> Example 2: <config> <queues> <queue id="1" name="test" /> <queue id="2" name="production" /> <queue id="3" name="error" /> </queues> </config> Pseudo code: // Would return matching process id getProcess($process_id) { return the process attributes as array that are in the XML } // Would return matching DBN (database name) getDatabase($database_name) { return the database attributes as array that are in the XML } // Would return matching SSH Host getSSHHost($ssh_host) { return the ssh attributes as array that are in the XML } // Would return matching SSH User getSSHUser($ssh_user) { return the ssh attributes as array that are in the XML } // Would return matching Queue getQueue($queue_id) { return the queue attributes as array that are in the XML } EDIT: Can I pass two parms? on the first method you have suggested @Gordon public function findProcessById($id, $name) { $attr = false; $el = $this->xml->xpath("//process[@id='$id']"); // How do I also filter by the name? if($el && count($el) === 1) { $attr = (array) $el[0]->attributes(); $attr = $attr['@attributes']; } return $attr; }

  Read the article

< Previous Page | 305 306 307 308 309 310 311 312 313 314 315 316  | Next Page >