Search Results

Search found 4740 results on 190 pages for 'split mirror'.

Page 31/190 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

  • How do I replace a harddrive that is in a two-way mirror storage space on Windows 8?

    - by Jon
    I have a storage space in Windows 8 doing a two-way mirror on three harddrives. The sizes are 297GB, 189GB, and 70GB. I would like to replace the 70GB HD with a larger one. My thought was to remove that drive from the space via the Storage Space control panel, shutdown, replace HD with bigger drive, reboot, add new HD to the storage space. I can't find any options to remove a HD from a storage space in the control panel. Should I just shutdown and swap out the small drive or is there another process for safely replacing the old HD? (By the way, the old HD is still operational.)

    Read the article

  • Is it possible to create a Mirror or Stripe volume for the boot partition in Windows 2008/R2?

    - by Georgios
    Hello, I have a server with two identical disks and I have installed Windows Server 2008 R2 on C, which is a 60GB volume on Disk 0. Using the disk manager, I have attempted to create both a Mirror and Stripe volume in Disk 1 but every time I get the same error "No extents found in the plex". This error occurs after Windows has converted both disks to Dynamic. The fact that the manager allows me to attempt to do this would point to the fact that this is possible. However I have been unable to find any solutions to this error. Any ideas on how to solve this? Thanks Georgios

    Read the article

  • How to take backup mirror copies of C: drive?

    - by metal gear solid
    I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

    Read the article

  • Prolog: using the sort/2 predicate

    - by Øyvind Hauge
    So I'm trying to get rid of the wrapper clause by using the sort library predicate directly inside split. What split does is just generating a list of numbers from a list that looks like this: [1:2,3:2,4:6] ---split-- [1,2,3,2,4,6]. But the generated list contains duplicates, and I don't want that, so I'm using the wrapper to combine split and sort, which then generates the desired result: [1,2,3,4,6]. I'd really like to get rid of the wrapper and just use sort within split, however I keep getting "ERROR: sort/2: Arguments are not sufficiently instantiated." Any ideas? Thanks :) split([],[]). split([H1:H2|T],[H1,H2|NT]) :- split(T,NT). wrapper(L,Processed) :- split(L,L2), sort(L2,Processed).

    Read the article

  • Why can't I get out of display mirror mode?

    - by Roy Smith
    I've been running Ubuntu (10.04.1 LTS, 64-bit) for a while and just replaced my hardware with a faster machine with an ATI Radeon HD 5700 video card. I've got twin 1920 x 1080 displays. I downloaded the latest driver (ati-driver-installer-10-9-x86.x86_64.run) from the ATI web site and installed that. I've gone through a few rounds of playing with /etc/X11/xorg.conf, and can't get things right. At the moment, it's in display mirroring mode, and I can't figure out how to get it out of mirror mode. If I run Monitor Preferences, there's a "Same image in all monitors" checkbox. If I uncheck that, the little preview window switches to show two monitors. When I click Apply, it asks me to log out and log back in again. When I do that, I'm right back to mirrored mode. What's really weird is that I'm currently running a copy of xorg.conf from a coworker's machine. He's got identical hardware, and his display works fine. So, I'm inclined to think there's something else going on other than the conf file. Any ideas what might be wrong?

    Read the article

  • How to fix error with "class" when creating a dhcp split-scope on Windows 2008?

    - by Jonas Stensved
    I'm trying to split a dhcp scope between a existing domain controller TTP01 and the new DC TTP02 to provide failover. I'm using the the wizard in DHCP [my scope] Advanced Split-scope. In the final step I get an error saying: Migration of Scope Options on Added DHCP Server: Failed Error: 0x00004E4C - The class name being used is unknown or incorrect. I can't find anything that seems to be wrong with my Scope Options settings, they are: Option Name Vendor Value Class 003 Router Standard 192.168.137.1 None 006 DNS Server Standard 192.168.137.2 None 015 DNS Domain Name Standard ttp.local None 060 PXEClient Standard PXEClient None I can't find any information about this error except this msdn article when searching. How do make it work?

    Read the article

  • yum install php-tidy - no more mirrors

    - by Lylo
    Hi im trying to get the tidy extensions installed on centos running php 5.3 Thanks Downloading Packages: http://repo.webtatic.com/yum/centos/5/x86_64/php-tidy-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-pdo-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-mysql-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-gd-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-xml-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-common-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-devel-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. http://repo.webtatic.com/yum/centos/5/x86_64/php-cli-5.3.5-1.w5.x86_64.rpm: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error Downloading Packages: php-tidy-5.3.5-1.w5.x86_64: failure: php-tidy-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-cli-5.3.5-1.w5.x86_64: failure: php-cli-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-5.3.5-1.w5.x86_64: failure: php-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-pdo-5.3.5-1.w5.x86_64: failure: php-pdo-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-devel-5.3.5-1.w5.x86_64: failure: php-devel-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-mysql-5.3.5-1.w5.x86_64: failure: php-mysql-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-common-5.3.5-1.w5.x86_64: failure: php-common-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-xml-5.3.5-1.w5.x86_64: failure: php-xml-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try. php-gd-5.3.5-1.w5.x86_64: failure: php-gd-5.3.5-1.w5.x86_64.rpm from webtatic: [Errno 256] No more mirrors to try.

    Read the article

  • Solaris10 x86 mirror. Making second disk booteable when failure

    - by Kani
    Did a mirror (RAID1) with Solaris 10 in x86. Everything OK. Now, I´m trying to make the second disk booteable, this is: from grub or in case of failure of disk1. I edited /boot/grub/menu.lst: #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris 10 9/10 s10x_u9wos_14a X86 findroot (rootfs1,0,a) kernel /platform/i86pc/multiboot module /platform/i86pc/boot_archive #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot -s module /boot/amd64/x86.miniroot-safe #---------------------END BOOTADM-------------------- #---------- ADDED BY BOOTADM - DO NOT EDIT ---------- title Solaris failsafe findroot (rootfs1,0,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe #---------------------END BOOTADM-------------------- #Make second disk booteable!!!!!!! title alternate boot findroot (rootfs1,1,a) kernel /boot/multiboot kernel/unix -s module /boot/x86.miniroot-safe But is not working. In the BIOS, when I select "alternate boot" I get: Error 15: 15 file not found also, how to configure to GRUB to make the disk2 to boot in case of error in disk1? Additionally, I did (but not related to GRUB): eeprom altbootpath=/devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a Here is the output of some commands that may help you: /sbin/biosdev 0x80 /pci@0,0/pci108e,5352@1f,2/disk@0,0 0x81 /pci@0,0/pci108e,5352@1f,2/disk@1,0 ls -l /dev/dsk/c1t?d0s0 lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t0d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@0,0:a lrwxrwxrwx 1 root root 50 Jul 7 12:01 /dev/dsk/c1t1d0s0 -> ../../devices/pci@0,0/pci108e,5352@1f,2/disk@1,0:a more /boot/solaris/bootenv.rc setprop ata-dma-enabled '1' setprop atapi-cd-dma-enabled '0' setprop ttyb-rts-dtr-off 'false' setprop ttyb-ignore-cd 'true' setprop ttya-rts-dtr-off 'false' setprop ttya-ignore-cd 'true' setprop ttyb-mode '9600,8,n,1,-' setprop ttya-mode '9600,8,n,1,-' setprop lba-access-ok '1' setprop prealloc-chunk-size '0x2000' setprop bootpath '/pci@0,0/pci108e,5352@1f,2/disk@0,0:a' setprop keyboard-layout 'US-English' setprop console 'text' setprop altbootpath '/pci@0,0/pci108e,5352@1f,2/disk@1,0:a' cat /etc/vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - #/dev/dsk/c1t0d0s1 - - swap - no - /dev/md/dsk/d1 - - swap - no - /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /devices - /devices devfs - no - sharefs - /etc/dfs/sharetab sharefs - no - ctfs - /system/contract ctfs - no - objfs - /system/object objfs - no - swap - /tmp tmpfs - yes - df -h Filesystem size used avail capacity Mounted on /dev/md/dsk/d0 909G 11G 889G 2% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 14G 972K 14G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 909G 11G 889G 2% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 14G 40K 14G 1% /tmp swap 14G 28K 14G 1% /var/run

    Read the article

  • If I split my harddrive, will a system restore delete it?

    - by AoiHana
    I split my 1TB HD from C drive and called it A. I put some files there to back up. I have now come to a point where I need to run a system restore with the discs that came with my computer. If I do a system restore and wipe C drive clean, will I lose the part of the hard drive that I split or will it remain intact and my files uncorrupted? This is a partition I created with windows myself, and dragged files over to it. Thanks!

    Read the article

  • Drbd Primary/Primary + iSCSI: accessing to different files avoids split brain?

    - by Eddie C.
    I have a question / curiosity about split-brain on a Drbd Primary/Primary configuration. Supposing two nodes (hosts), host1 and host2 configured with Drbd Primary/Primary and two different shares (NFS, CIFS o iSCSI) of a replicated area (saying /drbd) /drbd/file1.data /drbd/file2.data If a pool of client would access only by host1 share reading and wrinting only file1.data and another pool only by host2 share to file2.data, this scenario should avoid split brain situation in case of one node failure or it's just a conjecture? The final purpose is load balance between the two nodes in normal condition and collapsing to one node only in case of failure. Thank you! Eddie

    Read the article

  • How can I split a stereo audio track of a movie into two separate audio tracks?

    - by pesche
    I often record TV shows with a hard disk recorder/DVD writer, burn them as VRO file and convert to MP4 with Handbrake. The shows are bilingual broadcasts with two mono audio channels instead of a stereo one: dubbed voice on the left, original voice on the right. The TV set and VLC are both perfectly capable to play only the left or the right channel, but other video players may just offer to select between different stereo audio tracks (like they are present on many DVDs). I'd like to have an easy process to create MP4 or MKV files of these shows where the two audio channels are split into two separate audio tracks. The only way that I know of is to extract the audio track (e.g. using MPEG Streamclip), split it into two tracks using an audio tool like Audacity and then merge the audio tracks back (using a DVD authoring software, don't remember all details). Clearly not a thing to repeat regularly. Preferably a solution should run on Mac OS X, but Linux or Windows solutions are very welcome, too.

    Read the article

  • What is the Optimal Server Configuration for Split-Path Testing?

    - by doug
    I am far from an expert on Apache or any server for that matter, so i apologize if this question is poorly worded, which it likely is. We have always relied on a vendor for split-path testing (aka "AB Testing"). If you're not familiar with that term, it's a form of marketing research in which you slightly modify one of your web pages (usually one nearest the point of conversion), say for instance, by changing the position of the "Buy Now" button or its color/contrast/texture, then serving one of those two pages to a given user based on random selection. By doing split-path testing ourselves, I suspect we can do it far more cheaply and increase cycle times as well. What is the optimal set-up for these tests? "Optimal" is based on the following criteria: how quickly/easily new tests can be set-up and put online; and minimal disruption to overall site performance

    Read the article

  • Why does my Visual Studio 2010 default to a horizontal windows split if I quit then reopen it?

    - by Martin Doms
    I use Visual Studio 2010 Professional at work and up until a couple of weeks ago I have had no problems. But now whenever I open an instance of VS 2010 it defaults to horizontal split. I never split my windows horizontally, so this is very annoying. It happens consistently, every time on every project. Here is how VS2010 looked before I closed the window: I close it and reopen in that project, and: Arg! The only plugin I use is ReSharper, in case it's relevant.

    Read the article

  • ZFS Basics

    - by user12614620
    Stage 1 basics: creating a pool # zpool create $NAME $REDUNDANCY $DISK1_0..N [$REDUNDANCY $DISK2_0..N]... $NAME = name of the pool you're creating. This will also be the name of the first filesystem and, by default, be placed at the mountpoint "/$NAME" $REDUNDANCY = either mirror or raidzN, and N can be 1, 2, or 3. If you leave N off, then it defaults to 1. $DISK1_0..N = the disks assigned to the pool. Example 1: zpool create tank mirror c4t1d0 c4t2d0 name of pool: tank redundancy: mirroring disks being mirrored: c4t1d0 and c4t2d0 Capacity: size of a single disk Example 2: zpool create tank raidz c4t1d0 c4t2d0 c4t3d0 c4t4d0 c4t5d0 Here the redundancy is raidz, and there are five disks, in a 4+1 (4 data, 1 parity) config. This means that the capacity is 4 times the disk size. If the command used "raidz2" instead, then the config would be 3+2. Likewise, "raidz3" would be a 2+3 config. Example 3: zpool create tank mirror c4t1d0 c4t2d0 mirror c4t3d0 c4t4d0 This is the same as the first mirror example, except there are two mirrors now. ZFS will stripe data across both mirrors, which means that writing data will go a bit faster. Note: you cannot create a mirror of two raidzs. You can create a raidz of mirrors, but to do that requires trickery.

    Read the article

  • How to Split a Cell Part of a Row and Keep the Rest of the Rows - Google Spreadsheets

    - by user3527095
    I am trying to do the following: I have row 1. I have values A1, B1, and C1. A1 contains a few names separated by a comma. I want to split A1 by these names while copying over the values from B1 and C1 into the split columns of A1. For example, I have this: (A1 B1 C1) bob,sam,bill 99 10 I want to have this: bob 99 10 sam 99 10 bill 99 10 I am also doing this on Google Sheets, I tried using combinations of Split, Join, and Transpose but can't seem to figure it out. Any help would be appreciated, thanks. EDIT: any updates? EDIT: still trying to figure this out.

    Read the article

  • how to split string with some seperator but without removing that seperator in Java?

    - by sag
    Hi, I m facing problem in splitting string. Actually i want to split a string with some seperator but without loosing that seperator. when we use somestring.split(String seperator) method in java it splits the string but removes the seperator part from string.It should not happen. I want result like below: Example::string1="Ram-sita-laxman"; seperator="-"; string1.split(seperator); output : [Ram, sita, laxman] but i want the result like :[Ram, -sita, -laxman] is there a way to get output like this?

    Read the article

  • String.split() - matching leading empty String prior to first delimiter?

    - by tehblanx
    I need to be able to split an input String by commas, semi-colons or white-space (or a mix of the three). I would also like to treat multiple consecutive delimiters in the input as a single delimiter. Here's what I have so far: String regex = "[,;\\s]+"; return input.split(regex); This works, except for when the input string starts with one of the delimiter characters, in which case the first element of the result array is an empty String. I do not want my result to have empty Strings, so that something like, ",,,,ZERO; , ;;ONE ,TWO;," returns just a three element array containing the capitalized Strings. Is there a better way to do this than stripping out any leading characters that match my reg-ex prior to invoking String.split? Thanks in advance!

    Read the article

  • Split a string and join it back together in a different order?

    - by Xaisoft
    What is the most concise, yet readable way to split a string and put join it back together in a different order. For example, I want to split the following string: 10-20-30-4000-50000 and I would do this via: string[] tokens = original.Split('-'); and now I want to put it back together in this order: 30-20-10-4000-50000 I know I can use Join to put it back together in it's original form, but I don't want that. The only thing I can think of right now is: string modified = string.Format("{0}{1}{2}{3}{4}",tokens[2],tokens[1],tokens[0],tokens[3], tokens[4]); I realized that if I do: string modified = string.Format("{2}{1}{0}{3}{4}", tokens); it does not keep the dashes which is what I want so is to do that, should I just do: string modified = string.Format("{2}-{1}-{0}-{3}-{4}", tokens);

    Read the article

  • Raid 1 array won't assemble after power outage. How do I fix this ext4 mirror?

    - by Forkrul Assail
    Two ext4 drives on Raid 1 with mdadm won't reassemble after the power went out for an extended period (UPS drained). After turning the machine back on, mdadm said that the array was degraded, after which it took about 2 days for a full resync, which completed without problems. On trying to remount the array I get: mount: you must specify the filesystem type cat /etc/fstab lines relevant to setup: /dev/md127 /media/mediapool ext4 defaults 0 0 dmesg | tail (on trying to mount) says: [ 1050.818782] EXT3-fs (md127): error: can't find ext3 filesystem on dev md127. [ 1050.849214] EXT4-fs (md127): VFS: Can't find ext4 filesystem [ 1050.944781] FAT-fs (md127): invalid media value (0x00) [ 1050.944782] FAT-fs (md127): Can't find a valid FAT filesystem [ 1058.272787] EXT2-fs (md127): error: can't find an ext2 filesystem on dev md127. cat /proc/mdstat says: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md127 : active (auto-read-only) raid1 sdj[2] sdi[0] 2930135360 blocks super 1.2 [2/2] [UU] unused devices: <none> fsck /dev/md127 says: fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/md127 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> mdadm -E /dev/sdi gives me: /dev/sdi: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 3e6e9a4f:6c07ab3d:22d47fce:13cecfd0 Update Time : Tue Nov 13 20:34:18 2012 Checksum : f7d10db9 - correct Events : 27 Device Role : Active device 0 Array State : AA ('A' == active, '.' == missing) boot@boot ~ $ sudo mdadm -E /dev/sdj /dev/sdj: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 37ac1824:eb8a21f6:bd5afd6d:96da6394 Name : sojourn:33 Creation Time : Sat Nov 10 10:43:52 2012 Raid Level : raid1 Raid Devices : 2 Avail Dev Size : 5860271016 (2794.40 GiB 3000.46 GB) Array Size : 2930135360 (2794.39 GiB 3000.46 GB) Used Dev Size : 5860270720 (2794.39 GiB 3000.46 GB) Data Offset : 262144 sectors Super Offset : 8 sectors State : clean Device UUID : 7fb84af4:e9295f7b:ede61f27:bec0cb57 Update Time : Tue Nov 13 20:34:18 2012 Checksum : b9d17fef - correct Events : 27 Device Role : Active device 1 Array State : AA ('A' == active, '.' == missing) machine@user ~ dmesg | tail [ 61.785866] init: alsa-restore main process (2736) terminated with status 99 [ 68.433548] eth0: no IPv6 routers present [ 534.142511] EXT4-fs (sdi): ext4_check_descriptors: Block bitmap for group 0 not in group (block 2838187772)! [ 534.142518] EXT4-fs (sdi): group descriptors corrupted! [ 546.418780] EXT2-fs (sdi): error: couldn't mount because of unsupported optional features (240) [ 549.654127] EXT3-fs (sdi): error: couldn't mount because of unsupported optional features (240) Since this is Raid 1 it was suggested that I try and mount or fsck the drives separately. After a long fsck on one drive, it ended with this as tail: Illegal double indirect block (2298566437) in inode 39717736. CLEARED. Illegal block #4231180 (2611866932) in inode 39717736. CLEARED. Error storing directory block information (inode=39717736, block=0, num=1092368): Memory allocation failed Recreate journal? yes Creating journal (32768 blocks): Done. *** journal has been re-created - filesystem is now ext3 again *** The drive however still doesn't want to mount: dmesg | tail [ 170.674659] md: export_rdev(sdc) [ 170.675152] md: export_rdev(sdc) [ 195.275288] md: export_rdev(sdc) [ 195.275876] md: export_rdev(sdc) [ 1338.540092] CE: hpet increased min_delta_ns to 30169 nsec [26125.734105] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [26125.734115] EXT4-fs (sdc): group descriptors corrupted! [26182.325371] EXT3-fs (sdc): error: couldn't mount because of unsupported optional features (240) [27083.316519] EXT4-fs (sdc): ext4_check_descriptors: Checksum for group 0 failed (43502!=37987) [27083.316530] EXT4-fs (sdc): group descriptors corrupted! Please help me fix this. I never in my wildest nightmares thought a complete mirror would die this badly. Am I missing something? Suggestions on fixing this? Could someone explain why it would resync after the powerout, only to seemingly nuke the drive? Thanks for reading. Any help much appreciated. I've tried everything I can think of, including booting and filesystem checking with SystemRescue and Ubuntu liveboot discs.

    Read the article

  • Looking for a function that will split profits/loss equally between 2 business partners.

    - by Hamish Grubijan
    This is not homework, for I am not a student. This is for my general curiosity. I apologize if I am reinventing the wheel here.The function I seek can be defined as follows (language agnostic): int getPercentageOfA(double moneyA, double workA, double moneyB, double workB) { // Perhaps you may assume that workA == 0 // Compute result return result; } Suppose Alice and Bob want to do business together ... such as ... selling used books. Alice is only interested in investing money in it and nothing else. Bob might invest some money, but he might have no $ available to invest. He will, however, put in the effort in finding a seller, a buyer, and doing maintenance. There are no tools, education, health insurance costs, or other expenses to consider. Both Alice and Bob wish to split the profits "equally" (A different weight like 40/60 for advanced users). Both are entrepreneurs, so they deal with low ROI/wage, and high income alike. There is no fixed wage, minimum wage, fixed ROI, or minimum ROI. They try to find the best deal possible, assume risks and go for it. Now, let's stick with the 50/50 model. If Alice invests $100, Bob invests work, and they will end up with a profit (or loss) of $60, they will split it equally - either both get $30 for their efforts/investments, or Bob ends up owing $30 to Alice. A second possibility: Both Alice and Bob invest 100, then Bob does all the work, and they end up splitting $60 profit. It looks like Alice should get only $15, because $30 of that profit came from Bob's investment and Bob's effort, so Alice shall have none of it, and the other $30 is to be split 50/50. Both of the examples above are trivial even when A and B want to split it 35/65 or what have you. Now it gets more complicated: What if Alice invests $70, and Bob invests $30 + does all of the work. It appears simple: (70,30) = (30,30) + (40,0) ... but, if only we knew how to weigh the two parts relative to each other. Another complicated (I think) example: what if Alice and Bob invest $70 and $30 respectively, and also put in an equal amount of work? I have a few data points: When A and B put in the same amount of work and the same $ - 50/50. When A puts in 100% of the money, and B does 100% of the work - 50/50. When A does all of the work and puts in all of the money - 100 for A / 0 for B (and vice-versa). When A puts in 50% of the money, and B puts in 50% of the money as well as does all of the work - 25 for A, and 75 for B (and vice-versa). If I fix things such that always workA = 0%, workB = 100% of the total work, then getPercentageOfA becomes a function: height z given x and y. The question is - how do you extrapolate this function between these several points? What is this function? If you can cover the cases when workA does not have to be 0% of the total work, and when investment vs work is split as 85/15 or using some other model, then what would the new function be?

    Read the article

  • Heavily customized split view controller in iPad app -- how?

    - by Macatomy
    I was going through some of the early screenshots of the first iPad apps and I came upon this: I'm just wondering, how is this done? Mainly, how has the detail view section of the split view been given a drop shadow and rounded corners, and for lack of better phrasing, how has it been "separated" from the master view (the default split view template has the master and detail view joined together with nothing but a vertical line separating the two)?

    Read the article

  • Ruby: Is there a way to split a string only with the first x occurrencies?

    - by zxcvbnm
    For example, suppose I have this: 001, "john doe", "male", 37, "programmer", "likes dogs, women, and is lazy" The problem is that the line is only supposed to have 6 fields. But if I separate it with split I get more, due to the comma being used improperly to separate the fields. Right now I'm splitting everything, then when I get to the 5-th index onward I concatenate all the strings. But I was wondering if there was a split(",",6) or something along these lines.

    Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >