Search Results

Search found 1181 results on 48 pages for 'cisco asa'.

Page 31/48 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• VLAN Through Switch Doesn't Work

  - by vcsjones

  I have the following scenario: I have a Cisco Aironet 1040 access point. I have it configured with two SSIDs, each going to a different VLAN. So: SSID internal : VLAN 90 SSID guest : VLAN 70 On the router side, I have a Cisco RV220W (with the radios now turned off) and have setup VLANs with like VLAN IDs. VLAN 90 : 192.168.90.0/24 VLAN 70 : 192.168.70.0/24 As far as DHCP is concerned, each VLAN has a "DHCP Server" in the router's configuration: So with the access point connected directly to the router, everything works great. I connect to the internal network, and I get a 192.168.90.x address, and the guest network gets a 70.xxx address. Next I introduced a Cisco SG200-50 PoE switch between the router and the access point. The port is configured as a trunk port, so the VLAN tags should go right through the switch back to the router. However, when something is connected to the access point, nothing works. It isn't able to get an IP address, and manually assigning one doesn't seem to let any traffic route. Given that the access point works correctly when connected to the router directly, I believe the switch is misconfigured. What am I missing here? What can I use to better diagnose what the problem might be? It's small business equipment, so CLI access is not available. Below are screenshots of the switch's config. The access point is connected to GE2.

  Read the article

• Troubleshoot port forwarding. Could it be ISP blocking incoming connections?

  - by Gravy

  Had a new Axis IP camera delivered yesterday. Plugged into Cisco E2400 Wireless Router but having problems. Example topology: WAN IP: 10.10.10.10 (example) Cisco Router: 192.168.1.1 Axis Camera: 192.168.1.10:80 Port forwarding rules set up on router External Port: 999 Internal Port: 80 Protocol: TCP & UDP Device IP: 192.168.1.10:80 Enabled: True Trying to connect from within the lan to 192.168.1.1:80 from within browser - Works properly. Trying to connect from within the lan to 10:10:10:10:999 from within browser - Works properly. Trying to connect from outside the LAN (e.g. via 3g or another isp) to 10:10:10:10:999 from within browser - Doesnt work. I get the following errors from different machines / browsers: Safari could not open the page because the server stopped responding (IOS) The server at xx.xx.xx.xx is taking too long to respond. (firefox) This problem is not just for the Axis camera. I am also having similar problems connecting to my NAS drive. After using a web based port scanning tool, it appears as though port 999 is closed. Not certain why when I have set up port forwarding within the router. Any troubleshooting suggestions to help me determine whether the problem is with my Cisco settings / firewall or whether it could be my ISP blocking incoming connection requests? Many thanks

  Read the article

• Python (Django). Store telnet connection

  - by Shamanu4

  Hello. I am programming web interface which communicates with cisco switches via telnet. I want to make such system which will be storing one telnet connection per switch and every script (web interface, cron jobs, etc.) will have access to it. This is needed to make a single query queue for each device and prevent huge cisco processor load caused by several concurent telnet connections. How do I can do this?

  Read the article

• DHCP and DNS services configuration for VOIP system, windows domain, etc

  - by Stemen

  My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

  Read the article

• Sun Fire X4270 M3 SAP Enhancement Package 4 for SAP ERP 6.0 (Unicode) Two-Tier Standard Sales and Distribution (SD) Benchmark

  - by Brian

  Oracle's Sun Fire X4270 M3 server achieved 8,320 SAP SD Benchmark users running SAP enhancement package 4 for SAP ERP 6.0 with unicode software using Oracle Database 11g and Oracle Solaris 10. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat both IBM Flex System x240 and IBM System x3650 M4 server running DB2 9.7 and Windows Server 2008 R2 Enterprise Edition. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the HP ProLiant BL460c Gen8 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 6%. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat Cisco UCS C240 M3 server running SQL Server 2008 and Windows Server 2008 R2 Datacenter Edition by 9%. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the Fujitsu PRIMERGY RX300 S7 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 10%. Performance Landscape SAP-SD 2-Tier Performance Table (in decreasing performance order). SAP ERP 6.0 Enhancement Pack 4 (Unicode) Results (benchmark version from January 2009 to April 2012) System OS Database Users SAPERP/ECCRelease SAPS SAPS/Proc Date Sun Fire X4270 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Oracle Solaris 10 Oracle Database 11g 8,320 20096.0 EP4(Unicode) 45,570 22,785 10-Apr-12 IBM Flex System x240 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,960 20096.0 EP4(Unicode) 43,520 21,760 11-Apr-12 HP ProLiant BL460c Gen8 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,865 20096.0 EP4(Unicode) 42,920 21,460 29-Mar-12 IBM System x3650 M4 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,855 20096.0 EP4(Unicode) 42,880 21,440 06-Mar-12 Cisco UCS C240 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 DE SQL Server 2008 7,635 20096.0 EP4(Unicode) 41,800 20,900 06-Mar-12 Fujitsu PRIMERGY RX300 S7 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,570 20096.0 EP4(Unicode) 41,320 20,660 06-Mar-12 Complete benchmark results may be found at the SAP benchmark website http://www.sap.com/benchmark. Configuration and Results Summary Hardware Configuration: Sun Fire X4270 M3 2 x 2.90 GHz Intel Xeon E5-2690 processors 128 GB memory Sun StorageTek 6540 with 4 * 16 * 300GB 15Krpm 4Gb FC-AL Software Configuration: Oracle Solaris 10 Oracle Database 11g SAP enhancement package 4 for SAP ERP 6.0 (Unicode) Certified Results (published by SAP): Number of benchmark users: 8,320 Average dialog response time: 0.95 seconds Throughput: Fully processed order line: 911,330 Dialog steps/hour: 2,734,000 SAPS: 45,570 SAP Certification: 2012014 Benchmark Description The SAP Standard Application SD (Sales and Distribution) Benchmark is a two-tier ERP business test that is indicative of full business workloads of complete order processing and invoice processing, and demonstrates the ability to run both the application and database software on a single system. The SAP Standard Application SD Benchmark represents the critical tasks performed in real-world ERP business environments. SAP is one of the premier world-wide ERP application providers, and maintains a suite of benchmark tests to demonstrate the performance of competitive systems on the various SAP products. See Also SAP Benchmark Website Sun Fire X4270 M3 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Two-tier SAP Sales and Distribution (SD) standard SAP SD benchmark based on SAP enhancement package 4 for SAP ERP 6.0 (Unicode) application benchmark as of 04/11/12: Sun Fire X4270 M3 (2 processors, 16 cores, 32 threads) 8,320 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, Oracle 11g, Solaris 10, Cert# 2012014. IBM Flex System x240 (2 processors, 16 cores, 32 threads) 7,960 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012016. IBM System x3650 M4 (2 processors, 16 cores, 32 threads) 7,855 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012010. Cisco UCS C240 M3 (2 processors, 16 cores, 32 threads) 7,635 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 DE, Cert# 2012011. Fujitsu PRIMERGY RX300 S7 (2 processors, 16 cores, 32 threads) 7,570 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012008. HP ProLiant DL380p Gen8 (2 processors, 16 cores, 32 threads) 7,865 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012012. SAP, R/3, reg TM of SAP AG in Germany and other countries. More info www.sap.com/benchmark

  Read the article

• Survey: Your Plans for Adopting New Firefox Releases?

  - by Steven Chan (Oracle Development)

  Mozilla is committing to releasing new Firefox versions every six weeks.  Mozilla released Firefox 5 this week.  With this release, Mozilla states that Firefox 4 is End-of-Life and will not receive any additional security updates.  In a comment thread posted on to a Mike Kaply's blog article discussing these new Firefox policies, Asa Dotzler from Mozilla stated: ... Enterprise has never been (and I’ll argue, shouldn’t be) a focus of ours. Until we run out of people who don’t have sysadmins and enterprise deployment teams looking out for them, I can’t imagine why we’d focus at all on the kinds of environments you care so much about.  In a later comment, he added: ... A minute spent making a corporate user happy can better be spent making many regular users happy. I’d much rather Mozilla spending its limited resources looking out for the billions of users that don’t have enterprise support systems already taking care of them. Asa then confirmed that every new Firefox release will put the previous one into End-of-Life: As for John’s concern, “By the time I validate Firefox 5, what guarantee would I have that Firefox 5 won’t go EOL when Firefox 6 is released?” He has the opposite of guarantees that won’t happen. He has my promise that it will happen. Firefox 6 will be the EOL of Firefox 5. And Firefox 7 will be the EOL for Firefox 6.  He added: “You’re basically saying you don’t care about corporations.” Yes, I’m basically saying that I don’t care about making Firefox enterprise friendly. Kev Needham, Channel Manager at Mozilla later stated to PC Mag: The Web and Web browsers continue to evolve rapidly. Mozilla's focus is on providing users with the best Web experience possible, and Firefox needs to evolve at the pace the Web's users and developers expect. By releasing small, focused updates more often, we are able to deliver improved security and stability even as we introduce new features, which is better for our users, and for the Web.We recognize that this shift may not be compatible with a large organization's IT Policy and understand that it is challenging to organizations that have effort-intensive certification polices. However, our development process is geared toward delivering products that support the Web as it is today, while innovating and building future Web capabilities. Tying Firefox product development to an organizational process we do not control would make it difficult for us to continue to innovate for our users and the betterment of the Web.  Your feedback needed for E-Business Suite certifications  Mozilla's new support policy has significant implications for enterprise users of Firefox with Oracle E-Business Suite.  We are reviewing the implications for our certification and support policies for Firefox now.  It would be very helpful if you could let me know about your organisation's plans for Firefox in light of this new information.  Please feel free to drop me a private email, or post a comment here if that's appropriate. 

  Read the article

• NIC Teaming HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server NIC TEaming. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB/TLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Dual Home HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Microsoft Office 2007

  - by nardone25

  Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

  Read the article

• Bug in CDP implementation

  - by Suraj

  We are developing a Linux based ethernet switch which has 6 ports. We are done with CDP protocol. I have connected a Cisco device to port 2. When I quiery for the Cisco device, I get the reply and instead of getting lan1 (port 1 - lan0 .. port 6 = lan5), I always get the interface name as eth0. The same is the case for all the ports. What changes are required to get the correct interface name? I will be very thankful for the information. The snap packet is received in the routine snap_rcv() in the file "linux._2.6.XX/net/802/psnap.c"; Regards, Suraj..

  Read the article

• Easy Deployment Split Tunnel VPN Connection

  - by Joey Harris

  I was wondering if anybody could offer some insight as to how I can mass deploy VPN connection settings that support split tunneling. It has to work on both Mac and Windows systems though if a script is used, it obviously can be 2 separate scripts for both platforms. I will be setting up a Windows server with a file server and Exchange server and to access the file server I will have the clients go through VPN because we will have sensitive data. I don't want the servers network to be bogged down with the clients normal internet traffic so I will be needing some way to setup split tunneling on the clients without them having to put in a few commands every time to setup the static routes. Ive looked at Cisco VPN client but I want to try and stick with windows RRAS and avoid buying a Cisco VPN endpoint. Im basically looking for a good VPN client that can support split tunneling and mass deployment.

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Double VPN Network Authentication

  - by Pyromanci

  I have a project I'm working on and looking for some info. Right now I have a VPN network using Cisco Pix 501's for the vpn clients and a Cisco VPN Concentrator 3000 for the VPN Server. Since the Pix is constantly connected to the vpn, I want to add a extra level of authentication. Meaning when the user on the other end goes to access anything on the VPN they are asked for a username password before the connection is established. I've never done this sort of structure before. So I'm not even sure where to really being or even if my current hardware can do something like this, or if i need to through in some sort of radius/LDAP/Active Directory type server into the mix.

  Read the article

• Internet Dropping?!

  - by stead1984

  I have a virtual DC running DNS and Routing and Remote Access, that routes ALL workstations Internet traffic out to the Internet, this works fine but noticed that the Internet drops occasionally. I've checked with our service provider (Managed Communications) and they are adamant that it's not their fault. The Internet drops seem to affect everyone. We also have a server configured to use the same Internet service on a different network over a site-to-site VPN connection which also suffers from packet drops. I've spoken to Cisco and have done many tests with Cisco and they believe the problem is down to the ISP. I'm wondering if it's a DNS issue, as the Internet service uses OpenDNS. Any ideas?

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• How did what appears to be a virus get on my computer? (explanation of situation enclosed)

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Windows 7 - Wireless connection before login possible?

  - by EJ

  Is there a way for Windows 7 to connect to a wireless network before a user has logged in? I have found no good answers to this question elsewhere. Some say it should already be happening if I am using Windows' connection management (WLAN AutoConnect, formerly WirelessZero), but I am using that, and it is not. I can sit at the login screen for as long as you please and it will not connect (watching the router from a separate PC), moments after I login it will connect. Others have said that you need to use the manufacturer's connection management (not Windows'), and they can sometimes have the option for prelogin/prelogon connections, but I am using generic drivers. The device is a Netgear/Cisco WMP300N, with a Broadcom chipset. Netgear/Cisco and Broadcom all claim to not have drivers for Win7, but Win7 apparently comes with a functional driver.

  Read the article

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• Separating my VPN connection from my internet access

  - by Christi

  Background: Home PC is Windows XP and using Cisco VPN client; home internet connection is fast (20MB) office VPN router is Cisco RV110W; work internet connection is slow (1.5MB) With VPN connected, my home PC internet surfing is very slow. I looked this up in Google and found talk about splitting, tunneling, routing tables, etc., but I'm not sure what/how to do it. Basically, I would like a persistent VPN connection with the office resources, and at the same time, utilize my home high speed internet connection to access the internet. Can someone help me the steps as how-to?

  Read the article

• How to test Laptop NIC's throughput using a router and PC - without be bounded?

  - by 0x90

  My setup includes: Cisco router An i-7 PC running windows A laptop with high speed wifi nic, which I want to check its throughput. I would like to run an FTP server on the PC. hook the router over cables to the PC. I would like to have the PC create its own subnet accessible via the cisco router that would be hooked directly to the PC's nic. From the laptop I want to connect via wifi to the PC's wireless router and connect to the ftp server on the PC. is it possible? how do i connect the router to the PC nic and make it broadcast a subnet via wifi for my laptop to connect to? how do i configure an FTP server to operate only on this subnet?

  Read the article

• Colliding network addresses

  - by joepd

  A customer is using the same address space as the company network. I need to connect with Cisco VPN Client to the network of the customer, without affecting local connectivity. To keep all working, I connect from a VM to avoid network addressing collisions. This works, but I'm looking for a way to get rid of the VM. Is it possible to connect with Cisco VPN Client 4.8 from Windows 7, without changing the 'normal' routing? How to tell specific applications (most importantly: Putty, VNC, mstsc, psql) to resolve their routes to the VPN instead of the default network interface? Have been hearing about SOCKS-proxies, is that something that could be made to work? I fear that this is a a bit of a crude question, but I'd be happy to specify more details/context.

  Read the article

• VLAN help on ESX 4/vSphere

  - by user49032

  I setup a new VLAN with ID 153 in vSphere for my ESX4 server. The VLAN is setup for virtual machines and then I added a new NIC to the VM I want to be able to access the VM. The NIC is added to VLAN 153, but yet I am unable to ping the VLAN .1 IP that is setup on our Cisco 3750. The IP is properly setup on the Cisco 3750 because I'm able to ping the interface IP from other machines on the network. I'm guessing there must be an issue with the cabling. Any ideas?

  Read the article

• Due to the Classes

  - by Ratman21

  Why does it seem that I am always saying sorry (or in Japanese Gomennasi)?  Well I am late again for blog as you can see. The CCNA class’s part 1 (also known as CCENT) was, well more intense than all of the certification classes before it.   The teacher was cramming as much as he could into us during the week and it was hard to come home and do much more than fall into bed (Well I was doing still doing my Job search and checking up on my web sites and groups).   But I didn’t have much left in the way of blogging (Which by the way is now in 3 different sites). Even though it was hard some times, I really liked the fact I was getting back to something like (and mean really like, in fact I like Cisco routers than some people I know). At the class, I got some software that allows me to simulate setting up and troubles shoot Lan’s or Wan’s.   When we weren’t getting facts for the test thrown at us, we were doing labs with this software. It was fun for me to be able to use the CISCO router commands and trouble shoot router issues. Even if it was just a sim. So now it is study, study, take practices tests and do the labs. I took the week end and more off after cram CCENT week but, now I am back at it.  Also I could not keep up with my Love Dare book during week of the class. No I did not stop or forget what I already learned. I just put the next dare on hold. Well the hold is off starting tomorrow and tonight I think I am going to write a new cover letter. Let’s see what else I can get done tonight. Hmm I think I will try to do a sim of my home wireless LAN and study for CCENT test in about 3 weeks.   So see you tomorrow (I hope).

  Read the article

• Oracle SOA Suite customer panel: Successful Application Integration & SOA Projects

  - by Simone Geib

  At the recent SOA Suite customer panel, Roger Brown from UNS Energy, Fabio Ravagni from Cencosud and Paras Jain from Cisco discussed their recent SOA Suite implementations, business drivers and challenges, architecture and lessons learned. Roger started by describing how UNS redesigned their internet portal to improve their customer experience and reduce manual steps in their business processes. Through the use of Oracle Service Bus, Oracle BPEL Process Manager and Oracle Business Activity Monitoring, they provided more self-service functionality, automated their business processes and increased the use of their web site by 12.98% for number of visits and 33.58% for average visit duration. The screenshot below shows the UNS architecture: > Next Fabio described the challenges Cencosud faced through continuous expansion of their business, different standards and levels of expertise and large volumes of information. By introducing Oracle SOA Suite, Oracle Data Integrator and Oracle Enterprise Repository, and with the help of Oracle Consulting, they significantly simplified their integration model, reduced their maintenance effort and increased their integration governance. The picture below shows the implemented solution with so far more than 400 services in production and more than 20 ongoing projects, which will make use of the new integration platform. > Last, but not least, Paras discussed the challenges the Webex division of Cisco faced with a highly manual service fulfillment process, multiple data sources and the resulting large room for errror and delay in customer time-to-service. Through a redesign of their order fulfillment process and the introduction of Oracle SOA Suite (see below), they significantly improved their SLAs, eliminated duplicate orders, provided higher visibility into the order process and aligned business and IT. For more information about Oracle OpenWorld SOA & BPM Session, please see the Focus on SOA and BPM document

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >