Search Results

Search found 1565 results on 63 pages for 'can bus'.

Page 31/63 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • Linux RAID-0 performance doesn't scale up over 1 GB/s

    - by wazoox
    I have trouble getting the max throughput out of my setup. The hardware is as follow : dual Quad-Core AMD Opteron(tm) Processor 2376 16 GB DDR2 ECC RAM dual Adaptec 52245 RAID controllers 48 1 TB SATA drives set up as 2 RAID-6 arrays (256KB stripe) + spares. Software : Plain vanilla 2.6.32.25 kernel, compiled for AMD-64, optimized for NUMA; Debian Lenny userland. benchmarks run : disktest, bonnie++, dd, etc. All give the same results. No discrepancy here. io scheduler used : noop. Yeah, no trick here. Up until now I basically assumed that striping (RAID 0) several physical devices should augment performance roughly linearly. However this is not the case here : each RAID array achieves about 780 MB/s write, sustained, and 1 GB/s read, sustained. writing to both RAID arrays simultaneously with two different processes gives 750 + 750 MB/s, and reading from both gives 1 + 1 GB/s. however when I stripe both arrays together, using either mdadm or lvm, the performance is about 850 MB/s writing and 1.4 GB/s reading. at least 30% less than expected! running two parallel writer or reader processes against the striped arrays doesn't enhance the figures, in fact it degrades performance even further. So what's happening here? Basically I ruled out bus or memory contention, because when I run dd on both drives simultaneously, aggregate write speed actually reach 1.5 GB/s and reading speed tops 2 GB/s. So it's not the PCIe bus. I suppose it's not the RAM. It's not the filesystem, because I get exactly the same numbers benchmarking against the raw device or using XFS. And I also get exactly the same performance using either LVM striping and md striping. What's wrong? What's preventing a process from going up to the max possible throughput? Is Linux striping defective? What other tests could I run?

    Read the article

  • ubuntu 10.04 logs itself out overnight

    - by Corey
    Every night when I leave work, I lock the screen via ubuntu's "power" button in the top right hand panel. When I come to work in the morning, I'm greeted with the log-in screen. This doesn't happen every night, but most. I'm running ubuntu 10.04 on a Dell inspiron. I've included some HW specs, and also dmesg output. Please let me know what other logs may be useful. thanks! Corey ~$ dmesg [20559.696062] type=1503 audit(1285957687.048:16): operation="open" pid=6212 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [21127.951621] type=1503 audit(1285958255.300:17): operation="open" pid=6390 parent=1 profile="/usr/bin/evince" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/usr/local/lib/libltdl.so.7.2.2" [291038.528014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.528025] render error detected, EIR: 0x00000000 [291038.528042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973891 at 22973890) [291038.828014] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [291038.828023] render error detected, EIR: 0x00000000 [291038.828042] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -5 (awaiting 22973894 at 22973890) ~$ lspci -vv 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at dc00 [size=8] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at feaf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 80000000-801fffff Prefetchable memory behind bridge: 0000000080200000-00000000803fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20) Subsystem: Dell Device 02e1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Subsystem: Dell Device 02e1 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c-i801 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Subsystem: Dell Device 02e1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 26 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fdfe0000 (64-bit, prefetchable) [size=64K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 log$ tail -n 15 Xorg.0.log.old for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) Power Button: Close (II) UnloadModule: "evdev" (II) Power Button: Close (II) UnloadModule: "evdev" (II) USB Optical Mouse: Close (II) UnloadModule: "evdev" (II) Dell Dell USB Entry Keyboard: Close (II) UnloadModule: "evdev" (II) Macintosh mouse button emulation: Close (II) UnloadModule: "evdev" (II) AIGLX: Suspending AIGLX clients for VT switch ddxSigGiveUp: Closing log

    Read the article

  • Does it make sense to install an SSD into a 3rd generation MacBook?

    - by Ivan Krechetov
    I've heard that, to really benefit from a solid-state drive, one needs a motherboard fast enough. Do you think it's worth to install an SSD into this laptop? Model Name: MacBook Model Identifier: MacBook3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.2 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 4 GB Bus Speed: 800 MHz Boot ROM Version: MB31.008E.B02

    Read the article

  • Linux Fiber Channel Host Setup Basic

    - by Jim
    I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

    Read the article

  • How to know which speed of RAM can I use

    - by Phuong Nguyen
    I have a Dell Vostro 1000 which uses ATI RS480 mainboard. Specification says that the front bus of such mainboard is 1Ghz. However, the default RAM came with mainboard is PC4200 (533Mhz). I wonder if I can replace them with PC6400 (800Mhz) or at least PC5300 (667Mhz)?

    Read the article

  • IPod Touch - Refreshing Web Page while Offline?

    - by Anduril66
    Using my home wifi network, I open several browser windows on my Ipod Touch and load different web pages on them so I can read them on the bus later. Often, I can switch between windows and read the pages while WiFi is turned off but occasionally web pages try to refresh themselves when I switch to them. Why is this?

    Read the article

  • Slow draw on some apps and dynamic clocks not working properly with ATI/AMD proprietary drivers

    - by Rakeka
    I've recently purchased a new computer (around July 2010) and I've been having some problems with proprietary video drivers on Linux. The hardware is: Video: ATI/AMD Radeon HD 5870 (XFX HD-587X-ZNFC); Motherboard: Asus P7P55D-E Deluxe; Processor: Intel i5 750; Memory: Kingston Hyperx KHX1600C8D3K2/4GX (2x - 8GB Total); Power Supply: XFX P1-750B-CAG9; There are no overclocks, not even the memories (they are at 1333mhz due processor memory controller limitation). The operational system is a homebrew Linux distribution with the following software: Architecture: x86_64 (multilib) Kernel: 2.6.35.10 Xorg: 7.5 Window Manager: wmii-3.9.2 Video Driver: ATI/AMD Catalyst 10.12 There are no desktop effects programs like compiz fusion or beryl. The problems: With ATI/AMD proprietary driver, some applications are with slow draw/redraw, and, the same applications make the driver to increase the card clocks to maximum (0% gpu activity, only the clocks are increased). I dunno exactly how to describe the slow draw but I'll list some applications and symptoms. xterm Flickers a lot when drawing continuous output; When I'm in a workspace with fullscreen xterm, The gpu load stays at 12% in idle, and, with smaller xterm, smaller GPU load. "aticonfig --odgc" output: Default Adapter - ATI Radeon HD 5800 Series Core (MHz) Memory (MHz) Current Clocks : 157 300 Current Peak : 850 1200 Configurable Peak Range : [600-900] [900-1300] GPU load : 12% "aticonfig --pplib-cmd 'get activity'" output: Current Activity is Core Clock: 157MHZ Memory Clock: 300MHZ VDDC: 950 Activity: 12 percent Performance Level: 0 Bus Speed: 5000 Bus Lanes: 16 Maximum Bus Lanes: 16 More examples: mplayer time info flickers on terminal; "find /" flickers a lot (It takes some time to stop with control-c. But, If I change the workspace or put some window upon it, just after the control-c, it stops instantly); "cat somefile" if the file is big (Xorg.0.log for example) it takes some time to display; vim and less (ex: find / | less) don't have much problems, just a little flicker when scrolling; mplayer (no gui) Slow reproduction and seek with -vo x11; Tearing with -vo xv; Time info flickers on terminal (xterm consequence); gvim A little slow draw when scrolling with page up/page down; Firefox Slow draw/redraw on some pages like www.boadica.com.br and sometimes on www.youtube.com with flash enable (never noticed on many pages); Corruptions when informative yellow boxes are showing and scroll the page (an gray box appears at the same place of the informative box); "Wallpaper" After minimizing a fullscreen window or changing to an empty workspace it takes some time to redraw wallpaper. "Video Card" The core and memory clocks are increased with the events described above and on other situations like change workspace (even without wallpaper), minimize, maximize or move a window; Idle clocks: Core: 157mhz, Memory: 300mhz Full clocks: Core: 850mhz, Memory: 1200mhz xpdf Painful slow scrolling; display (from ImageMagick) Slow menus and sometimes slow image redraw; Programs that I use and are apparently without problems: gimp; pidgin; mplayer (-vo gl, gl2); blender; unigine heaven (better fps than on Windows); doom3; tibia; penumbra overture; amnesia the dark descent (wine); diablo 2 (wine); No problems on Windows (Windows 7 Ultimate 64bit). And special note to this: Full desktop effects from Debian and Ubuntu gnome appearance cpanel don't cause ANY problems, even the core and memory clocks don't increase when change workspace, minimize, maximize or move a window. What I've tested: Unsuccessful tests: Tested all drivers versions since 10.6 (released approximately when I've installed the first slackware in this PC); Tested other video card - ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Tested some options on xorg.conf and that I've found googling (some of these options are commented on my xorg.conf. I'll send the links at the end of post); Tested some patches like 107_fedora_dont_fill_bg_none.patch and xserver-xorg-backclear.patch from Arch Linux Catalyst page (https://wiki.archlinux.org/index.php/ATI_Catalyst); Tested other distros and software versions: Tested XORG-7.6 on my own distribution; Tested Debian Squeeze (testing - from 2010-12-20); Tested Ubuntu Marverick (10.10); Tested Slackware 13.1; Distros info: Architecture: i386 Debian and Ubuntu with all default software (kernel, gnome, xorg, drivers); Slackware with Catalyst from AMD page and default window managers like: fvwm, xfce, and my own build of wmii; Successful tests: Tested other video card (only on my homebrew distro) - NVIDIA Geforce 7300GS with driver 260.19.29; That didn't shown the slow draw problems, but that card is a bit obsolete, so, dunno if that lacks features like the dynamic clocks. I don't dispose of other video cards like nvidia g/gt/gts/gtx 200~400~500 or Radeon HD 3000/4000/6000 to make more tests. Tested other hardware: Video: ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Motherboard: Intel DG31PR; Processor: Core 2 Duo E6750; Software for that hardware: Fresh install of same distros (except for the mine) with same program versions; That video card (HD 5570) were full time at the maximum clocks (something like 500/750, don't remember) in all the operational systems (Windows XP and Windows 7 too), but it didn't shown the same problems that I have here. I've googled a lot about common problems with ATI/AMD proprietary drivers for Linux and didn't find similar problems, except by the Firefox corruptions, that the solutions were to disable ATI Direct2DAccel and use XAA. With XAA the problems persists and the other applications like pidgin and rest of Firefox showed the same problems of slow draw/redraw. Open source Drivers: With open source drivers (xf86-video-ati-6.13.2) I hadn't the same slow draw problems, but, had other problems, that, for now, make it no viable solution. I'll not discuss it here because this is another line of problems and will confuse everything. If it happens to be the only solution, I'll make another thread to discuss it. Logs and Configs: kernel .config dmesg xorg package list xorg.conf Xorg.0.log

    Read the article

  • Is it possible that solid state drives (or any faster drive) will make common applications faster even if they are cached?

    - by leladax
    I assumed that solid state drives are insignificant after, say, Firefox is fully brought up and no important disk activity after that is going on. However, I wonder if some kind of 'cached from the disk to the CPU' activity is going on that may make solid state drives (or any faster drive) better. Then again, I suspect that may be depended only on the Bus (or some kind of cache memory drives have). Hrm..

    Read the article

  • Linux servers going into Halt when pressing Control-D in putty or exit in the shell

    - by Itai Ganot
    Since today at noon, there's a number of Linux CentOS servers which are going to Halt whenever i type exit or use Control-D to close the putty window. Did anyone encounter this weird behavior before? I've checked the aliases list on the servers and there is no alias regarding halt command. After the server came online i've checked the history and saw a "logout" command there but nothing which is related to Halt. At first, i thought it happens only from my computer but later i realized that it happens to everyone which types exit, logout or control+d. 2 of these server are our main iptables firewalls and so it's super critical, your assistance is much appreciated. It looks like that, and it only happens on servers with active IPTables: [root@srv1 bin]# ssh srv2 root@srv2's password: Last login: Sun Nov 11 17:19:41 2012 from 192.168.12.98 [root@srv2 ~]# vim /etc/crontab [root@srv2 ~]# exit logout Broadcast message from root (pts/1) (Tue Nov 13 10:44:04 2012): The system is going down for system halt NOW! Connection to srv2 closed. [root@srv1 bin]# In my troubleshooting steps i came across the command strace, and so i've opened two bash windows to one of the problematic server and i used strace -p PID_of_bash. When i typed in exit in the first shell it did go to halt, attached is the strace output, if you can check it out and tell me if you see anything suspicious i'd be more than thankful. RER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 write(2, "There are stopped jobs.\n", 24) = 24 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23717 setpgid(23717, 23717) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23717]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23717 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da984, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, TIOCSWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 ioctl(0, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig -icanon -echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [INT QUIT ALRM TSTP TTIN TTOU], [], 8) = 0 rt_sigaction(SIGINT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGWINCH, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "[root@g2-lga ~]# ", 17) = 17 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "e", 1) = 1 write(2, "e", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "x", 1) = 1 write(2, "x", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "i", 1) = 1 write(2, "i", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "t", 1) = 1 write(2, "t", 1) = 1 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 read(0, "\r", 1) = 1 write(2, "\n", 1) = 1 rt_sigprocmask(SIG_BLOCK, [INT], [], 8) = 0 ioctl(0, SNDCTL_TMR_STOP or TCSETSW, {B38400 opost isig icanon echo ...}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTERM, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGQUIT, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGALRM, {0x4484f0, [HUP INT ILL TRAP ABRT BUS FPE USR1 SEGV USR2 PIPE ALRM TERM XCPU XFSZ VTALRM SYS], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c450, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTSTP, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTOU, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGTTIN, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x1, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 rt_sigaction(SIGWINCH, {0x448370, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x47c410, [], SA_RESTORER|SA_RESTART, 0x2b0e45a8f2f0}, 8) = 0 socket(PF_NETLINK, SOCK_RAW, 9) = 3 sendmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(2)=[{"\25\0\0\0d\4\1\0\0\0\0\0\0\0\0\0", 16}, {"exit\0", 5}], msg_controllen=0, msg_flags=0}, 0) = 21 close(3) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 write(2, "logout\n", 7) = 7 open("/root/.bash_logout", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=24, ...}) = 0 read(3, "# ~/.bash_logout\n\nclear\n", 24) = 24 close(3) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0 stat(".", {st_mode=S_IFDIR|0750, st_size=12288, ...}) = 0 stat("/usr/kerberos/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/kerberos/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/local/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/bin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/sbin/clear", 0x7fff395da960) = -1 ENOENT (No such file or directory) stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 stat("/usr/bin/clear", {st_mode=S_IFREG|0755, st_size=12712, ...}) = 0 access("/usr/bin/clear", X_OK) = 0 access("/usr/bin/clear", R_OK) = 0 rt_sigprocmask(SIG_BLOCK, [INT CHLD], [], 8) = 0 pipe([3, 4]) = 0 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x2b0e45db6fe0) = 23726 setpgid(23726, 23726) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 close(3) = 0 close(4) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [23726]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0 wait4(-1, Broadcast message from root (pts/0) (Wed Nov 14 12:41:44 2012): The system is going down for system halt NOW! [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], WSTOPPED|WCONTINUED, NULL) = 23726 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [CHLD], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [CHLD], NULL, 8) = 0 ioctl(255, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(255, TIOCGWINSZ, {ws_row=53, ws_col=211, ws_xpixel=0, ws_ypixel=0}) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395da634, WNOHANG|WSTOPPED|WCONTINUED, NULL) = 0 rt_sigreturn(0x11) = 0 open("/etc/bash.bash_logout", O_RDONLY) = -1 ENOENT (No such file or directory) rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 rt_sigaction(SIGINT, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, {0x448700, [], SA_RESTORER, 0x2b0e45a8f2f0}, 8) = 0 stat("/root/.bash_history", {st_mode=S_IFREG|0600, st_size=28900, ...}) = 0 open("/root/.bash_history", O_WRONLY|O_APPEND) = 3 write(3, "cd /etc/profile.d/\nls\nls -alrt\ng"..., 1120) = 1120 close(3) = 0 open("/root/.bash_history", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0600, st_size=30020, ...}) = 0 read(3, "history \nping g1-lga\nping g1-lga"..., 30020) = 30020 close(3) = 0 open("/root/.bash_history", O_WRONLY|O_TRUNC) = 3 write(3, "grep \"216.18\" *\nhistory \nexit\nvi"..., 27609) = 27609 close(3) = 0 kill(4294965658, SIGTERM) = 0 kill(4294965658, SIGCONT) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, [{WIFSIGNALED(s) && WTERMSIG(s) == SIGTERM}], WNOHANG|WSTOPPED|WCONTINUED, NULL) = 1638 wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0x11) = 0 --- SIGCHLD (Child exited) @ 0 (0) --- wait4(-1, 0x7fff395dac34, WNOHANG|WSTOPPED|WCONTINUED, NULL) = -1 ECHILD (No child processes) rt_sigreturn(0xffffffffffffffff) = 0 rt_sigprocmask(SIG_BLOCK, [CHLD TSTP TTIN TTOU], [], 8) = 0 ioctl(255, TIOCSPGRP, [20458]) = 0 rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0 setpgid(0, 20458) = -1 EPERM (Operation not permitted) exit_group(1) = ? Process 20458 detached [root@g2-lga ~]#

    Read the article

  • CPU Test Similar to Memtest?

    - by Nick Whaley
    I need an easy way to do system stability tests. I have come to rely on Prime95 which does a fantastic job of proving stability (or instability) very quickly; but it requires an OS installed. I would like something like Prime95 that stresses both CPU and RAM (maybe PCI-Ex bus also?) but runs in a nice bootable binary like Memtest86+ does, so I can boot it from a thumbdrive. Does such a thing exist?

    Read the article

  • Do these 3 crashes have something in common?

    - by David U
    I'm running OS X 10.6.8 on a Mac Mini. I tried to install 3 applications today and all 3 installations failed. I am wondering if the failures have something in common. First I installed GraphViz. The installation succeeded, but when I try to open any .dot file, I get a dialog that says GraphViz has quit unexpectedly. Next I installed Doxygen. It installed, but when I try to launch it I get a dialog that tells me Doxywizard quit unexpectedly. After some googling I thought perhaps my system lacked QT, and that was the problem. I downloaded the Qt 4.8.4 packages and installed them. But when I try to launch qtdemo.app, or any of the other apps that came with the qt installation, I get a dialog that says I can't open the app because it's not supported on this type of Mac. I have crash logs from GraphViz and Doxygen. They're long and I think it unnecessary to post them unless they would help someone determine my problem. Thanks Excerpt from System Log, added later: 12/13/12 5:26:21 PM [0x0-0x4f04f].com.apple.DiskImageMounter[1322] 2012-12-13 17:26:21.927 DiskImages UI Agent[1333:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:30:31 PM [0x0-0x1a01a].org.mozilla.firefox[824] [ConvConfHandler] isPreferred contentType: application/x-apple-diskimage 12/13/12 5:35:32 PM DiskImages UI Agent[1384] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 5:35:32 PM [0x0-0x5a05a].com.apple.DiskImageMounter[1376] 2012-12-13 17:35:32.988 DiskImages UI Agent[1384:903] *** -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid 12/13/12 6:07:33 PM DisplayLinkUserAgent[772] (00116500.405)-[DLDistributedNotificationCenter stream:handleEvent:] reconnected. 12/13/12 6:07:33 PM [0x0-0x6c06c].backupd-helper[1446] Not starting Time Machine backup after wake - less than 60 minutes since last backup completed. 12/13/12 6:08:43 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/BrotherPPD.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.3-Patch-2-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice-2.2.5-Intel.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/NeoOffice.pkg 12/13/12 6:08:48 PM Installer[1403] PackageKit: *** Missing bundle identifier: /Library/Receipts/PIXMA iP6000D 290.pkg 12/13/12 6:14:39 PM com.apple.launchd.peruser.501[359] ([0x0-0x70070].com.att.graphviz[2047]) Job appears to have crashed: Bus error 12/13/12 6:14:41 PM ReportCrash[2056] Saved crash report for Graphviz[2047] version 2.28 (2.28.0) to /Users/duzzell/Library/Logs/DiagnosticReports/Graphviz_2012-12-13-181441_Amun.crash 12/13/12 6:15:19 PM com.apple.launchd.peruser.501[359] ([0x0-0x74074].org.doxygen[2070]) Job appears to have crashed: Bus error 12/13/12 6:15:19 PM ReportCrash[2056] Saved crash report for Doxywizard[2070] version 1.8.2 (???) to /Users/duzzell/Library/Logs/DiagnosticReports/Doxywizard_2012-12-13-181519_Amun.crash

    Read the article

  • installation of mac 10.6.2

    - by mahesh
    hi i installed vmware workstation 7.0 in windows,and it working well.i installed mac os 10.4.8 in it as a guest it is alo working well,but while installin mac os 10.6.2 it dont installed and shows an error as "invalid front-side bus freqency 66000000 hz. disablin the cpu." please help me how to solve this and please suggest any link to easyly understand installation if mac os 10.6.2

    Read the article

  • lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

    - by bpetit
    Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

    Read the article

  • Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

    Read the article

  • Sound device doesn't work in Windows 7

    - by Alex Farber
    Device manager shows that device is properly installed: High Definition Audio Device Device type: Sound, video and game controllers Manufacter: Microsoft Location: Location 0 (Internal High Definition Audio Bus) But every program trying to play sound reports that devicce is unavailable. In Windows XP it works properly.

    Read the article

  • How should I interpret the specifications of a SSD?

    - by paulgreg
    When considering to buy a SSD, how should I interpret the different specifications of the SSD? Here are some specific things that need to be deciphered: Controller (this can affect performance and endurance more than all other factors combined) Bus Technology Form Factor (Physical Size) Capacity NAND or NOR technology Power Consumption during Read, during Write, when Idle Read/Write Burst and Sustained Throughput All of these things I would like to be explained in more detail and their actual importance in selecting an SSD.

    Read the article

  • Can only bring up one of two interfaces

    - by mstaessen
    I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

    Read the article

  • UDISKS instead of HAL

    - by MeJ
    Does anybody have some expirence with udisks, because HAL won't be longer supported on the most linux distribution, so I am thinking of to use udisks for UDI in $(hal-find-by-property --key storage.bus --string usb) do HAL_TMP=`hal-get-property --udi $UDI --key storage.removable.media_available` if [ "$HAL_TMP" = "true" ]; then HAL_DEV=$(hal-get-property --udi $UDI --key block.device) HAL_SIZE=$(hal-get-property --udi $UDI --key storage.removable.media_size) HAL_TYPE=$(hal-get-property --udi $UDI --key storage.drive_type) How do I have to adapt the above mentioned commands but use udisks instead of hal Thanks!

    Read the article

  • How many megabytes per second may I expect from a gigabit USB 2.0 network card under linux?

    - by Nakedible
    I'm interested in the actual real-word throughput attainable with an external 1000BaseT USB 2.0 network card under Linux. I have been able to attain 90 megabytes per second on a PCI-E interface, but the USB 2.0 bus has a theoretical limit of 480Mbit/s, and in practice less than 40 megabytes per second. Is the actual throughput attainable with such a card under linux 40, 30, 20, or even as low as 10 megabytes per second, eg. no better than a normal 100BaseT network card?

    Read the article

  • Can an old MacBook be upgraded to OS X Lion?

    - by itenyh
    I've just got a really old MacBook and I want to upgrade it to the latest OS version. I do not know if it supports to be upgraded, the config of this MacBook is as below: Model Name: MacBook Model Identifier: MacBook1, 1 Processor Name: Intel Core Duo Processor speed: 1.83 GHz The number of processors: 1 Total Number Of Cores: 2 L2 cache: 2 MB Memory: 1 GB Bus speed: 667 MHz Boot ROM Version: MB11.006 If I increase the memory, can I upgrade it?

    Read the article

  • I just don't know what it is, tried everything, IE 7 bug

    - by Emmy
    Has anyone seen this bug? I have a sidebar with a ul nav background image for the hover state, floated right, looks great in all browsers. Then...I added another div underneath it for ad space. inside, there's an anchored image. That image tucks underneath the background image of the nav, but only in IE7 (i abandoned trying to please ie6). So I took it out of the sidebar, played with float, display,height hacks, but nothing works I can declare a large top margin with some more top padding do get it to clear but it breaks the design. i even tried creating a div called clear and put a top margin there. so it displays with this huge gap in chrome, FF, safari but this tiny space between in IE. i even tried creating a div called clear and put a top margin there. I have spent hours trying to find someone with the same problem but to no avail. Any suggestions? Here's a code snippet: <div id="leftsidebar"> <div id="leftnav"> <ul class="slidenav" id="sidenav"> <li id="overview" class="inactive"> <a href="expat.html">expat lifestyle</a> </li> <li id="tips" class="inactive"> <a href="traveltips.html">travel tips</a> </li> <li id="bts" class="inactive"> <a href="bts-mrt.html">bts/mrt</a> </li> <li id="bus" class="inactive"> <a href="bus.html">bus system</a> </li> <li id="van" class="inactive"> <a href="taxi.html">vans/taxis</a> </li> <li id="boat" class="inactive"> <a href="klong.html">boats/klong</a> </li> <li id="boat" class="inactive"> <a href="klong.html">boats/klong</a> </li> <li id="tuk" class="inactive"> <a href="tuk.html">tuk-tuks</a> </li> <li id="train" class="inactive"> <a href="train.html">trains</a> </li> <li id="airport" class="inactive"> <a href="airport.html">int'l airport</a> </li> <li id="dangers" class="inactive"> <a href="dangers.html">dangers</a> </li> <li id="fun" class="inactive"> <a href="fun.html">fun places</a> </li> <li id="shopping" class="inactive"> <a href="shopping.html">shopping</a> </li> </ul> </div> </div> <div id="store"> <a href="astore.amazon.com/ten044-20"; title="Shop WIB store"> <img src="images/WIBstore.png" height="70" width="200" border="none"/> </a> </div> the corresponding CSS: #leftsidebar { float:right; width: 210px; margin: 40px 0 0 0; padding: 0; height:1%; } #store { margin: 20px 0px 0 0px; padding: 0 10px 0 0; float: right; height: 1%; display: inline; } And an image:

    Read the article

  • Bluez Installation - configuration error for DBUS 1.6

    - by padma_uma
    I am trying to install bluez 5.2 libraries on Ubuntu 12.04. while running ./configure, I received error for GLib2.0, I was able to resolve by using sudo apt get-install for GLib2. Now I am receiving the error "configure: error: D-Bus = 1.6 is required". I have downloaded DBUS 1.8.6 and installed. but still I am receiving the same error. when checked in /etc folder i still find dbus-1. is there any installation error? Regards, Padma

    Read the article

  • No sound after video card replaced (AMD Radeon HD 7770)

    - by Sean
    Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and installed a new video card: Radeon HD 7770. After this, my sound no longer worked in ubuntu (Win7 audio still works). Everything else in ubuntu, such as video, works fine. I suspect it has something to do with the fact that the Radeon card includes sound capability. Problem Details: If I click on System Settings - Sound, the panel freezes and stops responding indefinitely. The sound volume icon at the top of the screen (by the clock) shows 3 dashes beside it "---", and an empty drop-down box shows if I click on it. (Possibly related to 1.) When I reboot my machine, I get the message: "gnome settings daemon not responding". I have to force the reboot. I reinstalled ubunbu (perserving my home directory) and the problem persists. Diagnostics info: Following procedure outlined here: https://help.ubuntu.com/community/SoundTroubleshooting The following is a list of terminal commands, and their output: $ aplay -l List of PLAYBACK Hardware Devices There is no listing beyond that, and the command freezes until I hit control-c $ lspci -v | grep -A7 -i "audio" 00:0f.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2) Subsystem: Dell Device 0224 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at dfff0000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 Subsystem: Diamond Multimedia Systems Device aab0 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at dfefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 03:0a.0 Audio device: Creative Labs SB X-Fi Subsystem: Creative Labs Device 6002 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dbff4000 (32-bit, non-prefetchable) [size=16K] Memory at dbc00000 (64-bit, non-prefetchable) [size=2M] Memory at d4000000 (64-bit, non-prefetchable) [size=64M] I/O ports at 8c00 [size=32] Capabilities: <access denied> Notice the Diamond Multimedia Systems Device - that seems to be my video card sound. My video card is Diamond multimedia. Also there's the weird NVIDIA device in there. That must either be a remnant of my now removed NVIDIA graphics card, or else some kind of on-board thing. Not sure which. $ killall pulseaudio This allows me to open system settings - sound. But the "Test Sound" button makes no sound And the output volume + mute controls are greyed / disabled at 0 volume. It also allows me to click on the sound control in the "task bar" (beside the clock), and a volume slider drops down, but it is disabled / greyed at 0 volume. $ find /lib/modules/uname -r | grep snd /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-88pm860x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic3x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8900.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8978.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320dac33.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9090.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sta32x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98088.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9850.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-rt5631.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8903.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8580.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8523.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9877.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ads117x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8955.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8804.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sgtl5000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8750.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm2000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic32x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4642.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad193x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8753.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4535.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8985.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8350.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-dfbmcs320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs42l51.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic26.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8737.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda1380.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8776.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8995.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tpa6130a2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8727.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm5100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8991.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8510.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-jz4740-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8400.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-lm4857.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8960.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-alc5623.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4270.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic23.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8993.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8961.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8940.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda134x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad1836.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8994.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8782.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4271.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8974.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8983.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8962.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4641.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm-hubs.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8971.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8996.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wl1273.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adav80x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-spdif.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-pcm3008.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cx20442.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4671.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8711.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad73311.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98095.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9081.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8741.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm1250-ev1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8988.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adau1373.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8731.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-l3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ssm2602.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-da7210.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4104.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8904.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8728.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8770.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8990.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/snd-soc-core.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/emux/snd-emux-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/snd-util-mem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hrtimer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-pcm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-rawmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/oss/snd-mixer-oss.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-page-alloc.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-device.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-event.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-emul.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-timer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/vx/snd-vxpocket.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usbmidi-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-us122l.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usb-audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/misc/snd-ua101.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-portman2x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-serial-u16550.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mts64.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mtpav.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/vx/snd-vx-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-aloop.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/pcsp/snd-pcsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-speakers.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-isight.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-tea6330t.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4113.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-pt2258.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4117.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4114.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-cs8427.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-i2c.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/korg1212/snd-korg1212.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8830.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8820.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8810.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/aw2/snd-aw2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sis7019.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1371.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/vx222/snd-vx222.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1968.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs4281.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sonicvibes.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-maestro3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1938.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-fm801.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/nm256/snd-nm256.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-analog.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-via.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0132.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-si3054.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/riptide/snd-riptide.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1370.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als4000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0m.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ca0106/snd-ca0106.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs5530.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme32.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ymfpci/snd-ymfpci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ctxfi/snd-ctxfi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-azt3328.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs46xx/snd-cs46xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lx6464es/snd-lx6464es.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1712.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1724.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/mixart/snd-mixart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ali5451/snd-ali5451.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lola/snd-lola.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-virtuoso.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/pcxhr/snd-pcxhr.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigo.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-echo3g.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mona.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoiox.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodjx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodj.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cmipci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/asihpi/snd-asihpi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ad1889.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-rme9652.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdspm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/trident/snd-trident.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als300.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-bt87x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme96.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-miro.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti93x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusextreme.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusmax.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave-stb.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gus-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusclassic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-emu8000-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sbawe.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb-common.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-csp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-jazz16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-es18xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-azt2320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-cmi8330.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-als100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-classic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-pinnacle.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4236.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-adlib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1848/snd-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1816a/snd-ad1816a.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt1605.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt2316.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wavefront/snd-wavefront.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wss/snd-wss-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sc6000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sscape.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-opl3sa2.ko

    Read the article

  • SyncToBlog #12 Windows Azure and Cloud Links

    - by Eric Nelson
    Some more “syncing to paper” :) Steve Marx wrote a very interesting article about using Hosted Web Core in an Azure Worker Role. Hosted Web Core is a new feature in IIS 7 that enables developers to create applications that load the core IIS functionality. Wade Wegner is a new Technical Evangelist for Windows Azure platform AppFabric Example from Wade (and how I found him) Host WCF Services in IIS with Service Bus Endpoints Google and vmware “get engaged” over cloud http://googlecode.blogspot.com/2010/05/enabling-cloud-portability-with-google.html A new cloud comparison site – slick but limited coverage (it is not at Azure level, rather BPOS level) www.cloudhypermarket.com  The Rise of NoSQL Database (devx free registration required) Moe Khosravy talks about Codename "Dallas"  to my colleague David G (14min video) New videos Calculating the cost of Azure and Calculating the cost of SQL Azure Related Links: Previous SyncToBlog posts My delicious bookmarks

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >