Search Results

Search found 11221 results on 449 pages for 'pure virtual'.

Page 31/449 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Virtual Disk Degraded

  - by TheD

  There is a physical DC with a Raid 1 Mirror, 2 Physical Disks, 500GB each. Dell Server Administrator is installed on the DC, and is reporting both physical disks are fine, online, in a good state etc. On a PERC S300 Raid Controller: Physical Disk 0:0 Physical Disk 0:1 However at the same time it's reporting that a virtual disk is degraded, what exactly does this mean? The virtual disk indicates it's State is in a Raid 1 Layout. Device Name: Windows Disk 0 If my understanding is correct then the Virtual Disk, when you drill down into Dell OpenManage should have both physical disks as members, as it is a mirror? Is this correct? However, when I drill down into the Virtual Disk, it only displays Physical Disk 0:0 included in Virtual Disk 1. I'm very new to server side/raid management etc. just while our server techy is away! Thanks!

  Read the article

• Virtual Windows desktop

  - by Zack

  Is there any virtual desktop software that can virtualize desktop just like a virtual desktop to sandbox (sort of like virtualization and sandbox combined). I want to create many desktop and each of them must be sandbox. For example if I have virus infected in one of the desktop, I just have to clear or close the desktop and everything is fine. Is there any software that can do that kind of jobs that I have mentioned? Remember I am not asking recommendation of software, but the software that can do the job. UPDATE: I mean that every virtual desktop is working as a virtual box or sandbox. Clearing or closing the desktop will work as shutting down that virtual box.

  Read the article

• One bigger Virtual Machine distributed across many OpenStack nodes [duplicate]

  - by flyer

  This question already has an answer here: Can a virtualized machine have the CPU and RAM resources of multiple underlying physical machines? 2 answers I just setup virtual machines on one hardware with Vagrant. I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with Linux? ------------------------------- | VM with OS | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | Node | Node | Node | ------------------------------- More details: In my environment Nodes are just virtual machines, but my question concerns separate Hardware nodes. If we imagine this Nodes(Novas) are placed on a separate machines (e.g. every has 4 cores) can I run one Virtual Machine across many OpenStack Nodes? Is it possible to aggregate the computation power of OpenStack in one virtual distributed operating system?

  Read the article

• URL redirect to a virtual server on a VLAN

  - by zeroFiG

  I have a production site, running off 10 servers. I've been given another virtual server on the same network as these 10 servers, to use for testing purposes. This server doesn't have it's own DNS entry. Therefore I need to do a redirect to the site hosted on this virtual server for a sub-domain of the site running on the 10 other servers. So Basically I was wondering how I would configure a sub domain of my production server to point at the Virtual server for testing. I'm guessing I need to modify my site file in /etc/apache2/sites-available and add another virtual host like the following and modify the redirect match: <VirtualHost *> ServerName SUBDOMAIN.DOMAIN.com RedirectMatch 301 (.*) **IP ADDRESS** CustomLog /var/log/apache2/SUBDOMAIN.DOMAIN.com.access.log combined </VirtualHost> Do I set the redirect match to just the IP on the Virtual server, and then configure another site file in the sites-available directory, which will recption this redirect and point the browser towards the HTML root? Thanks, I hope I made myself clear.

  Read the article

• virtual box strectch to fit resolution

  - by Scarface

  Hey guys I have a really annoying problem, that I hope someone has figured out. I just installed ubuntu on virtual box and installed the guest additions so everything was great. I had a resolution that stretched across my screen from left to right and the only virtual box components that were visible were the windows vista title bar : minimize/exit/maximize buttons and virtual box controls at the bottom. Now all of a sudden now that I have installed the ubuntu 170mb of automatic updates, I see vertical and horizontal scroll bars that are part of virtual box and the ubuntu resolution will not stretch across my screen anymore. What I want is a ubuntu resolution that will stretch to fit the maximized window of virtual box, and remove the scroll bars. If anyone has any ideas, I would really appreciate it.

  Read the article

• non-mapped virtual memory & total number of connections

  - by tszming

  We have two MongoDB data nodes (replica set) - Primary & Secondary. I noticed that the non-mapped virtual memory is relatively high and wondering if they are hurting our MongoDB performance (The server usually peaked at around 6-7K queries per sec). In MMS, it was stated: "The most common case of usage of a high amount of memory for non-mapped is that there are very many connections to the database." So we checked the memory usage with db.serverStatus().mem in our Secondary: { "bits" : 64, "resident" : 6846, "virtual" : 416797, "supported" : true, "mapped" : 205549, "mappedWithJournal" : 411098, "note" : "virtual minus mapped is large. could indicate a memory leak" } Note: We are using 2.0.4 and now the default stack size should be 1MB per connection. The current number of connections is around 1.1K, but the non-mapped virtual memory (virtual-mappedWithJournal) is around 5699 MB. The trend is quite stable so I can't say there is a leak here, but where is the memory gone? Any idea?

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

  - by Graphics Noob

  So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

  Read the article

• spring.net proxy factory with target type needs property virtual ?

  - by Vince

  Hi all, I'm creating spring.net proxy in code by using ProxyFactory object with ProxyTargetType to true to have a proxy on a non interfaced complex object. Proxying seems ok till i call a method on that object. The method references a public property and if this property is not virtual it's value is null. This doesn't happen if i use Spring.Aop.Framework.AutoProxy.InheritanceBasedAopConfigurer in spring config file but in this case i can't use this because spring context doesn't own this object. Is this normal to have such behavior or is there a tweak to perform what i want (proxying object virtual method without having to change properties virtual)? Note that i tried factory.AutoDetectInterfaces and factory.ProxyTargetAttributes values but doesn't help. My proxy creation code: public static T CreateMethodCallStatProxy<T>() { // Proxy factory ProxyFactory factory = new ProxyFactory(); factory.AddAdvice(new CallMonitorTrackerAdvice()); factory.ProxyTargetType = true; // Create instance factory.Target = Activator.CreateInstance<T>(); // Get proxy T proxiedClass = (T)factory.GetProxy(); return proxiedClass; } Thanks for your help

  Read the article

• VMware virtual machine network devices malfunctioning

  - by sheepz

  I'm running Ubuntu 10.04 LTS and VMvware workstation 7.0.1 build-227600. The virtual machine i'm running in VMware is a custom distribution built on Debian Linux version 3.1. I'm still pretty much a beginner with UNIX administration. After having messed around with the vmware (changed only the name of the folder, the vmx and and other .v* files accordingly in which the .vmx was situated, and the configuration in the vmx file accordingly), the network devices on the virtual machine do not work anymore. The virtual machine is used for securely sending messages. The virtual machine: As far as I know, this perl file called proxy-gen-ifalias eth0 is responsible for properly setting up the two virtual network devices eth0 and eth1. The Virtual machine comes with a GUI interface in which I have set up two ethernet network devices, one internal, the other external. Now, after having messed around with this, the UI gives me this error message: perl proxy-gen-ifalias eth0 /etc/modprobe.d/alias-eth0 /sbin/update-modules perl proxy-gen-ifalias eth1 /etc/modprobe.d/alias-eth1 /sbin/update-modules ifdown eth0 ifdown: interface eth0 not configured ifdown eth1 ifdown: interface eth1 not configured perl proxy-gen-netcfg /etc/network/interfaces ifup eth0 SICCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device eth0: ERROR while getting interface flags: No such device Failed to bring up eth0. ifconfig eth0 eth0: error fetching interface information: Device not found make: *** [/etc/network/interfaces] Error 1 ~ Here are the contents of the two perl files referred to in the message: paste.pocoo.org/show/2AMzAYhoCRZqlGY7wUFk/ proxy-gen-netcfg

  Read the article

• Virtual host config issues in osx 10.7 server app

  - by Benno

  I have two mac mini lion servers setup to run as production and staging machines. My sysadmin decided on these machines over the previous CentOS we had because it had an "interface" to be able to manage it, rather than just the terminal. To be honest, I prefer the terminal. My problem is, the mac osx 10.7 server.app seems to be having issues with the creation of virtual hosts in the 'Web' section. It seems VERY touchy. For example, I cannot create a http virtual host first. I have to create a https host first with a unique dns name 9e..g vuly6), then create the http host with a different dns name to the first (e.g. www), or it appears to override it the first one, even though one is ssl and one is non-ssl. Further, it seems to override perfectly good configurations at random. For example, the default sites directory is usually /Users/default/Sites/Customsites or something, but sometimes when I load the server.app it changes to /var/empty. Also, if I change or add extra virtual hosts after the first one or two, it starts to mess up and the first two virtual hosts start having issues. Has anyone had any experience with setting up virtual hosts via this app? Am I able to manually create these virtual hosts, without using the app, and without the app overriding my settings when I restart apache?

  Read the article

• How to find the real IP to which IPVS is routing a virtual IP

  - by Wayne Conrad

  I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

  Read the article

• Keepalived for more than 20 virtual addresses

  - by cvaldemar

  I have set up keepalived on two Debian machines for high availability, but I've run into the maximum number of virtual IP's I can assign to my vrrp_instance. How would I go about configuring and failing over 20+ virtual IP's? This is the, very simple, setup: LB01: 10.200.85.1 LB02: 10.200.85.2 Virtual IPs: 10.200.85.100 - 10.200.85.200 Each machine is also running Apache (later Nginx) binding on the virtual IPs for SSL client certificate termination and proxying to backend webservers. The reason I need so many VIP's is the inability to use VirtualHost on HTTPS. This is my keepalived.conf: vrrp_script chk_apache2 { script "killall -0 apache2" interval 2 weight 2 } vrrp_instance VI_1 { interface eth0 state MASTER virtual_router_id 51 priority 101 virtual_ipaddress { 10.200.85.100 . . all the way to . 10.200.85.200 } An identical configuration is on the BACKUP machine, and it's working fine, but only up to the 20th IP. I have found a HOWTO discussing this problem. Basically, they suggest having just one VIP and routing all traffic "via" this one IP, and "all will be well". Is this a good approach? I'm running pfSense firewalls in front of the machines. Quote from the above link: ip route add $VNET/N via $VIP or route add $VNET netmask w.x.y.z gw $VIP Thanks in advance. EDIT: @David Schwartz said it would make sense to add a route, so I tried adding a static route to the pfSense firewall, but that didn't work as I expected it would. pfSense route: Interface: LAN Destination network: 10.200.85.200/32 (virtual IP) Gateway: 10.200.85.100 (floating virtual IP) Description: Route to VIP .100 I also made sure I had packet forwarding enabled on my hosts: $ cat /etc/sysctl.conf net.ipv4.ip_forward=1 net.ipv4.ip_nonlocal_bind=1 Am I doing this wrong? I also removed all VIPs from the keepalived.conf so it only fails over 10.200.85.100.

  Read the article

• How to place a virtual machine in DMZ?

  - by Giordano

  I have an Ubuntu 12.04 server running few virtual machines with KVM. I would like to expose some of these virtual machines on the internet, to make it possible for customers to test the products we're developing and make available other products for demo purposes. One of the server NICs is configured with a public IP. However before exposing anything on the web I would like to be sure that if one of the virtual machines get compromised, the attacker doesn't reach the rest of the hosts. What I would like to do is to put these virtual machines into a DMZ. These are the steps I'm planning to do: Create a tap interface in the virtualization host (let's say tap1) Create a bridge using tap1 and give it an IP in a subnet separate from the other hosts. Let's say 10.0.0.1 Attach the DMZ virtual machines to the bridge and configure their IP statically (10.0.0.2, 10.0.0.3, etc...) Using UFW, forbid any traffic from 10.0.0.0/24 to any of the internal hosts, allow the traffic from the internal hosts towards 10.0.0.0/24 and expose the virtual machines on the web using port forwarding. Do you think this setup is safe? Can you suggest any improvement or a better/safer approach? Thanks in advance!

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• Running Mixed Physical and Virtual Exalogic Elastic Cloud Software Versions in an Exalogic Rack is now Supported

  - by csoto

  Although it was not supported on older versions, now as of EECS 2.0.6, an Exalogic rack can be configured in a mixed-mode: half virtual and half physical Linux: Flexibility to have physical and virtual environments on same rack. For example, production on physical and test/dev on virtual. Exalogic Control manages the virtual compute nodes on the rack. Physical compute nodes are managed manually (including PKeys). Option to change full physical to hybrid and hybrid to full virtual rack. User has an option to choose either the top or bottom nodes for physical or virtual deployment. For further information about how the compute nodes can be split up on the rack (into bottom or top half) to run either Oracle Virtual Server (OVS "hypervisor") or Oracle Linux, please take a look at MOS Note 1536945.1. Note: Solaris is not yet supported in the mixed configuration.

  Read the article

• Moving windows-2003 hdd into virtual machine - with HDD shrink

  - by jm666

  Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

  Read the article

• How to create a snapshot volume to a remote server using kvm?

  - by Purres

  I want to backup a few virtual machines to a backup server. Here're the backup steps. suspend a virtual machine create a snapshot of the virtual machine using lvcreate -s resume a virtual machine dd if=/virtual_machine_path | lzop > /temp/backup.lzo rsync /temp/backup.lzo -e "ssh " 1.2.3.4:/backup_path/ However, the hypervisor server doesn't have enough hard disk space to create a snapshot in step 2. Is there a way to create a logical volume snapshot to a remote server?

  Read the article

• virtual machines: optimal host os to run Windows XP guest os?

  - by user61132

  My department doesn't have the budget to upgrade my ailing Dell D620 laptop. However, I do have the option to buy my own personal computer, then use my company-issued ISO image to run Windows XP as my guest os using virtualbox or vmware. Therefore, last month, I bought an Acer AX3910-U3012 desktop that had Windows 7 as the host os (and 8G RAM). In short, I was disappointed with the performance while trying to run WinXP as the guest os. (It didn't perform much better than my laptop.) Just wondering what the optimal host os would be for running Windows XP as the guest os? (No, I can't use my company-issued ISO image to build the os for my personal computer.) FWIW, I'm willing to spend up to $2k if it's REALLY worth it, but would prefer to spend no more than $1k. Also, in an effort to cut costs, I'd prefer buy a desktop instead of a laptop. Thanks for any/all feedback.

  Read the article

• How can I run the same Linux Installation on my hardware and in a virtual machine?

  - by LithMaster

  I've started some development that requires Linux (I'm currently on Ubuntu, but I may switch to Debian), but I still use Windows 7 for my day-to-day computing. I have already tried a dual-boot setup, but I've found that it is too cumbersome to switch between Linux and Windows. I'm wondering if it's possible to setup an installation of Linux (again, Ubuntu or Debian) on a partition of my hard drive that I can also run from Windows in a virtualized environment.

  Read the article

• Create netbook recovery image without DVD burner (virtual burner?)

  - by Dan

  I have a new Acer Aspire One which is asking to create a recovery DVD. It doesn't have a built in burner, and I don't have a USB burner. However I do have a large USB hard drive. Is there some way to get the recovery software to "burn" an image file instead of a real DVD? I know you can download a Linux recovery image, but the netbook comes with XP. I plan to install Linux on it but I'd like an XP recovery image just in case.

  Read the article

• Is it save to run cracked program (having worm, virus, ...) on Virtual PC ?

  - by Nam Gi VU

  I'm not sure if it is save, please help!

  Read the article

• How to create a snapshot volume to a remote server?

  - by Purres

  I want to backup a few virtual machines to a backup server. Here're the backup steps. suspend a virtual machine create a snapshot of the virtual machine using lvcreate -s resume a virtual machine dd if=/virtual_machine_path | lzop > /temp/backup.lzo rsync /temp/backup.lzo -e "ssh " 1.2.3.4:/backup_path/ However, the hypervisor server doesn't have enough hard disk space to create a snapshot in step 2. Is there a way to create a logical volume snapshot to a remote server?

  Read the article

• How Can I assign an IP address to my virtual Windows Server, so that I can start using it almost as a VPS?

  - by Nelson Symonds

  We are a small office set up with two PC's out of which one of my PCs runs 24hrs. Its almost equivalent to a small server, but right now we're in need of a server which is why I am planning to keep my machine as well as a server into a single PC. I've used VMware Workstation to create a powerful Windows Server 2008 within my PC and I want to attach it to my Network Switch through the same PC where I am hosting it. I want to use it almost like a physical server with an IP address and everything so that I can connect from one Pc to the Server directly or my applications can connect to Server straight with the IP address. How should I do this? Step by step instructions would be appreciated. Thanks in Advance, Best regards Nelson

  Read the article

• Postfix to deliver mail to a virtual address mailbox

  - by Chloe

  Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >