Search Results

Search found 12829 results on 514 pages for 'c0de hard'.

Page 31/514 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• OSSEC HIDS Notification "Unknown problem somewhere in the system." (seems like hdd issue)

  - by John

  from what i understand somethings is wrong with hdd i am trying to find some commands in order to run some tests to check if hard disk is OK I will post a full list of logs after REBOOT of system: "Unknown problem somewhere in the system." kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:c8:38:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: ata2.00: error: { UNC } kernel: ata2.00: failed command: READ FPDMA QUEUED kernel: res 51/40:78:88:5c:16/00:00:00:00:00/40 Emask 0x409 (media error) <F> kernel: sd 1:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461400 on sda1) kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: sd 1:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed kernel: md/raid1:md1: read error corrected (8 sectors at 1461672 on sda1) Also some of this logs are duplicate or even more. Thanks.

  Read the article

• Ubuntu install can't find hard drives

  - by Casey Hungler

  I recently got a Dell Inspiron Special Edition 7720 computer. I am trying to install Ubuntu along side Windows. When I use the WUBI installer, the installation of Ubuntu works as long as I do not boot into Windows; if I boot into Windows, when I go back into Ubuntu, I am given a variety of error messages which claim to have corrupt or missing kernel/root directory, etc. I have been working with this problem for about a week, and have reinstalled Ubuntu MANY times. So far, I have eliminated all of the following problems: Corrupt WUBI installation (Downloaded multiple times, used on other systems), I have tried using a CD and a flash drive, both of which work on other computers. I know that no program within Ubuntu is creating the problem. I know that others have successfully installed Ubuntu on a computer with my operating system (Windows 7 SP1). This is a much shortened version of the original question, which has been up for about 5 days, and included a more detailed description of the problem, but left everyone clueless as to the source of this problem. When I spoke with the Dell service technician who came over today to replace my keyboard, he suggested that the driver for my HDD was so new that it was not compatible with the current version of Ubuntu. His reasoning is as follows: 1) During an install from a flash drive or CD, where I am supposed to get the option to wipe my system or create a dual boot, I get a window that asks me to select a hard drive partition, but none are listed. 2) This model of computer was made public in June of this year, while Ubuntu was released in April Adopting this theory, it would seem to me that the WUBI install fails after booting into Windows because Ubuntu can no longer find the files that it needs to load. Does this theory seem at all plausible to anyone? I just want to install Ubuntu and have it stay on my computer. I don't care how I put it there, I just need it to work, so I would TRULY appreciate any advice or suggestions anyone could give. Thanks so much for your time and support!!!

  Read the article

• Am I running out of memory or do I have two logical drives instead of one

  - by user30904

  I did a complete reinstall of Ubuntu 13.04 a couple of months ago. Since then, I have switched out my motherboard with another. I kept the same hard drive. I just did an upgrade to 13.10. Recently, after this install, I keep getting the message that I'm running out of memory. I just checked my system usage and was surprised by what I found. I believed that I installed Ubuntu as a fresh install but when I check the system usage, it seems like there are two logical drives. I just did the basic install, so I was only expecting to see one partition but instead I see two. One is a small 300mb partition, the other is a 300gb partition I was expecting. Can anyone tell me if I have two partitions and/or logical drives and if so how I can fix this? I seem to have been running on the smaller drive and now I'm obviously out of space. I want to be able to use the bigger one at least.

  Read the article

• input / output error, drives randomly refusing to read / write

  - by ILMV

  I have an issue with one of our servers running Ubuntu 10.04, it is running BackupPC and collects backups from various machines / servers around the building. On the 8th minute (12:08, 12:18, 12:28 etc) the backups are transferred to an external hard drive, we have three and rotate one drive for another everyday. The problem we are having is we are randomly experiencing input / output errors, when this happens you cannot read / write to the drive, it hasn't unmounted so I can cd to the mount point /media/backup1. The drives are not faulty as it's happening on all of them, so I'm at a loss as to what the problem could be, here is an example of the many errors we get: gzip: stdout: Input/output error /var/lib/backuppc/backuppc_offline: line 47: /media/backup1/Tue/offline.log: Input/output error ls: cannot access /media/backup1/Tue/incr_1083_host1.something.co.uk.tar.gz: Input/output error ls: cannot access /media/backup1/Tue/incr_1088_host1.something.co.uk.tar.gz: Input/output error ls: cannot access /media/backup1/Tue/incr_1089_host1.something.co.uk.tar.gz: Input/output error ls: cannot access /media/backup1/Tue/incr_1090_host1.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 39: /media/backup1/Tue/offline.log: Input/output error /var/lib/backuppc/backuppc_offline: line 44: /media/backup1/Tue/offline.log: Input/output error /var/lib/backuppc/backuppc_offline: line 45: /media/backup1/Tue/incr_1090_host1.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 47: /media/backup1/Tue/offline.log: Input/output error ls: cannot access /media/backup1/Tue/incr_591_tech2.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 44: /media/backup1/Tue/offline.log: Input/output error /var/lib/backuppc/backuppc_offline: line 45: /media/backup1/Tue/incr_591_tech2.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 47: /media/backup1/Tue/offline.log: Input/output error ls: cannot access /media/backup1/Tue/incr_592_tech3.something.co.uk.tar.gz: Input/output error ls: cannot access /media/backup1/Tue/incr_593_tech3.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 44: /media/backup1/Tue/offline.log: Input/output error /var/lib/backuppc/backuppc_offline: line 45: /media/backup1/Tue/incr_593_tech3.something.co.uk.tar.gz: Input/output error /var/lib/backuppc/backuppc_offline: line 47: /media/backup1/Tue/offline.log: Input/output error EDIT » Resolved So it turns out Quamis was right, even though I didn't think it was possible it was actually a problem with the drive. You see we have three drives all formatted to ext2, on two of them we were getting I/O errors frequently, I cam back to Quamis' answer and discovered the fsck command, so ran it against the problems drives: fsck /dev/sdb1 This found and fixed a load of problems on the drive, most probably caused by power outages / unsafe removal of drives etc, as the drives are in the xt2 format they aren't journalled and thus aren't protected against such issues. Drives are now working beautifully, thanks all! :D

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• Should Exterrnal USB hard drive auto mount Ubuntu 12.04.01 LTS

  - by Chris Good

  I want to have external USB hard drives automatically mounted when plugged in. I have 2 drives exactly the same except for volume label. They both have the same UUID. I want to be easily able to swap them as I'm using them for backups and want to keep 1 at home for off site backup. I've set up the /etc/fstab so they should mount at different places based on their volume label: /etc/fstab : LABEL=Passport1 /media/Passport1 ntfs defaults,windows_names,locale=en_US.utf8 0 0 LABEL=Passport2 /media/Passport2 ntfs defaults,windows_names,locale=en_US.utf8 0 0 blkid shows : ... /dev/sdc1: LABEL="Passport2" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" /dev/sdd1: LABEL="Passport1" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" They both mount automatically during reboot but do not mount when just plugged in to a running system. I've read lots of stuff about this, much of it is old so I'm not sure if it applies. I've read some stuff that says the mounts should happen automatically when plugged in, and lots of other stuff that says you have to install other software to make this happen, although much of it just seems to set up the fstab. What's the real story? Here is /var/log/syslog when drive is plugged in: Dec 14 11:22:58 ausyvutims1 kernel: [66221.300196] usb 1-1: new high-speed USB device number 6 using ehci_hcd Dec 14 11:22:58 ausyvutims1 mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1" Dec 14 11:22:58 ausyvutims1 mtp-probe: bus: 1, device: 6 was not an MTP device Dec 14 11:22:58 ausyvutims1 kernel: [66221.656020] scsi7 : usb-storage 1-1:1.0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.661534] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.666466] scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667739] sd 7:0:0:0: Attached scsi generic sg3 type 0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667913] ses 7:0:0:1: Attached Enclosure device Dec 14 11:22:59 ausyvutims1 kernel: [66222.668047] ses 7:0:0:1: Attached scsi generic sg4 type 13 Dec 14 11:22:59 ausyvutims1 kernel: [66222.678473] sd 7:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) Dec 14 11:22:59 ausyvutims1 kernel: [66222.687700] sd 7:0:0:0: [sdc] Write Protect is off Dec 14 11:22:59 ausyvutims1 kernel: [66222.687705] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 Dec 14 11:22:59 ausyvutims1 kernel: [66222.701076] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.701081] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.738062] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.738068] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.754558] sdc: sdc1 Dec 14 11:22:59 ausyvutims1 kernel: [66222.792006] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.792012] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.792016] sd 7:0:0:0: [sdc] Attached SCSI disk Dec 14 11:22:59 ausyvutims1 ata_id[16971]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument Thanks for any help offered

  Read the article

• Dual-boot computer won't boot without external hard drive

  - by FrankP

  I have Ubuntu loaded on my external HDD. I tried to unplug the external drive so that this way I could run Windows as the default OS to boot when the computer turns on, but it gives me an error. I need to know how I can make it so that when my computers boots it stops saying Error: no such device: (a whole bunch of numbers and letters) then it says grub rescue>_. If I plug the external HDD in, and I let Ubuntu run the boot process, then it gives me a list of OS's/ HDD's to choose from and Windows 7 is there. The only problem is that I want Windows be my default OS, not the other way around. P.S. I have found that I dislike Ubuntu because I can't even figure out how to install the necessary programs to learn how to start writing Ruby On Rails. So installing it was a waste of my time, in my opinion. Now that I have it on the external hard drive, I will leave it installed though. I just dont want to have to keep that external drive plugged in to my computer all the time. Thank you a ton to whoever can help me! Thank you for the detail'd instructions. I am doing my best to follow you and it makes sense when I read it but, Rescatux is not doing what you said it would. None of the options you said would appear are not there. On my screen there is 4 options when MBR run's none look familiar and when I picked the best possible option based on my educated guesses it said success. I tried to restart my computer and it said Please insert windows recovery disc and hit enter. Problem being I don't have the windows recovery disc. I bought my computer from a local Computer tec and he loads windows on it for you. I have no time to run my compute over to him as sunday is my only day free. I think that I just wrecked my computer in the process of this attempted fix windows refuses to boot now WITH or WITHOUT the HDD. Please help this is getting out of hand

  Read the article

• Synchronize the same set of files to 2 different locations with 2 different programs for 2 different purposes

  - by Hedgetrimmer

  Because of stupid questionable IT policies at my not-to-be-named place of occupation, I have been (and will be, for the forseeable future) carrying on an external hard drive a unison-synchronized copy of all of my documents and code, including code which resides in some of my "dotfiles" and other code which resides in ~/bin (things I've made are there because ~/bin is in my $PATH) along with some cruft generated (and to be generated) by conscript and its related "giter8" templating system for Scala project boilerplates. Despite this, I do use a symlinking program to store all of my important dotfiles in a subdirectory. Thanks to that somewhat complicated setup, I have resorted to making a directory full of symlinks to every directory (or file, as is the case with stuff under ~/bin) that I want synchronized, and then follow = True is in my unison profile. It happens to be that this collection of odds and ends—plus an automatically-generated text file containing every package installed on my system—is everything under ~ that needs to be backed up to a remote (rsync-over-ssh) host with client-side encryption and signing from GPG. I already believe that duplicity is the most appropriate program to do that. What isn't as clear-cut is how to make duplicity use the exact same set of files when it runs a backup; it would be simple if duplicity would follow symlinks, but it does not and the manpage lists no option for enabling any such behavior. Comparing unison's file selection algorithm to duplicity's, I don't think I can write a program that could compute a ruleset for one program given one for the other. For the record, I would rather not keep the symlinks manually synchronized with duplicity file-selection rules, as they can change thanks to the above-mentioned complications regarding ~/bin. I don't think running duplicity on the external hard disk is such a good idea either; I usually keep that hard disk unmounted and unplugged in case of a power failure or other physical problem with the computer, plus I'm not sure about duplicity's performance given that: the hard disk is NTFS-formatted in order to be useable at my Windows-imprisoned place of occupation. despite being a USB 3.0 disk, my computer has no USB 3.0 ports so it acts as a USB 2.0 disk. How can I have duplicity (or is there a better program that I have overlooked?) back up the exact same set of files that is bidirectionally synchronized with my external hard disk?

  Read the article

• Motherboard HDDPWR1 connector

  - by Eric Leschinski

  I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

  Read the article

• Migrate Windows Server 2008 to a new hard disk 2

  - by MainMa

  Hi, A few weeks ago, I already asked how to move a Windows Server 2008 to a new hard disk. Despite the previous answers and two weeks lost trying to do it, I am always unable to move the OS to the new drive. What I tried: A backup/restore using Windows Backup. This never helped. First, I tried to backup, then copy the backup to a new drive, then restore. This results in "The parameter is incorrect. (0x80070057)" error caused by a bug in Windows Backup. Recently, I attempted to backup to a network share, but I can't restore from it, because of a "*The network path was not found. (0x80070035)" error. Trying the netsh interface ipv4 set address [...] does not work neither (saw at least three different errors, mostly "The interface is unknown.") A previously suggested solution using imagex from Windows AIK results in a non-bootable disk after writing an image to it. When booting from Windows 2008 installation disk (from USB), it finds that the HDD is not bootable and proposes to fix this, but then crashes, resulting in an unbootable USB flash disk (and HDD stays unbootable). As I said in my previous question, doing a clone of a hard disk drive gives an (of course) bootable disk, but Windows complain about hardware changes and cannot start. Now can somebody suggest me another way to move Windows Server 2008 to a new hard disk? Is it at least possible to do, or any hard disk failure/change implements necessarily to reinstall the whole OS?

  Read the article

• Windows 7: Setting up backup to an external hard drive on another computer on the network

  - by seansand

  I have an external hard drive connected to a Windows 7 (Home Edition) computer. I have another computer (with Windows 7 Ultimate), and I want to have the Windows 7 Ultimate back up to the same external hard drive, without having to disconnect and move the external hard drive from the Home Edition PC. When I get to the "Set up backup" dialog within Windows 7, it asks me where to save the backup. I select "Save on a network". However, when I enter "\\computername\harddrivename" under Browse, the "OK" button remains grayed out. The button remains grayed out unless I also enter a Username and Password under "Network credentials". However, the account I have on the other computer doesn't have a password for it. To un-gray out the button I must enter a fake password, allowing me to click "OK", but then obviously I get a "bad password" error. Does anyone know how to get around this problem? (Seems kind of ridiculous.) I made sure that the security settings with the external hard drive on the other computer are full access to Everyone, so permissions is not the problem. I also thought about using Homegroup instead of the regular security settings, but there is no obvious way to go about it that way, either.

  Read the article

• scan partition for bad blocks

  - by user22559

  Hello everyone I have a hard disk with bad sectors on it. I want to partition the drive so that the partitions are in the good part of the hard disk, and the parts that have bad sectors are not used. The first ~20GB of the hard disk are good. Then comes a ~13GB part that is riddled with bad sectors. After that, the hard disk is good again, but at the very end there is a ~2GB part with bad sectors. I have used an app called "Hdtune" to get this information, and I have created a 19GB c: partition at the beginning of the drive, then skipping the 13GB of bad sectors, then creating the D: partition that spans the rest of the disk, minus the last 2GB. The C: partition works well (i have been using it for a month and i have got no error whatsoever), but the D partition has been giving me problems. Somehow, it seems that I have some bad sectors in the D: partition. I am looking for an app that scans the HDD, finds the bad blocks, and shows them in a map so I can see if they are in the D partition. Or, an app that scans only a specified partition for bad sectors, and then shows in a map where the bad sectors are in the partition. I want to know this so I can resize the D partition so that it is outside of the bad area of the disk.

  Read the article

• My Boot order changed. Why?

  - by Chris

  I have a laptop running Windows XP SP3 with one internal hard drive partitioned into C: (system), D: (storage) and I have an external hard drive, F: (external drive). Yesterday the machine was running fine. Today, I go back to it and see that it's just showing a blinking cursor. Checked through the BIOS and the hard drive checked out fine. CTRL-ALT-DELETED the machine a few times, but I was never able to boot back into the operating system. I threw in a live CD and found out that the boot order of the drives has changed. The external drive is now C:, the system partiton is D:, and the storage partition is E:. Does anyone have any idea of how or why this would have occured? Auto system updates are turned off so there should have been no automatic reboot of the system overnight, and anti-virius runs on the machine and has found no infections before this occured. Edit When I was looking through the BIOS of the machine, I did see that the boot order was changed. But still the same question remains, what would have caused this to happen? I can't believe that a random reboot happened and totally changed my hard drive setup.

  Read the article

• daily rsync backups with hard links, checksums, and a new computer

  - by user75058

  I backup my laptop to a Fedora desktop daily using rsync with hard links. This has worked great for almost a year. I recently purchased a new computer, transferred over my data, and would like to continue backing up this computer daily. However, due to the data transfer from the old laptop to the new laptop, the timestamps have obviously changed, and will thus cause my daily rsync backup to re-transfer all of the data. I thought that by adding the -c (checksum) switch to my rsync backup it would match files based on checksum, instead of timestamp and size, and only transfer those files that are different or not present. This appeared to work, but upon examining the new backup, hard links are not being created, and it appears the files that should be hard linked are simply being copied to the new backup directory from the previous backup directory on the backup server. This is very peculiar behavior to me, and I am having trouble figuring out why this is occurring. Checksums match for files that I think should be hard linked. I have looked through the rsync man page and Google'd around a bit and have been unable to find anything for me to better understand this behavior.

  Read the article

• Windows 7 hangs with 100% disk activity but only when online

  - by jeremy

  I have the same problem as seemingly many other people here, and I think we might all be experiencing the same issue: a compatibility issue in Windows 7 between hard drive and network controller or drivers. I've tried firmware updates of my entire board, wiping my drive and reinstalling from scratch. And yet the problem persists, which suggests it is an operating system error, as the hard drive checks out 100% physically. Additionally, the only time it does not occur is when in safe mode WITHOUT networking. With networking, there are spikes in disc access every so often and a huge flow of processes accessing the disc simultaneously that literally "stick" the disc, and physically jolting my computer unsticks it. Again, this has been tested for hours in a professional service environment, and without network access on, things are fine. As soon as there's network access available, the disc access occasionally cranks up to 100% and sticks everything. I'm using Microsoft Security Essentials, but this also happened under Norton, then McAfee. Again, this happened again after a complete wipe, so the likelihood of malware causing it seems low. I don't visit unsecure sites anyway, as far as I know. This, to me, narrows it down to a Windows 7 process that is somehow repeatedly corrupted, perhaps a corrupt .dll or driver, causing a conflict at the operating system level and temporary hard drive failure. I would encourage anyone who knows more about this stuff (which is probably most people!) to take a shot at this one, and I would encourage anyone else with a sticking hard drive in windows 7 64-bit to check on whether it occurs during safe mode without networking.

  Read the article

• How do I recover drivers from other hard disk

  - by Carl

  The drivers for a Cardbus (PCMCIA) card that gives me 2 USB 2.0 ports are on the hard disk from my old laptop. I have lost the driver CD. I have a way to get files from that other hard disk. Which files do I need? The drivers for the card used to be on the following website - the information is still there, except the download links don't work: http://www.ht-link.com/en/DownView.asp?ID=10 - The drivers I need are the first listing - The Win XP drivers for the HT-112NEC. My e-mails to them have not been answered. The information on this card is here http://www.ht-link.com/en/ProductView.asp?ID=106 I already tried connecting that other drive to my new laptop (via USB) and adding the drive to the search criteria when selecting update driver in the Device Manager. It says there isn't a better match, and if I select manual the matching device is not listed. (I don't think "manual" sees drivers on the external hard disk - but only ones on the main drive and/or found listed in the registry.) I would try 'have disk' if I knew exactly what file to point to on the external drive. The drivers are on that hard disk - I installed them there, and used that card on that computer. The new laptop has Windows XP Pro SP3, the old one had Pro SP2 Thanks for any help.

  Read the article

• Computer hangs at BIOS screen. Cannot enter setup.

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• Computer hangs at BIOS screen. Cannot enter setup

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• NTFS 'Owner' missing when accessing hard disk from external USB adapter

  - by trismarck

  I have a hard drive with Windows XP SP3 installed on it. When the drive is connected through the standard SATA connector inside the laptop, everything works as expected. However when I remove the drive from the laptop and connect the drive to the external USB adapter, almost all files / folders lose the 'Owner' field contents. I was wondering why could that be. I've tried two USB adapters and this happens on each. I could take the ownership of all of the files, but this would overwrite the Owner value (the Owner value that is present when the drive is accessed through standard SATA connector in the laptop). //edit: if the hard drive is used through the USB adapter, I can't access most of the files, at least until I take ownership of the files (/folders). This is how it looks like: HDD inside USB adapter: HDD inside laptop: (note the Owner column) //edit: some of the files on the first screenshot have Owner field filled up. That's because I took the ownership of those files / folders to be able to access the files on the hard drive. //edit2: also, if the hard drive is connected through USB adapter and if I've took the ownership of some files by the 'ddd' user, then if i login as a different user (lets say 'eee' user), the owner field is _still_ empty: ddd user: eee user: eee user can't access the 'ddd' folder. Both users have Administrator priviledges.

  Read the article

• Windows Vista freezes

  - by Kakurady

  Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

  Read the article

• Fixing Windows install by connecting it's hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• Fixing Windows install by connecting its hard drive via USB to a different laptop

  - by Jason

  I tried to upgrade a laptop to SP3, which broke it. I later found out SP3 doesn't work on that 2002 laptop. I can't uninstall SP3, or fix SP2, because the hard drive is now not detected during setup (I've read that's the problem you get). I put the hard drive in a USB drive case and plugged it into my other laptop, and I can read (& write to) the disk okay. (The hard drive won't fit in my other laptop, so I'm using USB.) I need to get that disk back to SP2, or fix whatever files got screwed up causing the disk to not be recognized. I don't want to do a re-install as there are 80GB of files on it I need, and they won't fit on the HD of my other laptop, and also because I no longer have some of the install CDs for software on it. What do I need to do to fix that drive from my other laptop? (I don't want my working laptop (XP SP3) to get screwed with by putting an SP2 disk in the CD drive, or the non-o/s data on the other hard drive screwed with.)

  Read the article

• How can I extract data from Toshiba Satellite with a dead Windows installation?

  - by msanford

  I've got a Toshiba Satellite (unknown model number but bought early 2010) running Windows Vista which throws a kernel error on boot. We don't have the restore/recovery CD any more to restore the Windows partition. I have managed to boot to a Live CD version of Ubuntu 10.10 and have mounted the internal hard drive (which takes nearly 8 minutes). I suspect that the hard drive is malfunctioning, however, because copy tasks of even 30 megs of data to an attached and mounted USB flash drive takes over an hour, and some files are mysteriously inaccessible (not a permissions issue). When browsing folders, it takes many minutes to populate the folder window even with a single tiny file. During the copy tasks, the hard disk sounds like it tries to sleep several times in rapid succession, then continues accessing, it sounds, at full throughput. I initially tried using scp (from the shell) to copy data but I encountered the same local problems. I don't know the S.M.A.R.T. status of the hard disk, either. Is there a more effective way of going about recovering the data on the internal disk, assuming that I can't use a recovery CD and am too cheap to bring it in (for now, at least)?

  Read the article

• Windows 7 constantly accessing hard drive [duplicate]

  - by Zohar

  Possible Duplicate: Tool which finds which process is causing the heavy hard drive activity? Did you notice that on Windows 7 (I use 64-bit) the hard drive LED is constantly blinking, which means that the OS is constantly wearing the hard drive by accessing it? It's something related to the system process, and it even occurs in safe mode, so I don't think it's a third party software problem. Has anyone experienced this problem as well, and is it a Windows problem, or caused by something else? Edit: My indexing service is reduced to indexing only the Start Menu. Even if it was set for the whole computer, it would eventually stop; that's not it. My friends also suffer from the same problem. Please answer my first question: have any of you have seen a Windows 7 machine whose hard drive LED is at rest? I'm also trying to track down the offending process using procmon and Resource Monitor, and it actually seems like a system process. It could also be svchost.exe, and I'm not sure which file they are accessing since I see a lot of activity which I can't make sense of. It's loading system DLLs, accessing registry keys, and other nonsense.

  Read the article

• The volume "filesystem root" has only 0 bytes disk space remaining?

  - by radek

  I installed 11.10 ~two weeks ago and run into some strange troubles recently. Installation was on brand new laptop with clear 128GB SSD. I opted for encrypting home directory. Apart from that I accepted defaults during the installation. There is no other OS on my laptop. I had circa 40GB in use when (for the third time) I got to see this very unpleasant window: Twice situation was pretty bad and whole system slowed down considerably. After reboot I could not login to graphical interface (with an error message informing about insufficient space) and had to remove some files from command line first. Third time I still managed to quickly delete some files and it helped. My laptop is mainly work environment: so no torrents, games, just two movies. Only media filling space are ~20GB of pictures, and bunch of pdfs. Working mostly on PostgreSQL & PostGIS, GeoServer and QGIS recently. Although I had lots of opportunities to test and practice my backups I would be extremely grateful if somebody could point me to any potential solutions to this problem. My laptop has been bought just before I installed Ubuntu, and it came without OS. Could that be hardware issue? Or is the encrypted home causing me headaches? Thanks for help! Update: As suggested by @maniat1k, here is current output of fdisk -l: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 312581807 156290903+ ee GPT

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >