Search Results

Search found 2504 results on 101 pages for 'hp envy'.

Page 31/101 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• PC won't post after replacing mobo

  - by Dan

  I am trying to fix an older HP desktop (~2 yrs old) that didn't seem to have video working. The video card on the machine was integrated. After some debugging, it looked to be the mobo, so I went out and got a new one (also with integrated video). Now, it pretty much does the same thing. Here's the symptoms: no video, doesn't post at all, fans DO spin (both chasis and CPU). Any other ideas? I suppose it could be the CPU, but I would think if it was, it would at least post.

  Read the article

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• About Eucalyptus Virtualization Support

  - by rammayur

  I am having hp 540 notebook with processor core 2 duo. I have installed CLC,CC,SC and Walrus runs fine when I try to run NC, I get error "Not virtualization enabled" means my laptop does not support virtualization. I got it. Then, In my college, there is Dell desktop PC having processor Core 2 Duo. But it has virtualization enbled.So I get confused. How same thing has different effects. So my questions are Which thing is essential for Virtualization?? What should I upgrade in my Laptop Processor or buy a new one?

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• boot failure trying to install linux distro from a cd

  - by jdamae

  Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

  Read the article

• Why does the CPU usage reach 100% when laptop is plugged in?

  - by Mayank

  I have an HP Elitebook 8440p with Windows 7 Ultimate, i7 Processor and 8 GB RAM. For the last couple of days, when I plug-in my laptop for charging, the CPU usage shoots up to 100% and remains there for around 15 minutes. No offending process shows up in Task Manager/Process Explorer but the laptop is practically unusable for that time. The CPU usage becomes normal when I remove the power cord but shoots up again when plugged back. This is happening with different power adapters/wall sockets so it might not be a faulty adapter issue. Why is this happening and any pointer to resolve this issue?

  Read the article

• Windows 2012 Cluster on P6300 SCSI-3 Persistent Reservation issues

  - by Bruno J. Melo

  Scenario: 1 HP 6300 with latest XCS version 1 Command View 10.1 + with hosts defined as Windows 2008 2 BL460c Gen8 Servers with SPP 2012.10 and Windows Server 2012 Datacenter Edition with all the updates + MPIO feature enabled DSM v4.03.00 Cluster Analyser Tool triggers this error: Test Disk 0 does not support SCSI-3 Persistent Reservations commands needed to support clustered Storage Pools. Some storage devices require specific firmware versions or settings to function properly with failover clusters. Please contact your storage administrator or storage vendor to check the configuration of the storage to allow it to function properly with failover clusters. Any ideas? Thanks for your help!

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• Windows XP/Firewall -- Can't open UDP port 9100 for JetDirect sharing

  - by Barton Chittenden

  I'm setting up my Dad's laptop (Vista) to print to an HP Deskjet printer attached to a Windows XP Desktop box. The XP box is running Windows firewall. Laptop sits on 192.168.1.66, Desktop 192.168.1.65. I set up logging in the firewall, and determined that it is dropping inbound packets on TCP port 9100, used by JetDirect, the printing protocol. I set up an exception on TCP port 9100, allowing access to the local subnet. There's also an entry under the 'allow applications' tab which was marked for the exact printer model. I selected this as well, then tried to print again... I see more dropped packets from 192.168.1.66 to 192.168.1.65 for TCP port 9100. What do I try next?

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• Black spray (?) on a laptop's heat sink assembly

  - by arnehehe

  We have a HP Pavilion DV3 4000SB that was given an error on startup that the fan was having problems (System Fan 90b error message) So I decided to open the laptop up and clean the fan, as that seemed the easiest option. Upon opening it up, at first I froze and thought "No wonder! The whole thing's burnt!", but then I started thinking it looked more like someone used a spraycan on it. I looked up a video on youtube of someone disassembling his Pavilion and noticed there wasn't any of the black on his, so my question here is: Have any of you encountered this, or know what it is? Or if it's something that could point to a problem?

  Read the article

• Best way to copy large amount of data between partitions

  - by skinp

  I'm looking to transfer data across 2 lv of an HP-UX server. I have a couple of those transfers to do, some of which are mostly binary (Oracle tablespace...) and some others are more text files (logs...). Used data size of the volumes is between 100Gb and 1Tb. Also, I will be changing the block size from 1K to 8K on some of these partitions... Things I'm looking for: Guarantees data integrity Fastest data transfer speed Keeps file ownership and permissions Right now, I've thought about dd, cp and rsync, but I'm not sure on the best one to use and the best way to use them...

  Read the article

• Using Power Adapter With Slightly Different Rating - Close Enough? [closed]

  - by Ed Liddiard

  Possible Duplicate: Laptop power supplies, does current matter? I'm in Colombia, South America and the power adapter on my HP Pavilion DV4-1125nr laptop died. The adapter is rated at 65W input 1.6A & output 18.5V 3.5A. A friend found me a Dell adapter rated at 65W input 1.5A & output 19.5V 3.34A. Both have center + polarities. Seems very stable and not having unusual heat problems. Do you think it is safe to use this adapter without harming my laptop?

  Read the article

• Remote RIB iLO on Proliant via RIBCL

  - by Wudang

  I'm trying to automate a process for our Ops. The process requires that some windows servers running on blades are shut down, left down for a few hours, the restarted when some other processes complete. This is done by an op logging on to each blade's iLO web interface to stop and start. I've been trying to automate this with HP's cpqlocfg program with partial success. I can issue the GET_POWER, GET_USER_INFO, etc commands but SET_HOST_POWER fails in a specific way. Using the cpqlocfg GET_EVENTLOG command I can see the events XML login and the power comand being issued from the iLO interface but then nothing happens. Some hints from googling suggest ACPI isn't configured properly but I can't find any hits on how to verify this. Am I even using the right command? There's also a few other options like PRESS_PWR_BUTTON etc. Problem is I have nowhere to test this, all I can do at the moment is give a script to ops and ask them to try it as 4am on a Sunday when they try the proc. The shutdown is trivial as I can use the windows "shutdown" command, it's the power on that I need help on. Anyone done this? I'd tag this "rib ribcl ilo" but lack the rep points, sorry.

  Read the article

• WDS updating raid drivers in an already existing image WIM

  - by Tim

  Here is my current setup. WDS installed on Server 2008 R2 for the new driverstore and multicast features. A Windows Server 2003 32bit Standard image built to support previous DL360 models. A new HP DL360 G6 which has a new raid controller in it. I need to add the driver for the raid controller into my Server 2003 32bit standard install image but I can't seem to figure out the correct method to do so. So far I've tried the following: Mounting the image and placing the drivers into the Sysprep drivers folder, adding the PCI device codes into the sysprep.inf file and committing the changes to the image. Pushing the image to a DL360 G4, ensuring the driver is in the correct locations and re-sysprepping the image. Hoping that the new driverstore feature would magically work with 2003 (a guy can dream cant he?) Is there some standard method that I can use to update this image with the new drivers or do I need to start from scratch with an entirely new build? Thanks in advance.

  Read the article

• Smart Array P400 battery failure

  - by RobIII

  The P400 Smart Array controller in my HP DL380G5 is indicating: Battery Status: Failed, Replace Battery 1 in the System Management Homepage. Also the IML indicates: POST Error: 1794-Drive Array - Array Accelerator Battery Charge Low I do have several replacement batteries (actually, several controllers including batteries) lying around at work but never had to actually replace one. I am wondering if the battery replacement (swap) could be done hot or if I need to take down my server to do the battery replacement. I have replaced other spare parts like fans and drives before and all those can be replaced hot. I just don't know about the battery of the P400 Smart Array controller. Any help would be appreciated. EDIT1 For those interested: straight from the horse's mouth: With thanks to Frands Hansen pointing it out here. EDIT2 In the end I did just power down, to be on the safe side and because the manual says so, and replace the battery. Couldn't be easier. Unplugged the old one of the end of the cable (not the end connected to the controller) and reconnected a spare one. The replaced battery is now in the server for about an hour and currently (still) recharging. I'm assuming all will end wel.

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

  - by Sergey

  I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

  Read the article

• Xp SP3 - Non-Functioning

  - by Josh

  Ok Here is a crazy problem, I have a HP dv6000 Laptop that can no longer hold a charge, so I hooked it up to my TV, bought a wireless mouse and keyboard and configured xp to run with the lid closed, It has medium to heavy usage mainly just streaming from sites like Netfilx, Hulu, ABC, etc. And playing movies I ripped of dvd. It ran fine for a while but recently it has been having some weird problems: Problem one: I used to use firefox but now when run it I can type but as soon as I click something it just shuts down, completely, I can't even close it unless I use taskmanager to do it. So I went and got google chrome which is better but still hit or miss, but never completely shuts down, I just can't click anything or type anything, or sometimes I just can't type anything or vice versa. Also when I open a new tab, and try to move back to my old one, it automatically closes the old tab when I click on it. Problem two: When using the internet I can't use any other application or anything windows (ie. Windows explorer) until I force quit all browsers with taskmanger. The reason I can't run anything is because I can't click on it. Problem three: When I try to play a movie (with vlc) Once it starts playing I can't click on anything, but I can use hotkeys, and once it stops everything is fine again. Well I hope somebody knows whats going on because I have no clue, If you need clarification or more info on something I would be happy to provide it...

  Read the article

• ksh Auto-Completion PuTTY Configuration

  - by Nitrodist

  I'm having a bit of a problem configuring my PuTTY client to work with the auto-completion feature in the ksh shell. I do a listing on the root with the directories /home and /homeroot and it returns the directories in a list just fine. I can't select it, though, by hitting X = (where X is the number). /home/nitrodist>ls /h #hits esc + = 1) home/ 2) homeroot/ #hits 2 + = for the 'homeroot' dir 1) home/ 2) homeroot/ #hits just the '=' key. 1) home/ 2) homeroot/ Any ideas? I've su -'d to another user who can actually do it with their PuTTY session and I can't do it there, which makes me think it's a PuTTY configuration issue. This is running on a ksh93 shell on HP-UX, if that makes any difference. Here's my ksh config: /home/campbelm>set -o Current option settings allexport off bgnice on emacs off errexit off gmacs off ignoreeof off interactive on keyword off markdirs off monitor on noexec off noclobber off noglob off nolog off notify off nounset off privileged off restricted off trackall off verbose off vi on viraw on xtrace off /home/campbelm>

  Read the article

• Compaq Motherboard gives "CPU Fan Error"

  - by John

  I have a motherboard for a HP business desktop dx5150 PC. The model written on the board is "MS-7050" and it is for an AMD socket 939 processor. I got everything installed in it, and when I turned it on, it showed a message stating that there was a "CPU Fan Error" (or some similar language) and then turned off. It never stays on for more than about 30 seconds, probably less. The fan had previously been working great, but I replaced it anyway with a brand new Cooler Master fan. This did not work. I then reset the BIOS with the jumpers on the board, no dice. I replaced the CMOS battery. Same error. I then replaced the entire computer power supply with a brand new Antec, same error. The fan header is keyed, and has room for 3 pins. The CPU fan is designed the same way, so its not that I'm missing a temperature sensor or anything. Can anyone give some suggestions? Especially maybe some secret keystrokes to bypass this error?

  Read the article

• Windows 7 Busy Icon won't stop spinning

  - by Lynda

  In windows 7 you have the busy icon that is a little blue wheel spinning beside the cursor when it is doing something. It has started to spin for about a second every 3-5 seconds. There is noting running that I can tell on the computer to cause the busy icon. It gets very annoying and I am not sure what to do to get it to stop. Ideas? Running a CPU Usage Gadget says I have less than 5% of the CPU being use and I have over 6GB of RAM free. (I have 8GB total) I am running a 3.6 GHZ AMD FX 4100 processor. EDIT- What I am actually seeing is the working in background pointer (the pointer is still visible beside the busy icon). EDIT 2 - After realizing this happened with the printer installation I turned on the the printer and the busy icon stopped. The printer is setup wirelessly. How do I stop Windows from (I guess) checking for the printer? That is what I assume it is doing. I am using a HP Officejet 8600

  Read the article

• Reusing Raid 5 Drive?

  - by User125

  We have two servers (ML530 G2 and DL380G2) w/ identical HP 10K RPM SCSI drives w/ a raid 5. One is decommissioned and the other will be decommissioned shortly. However, one of the drives on the production server had a drive failure. My hope was to take one of the drives from the decommissioned server and pop it into the production server. Both are running RAID 5. I broke the array on the decomm. server. To my knowledge, that should have wiped out all the volume and partition information. However, I do not know if it is safe to then take a drive from the decomm'ed server and replace the failed drive. Will the existing array see it as a replacement drive, wipe it and rebuild? Or will it fail because it was used in an array before. Are there any remnant data that resides on the drives after deleting a raid 5 array? These servers are 10-15 years old, so we're just trying to keep them alive until we decommission it. I'm not looking to pay a premium to find a vendor that still sells replacement drives for this system.

  Read the article

• Print job leaves queue but document isn't printed

  - by midnightstar

  I'm dealing with an HP Deskjet F380 All-in-One printer. It's connected via USB to a desktop running Windows 7 Enterprise x64. If I attempt to print something like a web page or a word document, the print job will show up in the print queue and the printer would stir. By stir, I mean, it would seem to prepare itself to print. However, the print job would then leave queue (I'm thinking the computer sees it as completed) and the printer would never actually print anything. However I went into Printers and Devices under the Windows start menu, into printer properties, and print a test page, the test page would print out successfully. I attempted to uninstall and re-install the printer drivers for the printer, but the printer would continue the same behavior afterwards. I also connected the printer to another computer and the printer will print just about anything. I also checked to make sure that the computer the printer needs to be connected to was update to date as far as the OS. The machine is fully up to date. I played with the way the computer handles printer spooling. Under the printer properties, under the "Advanced" tab, I had the print job print directly to the printer. In all these instances, the same behavior continues. I've restarted the printer spooling service. I've also gone under C:\Windows\System32\spool\PRINTERS and deleted files that were sitting in the folder. I have ran SFC /scannnow and the system found no errors in the system's integrity. I had the computer and printer make a cold reboot individually. The only lead I really have going for me is that since the printer prints on other PCs, I can only assume that there is something wrong with the way the PC is configured.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >