Search Results

Search found 21327 results on 854 pages for 'display resolution'.

Page 31/854 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Why am I stuck at 640x480 on an Optimus hybrid-graphics system?

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• Screen Resolution Problem with Ubuntu 14.04 and VirtualBox

  - by user3341257

  Environment: Lenovo T530 running Windows 7. Have installed Ubuntu 14.04 on a virtual machine using VM Virtual Box. Have installed all the updates from both Virtual Box and Ubuntu. Problem: While in Ubuntu's desktop and other Ubuntu initiated programs, the window is reduced to about 3x4 inches showing in the middle of the rest of my regular Virtual Box window. I am seeing only the upper right hand of the screen output of what I would normally see. Please help. I've seen How do I install Guest Additions in a VirtualBox VM? But, none of these answers works in 14.04.

  Read the article

• Depth Map resolution shifting

  - by user3669538

  the problem is with shadow mapping as you can see, actually it works fine but in a certain condition that the Depth Map size must be equal to the size of rendering buffer, I use an infinite directional light so if the window is 800x600 the depth map must be 800x600, and when i change the size of the shadow map to be 900x600 it starts to be shifted and when it's size be 1024x1024 it also shifts till it disappears the GLSL shadow function float calcShadow(sampler2D Dmap, vec4 coor){ vec4 sh = vec4((coor.xyz/coor.w),1); sh.z *= 0.9; return step(sh.z,texture2D(Dmap,sh.xy).r); } here's the result when it's the same size as the window Colored result & Depth Map and here's the shifted result, as you can notice the depth map is exactly as the previous one with the addition of white space to the right. Colored result http://goo.gl/5lYIFV Depth Map http://goo.gl/7320Dd

  Read the article

• setting the position in different resolution

  - by Moaz

  I have a normal game window which is 640*480, and everything is fine, but when I try to maximize the window, the objects translate to different positions on the screen, for example If I have a circle which is drawn at the center in the normal window, when I try to maximize it, it shifts away from the center of the screen. How do I adjust it so it draws at the center in both normal window and maximized window ?

  Read the article

• Domain resolution - local first then external

  - by stefgosselin

  I would like to know how I can configure my dns settings so that domain is resolved locally first, then if not resolved it goes to external DNS. I had this working before, I am using Ubuntu through a VM and need the local domain to resolve first but since I have upgraded I had to reconfigure network and now it works only external, local host file does not seem to even be used. Is there an easy way to check this out? I did slap it up in google but no specific answer seemed to match my case and I too tight on delivery deadline to test-and-try different approaches. You guys rock, thanks.

  Read the article

• javascript how to display text when mouse over input text box?

  - by Fernando SBS

  How to display text when mouse over an input text box the simplest way (no css, or etc)??

  Read the article

• Drupal -- How to display N nodes of a type X?

  - by klamzo

  How to display N nodes of a type X?

  Read the article

• Virtualized Screen Resolution

  - by Jim R

  I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

  Read the article

• Virtualized Screen Resolution

  - by Jim R

  I have a 64 bit Ubuntu 9.10 workstation with two virtualized guest OSes using KVM/QEMU. Also both 64-bit. One is Fedora 12 the other is beta of Ubuntu 10.04. The problem is that I would like to use a larger size display that is configured by default. Both guest OSes have a maximum screen resolution of 1024x768. I would like to increase this to something like 1280x900 or 1440x900. The resolution of the host system is 1920x1080. This configuration appears to be a result of the installation detecting the resolution being reported by the virtual screen during installation. The only information I have found on the subject suggests modifying the xorg.conf file in the /etc/X11 directory. Neither guest system has this file. I tried creating one by hand in the Fedora system and managed to render it completely unusable. Not a big deal as this is recently installed and can be reinstalled easily. Is what I want to do possible? If so, how do I accomplish it?

  Read the article

• Nvidia Linux Driver Huge Resolution

  - by darxsys

  I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

  Read the article

• DIrect videos and slideshows fullscreen from another display

  - by neurino

  I have 3 displays: 1 control display I can see 2 40" Full HD displays I can't see my need is to play videos and presentations fullscreen on the two 40" screens while being able to control them from the control display. So far I am able to achieve this with a cumbersome set of keyboard shortcuts like: open VLC on control display send to left display with Win + Shift + Left go fullscreen with f and more combinations to restore, get VLC on control display etc. This is really error prone and not professional. Also I wish I have a media player and a slideshow player that can: send the same video / slideshow to the two 40" displays at the same time send two different videos / slideshows, one each 40" display having all controls on the central display, the only one I can see. Any advice welcome, thank you for your support.

  Read the article

• Inside The Kindle Paperwhite’s Display [Video]

  - by Jason Fitzpatrick

  By far the most praised feature of the new Amazon Kindle Paperwhite ebook reader is the new display; this video takes you behind the scenes with the design team and highlights what exactly makes the evenly lit display work so well. Accounting for the promotional nature of the video, it’s still fascinating to take a look at how they crafted the front plate of the display to yield such an even front-lit effect. You can read more about the Kindle Paperwhite here. [via ExtremeTech] HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• Display clock frequency per core using Conky

  - by cfbaptista

  I am using Conky to display a lot of information of my system. I managed to display the load percentage per core. But I do not know how to display the clock frequency of each core. What I have now is: ${font sans-serif:bold:size=8}PROCESSORS ${hr 2}${font} CPU1: ${cpu cpu1}% $alignr ${freq} MHz $alignr ${cpubar cpu1 8,60} CPU2: ${cpu cpu2}% $alignr ${freq} MHz $alignr ${cpubar cpu2 8,60} CPU3: ${cpu cpu3}% $alignr ${freq} MHz $alignr ${cpubar cpu3 8,60} CPU4: ${cpu cpu4}% $alignr ${freq} MHz $alignr ${cpubar cpu4 8,60} CPU5: ${cpu cpu5}% $alignr ${freq} MHz $alignr ${cpubar cpu5 8,60} CPU6: ${cpu cpu6}% $alignr ${freq} MHz $alignr ${cpubar cpu6 8,60} CPU7: ${cpu cpu7}% $alignr ${freq} MHz $alignr ${cpubar cpu7 8,60} CPU8: ${cpu cpu8}% $alignr ${freq} MHz $alignr ${cpubar cpu8 8,60} But this only gives me the global clock frequency and not the individual clock frequency per core. Does someone know how to get the individual clock frequency per core? System information Linux Mint 13 KDE, 64 bit (based on Ubuntu 12.04) Intel i7-2670QM (quad core with multithreading)

  Read the article

• How can I set a second screen (DISPLAY=:0.1) as the default gnome display?

  - by Pedro Silva

  Due to various reasons, I have my main monitor set as the secondary display in xorg.conf. I would like to have gnome initialize metacity, gnome-panel as running primarily on :0.1, instead of :0.0. Is this possible at all? To clarify, this is a laptop with its LCD turned off. My main monitor is connected to the VGA out and is driven by the nouveau driver for NVIDIA; a secondary monitor is on a displaylink usb-vga donverter. The seconday monitor is set in xorg.conf as the primary display (no way around it). I can do things like DISPLAY=:0.1 gnome-terminal to run applications on the main monitor. My question is whether it is possible to do this (GNOME-) system-wide.

  Read the article

• Non-unique display names?

  - by Davy8

  I know of at least big title game (Starcraft II) that doesn't require unique display names, so it would seem like it can work in at least some circumstance. Under what situations does allowing non-unique display names work well? When does it not work well? Does it come down to whether or not impersonation of someone else is a problem? The reasons I believe it works for Starcraft II is that there isn't any kind of in-game trading of virtual goods and other than "for kicks" there isn't much incentive to impersonate someone else in the game. There's also ladder rankings so even trying to impersonate a pro is easily detectable unless you're on a similar skill level. What are some other cases where it makes sense to specifically allow or disallow duplicate display names? (I have no idea what to tag this as. I went with game-design because I needed at least 1 tag and I don't have rep to create new ones yet.)

  Read the article

• Attach Keyboard/Mouse to X Display in Dell XPS L502x Dual Video Cards (Intel/Nvidia HDMI)

  - by lcoronelp

  The idea: Use a second monitor in Dell XPS L502x with HDMI port in Ubuntu 12.04 The process: I connect the HDMI cable to monitor. I read this and I have video in HDMI monitor with Bumblebee and this commands: optirun nvidia-settings -c :8 DISPLAY=:8.0 firefox I have created a second keyboard/mouse master group with xinput with this solution. The problem: The second monitor (Display 8) doesn't recognize the keyboard/mouse and I cant use it. The question: Do you know some command to attach the keyboard/mouse master group to Display 8? I think that xinput -set-cs may work but it does not.

  Read the article

• Switching to an external display, when primary is broken

  - by Shazzner

  I've successfully install Ubuntu 11.10 Desktop (x86) on an old(er) laptop that unfortunately has a broken screen, so there is an external monitor plugged in. On the livecd it come up on the secondary display just fine and I was able to install ubuntu and everything. Unfortunately when I reboot into Ubuntu proper now, the secondary display is off and I'm literally driving blind here trying to switch it to the secondary display. Using Nvidia open source drivers. Things I've tried: Rebooting back into livecd, mounting the partition and trying in vain to find a config file (it uses the open source drivers so no Xorg.conf I could edit manually) Trying to blind-type xrandr settings into what I hope is terminal: xrandr --output VGA1 --auto (nothing happened) Trying to blind install openssh-server so I could ssh into it and maybe configure it from my working computer. For some reason though, no luck. Ubuntu really should default to expanding to all screens for this use case.

  Read the article

• Ubuntu 11.10 boot: xhost: unable to open display

  - by paulus_almighty

  I've had this papercut for a while now, it's time it was fixed. When I boot up Ubuntu, choosing "Ubuntu...generic" from the grub screen, Ubuntu fails to load. It just sits at the driver/module loading screen. What seems to be the most significant line in this output is "xhost: unable to open display" If I choose "Ubuntu...(recovery mode)" from grub then it loads OK. I don't get why this is. Out of interest I tried enabling boot error logging with #/etc/default/bootlogd BOOTLOGD_ENABLE=Yes but I'm not seeing anything in that file. ETA: I've had this problem since fresh install of 11.10. Here's lshw: $ sudo lshw -C display *-display description: VGA compatible controller product: GF104 [GeForce GTX 460] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:03:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f6000000-f7ffffff memory:e0000000-e7ffffff memory:ec000000-efffffff ioport:bf00(size=128) memory:e8000000-e807ffff

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• Dell XPS L502Xnot detecting monitor-TV

  - by Guilherme Z. Santos

  I'm running Ubuntu 12.04 LTS on a Dell XPS L502X and when I connect the HDMI cable from the TV to the computer Ubuntu detects nothing at all, It works perfectly fine in Windows 7 though. I've already went to the Display control, plugged and unplugged the TV, clicked the Detect Displays button, and nothing. Do I have to activate the HDMI output or something? Because I used another computer with a VGA output and it worked perfectly.

  Read the article

• Displaylink USB show "Logo / Loading" on monitor

  - by Ken Le

  I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

  Read the article

• Replace LightDM with MDM on Ubuntu 13.10

  - by Daniel

  I'm trying to replace LighDM with MDM on Ubuntu 13.10, but there already is package in Ubuntu sources called mdm. It's not display manager, but "The Middleman System"... So the PPA install doesn't work. I tried installing .deb package and it changed login screen, but gave me an error message after login and then X stopped. I had to revert back... Any ideas on how to install mdm on Ubuntu 13.10...???

  Read the article

• How can I stop the panel from showing on an external projector/monitor?

  - by hellocatfood

  In Ubuntu 10.10 (and possibly previous versions), when I connected my laptop to an external source (monitor/projector) and set it not to clone my desktop the display on the external source would not show the (gnome-)panel (just a full-screen desktop with no icons). Since upgrading to Ubuntu 11.04 (using Unity) when I now connect the external source has the panel on there. Is there any way to revert to the previous behaviour in 11.04?

  Read the article

• iPhone 4.0 Screen Resolution and writing robust code...

  - by Magic Bullet Dave

  Does anyone know what will happen with existing apps when they run on the iPhone 4.0 in terms of the new screen resolution? I am assuming, just like developing for the iPad that there should be no hard coded screen resolutions in your code. I'd also like advice on the best way of writing robust code to work well on any device. For instance, detecting the screen resolution is not enough - on the iPad the screen is physically bigger so you can display more items on it. On the new iPhone the screen is the same physical size but higher resolution, so the likely thing is that you wont want to display more items, just higher resolution versions of them. Any help would be useful, Regards Dave EDIT: I have read the other similar posts, I guess what I really would like to know is what is the recommended way to write code for all App Store devices in a robust way so they a) all work b) make best use of the device.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >