Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 31/538 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Computer randomly shuts down with a fading alarm power button and CD drive

  - by Shad

  I am currently experiencing something very very odd. Having build my PC myself, I have never had any issues (or anything heat related). A few moments ago my computer shut down very randomly and everything goes blank, when I looked down on my case's power button it was fading on and off in such way I've had never seen before. I noticed the CD drive all of a sudden also started blinking randomly. What do you guys think this problem is related to? It is definitely not a overheating issue and I am pretty sure my 600 watt power supply didn't blow because right now I am able to turn it on and boot up the PC but 20 seconds later it shuts down (sometimes doesn't shut down for 2 minutes). I have no idea what this is... My specs are (built by myself): i5 3570k (unoverclocked) GTX 560ti Asrock Z77 Pro4-M motherboard 8GB Vengeance RAM 600W Corsair power supply 500GB of Seagate HD Case: Corsair Carbide 300R

  Read the article

• Is the 4-pin PSU connector required? (Trying to connect a PSU to a mini case.)

  - by Geeks On Hugs

  I am trying to build a computer, placing an ASUS P8H67-I DELUXE in a custom retro C64 case. The case is an extra small form factor which can accomodate the Mini ITX board, but requires an external power supply, similar to the power-bricks that laptops use. I am looking at different power supplies and like these, but cannot figure out whether/how to power this system because they provide a 24-pin connector, but the motherboard has a 4-pin connector as well. Is the 4-pin connector optional or is it required? If it is required, how can I provide power for this system?

  Read the article

• Dell Latitude E6400 power button and wireless not working or only working intermittently

  - by Droid

  The power button on the laptop stopped working randomly as of a day or two ago. I can only power the laptop on if its attached to a docking station, on which I can use the power button to turn on/off the laptop. Today the wireless card stopped working (the wifi light does not turn on, even after I turn on the wireless switch). What is the problem and how can I fix it? The laptop is about 1 year old. I have not dropped it, but do carry it around a good amount, including docking it/undocking it frequently.

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• How to boot Snow Leopard without Rebel EFI?

  - by RahulVyas

  I have Mac OSX 10.5.7 on one hdd and I want to install Snow Leopard 10.6 so I attach another hdd, format it with GUID, and then boot my system using free Rebel EFI disc, then I install the Snow Leopard but in the end the setup fails. When I restart the PC and boot using Rebel EFI it shows Snow Leopard installed. So I boot that in safe mode and it started. My problem is I cannot boot it into safe mode because I have Chameleon already installed for 10.5.7 and in the Chameleon I can not see any option to boot into safe mode? So does someone know how do I boot Snow Leopard?

  Read the article

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• Prevent udev / uevents looking up DVD at boot time

  - by Sampo

  Problem: Boot time delay caused by udev. Early after initscripts starts there is message saying waiting for uevents to be processed and causing delay on boot, it seems that udev is looking if there is disc in dvd tray. After udev has found disc, boot process continues normally. Main question: How to prevent udev dvd lookup at boot time? Maybe there is some way to skip some udev related stuff and let boot process continue and then later instruct udev to do stuff that may cause some delay (delay in uevents, but not in main boot process, is acceptable after udev is initially loaded).

  Read the article

• Cant install windows 7(boot problem)

  - by Vadiklk

  First of all, I cant boot my windows 7. I get a black screen with a cursor up in the left corner. So, I tried using windows 7 installation which I've put on my flash drive. To boot from the drive, I've changed the boot order to boot from the drive first. It boots but does not find any HDD to install the windows on(which is pretty logic, I dont boot the HDD soon enough for the installer). but if i put the HDD in front of the flash drive in the boot order, it will just try to load windows 7 and i will get the black screen again. I've tried putting the HDD first and clicking f8 a lot. All I've got is an error. Something about some software change. I dunno. Help me please, cant do anything with my laptop till then.

  Read the article

• Dual boot Windows 8 and Ubuntu?

  - by askvictor

  I've installed Windows 8 on a machine (lenovo x220 laptop) with Ubuntu 12.10 already installed on another disk. I am guessing that Windows 8 has convinced the laptop to switch to UEFI boot (rather than the BIOS boot that was there previously) as the Lenovo splash screen on startup now no longer has the options to interrupt the boot process (e.g. to choose the boot drive). Previously I had Windows 8 on one drive and Ubuntu on the other drive, so could choose my OS through the BIOS rather than through grub or other bootloader but now no longer have that option. How can I get back the option to boot Ubuntu? I would sort of prefer UEFI boot as it seems much faster than BIOS.

  Read the article

• Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

  - by Samuel Taylor

  I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

  Read the article

• Adding Windows 7 to Fedora 17 Grub Boot Loader

  - by Kyle

  I'm trying to set up a dual-boot situation with my Windows 7 and Fedora 17 partitions and I left the install grub to /boot option on when I was installing Fedora. I would like to be able to add Windows 7 to the grub boot loader, but the advice I've seen online says to modify /boot/grub/grub.conf, but I don't have that file. $ ls /boot/grub/ splash.xpm.gz Has anyone done this? I'm thinking that I'll just need to re-install everything and use the Windows boot loader, but it would be nice to use grub instead.

  Read the article

• Netbook won't boot after using EasyBCD

  - by TNC

  I have an Asus T91MT netbook on which I used to have Windows 7 Home Premium and Ubuntu 10.10 installed (dual boot). After trying to upgrade to Ubuntu 11.04, Ubuntu is no longer able to boot, so I tried to uninstall Ubuntu completely and then reinstall it. Following these directions, I tried using EasyBCD to bypass the GRUB2 bootloader so that after uninstalling, it would automatically boot into Windows 7. However, after doing the "install BCD" step and restarting, I got the following message: Windows failed to start... File: \Boot\BCD; Status: 0xc0000098; Info: The Windows Boot Configuration Data file does not contain a valid OS entry. I'm currently trying to create a USB stick of the Windows Installation disc but in the mean time, I can only boot from a Ubuntu USB stick. Is there anything I can do from within Ubuntu to fix this? Or does anyone have any other suggestions/solutions?

  Read the article

• Access boot menu from Windows 8 PC

  - by svnpenn

  I have a computer that came with Windows 8 preinstalled. I want to boot from a CD, in this case Hiren's Boot CD. However Windows 8 doesn't seem to like this. I have tried pressing F8, ESC, F12 and so on. I read online that Windows 8 can boot in 200ms, so that it might not even be possible to boot from a Live CD before Windows loads. I would like to know how to boot from a CD before Windows loads, if possible. If not possible, how to boot from the Live CD after Windows loads.

  Read the article

• Restore boot sector from a hard disc to another

  - by giang.asl.8

  I have a win7 on my old Seagate HDD. Recently I installed one new SSD and setup win8 on it. So I have a boot table to choose win7 or win8 to startup. Now when I tried to remove the old one (the Seagate), I can't boot into windows any more. I just have a blinking underscore in boot screen, forever ang forever. I guess the reason is that the boot sector, or boot table (or something like that) was installed on the old HDD. So may someone show me how to boot into my win8 without reinstall the old HDD.

  Read the article

• System unable to boot in normal mode..! need to select recovery mode and than Generic Mode to boot.?

  - by Haresh Veera

  I am using Ubuntu Server 12.04 LTS KDE Mode. Couple of Days back I updated the system using Muon Package manager. After Updating, now when ever I boot the system, It get stuck at starting bluetooth Daemon Ok / Stopping Bluetooth Daemon Fail.and after long wait its get start to GUI Mode, but with no mouse detection. So need to reboot by pressing CTL+ALT+DEL and when I select recovery mode - Boot in Generic -- It boot perfectly. How can I set the same as default, and remove the error boot loader script. I am no expert to linux or Kernel.

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• Just updated, after reboot my computer won't start up again

  - by Alex

  I have a macbook that I use on occasion which dual boots Ubuntu and OSX (It has rEFIt installed). I turned it on for the first time in a while and it needed a bunch of updates. So I let it run, and restarted it when it asked. When it was booting up, it got stuck at a light blue screen. There was nothing on the screen to indicate that it was doing anything - I figured it just got stuck or something, so I turned it off and back on. (I suspect now it was actually working, but I had no indication that it hadn't just frozen) Now I can't access either OSX or my Ubuntu partition. When I choose ubuntu on the rEFIt menu, it shows "No bootable device -- insert book disk and press key". If I try to start up OSX is looks like it starts loading, but instead of an apple logo there's a crossed out circle icon.

  Read the article

• Ubuntu boots to terminal on start up

  - by Jules

  For a long time I've been unable to get updates due to a "repositories not found" error. Yesterday someone fixed this for me but after installing 94 days worth of updates my system wanted to restart. It looks like it is booting normally but then it opens a terminal and asks for my login and password. I had tried Ctrl+ Alt +F7 and startx to no avail. Here is everything that appears on screen when I turn the computer on. Ubuntu 10.04.4 LTS box-o-doom tty1 box-o-doom login:julian password: last login: Sun Jul 8 10:28:02 BST tty1 Linux box-o-doom 2.6.32-41-generic-pae #91-Ubuntu SMP Wed Jun 13 12:00:09 UTC 20 12 i686 GNU/Linux Ubuntu 10.04.4 LTS Welcome to Ubuntu! *Documentation: http://help.ubuntu.com julian@box-o-doom:~$_ i then tried dmesg which produced hundreds of lines all very similar to the first line reproduced here [ 9.453119] type=1505 audit1341742405.022:10): operation="profile_replace" pid=743 name="/usr/lib/connman/scripts/dhclient-script" follwed by this at the end [ 9.475880] alloc irq_desc for 27 on node-1 [ 9.475883] alloc kstat_irqs on node-1 [ 9.475890]forcedeth 0000:00:07.0: irq27 for MSI/MSI-X [ 9.760031] hda_code:ALC662 rev1: BIOS auto-probing. [ 10.048095] input:HDA Digital PCBeep as /devices/pci 0000:00:05.o/inp ut/input6 [ 10.862278] ppdev: user-space parallel port driver [ 20.268018] eth0: no IPv6 routers present julian@box-o-doom:~$_ results of startx lots of text scrolls off the screen and i have no way of reading it. but everything i can see is reproduced below current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version Markers: (--) probed, (**) from config file, (==) defult setting, (++) from command line, (!!) notice, (II) informational. (WW) Warning, (EE) error, (NI) not implemented, (??) unknown. (==) log file: "/var/log/Xorg.0.log", Time: SUn Jul 8 12:02:23 2012 (==) using config file: "/etc/X11/xorg.conf" (==)using config directory: "/usr/lib/X11/xorg.conf.d" FATAL: Module nvidia not found. (EE) NVIDIA: Failed to load the NVIDIA kernal module please check your (EE) NVIDIA: systems kernal log for aditional error messages. (EE) Failed to load module "nvidia" (module specific error, 0) (EE) No drivers available. Fatal server error: no screens found please consult the X.org foundation support at http://wiki.x.org for help please also check the log files at "/var/log/X.org.0.log" for aditional informati on ddxSigGiveUp: Closing log giving up xinit: No such file or directory (errno 2): unable to connect to X server xinit: No suck process (errno 3): server error julian@box-o-doom:~$_

  Read the article

• How to restore Windows 7 MBR without a CD

  - by Brandon Bertelsen

  I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

  Read the article

• Bootable usb stick not boots

  - by Pavaroti Luciano

  i have problem. My bootable usb stick not boots any linux distribution.. it just stop at BIOS, like before turning on OS, but it does nothing. Windows xp/7/8.1 installs boots perfectly. It stopped booting every linux dist. after windows 8.1 installation. Later i deleted windows 8.1 and installed windows 7, and now i want to install ubuntu from usb, but i cant(From disk every linuxOS boots perfectly but not from usb) My computer now is like ~7years old. Specs: CPU: AMD Athlon 64 X2 5000+ Motherboard: GIGABYTE GA-M56S-S3 Video card: Nvidia n210 EDIT: It boots on my other laptop..its bootable, but from this.. NOpe, only windows installs

  Read the article

• Ubuntu not booting after upgrade to 12.04 from 11.10

  - by ddd

  I upgraded to 12.04 from 11.10 today. After the upgrade, I did the usual reboot of the system and then Ubuntu hangs on Checking battery state..[OK]. I can login to terminal with Ctrl-Alt-F5 and I did startx but it hangs after displaying white images of the desktop icons..there is no menu or any top bar at all. I guess this problem has something to do with Xserver, but I cannot find xorg.conf on my system. How can I get around this problem? Also is there a way I can make a backup of my files through the command line, because the GUI is not showing up at all?

  Read the article

• Ubuntu can't shut down correctly [closed]

  - by Luc1Hz

  Possible Duplicate: Problem with ubuntu 12.04 I am new to Ubuntu. I've installed 12.04 version of Ubuntu. It works fine but sometimes when i shutdown my PC from Ubuntu and when I try to start it again,nothing shows on the screen. It's always black screen instead of Acer logo (I have Acer aspire 5573) and the system restart again and again but and doesn't allow me to choose a OS (Ubuntu/windows,i use dualboot) To fix this I have to remove the battery and put it again.Then everything works fine. How do i fix this issue? I think that could be a incompatibility with the PC because everything works fine with windows. Thanks!

  Read the article

• Power states in Windows

  - by Kurt

  Does anybody know or have a link to documentation on how the Power Manager of Windows, determines to go to the ACPI power states S1-S4? Are there any settings that can be configured? I know that by default states S1-S3 are disabled in Vista and later (they can be enabled by a group policy). Can Windows cycle through these states while for instance an application is actively running?

  Read the article

• Intel atom and overall power consumption

  - by amorfis

  I am considering buying of Intel Atom machine. Power consumption is one of my concerns (it is for small server). I know CPU itself consumes a little power, but I heard that chipset consumes much more. Anybody knows how much can such machine consume? I am considering Intel MoBo BLKD945GCLF (chipset: Intel® 945GC Express Chipset with ICH7)

  Read the article

• External hard drive that gets its power supply from the PC.

  - by AngryHacker

  I need an external drive to connect to my MacMini. I've been using an 80gb 2.5 drive in an enclosure and it's fine, but now I need a 1.5TB drive. Unfortunately all the 1.5TB drives I found need a separate power supply. I'd like it to be able to feed its power off the USB drive (just like my 80gb drive does). Does something like that exists?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >