Search Results

Search found 1096 results on 44 pages for 'never quit'.

Page 31/44 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• why Thinkpad T410s intermittent keyboard death?

  - by patrickmdnet

  I have a Thinkpad T410s running Windows 7 64-bit. I have had it for three months. It has the latest BIOS (1.41) and trackpad drivers. In the last week I have started to notice that the keyboard intermittently stops working. Specifically, keystrokes have no effect, including Fn-F12 (shutdown) and Ctrl-Alt-Del. The LED on the capslock key does not turn on or off. Whatever state the lighted keys (e.g. mute) were in remains. The trackpad and trackpoint work properly, and I can close apps and properly shut down the machine. When I attach a USB keyboard it is recognized, but no keys work. If I run the Lenovo keyboard test, all the keys register properly and the caps lock light works again. When I quit the test app, the caps lock light stops working. If I hit Fn-F12 while the keyboard test is running, it goes into hibernation. When the machine comes back from hibernation, once I exit the keyboard test I again cannot do any input on the keyboard. I'm pretty convinced there is a software or driver problem. I never saw this the first three months I had the laptop. I do not recall installing anything recently. I am sure I've received some Windows security updates. I tried using wired networking instead of wireless - no difference. There doesn't appear to be any inciting event; it usually happens when I am working over ssh. I switched from rxvt+ssh to Putty and the problem still occurs. Any ideas?

  Read the article

• How can I keep SSH's know_hosts up to date (semi-securely)?

  - by Chas. Owens

  Just to get this out in front so I am not told not to do this: The machines in question are all on a local network with little to no internet access (they aren't even well connected to the corporate network) Everyone who has the ability to setup a man-in-the-middle attack already has root on the machine The machines are reinstalled as part of QA procedures, so having new host keys is important (we need to see how the other machines react); I am only trying to make my machine nicer to use. I do a lot of reinstalls on machines which changes their host keys. This necessitates going into ~/.ssh/known_hosts on my machine and blowing away to old key and adding the new key. This is a massive pain in the tuckus, so I have started considering ways to automate this. I don't want to just blindly accept any host key, so patching OpenSSH to ignore host keys is out. I have considered creating a wrapper around the ssh command the will detect the error coming back from ssh and present me with a prompt to delete the old key or quit. I have also considered creating a daemon that would fetch the latest host key from a machine on a whitelist (there are about twenty machines that are being constantly reinstalled) and replace the old host key in known_hosts. How would you automate this process?

  Read the article

• SMTP Client implementation [on hold]

  - by orif

  I'm implementing SMTP client. What should the client do once it already sent the "." at the end of the mail, but didn't receive "250 Ok"? This is how the conversation between the client and server look like: Server Response: 220 www.sample.com ESMTP Postfix Client Sending : HELO domain.com Server Response: 250 Hello domain.com Client Sending : MAIL FROM: <[email protected]> Server Response: 250 Ok Client Sending : RCPT TO: <[email protected]> Server Response: 250 Ok Client Sending : DATA Server Response: 354 End data with <CR><LF>.<CR><LF> Client Sending : Subject: Example Message Client Sending : From: [email protected] Client Sending : To: [email protected] Client Sending : Client Sending : TEST MAIL Client Sending : Client Sending : . Server Response: 250 Ok: queued as 23411 Client Sending : QUIT I'm not sure what should I do if the client sends "." and doesn't receive the 250 Ok - because of possible network error. Was the "." sent or not? Should the client resend the mail - and - maybe - duplicate the item, or not - and risk in losing an important mail item? Thank you.

  Read the article

• Exchange - inbound email only works from some servers

  - by Kryptonite

  I am having a problem where inbound mail from outside only works when sent from certain hosts. For example, when I send myself an email from my personal gmail account all is well, as the logs show: 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 EHLO 250 - - 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 STARTTLS 220 - - 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 STARTTLS 220 - - 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 EHLO 250 - - 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 MAIL 250 - - 2012-09-05 18:14:16 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 RCPT 250 - - 2012-09-05 18:14:48 209.85.223.175 mail-ie0-f175.google.com SMTPSVC1 MAILSVR 192.168.1.79 0 QUIT 240 - - However, if I sent from my personal Yahoo account, I get this response: Sorry, we were unable to deliver your message to the following address. <[email protected]>: Remote host said: 530 5.7.0 Must issue a STARTTLS command first [MAIL_FROM] (NB: Nothing appeared in the smtp log for this message.) Any suggestions where to start looking? EDIT ---- I don't know if it matters, but the certificate I am using for TLS is self signed.

  Read the article

• Sending mails via Mutt and Gmail: Duplicates

  - by Chris

  I'm trying to setup mutt wiht gmail for the first time. It seems to work pretty well, however when I send a mail from Mutt i appears twice in Gmail's sent folder. (I assume it's also sent twice - I'm trying to validate that) My configuration (Stripped of coloring): # A basic .muttrc for use with Gmail # Change the following six lines to match your Gmail account details set imap_user = "XX" set smtp_url = "[email protected]@smtp.gmail.com:587/" set from = "XX" set realname = "XX" # Change the following line to a different editor you prefer. set editor = "vim" # Basic config, you can leave this as is set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set imap_check_subscribed set hostname = gmail.com set mail_check = 120 set timeout = 300 set imap_keepalive = 300 set postponed = "+[Gmail]/Drafts" set record = "+[Gmail]/Sent Mail" set header_cache=~/.mutt/cache/headers set message_cachedir=~/.mutt/cache/bodies set certificate_file=~/.mutt/certificates set move = no set include set sort = 'threads' set sort_aux = 'reverse-last-date-received' set auto_tag = yes hdr_order Date From To Cc auto_view text/html bind editor <Tab> complete-query bind editor ^T complete bind editor <space> noop # Gmail-style keyboard shortcuts macro index,pager y "<enter-command>unset trash\n <delete-message>" "Gmail archive message" macro index,pager d "<enter-command>set trash=\"imaps://imap.googlemail.com/[Gmail]/Bin\"\n <delete-message>" "Gmail delete message" macro index,pager gl "<change-folder>" macro index,pager gi "<change-folder>=INBOX<enter>" "Go to inbox" macro index,pager ga "<change-folder>=[Gmail]/All Mail<enter>" "Go to all mail" macro index,pager gs "<change-folder>=[Gmail]/Starred<enter>" "Go to starred messages" macro index,pager gd "<change-folder>=[Gmail]/Drafts<enter>" "Go to drafts" macro index,pager gt "<change-folder>=[Gmail]/Sent Mail<enter>" "Go to sent mail" #Don't prompt on exit set quit=yes ## ================= #Color definitions ## ================= set pgp_autosign

  Read the article

• How to make quicksilver remember custom trigger

  - by corroded

  I am trying to make a custom trigger for my shell/apple script file to run so I can just launch my dev environment at the push of a button. So basically: I have a shell script(and some apple script included) in ~ named start_server.sh which does 3 things: start up solr server start up memcached start up script/server I have a saved quicksilver command(.qs) that opens up start_server.sh(so start_server.sh, then the action is "Run in Terminal") I created a custom trigger that calls this saved qs command. I did that then tested it and it works. I then tried to double check it so I quit quicksilver and when I checked the triggers it just said: "Open (null)" as the action. I set the trigger again and when i restarted QS the same thing happened again. I don't know why but my old custom trigger to open terminal has worked since forever so why doesn't this one work? Here's a screenie of the triggers after I restart QS: http://grab.by/4XWW If you have any other suggestion on how to make a "push button" start for my server then please do so :) Thanks! As an added note, I have already tried the steps on this thread but to no avail: http://groups.google.com/group/blacktree-quicksilver/browse_thread/thread/7b65ecf6625f8989

  Read the article

• Exchange emails not delivering for one user

  - by Cylindric

  We have an Exchange infrastructure going through a migration from 2003 SP2 (call it ExOld) to 2010 (ExNew). All users are now on the new server, but mail is still being directed to ExOld until testing is complete. ExNew sends emails directly to the internet. For one particular user, emails don't seem to be being reliably delivered, but the odd thing is that it's not all emails. I can see external emails in his inbox. If I send an internal email it works fine. If I send an email from Gmail to him it doesn't get through. If I telnet from outside to ExOld I can send an email to him. If I telnet from outside to ExNew I can send an email to him. This is a transcript that results in a successful send: 220 ExOldName Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Mon, 22 Oct 2012 10:55:26 +0100 EHLO test.com 500 5.3.3 Unrecognized command EHLO test.com 250-ExOldFQDN Hello [MyTestExternalIp] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] notify=success,failure 250 2.1.5 [email protected] DATA 354 Start mail input; end with . Subject:Test 1056 Test 10:56 . 250 2.6.0 Queued mail for delivery quit 221 2.0.0 ExOldFQDN Service closing transmission channel Emails go through Symantec Cloud, but their "Track and Trace" shows the messages going through, with a "delivered ok" log entry. 2012-10-22 09:19:56 Connection from: 209.85.212.171 (mail-wi0-f171.google.com) 2012-10-22 09:19:56 Sending server HELO string:mail-wi0-f171.google.com 2012-10-22 09:19:56 Message id:CAE5-_4hzGpY2kXFbzxu7gzEUSj5BAvi+BB5q1Gjb6UUOXOWT3g@mail.gmail.com 2012-10-22 09:19:56 Message reference: 135089759500000177171130001194006 2012-10-22 09:19:56 Sender: [email protected] 2012-10-22 09:19:56 Recipient: [email protected] 2012-10-22 09:20:26 SMTP Status: OK 2012-10-22 09:19:56 Delivery attempt #1 (final) 2012-10-22 09:19:56 Recipient server: ExOldIP (ExOldIP) 2012-10-22 09:19:56 Response: 250 2.6.0 Queued mail for delivery I'm not sure where to look on the old (or new) server for information as to where the mails are ending up.

  Read the article

• Ubuntu Launcher Items Don't Have Correct Environment Vars under NX

  - by ivarley

  I've got an environment variable issue I'm having trouble resolving. I'm running Ubuntu (Karmic, 9.10) and coming in via NX (NoMachine) on a Mac. I've added several environment variables in my .bashrc file, e.g.: export JAVA_HOME=$HOME/dev/tools/Linux/jdk/jdk1.6.0_16/ Sitting at the machine, this environment variable is available on the command line, as well as for apps I launch from the Main Menu. Coming in over NX, however, the environment variable shows up correctly on the command line, but NOT when I launch things via the launcher. As an example, I created a simple shell script called testpath in my home folder: #!/bin/sh echo $PATH && sleep 5 quit I gave it execute privileges: chmod +x testpath And then I created a launcher item in my Main Menu that simply runs: ./testpath When I'm sitting at the computer, this launcher runs and shows all the stuff I put into the $PATH variable in my .bashrc file (e.g. $JAVA_HOME, etc). But when I come in over NX, it shows a totally different value for the $PATH variable, despite the fact that if I launch a terminal window (still in NX), and type export $PATH, it shows up correctly. I assume this has to do with which files are getting loaded by the windowing system over NX, and that it's some other file. But I have no idea how to fix it. For the record, I also have a .profile file with the following in it: # if running bash if [ -n "$BASH_VERSION" ]; then # include .bashrc if it exists if [ -f "$HOME/.bashrc" ]; then . "$HOME/.bashrc" fi fi

  Read the article

• Apache using 100% CPU, once again

  - by CBenni

  Recently, apache2 started using 100% of CPU power: top gives me From other, similar threads, I took the tip to use mod_status. Aside from HUGE amounts of NULL requests, it gives: CPU Usage: u2.16 s1.32 cu0 cs0 - .0835% CPU load 1.2 requests/sec - 17.6 kB/second - 14.6 kB/request 8 requests currently being processed, 42 idle workers The access and error logs do not show anything surprising or intriguing at all. Note the .8% CPU usage. Another tip was to use strace: root@server:~# strace -p 1956 Process 1956 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...> And remains like this for at least half an hour, without producing any additional output. Restarting apache fixed the problem for less than a second The server runs a few custom python scripts aswell as a django-powered website on apache2 (up-to-date), but even turning the scripts off (or not having them active in the first place) did not change anything. After I stopped apache and powered my server off, powered it on a few minutes afterwards and restarted all my services, the CPU usage remained low for several hours, just in order to pop up again randomly (?) The DigitalOcean CPU stats on my server are: You can see how the CPU usage was super high for almost half a day until I restarted the bot - just to remain stable for several hours and then pop up again. I am completely at a loss of words and don't know what I could do to find out what piece of my code is giving me these problems or if apache itself is the cause... Therefore I would greatly appreciate any hints to the questions: What else can I try to do? Which things might I not have checked? Is this definitely in my own code? How do you find what part of python code crashes an app via a infinite loop or similar?

  Read the article

• Shortcut To Full Screen App In Lion

  - by omghai2u

  I postponed getting OSX Lion for as long as I possibly could. Now that I have it, I'm having lots of difficulties getting it to perform how I want. On Snow Leopard my typical setup for working was 4 spaces. I'd keep a Windows VM open on Space #4 full-screened, a Linux open on space #3, and I'd do other stuff on spaces #1 and #2. My keyboard shortcut allowed me to switch between my Windows work (Command + 4) to my Linux work (Command + 3) very quickly, and without the need for my hands to leave the keyboard (or effectively to even quit typing). Productivity was good. I see that on Lion a full-screened VM (and yes, they need to be full screened, Fusion's Unity won't cut it for what I need to do) is its own separate Desktop. I have set up 4 desktops and made my keyboard shortcuts to move between them Command + # just as before. But how do I get my full-screened VM to be one of those already existing desktops? Or, rather, how do I make a short-cut for the full-screened app?

  Read the article

• Scripting around the lack of user:password@domain url functionality in jscript/IE

  - by Idiomatic

  I currently have a jscript that runs a php script on a server for me, dead simple. But... I want to be atleast somewhat secure so I setup a login. Now if I use the regular user:password@domain system it won't work (IE decided it was a security issue). And if I let IE just remember the password then it pops up a security message confirming my login every time (which kills the point of the button). So I need a way to make the security message go away. I could lower security settings, which tbh I am fine with but nothing seems to make it fuck off (there might be some registry setting to change). Find a fix for jscript that will let me use a password in the url. There used to be a regedit that worked for older systems which allowed IE to use url passwords (not working on my 64bit windows7 setup) though I doubt that'd have helped jscript anyways (since it outright crashes). Use an app other than IE. Inwhich case I'm not sure how to go about it, I want it to be responsive and invisible so IE was a good choice. It is near instant. Use XMLHttpRequest instead of IE directly? May even be faster but I've no idea if it'd help or just have the same error. Use a completely different approach. Maybe some app that can script website browsing. var args = {}; var objIEA = new ActiveXObject("InternetExplorer.Application"); if( WScript.Arguments.Item(0) == "pause" ){ objIEA.navigate("http://domain/index.html?pause"); } if( WScript.Arguments.Item(0) == "next" ){ objIEA.navigate("http://domain/index.html?next"); } objIEA.visible = false; while(objIEA.readyState != 4) {} objIEA.quit();

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• How to protect folder privacy against unethical network administrators? [closed]

  - by Trevor Trovalds

  I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

  Read the article

• Install Peppermint OS three on Asus EeePC

  - by Kithoth

  I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

  Read the article

• Exchange 2007 issue internet receive connector

  - by user223779

  I have issue with yahoo.co.uk if I send a mail from within the yahoo webconsole the mail arrives in my inbox on the exchange server If I send mail from Iphone configure to send via mail box configure with yahoo setting mail is dropped. It is not the phone I can send perfectly fine to other exchange 2007 servers same service pack etc. if you look at the smtprec log below. this message sent from the phone you can see stops after 354 Start mail input; end with . ,<,EHLO nm26-vm7.bullet.mail.ir2.yahoo.com, ,,250-mail.marcocm.com Hello [212.82.97.49], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA060;2014-06-04T11:26:50.898Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., ,+,, This is the message hitting the same server sent from yahoo webmail. ,"220 mail.marcocm.com Microsoft ESMTP MAIL Service ready at Wed, 4 Jun 2014 12:29:26 +0100", ,<,EHLO nm4-vm6.bullet.mail.ir2.yahoo.com, ,,250-mail.xxx.com Hello [212.82.96.104], ,,250-SIZE 10485760, ,,250-PIPELINING, ,,250-DSN, ,,250-ENHANCEDSTATUSCODES, ,,250-AUTH, ,,250-8BITMIME, ,,250-BINARYMIME, ,,250 CHUNKING, ,<,MAIL FROM:, ,*,08D13F3CADECA06B;2014-06-04T11:29:26.237Z;1,receiving message ,,250 2.1.0 Sender OK, ,<,RCPT TO:, ,,250 2.1.5 Recipient OK, ,<,DATA, ,,354 Start mail input; end with ., 2,,250 2.6.0 <[email protected] Queued mail for delivery, <,QUIT, ,,221 2.0.0 Service closing transmission channel, ,-,,Local ,+,, Any Thoughts how to fix this issue much appreciated.

  Read the article

• Cancelling Window 7 shutdown diables power button

  - by Jens

  Normally, pressing the power button once initiates a shut-down in Windows 7. If any programs are still running that will not quit (e.g. waiting for a dialogue response), Windows overlays the screen with a dialogue allowing the user to cancel the shut-down. I've just noticed that on two different systems here, using this cancel option disables the shut-down via power button. The power button can still be used to kill the system by holding it for a few seconds, using the Start menu button to shut the PC down still works as well. Steps to reproduce: Open Notepad, type a few characters. Do not save. Press the computer's power button. Wait until the dark screen appears. Press cancel. Press the power button again. Notice how nothing happens. What is the reason for this behaviour, and can it be disabled to always try and shut down the PC when the power button is pressed?

  Read the article

• Using Monit to monitor Resque

  - by Alex

  I'm trying to use resque as a job runner for Rails. I've tried this config, and many other ways of demonizing the rescue task (because running rake resque:work leaves the terminal tied to that command). Unfortunately, their example configuration doesn't work for me. Does the configuration look correct? Or is there another way to turn the process into a daemon? Thank you :) check process resque_worker_QUEUE with pidfile /data/APP_NAME/current/tmp/pids/resque_worker_QUEUE.pid start program = "/bin/sh -c 'cd /data/APP_NAME/current; RAILS_ENV=production QUEUE=queue_name VERBOSE=1 nohup rake environment resque:work& > log/resque_worker_QUEUE.log && echo $! > tmp/pids/resque_worker_QUEUE.pid'" as uid deploy and gid deploy stop program = "/bin/sh -c 'cd /data/APP_NAME/current && kill -s QUIT `cat tmp/pids/resque_worker_QUEUE.pid` && rm -f tmp/pids/resque_worker_QUEUE.pid; exit 0;'" if totalmem is greater than 300 MB for 10 cycles then restart # eating up memory?

  Read the article

• Hp Pavilion dv6000 wont boot right and freezes

  - by MalwareManiac

  I have an hp pavilion dv6000 that was having windows issues recently including randomly freezing. I eventually concluded that the hard drive was bad (And I was correct as the bad drive started making funny noises and quit working soon after). So I replaced it with a known good drive and put windows on it and it worked for a few hours. After a few restarts startup didn't even make it to the login screen. It just stays at a lighted black screen until I restarted. After another restart it made it to windows but then froze after a few minutes. A few more restarts yielded one of these two results. Like I mentioned earlier I have a know good drive in it and I also replaced the memory that was in it with a know good stick along with running memtest with no errors. So What does that leave? a corrupted windows installation? Motherboard? CPU? Any ideas?

  Read the article

• Banshee encountered a Fatal Error (sqlite error 11: database disk image is malformed)

  - by Nik

  I am running ubuntu 10.10 Maverick Meerkat, and recently I am helping in testing out indicator-weather using the unstable buids. However there was a bug which caused my system to freeze suddenly (due to indicator-weather not ubuntu) and the only way to recover is to do a hard reset of the system. This happened a couple of times. And when i tried to open banshee after a couple of such resets I get the following fatal error which forces me to quit banshee. The screenshot is not clear enough to read the error, so I am posting it below, An unhandled exception was thrown: Sqlite error 11: database disk image is malformed (SQL: BEGIN TRANSACTION; DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM CoreSmartPlaylists WHERE IsTemporary = 1); DELETE FROM CoreSmartPlaylists WHERE IsTemporary = 1; COMMIT TRANSACTION) at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0 Exception has been thrown by the target of an invocation. at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.MonoCMethod.Invoke (BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.ConstructorInfo.Invoke (System.Object[] parameters) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type, Boolean nonPublic) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type) [0x00000] in <filename unknown>:0 at Banshee.Gui.GtkBaseClient.Startup () [0x00000] in <filename unknown>:0 at Hyena.Gui.CleanRoomStartup.Startup (Hyena.Gui.StartupInvocationHandler startup) [0x00000] in <filename unknown>:0 .NET Version: 2.0.50727.1433 OS Version: Unix 2.6.35.27 Assembly Version Information: gkeyfile-sharp (1.0.0.0) Banshee.AudioCd (1.9.0.0) Banshee.MiniMode (1.9.0.0) Banshee.CoverArt (1.9.0.0) indicate-sharp (0.4.1.0) notify-sharp (0.4.0.0) Banshee.SoundMenu (1.9.0.0) Banshee.Mpris (1.9.0.0) Migo (1.9.0.0) Banshee.Podcasting (1.9.0.0) Banshee.Dap (1.9.0.0) Banshee.LibraryWatcher (1.9.0.0) Banshee.MultimediaKeys (1.9.0.0) Banshee.Bpm (1.9.0.0) Banshee.YouTube (1.9.0.0) Banshee.WebBrowser (1.9.0.0) Banshee.Wikipedia (1.9.0.0) pango-sharp (2.12.0.0) Banshee.Fixup (1.9.0.0) Banshee.Widgets (1.9.0.0) gio-sharp (2.14.0.0) gudev-sharp (1.0.0.0) Banshee.Gio (1.9.0.0) Banshee.GStreamer (1.9.0.0) System.Configuration (2.0.0.0) NDesk.DBus.GLib (1.0.0.0) gconf-sharp (2.24.0.0) Banshee.Gnome (1.9.0.0) Banshee.NowPlaying (1.9.0.0) Mono.Cairo (2.0.0.0) System.Xml (2.0.0.0) Banshee.Core (1.9.0.0) Hyena.Data.Sqlite (1.9.0.0) System.Core (3.5.0.0) gdk-sharp (2.12.0.0) Mono.Addins (0.4.0.0) atk-sharp (2.12.0.0) Hyena.Gui (1.9.0.0) gtk-sharp (2.12.0.0) Banshee.ThickClient (1.9.0.0) Nereid (1.9.0.0) NDesk.DBus.Proxies (0.0.0.0) Mono.Posix (2.0.0.0) NDesk.DBus (1.0.0.0) glib-sharp (2.12.0.0) Hyena (1.9.0.0) System (2.0.0.0) Banshee.Services (1.9.0.0) Banshee (1.9.0.0) mscorlib (2.0.0.0) Platform Information: Linux 2.6.35-27-generic i686 unknown GNU/Linux Disribution Information: [/etc/lsb-release] DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.10 DISTRIB_CODENAME=maverick DISTRIB_DESCRIPTION="Ubuntu 10.10" [/etc/debian_version] squeeze/sid Just to make it clear, this happened only after the hard resets and not before. I used to use banshee everyday and it worked perfectly. Can anyone help me fix this?

  Read the article

• Exception Handling Frequency/Log Detail

  - by Cyborgx37

  I am working on a fairly complex .NET application that interacts with another application. Many single-line statements are possible culprits for throwing an Exception and there is often nothing I can do to check the state before executing them to prevent these Exceptions. The question is, based on best practices and seasoned experience, how frequently should I lace my code with try/catch blocks? I've listed three examples below, but I'm open to any advice. I'm really hoping to get some pros/cons of various approaches. I can certainly come up with some of my own (greater log granularity for the O-C approach, better performance for the Monolithic approach), so I'm looking for experience over opinion. EDIT: I should add that this application is a batch program. The only "recovery" necessary in most cases is to log the error, clean up gracefully, and quit. So this could be seen to be as much a question of log granularity as exception handling. In my mind's eye I can imagine good reasons for both, so I'm looking for some general advice to help me find an appropriate balance. Monolitich Approach class Program{ public static void Main(){ try{ Step1(); Step2(); Step3(); } catch (Exception e) { Log(e); } finally { CleanUp(); } } public static void Step1(){ ExternalApp.Dangerous1(); ExternalApp.Dangerous2(); } public static void Step2(){ ExternalApp.Dangerous3(); ExternalApp.Dangerous4(); } public static void Step3(){ ExternalApp.Dangerous5(); ExternalApp.Dangerous6(); } } Delegated Approach class Program{ public static void Main(){ try{ Step1(); Step2(); Step3(); } finally { CleanUp(); } } public static void Step1(){ try{ ExternalApp.Dangerous1(); ExternalApp.Dangerous2(); } catch (Exception e) { Log(e); throw; } } public static void Step2(){ try{ ExternalApp.Dangerous3(); ExternalApp.Dangerous4(); } catch (Exception e) { Log(e); throw; } } public static void Step3(){ try{ ExternalApp.Dangerous5(); ExternalApp.Dangerous6(); } catch (Exception e) { Log(e); throw; } } } Obsessive-Compulsive Approach class Program{ public static void Main(){ try{ Step1(); Step2(); Step3(); } finally { CleanUp(); } } public static void Step1(){ try{ ExternalApp.Dangerous1(); } catch (Exception e) { Log(e); throw; } try{ ExternalApp.Dangerous2(); } catch (Exception e) { Log(e); throw; } } public static void Step2(){ try{ ExternalApp.Dangerous3(); } catch (Exception e) { Log(e); throw; } try{ ExternalApp.Dangerous4(); } catch (Exception e) { Log(e); throw; } } public static void Step3(){ try{ ExternalApp.Dangerous5(); } catch (Exception e) { Log(e); throw; } try{ ExternalApp.Dangerous6(); } catch (Exception e) { Log(e); throw; } } } Other approaches welcomed and encouraged. Above are examples only.

  Read the article

• Get to Know a Candidate (16 of 25): Stewart Alexander&ndash;Socialist Party USA

  - by Brian Lanham

  DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Alexander is an American democratic socialist politician and a resident of California. Alexander was the Peace and Freedom Party candidate for Lieutenant Governor in 2006. He received 43,319 votes, 0.5% of the total. In August 2010, Alexander declared his candidacy for the President of the United States with the Socialist Party and Green Party. In January 2011, Alexander also declared his candidacy for the presidential nomination of the Peace and Freedom Party. Stewart Alexis Alexander was born to Stewart Alexander, a brick mason and minister, and Ann E. McClenney, a nurse and housewife.  While in the Air Force Reserve, Alexander worked as a full-time retail clerk at Safeway Stores and then began attending college at California State University, Dominguez Hills. Stewart began working overtime as a stocking clerk with Safeway to support himself through school. During this period he married to Freda Alexander, his first wife. They had one son. He was honorably discharged in October 1976 and married for the second time. He left Safeway in 1978 and for a brief period worked as a licensed general contractor. In 1980, he went to work for Lockheed Aircraft but quit the following year.  Returning to Los Angeles, he became involved in several civic organizations, including most notably the NAACP (he became the Labor and Industry Chairman for the Inglewood South Bay Branch of the NAACP). In 1986 he moved back to Los Angeles and hosted a weekly talk show on KTYM Radio until 1989. The show dealt with social issues affecting Los Angeles such as gangs, drugs, and redevelopment, interviewing government officials from all levels of government and community leaders throughout California. He also worked with Delores Daniels of the NAACP on the radio and in the street. The Socialist Party USA (SPUSA) is a multi-tendency democratic-socialist party in the United States. The party states that it is the rightful continuation and successor to the tradition of the Socialist Party of America, which had lasted from 1901 to 1972. The party is officially committed to left-wing democratic socialism. The Socialist Party USA, along with its predecessors, has received varying degrees of support, when its candidates have competed against those from the Republican and Democratic parties. Some attribute this to the party having to compete with the financial dominance of the two major parties, as well as the limitations of the United States' legislatively and judicially entrenched two-party system. The Party supports third-party candidates, particularly socialists, and opposes the candidates of the two major parties. Opposing both capitalism and "authoritarian Communism", the Party advocates bringing big business under public ownership and democratic workers' self-management. The party opposes unaccountable bureaucratic control of Soviet communism. Alexander has Ballot Access in: CO, FL, NY, OH (write-in access in: IN, TX) Learn more about Stewart Alexander and Socialist Party USA on Wikipedia.

  Read the article

• Chrome Web Browser Messages: Some Observations

  - by ultan o'broin

  I'm always on the lookout for how different apps handle errors and what kind of messages are shown (I probably need to get out more), I use this 'research' to reflect on our own application error messages patterns and guidelines and how we might make things better for our users in future. Users are influenced by all sorts of things, but their everyday experiences of technology, and especially what they encounter on the internet, increasingly sets their expectations for the enterprise user experience too. I recently came across a couple of examples from Google's Chrome web browser that got me thinking. In the first case, we have a Chrome error about not being able to find a web page. I like how simple, straightforward messaging language is used along with an optional ability to explore things a bit further--for those users who want to. The 'more information' option shows the error encountered by the browser (or 'original' error) in technical terms, along with an error number. Contrasting the two messages about essentially the same problem reveals what's useful to users and what's not. Everyone can use the first message, but the technical version of the message has to be explicitly disclosed for any more advanced user to pursue further. More technical users might search for a resolution, using that Error 324 number, but I imagine most users who see the message will try again later or check their URL again. Seems reasonable that such an approach be adopted in the enterprise space too, right? Maybe. Generally, end users don't go searching for solutions based on those error numbers, and help desk folks generally prefer they don't do so. That's because of the more critical nature of enterprise data or the fact that end users may not have the necessary privileges to make any fixes anyway. What might be more useful here is a link to a trusted source of additional help provided by the help desk or reputable community instead. This takes me on to the second case, this time more closely related to the language used in messaging situations. Here, I first noticed by the using of the (s) approach to convey possibilities of there being one or more pages at the heart of the problem. This approach is a no-no in Oracle style terms (the plural would be used) and it can create translation issues (though it is not a show-stopper). I think Google could have gone with the plural too. However, of more interest is the use of the verb "kill", shown in the message text and as an action button label. For many writers, words like "kill" and "abort" are to be avoided as they can give offense. I am not so sure about that judgment, as really their use cannot be separated from the context. Certainly, for more technical users, they're fine and have been in use for years, so I see no reason to avoid these terms if the audience has accepted them. Most end users too, I think would find the idea of "kill" usable and may even use the term in every day speech. Others might disagree--Apple uses a concept of Force Quit, for example. Ultimately, the only way to really know how to proceed is to research these matter by asking users of differing roles and expertise to perform some tasks, encounter these messages and then make recommendations based on those findings for our designs. Something to do in 2011!

  Read the article

• Customer Spotlight - CSX: Charles Pack

  - by cwarticki

  A couple of weeks ago, I had the distinct privilege of facilitating a training session with CSX.  CSX is a wonderful customer.  They've been a dedicated Oracle customer for many years. They have quite an extensive Oracle footprint including Server Technologies, Fusion Middleware and E-Business Suite products.  They also utilize Oracle's Solution Support Center offering from Advanced Customer Services, for their Database products. I'm always on the lookout for Oracle gems and I discovered one at CSX. Before my session began, I met with Charles Pack.  In my view, he's an Oracle guru.  Don't take my word for it, just read any of the books he's authored or co-authored and the one soon to be released.  Just looking at his bookshelf, I saw titles going back to Oracle 7 & 8, as well as a Solaris 2.x book.  Remember those?   Anyway, Charles is a technologist and a manager (and wears numerous other hats too).  I had a wonderful time talking with Charles and getting to know him.  What do you consider keys to your personal success?  Inability to quit.  When I decide that I will accomplish something, I will, regardless of the nature of the challenge.  Never quitting means a perpetual drive for change and progress and setting examples for others to follow.  The reason I write OCP books is because I can provide a path for people to improve their knowledge of the product, gain a certification, and reach their professional goals. What do you consider the most important part of your job?  Negotiations.  We all have competing goals, incentives and finite resources, but we should all have the same common goal – progress.  So finding the way for all parties to progress is the most important thing we do. What is the most important part of your relationship with Oracle?  Oracle provides solutions – not just products - that are critical to our business success.  So continuous communication regarding education, services, product roadmaps and shared goals is the most important part of our ongoing relationship. Charles is an Oracle loyalist.  His career has been based on using our products and he's passionate about the products he works with.  You can tell, just by talking with him.  I appreciate Charles and other customers like him.  He's an expert in his field and an Oracle evangelist.  He is an asset to CSX and to their success.  He's an advocate for Oracle and an asset to our customers.  You can also friend and follow Charles on Twitter @charlesapack It was a pleasure meeting you Charles! -Chris Warticki Global Customer Management

  Read the article

• Inspiring a co-worker to adopt better coding practices?

  - by Aaronaught

  In the Handling my antiquated coworker question, various people discussed strategies for dealing with coworkers who are unwilling to integrate their workflow with the team's. I'd like, if possible, to learn some strategies for "teaching" a coworker who is merely ignorant of modern techniques and tools, and possibly a little apathetic. I've started working with a programmer who until recently has been working in relative isolation, in a different part of the company. He has extensive domain knowledge and most importantly he has demonstrated good problem-solving skills, something which many candidates seem to lack. However, the actual (C#) code I've seen is a throwback to the VB6 days. Procedural structure, Hungarian notation, global variables (abuse of static), no interfaces, no tests, non-use of Generics, throwing System.Exception... you get the idea. This programmer is a fair bit older than I am and, by first impressions at least, doesn't actively seek positive change. I'm not going to say resistant to change, because I think that is largely an issue of how the topic gets broached, and I want to be prepared. Programmers tend to be stubborn people, and going in with guns blazing and instituting rip-it-to-shreds code reviews and strictly-enforced policies is very likely not going to produce the end result that I want. If this were a new hire, a junior programmer, I wouldn't think twice about taking a "mentor" stance, but I'm extremely wary of treating an experienced employee as a clueless newbie (which he's not - he just hasn't kept pace with certain advancements in the field). How might I go about raising this developer's code quality standard the Dale Carnegie way, through gentle persuasion and non-material incentives? What would be the best strategy for effecting subtle, gradual changes, without creating an adversarial situation? Have other people - especially lead developers - been in this type of situation before? Which strategies were successful at stimulating interest and creating a positive group dynamic? Which strategies weren't successful and would be better to avoid? Clarifications: I really feel that several people are answering based on personal feelings without actually reading all of the details of the question. Please note the following, which should have been implied but I am now making explicit: This coworker is only my "senior" by virtue of age. I never said that his title, sphere of influence, or years at the organization exceed mine, and in fact, none of those things are true. He's a LOB programmer who's been absorbed into the main development shop. That's it. I am not a new hire, junior programmer, or other naïve idiot with grand plans to transform the company overnight. I am basically in charge of the software process, but as many who've worked as "leads" will know, responsibilities don't always correlate precisely with the org chart. I'm not asking people how to get my way, come hell or high water. I could do that if I wanted to, with the net result being that this person would become resentful and/or quit. Please try to understand that I am looking for a social, cooperative method of driving change. The mention of "...global variables... no tests... throwing System.Exception" was intended to demonstrate that the problems are not just superficial or aesthetic. Practices that may work for relatively small CRUD apps do not necessarily work for large enterprise apps, and in fact, none of the code so far has actually passed the integration tests. Please, try to take the question at face value, accept that I actually know what I'm talking about, and either answer the question that I actually asked or move on. P.S. My sincerest gratitude to those who -did- offer constructive advice rather than arguing with the premise. I'm going to leave this open for a while longer as I'm hoping to hear more in the way of real-world experiences.

  Read the article

• Love and Hate Outlook autocomplete, Outlook 2010/Exchange 2010

  - by Kay Sellenrode

  I think that almost every Exchange admin can concur with me that the Outlook autocomplete cache is one of those things you love but at the same time also hate. Users mostly love this function, except when it fails.Luckily since Outlook 2010 things got a little better and we got rid of the dreaded nk2 files.Outlook 2010 now includes a folder named "Suggested Contacts", all users you send an email to and that don't already have an contact object are saved in this suggested contacts folder.A lot of people thought this folder is also the source for the autocomplete cache, which would make it somewhat easy to manage, I wish the solution was that easy.Badly enough separate from the suggested contacts, outlook still maintains a cache for the autocomplete function. Let us say you run in to the following situation: John works for company A and is a popular contact for almost everyone in your organization.Now John quit his job at Company A and moved to Company B.Luckily John maintains your company as customer, but his email address is now changed from companyA.com to companyB.comSince you don't want to do any business with Company A anymore, you want to make sure none of your users accidentally mail to his old address.Now this is where the real fun starts, cause almost all of your 1000 users have mailed at least once with John.Resulting in the fact that every user has John most probably listed in their autocomplete cache.  I have run into sort like situations multiple times with several customers, which is always a pain.And of course this blog post is the result of one of those issues once again.I knew that with the Suggested contacts we could do more than previously, but still never spent time on it before.But today I thought lets nail this now and forever!!  Ok let's start of that things are different for every combination of outlook and exchange.I explain the procedure for Exchange 2010 SP1+ in combination with Outlook 2010.At first we want to get rid of all contact objects that contain [email protected] do this we need to be assigned to the RBAC role "Mailbox Import Export", which can be done through the Exchange Control panel.In my test environment I assigned this role to the Organization admins, but in real life you might want to add it to a custom role. Open the Exchange control panel by logging in to the ecp url, in my case https://ITFEX.itf.local/ECP, and make sure you selected your organization as management scope.Browse to Roles & Auditing, and open the properties for the organization management role group.click on the Add button to add a new role to the Organization Management role group, select the Mailbox Import Export role and click on add and OK to add it to the role.  Once you have assigned that role to your account you can open the Exchange Management Shell and execute the following command: Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –logonly –searchquery "kind:contact AND [email protected]" This command will create a list with all mailboxes and any contacts that were found with an email address that contains [email protected], this list is then posted in the mailbox you specified at your.account in the folder searchanddelete.Now examine the report that was created and posted in the mailbox to see if it matches what you think it should match.My results looked like this:  When you're confident that the search includes all references and no false positives you can execute almost the same command, but this time with an delete action instead of the logonly. Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –DeleteContent –searchquery "kind:contact AND [email protected]" Now most people would think this would remove the contact object from the suggested contacts, resulting in a removal from the autocomplete list.Sad but not true, to clean up the autocomplete list start Outlook with the command: "outlook /cleanautocompletecache" This will result in an empty cache, but luckily this is rebuild based on the suggested contacts, which now doesn't include the [email protected] contact anymore.

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >