Search Results

Search found 786 results on 32 pages for 'carpal tunnel'.

Page 31/32 | < Previous Page | 27 28 29 30 31 32  | Next Page >

• How to Eliminate Tape Backup and Off-site Storage Service?

  - by Daniel Lucas

  PLEASE READ UPDATE AT THE BOTTOM. THANKS! ;) Environment Info (all Windows): 2 sites 30 servers site #1 (3TB of backup data) 5 servers site #2 (1TB of backup data) MPLS backbone tunnel connecting site #1 and site #2 Current Backup Process: Online Backup (disk-to-disk) Site #1 has a server running Symantec Backup Exec 12.5 with four 1TB USB 2.0 disks. BE jobs for full backups run nightly on all servers in site #1 to these disks. Site #2 backs up to a central file server there using software they already had when we purchased them. A BE job pulls that data nightly to site #1 and stores them on said disks. Off-site Backup (tape) Connected to our backup server is a tape drive. BE backs up the external disks to tape once a week which gets picked up by our off-site storage company. Obviously we rotate two tape libraries, one is always here and one is always there. Requirements: Eliminate the need for tape and off-site storage service by doing disk-to-disk at each site and replicating site #1 to site #2 and vice versa. Software based solution as hardware options have been too pricey (ie, SonicWall, Arkeia). Agents for Exchange, SharePoint, and SQL. Some Ideas So Far: Storage DroboPro at each site with an initial 8TB of storage (these are expandable up to 16TB at present). I like these because they are rackmountable, allow disparate drives, and have iSCSI interfaces. They are relatively cheap too. Software Symantec Backup Exec 12.5 already has all the agents and licenses we need. I'd like to keep using it unless there is a better solution, similarly priced, that does everything BE does plus deduplication and replication. Server Because there is no more need for a SCSI adapter (for tape drive) we are going to virtualize our backup server as it is currently the only physical machine save for SQL boxes. Problems: When replicating between sites we want as little data as possible to go across the pipe. There is no deduplication or compression in what I have laid out here so far. The files being replicated are BE's virtual tape libraries from our disk-to-disk backup. Because of this each of those huge files will go across the wire every week because they change every day. And Finally, the Question: Is there any software out there that does deduplication, or at least compression, to handle just our site-to-site replication? Or, looking at our setup, is there any other solution that I am missing that might be cheaper, faster, better? Thanks. Sorry so long. UPDATE 2: I've set a bounty on this question to get it more attention. I'm looking for software that will handle replication of data between two sites using the least amount of data possible (either compression, deduplication, or some other method). Something similar to rsync would work but it needs to be native to Windows and not a port involving shenanigans to get up and running. Prefer a GUI based product and I don't mind shelling out a few bones if it works. Please, answers that meet the above criteria only. If you don't think one exists or if you think I'm being to restrictive keep it to yourself. If after seven days there is no answer at all, so be it. Thanks again everyone. UPDATE 2: I really appreciate everyone coming forward with suggestions. There is no way for me to try all of these before the bounty expires. For now I'm going to let this bounty run out and whoever has the most votes will get the 100 rep points. Thanks again!

  Read the article

• iCloud stuff stops working while connected to OpenVPN

  - by Taco Bob

  I have a fairly simple OpenVPN setup on an OpenVZ VPS with Ubuntu 11.10. Client is the Viscosity client on Mac OS X 10.8.2, and after some testing, we can rule out the client as being part of the problem. Everything has been working fine except for Apple's iCloud stuff. Web surfing, email, FTP, NNTP, and Skype are all working as expected. It's ONLY the iCloud services that cease to function. If I connect to the VPN, iCloud stuff stops working. I no longer get anything in Messages, Calendar items don't get updated, and Notifications stop working. If I disconnect, the iCloud stuff all starts working. Connect again, iCloud stops working. Here's the server.conf: status openvpn-status.log log /var/log/openvpn.log verb 4 port 1194 proto udp dev tun ca /etc/openvpn/ca.crt cert /etc/openvpn/server.crt key /etc/openvpn/server.key dh /etc/openvpn/dh1024.pem server 10.9.8.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "redirect-gateway def1" push “dhcp-option DNS 10.9.8.1? keepalive 10 120 duplicate-cn cipher BF-CBC comp-lzo user nobody group nogroup persist-key persist-tun tun-mtu 1500 mssfix 1400 I'm using iptables in a script, and it's also fairly simplistic. iptables -F iptables -t nat -F iptables -t mangle -F iptables -A FORWARD -i tun0 -o venet0 -j ACCEPT iptables -A FORWARD -i venet0 -o tun0 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -p udp --dport 1194 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source <server's public ip> echo 1 > /proc/sys/net/ipv4/ip_forward I tried forwarding ports as well, with no success. iptables -A FORWARD -p tcp -d 10.9.8.0/24 --dport 5222:5230 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 5222:5230 -j DNAT --to-destination 10.9.8.6 I am also sometimes behind a double-NAT situation that I have no control over. Client -> work VPN -> my OpenVPN box -> Internet. Client -> Airport Express -> ISP (which is doing NAT) -> my OpenVPN box -> Internet. Those two situations are just the fact of life where I am, and I cannot change them. I do have full control over my client and the OpenVPN server. I am completely out of ideas. I have posted a similar query at the OpenVPN forums, but it hasn't posted yet and seems to be in their moderation queue still. Tried on freenode irc channels, but nobody is awake, so here I am. I have Googled extensively for this, and can find nothing that is related. Help me get iCloud stuff working again! (I tried serverfault, it was closed as off-topic. I'm trying here and the Unix site as well. Here because it's a more general audience that might know more about OpenVPN based on the number of questions I see asked about it) EDIT: -I have also tried upgrading to Version: 2.3-beta1-debian0 - issue persists. -Removed all iptables rules except for the ones that flush -left this rule:iptables -t nat -A POSTROUTING -s 10.9.8.0/24 -j SNAT --to-source (server ip) -added iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT still, nothing works. I can see traffic in tcpdump on the server if i watch the tunnel: 20:03:48.702835 IP nk11p01st-courier105-bz.push.apple.com.5223 10.9.8.6.60772: Flags [F.], seq 2635, ack 1218, win 76, options [nop,nop,TS val 914984811 ecr 745921298], length 0 20:03:48.911244 IP 10.9.8.6.60772 nk11p01st-courier105-bz.push.apple.com.5223: Flags [R], seq 3621143451, win 0, length 0 But still, no push messages/notifications are ever delivered. :/ EDIT: * Further testing indicates that it might actually be the client after all.

  Read the article

• How to use a different Ethernet connection

  - by SteveC

  I'm running a virtual machine at home which has a VPN connection to our main office, but I also want to connect to a share on another machine at home. When I check with IPCONFIG I can see two ethernet connections ... my work VPN ... Ethernet adapter Local Area Connection* 11: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : XXX.XXX.XXX.XXX Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.XXX.XXX.XXX and home local ... Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : 192.168.1.70 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : What's weird is when I've been working before with a plugged-in ethernet cable I've not had any problem getting to the share? I can PING the other machine, but I can't access the share at ... \\othermachine\c$ I tried 'TRACERT` but that disappears off to the work network and eventually gets back to the local other machine after a few time-outs Is there anyway to "force" the connection to stay local ? UPDATE: the VPN is AEP SSL Tunnel

  Read the article

• Can't get IPv6 address using radvd on wireless interface on windows, wired works fine.

  - by AndrejaKo

  I set up my router to use OpenWRT and set it up to use IPv6 using a tunnel form SixXs. I'm having problems with stateless autoconfiguration using radvd. On my computer, wired connection can get its IPv6 address fine, but wireless can't. After spending some time on OpenWRT forums, I'm pretty much sure now that router is set up fine and that the problem is with my windows settings. Also, I do not have any problems getting IPv6 address on openSUSE 11.3. So what should I do to solve this and what information should I post? Here's radvdump output for wired interface: interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition Here's radvdump output for wireless interface: # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition

  Read the article

• Why am I unable to telnet to a local port that has a listening service?

  - by Skip Huffman

  I suspect this is either a very simple question, or a very complex one. I have a headless server running ubuntu 10.04 that I can ssh into. I have full root access to the system. I am trying to set up an ssh tunnel to allow me to vnc to the system (but that isn't my question. I have vnc running on port 5903, here is the netstat output for that: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:5903 0.0.0.0:* LISTEN 7173/Xtightvnc tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 465/sshd But when I try to telnet to that port, from within the same system and login, I get unable to connect errors # telnet localhost 5903 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out I am able to telnet to port 22 (as a verification) ~# telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 I have tried to open up any possible ports using ufw (probably clumsy fashion) # ufw status numbered Status: active To Action From -- ------ ---- [ 1] 5903 ALLOW IN Anywhere [ 2] 22 ALLOW IN Anywhere What else might be blocking this connection locally? Thank you, Edit: The only reference to port 5903 in iptable -L -n is this: Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5903 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5903 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080 I can post the whole output if that will be useful. hosts.allow and hosts.deny both contain only comments. Re-Edit: Some other questions pointed me to nmap, so I ran a portscan through that utility: # nmap -v -sT localhost -p1-65535 Starting Nmap 5.00 ( http://nmap.org ) at 2011-11-09 09:58 PST NSE: Loaded 0 scripts for scanning. Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1. Initiating Connect Scan at 09:58 Scanning localhost (127.0.0.1) [65535 ports] Discovered open port 22/tcp on 127.0.0.1 Connect Scan Timing: About 18.56% done; ETC: 10:01 (0:02:16 remaining) Connect Scan Timing: About 44.35% done; ETC: 10:00 (0:01:17 remaining) Completed Connect Scan at 10:00, 112.36s elapsed (65535 total ports) Host localhost (127.0.0.1) is up (0.00s latency). Interesting ports on localhost (127.0.0.1): Not shown: 65533 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 112.43 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) I think this shows that 5903 is blocked somehow. Which I pretty much knew. The question remains what is blocking it and how to modify. Re-re-edit: To check Paul Lathrop's suggested answer, I first verified my ip address with ifconfig: eth0 Link encap:Ethernet HWaddr 02:16:3e:42:28:8f inet addr:10.0.10.3 Bcast:10.0.10.255 Mask:255.255.255.0 Then tried to telnet to 5903 from that address: # telnet 10.0.10.3 5903 Trying 10.0.10.3... telnet: Unable to connect to remote host: Connection timed out No luck. Re-re-re-re-edit: Ok, I think I have isolated it a bit to vncserver, not the firewall, darn it. I shut off vncserver and had netcat listen on port 5903. My vnc client then was able to establish a connnection and sit and wait for a response. Looks like I should be chasing a vnc problem. At least that is progress Thanks for the help

  Read the article

• how to remove obsolete device and network entries? Device manager "uninstall" option has no effect

  - by Gizmo

  I am trying to remove a few "obsolete" things which annoy me (because I like to have everything cleen, working and not interferring with each other, fresh, etc..). I tried looking for solutions without any help, so here I am to ask. My first part is about removing obsolete networks, let me explain by showing the ipconfig output: C:\windows\system32>ipconfig Windows IP Configuration Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Ethernet adapter LAN: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wi-Fi: Connection-specific DNS Suffix . : home Link-local IPv6 Address . . . . . : fe80::c129:8d57:bbd1:3564%10 IPv4 Address. . . . . . . . . . . : 192.168.2.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.254 Tunnel adapter isatap.home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : home C:\windows\system32> Specificalyy the first two adapter entries annoy me because the adapters are not visible in the network connection menu (invisible folder / file visibility set to "show"): And here is the second problem altogether with the first one: No matter what I click/do, Uninstall option has no effect on the multiplexor driver. (bridging stuff, right?) I really want to remove the Wireless LAN adapter Local Area Connection entries and the adapter multiplexor stuff but it's impossible? Why is this? How can I remove them anyway?

  Read the article

• PPTP connection disconnect

  - by Vladimir Franciz S. Blando

  My pptp connection wont stay connected, it will disconnect in less than a minute here are some relevant log entries May 31 13:32:31 localhost NetworkManager[931]: <info> Starting VPN service 'pptp'... May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 15216 May 31 13:32:31 localhost NetworkManager[931]: <info> VPN service 'pptp' appeared; activating connections May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: init (1) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN plugin state changed: starting (3) May 31 13:32:31 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (Connect) reply received. May 31 13:32:31 localhost pppd[15221]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. May 31 13:32:31 localhost pppd[15221]: pppd 2.4.5 started by root, uid 0 May 31 13:32:31 localhost pptp[15224]: nm-pptp-service-15216 log[main:pptp.c:314]: The synchronous pptp option is NOT activated May 31 13:32:31 localhost pppd[15221]: Using interface ppp0 May 31 13:32:31 localhost pppd[15221]: Connect: ppp0 <--> /dev/pts/5 May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) May 31 13:32:31 localhost NetworkManager[931]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply May 31 13:32:32 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established. May 31 13:32:33 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply. May 31 13:32:34 localhost pptp[15235]: nm-pptp-service-15216 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 1536). May 31 13:32:37 localhost pppd[15221]: CHAP authentication succeeded May 31 13:32:37 localhost kernel: [54007.078553] PPP MPPE Compression module registered May 31 13:32:40 localhost pppd[15221]: MPPE 128-bit stateless compression enabled May 31 13:32:42 localhost pppd[15221]: local IP address 10.100.0.52 May 31 13:32:42 localhost pppd[15221]: remote IP address 10.100.0.1 May 31 13:32:42 localhost pppd[15221]: primary DNS address 4.2.2.1 May 31 13:32:42 localhost pppd[15221]: secondary DNS address 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) reply received. May 31 13:32:42 localhost NetworkManager[931]: <info> VPN Gateway: 103.28.219.2 May 31 13:32:42 localhost NetworkManager[931]: <info> Tunnel Device: ppp0 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Address: 10.100.0.52 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Prefix: 32 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 Point-to-Point Address: 10.100.0.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Maximum Segment Size (MSS): 0 May 31 13:32:42 localhost NetworkManager[931]: <info> Forbid Default Route: no May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 4.2.2.1 May 31 13:32:42 localhost NetworkManager[931]: <info> Internal IP4 DNS: 255.255.255.255 May 31 13:32:42 localhost NetworkManager[931]: <info> DNS Domain: '(none)' May 31 13:32:43 localhost dnsmasq[2127]: exiting on receipt of SIGTERM May 31 13:32:43 localhost NetworkManager[931]: <info> DNS: starting dnsmasq... May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dnsmasq[15290]: error at line 2 of /var/run/nm-dns-dnsmasq.conf May 31 13:32:43 localhost dnsmasq[15290]: FAILED to start up May 31 13:32:43 localhost NetworkManager[931]: <info> VPN connection 'Dynalabs' (IP Config Get) complete. May 31 13:32:43 localhost NetworkManager[931]: <info> Policy set 'Dynalabs' (ppp0) as default for IPv4 routing and DNS. May 31 13:32:43 localhost NetworkManager[931]: <info> VPN plugin state changed: started (4) May 31 13:32:43 localhost NetworkManager[931]: <warn> dnsmasq exited with error: Configuration problem (1) May 31 13:32:43 localhost NetworkManager[931]: <info> (ppp0): writing resolv.conf to /sbin/resolvconf May 31 13:32:43 localhost dbus[872]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) May 31 13:32:43 localhost dbus[872]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' May 31 13:33:00 localhost ntpdate[15370]: step time server 91.189.94.4 offset -1.110301 sec May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd6d6 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x93aa May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xcc83 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2031 May 31 13:33:21 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x13d4 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x5b11 May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x414b May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f5f May 31 13:33:22 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe9ff May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8e20 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8f0 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf166 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x36e6 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xdd19 May 31 13:33:23 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xda26 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xac5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x53a5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x507e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1dc5 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf87b May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2f27 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd10c May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66ef May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa294 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb15 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x52a2 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd863 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8a96 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xde19 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9763 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xb23 May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x83ca May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x964e May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe8ae May 31 13:33:24 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf614 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x9b1 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf086 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbff4 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x66c5 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xe42 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf295 May 31 13:33:25 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x86fe May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3bc1 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xbaad May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x88b5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xd7a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x30d5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x2d8f May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x3933 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x8d42 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x4b4 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xa205 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x7cc5 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x1b6a May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0xf004 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x21b6 May 31 13:33:26 localhost pppd[15221]: Protocol-Reject for unsupported protocol 0x51eb

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service

  - by Elton Stoneman

  We're in the process of delivering an enabling project to expose on-premise WCF services securely to Internet consumers. The Azure Service Bus Relay is doing the clever stuff, we register our on-premise service with Azure, consumers call into our .servicebus.windows.net namespace, and their requests are relayed and serviced on-premise. In theory it's all wonderfully simple; by using the relay we get lots of protocol options, free HTTPS and load balancing, and by integrating to ACS we get plenty of security options. Part of our delivery is a suite of sample consumers for the service - .NET, jQuery, PHP - and this set of posts will cover setting up the service and the consumers. Part 1: Exposing the on-premise service In theory, this is ultra-straightforward. In practice, and on a dev laptop it is - but in a corporate network with firewalls and proxies, it isn't, so we'll walkthrough some of the pitfalls. Note that I'm using the "old" Azure portal which will soon be out of date, but the new shiny portal should have the same steps available and be easier to use. We start with a simple WCF service which takes a string as input, reverses the string and returns it. The Part 1 version of the code is on GitHub here: on GitHub here: IPASBR Part 1. Configuring Azure Service Bus Start by logging into the Azure portal and registering a Service Bus namespace which will be our endpoint in the cloud. Give it a globally unique name, set it up somewhere near you (if you’re in Europe, remember Europe (North) is Ireland, and Europe (West) is the Netherlands), and  enable ACS integration by ticking "Access Control" as a service: Authenticating and authorizing to ACS When we try to register our on-premise service as a listener for the Service Bus endpoint, we need to supply credentials, which means only trusted service providers can act as listeners. We can use the default "owner" credentials, but that has admin permissions so a dedicated service account is better (Neil Mackenzie has a good post On Not Using owner with the Azure AppFabric Service Bus with lots of permission details). Click on "Access Control Service" for the namespace, navigate to Service Identities and add a new one. Give the new account a sensible name and description: Let ACS generate a symmetric key for you (this will be the shared secret we use in the on-premise service to authenticate as a listener), but be sure to set the expiration date to something usable. The portal defaults to expiring new identities after 1 year - but when your year is up *your identity will expire without warning* and everything will stop working. In production, you'll need governance to manage identity expiration and a process to make sure you renew identities and roll new keys regularly. The new service identity needs to be authorized to listen on the service bus endpoint. This is done through claim mapping in ACS - we'll set up a rule that says if the nameidentifier in the input claims has the value serviceProvider, in the output we'll have an action claim with the value Listen. In the ACS portal you'll see that there is already a Relying Party Application set up for ServiceBus, which has a Default rule group. Edit the rule group and click Add to add this new rule: The values to use are: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: serviceProvider Output claim type: net.windows.servicebus.action Output claim value: Listen When your service namespace and identity are set up, open the Part 1 solution and put your own namespace, service identity name and secret key into the file AzureConnectionDetails.xml in Solution Items, e.g: <azure namespace="sixeyed-ipasbr">    <!-- ACS credentials for the listening service (Part1):-->   <service identityName="serviceProvider"            symmetricKey="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>  </azure> Build the solution, and the T4 template will generate the Web.config for the service project with your Azure details in the transportClientEndpointBehavior:           <behavior name="SharedSecret">             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> , and your service namespace in the Azure endpoint:         <!-- Azure Service Bus endpoints -->          <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                   binding="netTcpRelayBinding"                   contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> The sample project is hosted in IIS, but it won't register with Azure until the service is activated. Typically you'd install AppFabric 1.1 for Widnows Server and set the service to auto-start in IIS, but for dev just navigate to the local REST URL, which will activate the service and register it with Azure. Testing the service locally As well as an Azure endpoint, the service has a WebHttpBinding for local REST access:         <!-- local REST endpoint for internal use -->         <endpoint address="rest"                   binding="webHttpBinding"                   behaviorConfiguration="RESTBehavior"                   contract="Sixeyed.Ipasbr.Services.IFormatService" /> Build the service, then navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 - and you should see the reversed string response: If your network allows it, you'll get the expected response as before, but in the background your service will also be listening in the cloud. Good stuff! Who needs network security? Onto the next post for consuming the service with the netTcpRelayBinding.  Setting up network access to Azure But, if you get an error, it's because your network is secured and it's doing something to stop the relay working. The Service Bus relay bindings try to use direct TCP connections to Azure, so if ports 9350-9354 are available *outbound*, then the relay will run through them. If not, the binding steps down to standard HTTP, and issues a CONNECT across port 443 or 80 to set up a tunnel for the relay. If your network security guys are doing their job, the first option will be blocked by the firewall, and the second option will be blocked by the proxy, so you'll get this error: System.ServiceModel.CommunicationException: Unable to reach sixeyed-ipasbr.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443) - and that will probably be the start of lots of discussions. Network guys don't really like giving servers special permissions for the web proxy, and they really don't like opening ports, so they'll need to be convinced about this. The resolution in our case was to put up a dedicated box in a DMZ, tinker with the firewall and the proxy until we got a relay connection working, then run some traffic which the the network guys monitored to do a security assessment afterwards. Along the way we hit a few more issues, diagnosed mainly with Fiddler and Wireshark: System.Net.ProtocolViolationException: Chunked encoding upload is not supported on the HTTP/1.0 protocol - this means the TCP ports are not available, so Azure tries to relay messaging traffic across HTTP. The service can access the endpoint, but the proxy is downgrading traffic to HTTP 1.0, which does not support tunneling, so Azure can’t make its connection. We were using the Squid proxy, version 2.6. The Squid project is incrementally adding HTTP 1.1 support, but there's no definitive list of what's supported in what version (here are some hints). System.ServiceModel.Security.SecurityNegotiationException: The X.509 certificate CN=servicebus.windows.net chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. The evocation function was unable to check revocation because the revocation server was offline. - by this point we'd given up on the HTTP proxy and opened the TCP ports. We got this error when the relay binding does it's authentication hop to ACS. The messaging traffic is TCP, but the control traffic still goes over HTTP, and as part of the ACS authentication the process checks with a revocation server to see if Microsoft’s ACS cert is still valid, so the proxy still needs some clearance. The service account (the IIS app pool identity) needs access to: www.public-trust.com mscrl.microsoft.com We still got this error periodically with different accounts running the app pool. We fixed that by ensuring the machine-wide proxy settings are set up, so every account uses the correct proxy: netsh winhttp set proxy proxy-server="http://proxy.x.y.z" - and you might need to run this to clear out your credential cache: certutil -urlcache * delete If your network guys end up grudgingly opening ports, they can restrict connections to the IP address range for your chosen Azure datacentre, which might make them happier - see Windows Azure Datacenter IP Ranges. After all that you've hopefully got an on-premise service listening in the cloud, which you can consume from pretty much any technology.

  Read the article

• It was a figure of speech!

  - by Ratman21

  Yesterday I posted the following as attention getter / advertisement (as well as my feelings). In the groups, (I am in) on the social networking site, LinkedIn and boy did I get responses.    I am fighting mad about (a figure of speech, really) not having a job! Look just because I am over 55 and have gray hair. It does not mean, my brain is dead or I can no longer trouble shoot a router or circuit or LAN issue. Or that I can do “IT” work at all. And I could prove this if; some one would give me at job. Come on try me for 90 days at min. wage. I know you will end up keeping me (hope fully at normal pay) around. Is any one hearing me…come on take up the challenge!     This was the responses I got.   I hear you. We just need to retrain and get our skills up to speed is all. That is what I am doing. I have not given up. Just got to stay on top of the game. Experience is on our side if we have the credentials and we are reasonable about our salaries this should not be an issue.   Already on it, going back to school and have got three certifications (CompTIA A+, Security+ and Network+. I am now studying for my CISCO CCNA certification. As to my salary, I am willing to work at very reasonable rate.   You need to re-brand yourself like a product, market and sell yourself. You need to smarten up, look and feel a million dollars, re-energize yourself, regain your confidents. Either start your own business, or re-write your CV so it stands out from the rest, get the template off the internet. Contact every recruitment agent in your town, state, country and overseas, and on the web. Apply to every job you think you could do, you may not get it but you will make a contact for your network, which may lead to a job at the end of the tunnel. Get in touch with everyone you know from past jobs. Do charity work. I maintain the IT Network, stage electrical and the Telecom equipment in my church,   Again already on it. I have email the world is seems with my resume and cover letters. So far, I have rewritten or had it rewrote, my resume and cover letters; over seven times so far. Re-energize? I never lost my energy level or my self-confidents in my work (now if could get some HR personal to see the same). I also volunteer at my church, I created and maintain the church web sit.   I share your frustration. Sucks being over 50 and looking for work. Please don't sell yourself short at min wage because the employer will think that’s your worth. Keep trying!!   I never stop trying and min wage is only for 90 days. If some one takes up the challenge. Some post asked if I am keeping up technology.   Do you keep up with the latest technology and can speak the language fluidly?   Yep to that and as to speaking it also a yep! I am a geek you know. I heard from others over the 50 year mark and younger too.   I'm with you! I keep getting told that I don't have enough experience because I just recently completed a Masters level course in Microsoft SQL Server, which gave me a project-intensive equivalent of between 2 and 3 years of experience. On top of that training, I have 19 years as an applications programmer and database administrator. I can normalize rings around experienced DBAs and churn out effective code with the best of them. But my 19 years is worthless as far as most recruiters and HR people are concerned because it is not the specific experience for which they're looking. HR AND RECRUITERS TAKE NOTE: Experience, whatever the language, translates across platforms and technology! By the way, I'm also over 55 and still have "got it"!   I never lost it and I also can work rings round younger techs.   I'm 52 and female and seem to be having the same issues. I have over 10 years experience in tech support (with a BS in CIS) and can't get hired either.   Ow, I only have an AS in computer science along with my certifications.   Keep the faith, I have been unemployed since August of 2008. I agree with you...I am willing to return to the beginning of my retail career and work myself back through the ranks, if someone will look past the grey and realize the knowledge I would bring to the table.   I also would like some one to look past the gray.   Interesting approach, volunteering to work for minimum wage for 90 days. I'm in the same situation as you, being 55 & balding w/white hair, so I know where you're coming from. I've been out of work now for a year. I'm in Michigan, where the unemployment rate is estimated to be 15% (the worst in the nation) & even though I've got 30+ years of IT experience ranging from mainframe to PC desktop support, it's difficult to even get a face-to-face interview. I had one prospective employer tell me flat out that I "didn't have the energy required for this position". Mostly I never get any feedback. All I can say is good luck & try to remain optimistic.   He said WHAT! Yes remaining optimistic is key. Along with faith in God. Then there was this (for lack of better word) jerk.   Give it up already. You were too old to work in high tech 10 years ago. Scratch that, 20 years ago! Try selling hot dogs in front of Fry's Electronics. At least you would get a chance to eat lunch with your previous colleagues....   You know funny thing on this person is that I checked out his profile. He is older than I am.

  Read the article

• How to create a virtual network with Azure Connect

  - by Herve Roggero

  If you are trying to establish a virtual network between machines located in disparate networks, you can either use VPN, Virtual Network or Azure Connect. If you want to establish a connection between machines located in Windows Azure, you should consider using the Virtual Network service. If you want to establish a connection between local machines and Virtual Machines in Windows Azure, you may be able to use your existing VPN device (assuming you have one), as long as the device is supported by Microsoft. If the VPN device you are using isn’t supported, or if you are trying to create a virtual network between machines from disparate networks (such as machines located in another cloud provider), you can use Azure Connect. This blog post explains how Azure Connect can help you create virtual networks between multiple servers in the cloud, various servers in different cloud environments, and on-premise. Note: Azure Connect is currently in Technical Preview. About Azure Connect Let’s do a quick review of Azure Connect. This technology implements an IPSec tunnel from machines to to a relay service located in the Microsoft cloud (Azure). So in essence, Azure Connect doesn’t provide a point-to-point connection between machines; the network communication is tunneled through the relay service. The relay service in turn offers a mechanism to enforce basic communication rules that you define through Groups. We will review this later. You could network two or more VMs in the Azure cloud (although you should consider using a Virtual Network if you go this route), or servers in the Azure cloud and other machines in the Amazon cloud for example, or even two or more on-premise servers located in different locations for which a direct network connection is not an option. You can place any number of machines in your topology. Azure Connect gives you great flexibility on how you want to build your virtual network across various environments. So Azure Connect makes sense when you want to: Connect machines located in different cloud providers Connect on-premise machines running in different locations Connect Azure VMs with on-premise (if you do not have a VPN device, or if your device is not supported) Connect Azure Roles (Worker Roles, Web Roles) with on-premise servers or in other cloud providers The diagram below shows you a high level network topology that involves machines in the Windows Azure cloud, other cloud providers and on-premise. You should note that the only required component in this diagram is the Relay itself. The other machines are optional (although your network is useful only if you have two or more machines involved). Relay agents are currently available in three geographic areas: US, Europe and Asia. You can change which region you want to use in the Windows Azure management portal. High Level Network Topology With Azure Connect Azure Connect Agent Azure Connect establishes a virtual network and creates virtual adapters on your machines; these virtual adapters communicate through the Relay using IPSec. This is achieved by installing an agent (the Azure Connect Agent) on all the machines you want in your network topology. However, you do not need to install the agent on Worker Roles and Web Roles; that’s because the agent is already installed for you. Any other machine, including Virtual Machines in Windows Azure, needs the agent installed.  To install the agent, simply go to your Windows Azure portal (http://windows.azure.com) and click on Networks on the bottom left panel. You will see a list of subscriptions under Connect. If you select a subscription, you will be able to click on the Install Local Endpoint icon on top. Clicking on this icon will begin the download and installation process for the agent. Activating Roles for Azure Connect As previously mentioned, you do not need to install the Azure Connect Agent on Worker Roles and Web Roles because it is already loaded. However, you do need to activate them if you want the roles to participate in your network topology. To do this, you will need to click on the Get Activation Token icon. The activation token must then be copied and placed in the configuration file of your roles. For more information on how to perform this step, visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg432964.aspx. Firewall Rules Note that specific firewall rules must exist to allow the agent to communicate through the Relay. You will need to allow TCP 443 and ICMPv6. For additional information, please visit MSDN at http://msdn.microsoft.com/en-us/library/windowsazure/gg433061.aspx. CA Certificates You can optionally require agents to sign their activation request with the Relay using a trusted certificate issued by a Certificate Authority (CA). Click on Activation Options to learn more. Groups To create your network topology you must first create a group. A group represents a logical container of endpoints (or machines) that can communicate through the Relay. You can create multiple groups allowing you to manage network communication differently. For example you could create a DEVELOPMENT group and a PRODUCTION group. To add an endpoint you must first install an agent that will create a virtual adapter on the machine on which it is installed (as discussed in the previous section). Once you have created a group and installed the agents, the machines will appear in the Windows Azure management portal and you can start assigning machines to groups. The next figure shows you that I created a group called LocalGroup and assigned two machines (both on-premise) to that group. Groups and Computers in Azure Connect As I mentioned previously you can allow these machines to establish a network connection. To do this, you must enable the Interconnected option in the group. The following diagram shows you the definition of the group. In this topology I chose to include local machines only, but I could also add worker roles and web roles in the Azure Roles section (you must first activate your roles, as discussed previously). You could also add other Groups, allowing you to manage inter-group communication. Defining a Group in Azure Connect Testing the Connection Now that my agents have been installed on my two machines, the group defined and the Interconnected option checked, I can test the connection between my machines. The next screenshot shows you that I sent a PING request to DEVLAP02 from DEVDSK02. The PING request was successful. Note however that the time is in the hundreds of milliseconds on average. That is to be expected because the machines are connecting through the Relay located in the cloud. Going through the Relay introduces an extra hop in the communication chain, so if your systems rely on high performance, you may want to conduct some basic performance tests. Sending a PING Request Through The Relay Conclusion As you can see, creating a network topology between machines using the Azure Connect service is simple. It took me less than five minutes to create the above configuration, including the time it took to install the Azure Connect agents on the two machines. The flexibility of Azure Connect allows you to create a virtual network between disparate environments, as long as your operating systems are supported by the agent. For more information on Azure Connect, visit the MSDN website at http://msdn.microsoft.com/en-us/library/windowsazure/gg432997.aspx. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting, a company specialized in cloud computing products and services. Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" from Apress and runs the Azure Florida Association (on LinkedIn: http://www.linkedin.com/groups?gid=4177626). For more information on Blue Syntax Consulting, visit www.bluesyntax.net. Special Thanks I would like thank those that helped me figure out how Azure Connect works: Marcel Meijer - http://blogs.msmvps.com/marcelmeijer/ Michael Wood - Http://www.mvwood.com Glenn Block - http://www.codebetter.com/glennblock Yves Goeleven - http://cloudshaper.wordpress.com/ Sandrino Di Mattia - http://fabriccontroller.net/ Mike Martin - http://techmike2kx.wordpress.com

  Read the article

• The True Cost of a Solution

  - by D'Arcy Lussier

  I had a Twitter chat recently with someone suggesting Oracle and SQL Server were losing out to OSS (Open Source Software) in the enterprise due to their issues with scaling or being too generic (one size fits all). I challenged that a bit, as my experience with enterprise sized clients has been different – adverse to OSS but receptive to an established vendor. The response I got was: Found it easier to influence change by showing how X can’t solve our problems or X is extremely costly to scale. Money talks. I think this is definitely the right approach for anyone pitching an alternate or alien technology as part of a solution: identify the issue, identify the solution, then present pros and cons including a cost/benefit analysis. What can happen though is we get tunnel vision and don’t present a full view of the costs associated with a solution. An “Acura”te Example (I’m so clever…) This is my dream vehicle, a Crystal Black Pearl coloured Acura MDX with the SH-AWD package! We’re a family of 4 (5 if my daughters ever get their wish of adding a dog), and I’ve always wanted a luxury type of vehicle, so this is a perfect replacement in a few years when our Rav 4 has hit the 8 – 10 year mark. MSRP – $62,890 But as we all know, that’s not *really* the cost of the vehicle. There’s taxes and fees added on, there’s the extended warranty if I choose to purchase it, there’s the finance rate that needs to be factored in… MSRP –   $62,890 Taxes –      $7,546 Warranty - $2,500 SubTotal – $72,936 Finance Charge – $ 1094.04 Grand Total – $74,030 Well! Glad we did that exercise – we discovered an extra $11k added on to the MSRP! Well now we have our true price…or do we? Lifetime of the Vehicle I’m expecting to have this vehicle for 7 – 10 years. While the hard cost of the vehicle is known and dealt with, the costs to run and maintain the vehicle are on top of this. I did some research, and here’s what I’ve found: Fuel and Mileage Gas prices are high as it is for regular fuel, but getting into an MDX will require that I *only* purchase premium fuel, which comes at a premium price. I need to expect my bill at the pump to be higher. Comparing the MDX to my 2007 Rav4 also shows I’ll be gassing up more often. The Rav4 has a city MPG of 21, while the MDX plummets to 16! The MDX does have a bigger fuel tank though, so all in all the number of times I hit the pumps might even out. Still, I estimate I’ll be spending approximately $8000 – $10000 more on gas over a 10 year period than my current Rav4. Service Options Limited Although I have options with my Toyota here in Winnipeg (we have 4 Toyota dealerships), I do go to my original dealer for any service work. Still, I like the fact that I have options. However, there’s only one Acura dealership in all of Winnipeg! So if, for whatever reason, I’m not satisfied with the level of service I’m stuck. Non Warranty Service Work Also let’s not forget that there’s a bulk of work required every year that is *not* covered under warranty – oil changes, tire rotations, brake pads, etc. I expect I’ll need to get new tires at the 5 years mark as well, which can easily be $1200 – $1500 (I just paid $1000 for new tires for the Rav4 and we’re at the 5 year mark). Now these aren’t going to be *new* costs that I’m not used to from our existing vehicles, but they should still be factored in. I’d budget $500/year, or $5000 over the 10 years I’ll own the vehicle. Final Assessment So let’s re-assess the true cost of my dream MDX: MSRP                    $62,890 Taxes                       $7,546 Warranty                 $2,500 Finance Charge         $1094 Gas                        $10,000 Service Work            $5000 Grand Total           $89,030 So now I have a better idea of 10 year cost overall, and I’ve identified some concerns with local service availability. And there’s now much more to consider over the original $62,890 price tag. Tying This Back to Technology Solutions The process that we just went through is no different than what organizations do when considering implementing a new system, technology, or technology based solution, within their environments. It’s easy to tout the short term cost savings of particular product/platform/technology in a vacuum. But its when you consider the wider impact that the true cost comes into play. Let’s create a scenario: A company is not happy with its current data reporting suite. An employee suggests moving to an open source solution. The selling points are: - Because its open source its free - The organization would have access to the source code so they could alter it however they wished - It provided features not available with the current reporting suite At first this sounds great to the management and executive, but then they start asking some questions and uncover more information: - The OSS product is built on a technology not used anywhere within the organization - There are no vendors offering product support for the OSS product - The OSS product requires a specific server platform to operate on, one that’s not standard in the organization All of a sudden, the true cost of implementing this solution is starting to become clearer. The company might save money on licensing costs, but their training costs would increase significantly – developers would need to learn how to develop in the technology the OSS solution was built on, IT staff must learn how to set up and maintain a new server platform within their existing infrastructure, and if a problem was found there was no vendor to contact for support. The true cost of implementing a “free” OSS solution is actually spinning up a project to implement it within the organization – no small cost. And that’s just the short-term cost. Now the organization must ensure they maintain trained staff who can make changes to the OSS reporting solution and IT staff that will stay knowledgeable in the new server platform. If those skills are very niche, then higher labour costs could be incurred if those people are hard to find or if trained employees use that knowledge as leverage for higher pay. Maybe a vendor exists that will contract out support, but then there are those costs to consider as well. And let’s not forget end-user training – in our example, anyone that runs reports will need to be trained on how to use the new system. Here’s the Point We still tend to look at software in an “off the shelf” kind of way. It’s very easy to say “oh, this product is better than vendor x’s product – and its free because its OSS!” but the reality is that implementing any new technology within an organization has a cost regardless of the retail price of the product. Training, integration, support – these are real costs that impact an organization and span multiple departments. Whether you’re pitching an improved business process, a new system, or a new technology, you need to consider the bigger picture costs of implementation. What you define as success (in our example, having better reporting functionality) might not be what others define as success if implementing your solution causes them issues. A true enterprise solution needs to consider the entire enterprise.

  Read the article

• Can't get the L2TP IPSEC up and running

  - by Maciej Swic

  i have an Ubuntu 11.10 (oneiric) server running on a ReadyNAS. Im planning to use this to accept ipsec+l2tp connections through a router. However, the connection is failing somewhere half through. Using Openswan IPsec U2.6.28/K3.0.0-12-generic and trying to connect with an iOS 5 iPhone 4S. This is how far i can get: auth.log: Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "PSK" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-NAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "L2TP-PSK-noNAT" Jan 19 13:54:11 ubuntu pluto[1990]: added connection description "passthrough-for-non-l2tp" Jan 19 13:54:11 ubuntu pluto[1990]: listening for IKE messages Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying new style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: ESPINUDP(1) setup failed for new style NAT-T family IPv4 (errno=19) Jan 19 13:54:11 ubuntu pluto[1990]: NAT-Traversal: Trying old style NAT-T Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 192.168.19.99:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo 127.0.0.1:4500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface lo/lo ::1:500 Jan 19 13:54:11 ubuntu pluto[1990]: adding interface eth0/eth0 2001:470:28:81:a00:27ff:* Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/etc/ipsec.secrets" Jan 19 13:54:11 ubuntu pluto[1990]: loading secrets from "/var/lib/openswan/ipsec.secrets.inc" Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [RFC 3947] method set to=109 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike] method set to=110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [8f8d83826d246b6fc7a8a6a428c11de8] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [439b59f8ba676c4c7737ae22eab8f582] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [4d1e0e136deafa34c4f3ea9f02ec7285] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [80d0bb3def54565ee84645d4c85ce3ee] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: ignoring unknown Vendor ID payload [9909b64eed937c6573de52ace952fa6b] Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-03] meth=108, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02] meth=107, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 110 Jan 19 14:04:31 ubuntu pluto[1990]: packet from 95.*.*.233:500: received Vendor ID payload [Dead Peer Detection] Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: responding to Main Mode from unknown peer 95.*.*.233 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R0 to state STATE_MAIN_R1 Jan 19 14:04:31 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R1: sent MR1, expecting MI2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): both are NATed Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: transition from state STATE_MAIN_R1 to state STATE_MAIN_R2 Jan 19 14:04:33 ubuntu pluto[1990]: "PSK"[1] 95.*.*.233 #1: STATE_MAIN_R2: sent MR2, expecting MI3 Jan 19 14:05:03 ubuntu pluto[1990]: ERROR: asynchronous network error report on eth0 (sport=500) for message to 95.*.*.233 port 500, complainant 95.*.*.233: Connection refused [errno 111, origin ICMP type 3 code 3 (not authenticated)] Router config UDP 500, 1701 and 4500 forwarded to 192.168.19.99 (Ubuntu server for ipsec). Ipsec passthrough enabled. /etc/ipsec.conf # /etc/ipsec.conf - Openswan IPsec configuration file # This file: /usr/share/doc/openswan/ipsec.conf-sample # # Manual: ipsec.conf.5 version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes #charonstart=yes #plutostart=yes protostack=netkey conn PSK authby=secret forceencaps=yes pfs=no auto=add keyingtries=3 dpdtimeout=60 dpdaction=clear rekey=no left=192.168.19.99 leftnexthop=192.168.19.1 leftprotoport=17/1701 right=%any rightprotoport=17/%any rightsubnet=vhost:%priv,%no dpddelay=10 #dpdtimeout=10 #dpdaction=clear include /etc/ipsec.d/l2tp-psk.conf /etc/ipsec.d/l2tp-psk.conf conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT # # PreSharedSecret needs to be specified in /etc/ipsec.secrets as # YourIPAddress %any: "sharedsecret" authby=secret pfs=no auto=add keyingtries=3 # we cannot rekey for %any, let client rekey rekey=no # Set ikelifetime and keylife to same defaults windows has ikelifetime=8h keylife=1h # l2tp-over-ipsec is transport mode type=transport # left=192.168.19.99 # # For updated Windows 2000/XP clients, # to support old clients as well, use leftprotoport=17/%any leftprotoport=17/1701 # # The remote user. # right=%any # Using the magic port of "0" means "any one single port". This is # a work around required for Apple OSX clients that use a randomly # high port, but propose "0" instead of their port. rightprotoport=17/%any dpddelay=10 dpdtimeout=10 dpdaction=clear conn passthrough-for-non-l2tp type=passthrough left=192.168.19.99 leftnexthop=192.168.19.1 right=0.0.0.0 rightsubnet=0.0.0.0/0 auto=route /etc/ipsec.secrets include /var/lib/openswan/ipsec.secrets.inc %any %any: PSK "my-key" 192.168.19.99 %any: PSK "my-key" /etc/xl2tpd/xl2tpd.conf [global] debug network = yes debug tunnel = yes ipsec saref = no listen-addr = 192.168.19.99 [lns default] ip range = 192.168.19.201-192.168.19.220 local ip = 192.168.19.99 require chap = yes refuse chap = no refuse pap = no require authentication = no ppp debug = yes pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd pcp-accept-local ipcp-accept-remote noccp auth crtscts idle 1800 mtu 1410 mru 1410 defaultroute debug lock proxyarp connect-delay 5000 ipcp-accept-local /etc/ppp/chap-secrets # Secrets for authentication using CHAP # client server secret IP addresses maciekish * my-secret * * maciekish my-secret * I can't seem to find the problem. Other ipsec connections to other hosts work from the network im currently at.

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• CodePlex Daily Summary for Monday, June 10, 2013

  CodePlex Daily Summary for Monday, June 10, 2013Popular ReleasesNexusCamera: NexusCamera: Nexus Camera is a control for Windows Phone 7 & 8, which can be used as a menu on the Camera. The idea in making this control when we use a camera nexus. Thanks for Nexus. Need Windows Phone Toolkit https://phone.codeplex.com/ View Sample Camera http://tctechcrunch2011.files.wordpress.com/2012/11/nexus4-camera.jpgVR Player: VR Player 0.3 ALPHA: New plugin system with individual folders TrackIR support Maya and 3ds max formats support Dual screen support Mono layouts (left and right) Cylinder height parameter Barel effect factor parameter Razer hydra filter parameter VRPN bug fixes UI improvements Performances improvements Stabilization and logging with Log4Net New default values base on users feedback CTRL key to open menuZXMAK2: Version 2.7.5.4: - add hayes modem device (thanks to Eltaron) - add host joystick selection - fix joystick bits (swapped in previous version)SimCityPak: SimCityPak 0.1.0.8: SimCityPak 0.1.0.8 New features: Import BMP color palettes for vehicles Import RASTER file (uncompressed 8.8.8.8 DDS files) View different channels of RASTER files or preview of all layers combined Find text in javascripts TGA viewer Ground textures added to lot editor Many additional identified instances and propertiesWsus Package Publisher: Release v1.2.1306.09: Add more verifications on certificate validation. WPP will not let user to try publishing an update until the certificate is valid. Add certificate expiration date on the 'About' form. Filter Approbation to avoid a user to try to approve an update for uninstallation when the update do not support uninstallation. Add the server and console version on the 'About' form. WPP will not let user to publish an update until the server and console are not at the same level. WPP do not let user ...AJAX Control Toolkit: June 2013 Release: AJAX Control Toolkit Release Notes - June 2013 Release Version 7.0607June 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...Rawr: Rawr 5.2.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...VG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesXomega Framework: Xomega.Framework 1.4: Adding support for Visual Studio 2012 and .Net framework 4.5. Minor bug fixes and enhancements.sb0t v.5: sb0t 5.14: Stability fix in script engine. Avatar.exists property fixed in scripting. cb0t custom font protocol re-added and updated to support new Ares.ASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b New ProjectsASP.NET MVC 4 and RequireJS: ASP.NET MVC 4 application with Areas and RequireJSBaseX - Base converter and calculator: Dealing with numbers of any base in .NET.C# Exercises: C# ExercisesClassfinder: ClassfinderCreative OS ALPHA: This is a OS!!!!CSS Exercises: CSS ExercisesCustom Workflow Action: Project showing how to create and use Custom Workflow Action for SharePoint Designer 2013.Devshed Tools: Provides easy to use and compile-time-support solution for various type of projects on the .NET framework. Currently Devshed.Web is in development.Envar Editor: Edit environment variables easily on windowsExcel To Sql: A simplified tool for importing Excel data into SQL.HTML Exercises: HTML ExercisesKnockout.js with ASP.NET MVC: This project implements a system which maps .NET ViewModels to javascript ViewModels for use with knockout.js, using Razor markup syntax.LogoBids: LOGO??????,ORM??OpenAccess ORMManagistics: Management Logistics Application (including: Warehouse, Sale, Purchase, ...)Matrix Switch Preset Utility: A small utility for managing the inputs and outputs from a matrix switch via RS-232. Developed in WPF (VB9) and running on the .Net3.5SP1 framework.MvcSystemsCommander: An ASP.NET C# MVC4 webapp to help systems administrators consolidate common systems administration tasksNewspaperAgent: My small projectOutlook Recovery Software - Efficiently Repair Damaged PST File: This project tells you the easiest way to recover PST file of Outlook. Complete information has been given here to help users.Pattern: Testprocedure: a new procedural programming framework based on .net, by using lambda expression, it can handle async io friendly and provide a full lock-free solutionSharePoint 2013 custom field samples: SharePoint 2013 custom field samples is a research project aims to provide samples for developing custom fields in SharePoint 2013.SharePoint 2013 List Forms: This small framework allows you to manage custom list forms using rendering templates and controls stored in a SharePoint library.The Coconut Cranium Decision Engine: The Coconut Cranium Decision Engine is a boolean decision engine using the most mind-bendingly worse way of working.TxtToSeq: Command line utility to convert Commodore SEQ files to TXT files and vice-versa.ultgw: ult gw

  Read the article

• CodePlex Daily Summary for Saturday, June 08, 2013

  CodePlex Daily Summary for Saturday, June 08, 2013Popular ReleasesXomega Framework: Xomega.Framework 1.4: Adding support for Visual Studio 2012 and .Net framework 4.5. Minor bug fixes and enhancements.sb0t v.5: sb0t 5.14: Stability fix in script engine. Avatar.exists property fixed in scripting. cb0t custom font protocol re-added and updated to support new Ares.ASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...IIS Express GUI: IISExpressGUI Version 1.0 beta: This is a beta version Tested on Windows Xp (IISExpress 7.5) and Windows 8 (IISExpress 8.0) Works with default installation path for IISExpress Manages only web sites configured in IIS Express applicationhost.config Works with default path for applicationhost.config Application expects that applicationhost.config existsDNN Extension Url Providers: Latest Release: Latest Release of all Extension Url ProvidersChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 New ProjectsActiveRoad: IRoad browser settings library Configuration for authentication and data validation iRoad system.AeroHockey: -ASP.NET Web Form Survey: Survey Management, virtual project for ASP.NET Web Form group members.BattleFury: BattleFury is a Game where multiple players can log into a server and fight against each other. The twist is that you can use the given libraries to create codeDomino to Exchange Migration: A Multifunctional server migration tool Mail Migration Wizard is a batch conversion method that flawlessly accomplishes bulk NSF to PST migration or Lotus NotesEAV Manager: Allows users add entities and manager entitiesGet country name from IP: This is an API that outputs two letter country name for a given IP address. This api gives accurate name of the country for a given IPv4 address.Gpx File Cleaner: The GPX file cleaner is a small geocaching tool to remove vendor specific XML elements from a GPX file and reduces the information to the baseline GPX 1.0.HIPC: Party Time!Kunlun: ????????，???? ?? ?????????????，???????C/S????New-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 is a PowerShell script to make creating and publishing NuGet packages quick and easy, whether packing from a .nuspec or project file.ProXR Library: The Pro XR library is a native C# library for communicating to a Pro XR relay controller over TCP/IP or serial port communications. Sarcasm: Fuck yeahSE_Agency_Project: ????? ?? ????? ???? ????? ?????????SharpDevelop Version Selector: This is a replacement for the Visual Studio Version Selector that allows the user to open SLN files based off of user defined rules.SPBusiness: Business Classes to support SharePoint DevelopmentStepsManager: An all in one library to implement a step management in your application in few lines of code.Switchboard: A simple message broker that receives messages from a queue and passes them to plug-in handlers loaded at run time.TasteKidSharp: C# TasteKid API wrapper (www.tastekid.com) ThriveFast SharePoint Utilities: A collection of useful utilities for SharePoint 2010 & 2013 brought to you by ThriveFast. TopBoss: TestingWCSF Contrib Modular Sitemap / Nav Graph (Example): This is NOT an attempt to fork the great WCSF contrib probject. I wrote some stuff to try to extend the idea of using modules to modularizing the sitemap and using it help provide views for the navigation graphs used by the xml pageflow library. I'm posting the code here so I can get some community feedback related to the validity of ideas, the implementation and possible suggestions on improvement with respect to keeping modules at loosely coupled as possible. Cheers PeteWindows 8 Loopback Exemption Manager: GUI to enable Loopback Exemptions for Windows 8 Modern UI Apps Windows Store App Calendar Control: Windows Store App Calendar Control (XAML)

  Read the article

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

• CodePlex Daily Summary for Wednesday, June 05, 2013

  CodePlex Daily Summary for Wednesday, June 05, 2013Popular ReleasesQlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.Web Pages CMS: 0.5: First public releaseHarvester - Debug Viewer for Trace, NLog & Log4Net: v2.0.1 (.NET 4.0): Minor Updates Fixed incorrect process naming being displayed if process ID reassigned before cache invalidated. Fixed incorrect event type/source for TraceListener.TraceData methods. Updated NLog package references. Official Documentation Moved to GitHub http://cbaxter.github.com/Harvester Official Source Moved to GitHub https://github.com/cbaxter/HarvesterSuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...Impulse Media Player: Impulse Media Player 3.3.1.0: EchoNest Analyzer introduced Similar track feature (social tab) Last played tracks can be removed permanently pitch / tempo bar can be hiddenBlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b eReading: eReading: ????，??CPU???????。 ??????????。Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...Umbraco CMS: Umbraco 6.1.1: Source codeLooking for the source code? We're not uploading that as a zip file any more because you can already get it from CodePlex, click this link and hit the "Download" link. BlogRead the release blog post for 6.1.0. Read the release blog post for 6.1.1. Getting Started Read the installation documentation: http://our.umbraco.org/documentation/Installation/ Check the free foundation videos on how to get started building Umbraco sites. They're available from: Introduction for webmasters:...Composite C1 CMS - Open Source on .NET: Composite C1 4.0 (release candidate): Composite C1 4.0 (4.0.4897.31550) (release candidate) Write a review for this release Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.0 The following are highlights of major changes since Composite C1 3.2: General user features: Uploads up to 512MB accepted in the media archive New “Block Selector” in Visual Editor – enable users to create styled div, blockquote etc. elements (not yet availabl...New ProjectsApiDoc: ApiDoc is a library for creating your own API documentation similar to the MSDN directly from your assembly and /// Xml comments without source code.Associativy Internal Link Graph Builder: Orchard module for automatically creating Associativy graphs (http://associativy.com/) from internal links.Azure Business App Scale Proof of Concepts: This is actually a series of proof of concept demo applications built to demonstrate scale of particular architecture or application designs. Badr: .Net Web Framework: Simple, Database-driven, Multiplatform, .Net web frameworkCalcolo di Integrali con approssimazioni: Integrali Metodo dei Trapezi Metodo dei Rettangoli Metodo delle Parabole Metodo di Montecarlo Integralsconfiguration: a full function configuration system based on .netCron Expression Descriptor: "Translate" a Cron Expression in a human readable format. Support databinding, and creation of the expression and Quartz.NET jobs schedulerDaphne Web Edition: The Daphne Web Edition of software for professional checkers players running in a browser.Entity framework T4 NHibernate mapping generator: This project contains T4 templates to create POCOs + NHibernate mappings from an Entity Framework Model (.edmx).EWS Streaming Notification Sample Application: Sample application showing how to handle multiple subscriptions using streaming notifications, specifically for Exchange 2013 (or Wave 15 of Office 365).EXACT_EXTENSION: This is project to support Account System in International SchoolsIPS Training: Playing around with Joe to teach some programming.jean0604wordpressmercurial: dfdafdaLenic.DI: Lenic.DI -- Another IOC Container Library Using DelegateManage Azure Srevice: This project is a windows form application to manage azure service and deployments.Microsoft dot Net Lab: This project concentrates into a Lab a large web project based on Microsoft Best Practices and info on “what works” and more what should be avoided in Prod env.Miris Human Milk Analyser: This is a DEMO project ONLYMultilingual call each other: Multilingual call each othernBlade: A Dependency Injection Container.nChart: A JavaScript Chart Library Base on D3.jsnCMS: A Content Management System.nReport: A JavaScript Report Library.nTemplate: A Template Engine.searchLocal: search localT4 Unit Test Constructor: T4 Unit Test Constructor is a Text Transform file that generates complete Unit Testing project based on siblings projects inside a solution.v3r137: m0l3cUL4r dyN4MiC2 5iMul47i0N u5IN9 V3Rl37 iN739r47I0N. vi5U4li23 p4R7ICL32 8y 0P3n9l P0iN7 5prI73. U23 0P3NMp 4nd 0p3NCl f0r 5p33D.Virtual Sport for Sport Team: This is the website to manage a sports team. Through this website you can manage the members of the team, from players to staff, schedules, and more. and for suWindows Azure MultiSite Role: This web role allows you to host multiple websites on the same VM instances, and synchronising the files automatically.WuvOverlay: An overlay for the game Guild Wars 2 to display useful information obtained from the public API.XYZ: XYZ

  Read the article

• CodePlex Daily Summary for Thursday, June 06, 2013

  CodePlex Daily Summary for Thursday, June 06, 2013Popular ReleasesReliability Modeling and Prediction: Reliability Prediction v2.0.1: Including the reliability modeling schema and the reliability prediction tool. Including case studies (Reporting service and WebScan system). Check Readme.txt for a quick tutorial.Virtual Sport for Sport Team: Virtual Sport Website: This is the website to manage a sports team. Through this website you can manage the members of the team, from players to staff, schedules, and more. and for supporter, be able more easily get to know team through the this websiteChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.Harvester - Debug Viewer for Trace, NLog & Log4Net: v2.0.1 (.NET 4.0): Minor Updates Fixed incorrect process naming being displayed if process ID reassigned before cache invalidated. Fixed incorrect event type/source for TraceListener.TraceData methods. Updated NLog package references. Official Documentation Moved to GitHub http://cbaxter.github.com/Harvester Official Source Moved to GitHub https://github.com/cbaxter/HarvesterSuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .Document.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsPHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...DirectX Tool Kit: May 2013: May 30, 2013 Added more GeometricPrimitives: Cone, Tetrahedron, Octahedron, Dodecahedron, Icosahedron Updated to support loading new metadata from DDS files (if present) Fixed bug with loading of WIC 32bpp RGBE format images Fixed bug when skipping mipmaps in a 1D or 2D array texture DDS fileNew Projectsabang: ????????Alex Develop Kit: ????????C#?????????。AnaLog - Analyse Logique: Software for logical equations analyse. App Excess: App Platform for Windows.Associativy Frontend Engines Administration: Frontend Engines Administration module for the Associativy (http://associativy.com) Orchard graph platform.ATDD Applied (Example): Sample code for Nordic Testing Days 2013 workshop - Acceptance Test Driven Development Applied: An Intro to ATDD using Jasmine and SpecFlowAzCAD: AzCAD is a free CAD program.BVVD Project: SOURCE CODECrzy Engine: C# and XNA ORPG Game Development engine.Custom Pong: Custom PongEDID Puller: Simple C# application showing how to get the EDIDs of the connected monitors to a PC, in particular the manufacturer and model of the display device.GooMUI: A desktop player for the Google Play Music service that runs on Windows.Had: HadIIS Express GUI: The GUI for IISExpress (version 7.5 and 8.0) jean0605jabbrchangbranch: ddjQueryBuddy Port to .Net 4.0+: Upgrading the project to current dot net will make using this app easier for some folks!Kinopoly: Dieses Projekt ist eine Arbeit der Berufschule Bern, GIBB. Das Ziel ist es das berühmte Spiel Monopoly im Film Theme als eine Clientapplikation zu realisieren.Magic Engine - 2D and 3D engine developed by school students: Magic Engine - 2D and 3D engine developed by school studentsMetrics calculation: Calculates metrics with the use of Driven Metrics.Metro WPF: Metro WPF provides a set of controls and styles for you to build your metro style WPF applications.mysitie: this is unknown error site Native API Test Command-Line Utility: A command-line utility that allows the user to call native API function interactively and experiment with how they function.prakark06052013Hg01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.prakark06052013Tfs01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.prakarkGit06052013Git01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [url:http://www.example.com] {"Do QlikView Extension - Animated Scatter Chart: Animated scatter chart for QlikView, inspired by D3js.orgREADPDB(Program Database Reader): This tool uses the Microsoft Debug Interface Access Software Development Kit (DIA SDK) to parser PDB file SelfProject: Just For TestSlWfDesign: 11212SSZZ: SSZZ is a tool for Data Analysistest project codeplex: This is a testtesttom06052013git01: dfdstesttom06052013hg01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.testtom06052013tfs01: gfdgfdthree: It's a personal project.Validation Rules Framework for C++: C++ framework for rule creation, validation and management.

  Read the article

• CodePlex Daily Summary for Friday, June 07, 2013

  CodePlex Daily Summary for Friday, June 07, 2013Popular ReleasesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!ZXMAK2: Version 2.7.5.3: - debugger: add LPC indicator (last executed opcode pc) - add host joystick support (written by Eltaron) - change file extension for CMOS PENTEVO to "cmos" - add hardware value monitor (see Memory Map for PENTEVO/ATM/PROFI)QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 Magick.NET: Magick.NET 6.8.5.402: Magick.NET compiled against ImageMagick 6.8.5.4. These zip files are also available as a NuGet package: https://nuget.org/profiles/dlemstra/patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...New ProjectsAccountingTest: just to learn asp.net mvc 3 Agile Poker Cards for Windows Mobile: During a scrum or other agile processes, you have to estimate the size of a user story during a planning session. With the Agile Poker Cards program there is no need for using real cards anymore!Buildinator: Buildinator generates TFS Build definitions from an XML file, enabling canonical "templates" that make it easy to add or copy build definitions.Clipboard Capture Plugin: Captures an image in the clipboard and gives you more options to insert the image into Live WriterComercial HS: Commercial hsCommonExtranet: CommonExtranet is a basis for an Extranet web site with a user authentication mechanism that incorporates password aging and various features expected on a domain LogOnDataVeryLite: DataVeryLite is a lightweight *Persistence Framework*. DataVeryLite???????*?????*. ??????Nhibernate?????,??Linq to sql???????,?????DataVeryLite.daydayup: snd\realdamon_cpDNN Extension Url Providers: The DNN Extension Url Providers project contains installable extensions for extending DNN URL functionality.DotNetNuke Kitchen Sink: A sample module project for DotNetNuke with a variety of different scenarios covered.Football Team Management: Manage team, player, match and staffFreePiano: Play piano using your computer keyboard.GIF animator: Dev in progessI'm Feeling Lucky Plugin: Lets you put a link in that acts as though doing an I'm Feeling Lucky search.Insert Video Jnr: This is a baby version of my Video plugin, it is intended for Hosted Wordpress blogs only and shouldn't be used with other blog providers.jabbrmercurial: 22Kax.WebControls.RadioButtonList: Web Custom Control that extend RadioButtonList to allow uncheckable state.Kinect Screen Aware: Kinect Screen Aware uses a Kinect to detect touch, hover, gestures, and voice on a standard television display. It's designed to be low cost and easy to setuplppbop: Aplikasi Laporan Bantuan Operasional PendidikanmobiSms: mobismsnga: National Geography of AzerothRadminPassword: ????????? ??? ??????????????? ????? ??????? ? ????????? ????????? ?????????? ?????????? ?? Radmin. A program to automatically enter the passwords in the famous PC remote control software Radmin.Rx Heat: Rx Heat is a library of helper classes that complements the Reactive Extensions Library with additional features. Schema Generator: The basic idea behind this utility is to emit the database schema from an existing SQL Server database. From a developer perspective, it is sometimes very much handy to quickly take a printout of the database structure for creating the UI layout.SharePoint Packager: Perform the instalation, upgrade and retraction of Ms Sharepoint Applications fast, easy and efficientsmartTouch: :-)SpotifyLync: A small tray application that reports your Spotify status to your Microsoft Lync client. Alos contains additional Spotify / Lync features.Syngine: A simple to use game framework using MonoGame and Farseer Physicstest060601CM: testtestMC053003: testToSic.Eav: A powerfull EAV (Entity-Attribute-Value) system created by 2sic Internet Solutions in Switzerland. It's currently mainly used inside 2SexyContent for DotNetNukeTraceLight: <project name> TraceLight ray tracer </project name> <programming language> C# </programming language>trakr: minimalist webtracking software written in python and twistedTwitterXML: A .NET wrapper library for the Twitter REST API. Currently, all of the methods return an XMLDocument. Also included are classes for Users, Statuses, and Direct Messages that use XML serialization for converting the XML responses to objects with a Deserialize() call.Universal Parking Centre: Universal Parking Centre is a website-based software developed by Center Code to help you in organizing your parking business.Velocity OS: Be fast, Be strong. It's Velocity.WinKeGen Code Samples: This project will allow beginning developers a close look at some code samples and variations of how to use those samples in their own code.WinRT Synth lib: Project Description this project aims to provide an easy-to-use API, for sound synthesis under winrt, in c#. It use the XAudio2 api for the playback of the sounWpfCollaborative3D: WpfCollaborative3DX-Parking: Our online parking sites , try at : x-parking.pemrogramaninternet.infoYnote Plugins: Ynote Classic Plugins which help in transforming Ynote Classic into a powerful HTML / XML Editor or an IDE.

  Read the article

• CodePlex Daily Summary for Sunday, June 09, 2013

  CodePlex Daily Summary for Sunday, June 09, 2013Popular ReleasesZXMAK2: Version 2.7.5.5: - several fixes for joystick scanVG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesCKEditor™ Provider for DotNetNuke®: CKEditor Provider 2.00.05: Whats New Updated to CKEditor 4.1.1 Added Auto Save Function (autosave plugin) {Delay can be defined in the Config - Default is 25} New Setting to set the Default Link Type (Editor Config Tab) Added CodeMirror Plugin Settings to the Editor Config Tab Added WordCount Plugin Settings to the Editor Config Tab Added Maximum Upload File Size Info to the Upload Dialog Added Check for Maximum Upload Size on Quick Upload and File Browser Upload changes File-Browser: Fixed an Issue with S...Property Framework: Property Framework (binaries) Latest: Latest stable 6/8/2013xFunc: xFunc (2.2.0.0): Added: user functions;PHP Vulnerability Hunter: PHP Vulnerability Hunter 1.4.0.20 Alpha: PHP Vulnerability Hunter 1.4.0.20 AlphaXomega Framework: Xomega.Framework 1.4: Adding support for Visual Studio 2012 and .Net framework 4.5. Minor bug fixes and enhancements.sb0t v.5: sb0t 5.14: Stability fix in script engine. Avatar.exists property fixed in scripting. cb0t custom font protocol re-added and updated to support new Ares.ASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .Document.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsNew ProjectsAcer 1420p Leaky Handle Fix: Fixes leaking handles on the Acer 1420p laptop given out at PDC09.Akismet Spam Filter for Community Server 2008.5: Akismet Spam Filter for Community Server 2008.5 Atom Timer: Atom Timer is a thread based time that allows schedules to be created using events.BRICK CMS: These Days,I am tired to listen that: .NET is going down and JAVA/Ruby/Python will replace it. yes,they have been growing up while .NET's going down. do or die?DataTestFramework: ???????&ORM??????Date/Time Interval: The Date Time Interval allows for different types of interval to be created. The class will enumerate the defined interval support LINQ statements. More informaDimas.Net: .net infrastructure to create a web/service server from scratch. it includes n-tier , log , policy injection , mapper , MVC best prictice and etc.Gannet: Gannet is an operating system for us (the target developers) to learn about how an Operating System is put together and what components are needed.Image Resize For Android: Android????????????LightBlog: LightBlog?????Node.js，Express??，Mongodb???markdown??????????Memory: Live artistic interaction using KinectNestedHtmlWriter: This is a helper class library for writing simple HTML document, by using statement in C#.Operation Sneak Peek: Windows Phone game that includes stealth+logic gameplay. Player has to look for hidden letters to discover a secret word and use it to defuse a bomb.Orchard DarkStripes Theme: Orchard theme based on Octopress DarkStripesPath copy from context menu: ????????????????????????????Phantomas: mouhouhahahahaSE1: NO SUMMARY ! SiteLinks DNN Module: The SiteLinks DNN module is a module for displaying a list of existing links on your DNN website. This module works in similarly to the DNN "Links" skin object.sql to object maping: SqlString CodeMapTCP/IP Communication Framework: TCP/IP Communication Framework (TCP/IP CF) is a library that wraps the .NET Socket class and defines several classes for developing communication applications..UTorrentClient Api: UTorrentClient Api is an extensible set of classes that use WebUI to manipulate µTorrent remotely.Visual Studio Spell Checker: A Visual Studio editor extension that checks the spelling of comments, strings, and plain text as you type. Supports configuration and various languages.zjsru_xyw: this is a test projectZTrans: ztrans is language for embedded software development???: test?????????: ??????????? ????：VS2012+SQL2012 ????：ASP.NET(.NET 4.0) ????：MVC3+EF5 ????： ?????，??，?? ???????，??，?? ????????，??，?? ????DIV+CSS?? Jquery??1.6.4 ??Ajax??????

  Read the article

• The Incremental Architect&acute;s Napkin - #2 - Balancing the forces

  - by Ralf Westphal

  Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/06/02/the-incremental-architectacutes-napkin---2---balancing-the-forces.aspxCategorizing requirements is the prerequisite for ecconomic architectural decisions. Not all requirements are created equal. However, to truely understand and describe the requirement forces pulling on software development, I think further examination of the requirements aspects is varranted. Aspects of Functionality There are two sides to Functionality requirements. It´s about what a software should do. I call that the Operations it implements. Operations are defined by expressions and control structures or calls to frameworks of some sort, i.e. (business) logic statements. Operations calculate, transform, aggregate, validate, send, receive, load, store etc. Operations are about behavior; they take input and produce output by considering state. I´m not using the term “function” here, because functions - or methods or sub-programs - are not necessary to implement Operations. Functions belong to a different sub-aspect of requirements (see below). Operations alone are not enough, though, to make a customer happy with regard to his/her Functionality requirements. Only correctly implemented Operations provide full value. This should make clear, why testing is so important. And not just manual tests during development of some operational feature, but automated tests. Because only automated tests scale when over time the number of operations increases. Without automated tests there is no guarantee formerly correct operations are still correct after more got added. To retest all previous operations manually is infeasible. So whoever relies just on manual tests is not really balancing the two forces Operations and Correctness. With manual tests more weight is put on the side of the scale of Operations. That might be ok for a short period of time - but in the long run it will bite you. You need to plan for Correctness in the long run from the first day of your project on. Aspects of Quality As important as Functionality is, it´s not the driver for software development. No software has ever been written to just implement some operation in code. We don´t need computers just to do something. All computers can do with software we can do without them. Well, at least given enough time and resources. We could calculate the most complex formulas without computers. We could do auctions with millions of people without computers. The only reason we want computers to help us with this and a million other Operations is… We don´t want to wait for the results very long. Or we want less errors. Or we want easier accessability to complicated solutions. So the main reason for customers to buy/order software is some Quality. They want some Functionality with a higher Quality (e.g. performance, scalability, usability, security…) than without the software. But Qualities come in at least two flavors: Most important are Primary Qualities. That´s the Qualities software truely is written for. Take an online auction website for example. Its Primary Qualities are performance, scalability, and usability, I´d say. Auctions should come within reach of millions of people; setting up an auction should be very easy; finding a suitable auction and bidding on it should be as fast as possible. Only if those Qualities have been implemented does security become relevant. A secure auction website is important - but not as important as a fast auction website. Nobody would want to use the most secure auction website if it was unbearably slow. But there would be people willing to use the fastest auction website even it was lacking security. That´s why security - with regard to online auction software - is not a Primary Quality, but just a Secondary Quality. It´s a supporting quality, so to speak. It does not deliver value by itself. With a password manager software this might be different. There security might be a Primary Quality. Please get me right: I don´t want to denigrate any Quality. There´s a long list of non-functional requirements at Wikipedia. They are all created equal - but that does not mean they are equally important for all software projects. When confronted with Quality requirements check with the customer which are primary and which are secondary. That will help to make good economical decisions when in a crunch. Resources are always limited - but requirements are a bottomless ocean. Aspects of Security of Investment Functionality and Quality are traditionally the requirement aspects cared for most - by customers and developers alike. Even today, when pressure rises in a project, tunnel vision will focus on them. Any measures to create and hold up Security of Investment (SoI) will be out of the window pretty quickly. Resistance to customers and/or management is futile. As long as SoI is not placed on equal footing with Functionality and Quality it´s bound to suffer under pressure. To look closer at what SoI means will help to become more conscious about it and make customers and management aware of the risks of neglecting it. SoI to me has two facets: Production Efficiency (PE) is about speed of delivering value. Customers like short response times. Short response times mean less money spent. So whatever makes software development faster supports this requirement. This must not lead to duct tape programming and banging out features by the dozen, though. Because customers don´t just want Operations and Quality, but also Correctness. So if Correctness gets compromised by focussing too much on Production Efficiency it will fire back. Customers want PE not just today, but over the whole course of a software´s lifecycle. That means, it´s not just about coding speed, but equally about code quality. If code quality leads to rework the PE is on an unsatisfactory level. Also if code production leads to waste it´s unsatisfactory. Because the effort which went into waste could have been used to produce value. Rework and waste cost money. Rework and waste abound, however, as long as PE is not addressed explicitly with management and customers. Thanks to the Agile and Lean movements that´s increasingly the case. Nevertheless more could and should be done in many teams. Each and every developer should keep in mind that Production Efficiency is as important to the customer as Functionality and Quality - whether he/she states it or not. Making software development more efficient is important - but still sooner or later even agile projects are going to hit a glas ceiling. At least as long as they neglect the second SoI facet: Evolvability. Delivering correct high quality functionality in short cycles today is good. But not just any software structure will allow this to happen for an indefinite amount of time.[1] The less explicitly software was designed the sooner it´s going to get stuck. Big ball of mud, monolith, brownfield, legacy code, technical debt… there are many names for software structures that have lost the ability to evolve, to be easily changed to accomodate new requirements. An evolvable code base is the opposite of a brownfield. It´s code which can be easily understood (by developers with sufficient domain expertise) and then easily changed to accomodate new requirements. Ideally the costs of adding feature X to an evolvable code base is independent of when it is requested - or at least the costs should only increase linearly, not exponentially.[2] Clean Code, Agile Architecture, and even traditional Software Engineering are concerned with Evolvability. However, it seems no systematic way of achieving it has been layed out yet. TDD + SOLID help - but still… When I look at the design ability reality in teams I see much room for improvement. As stated previously, SoI - or to be more precise: Evolvability - can hardly be measured. Plus the customer rarely states an explicit expectation with regard to it. That´s why I think, special care must be taken to not neglect it. Postponing it to some large refactorings should not be an option. Rather Evolvability needs to be a core concern for every single developer day. This should not mean Evolvability is more important than any of the other requirement aspects. But neither is it less important. That´s why more effort needs to be invested into it, to bring it on par with the other aspects, which usually are much more in focus. In closing As you see, requirements are of quite different kinds. To not take that into account will make it harder to understand the customer, and to make economic decisions. Those sub-aspects of requirements are forces pulling in different directions. To improve performance might have an impact on Evolvability. To increase Production Efficiency might have an impact on security etc. No requirement aspect should go unchecked when deciding how to allocate resources. Balancing should be explicit. And it should be possible to trace back each decision to a requirement. Why is there a null-check on parameters at the start of the method? Why are there 5000 LOC in this method? Why are there interfaces on those classes? Why is this functionality running on the threadpool? Why is this function defined on that class? Why is this class depending on three other classes? These and a thousand more questions are not to mean anything should be different in a code base. But it´s important to know the reason behind all of these decisions. Because not knowing the reason possibly means waste and having decided suboptimally. And how do we ensure to balance all requirement aspects? That needs practices and transparency. Practices means doing things a certain way and not another, even though that might be possible. We´re dealing with dangerous tools here. Like a knife is a dangerous tool. Harm can be done if we use our tools in just any way at the whim of the moment. Over the centuries rules and practices have been established how to use knifes. You don´t put them in peoples´ legs just because you´re feeling like it. You hand over a knife with the handle towards the receiver. You might not even be allowed to cut round food like potatos or eggs with it. The same should be the case for dangerous tools like object-orientation, remote communication, threads etc. We need practices to use them in a way so requirements are balanced almost automatically. In addition, to be able to work on software as a team we need transparency. We need means to share our thoughts, to work jointly on mental models. So far our tools are focused on working with code. Testing frameworks, build servers, DI containers, intellisense, refactoring support… That´s all nice and well. I don´t want to miss any of that. But I think it´s not enough. We´re missing mental tools, tools for making thinking and talking about software (independently of code) easier. You might think, enough of such tools already exist like all those UML diagram types or Flow Charts. But then, isn´t it strange, hardly any team is using them to design software? Or is that just due to a lack of education? I don´t think so. It´s a matter value/weight ratio: the current mental tools are too heavy weight compared to the value they deliver. So my conclusion is, we need lightweight tools to really be able to balance requirements. Software development is complex. We need guidance not to forget important aspects. That´s like with flying an airplane. Pilots don´t just jump in and take off for their destination. Yes, there are times when they are “flying by the seats of their pants”, when they are just experts doing thing intuitively. But most of the time they are going through honed practices called checklist. See “The Checklist Manifesto” for very enlightening details on this. Maybe then I should say it like this: We need more checklists for the complex businss of software development.[3] But that´s what software development mostly is about: changing software over an unknown period of time. It needs to be corrected in order to finally provide promised operations. It needs to be enhanced to provide ever more operations and qualities. All this without knowing when it´s going to stop. Probably never - until “maintainability” hits a wall when the technical debt is too large, the brownfield too deep. Software development is not a sprint, is not a marathon, not even an ultra marathon. Because to all this there is a foreseeable end. Software development is like continuously and foreever running… ? And sometimes I dare to think that costs could even decrease over time. Think of it: With each feature a software becomes richer in functionality. So with each additional feature the chance of there being already functionality helping its implementation increases. That should lead to less costs of feature X if it´s requested later than sooner. X requested later could stand on the shoulders of previous features. Alas, reality seems to be far from this despite 20+ years of admonishing developers to think in terms of reusability.[1] ? Please don´t get me wrong: I don´t want to bog down the “art” of software development with heavyweight practices and heaps of rules to follow. The framework we need should be lightweight. It should not stand in the way of delivering value to the customer. It´s purpose is even to make that easier by helping us to focus and decreasing waste and rework. ?

  Read the article

• java runtime 6 with socks v5 proxy - Possible?

  - by rwired

  I have written an application that (amongst other things) runs a local service in windows that acts as a SOCKS v5 proxy for Firefox. I'm in the debugging phase right now and have found certain websites that don't work correctly. For example the Java Applet for Picture Uploading on Facebook.com fails because is is unable to lookup domains. My app overrides a hidden FF config setting network.proxy.socks__remote__dns setting it to true. The whole purpose of the app is to allow access to websites when behind a firewall (e.g. if the user is in China), so this setting is essential to ensure domains are resolved remotely also (and not just HTTP requests). In the JRE6 settings (documented here) there isn't an equivalent setting, and since remote DNS resolution is a feature of SOCKS v5 and not v4 as the documentation seems to imply I'm worried that it's just not possible. How can I programmatically make sure the JRE uses a SOCKS v5 proxy for all requests (including DNS)? UPDATE: Steps to reproduce this problem: Make sure you are behind a firewall that blocks (or redirects) internet access including DNS Install PuTTY and add a dynamic SSH tunnel on some port number of your choice (e.g. 9870). Then login to a remote server that has full access to the internet Launch Firefox and you will not be able to browse the web In FF network settings set the SOCKS v5 proxy to localhost:9870 In FF go to about:config, change network.proxy.socks__remote__dns to true You will now be able to browse the web. Go to facebook.com, login, go to your profile and attempt to use the picture uploader java applet to add some pictures It will fail with a series of class not found errors looking similar to: load: class com.facebook.facebookphotouploader5.FacebookPhotoUploader5.class not found. I believe this is failing because the JRE is unable to resolve the domain that the class resides on. I'm basing this belief on the fact that the documentation (http://java.sun.com/javase/6/docs/technotes/guides/deployment/deployment-guide/properties.html) talks only about SOCKS v4 (which as far as I know does not support remote DNS). My deployment.properties file is located in %APPDATA%\Sun\Java\Deployment. I can confirm that modifications I make in the Java Control Panel get written into that file. If instead of "Use browser setting" the network settings for Java I override and attempt to use the SOCKS proxy settings manually, I still have the issue. There does not seem to be an easy way to force the JRE to do DNS remotely through the Proxy. UPDATE 2: Without the SOCKS proxy, from my local client www.facebook.com resolves to 203.161.230.171 upload.facebook.com resolves to 64.33.88.161 Neither host is reachable (because of the firewall) If I login to the remote server, I get: www.facebook.com 69.63.187.17 upload.facebook.com 69.63.178.32 Both these IPs change after a few minutes, as it seems Facebook uses round-robin DNS and other load-balancing. With the Proxy settings set in Firefox, I can navigate to www.facebook.com without any difficulty (since DNS is being resolved remotely on the Proxy). Whey I go to the page with the Java applet it fails with the stacktrace messages I've already reported. However if I edit Windows\System32\drivers\etc\hosts, adding the correct IP for upload.facebook.com I can get the applet to load and work correctly (restart of FF is sometimes necessary). This evidence seems to support my theory that the Java Runtime is not resolving DNS on the Proxy, but instead just routing traffic though it. My application is for mass-deployment, and needs to work with java applets on other sites (not just facebook). I really need a work-around for this problem. UPDATE 3 Stacktrace dump a requested by ZZ Coder: load: class com.facebook.facebookphotouploader5.FacebookPhotoUploader5.class not found. java.lang.ClassNotFoundException: com.facebook.facebookphotouploader5.FacebookPhotoUploader5.class at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at java.lang.ClassLoader.loadClass(Unknown Source) at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source) at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source) at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: java.net.SocketException: Connection reset at java.net.SocketInputStream.read(Unknown Source) at java.io.BufferedInputStream.fill(Unknown Source) at java.io.BufferedInputStream.read1(Unknown Source) at java.io.BufferedInputStream.read(Unknown Source) at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.http.HttpClient.parseHTTP(Unknown Source) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source) at java.net.HttpURLConnection.getResponseCode(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) ... 7 more Exception: java.lang.ClassNotFoundException: com.facebook.facebookphotouploader5.FacebookPhotoUploader5.class Dumping class loader cache... Live entry: key=http://upload.facebook.com/controls/2008.10.10_v5.5.8/,FacebookPhotoUploader5.jar,FacebookPhotoUploader5.jar, refCount=1, threadGroup=sun.plugin2.applet.Applet2ThreadGroup[name=http://upload.facebook.com/controls/2008.10.10_v5.5.8/-threadGroup,maxpri=4] Done.

  Read the article

• CodePlex Daily Summary for Tuesday, June 11, 2013

  CodePlex Daily Summary for Tuesday, June 11, 2013Popular ReleasesToolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.11): XrmToolbox improvement Add exception handling when loading plugins Updated information panel for displaying two lines of text Tools improvementMetadata Document Generator (v1.2013.6.10)New tool Web Resources Manager (v1.2013.6.11)Retrieve list of unused web resources Retrieve web resources from a solution All tools listAccess Checker (v1.2013.2.5) Attribute Bulk Updater (v1.2013.1.17) FetchXml Tester (v1.2013.3.4) Iconator (v1.2013.1.17) Metadata Document Generator (v1.2013.6.10) Privilege...Document.Editor: 2013.23: What's new for Document.Editor 2013.23: New Insert Emoticon support Improved Format support Minor Bug Fix's, improvements and speed upsChristoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.4 for VS2012: V2.4 - Release Date 6/10/2013 Items addressed in this 2.4 release Updated MSBuild Community Tasks reference to 1.4.0.61 Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesLayered Architecture Sample for .NET: Leave Sample - June 2013 (for .NET 4.5): Thank You for downloading Layered Architecture Sample. Please read the accompanying README.txt file for setup and installation instructions. This is the first set of a series of revised samples that will be released to illustrate the layered architecture design pattern. This version is only supported on Visual Studio 2012. This samples illustrates the use of ASP.NET Web Forms, ASP.NET Model Binding, Windows Communications Foundation (WCF), Windows Workflow Foundation (WF) and Microsoft Ente...Papercut: Papercut 2013-6-10: Feature: Shows From, To, Date and Subject of Email. Feature: Async UI and loading spinner. Enhancement: Improved speed when loading large attachments. Enhancement: Decoupled SMTP server into secondary assembly. Enhancement: Upgraded to .NET v4. Fix: Messages lost when received very fast. Fix: Email encoding issues on display/Automatically detect message EncodingMapWinGIS ActiveX Map and GIS Component: MapWinGIS v4.8.8 Release Candidate - 32 Bit: This is the first release candidate of MapWinGIS. Please test it thoroughly.MapWindow 4: MapWindow GIS v4.8.8 - Release Candidate - 32Bit: Download the release notes here: http://svn.mapwindow.org/svnroot/MapWindow4Dev/Bin/MapWindowNotes.rtfVR Player: VR Player 0.3 ALPHA: New plugin system with individual folders TrackIR support Maya and 3ds max formats support Dual screen support Mono layouts (left and right) Cylinder height parameter Barel effect factor parameter Razer hydra filter parameter VRPN bug fixes UI improvements Performances improvements Stabilization and logging with Log4Net New default values base on users feedback CTRL key to open menuSimCityPak: SimCityPak 0.1.0.8: SimCityPak 0.1.0.8 New features: Import BMP color palettes for vehicles Import RASTER file (uncompressed 8.8.8.8 DDS files) View different channels of RASTER files or preview of all layers combined Find text in javascripts TGA viewer Ground textures added to lot editor Many additional identified instances and propertiesWsus Package Publisher: Release v1.2.1306.09: Add more verifications on certificate validation. WPP will not let user to try publishing an update until the certificate is valid. Add certificate expiration date on the 'About' form. Filter Approbation to avoid a user to try to approve an update for uninstallation when the update do not support uninstallation. Add the server and console version on the 'About' form. WPP will not let user to publish an update until the server and console are not at the same level. WPP do not let user ...AJAX Control Toolkit: June 2013 Release: AJAX Control Toolkit Release Notes - June 2013 Release Version 7.0607June 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can be found at...Rawr: Rawr 5.2.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...VG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...New Projects.Net Framework Detector: This application displays all the .Net framework installed on a PC.Adhayayan: Online learning management system designed for small as having 50 students and large as 1000+ students. This is community version having most needed features.Akad SPPortal: Project portal Reserved for unit with features the basic. Been Development in the Background platform SharePoint foundation 2010. Combined EXT.net FrameworkANGF Autumn's Novel Game Framework: This is a novel game framework project. ANGF was use by a game of "1980 Otaku no Hideo", before Codeplex project started. auto check in: help users to login and check in for certain websites automatically,such as xiami and taobaoBasic Expression Evaluator C#: Mathematical Expression Evaluation with symbols and normal bodmas order of precedence. Supports basic arithmetic operations and access to a symbol dictionaryCaloriesCalculator: CaloriesCalculator, the code refactor exampleCamadanPortal: Just a simple company website...charity organization1: charity organizationControl de Asistencia - Grupo Azar2: Control de asistenciaExpenses Manager: Expenses Manager for Windows Phone 8File Sync (Desktop Application): This is a simple "File Synchronizing" / "File Back Up" software, uses Microsift Sync 2.0Furcadia Heimdall Tester: An application that helps Furcadia technicians test the integrity of the game server. It checks for availability of each heimdall, its connectivity to the rest of the system (horton/tribble) and how often it receives a user compared to the rest of them.Furcadia Installer Browser: A program that can access files within a Furcadia installer and allow the user to open them from within the install package, extract some or all the files inside the package, check data integrity of each file and compare the content of two installers.Furcadia Map Normalizer: Furcadia Map Normalizer is a small tool that helps recover a damaged Furcadia map after a live-edit bug. It restores out-of-range elements within back to zero.MyHistory: .NexusCamera: Nexus Camera is a control for Windows Phone 7 & 8, which can be used as a menu on the Camera. The idea in making this control when we use a camera nexus. ThanksNUnit Test Runner: Allows you to run NUnit tests in a more flexible way.Photo Printer Load Balancing: This was developed as a small utility allowing for multiple printers to be used in a DIY photobooth. It monitors a folder for images and load balances a printerResource Translator: A utility that allows you to quickly translate .NET resource files.SCCM Powershell Module: A powershell module to simplify the administration of a System Center Configuration Manager (SCCM) environment.ShardMath: A simple cross platform maths library with expression parsing written without any dependencies on existing pre installed .NET libraries.SoftwareEngineering: Software Engineering Project that named SakhtemanPezeshkan Sprint TinCan LRS: Using the TinCan specifications, this C# MVC project attempts to provide endpoints for TinCan compliant clients.threadpool: a high performance threadpool good for tiny / small / medium processor work, which is the base of event_comb procedural programming framework.TouchProxy (for Windows 8): A remote touch injection client for Windows 8 using standard TUIO+OSC protocols, variable input calibration, and integrated hosted Wi-Fi networking for devices.UGSF Design StarterKit: Information for helping users to create SharePoint Design.UNREAL GAME BY FREITAG: Unreal action game!Win8DemoAcceleratore: This project is a demo project for a lab on Windows 8 Store App development Windows 8 App Design Reference Template: Education Dark Banner: Education Dark Banner Template help if you want to build an app which has an option for group category display and education detailsWindows 8 App Design Reference Template: Photo Viewer: Photo Viewer template will help if you want a photo gallery app to showcase images from various folders. ????: ????WP7??????

  Read the article

• CodePlex Daily Summary for Thursday, October 18, 2012

  CodePlex Daily Summary for Thursday, October 18, 2012Popular ReleasesGac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.4.0.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Added Windows 8 theme (except tab control, will be provided for the next release) GacUI will choose to use Windows 7 theme or Windows 8 theme as default theme according to OS version Added 1 new demos Template.Window.CustomizedBorder ...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...JaySvcUtil - generate JavaScript context from OData metadata: JaySvcUtil 1.2.2: You will need the JayData library to use contexts generated with JaySvcUtil! Get it from here: http://jaydata.codeplex.comVFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...New ProjectsAnonymous InfoPath Browser Forms Web Part: Web part for SharePoint 2007 and 2010 that enables the anonymous submission of InfoPath forms.ath sem5 gr3 proj1: just a simple app to learn how to work in groups, just a start in our programming careerAtif M DNNTaskManager: This is a simple task manager AWS for .NET Sample (Amazon EC2, S3, SQS, DynamoDB): Amazon Web Services (AWS) Sample for .NET (C#) with Asp.NET MVC and Web API. Including S3, DynamoDB, Elastic Beanstalk and SQSCodingWheels.DataTypes: DataTypes tries to make it easier for developers to have concrete typesafe objects for working with many common forms of data. Many times these data objects are just doubles or ints floating through your code with abbreviations on them describing what they represent.Display attachments (list view) SP 2010: Display attachments (SP 2010) is a field for all type lists without types: Document library, Image library, Links, Surveys.Donation Tracker: This is a school projectEveHQ : The Internet Spaceship Toolkit: Multi-faceted character application for Eve-Online. Includes pilot monitoring, skill queue planning, ship fitting, industry and more.EventConni: EventConniFileCloud.Net: FileCloud.NET is a .Net wrapper for http://filecloud.io/ service API.Foodies: FoodiesForce PowerPivot Refresh: This project contains an c# utility class (CustomDataRefreshUtils) to refresh a PowerPivot file in SharePoint 2010. Geometric Modeling: REnder a mesh with Visual Studio - C#Heavysoft Mince: Heavysoft Mince is an opportunity to enhance my skills and to show how free software can be used in enterprise-level systems.HP iLO Management Utility: A small utility to provide a nice interface for managing multiple servers over the iLO interface.iMeeting: iMeeting is a simple application built in Java. iTask: iTask for Windows 8 LamWebOS: this is test project.MackProjects_Musicallis: Projeto da disciplina de Técnicas de Programação Aplicada II da Universidade Presbiteriana Mackenzie - SP.Merge PDF: MergePDF is an easy and simple tool which could help you batch merge PDF files (any number you want) into one PDF file quickly. It is completely free. With MerNetGen: O NetGen é um projeto de geração automatizada de interface Web em ASP.NET a partir de modelo de classes do LINQ-TO-SQL, estando disponível como um Addin para o Visual Studio 2008.Other Ways: ?? ! ????!!!!!Physical Therapy Timer: A simple Windows application that makes it easy to set a countdown timer for a required time period, and keep track of how many times the timer has be run.PicoMax: This version of PicoMax has everything you need to use the Seeed OLED without the MS Graphics class. It can be used in Gadgeteer or a regular NETMF project.post tracker: ASP, WEB API, WINDOWS PhoneRandomEngine: Open Source Game Engine.Resident Raver: This is Windows 8 version of Resident Raver which I wrote for my Intro To HTML5 Game Dev book. It requires the Impact JavaScript game framework.RogueTS: RogueTS is a Roguelike engine written in TypeScript. It features randomly generated maps, basic lighting effects, collision detection and additional stub code.RonYeeStores: ????????????，??C2C?B2C???????????。ShangHaiTunnel monitor: shang hai tunnel projectSharePoint List Security: Free, open source set of features for SharePoint 2010 to enhance the OOTB list permissions by adding column level permissions for users and groups.Skywave Code Lines Counter: It is a tiny program which will count real written lines of code. Real lines means that we removed autogenerated lines, empty lines and single '{' or '}' lines (in C#) and ... Currently supports .cs and .vb files (for C# and VB) It will say how much you worked ;-)switchcontroles: HAT Switch controle sy seguimientoSyscore: Steps : 1 - Definitions 2 - Requirements 3 - Projecting 4 - Delegation 5 - Prototyping 6 - Testing/Analizing 7 - Finalizing 8 - Distribution 9 - Congratulationstarikscodeplexproject: tarikscodeplexprojectTaskManager04: This project is an effort to implement the coding examples given in the TASK MANAGER video series into a working DotNetNuke program.testc: this is a test ,heihei,yongshengtesttom10172012git01: fds fs fs fs tsUnit - TypeScript Unit Testing Framework: tsUnit is a unit testing framework for TypeScript, written in TypeScript. It allows you to encapsulate your test functions in classes and modules.WebGrease: WebGrease is a suite of tools for optimizing javascript, css files and images.????: ??《?????》、《??》、《???》、《??》???。。。

  Read the article

• Feedback + Bad output

  - by user1770094

  So I've got an assignment I think I'm more or less done with, but there is something which is messing up the output badly somewhere down the line, or even the calculation, and I don't see where the problem is. The assignment is to make a game in which a certain ammount of players run up through a tunnel towards a spot,where they will stop and spin around it,and then their dizziness is supposed to make them randomly either progress towards goal or regress back towards start.And each time they get another spot closer to goal,they get another "marking",and it goes on like this until one of them reaches goal. The program includes three files: one main.cpp,one header file and another cpp file. The header file: #ifndef COMPETITOR_H #define COMPETITOR_H #include <string> using namespace std; class Competitor { public: void setName(); string getName(); void spin(); void move(); int checkScore(); void printResult(); private: string name; int direction; int markedSpots; }; #endif // COMPETITOR_H The second cpp file: #include <iostream> #include <string> #include <cstdlib> #include <ctime> #include "Competitor.h" using namespace std; void Competitor::setName() { cin>>name; } string Competitor::getName() { return name; } void Competitor::spin() { srand(time(NULL)); direction = rand()%1+0; } void Competitor::move() { if(direction == 1) { markedSpots++; } else if(direction == 0 && markedSpots != 0) { markedSpots--; } } int Competitor::checkScore() { return markedSpots; } void Competitor::printResult() { if(direction == 1) { cout<<" is heading towards goal and has currently "<<markedSpots<<" markings."; } else if(direction == 0) { cout<<"\n"<<getName()<<" is heading towards start and has currently "<<markedSpots<<" markings."; } } The main cpp file: #include <iostream> #include <string> #include <cstdlib> #include <ctime> #include "Competitor.h" using namespace std; void inputAndSetNames(Competitor comps[],int nrOfComps); void makeTwist(Competitor comps[],int nrOfComps); void makeMove(Competitor comps[],int nrOfComps); void showAll(Competitor comps[],int nrOfComps); int winner(Competitor comps[],int nrOfComps, int nrOfTwistPlaces); int main() { int nrOfTwistPlaces; int nrOfComps; int noWinner = -1; int laps = 0; cout<<"How many spinning places should there be? "; cin>>nrOfTwistPlaces; cout<<"How many competitors should there be? "; cin>>nrOfComps; Competitor * comps = new Competitor[nrOfComps]; inputAndSetNames(comps, nrOfComps); do { laps++; cout<<"\nSpin "<<laps<<":"; makeTwist(comps, nrOfComps); makeMove(comps, nrOfComps); showAll(comps, nrOfComps); }while(noWinner == -1); delete [] comps; return 0; } void inputAndSetNames(Competitor comps[],int nrOfComps) { cout<<"Type in the names of the "<<nrOfComps<<" competitors:\n"; for(int i=0;i<nrOfComps;i++) { comps[i].setName(); } cout<<"\n"; } void makeTwist(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].spin(); } } void makeMove(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].move(); } } void showAll(Competitor comps[],int nrOfComps) { for(int i=0;i<nrOfComps;i++) { comps[i].printResult(); } cout<<"\n\n"; system("pause"); } int winner(Competitor comps[],int nrOfComps, int nrOfTwistPlaces) { int end = 0; int score = 0; for(int i=0;i<nrOfComps;i++) { score = comps[i].checkScore(); if(score == nrOfTwistPlaces) { end = 1; } else end = -1; } return end; } I'd be grateful if you would point out other mistakes if you see any.Thanks in advance.

  Read the article

< Previous Page | 27 28 29 30 31 32  | Next Page >