Search Results

Search found 1702 results on 69 pages for 'guy'.

Page 31/69 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• SCSI vs SATA? Is SCSI "actually" better?

  - by earlz

  Well, I was talking with a guy about servers the other day. I was a bit shocked whenever I asked him if there was any significant difference between SCSI and SATA and why he always uses SCSI. (note, I'm not sure if by SCSI he meant SAS) He told me that SCSI is always faster and that the drives are always more reliable.. I mean, this seems like a bold statement. He told me something about how SCSI will always be faster than SATA because the OS sends the SCSI (controller?) a request to get a file and it will build the file inside of the SCSI controller, instead of searching all over the disk.. which I do not understand how that would work, so I figure it is BS. SAS and SATA currently have equivalent data rate speeds.. Is there any true backing for his reasoning that SCSI is always faster and more reliable than SATA?

  Read the article

• Packets marked by iptables only sent to the correct routing table sometimes

  - by cookiecaper

  I am trying to route packets generated by a specific user out over a VPN. I have this configuration: $ sudo iptables -S -t nat -P PREROUTING ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A POSTROUTING -o tun0 -j MASQUERADE $ sudo iptables -S -t mangle -P PREROUTING ACCEPT -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -P POSTROUTING ACCEPT -A OUTPUT -m owner --uid-owner guy -j MARK --set-xmark 0xb/0xffffffff $ sudo ip rule show 0: from all lookup local 32765: from all fwmark 0xb lookup 11 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table 11 10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6 10.8.0.6 dev tun0 scope link 10.8.0.1 via 10.8.0.5 dev tun0 0.0.0.0/1 via 10.8.0.5 dev tun0 $ sudo iptables -S -t raw -P PREROUTING ACCEPT -P OUTPUT ACCEPT -A OUTPUT -m owner --uid-owner guy -j TRACE -A OUTPUT -p tcp -m tcp --dport 80 -j TRACE It seems that some sites work fine and use the VPN, but others don't and fall back to the normal interface. This is bad. This is a packet trace that used VPN: Oct 27 00:24:28 agent kernel: [612979.976052] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976105] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976164] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 Oct 27 00:24:28 agent kernel: [612979.976210] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976269] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976320] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976367] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:24:28 agent kernel: [612979.976414] TRACE: nat:POSTROUTING:rule:1 IN= OUT=tun0 SRC=XXX.YYY.ZZZ.AAA DST=23.1.17.194 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=14494 DF PROTO=TCP SPT=57502 DPT=80 SEQ=2294732931 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6E01D0000000001030307) UID=999 GID=999 MARK=0xb and this is one that didn't: Oct 27 00:22:41 agent kernel: [612873.662559] TRACE: raw:OUTPUT:rule:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662609] TRACE: raw:OUTPUT:policy:3 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662664] TRACE: mangle:OUTPUT:rule:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 Oct 27 00:22:41 agent kernel: [612873.662709] TRACE: mangle:OUTPUT:policy:2 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662761] TRACE: nat:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662808] TRACE: filter:OUTPUT:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb Oct 27 00:22:41 agent kernel: [612873.662855] TRACE: mangle:POSTROUTING:policy:1 IN= OUT=eth0 SRC=XXX.YYY.ZZZ.AAA DST=209.68.27.16 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=40425 DF PROTO=TCP SPT=45305 DPT=80 SEQ=604973951 ACK=0 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A03A6B6960000000001030307) UID=999 GID=999 MARK=0xb I have already tried "ip route flush cache", to no avail. I do not know why the first packet goes through the correct routing table, and the second doesn't. Both are marked. Once again, I do not want ALL packets system-wide to go through the VPN, I only want packets from a specific user (UID=999) to go through the VPN. I am testing ipchicken.com and walmart.com via links, from the same user, same shell. walmart.com appears to use the VPN; ipchicken.com does not. Any help appreciated. Will send 0.5 bitcoins to answerer who makes this fixed.

  Read the article

• Can admins monitor my activity locally even when I use a VPN?

  - by Arjun Create

  My school has one of those super overreacting web blockers (specifically Fortisnet) that blocks things that should be accessible by a high-school senior trying to research projects. Despite many students' complaints the administration's hands are tied due to parents' complaints. I have setup a VPN account from http://www.vpnreactor.com. With this I am able to bypass the blocker. I know this service hides my IP from websites and servers on the web. I also know that the school pays an IT guy just to monitor sites and network traffic that the students are using. Basically, will he be able to see my network traffic? More importantly, will he be able to trace it to my computer or its MAC address? I am connecting over Wi-Fi, not ethernet.

  Read the article

• Can a 32-bit RHEL4 userland work with a 64-bit kernel?

  - by James

  Is there a way to change an i386 RHEL4 machine to run an amd64 kernel, but ensure that it still builds software into same i386 binaries? On Debian this seems quite straightforward: just install an amd64 kernel (worst case, build one like this guy: http://www.debian-administration.org/users/jonesy/weblog/1) and prefix everything with "linux32". Then everything that considers uname -m will be unchanged, I just need to handle the few cases that consider uname -r. What is the Red Hat equivalent? Is the only way a full 64-bit installation on another disk and then chrooting back to the 32-bit system before anyone builds anything? (Even the best examples of that seem to be Debian-based.) Background: We make a large system that runs on (a variant of) i386 RHEL4. However, some of the larger RHEL build machines now have enough RAM that they might benefit from going 64-bit (for the kernel and maybe some of the bigger build steps). Our build system doesn't support cross-compilation.

  Read the article

• Installing CentOS on remote machine.

  - by vijay.shad

  Hi, Can I do a fresh install of centos linux distribution on a remote machine? I have got a machine with windows NT system in a remote location. Now i want to use that system as my deployment machine. To proceed on my plan i need to install a linux os(have chosen CentOS). The guy with machine there is not very much aware of the installation process of any OS. So i thought of the remotely install. Please give me some insight how can i achieve this?

  Read the article

• Symmetrix gatekeepers on Solaris 10

  - by Milner

  I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

  Read the article

• Memeory Leak in Windows Page file when calling a shell command

  - by Arno

  I have an issue on our Windows 2003 x64 Build Server when invoking shell commands from a script. Each call causes a "memory leak" in the page file so it grows quite rapidly until it reaches the maximum and the machine stops working. I can reproduce the problem very nicely by running a perl script like for ($count=1; $count<5000; $count++) { system "echo huhu"; } It is independent of he scripting language as the same happens with lua: for i=1,5000 do os.execute("echo huhu") end I found somebody describing the same issue with php at http://www.issociate.de/board/post/454835/Memory_leak_occurs_when_exec%28%29_function_is_used_on_Windows_platform.html His solution: Firewall/Virus Scanner does not apply, neither are running on the machine. We can also reproduce the issue on other Developer Machines running XP 64, but not on XP 32 Bit. The guilty guy for the allocation is C:\WINDOWS\System32\svchost.exe -k netsvcs which runs all the basic Windows services. Does anybody know the issue and how to resolve it ?

  Read the article

• Why didn't cable select work?

  - by jldugger

  I got roped into doing tech support for a friend of the family. Obviously I'd already failed to hide my powers, ala Penny Arcade. Anyways, the guy bought a DVD burner OEM from Microcenter, and asked me to install it. So I stopped by before and thought I'd be slick and use Cable Select on the jumpers. I didn't get a chance to test it before it I had to leave, and it seems that this didn't work. I came back this week to investigate, and he explains he's confused how none of the software he downloaded was able to burn. So on a whim I switch it to explicit master / slave, and it starts working fine. Whoops. Well, at least it's not the extra crap he found and downloaded for free from the internet. Why doesn't setting both jumpers to Cable Select solve this?

  Read the article

• SonicWall HA "gotchas"?

  - by Mark Henderson

  We're looking to move away from PFSense and CARP to a pair of SonicWall NSA 24001 configured in Active/Passive for High Availability. I've never dealt with SonicWall before, so is there anything I should know that their sales guy won't tell me? I'm aware that they had an issue with a lot of their devices shutting down connectivity because of a licensing fault, and they have an overtly complex management GUI (on the older devices at least), but are there any other big "gotchas" that I need to be aware of before committing a not insubstantial amount of money towards these devices? 1If you're outside the US, the SonicWall global sites suck balls. Use the US site for all your product research, and then use your local site when you're after local information.

  Read the article

• Do most "normal" people use metro or desktop in Windows 8

  - by ihateapps

  Just curious since I don't fit the definition of a "normal" computer user nor have my friends or relatives upgraded to Windows 8 yet. Are most people in the "wild" (i.e. the "guy in starbucks" or "your friend who works as an auto tech". not you since you are on SU) using metro apps regularly to the point where the desktop is pointless or are they sticking with the desktop? I've gotten mixed statistics from Google. I'm asking for your personal anecdotal opinion based on what you notice in the wild.

  Read the article

• Networking conflict - What is the most common default computer name?

  - by John

  I recently had to change the name of my computer to log onto a public wi-fi spot, because a computer with my name was already logged on. (I asked a guy there what to do after it said there was already a computer named "Dell(omitted)" logged on.) I've never been at a wifi spot that you had to log into before. I didn't even notice what the computer's name was before. My question is what are the most common default computer names. I'm curious. How often does this sort of problem happen? (I read via Google that Redhat linux default to "localhost" and Toshiba laptops default to "Toshiba.") Somebody probably keeps statistics. (I was referred here from serverfault.com) Thanks

  Read the article

• What would you use to keep track of all the random information about your LAN/Enviroment?

  - by agnul

  Say you work in your average anarchy... no appointed IT guy, no Office-Manager whatsoever, just developers working in free-for-all mode and a couple of non technical people around for admin (non IT) stuff. What would you use to keep track of Hardware / Software inventory Backups of OS images, Drivers, and all that LAN configuration information Passwords for all the systems Currently I'm thinking of having some sort of wiki + web server on our only ''server-class'' machine, but then I fear I'd be the only one who would go through the hassle of adding information in the wiki... So, have you been through that? What would you suggest?

  Read the article

• Inexpensive degaussers or HDD shredders?

  - by Nicholas Knight

  I do a lot of work for a small cash-strapped business that has a lot of active hard drives, most are consumer-grade SATA of about five years of age, and predictably they are dying at an increasing rate, and a lot of the time they can't even be detected, let alone complete a zero-out cycle. Right now those drives are just being stored, but that can't continue forever. We've got a couple bad LTO tapes it'd be nice to deal with, too. There are very real security and legal issues that make dropping them off with someone who claims they'll be properly destroyed a gamble. I've looked around at degaussers and HDD shredders, and the ones that don't look like they come from some guy in his basement all seem to be $3000+, which is hard to swallow right now. Is there anything out there in the $500-1500 range that you would recommend? (Speed isn't a big issue, if it takes several minutes or even hours per drive, that's completely OK, we've only got 10 or so thus far.)

  Read the article

• Windows 7 x64: 3900mb of 4gb RAM usage, even when (almost) nothing running.

  - by user34630

  As the title suggests, I am having a problem with memory usage. I have had my computer (Vaio AW11Z/B laptop) for over a year now, and it was running perfectly until I guess a day or two ago. Now programs randomly crash, the mouse lags around the screen and the memory usage is going through the roof for no apparent reason. I am having exactly the same problem as this guy: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/1f716693-0a46-473e-9dc0-8c2b1a058443/. I think he explains it better. Anyone had a similar issue? What's going on? I don't think it's a virus/adware thing. Thanks very much for any help.

  Read the article

• Screen is black at login screen if display driver is enabled

  - by Amir Rachum

  I have a Lenovo x200 and recently its screen didn't work, so I took it to a repair lab. The guy told me they replaced the screen inverter. I powered up the laptop and the ThinkPad logo was shown, so I was happy. When I got home the computer would boot up, then instead of the logon screen, I got a black screen. Went to safe mode, disabled the display adapters, reset the computer, and I got a clean boot. Then I tried to reinstall the drivers, and it just led to the same condition. My video card is (from device manager): Mobile Intel(R) 4 Series Express Chipset Family. Now my laptop works as I'm working with display drivers disabled, but without display drivers I can't watch movies, etc. Any solution to this problem? Edit: I plugged in an external monitor and it works on it with display drivers enabled. However, it does not find the laptop monitor.

  Read the article

• How can I set up a rule in outlook for an alias account?

  - by lucy

  I have 4 email aliases that all deliver to the same outlook inbox. 2 of them are stop@ addresses to be included in a mailing unubscribe link. Using the simple rules in outlook doesnt work, unless we set them to move emails titled stop, but for ease of unsubscribing, we do not want responders to have to do anything other than send a blank email to the stop@ address. Our IT guy tried to sort this out, by setting up a rule that all emails sent to stop@ got into a specified folder (stop folder created within inbox), but now, all that happens is all my emails go into the wrong boxes!!! Any help would be appreciated

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac

  - by ling

  I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

  Read the article

• Laptop Locking Up

  - by David

  I am having a very weird issue on a Lenovo W510 laptop. It will lock up randomly. I have had it lock up during post, during the boot-up of Linux, during login, and after the login. The following are tests that I have performed on the laptop. I ran memtest I took out the extra memory module. I swapped the HDD with another HDD that had Windows 7 on it. (It BSOD'd, and before anyone could possibly read the error line, it restarts.) I tried taking the battery out and booting with only the Power cord. The only other options I can think of the problem being are the motherboard or the PSU. If anyone has any advice, I appreciate it. If not, the HP guy will be here in a few days to fix it. I would just love to call them up and tell them that the service is no longer needed.

  Read the article

• Is my website running on an iPhone?

  - by Stefano Borini

  Provocative question, but in any case, this is what it would appear... unless there's some other reason, of course. In my cystat wordpress log, I obtained the following entry IP Browser OS Date Method Type URL 127.0.0.1 Safari 419.3 iPhone July 30, 2009 7:39 pm GET BLOG /blog/ The IP address is the IP of the visiting client. It's clear that this is not possible. Why do I get 127.0.0.1 as IP? cystat bug? some weird network trick I am not aware of? or is my website really running on an iPhone, and the guy at the applestore is reading my blog ?

  Read the article

• Emails Generated From Our Linux Server are Blocked By Our Exchange Server (That Has Barracuda)

  - by Scott

  We have our company website hosted on a Linux machine. It is sending mail via postfix. The emails are working and being sent to all email clients like Gmail. However, we are not receiving the emails on our exchange server. When we look at the logs, we see that the connection is being refused, presumably by the exchange server. postfix/qmgr[11865]: DA6D42FF13: from=<[email protected]>, size=3166, nrcpt=1 (queue active) postfix/smtp[12474]: connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused postfix/smtp[12474]: DA6D42FF13: to=<[email protected]>, relay=none, delay=172915, delays=172914/0.03/0.07/0, dsn=4.4.1, status=deferred (connect to mail.sanitizeddomain.com[XXX.XXX.XXX.XXX]:25: Connection refused) We do run Barracuda. We cannot telnet from the linux machine to our mail server b/c we get the same message.

  Read the article

• Install multiple Linux OS using WUBI

  - by soul

  I want to install Linux Mint, and Ubuntu on my laptop using Wubi installation. I already installed Ubuntu, but when I launch the Wubi installer for Mint. I got this guy: Does it mean to say that I can only install one os using the wubi? Do you know of any solution to this problem, except by installing mint using the usual way. I have XP and Windows 7 installed on the machine. That's why I'm using Wubi so that I won't get into troubles.

  Read the article

• Email bounce back 550 5.1.1 recipient rejected

  - by Stan

  A client recently switched to Exchange Server / Outlook for their email. Since then emails from my company to any email address at their company bounce back from the System Administrator with this error: Your message did not reach some or all of the intended recipients. Subject: Email Solution Sent: 12/12/2012 11:08 AM The following recipient(s) cannot be reached: '[email protected]' on 12/12/2012 11:08 AM 550 5.1.1 <[email protected]> recipient rejected Looking in the Message Options of the bounce back email shows no data in the Internet Header field. My client's IT guy says we're not being blocked, but I cant think of any other reason the bounce would occur. Any suggestions on what questions to ask or how to fix this would be helpful. I'm using a desktop version of Outlook 2007 and connecting through my ISP. Thanks.

  Read the article

• What software allows editing text with furigana professionally?

  - by Julian

  I'm studying Japanese and need to write a lot of text with furigana. I've been using Word so far but my main concern is that entering furigana is not only quite clumsy (no hotkey) but what's more important is that once entered, you can't globally change either its font or its size; you need to change them one by one. This is a deal-breaker for me since my average text contains hundreds of entries. There is a hack you can do as pointed out by another guy on SU but I found that by using it I could (and did) break my document easily. My question is: is there a software that is specifically designed to work with Japanese text that also has its UI in English? As stated above, I need something that has furigana editing as a first-class citizen.

  Read the article

• Terrible Performance with SATA Drives on Dell PowerEdge, steps to troubleshoot?

  - by Tom

  I had asked this question earlier and the question went missing so here it is again. Bought a DELL Poweredge 2950 to use as in-house QA Server. Disk performance is beyond terrible, 1000-4000 ms response time on the drive with our SQL Server database .mdf. Sql Server disk queue upwards of 300 at times. I'm a software guy, can anyone help me with steps to determine the issue? I don't know what RAID controller it has, how can I determine that? I'm speculating it could be BIOS issue. Perhaps the server used to have another kind of drive in it and when I added SATA the ??? buffer size is wrong??? Perhaps I chose wrong options (chose defaults) when setting up the RAID 1 arrays? I thought RAID 1 was a performance array?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >