Search Results

Search found 68825 results on 2753 pages for 'problem'.

Page 31/2753 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Parallel Port Problem in 12.04

  - by Frank Oberle

  I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

  Read the article

• Java - Draw Cards and Eliminate Cards Problem

  - by Jen

  I am having a problem in this question. I want a system inside a game wherein the player draws 2 cards randomly, and the enemy draws 2 cards randomly. Then, what the program does is to print out to the console the cards the player draw and the enemy's. The cards should not conflict and must not be the same. Then lastly, the program prints out the card that was not drawn by both the player and the enemy. Here's how I did it but it was lengthy and full of errors: import java.util.Random; public class Draw { public static Random random = new Random(); public static String cards[] = {"Hall", "Kitchen", "Billiard", "Study", "Pool"}; public static int playercounter; public static int enemycounter; public static String playercardA = null; public static String playercardB = null; public static String enemycardA = null; public static String enemycardB = null; public String lastcard = null; public static void playercardAdraw() { playercounter = random.nextInt(5); playercardA = cards[playercounter]; } public static void playercardBdraw() { playercounter=random.nextInt(5); playercardB= cards[playercounter]; if (playercardB==playercardA || playercardB == enemycardA || playercardB == enemycardB) { return; } } public static void enemycardAdraw () { enemycounter = random.nextInt(5); enemycardA=cards[enemycounter]; if (enemycardA == playercardA || enemycardA == playercardB) { return; } } public static void enemycardBdraw () { enemycounter = random.nextInt(5); enemycardB=cards[enemycounter]; if (enemycardB == playercardA || enemycardB == playercardB || enemycardB == enemycardA) { return; } } public static void main (String args []) { System.out.println("Starting to draw..."); System.out.println("Player's Turn: "); playercardAdraw(); System.out.println("Player's first card: " + playercardA); playercardBdraw(); System.out.println("Player's second card: " + playercardB); System.out.println("Enemy's Turn: "); enemycardAdraw(); System.out.println("Enemy's first card: " + enemycardA); enemycardBdraw(); System.out.println("Enemy's Second card: " + enemycardB); } }

  Read the article

• Bump mapping Problem GLSL

  - by jmfel1926

  I am having a slight problem with my Bump Mapping project. Although everything works OK (at least from what I know) there is a slight mistake somewhere and I get incorrect shading on the brick wall when the light goes to the one side or the other as seen in the picture below: The light is on the right side so the shading on the wall should be the other way. I have provided the shaders to help find the issue (I do not have much experience with shaders). Shaders: varying vec3 viewVec; varying vec3 position; varying vec3 lightvec; attribute vec3 tangent; attribute vec3 binormal; uniform vec3 lightpos; uniform mat4 cameraMat; void main() { gl_TexCoord[0] = gl_MultiTexCoord0; gl_Position = ftransform(); position = vec3(gl_ModelViewMatrix * gl_Vertex); lightvec = vec3(cameraMat * vec4(lightpos,1.0)) - position ; vec3 eyeVec = vec3(gl_ModelViewMatrix * gl_Vertex); viewVec = normalize(-eyeVec); } uniform sampler2D colormap; uniform sampler2D normalmap; varying vec3 viewVec; varying vec3 position; varying vec3 lightvec; vec3 vv; uniform float diffuset; uniform float specularterm; uniform float ambientterm; void main() { vv=viewVec; vec3 normals = normalize(texture2D(normalmap,gl_TexCoord[0].st).rgb * 2.0 - 1.0); normals.y = -normals.y; //normals = (normals * gl_NormalMatrix).xyz ; vec3 distance = lightvec; float dist_number =length(distance); float final_dist_number = 2.0/pow(dist_number,diffuset); vec3 light_dir=normalize(lightvec); vec3 Halfvector = normalize(light_dir+vv); float angle=max(dot(Halfvector,normals),0.0); angle= pow(angle,specularterm); vec3 specular=vec3(angle,angle,angle); float diffuseterm=max(dot(light_dir,normals),0.0); vec3 diffuse = diffuseterm * texture2D(colormap,gl_TexCoord[0].st).rgb; vec3 ambient = ambientterm *texture2D(colormap,gl_TexCoord[0].st).rgb; vec3 diffusefinal = diffuse * final_dist_number; vec3 finalcolor=diffusefinal+specular+ambient; gl_FragColor = vec4(finalcolor, 1.0); }

  Read the article

• Can't boot Ubuntu 12.10 graphics problem

  - by Frantumn

  I can't boot since installing Ubuntu 12.10 When I try to run Ubuntu My computer never gets to the Ubuntu screen with the loading dots. I tried to run in recovery mode with safe graphics (failsafex) When I do this a message pops up saying "the system is running in low graphics mode", If I click okay I am asked what would I like to do and am given four options. I tried running low graphics for one session and then a message appears with a progress bar and says standby one minute while the display restarts. The progress bar never moves and if I click okay the whole process just restarts. I Don't know what to do from here I can't get into the OS. I'm not sure whether the problem is related to compatibility with my laptop monitor or my graphic card nvidia360m I had to install using a safe graphics mode. To learn about how I installed see this link. This link also has information on my computer hardware. Can't install Ubuntu since 10.10 ----UPDATE--- I was able to get into a desktop environment By installing Nvidia-current however it is messy. I have a screen and I am able to see my desktop however there is no unity bar and none of the keyboard controls work. I can right click and create a folder on the desktop and then I can see inside that folder in a traditional browser window. There is still no top menu or unity bar. When I boot normally I don't get into the desktop environment and I get this message in tty 'GPU lockup switching to software FBCON' Okay, I've played around with tips the pages from comments. I've been able to consistantly get into a safemode desktop environment using the xorg & nouveau drivers. I've tried switching between the 5 different options in the Additional Drivers tab in Software Sources. The nVidia (proprietary, tested) driver gets beyond the GPU lockup on a normal boot and actually gets into a Desktop. The issue is then that there is no Unity bar, or top screen menu bar and the resolution is very low. I've tried switching to the (prop, tested) driver and then reinstalling Unity and Ubuntu-Desktop but that didn't work either.

  Read the article

• Draw Cards and Eliminate Cards Problem

  - by Jen

  I am having a problem in this question. I want a system inside a game wherein the player draws 2 cards randomly, and the enemy draws 2 cards randomly. Then, what the program does is to print out to the console the cards the player draw and the enemy's. The cards should not conflict and must not be the same. Then lastly, the program prints out the card that was not drawn by both the player and the enemy. Here's how I did it but it was lengthy and full of errors: import java.util.Random; public class Draw { public static Random random = new Random(); public static String cards[] = {"Hall", "Kitchen", "Billiard", "Study", "Pool"}; public static int playercounter; public static int enemycounter; public static String playercardA = null; public static String playercardB = null; public static String enemycardA = null; public static String enemycardB = null; public String lastcard = null; public static void playercardAdraw() { playercounter = random.nextInt(5); playercardA = cards[playercounter]; } public static void playercardBdraw() { playercounter=random.nextInt(5); playercardB= cards[playercounter]; if (playercardB==playercardA || playercardB == enemycardA || playercardB == enemycardB) { return; } } public static void enemycardAdraw () { enemycounter = random.nextInt(5); enemycardA=cards[enemycounter]; if (enemycardA == playercardA || enemycardA == playercardB) { return; } } public static void enemycardBdraw () { enemycounter = random.nextInt(5); enemycardB=cards[enemycounter]; if (enemycardB == playercardA || enemycardB == playercardB || enemycardB == enemycardA) { return; } } public static void main (String args []) { System.out.println("Starting to draw..."); System.out.println("Player's Turn: "); playercardAdraw(); System.out.println("Player's first card: " + playercardA); playercardBdraw(); System.out.println("Player's second card: " + playercardB); System.out.println("Enemy's Turn: "); enemycardAdraw(); System.out.println("Enemy's first card: " + enemycardA); enemycardBdraw(); System.out.println("Enemy's Second card: " + enemycardB); } }

  Read the article

• problem in repairing software center

  - by REGZEN

  what should be done regarding this error(software center) - installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. this error is repeating whenever i am repairing software center. I'm having problems with my software center .. when i want to install some package that following message it appears "items cannot be installed or removed until the package catalog is repaired. do you want to repair it now?" after i click Repair, another window pops up, saying : "Package operation fails - The installation or removal of a software package failed" I click repair, and a few seconds later, it pops up again!!!! no matter how many times i click repair, nothing happens. Also .. I've Another Problem With Update Manager That Shows Me The Following Message: " the package system is broken. Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f" also, i tried sudo apt-get install -f i got this error... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) Please provide a solution

  Read the article

• Problem trying to lock framerate at 60 FPS

  - by shad0w

  I've written a simple class to limit the framerate of my current project. But it does not work as it should. Here is the code: void FpsCounter::Process() { deltaTime = static_cast<double>(frameTimer.GetMsecs()); waitTime = 1000.0/fpsLimit - deltaTime; frameTimer.Reset(); if(waitTime <= 0) { std::cout << "error, waittime: " << waitTime << std::endl; } else { SDL_Delay(static_cast<Uint32>(waitTime)); } if(deltaTime == 0) { currFps = -1; } else { currFps = 1000/deltaTime; } std::cout << "--Timings--" << std::endl; std::cout << "Delta: \t" << deltaTime << std::endl; std::cout << "Delay: \t" << waitTime << std::endl; std::cout << "FPS: \t" << currFps << std::endl; std::cout << "-- --" << std::endl; } Timer::Timer() { startMsecs = 0; } Timer::~Timer() { // TODO Auto-generated destructor stub } void Timer::Start() { started = true; paused = false; Reset(); } void Timer::Pause() { if(started && !paused) { paused = true; pausedMsecs = SDL_GetTicks() - startMsecs; } } void Timer::Resume() { if(paused) { paused = false; startMsecs = SDL_GetTicks() - pausedMsecs; pausedMsecs = 0; } } int Timer::GetMsecs() { if(started) { if(paused) { return pausedMsecs; } else { return SDL_GetTicks() - startMsecs; } } return 0; } void Timer::Reset() { startMsecs = SDL_GetTicks(); } The "FpsCounter::Process()" Method is called everytime at the end of my gameloop. I've got the problem that the loop is correctly delayed only every second frame, so it runs one frame delayed at 60 FPS and the next without delay at over 1000 fps. I am searching the error quite a while now, but I do not find it. I hope somebody can point me in the right direction.

  Read the article

• android multitouch problem

  - by Max

  Im aware that there a a couple of posts on this matter, but Ive tried all of them and none of them gets rid of my problem. Im starting to get close to the end of my game so I bought a cabel to try it on a real phone, and as I expected my multitouch dosnt work. I use 2 joysticks, one to move my character and one to change his direction so he can shoot while walking backwards etc. my local variable: public void update(MotionEvent event) { if (event == null && lastEvent == null) { return; } else if (event == null && lastEvent != null) { event = lastEvent; } else { lastEvent = event; } int index = event.getActionIndex(); int pointerId = event.getPointerId(index); statement for left Joystick: if (pointerId == 0 && event.getAction() == MotionEvent.ACTION_DOWN && (int) event.getX() > steeringxMesh - 50 && (int) event.getX() < steeringxMesh + 50 && (int) event.getY() > yMesh - 50 && (int) event.getY() < yMesh + 50) { dragging = true; } else if (event.getAction() == MotionEvent.ACTION_UP) { dragging = false; } if (dragging) { //code for moving my character statement for my right joystick: if (pointerId == 1 && event.getAction() == MotionEvent.ACTION_DOWN && (int) event.getX() > shootingxMesh - 50 && (int) event.getX() < shootingxMesh + 50 && (int) event.getY() > yMesh - 50 && (int) event.getY() < yMesh + 50) { shooting = true; } else if (event.getAction() == MotionEvent.ACTION_UP) { shooting = false; } if (shooting) { // code for aiming } This class is my main-Views onTouchListener and is called in a update-method that gets called in my game-loop, so its called every frame. Im really at a loss here, I've done a couple of tutorials and Ive tried all relevant solutions to similar posts. Can post entire Class if necessary but I think this is all the relevant code. Just hope someone can make some sence out of this.

  Read the article

• Multi-threaded JOGL Problem

  - by moeabdol

  I'm writing a simple OpenGL application in Java that implements the Monte Carlo method for estimating the value of PI. The method is pretty easy. Simply, you draw a circle inside a unit square and then plot random points over the scene. Now, for each point that is inside the circle you increment the counter for in points. After determining for all the random points wither they are inside the circle or not you divide the number of in points over the total number of points you have plotted all multiplied by 4 to get an estimation of PI. It goes something like this PI = (inPoints / totalPoints) * 4. This is because mathematically the ratio of a circle's area to a square's area is PI/4, so when we multiply it by 4 we get PI. My problem doesn't lie in the algorithm itself; however, I'm having problems trying to plot the points as they are being generated instead of just plotting everything at once when the program finishes executing. I want to give the application a sense of real-time display where the user would see the points as they are being plotted. I'm a beginner at OpenGL and I'm pretty sure there is a multi-threading feature built into it. Non the less, I tried to manually create my own thread. Each worker thread plots one point at a time. Following is the psudo-code: /* this part of the code exists in display() method in MyCanvas.java which extends GLCanvas and implements GLEventListener */ // main loop for(int i = 0; i < number_of_points; i++){ RandomGenerator random = new RandomGenerator(); float x = random.nextFloat(); float y = random.nextFloat(); Thread pointThread = new Thread(new PointThread(x, y)); } gl.glFlush(); /* this part of the code exists in run() method in PointThread.java which implements Runnable */ void run(){ try{ gl.glPushMatrix(); gl.glBegin(GL2.GL_POINTS); if(pointIsIn) gl.glColor3f(1.0f, 0.0f, 0.0f); // red point else gl.glColor3f(0.0f, 0.0f, 1.0f); // blue point gl.glVertex3f(x, y, 0.0f); // coordinates gl.glEnd(); gl.glPopMatrix(); }catch(Exception e){ } } I'm not sure if my approach to solving this issue is correct. I hope you guys can help me out. Thanks.

  Read the article

• Problem with DualBooting Ubuntu 13.10 and Win7

  - by VinArrow

  this is my first post here on AskUbuntu, not first time using it though. I wanted to install Ubuntu 13.10 on my PC to have all my work stuff there and leave Win7 for gaming. So i did my research on how to Dual Boot when you already have Win7 installed, here are the steps i took Used Disk Management on Win7 and shrunk that partition, leaving 80GB free for Ubuntu. Made a Bootable pendrive following the instructions on Ubuntu`s website. During the installation steps there was supposed to be a Install alongside Win7, but there wasnt, so i chose Something else. Everything was fine and i was able to install Ubuntu no problem on my unallocated 80GB partition (76GB Ubuntu + 4GB swap) There was a prompt for me to restart my PC and so I did expecting to see the dual boot screen (grub right?) Now, when i restarted my PC, Grub never showed up and it booted straight to Windows. Then I did some more research and found out that that could happen. Tried three things then Plugging in bootable pendrive again and selected Try Ubuntu without installing. Then i followed some instructions found here (How can I repair grub? (How to get Ubuntu back after installing Windows?)) and i could chroot into my Ubuntu install just fine. Repaired grub as instructed on that link, restarted the PC and booted straight into Win7 again. Again, used the bootable pen drive to Try Ubuntu... and used the Boot-repair tool (recommended repair). Again, booted straight into Win7. Lastly, i installed easyBCD on my Win7 and made a new entry for Ubuntu (Linux/BSD). When i rebooted the PC, there was the option to choose between Win7 and Linux, chose linux and it didnt work, taking me straight to a command line-like enviroment that read Minimum bash like scripting or something, as if I didn`t have a Linux OS installed. So, I thought I`d try and repair my Ubuntu install. And during the Installation method step there was the choice to install alongside Ubuntu 13.10! and that right there drove me crazy. Here is a screenshot of gparted showing how things are set up now http://imageshack.us/f/801/77u3.png/ Notice on the left-hand side how i can access my installation files just fine. sdb1- win7 reserved space, sdb2- win7 OS, sdb3- 76GB ubuntu install, sdb5- 4GB swap area. Does anyone know why my Ubuntu 13.10 is not being recognized? and what should I do to get it working? Thanks and sorry for the long read and bad english! (BIOS = legacy)

  Read the article

• Ati X1600 driver problem on Mac

  - by Mulot

  Hi all, I currently own a 06' Macbook pro 1.1, and since some months I have recurrent problems of displays bug or artifacts. I searched quickly around to see that a lot of other users on Mac (iMac or Macbook pro) also have the same problem due to a problem for the X1600 video card. Apparently it's due to overheating problem, in my case even without warming a lot I have very bad display bugs such as colorful pixel lines, or glitches, and freeze and crash, all of this on Tiger, Leopard and Snow Leopard. I found this interesting article here talking about this problem and trying to gather people so that Apple take the serious GPU problem in consideration. In one of the comments, an user said he removed all bundle named with "radeon" and then he had no more problems under Leopard, and seems ot work fine well too on Snow Leopard. I did the same thing, I removed the bundles of the driver, restart, and no more problems, but not more 3D acceleration, which is not an acceptable solution. For those interested, here is the list of files to be deleted to stop having this problem. /System/Library/Extensions/ATIRadeonX1000.kext /System/Library/Extensions/ATIRadeonX1000GA.plugin /System/Library/Extensions/ATIRadeonX1000GLDriver.bundle /System/Library/Extensions/ATIRadeonX1000VADriver.bundle /System/Library/Extensions/ATIRadeonX2000.kext /System/Library/Extensions/ATIRadeonX2000GA.plugin /System/Library/Extensions/ATIRadeonX2000GLDriver.bundle /System/Library/Extensions/ATIRadeonX2000VADriver.bundle I would like to know if there is a way to fix this using other drivers if that's possible or by creating a group to force Apple to make a replacement program in place. Edit : How to locate those files on your hard drive if you are not under Snow Tiger : sudo find / -iname "*radeon*"

  Read the article

• SQLAuthority News – Interview with SQL Server MVP Madhivanan – A Real Problem Solver

  - by pinaldave

  Madhivanan (SQL Server MVP) is a real community hero. He is known for his two skills – 1) Help Community and 2) Help Community. I have met him many times and every time I feel if anybody in online world needs help Madhinvanan does his best to reach them out and solve problem. His name is not new if you are ready this blog or have ever asked a question in any online SQL forum. He is always there to help. When Madhivanan has time he even helps people on this blog as well. He spends his valuable time to help community only. He recently crossed over 1000 helpful comments on this blog. On that occasion, I have interviewed him to find out if he has any life outside SQL. Q 1. Tell us something about your self. I am Madhivanan ,an MSc computer Science graduate from Chennai, India and working as a Lead Analyst-Project at Ellaar Infotek Solutions Private Limited. I am basically a developer started with Visual Basic 6.0, SQL Server 2000 and Crystal Report 8. As years go on I started working more on writing queries in SQL Server in most of the projects developed in my company. I have some good level of knowledge in ORACLE, MySQL and PostgreSQL as well. Now I am leading a project develeoped in Windows Azure. Q 2. What motivates you to help people on community and forums. When I got some errors during the application development in my early days of my career, I got good solutions from online forums and weblogs. So I decided to help others if possible. When I visit forums and help people if I know the answer to the questions. I am one of the leading posters at www.sqlteam.com and also a moderator at www.sql-server-performance.com. I also take part in Visual Basic and Crystal Reports forums. I have been SQL Server MVP since 2007. Q 3. Your personal life is not much known. Tell us something about your personal life. I am happily married person. My wife is a B.Pharm graduate. I have a son who is now 18 months old. Q 4. Where can we read further for your community activity. I have a blog at http://beyondrelational.com/blogs/madhivanan where you can find most of my T-sql stuffs Q 5. When not working with SQL what do you do? When not working with SQL, I spend time playing with my son, reading some magazines and watching TV. Madhivanan for your work and help to community, a true salute to you. Hats off my friend. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Finding the problem on a partially succeeded build

  - by Martin Hinshelwood

  Now that I have the Build failing because of a genuine bug and not just because of a test framework failure, lets see if we can trace through to finding why the first test in our new application failed. Lets look at the build and see if we can see why there is a red cross on it. First, lets open that build list. On Team Explorer Expand your Team Project Collection | Team Project and then Builds. Double click the offending build. Figure: Opening the Build list is a key way to see what the current state of your software is.   Figure: A test is failing, but we can now view the Test Results to find the problem      Figure: You can quite clearly see that the test has failed with “The device is not ready”. To me the “The Device is not ready” smacks of a System.IO exception, but it passed on my local computer, so why not on the build server? Its a FaultException so it is most likely coming from the Service and not the client, so lets take a look at the client method that the test is calling: bool IProfileService.SaveDefaultProjectFile(string strComputerName) { ProjectFile file = new ProjectFile() { ProjectFileName = strComputerName + "_" + System.DateTime.Now.ToString("yyyyMMddhhmmsss") + ".xml", ConnectionString = "persist security info=False; pooling=False; data source=(local); application name=SSW.SQLDeploy.vshost.exe; integrated security=SSPI; initial catalog=SSWSQLDeployNorthwindSample", DateCreated = System.DateTime.Now, DateUpdated = System.DateTime.Now, FolderPath = @"C:\Program Files\SSW SQL Deploy\SampleData\", IsComplete=false, Version = "1.3", NewDatabase = true, TimeOut = 5, TurnOnMSDE = false, Mode="AutomaticMode" }; string strFolderPath = "D:\\"; //LocalSettings.ProjectFileBasePath; string strFileName = strFolderPath + file.ProjectFileName; try { using (FileStream fs = new FileStream(strFileName, FileMode.Create)) { DataContractSerializer serializer = new DataContractSerializer(typeof(ProjectFile)); using (XmlDictionaryWriter writer = XmlDictionaryWriter.CreateTextWriter(fs)) { serializer.WriteObject(writer, file); } } } catch (Exception ex) { //TODO: Log the exception throw ex; return false; } return true; } Figure: You can see on lines 9 and 18 that there are calls being made to specific folders and disks. What is wrong with this code? What assumptions mistakes could the developer have made to make this look OK: That every install would be to “C:\Program Files\SSW SQL Deploy” That every computer would have a “D:\\” That checking in code at 6pm because the had to go home was a good idea. lets solve each of these problems: We are in a web service… lets store data within the web root. So we can call “Server.MapPath(“~/App_Data/SSW SQL Deploy\SampleData”) instead. Never reference an explicit path. If you need some storage for your application use IsolatedStorage. Shelve your code instead. What else could have been done? Code review before check-in – The developer should have shelved their code and asked another dev to look at it. Use Defensive programming – Make sure that any code that has the possibility of failing has checks. Any more options? Let me know and I will add them. What do we do? The correct things to do is to add a Bug to the backlog, but as this is probably going to be fixed in sprint, I will add it directly to the sprint backlog. Right click on the failing test Select “Create Work Item | Bug” Figure: Create an associated bug to add to the backlog. Set the values for the Bug making sure that it goes into the right sprint and Area. Make your steps to reproduce as explicit as possible, but “See test” is valid under these circumstances.   Figure: Add it to the correct Area and set the Iteration to the Area name or the Sprint if you think it will be fixed in Sprint and make sure you bring it up at the next Scrum Meeting. Note: make sure you leave the “Assigned To” field blank as in Scrum team members sign up for work, you do not give it to them. The developer who broke the test will most likely either sign up for the bug, or say that they are stuck and need help. Note: Visual Studio has taken care of associating the failing test with the Bug. Save… Technorati Tags: WCF,MSTest,MSBuild,Team Build 2010,Team Test 2010,Team Build,Team Test

  Read the article

• Problem with apt-get update: failed to fetch error

  - by user171447

  I run an Ubuntu Server 12.04.3 LTS. Today, I wanted to update it, but I did not managed it (yes...), however upgrading worked well. I don't want you to solve my problem but it would be greatful if you could give me some hints. I googled hours, I fould a lot of this kind of errors, but not exactly this. Here is the output of apt-get update: Hit http://filepile.fastit.net precise Release.gpg Hit http://filepile.fastit.net precise Release Hit http://filepile.fastit.net precise/main amd64 Packages Hit http://filepile.fastit.net precise/restricted amd64 Packages Hit http://filepile.fastit.net precise/universe amd64 Packages Hit http://filepile.fastit.net precise/multiverse amd64 Packages Hit http://filepile.fastit.net precise/main i386 Packages Hit http://filepile.fastit.net precise/restricted i386 Packages Hit http://filepile.fastit.net precise/universe i386 Packages Hit http://filepile.fastit.net precise/multiverse i386 Packages Ign http://filepile.fastit.net precise/main TranslationIndex Ign http://filepile.fastit.net precise/multiverse TranslationIndex Ign http://filepile.fastit.net precise/restricted TranslationIndex Ign http://filepile.fastit.net precise/universe TranslationIndex Ign http://filepile.fastit.net precise/main Translation-en_GB Ign http://filepile.fastit.net precise/main Translation-en Ign http://filepile.fastit.net precise/main Translation-en_GB.UTF-8 Hit http://archive.canonical.com precise Release.gpg Ign http://filepile.fastit.net precise/multiverse Translation-en_GB Ign http://filepile.fastit.net precise/multiverse Translation-en Ign http://filepile.fastit.net precise/multiverse Translation-en_GB.UTF-8 Ign http://filepile.fastit.net precise/restricted Translation-en_GB Ign http://filepile.fastit.net precise/restricted Translation-en Ign http://filepile.fastit.net precise/restricted Translation-en_GB.UTF-8 Ign http://filepile.fastit.net precise/universe Translation-en_GB Ign http://filepile.fastit.net precise/universe Translation-en Ign http://filepile.fastit.net precise/universe Translation-en_GB.UTF-8 Hit http://archive.ubuntu.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.ubuntu.com precise Release Hit http://archive.ubuntu.com precise/main Sources Hit http://archive.ubuntu.com precise/restricted Sources Hit http://archive.ubuntu.com precise/main i386 Packages Hit http://archive.ubuntu.com precise/restricted i386 Packages Hit http://archive.ubuntu.com precise/multiverse i386 Packages Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://archive.ubuntu.com precise/restricted TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en_GB Hit http://archive.ubuntu.com precise/main Translation-en Hit http://archive.ubuntu.com precise/multiverse Translation-en_GB Hit http://archive.ubuntu.com precise/multiverse Translation-en Hit http://archive.ubuntu.com precise/restricted Translation-en_GB Hit http://archive.ubuntu.com precise/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-security Release.gpg Hit http://fr.archive.ubuntu.com precise-updates Release.gpg Hit http://fr.archive.ubuntu.com precise-security Release Hit http://fr.archive.ubuntu.com precise-updates Release Hit http://fr.archive.ubuntu.com precise-security/main amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/restricted amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/universe amd64 Packages Hit http://fr.archive.ubuntu.com precise-security/multiverse amd64 Packages :W: Failed to fetch http://archive.canonical.com/dists/precise/Release Unable to find expected entry 'main/binary-amd64/Packages' in Release file (Wrong sources.list entry or malformed file) E: Some index files failed to download. They have been ignored, or old ones used instead. Hit http://fr.archive.ubuntu.com precise-security/main i386 Packages Hit http://fr.archive.ubuntu.com precise-security/restricted i386 Packages Hit http://fr.archive.ubuntu.com precise-security/universe i386 Packages Hit http://fr.archive.ubuntu.com precise-security/multiverse i386 Packages Hit http://fr.archive.ubuntu.com precise-security/main TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/multiverse TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/restricted TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/universe TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/main amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/restricted amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/universe amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/multiverse amd64 Packages Hit http://fr.archive.ubuntu.com precise-updates/main i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/restricted i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/universe i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/multiverse i386 Packages Hit http://fr.archive.ubuntu.com precise-updates/main TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/restricted TranslationIndex Hit http://fr.archive.ubuntu.com precise-updates/universe TranslationIndex Hit http://fr.archive.ubuntu.com precise-security/main Translation-en Hit http://fr.archive.ubuntu.com precise-security/multiverse Translation-en Hit http://fr.archive.ubuntu.com precise-security/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-security/universe Translation-en Hit http://fr.archive.ubuntu.com precise-updates/main Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/main Translation-en Hit http://fr.archive.ubuntu.com precise-updates/multiverse Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://fr.archive.ubuntu.com precise-updates/restricted Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/restricted Translation-en Hit http://fr.archive.ubuntu.com precise-updates/universe Translation-en_GB Hit http://fr.archive.ubuntu.com precise-updates/universe Translation-en And here is my /etc/apt/sources.list: ###### Ubuntu Main Repos deb http://filepile.fastit.net/ubuntu/ precise main restricted universe multiverse # deb http://de.archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.canonical.com/ precise main restricted universe multiverse ###### Ubuntu Update Repos deb http://fr.archive.ubuntu.com/ubuntu/ precise-security main restricted universe multiverse deb http://fr.archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise main restricted multiverse deb-src http://archive.ubuntu.com/ubuntu precise main restricted multiverse Thanks for your help!

  Read the article

• Silabs cp2102 driver problem

  - by Zxy

  I downloaded appropriate driver from its own site, unzipped it and then tried to install it. But: root@ghostrider:/home/zero/Downloads# tar xvf cp210x-3.1.0.tar.gz cp210x-3.1.0/ cp210x-3.1.0/COPYING cp210x-3.1.0/cp210x/ cp210x-3.1.0/cp210x-3.1.0.spec cp210x-3.1.0/cp210x/.rpmmacros cp210x-3.1.0/cp210x/configure cp210x-3.1.0/cp210x/cp210x.c cp210x-3.1.0/cp210x/cp210x.h cp210x-3.1.0/cp210x/cp210xuniversal.c cp210x-3.1.0/cp210x/cp210xuniversal.h cp210x-3.1.0/cp210x/installmod cp210x-3.1.0/cp210x/Makefile24 cp210x-3.1.0/cp210x/Makefile26 cp210x-3.1.0/cp210x/rpmmacros24 cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0/cp210x/Rules.make cp210x-3.1.0/INSTALL cp210x-3.1.0/makerpm cp210x-3.1.0/PACKAGE-LIST cp210x-3.1.0/README cp210x-3.1.0/RELEASE-NOTES cp210x-3.1.0/REPORTING-BUGS cp210x-3.1.0/rpm/ cp210x-3.1.0/rpm/brp-java-repack-jars cp210x-3.1.0/rpm/brp-python-bytecompile cp210x-3.1.0/rpm/check-rpaths cp210x-3.1.0/rpm/check-rpaths-worker root@ghostrider:/home/zero/Downloads# cd cp210x-3.1.0 root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# ls COPYING cp210x-3.1.0.spec makerpm README REPORTING-BUGS cp210x INSTALL PACKAGE-LIST RELEASE-NOTES rpm root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# run ./makerpm No command 'run' found, did you mean: Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'exim4-daemon-light' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (universe) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# sudo ./makerpm + uname -r + kernel_release=3.2.0-25-generic-pae + pwd + current_dir=/home/zero/Downloads/cp210x-3.1.0 + export current_dir + uname -r + KVER=3.2.0-25-generic-pae + echo 3.2.0-25-generic-pae + awk -F . -- { print $1 } + KVER1=3 + echo 3.2.0-25-generic-pae + awk -F . -- { print $2 } + KVER2=2 + sed -e s/3\.2\.//g + echo 3.2.0-25-generic-pae + KVER3=0-25-generic-pae + [ -f /root/.rpmmacros ] + echo 2 2 + [ 2 == 4 ] ./makerpm: 25: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 29: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /root/.rpmmacros + d=/var/tmp/silabs + [ ! -d /var/tmp/silabs ] + mkdir /var/tmp/silabs + cd /var/tmp/silabs + r=/var/tmp/silabs/rpmbuild + o=cp210x-3.1.0 + s=/var/tmp/silabs/rpmbuild/SOURCES + spec=cp210x-3.1.0.spec + rm -rf /var/tmp/silabs/rpmbuild + mkdir rpmbuild + mkdir rpmbuild/SOURCES + mkdir rpmbuild/SRPMS + mkdir rpmbuild/SPECS + mkdir rpmbuild/BUILD + mkdir rpmbuild/RPMS + cd /var/tmp/silabs/rpmbuild/SOURCES + rm -rf cp210x-3.1.0 + mkdir cp210x-3.1.0 + cp -r /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile24 /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile26 /home/zero/Downloads/cp210x- 3.1.0/cp210x/Rules.make /home/zero/Downloads/cp210x-3.1.0/cp210x/configure /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210x.c /home/zero/Downloads/cp210x- 3.1.0/cp210x/cp210x.h /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.c /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.h /home/zero/Downloads/cp210x- 3.1.0/cp210x/installmod /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0 + echo 2 2 + [ 2 == 4 ] ./makerpm: 64: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 68: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24 cp210x-3.1.0/.rpmmacros cp: cannot stat `/home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24': No such file or directory + MyCopy=0 + rm -f cp210x-3.1.0.tar + rm -f cp210x-3.1.0.tar.gz + tar -cf cp210x-3.1.0.tar cp210x-3.1.0 + gzip cp210x-3.1.0.tar + cp /home/zero/Downloads/cp210x-3.1.0/cp210x-3.1.0.spec /var/tmp/silabs/rpmbuild/SPECS + rpmbuild -ba /var/tmp/silabs/rpmbuild/SPECS/cp210x-3.1.0.spec ./makerpm: 121: ./makerpm: rpmbuild: not found + [ -f /root/.rpmmacros.cp210x ] How may I solve my problem? Thanks

  Read the article

• about the JOGL 2 problem

  - by Chuchinyi

  Please some help me about the JOGL 2 problem(Sorry for previous error format). I complied JOGL2Template.java ok. but execut it with following error. D:\java\java\jogl>javac JOGL2Template.java <== compile ok D:\java\java\jogl>java JOGL2Template <== execute error Exception in thread "main" java.lang.ExceptionInInitializerError at javax.media.opengl.GLProfile.<clinit>(GLProfile.java:1176) at JOGL2Template.<init>(JOGL2Template.java:24) at JOGL2Template.main(JOGL2Template.java:57) Caused by: java.lang.SecurityException: no certificate for gluegen-rt.dll in D:\ java\lib\gluegen-rt-natives-windows-i586.jar at com.jogamp.common.util.JarUtil.validateCertificate(JarUtil.java:350) at com.jogamp.common.util.JarUtil.validateCertificates(JarUtil.java:324) at com.jogamp.common.util.cache.TempJarCache.validateCertificates(TempJa rCache.java:328) at com.jogamp.common.util.cache.TempJarCache.bootstrapNativeLib(TempJarC ache.java:283) at com.jogamp.common.os.Platform$3.run(Platform.java:308) at java.security.AccessController.doPrivileged(Native Method) at com.jogamp.common.os.Platform.loadGlueGenRTImpl(Platform.java:298) at com.jogamp.common.os.Platform.<clinit>(Platform.java:207) ... 3 more there is JOGL2Template.java source code: import java.awt.Dimension; import java.awt.Frame; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import javax.media.opengl.GLAutoDrawable; import javax.media.opengl.GLCapabilities; import javax.media.opengl.GLEventListener; import javax.media.opengl.GLProfile; import javax.media.opengl.awt.GLCanvas; import com.jogamp.opengl.util.FPSAnimator; import javax.swing.JFrame; /* * JOGL 2.0 Program Template For AWT applications */ public class JOGL2Template extends JFrame implements GLEventListener { private static final int CANVAS_WIDTH = 640; // Width of the drawable private static final int CANVAS_HEIGHT = 480; // Height of the drawable private static final int FPS = 60; // Animator's target frames per second // Constructor to create profile, caps, drawable, animator, and initialize Frame public JOGL2Template() { // Get the default OpenGL profile that best reflect your running platform. GLProfile glp = GLProfile.getDefault(); // Specifies a set of OpenGL capabilities, based on your profile. GLCapabilities caps = new GLCapabilities(glp); // Allocate a GLDrawable, based on your OpenGL capabilities. GLCanvas canvas = new GLCanvas(caps); canvas.setPreferredSize(new Dimension(CANVAS_WIDTH, CANVAS_HEIGHT)); canvas.addGLEventListener(this); // Create a animator that drives canvas' display() at 60 fps. final FPSAnimator animator = new FPSAnimator(canvas, FPS); addWindowListener(new WindowAdapter() { // For the close button @Override public void windowClosing(WindowEvent e) { // Use a dedicate thread to run the stop() to ensure that the // animator stops before program exits. new Thread() { @Override public void run() { animator.stop(); System.exit(0); } }.start(); } }); add(canvas); pack(); setTitle("OpenGL 2 Test"); setVisible(true); animator.start(); // Start the animator } public static void main(String[] args) { new JOGL2Template(); } @Override public void init(GLAutoDrawable drawable) { // Your OpenGL codes to perform one-time initialization tasks // such as setting up of lights and display lists. } @Override public void display(GLAutoDrawable drawable) { // Your OpenGL graphic rendering codes for each refresh. } @Override public void reshape(GLAutoDrawable drawable, int x, int y, int w, int h) { // Your OpenGL codes to set up the view port, projection mode and view volume. } @Override public void dispose(GLAutoDrawable drawable) { // Hardly used. } }

  Read the article

• Problem when trying to update "Duplicate sources.list"

  - by Coca Akat

  I got this problem when trying to update using sudo apt-get update W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ saucy-backports/multiverse amd64 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_saucy-backports_multiverse_binary-amd64_Packages) W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ saucy-backports/multiverse i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_saucy-backports_multiverse_binary-i386_Packages) W: You may want to run apt-get update to correct these problems This is my souces.list : # deb cdrom:[Ubuntu 13.10 _Saucy Salamander_ - Release amd64 (20131016.1)]/ saucy main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu saucy main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu saucy-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy universe deb http://archive.ubuntu.com/ubuntu saucy-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu saucy multiverse deb http://archive.ubuntu.com/ubuntu saucy-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu saucy-security main restricted deb http://archive.ubuntu.com/ubuntu saucy-security universe deb http://archive.ubuntu.com/ubuntu saucy-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu saucy main # deb-src http://extras.ubuntu.com/ubuntu saucy main # deb http://archive.canonical.com/ saucy partner # deb-src http://archive.canonical.com/ saucy partner # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. ## Major bug fix updates produced after the final release of the ## distribution. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu saucy-backports multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software.

  Read the article

• Problem with script substitution when running script

  - by tucaz

  Hi! I'm new to Linux so this probably should be an easy fix, but I cannot see it. I have a script downloaded from official sources that is used to install additional tools for fsharp but it gives me a syntax error when running it. I tried to replace ( and ) by { and } but eventually it lead me to another error so I think this is not the problem since the script works for everybody. I read some articles that say that my bash version maybe is not the right one. I'm using Ubuntu 10.10 and here is the error: install-bonus.sh: 28: Syntax error: "(" unexpected (expecting "}") And this is line 27, 28 and 29: { declare -a DIRS=("${!3}") FILE=$2 And the full script: #! /bin/sh -e PREFIX=/usr BIN=$PREFIX/bin MAN=$PREFIX/share/man/man1/ die() { echo "$1" &2 echo "Installation aborted." &2 exit 1 } echo "This script will install additional material for F# including" echo "man pages, fsharpc and fsharpi scripts and Gtk# support for F#" echo "Interactive (root access needed)" echo "" # ------------------------------------------------------------------------------ # Utility function that searches specified directories for a specified file # and if the file is not found, it asks user to provide a directory RESULT="" searchpaths() { declare -a DIRS=("${!3}") FILE=$2 DIR=${DIRS[0]} for TRYDIR in ${DIRS[@]} do if [ -f $TRYDIR/$FILE ] then DIR=$TRYDIR fi done while [ ! -f $DIR/$FILE ] do echo "File '$FILE' was not found in any of ${DIRS[@]}. Please enter $1 installation directory:" read DIR done RESULT=$DIR } # ------------------------------------------------------------------------------ # Locate F# installation directory - this is needed, because we want to # add environment variable with it, generate 'fsharpc' and 'fsharpi' and also # copy load-gtk.fsx to that directory # ------------------------------------------------------------------------------ PATHS=( $1 /usr/lib/fsharp /usr/lib/shared/fsharp ) searchpaths "F# installation" FSharp.Core.dll PATHS[@] FSHARPDIR=$RESULT echo "Successfully found F# installation directory." # ------------------------------------------------------------------------------ # Check that we have everything we need # ------------------------------------------------------------------------------ [ $(id -u) -eq 0 ] || die "Please run the script as root." which mono /dev/null || die "mono not found in PATH." # ------------------------------------------------------------------------------ # Make sure that all additional assemblies are in GAC # ------------------------------------------------------------------------------ echo "Installing additional F# assemblies to the GAC" gacutil -i $FSHARPDIR/FSharp.Build.dll gacutil -i $FSHARPDIR/FSharp.Compiler.dll gacutil -i $FSHARPDIR/FSharp.Compiler.Interactive.Settings.dll gacutil -i $FSHARPDIR/FSharp.Compiler.Server.Shared.dll # ------------------------------------------------------------------------------ # Install additional files # ------------------------------------------------------------------------------ # Install man pages echo "Installing additional F# commands, scripts and man pages" mkdir -p $MAN cp *.1 $MAN # Export the FSHARP_COMPILER_BIN environment variable if [[ ! "$OSTYPE" =~ "darwin" ]]; then echo "export FSHARP_COMPILER_BIN=$FSHARPDIR" fsharp.sh mv fsharp.sh /etc/profile.d/ fi # Generate 'load-gtk.fsx' script for F# Interactive (ask user if we cannot find binaries) PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/gtk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Gtk#" gtk-sharp.dll PATHS[@] GTKDIR=$RESULT echo "Successfully found Gtk# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/glib-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Glib" glib-sharp.dll PATHS[@] GLIBDIR=$RESULT echo "Successfully found Glib# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/atk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Atk#" atk-sharp.dll PATHS[@] ATKDIR=$RESULT echo "Successfully found Atk# root directory." PATHS=( /usr/lib/mono/gtk-sharp-2.0 /usr/lib/cli/gdk-sharp-2.0 /Library/Frameworks/Mono.framework/Versions/2.8/lib/mono/gtk-sharp-2.0 ) searchpaths "Gdk#" gdk-sharp.dll PATHS[@] GDKDIR=$RESULT echo "Successfully found Gdk# root directory." cp bonus/load-gtk.fsx load-gtk1.fsx sed "s,INSERTGTKPATH,$GTKDIR,g" load-gtk1.fsx load-gtk2.fsx sed "s,INSERTGDKPATH,$GDKDIR,g" load-gtk2.fsx load-gtk3.fsx sed "s,INSERTATKPATH,$ATKDIR,g" load-gtk3.fsx load-gtk4.fsx sed "s,INSERTGLIBPATH,$GLIBDIR,g" load-gtk4.fsx load-gtk.fsx rm load-gtk1.fsx rm load-gtk2.fsx rm load-gtk3.fsx rm load-gtk4.fsx mv load-gtk.fsx $FSHARPDIR/load-gtk.fsx # Generate 'fsharpc' and 'fsharpi' scripts (using the F# path) # 'fsharpi' automatically searches F# root directory (e.g. load-gtk) echo "#!/bin/sh" fsharpc echo "exec mono $FSHARPDIR/fsc.exe --resident \"\$@\"" fsharpc chmod 755 fsharpc echo "#!/bin/sh" fsharpi echo "exec mono $FSHARPDIR/fsi.exe -I:\"$FSHARPDIR\" \"\$@\"" fsharpi chmod 755 fsharpi mv fsharpc $BIN/fsharpc mv fsharpi $BIN/fsharpi Thanks a lot!

  Read the article

• Wireless Problem on Acer Aspire 5610z

  - by Ugur Can Yalaki

  I installed ubuntu 12.04 on my machine, but I can't get wireless connection to work. My computer is Acer Aspire 5610z. I found that some other people that have same computer, face the same problem. Here is some information about it: ****** info trace ****** * uname -a * Linux ucy-Aspire-5610Z 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux * lsb_release * Distributor ID: Ubuntu Description: Ubuntu 12.04.3 LTS Release: 12.04 Codename: precise * lspci * 05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) Subsystem: AMBIT Microsystem Corp. Device [1468:0422] Kernel driver in use: b43-pci-bridge 06:01.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02) Subsystem: Acer Incorporated [ALI] Device [1025:0090] Kernel driver in use: b44 * lsusb * Bus 001 Device 004: ID 04e8:6863 Samsung Electronics Co., Ltd Bus 001 Device 002: ID 5986:0100 Acer, Inc Orbicam Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub * PCMCIA Card Info * PRODID_1="" PRODID_2="" PRODID_3="" PRODID_4="" MANFID=0000,0000 FUNCID=255 * iwconfig * * rfkill * 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no * lsmod * ssb_hcd 12781 0 ssb 51554 2 ssb_hcd,b44 * nm-tool * NetworkManager Tool State: connected (global) Device: usb0 [Wired connection 2] ------------------------------------------- Type: Wired Driver: rndis_host State: connected Default: yes HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: on IPv4 Settings: Address: 192.168.42.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.42.129 DNS: 192.168.42.129 IPv6 Settings: Address: ::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 Address: fe80::a05d:a1ff:fea4:1738 Prefix: 64 Gateway: fe80::504d:76ff:fe86:db04 DNS: fe80::504d:76ff:fe86:db04 Device: eth2 ----------------------------------------------------------------- Type: Wired Driver: b44 State: unavailable Default: no HW Address: Capabilities: Carrier Detect: yes Wired Properties Carrier: off * NetworkManager.state * [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true * NetworkManager.conf * [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false * interfaces * auto lo iface lo inet loopback * iwlist * * resolv.conf * nameserver 127.0.0.1 * blacklist * [/etc/modprobe.d/blacklist-ath_pci.conf] blacklist ath_pci [/etc/modprobe.d/blacklist-bcm43.conf] blacklist b43 blacklist b43legacy blacklist ssb blacklist bcm43xx blacklist brcm80211 blacklist brcmfmac blacklist brcmsmac blacklist bcma [/etc/modprobe.d/blacklist.conf] blacklist evbug blacklist usbmouse blacklist usbkbd blacklist eepro100 blacklist de4x5 blacklist eth1394 blacklist snd_intel8x0m blacklist snd_aw2 blacklist i2c_i801 blacklist prism54 blacklist bcm43xx blacklist garmin_gps blacklist asus_acpi blacklist snd_pcsp blacklist pcspkr blacklist amd76x_edac * modinfo * filename: /lib/modules/3.8.0-32-generic/kernel/drivers/usb/host/ssb-hcd.ko license: GPL description: Common USB driver for SSB Bus author: Hauke Mehrtens srcversion: E127A51EDC8F44D2C2A8F15 alias: ssb:v4243id0819rev* alias: ssb:v4243id0817rev* alias: ssb:v4243id0808rev* depends: ssb intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 filename: /lib/modules/3.8.0-32-generic/kernel/drivers/ssb/ssb.ko license: GPL description: Sonics Silicon Backplane driver srcversion: 14621F6EC014F731244437C alias: pci:v000014E4d00004350sv*sd*bc*sc*i* alias: pci:v000014E4d0000432Csv*sd*bc*sc*i* alias: pci:v000014E4d0000432Bsv*sd*bc*sc*i* alias: pci:v000014E4d00004329sv*sd*bc*sc*i* alias: pci:v000014E4d00004328sv*sd*bc*sc*i* alias: pci:v000014E4d00004325sv*sd*bc*sc*i* alias: pci:v000014E4d00004324sv*sd*bc*sc*i* alias: pci:v000014E4d0000A8D6sv*sd*bc*sc*i* alias: pci:v000014E4d00004322sv*sd*bc*sc*i* alias: pci:v000014E4d00004321sv*sd*bc*sc*i* alias: pci:v000014E4d00004320sv*sd*bc*sc*i* alias: pci:v000014E4d00004319sv*sd*bc*sc*i* alias: pci:v000014A4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004318sv*sd*bc*sc*i* alias: pci:v000014E4d00004315sv*sd*bc*sc*i* alias: pci:v000014E4d00004312sv*sd*bc*sc*i* alias: pci:v000014E4d00004311sv*sd*bc*sc*i* alias: pci:v000014E4d00004307sv*sd*bc*sc*i* alias: pci:v000014E4d00004306sv*sd*bc*sc*i* alias: pci:v000014E4d00004301sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-32-generic SMP mod_unload modversions 686 * udev rules * PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb1:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb2:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" PCI device 0x14e4:/sys/devices/pci0000:00/0000:00:1e.0/0000:06:01.0/ssb3:0 (b44) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" * dmesg * [ 2.385241] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00 [ 2.385256] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243) [ 2.385266] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243) [ 2.385276] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243) [ 2.385286] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243) [ 2.448147] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0 [ 2.468112] ssb: Found chip with id 0x4401, rev 0x02 and package 0x00 [ 2.468124] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 2.468132] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 2.468140] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 2.508230] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0 [ 2.528620] b44 ssb1:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver ******** done ******** Thank you already for your help.

  Read the article

• C++ problem with assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• Problem with ebay AddItem API call [migrated]

  - by user1323572

  I am totally new to any sort of API application. Right now I am creating a listing application to list items on E-bay India site. API version being used is 767, sandbox url is https://api.sandbox.ebay.com/wsapi. I have sandbox account for ebay(buyer/seller) and developer account. I am getting error saying: 1) Sales Tax / VAT was dropped from the listing as per new sales tax / VAT policy. The items will be listed successfully, you may revise the listing to specify all inclusive price. 2) You have either not registered or are having problem with your payment method registration. ItemType type = new ItemType(); type.PaymentMethods = new BuyerPaymentMethodCodeTypeCollection(); type.PaymentMethods.Add(BuyerPaymentMethodCodeType.PaisaPayAccepted); Also do I have to specify taxation for each state? For VAT and shipping details here's my snippet: private ShippingDetailsType getShippingDetails() { // Shipping details. ShippingDetailsType sd = new ShippingDetailsType(); SalesTaxType salesTax = new SalesTaxType(); ReadSettings rs = new ReadSettings(); rs.GetSettings(); salesTax.SalesTaxPercent = 12f; salesTax.SalesTaxState = "MH"; SalesTaxType s = new SalesTaxType(); salesTax.ShippingIncludedInTax = true; salesTax.ShippingIncludedInTaxSpecified = true; sd.ApplyShippingDiscount = true; AmountType at = new AmountType(); at.Value = 2.8; at.currencyID = CurrencyCodeType.INR; sd.InsuranceFee = at; sd.InsuranceOption = InsuranceOptionCodeType.NotOffered; sd.PaymentInstructions = "These are my instructions."; VATDetailsType vd = new VATDetailsType(); vd.BusinessSeller = false; vd.BusinessSellerSpecified = false; vd.RestrictedToBusiness = false; vd.RestrictedToBusinessSpecified = false; vd.VATID = "VATSNO1234567890"; vd.VATPercent = 12f; vd.VATPercentSpecified = true; vd.VATSite = "None"; sd.ShippingType = ShippingTypeCodeType.Flat; // ShippingServiceOptionsType st1 = new ShippingServiceOptionsType(); sd.SalesTax = salesTax; st1.ShippingService = ShippingServiceCodeType.IN_Express.ToString(); at = new AmountType(); at.Value = 50; at.currencyID = CurrencyCodeType.INR; st1.ShippingServiceAdditionalCost = at; at = new AmountType(); at.Value = 50; at.currencyID = CurrencyCodeType.INR; st1.ShippingServiceCost = at; st1.ShippingServicePriority = 1; at = new AmountType(); at.Value = 1.0; at.currencyID = CurrencyCodeType.INR; st1.ShippingInsuranceCost = at; sd.ShippingServiceOptions = new ShippingServiceOptionsTypeCollection(new ShippingServiceOptionsType[] { st1 }); return sd; } Thank you for you efforts.

  Read the article

• Problem with Assimp 3D model loader

  - by Brendan Webster

  In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

  Read the article

• Dell 3721 Wifi problem Ubuntu 13.04

  - by Sebastian

  I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

  Read the article

• Octree subdivision problem

  - by ChaosDev

  Im creating octree manually and want function for effectively divide all nodes and their subnodes - For example - I press button and subnodes divided - press again - all subnodes divided again. Must be like - 1 - 8 - 64. The problem is - i dont understand how organize recursive loops for that. OctreeNode in my unoptimized implementation contain pointers to subnodes(childs),parent,extra vector(contains dublicates of child),generation info and lots of information for drawing. class gOctreeNode { //necessary fields gOctreeNode* FrontBottomLeftNode; gOctreeNode* FrontBottomRightNode; gOctreeNode* FrontTopLeftNode; gOctreeNode* FrontTopRightNode; gOctreeNode* BackBottomLeftNode; gOctreeNode* BackBottomRightNode; gOctreeNode* BackTopLeftNode; gOctreeNode* BackTopRightNode; gOctreeNode* mParentNode; std::vector<gOctreeNode*> m_ChildsVector; UINT mGeneration; bool mSplitted; bool isSplitted(){return m_Splitted;} .... //unnecessary fields }; DivideNode of Octree class fill these fields, set mSplitted to true, and prepare for correctly drawing. Octree contains basic nodes(m_nodes). Basic node can be divided, but now I want recursivly divide already divided basic node with 8 subnodes. So I write this function. void DivideAllChildCells(int ix,int ih,int id) { std::vector<gOctreeNode*> nlist; std::vector<gOctreeNode*> dlist; int index = (ix * m_Height * m_Depth) + (ih * m_Depth) + (id * 1);//get index of specified node gOctreeNode* baseNode = m_nodes[index].get(); nlist.push_back(baseNode->FrontTopLeftNode); nlist.push_back(baseNode->FrontTopRightNode); nlist.push_back(baseNode->FrontBottomLeftNode); nlist.push_back(baseNode->FrontBottomRightNode); nlist.push_back(baseNode->BackBottomLeftNode); nlist.push_back(baseNode->BackBottomRightNode); nlist.push_back(baseNode->BackTopLeftNode); nlist.push_back(baseNode->BackTopRightNode); bool cont = true; UINT d = 0;//additional recursive loop param (?) UINT g = 0;//additional recursive loop param (?) LoopNodes(d,g,nlist,dlist); //Divide resulting nodes for(UINT i = 0; i < dlist.size(); i++) { DivideNode(dlist[i]); } } And now, back to the main question,I present LoopNodes, which must do all work for giving dlist nodes for splitting. void LoopNodes(UINT& od,UINT& og,std::vector<gOctreeNode*>& nlist,std::vector<gOctreeNode*>& dnodes) { //od++;//recursion depth bool f = false; //pass through childs for(UINT i = 0; i < 8; i++) { if(nlist[i]->isSplitted())//if node splitted and have childs { //pass forward through tree for(UINT j = 0; j < 8; j++) { nlist[j] = nlist[j]->m_ChildsVector[j];//set pointers to these childs } LoopNodes(od,og,nlist,dnodes); } else //if no childs { //add to split vector dnodes.push_back(nlist[i]); } } } This version of loop nodes works correctly for 2(or 1?) generations after - this will not divide neightbours nodes, only some corners. I need correct algorithm. Screenshot All I need - is correct version of LoopNodes, which can add all nodes for DivideNode.

  Read the article

• OpenGl / C++ and some strange light problem on half board

  - by mlodziaszka

  I have some problem with lights in my opengl "game". I have board with is square (-50,50), (50, 50), (50, -50), (-50,-50) x and z since y doesn't matter at all. I tried to make something like flashlight its moving and rotating with camera (me), but when i try to rotate more then 90 degree to left or right it just give diffrend light: http://imageshack.us/photo/my-images/688/lightij.jpg/ (left is spotlight, right point light) There is also a point light in the middle, but its working strange(not like a pointlight) it shines only on half of the board from (-50,50), (50, 50), (50, 0), (-50,-0) x and y: Link to my repo where u can find game exe in download and full code in source: https://bitbucket.org/mlodziaszka/my_game All more fragments of light: float gl_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; glLightModelfv(GL_LIGHT_MODEL_AMBIENT, gl_amb); glEnable(GL_LIGHTING); // Wlaczenie oswietlenia glShadeModel(GL_SMOOTH); // Wybor techniki cieniowania glEnable(GL_LIGHT0); // Wlaczenie 0-go zrodla swiatla glEnable(GL_LIGHT1); Cubes parametri: float m1_amb[] = { 1.0f, 0.0f, 0.0f, 1.0f }; float m1_dif[] = { 1.0f, 0.0f, 0.0f, 1.0f }; float m1_spe[] = { 1.0f, 0.0f, 0.0f, 1.0f }; glMaterialfv(GL_FRONT, GL_AMBIENT, m1_amb); glMaterialfv(GL_FRONT, GL_DIFFUSE, m1_dif); glMaterialfv(GL_FRONT, GL_SPECULAR, m1_spe); glMaterialf(GL_FRONT, GL_SHININESS, 50.0f); Texture parametri: float m1_amb[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float m1_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float m1_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; glMaterialfv(GL_FRONT, GL_AMBIENT, m1_amb); glMaterialfv(GL_FRONT, GL_DIFFUSE, m1_dif); glMaterialfv(GL_FRONT, GL_SPECULAR, m1_spe); glMaterialf(GL_FRONT, GL_SHININESS, 0.0f); glTexEnvf( GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE ); Light0: //with some magic sn't working anyway float l0_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; float l0_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l0_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l0_pos[] = { g_Camera.m_vPosition.x, g_Camera.m_vPosition.y, g_Camera.m_vPosition.z, 1.0f }; float temp = 0.0f, temp2 = 0.0f, temp3 = 0.0f; if(g_Camera.m_vView.z < g_Camera.m_vPosition.z) { temp = g_Camera.m_vView.x - g_Camera.m_vPosition.x; temp2 = g_Camera.m_vView.z - g_Camera.m_vPosition.z; } else { temp = g_Camera.m_vView.x - g_Camera.m_vPosition.x; temp2 = g_Camera.m_vView.z - g_Camera.m_vPosition.z; } float l0_pos1[] = {temp, 0.0f, temp2}; //float l0_pos1[] = {-1.0f, 0.0f, -1.0f}; glLightfv(GL_LIGHT0, GL_AMBIENT, l0_amb); glLightfv(GL_LIGHT0, GL_DIFFUSE, l0_dif); glLightfv(GL_LIGHT0, GL_SPECULAR, l0_spe); glLightfv(GL_LIGHT0, GL_POSITION, l0_pos); glLightf (GL_LIGHT0, GL_SPOT_CUTOFF, 15.0f); glLightfv(GL_LIGHT0, GL_SPOT_DIRECTION, l0_pos1); Light1: float l1_amb[] = { 0.2f, 0.2f, 0.2f, 1.0f }; float l1_dif[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l1_spe[] = { 1.0f, 1.0f, 1.0f, 1.0f }; float l1_pos[] = { 0.0f, 0.0f, 0.0f, 1.0f }; glLightfv(GL_LIGHT1, GL_AMBIENT, l1_amb); glLightfv(GL_LIGHT1, GL_DIFFUSE, l1_dif); glLightfv(GL_LIGHT1, GL_SPECULAR, l1_spe); glLightfv(GL_LIGHT1, GL_POSITION, l1_pos); I know that way I made this very old, but for now i want to keep this like that. I wouldbe realy gratefull if someone can tell me what is wrong with my lights xD full code: link up ^^

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >