us - Page 31 - Developer IT

Merely installing PHP5 causes my AWS Ubuntu server to die minutes later from a massive CPU spike

- by Mark Amery

I have an AWS server with Ubuntu 11.04 as the OS that is running an Apache2 webserver (incidentally Python-based and using Django). We recently needed to add support for php5 to let us use a third party PHP library (incidentally for serving minified versions of js and css files). However, for no reason any of us can discern, if we simply run sudo apt-get install php5 on the server, then the install appears to finish successfully but, without us taking any further action (including not yet running sudo apt-get install libapache2-mod-php5, which I think would be the next step for us if everything worked), or actually running any PHP scripts on the server, a few minutes later the server becomes impossible to connect to, and looking at the 'Monitoring' tab for the server in the EC2 Management Console reveals that a while after the installation, CPU usage spikes to 100% and stays there permanently (until we reboot the server from the AWS Console). After rebooting, the server also reliably dies within a few (between 0 and 10) minutes. We restored the server to a pre-PHP state from an AMI Image, observed that it was stable, and then tried installing PHP5 again and observed the server die in exactly the same way, so we're pretty much certain that installing PHP5 is what causes the symptoms. What on earth could be causing this behaviour, and how can we get PHP installed on the server without it dying?

Read the article

Looking for a nice and handy bandwidth limiter

- by Spirit

Here's the thing. My ISP are f*gs. Most of the time the network is realy good, but then again there are times when it sucks. They say we have 20mbp/s. Me and my brother are usually playing dota and it's fine. One of us plays the other's watching streaming or both of us are playing or something like that. But sometimes like one of these days one is lagging even if the other is watching youtube at 360p quality. So I do know that there are many bandwidth limiters out there. But what could you recommend given my situation. I like both of us to be able to install it and it would be good idea to have something like ON/OFF switch. When he is not here I would like to turn that thing off. But when one of us plays I would like to turn it ON and whatever I do, to be limited to 10 or 8mbps. That way we will not interrupt each other. Thanks guys :)

Read the article

Entity Framework 4.0: Creating objects of correct type when using lazy loading

- by DigiMortal

In my posting about Entity Framework 4.0 and POCOs I introduced lazy loading in EF applications. EF uses proxy classes for lazy loading and this means we have new types in that come and go dynamically in runtime. We don’t have these types available when we write code but we cannot forget that EF may expect us to use dynamically generated types. In this posting I will give you simple hint how to use correct types in your code. The background of lazy loading and proxy classes As a first thing I will explain you in short what is proxy class. Business classes when designed correctly have no knowledge about their birth and death – they don’t know how they are created and they don’t know how their data is persisted. This is the responsibility of object runtime. When we use lazy loading we need a little bit different classes that know how to load data for properties when code accesses the property first time. As we cannot add this functionality to our business classes (they may be stored through more than one data access technology or by more than one Data Access Layer (DAL)) we create proxy classes that extend our business classes. If we have class called Product and product has lazy loaded property called Customer then we need proxy class, let’s say ProductProxy, that has same public signature as Product so we can use it INSTEAD OF product in our code. ProductProxy overrides Customer property. If customer is not asked then customer is null. But if we ask for Customer property then overridden property of ProductProxy loads it from database. This is how lazy loading works. Problem – two types for same thing As lazy loading may introduce dynamically generated proxy types we don’t know in our application code which type is returned. We cannot be sure that we have Product not ProductProxy returned. This leads us to the following question: how can we create Product of correct type if we don’t know the correct type? In EF solution is simple. Solution – use factory methods If you are using repositories and you are not using factories (imho it is pretty pointless with mapper) you can add factory methods to your EF based repositories. Take a look at this class. public class Event { public int ID { get; set; } public string Title { get; set; } public string Location { get; set; } public virtual Party Organizer { get; set; } public DateTime Date { get; set; } } We have virtual member called Organizer. This property is virtual because we want to use lazy loading on this class so Organizer is loaded only when we ask it. EF provides us with method called CreateObject<T>(). CreateObject<T>() is member of ObjectContext class and it creates the object based on given type. In runtime proxy type for Event is created for us automatically and when we call CreateObject<T>() for Event it returns as object of Event proxy type. The factory method for events repository is as follows. public Event CreateEvent() { var evt = _context.CreateObject<Event>(); return evt; } And we are done. Instead of creating factory classes we created factory methods that guarantee that created objects are of correct type. Conclusion Although lazy loading introduces some new objects we cannot use at design time because they live only in runtime we can write code without worrying about exact implementation type of object. This holds true until we have clean code and we don’t make any decisions based on object type. EF4.0 provides us with very simple factory method that create and return objects of correct type. All we had to do was adding factory methods to our repositories.

Read the article

Kaiden and the Arachnoid Cyst

- by Martin Hinshelwood

Some of you may remember when my son Kaiden was born I posted pictures of him and his sister. Kaiden is now 15 months old and is progressing perfectly in every area except that and we had been worried that he was not walking yet. We were only really concerned as his sister was walking at 8 months. Figure: Kai as his usual self Jadie and I were concerned over that and that he had a rather large head (noggin) so we talked to various GP’s and our health visitor who immediately dismissed our concerns every time. That was until about two months ago when we happened to get a GP whose daughter had Hyper Mobility and she recognised the symptoms immediately. We were referred to the Southbank clinic who were lovely and the paediatrician confirmed that he had Hyper Mobility after testing all of his faculties. This just means that his joints are overly mobile and would need a little physiotherapy to help him out. At the end the paediatrician remarked offhand that he has a rather large head and wanted to measure it. Sure enough he was a good margin above the highest percentile mark for his height and weight. The paediatrician showed the measurements to a paediatric consultant who, as a precautionary measure, referred us for an MRI at Yorkhill Children's hospital. Now, Yorkhill has always been fantastic to us, and this was no exception. You know we have NEVER had a correct diagnosis for the kids (with the exception of the above) from a GP and indeed twice have been proscribed incorrect medication that made the kids sicker! We now always go strait to Yorkhill to save them having to fix GP mistakes as well. Monday 24th May, 7pm The scan went fantastically, with Kaiden sleeping in the MRI machine for all but 5 minutes at the end where he waited patiently for it to finish. We were not expecting anything to be wrong as this was just a precautionary scan to make sure that nothing in his head was affecting his gross motor skills. After the scan we were told to expect a call towards the end of the week… Tuesday 25th May, 12pm The very next day we got a call from Southbank who said that they has found an Arachnoid Cyst and could we come in the next day to see a Consultant and that Kai would need an operation. Wednesday 26th May, 12:30pm We went into the Southbank clinic and spoke to the paediatric consultant who assured us that it was operable but that it was taking up considerable space in Kai’s head. Cerebrospinal fluid is building up as a cyst is blocking the channels it uses to drain. Thankfully they told us that prospects were good and that Kai would expect to make a full recovery before showing us the MRI pictures. Figure: Normal brain MRI cross section. This normal scan shows the spaces in the middle of the brain that contain and produce the Cerebrospinal fluid. Figure: Normal Cerebrospinal Flow This fluid is needed by the brain but is drained in the middle down the spinal column. Figure: Kai’s cyst blocking the four channels. I do not think that I need to explain the difference between the healthy picture and Kai’s picture. However you can see in this first picture the faint outline of the cyst in the middle that is blocking the four channels from draining. After seeing the scans a Neurosurgeon has decided that he is not acute, but needs an operation to unblock the flow. Figure: OMFG! You can see in the second picture the effect of the build up of fluid. If I was not horrified by the first picture I was seriously horrified by this one. What next? Kai is not presenting the symptoms of vomiting or listlessness that would show an immediate problem and as such we will get an appointment to see the Paediatric Neurosurgeon at the Southern General hospital in about 4 weeks. This timescale is based on the Neurosurgeon seeing the scans. After that Kai will need an operation to release the pressure and either remove the cyst completely or put in a permanent shunt (tube from brain to stomach) to bypass the blockage. We have updated his notes for the referral with additional recent information on top of the scan that the consultant things will help improve the timescales, but that is just a guess. All we can do now is wait and see, and be watchful for tell tail signs of listlessness, eye problems and vomiting that would signify a worsening of his condition. Technorati Tags: Personal

Read the article

SQL SERVER – Fundamentals of Columnstore Index

- by pinaldave

There are two kind of storage in database. Row Store and Column Store. Row store does exactly as the name suggests – stores rows of data on a page – and column store stores all the data in a column on the same page. These columns are much easier to search – instead of a query searching all the data in an entire row whether the data is relevant or not, column store queries need only to search much lesser number of the columns. This means major increases in search speed and hard drive use. Additionally, the column store indexes are heavily compressed, which translates to even greater memory and faster searches. I am sure this looks very exciting and it does not mean that you convert every single index from row store to column store index. One has to understand the proper places where to use row store or column store indexes. Let us understand in this article what is the difference in Columnstore type of index. Column store indexes are run by Microsoft’s VertiPaq technology. However, all you really need to know is that this method of storing data is columns on a single page is much faster and more efficient. Creating a column store index is very easy, and you don’t have to learn new syntax to create them. You just need to specify the keyword “COLUMNSTORE” and enter the data as you normally would. Keep in mind that once you add a column store to a table, though, you cannot delete, insert or update the data – it is READ ONLY. However, since column store will be mainly used for data warehousing, this should not be a big problem. You can always use partitioning to avoid rebuilding the index. A columnstore index stores each column in a separate set of disk pages, rather than storing multiple rows per page as data traditionally has been stored. The difference between column store and row store approaches is illustrated below: In case of the row store indexes multiple pages will contain multiple rows of the columns spanning across multiple pages. In case of column store indexes multiple pages will contain multiple single columns. This will lead only the columns needed to solve a query will be fetched from disk. Additionally there is good chance that there will be redundant data in a single column which will further help to compress the data, this will have positive effect on buffer hit rate as most of the data will be in memory and due to same it will not need to be retrieved. Let us see small example of how columnstore index improves the performance of the query on a large table. As a first step let us create databaseset which is large enough to show performance impact of columnstore index. The time taken to create sample database may vary on different computer based on the resources. USE AdventureWorks GO -- Create New Table CREATE TABLE [dbo].[MySalesOrderDetail]( [SalesOrderID] [int] NOT NULL, [SalesOrderDetailID] [int] NOT NULL, [CarrierTrackingNumber] [nvarchar](25) NULL, [OrderQty] [smallint] NOT NULL, [ProductID] [int] NOT NULL, [SpecialOfferID] [int] NOT NULL, [UnitPrice] [money] NOT NULL, [UnitPriceDiscount] [money] NOT NULL, [LineTotal] [numeric](38, 6) NOT NULL, [rowguid] [uniqueidentifier] NOT NULL, [ModifiedDate] [datetime] NOT NULL ) ON [PRIMARY] GO -- Create clustered index CREATE CLUSTERED INDEX [CL_MySalesOrderDetail] ON [dbo].[MySalesOrderDetail] ( [SalesOrderDetailID]) GO -- Create Sample Data Table -- WARNING: This Query may run upto 2-10 minutes based on your systems resources INSERT INTO [dbo].[MySalesOrderDetail] SELECT S1.* FROM Sales.SalesOrderDetail S1 GO 100 Now let us do quick performance test. I have kept STATISTICS IO ON for measuring how much IO following queries take. In my test first I will run query which will use regular index. We will note the IO usage of the query. After that we will create columnstore index and will measure the IO of the same. -- Performance Test -- Comparing Regular Index with ColumnStore Index USE AdventureWorks GO SET STATISTICS IO ON GO -- Select Table with regular Index SELECT ProductID, SUM(UnitPrice) SumUnitPrice, AVG(UnitPrice) AvgUnitPrice, SUM(OrderQty) SumOrderQty, AVG(OrderQty) AvgOrderQty FROM [dbo].[MySalesOrderDetail] GROUP BY ProductID ORDER BY ProductID GO -- Table 'MySalesOrderDetail'. Scan count 1, logical reads 342261, physical reads 0, read-ahead reads 0. -- Create ColumnStore Index CREATE NONCLUSTERED COLUMNSTORE INDEX [IX_MySalesOrderDetail_ColumnStore] ON [MySalesOrderDetail] (UnitPrice, OrderQty, ProductID) GO -- Select Table with Columnstore Index SELECT ProductID, SUM(UnitPrice) SumUnitPrice, AVG(UnitPrice) AvgUnitPrice, SUM(OrderQty) SumOrderQty, AVG(OrderQty) AvgOrderQty FROM [dbo].[MySalesOrderDetail] GROUP BY ProductID ORDER BY ProductID GO It is very clear from the results that query is performance extremely fast after creating ColumnStore Index. The amount of the pages it has to read to run query is drastically reduced as the column which are needed in the query are stored in the same page and query does not have to go through every single page to read those columns. If we enable execution plan and compare we can see that column store index performance way better than regular index in this case. Let us clean up the database. -- Cleanup DROP INDEX [IX_MySalesOrderDetail_ColumnStore] ON [dbo].[MySalesOrderDetail] GO TRUNCATE TABLE dbo.MySalesOrderDetail GO DROP TABLE dbo.MySalesOrderDetail GO In future posts we will see cases where Columnstore index is not appropriate solution as well few other tricks and tips of the columnstore index. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Index, SQL Optimization, SQL Performance, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

FY12 Partner Kickoff – Are you Ready?

- by user715249

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Want to know what Oracle has up its sleeve for FY12? Join us on June 28th (or 29th depending on your region) as we kick off the new year and fill you in on our latest plans. This live, interactive session will be hosted by Judson Althoff and he’s bringing some top Oracle executives into the studio with him. Take a peek below as Lydia Smyers, Oracle WW A&C vice president, talks about this upcoming event. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} As if that weren’t enough, Oracle President Mark Hurd will update you on his focus for partners in FY12 and OPN will be making a special announcement for our ISV partners highlighting some exciting new offerings on how we will go to market together. But wait, there’s more – you’ll also hear from Oracle product executives and regional sales leaders outlining their priorities for the upcoming year. Phew – We’re tired just thinking about all of the great content that will be shared on June 28th/29th. There are a lot of exciting announcements in store for you later this month so tune in for the latest updates! Register now to get your name on ‘the list’, The OPN Communications Team

Read the article

Design a T-shirt for .NET Reflector Pro

- by Laila

Win a .NET Reflector Pro license, a box of Red Gate goodies, and a t-shirt printed with your design! Red Gate likes t-shirts. Each of our teams has one. In fact, each individual person has one, numbered according to when they joined the company: Red Gate's 1st, 2nd, and so on right up to Red Gate's 170th, with the slogan "More than just a number". Those t-shirts are important, chiefly because they remind the people wearing them that they are important. But that isn't enough. What really makes us great are the people who choose to use our tools. So we'd like to extend our tradition of t-shirts to include you and put the design of our next shirt entirely in your hands. We'd like you to come up with a witty slogan or create an inventive or simply beautiful t-shirt design for .NET Reflector Pro, our add-in for Visual Studio, which allows you to step into decompiled assemblies whilst debugging in Visual Studio. When you're done, post your masterpiece to Twitter with the hash tag #reflectortees, and @redgate will take a look! We'll pick the best design, and the winner will get a licensed copy of .NET Reflector Pro and a box of Red Gate goodies - not to mention a copy of their t-shirt. The winning design will go into production and be worn and given out at tradeshows, conferences, and user group events across the world, proudly bearing the name of their designer. We'll also pick three runners-up who will receive licenses for .NET Reflector Pro. Red Gate goodie box Interested? If you're up for the challenge, then we've got some resources to get you started. Inside the .zip file you'll find high-quality versions of the following: T-shirt templates: don't forget to design the front and the back! Different versions of the .NET Reflector Pro logo and Red Gate logo. Colour sheets to give you an easy reference to the Red Gate colours, including hex and RGB values. You can create and send us as many designs as you like, and each of them will be considered for the prize. To submit your designs, simply tweet including the competition hash tag, #reflectortees, and a link to somewhere we can see your design: either an image hosting site such as Twitpic, Flickr or Picasa, or a personal blog. You will need to create a Twitter account (which is free), if you don't already have one. You only have three limits: The background colour of the t-shirt should be one of our brand colours (red, light/dark grey or black), though you're welcome to use other colours in the rest of the design. You need to make use of either the .NET Reflector Pro logo OR the Red Gate logo (please keep them as they are) If you include any text or slogan, stick with just one or two colors for it. Apart from that, go wild. Go and do whatever it is you do when you get creative: whether you walk barefoot on the grass with a pencil and paper, sit cross-legged on a pile of cushions with a laptop, or simply close your eyes and float through a mist of ideas, now is your chance. Make sure you enjoy it. We're looking forward to seeing your creations. Terms and conditions 1. The closing date for entries is June 11th, 2010 (4 p.m. UK time). Red Gate Software Ltd reserves the right to extend the competition deadline at its discretion. If there is a revision, the revised date will be published on this blog and the date for announcing the results will be postponed accordingly. 2. The winning designer will be notified on June 14th, 2010 through Twitter. The winner must claim his/her prize by sending us a high-resolution image of their design via email (i.e. Illustrator EPS files or appropriate format, ideally at 300dpi). If the winner does not come forward within 3 days of the announcement, they will forfeit their prize and another winner will be selected from the runners-up. The names of the winner and runners-up will be posted on this blog by June 18th. 3. Entry is completed on the designer posting a link to their entry in a tweet with the correct hash tag, #reflectortees. 4. Red Gate Software needs to hold the rights to using the winning design in order to put the t-shirt into production. We will make sure that this is fine with the winner before we do so, but if you do not want us holding the rights to your design, please do not submit your designs. We reserve the right to slightly alter or adjust any artwork we decide to use (mainly to make it easier to print), but we will make sure we contact the winner for approval first. The winner will also need to allow us the use of his/her name for purposes of promoting your design. 5. Entries must be entirely your own original work and must not breach any copyright or third party rights. Red Gate Software Ltd will not be made partially or fully liable for any non-original work submitted by you. 6. This competition is free: you do not need to buy anything or be an existing customer to enter. 7. This competition is not open to employees of Red Gate Software Ltd, their families, or any other company directly connected with the administration of this promotion.

Read the article

The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

- by david.talamelli

[Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

Read the article

Day 1 - Finding Like Minds

- by dapostolov

So, is being a Game Developer any different from being an IT Developer? I picture a poorly lit environment where I get to purchase my own desk lamp; I'm thinking one of those huge lava lamps that pump out so much heat you could fry an egg on it. To my right: a "great wall" of empty coke cans dwarf me. Eating my last slice of pizza I look across my desk to see a fellow developer with a smug look on his face; he's just coded his latest module for the game and it looks like he's in nirvana. My duty, of course, is to remind him to keep focused on the job at hand. So, picking up my trusty elastic and aerodynamically crafted paper bullet I begin a 10 minute war of welts and laughter which is promptly abrupted by our Project Manager demanding more details from our morning Scrum meeting. After providing about 5 minutes of geek speak and several words of comfort to make his eyes glaze over...it hits me, the idea for the module...beckoning my developer friend over, we quickly shoo the Project Manager away and begin our brainstorming frenzy ... now, where'd I put that full can of coke? OK. OK. This isn't probably the most ideal game developer environment, but it definitely sounds fun to me...and from what I gather is nothing like most game development companies. But I'm not doing this blog series to "go pro"; like I stated in my first post I want to make a 2D game from an idea my best friend and I drummed up long, long ago. I'm in this for the passion AND I want to see how easy it is for us .Net Developers to create a game. So where do I start? Where can I find like minded individuals? What technologies are there? What do I need to make a video game? The questions are endless....AND...since I already have an idea ... lets start with ... Technology (yes, I'm a geek, live with it...) Technology OK. Predominantly, games are still made in C++ or even C. I'm not sure how much assembly code is floating around lately, however, that is not my concern. I do know C / C++ from my past, enough to even get me by, but I'm mainly interested in a recent, not-so-new, technology called XNA. What is XNA? XNA allows us .Net Developers to make 2D / 3D games for windows, Xbox*, and Windows Mobile 7*. * = for a nominal fee *cough* The following link is your one stop shop to XNA game development: http://creators.xna.com/en-US/education/gettingstarted The above site hosts information such as: - getting started - a sample/instructional shooter game in 2D / 3D with code (if I'm taking too long for you in this blog series) - downloads - starter kits... http://creators.xna.com/en-US/education/starterkits/ And of course...forums. You can also subscribe and pay for their premium membership which gets you some pretty awesome tutorials, resources, downloads, and premium community support. Some general Wiki information about XNA: http://en.wikipedia.org/wiki/XNA_%28Microsoft%29 Community Support OK. Let's move on to industry and community support. Apart from XNA, there are some really cool sites out there, I just haven't found all of them yet. However, I found a really cool Game Development website called Gamastura. You can click on the following link to get you there: http://www.gamasutra.com/ The site is 100% dedicated to "The Art & Business of Making Games". Armed with blogs, twitter, jobs/resumes and most importantly industry news; one could subscribe to the feed and got lost in the wealth of information it provides. On a side note: I remember Gamasutra being around when my best friend and I wanted to make a video game...meaning, they've been around for a while now. I think the most beneficial aspect of this site is to understand the industry you want to get into. Otherwise, it's just a cool site to keep up to date with the industry in general. Another Community Support option is LinkedIn. Amongst the land of extremely bloated achievements and responsibilities lay 3 groups (that I have found) that deal with game development.: http://www.linkedin.com/groups?gid=59205 - Game Developers http://www.linkedin.com/groups?gid=824817 - DirectX Game Developer Network http://www.linkedin.com/groups?gid=756587 - DirectX Developers The Game Developers group in LinkedIn is by far the most active of the three and could possibly provide a wealth of support. What I've done thus far: - I lightly researched the XNA technology - I looked around for some community sites to assist me - I downloaded the XNA Game Studio 3.1 on my PC and installed it on my IDE - I even tried both tutorials! http://creators.xna.com/en-US/education/gettingstarted/bgintro/chapter1 Best Regards D.

Read the article

Converting Encrypted Values

- by Johnm

Your database has been protecting sensitive data at rest using the cell-level encryption features of SQL Server for quite sometime. The employees in the auditing department have been inviting you to their after-work gatherings and buying you drinks. Thousands of customers implicitly include you in their prayers of thanks giving as their identities remain safe in your company's database. The cipher text resting snuggly in a column of the varbinary data type is great for security; but it can create some interesting challenges when interacting with other data types such as the XML data type. The XML data type is one that is often used as a message type for the Service Broker feature of SQL Server. It also can be an interesting data type to capture for auditing or integrating with external systems. The challenge that cipher text presents is that the need for decryption remains even after it has experienced its XML metamorphosis. Quite an interesting challenge nonetheless; but fear not. There is a solution. To simulate this scenario, we first will want to create a plain text value for us to encrypt. We will do this by creating a variable to store our plain text value: -- set plain text value DECLARE @PlainText NVARCHAR(255); SET @PlainText = 'This is plain text to encrypt'; The next step will be to create a variable that will store the cipher text that is generated from the encryption process. We will populate this variable by using a pre-defined symmetric key and certificate combination: -- encrypt plain text value DECLARE @CipherText VARBINARY(MAX); OPEN SYMMETRIC KEY SymKey DECRYPTION BY CERTIFICATE SymCert WITH PASSWORD='mypassword2010'; SET @CipherText = EncryptByKey ( Key_GUID('SymKey'), @PlainText ); CLOSE ALL SYMMETRIC KEYS; The value of our newly generated cipher text is 0x006E12933CBFB0469F79ABCC79A583--. This will be important as we reference our cipher text later in this post. Our final step in preparing our scenario is to create a table variable to simulate the existence of a table that contains a column used to hold encrypted values. Once this table variable has been created, populate the table variable with the newly generated cipher text: -- capture value in table variable DECLARE @tbl TABLE (EncVal varbinary(MAX)); INSERT INTO @tbl (EncVal) VALUES (@CipherText); We are now ready to experience the challenge of capturing our encrypted column in an XML data type using the FOR XML clause: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); If you add the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root> <MYTABLE EncVal="AG4Skzy/sEafeavMeaWDBwEAAACE--" /> </root> Strangely, the value that is captured appears nothing like the value that was created through the encryption process. The result being that when this XML is converted into a readable data set the encrypted value will not be able to be decrypted, even with access to the symmetric key and certificate used to perform the decryption. An immediate thought might be to convert the varbinary data type to either a varchar or nvarchar before creating the XML data. This approach makes good sense. The code for this might look something like the following: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT CONVERT(NVARCHAR(MAX),EncVal) AS EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); However, this results in the following error: Msg 9420, Level 16, State 1, Line 26 XML parsing: line 1, character 37, illegal xml character A quick query that returns CONVERT(NVARCHAR(MAX),EncVal) reveals that the value that is causing the error looks like something off of a genuine Chinese menu. While this situation does present us with one of those spine-tingling, expletive-generating challenges, rest assured that this approach is on the right track. With the addition of the "style" argument to the CONVERT method, our solution is at hand. When dealing with converting varbinary data types we have three styles available to us: - The first is to not include the style parameter, or use the value of "0". As we see, this style will not work for us. - The second option is to use the value of "1" will keep our varbinary value including the "0x" prefix. In our case, the value will be 0x006E12933CBFB0469F79ABCC79A583-- - The third option is to use the value of "2" which will chop the "0x" prefix off of our varbinary value. In our case, the value will be 006E12933CBFB0469F79ABCC79A583-- Since we will want to convert this back to varbinary when reading this value from the XML data we will want the "0x" prefix, so we will want to change our code as follows: -- capture set in xml DECLARE @xml XML; SET @xml = (SELECT CONVERT(NVARCHAR(MAX),EncVal,1) AS EncVal FROM @tbl AS MYTABLE FOR XML AUTO, BINARY BASE64, ROOT('root')); Once again, with the inclusion of the SELECT @XML statement at the end of this portion of the code you will see the contents of the XML data in its raw format: <root> <MYTABLE EncVal="0x006E12933CBFB0469F79ABCC79A583--" /> </root> Nice! We are now cooking with gas. To continue our scenario, we will want to parse the XML data into a data set so that we can glean our freshly captured cipher text. Once we have our cipher text snagged we will capture it into a variable so that it can be used during decryption: -- read back xml DECLARE @hdoc INT; DECLARE @EncVal NVARCHAR(MAX); EXEC sp_xml_preparedocument @hDoc OUTPUT, @xml; SELECT @EncVal = EncVal FROM OPENXML (@hdoc, '/root/MYTABLE') WITH ([EncVal] VARBINARY(MAX) '@EncVal'); EXEC sp_xml_removedocument @hDoc; Finally, the decryption of our cipher text using the DECRYPTBYKEYAUTOCERT method and the certificate utilized to perform the encryption earlier in our exercise: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('AuditLogCert'), N'mypassword2010', @EncVal ) ) EncVal; Ah yes, another hurdle presents itself! The decryption produced the value of NULL which in cryptography means that either you don't have permissions to decrypt the cipher text or something went wrong during the decryption process (ok, sometimes the value is actually NULL; but not in this case). As we see, the @EncVal variable is an nvarchar data type. The third parameter of the DECRYPTBYKEYAUTOCERT method requires a varbinary value. Therefore we will need to utilize our handy-dandy CONVERT method: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('AuditLogCert'), N'mypassword2010', CONVERT(VARBINARY(MAX),@EncVal) ) ) EncVal; Oh, almost. The result remains NULL despite our conversion to the varbinary data type. This is due to the creation of an varbinary value that does not reflect the actual value of our @EncVal variable; but rather a varbinary conversion of the variable itself. In this case, something like 0x3000780030003000360045003--. Considering the "style" parameter got us past XML challenge, we will want to consider its power for this challenge as well. Knowing that the value of "1" will provide us with the actual value including the "0x", we will opt to utilize that value in this case: SELECT CONVERT(NVARCHAR(MAX), DecryptByKeyAutoCert ( CERT_ID('SymCert'), N'mypassword2010', CONVERT(VARBINARY(MAX),@EncVal,1) ) ) EncVal; Bingo, we have success! We have discovered what happens with varbinary data when captured as XML data. We have figured out how to make this data useful post-XML-ification. Best of all we now have a choice in after-work parties now that our very happy client who depends on our XML based interface invites us for dinner in celebration. All thanks to the effective use of the style parameter.

Read the article

Reflections from the Young Prisms

- by Oracle OpenWorld Blog Team

By Karen Shamban The Young Prisms began their musical journey in San Francisco, and it's here they return to bring their unique sound to the Oracle OpenWorld Music Festival. We asked them to tell us their thoughts on music, performing, and what they like in an audience. Here's what they had to say: Q. What do you like best about performing in front of a live audience?A. There are a lot of things to love about playing in front of people. The best part is definitely the nights when the energy the audience brings shows through. Although it always differs from city to city and person to person, when you play to a full house and people are really getting into it, it's like no other feeling.Q. How do you use technology in creating and delivering your music?A. Well, we actually use a lot more electronic components than people realize. Pretty much every string instrument played either live or on recording has been filtered through numerous electronic effects. Matt uses somewhere around 12 or 14 every time we play live. Giovanni has six. Most of our writing and demoing is done with drum sequencers and samplers too, so it's safe to say we use technology to our advantage in the writing process. Live is a bit different, since we keep it to the basics with guitars and acoustic drums. We also tend to use projections when we play live, so technology helps us do that fairly easily as well.Q. Do you prefer smaller, intimate venues or larger, louder ones? Why?A. Couldn’t say we have a real preference in venue size. I mean, its always great to get to play through a massive killer sound system, but small venues when packed full are equally as special if not more so, because of the intimacy of it. Some of my favorite shows I've seen as an audience member/ fan have been at the smaller venues in San Francisco.Q. What about your fans surprises you?A. Sometimes the older guys are a surprise. We've played shows where there are more older guys in their 40s and 50s, who come and stare and take notes at our effects pedals. Then there are kids our age or in their 20s. Sometimes it's surprising to think that the older guys relate to what we're doing more than our peers and friends in our age group.Q. What about your live act surprises your fans?A. I think people are often surprised by how shy we can be. It feels like people expect us to be really rowdy and throw things and make really loud noises and get really aggressive on stage because some of the sounds we use can have an abrasive element to them. People expect Matt to have some kind of Kurt Cobain attitude, which he doesn’t at all. So it seems it surprises people to see musicians playing loud and noisy songs in their early and mid 20s being fairly tame and calm on stage.Q. There are going to be a lot of technical people (you could call them geeks) in the Oracle crowd -- what are they going to love about your performance?A. Hopefully most of them are pedal nerds like we are and like the previously mentioned “older dude crowd.” Besides that I hope they’d be into the projections and group of songs we're going to play for them.Q. What's new and different in the music you're making today, versus a year or two ago?A. I'd say there is more focus on the songwriting now and less of the noise today than last year. I think it's pretty evident on the new record compared to the last two. On the first two records we made as YP, we had another guitar player and songwriter who no longer plays with us. So the process in which we develop songs is different as well.Q. Have you been on tour recently? If so, what do you like about touring, and what do you dislike?A. Touring is amazing. Some people might tell you different if they've been doing it for what they'd call too long, but for us it's really a great chance to play for people who care about the music we're making and also to see and explore the world. Getting to visit so many different cities and explore so many different cultures is amazing. Of course we love getting into cultural foods too. Stefanie is a fashion geek so getting to go to New York as often as we do as well as getting to play in London and Paris is always especially fun for her.Q. Ever think about playing another kind of music? If so, what, and why?A. Never really thought about wanting to do anything drastically different. I think the style of music we play has a lot to do with the stuff we have been listening to both growing up and now. It wasn’t really a conscious decision to make sure it was a certain sound, so I'm not sure we've ever thought about doing a way different genre or whatever like electronic music or country. Although there have been times we've had conversations where we discuss possibly doing quiet sets or using the string synth sounds.Q. What are the top three things people should know about your music?A1. We like noise.A2. We use ambience and atmosphere as much as as we can.A3. Yes, the vocals are supposed to be mixed in with the guitars. Get more info: Oracle OpenWorld Music Festival Young Prisms

Read the article

Silverlight 4 Twitter Client – Part 7

- by Max

Download this article as a PDF Welcome back :) This week we are going to look at something more exciting and a much required feature for any twitter client – auto refresh so as to show new status updates. We are going to achieve this using Silverlight 4 Timers and a bit and refresh our datagrid every 2 minutes to show new updates. We will do this so that we do only minimal request to the twitter api, so that twitter does not block us – there is a limit of 150 request an hour. Let us get started now. Also we will get the profile user id hyperlinked, so that when ever the user click on it, we will take them to their twitter page. Also it was a pain to always run this application by pressing F5, then it would open in a browser you would have to right click uninstall and install it again to see any changes. All this and yet we were not able to debug it :( Now there is a solution for this to run a silverlight application directly out of browser and yet have the debug feature. Super cool, here is how. Right on the Silverlight project and go to debug and then select the Out-Of-Browser application option and choose the *.Web project. Then just right click on the SL project and set as Startup Project. There you go, now every time you press F5, it will automatically run out of browser and still have the debug options. I go to know about this after some binging. Now let us jump to the core straight away. 1) To get the user id hyperlinked, we need to have a DataGridTemplateColumn and within that have a HyperLinkButton. The code for this will be <data:DataGridTemplateColumn> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <HyperlinkButton Click="HyperlinkButton_Click" Content="{Binding UserName}" TargetName="_blank" ></HyperlinkButton> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> </data:DataGridTemplateColumn> 2) Now let us look at how we are getting this done by looking into HyperlinkButton_Click event handler. There we will dynamically set the NavigateUri to the twitter page. I tried to do this using some binding, eval like stuff as in ASP.NET, but no luck! private void HyperlinkButton_Click(object sender, RoutedEventArgs e) { HyperlinkButton hb = (HyperlinkButton)e.OriginalSource; hb.NavigateUri = new Uri("http://twitter.com/" + hb.Content.ToString(), UriKind.Absolute); } 3) Now we need to switch on our Timer right in the OnNavigated to event on our SL page. So we need to modify our OnNavigated event to some thing like below: protected override void OnNavigatedTo(NavigationEventArgs e) { image1.Source = new BitmapImage(new Uri(GlobalVariable.profileImage, UriKind.Absolute)); this.Title = GlobalVariable.getUserName() + " - Home"; if (!GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Login", UriKind.Relative)); else { currentGrid = "Timeline-Grid"; TwitterCredentialsSubmit(); myDispatcherTimer.Interval = new TimeSpan(0, 0, 0, 60, 0); myDispatcherTimer.Tick += new EventHandler(Each_Tick); myDispatcherTimer.Start(); } } I use a global string – here it is currentGrid variable to indicate what is bound in the datagrid so that after every timer tick, I can rebind the latest data to it again. Like I will only rebind the friends timeline again if the data grid currently holds it and I’ll only rebind the respective list status again in the data grid, if already a list status is bound to the data grid. In the above timer code, its set to trigger the Each_Tick event handler every 1 minute (60 seconds). TimeSpan takes in (days, hours, minutes, seconds, milliseconds). 4) Now we need to set the list name in the currentGrid variable when a list button is clicked. So add the code line below to the list button event handler currentGrid = currentList = b.Content.ToString(); 5) Now let us see how Each_Tick event handler is implemented. public void Each_Tick(object o, EventArgs sender) { if (!currentGrid.Equals("Timeline-Grid")) getListStatuses(currentGrid); else { WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(GlobalVariable.getUserName(), GlobalVariable.getPassword()); myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); } } If the data grid hold friends timeline, I just use the same bit of code we had already to bind the friends timeline to the data grid. Copy Paste. But if it is some list timeline that is bound in the datagrid, I then call the getListStatus method with the currentGrid string which will actually be holding the list name. 6) I wanted to make the hyperlinks inside the status message as hyperlinks and when the user clicks on it, we can then open that link. I tried using a convertor and using a regex to recognize a url and wrap it up with a href, but that is not gonna work in silverlight textblock :( Anyways that convertor code is in the zip file. 7) You can get the complete project files from here. 8) Please comment below for your doubts, suggestions, improvements. I will try to reply as early as possible. Thanks for all your support. Technorati Tags: Silverlight 4,Datagrid,Twitter API,Silverlight Timer

Read the article

Silverlight 4 Twitter Client - Part 2

- by Max

We will create a few classes now to help us with storing and retrieving user credentials, so that we don't ask for it every time we want to speak with Twitter for getting some information. Now the class to sorting out the credentials. We will have this class as a static so as to ensure one instance of the same. This class is mainly going to include a getter setter for username and password, a method to check if the user if logged in and another one to log out the user. You can get the code here. Now let us create another class to facilitate easy retrieval from twitter xml format results for any queries we make. This basically involves just creating a getter setter for all the values that you would like to retrieve from the xml document returned. You can get the format of the xml document from here. Here is what I've in my Status.cs data structure class. using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; namespace MaxTwitter.Classes { public class Status { public Status() {} public string ID { get; set; } public string Text { get; set; } public string Source { get; set; } public string UserID { get; set; } public string UserName { get; set; } } } Now let us looking into implementing the Login.xaml.cs, first thing here is if the user is already logged in, we need to redirect the user to the homepage, this we can accomplish using the event OnNavigatedTo, which is fired when the user navigates to this particular Login page. Here you utilize the navigate to method of NavigationService to goto a different page if the user is already logged in. if (GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Home", UriKind.Relative)); On the submit button click event, add the new event handler, which would save the perform the WebClient request and download the results as xml string. WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); The following line allows us to create a web client to create a web request to a url and get back the string response. Something that came as a great news with SL 4 for many SL developers. WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(TwitterUsername.Text, TwitterPassword.Password); Here in the following line, we add an event that has to be fired once the xml string has been downloaded. Here you can do all your XLINQ stuff. myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); Now let us look at implementing the TimelineRequestCompleted event. Here we are not actually using the string response we get from twitter, I just use it to ensure the user is authenticated successfully and then save the credentials and redirect to home page. public void TimelineRequestCompleted(object sender, System.Net.DownloadStringCompletedEventArgs e) { if (e.Error != null) { MessageBox.Show("This application must be installed first"); } If there is no error, we can save the credentials to reuse it later. else { GlobalVariable.saveCredentials(TwitterUsername.Text, TwitterPassword.Password); this.NavigationService.Navigate(new System.Uri("/Home", UriKind.Relative)); } } Ok so now login page is done. Now the main thing – running this application. This credentials stuff would only work, if the application is run out of the browser. So we need fiddle with a few Silverlioght project settings to enable this. Here is how: Right click on Silverlight > properties then check the "Enable running application out of browser". Then click on Out-Of-Browser settings and check "Require elevated trust…" option. That's it, all done to run. Now press F5 to run the application, fix the errors if any. Then once the application opens up in browser with the login page, right click and choose install. Once you install, it would automatically run and you can login and can see that you are redirected to the Home page. Here are the files that are related to this posts. We will look at implementing the Home page, etc… in the next post. Please post your comments and feedbacks; it would greatly help me in improving my posts! Thanks for your time, catch you soon.

Read the article

Modularity through HTTP

- by Michael Williamson

As programmers, we strive for modularity in the code we write. We hope that splitting the problem up makes it easier to solve, and allows us to reuse parts of our code in other applications. Object-orientation is the most obvious of many attempts to get us closer to this ideal, and yet one of the most successful approaches is almost accidental: the web. Programming languages provide us with functions and classes, and plenty of other ways to modularize our code. This allows us to take our large problem, split it into small parts, and solve those small parts without having to worry about the whole. It also makes it easier to reason about our code. So far, so good, but now that we’ve written our small, independent module, for example to send out e-mails to my customers, we’d like to reuse it in another application. By creating DLLs, JARs or our platform’s package container of choice, we can do just that – provided our new application is on the same platform. Want to use a Java library from C#? Well, good luck – it might be possible, but it’s not going to be smooth sailing. Even if a library exists, it doesn’t mean that using it going to be a pleasant experience. Say I want to use Java to write out an XML document to an output stream. You’d imagine this would be a simple one-liner. You’d be wrong: import org.w3c.dom.*; import java.io.*; import javax.xml.transform.*; import javax.xml.transform.dom.*; import javax.xml.transform.stream.*; private static final void writeDoc(Document doc, OutputStream out) throws IOException { try { Transformer t = TransformerFactory.newInstance().newTransformer(); t.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, doc.getDoctype().getSystemId()); t.transform(new DOMSource(doc), new StreamResult(out)); } catch (TransformerException e) { throw new AssertionError(e); // Can't happen! } } Most of the time, there is a good chance somebody else has written the code before, but if nobody can understand the interface to that code, nobody’s going to use it. The result is that most of the code we write is just a variation on a theme. Despite our best efforts, we’ve fallen a little short of our ideal, but the web brings us closer. If we want to send e-mails to our customers, we could write an e-mail-sending library. More likely, we’d use an existing one for our language. Even then, we probably wouldn’t have niceties like A/B testing or DKIM signing. Alternatively, we could just fire some HTTP requests at MailChimp, and get a whole slew of features without getting anywhere near the code that implements them. The web is inherently language agnostic. So long as your language can send and receive text over HTTP, and probably parse some JSON, you’re about as well equipped as anybody. Instead of building libraries for a specific language, we can build a service that almost every language can reuse. The text-based nature of HTTP also helps to limit the complexity of the API. As SOAP will attest, you can still make a horrible mess using HTTP, but at least it is an obvious horrible mess. Complex data structures are tedious to marshal to and from text, providing a strong incentive to keep things simple. By contrast, spotting the complexities in a class hierarchy is often not as easy. HTTP doesn’t solve every problem. It probably isn’t such a good idea to use it inside an inner loop that’s executed thousands of times per second. What’s more, the HTTP approach might introduce some new problems. We often need to add a thin shim to each application that we wish to communicate over HTTP. For instance, we might need to write a small plugin in PHP if we want to integrate WordPress into our system. Suddenly, instead of a system written in one language, we’re maintaining a system with several distinct languages and platforms. Even then, we should strive to avoid re-implementing the same old thing. As programmers, we consistently underestimate both the cost of building a system and the ongoing maintenance. If we allow ourselves to integrate existing applications, even if they’re in unfamiliar languages, we save ourselves those development and maintenance costs, as well as being able to pick the best solution for our problem. Thanks to the web, HTTP is often the easiest way to get there.

Read the article

What do the participants say about the Open Day in South Africa?

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 On the 26th of September, a group of students who were specifically selected to attend an Open day at Oracle South Africa, joined us at our offices in Woodmead, Johannesburg. The Conference room was filled with inquisitive minds. What we had in store for them was a detailed presentation about Oracle which was delivered by Zuko - Cluster Leader: Tech GB South Africa. The student’s many questions were all answered especially when we started addressing the opportunities we have and detailed information on our Graduate Programme. Our employees then came to talk about their experience. This allowed all the students to have an integrated learning experience. By inviting the students to walk around our Oracle Offices allowed them to see, talk, experience a bit of the culture and ask more questions. Here is some of the feedback from the attendees: Maxwell Moloi: “The open day truly served its purpose and exceeded expectations in the sense that I got to find out more about Oracle and all the different opportunities it has to offer. The fact that Oracle supplies a full solution to a customer and not just part of it and how the company manages to setup professional development for their employees is what entices me to want to join the rapidly growing team of Oracle.” Nqobile Mabaso: “I found the open day to be quite informative and enlightening because coming from a marketing background I could apply the knowledge I got from varsity to the Company I was able to point out what they do as part of their corporate social responsibility (Oracle recently partnered with the department of education to build a school), how Oracle emphasizes on relationship building because they know they sell to people and not companies and how they offer the full stack of solutions which gives them a competitive advantage over their competitors.” Nondumiso Mvelase: “The Open Day was a wonderful experience for me especially because I have never been part of an Open Day before, so it was absolutely amazing for me. It gave me a good idea of how it is to be part of Oracle. We were served with lovely breakfast and lunch which I enjoyed. I wish the Open Day went on for a whole week. Seeing and hearing from 2013 Graduates, telling us about their experience within Oracle was very inspiring to me. They were encouraging us to work hard if we ever got the opportunity they had. After hearing this from them I will definitely not take it for granted.” Itumeleng Moraka: “Before I walked into the Oracle offices all that was in my mind was databases and cloud storage. I was then surrounded by passionate, enthusiastic and welcoming employees. I came across a positive energy within the multinational company. I realized that Oracle is not a company that operates in survival mode. This may sound idealistic, but they operate in a non-traditional way investing more into innovation, they stay focused on what matters most about where technology is going and at the same time they are not losing sight of how their products make a difference in the world.” For more information on how to be part of the Oracle Graduate Programme please follow us on Facebook! https://www.facebook.com/CampusAtOracle /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

From the Classroom to the Boardroom

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Pens and Paper...these are the only things being a student and being a graduate / professional have in common. Walking in to the offices of Oracle South Africa as a graduate the first thing you notice is how polished and sleek all the people who work here look. 80% of the ladies wear sky-scraper heels and walk with the greatest grace. This was the first of many rude awakenings to remind me that I am no longer a student but a graduate. My first struggle was having to wake up at wee hours of the morning to prepare for work. As a student going to class was almost an optional thing, if you missed a morning class you could always attend an evening class to make up for it or simply attend with another group. But in the workplace, you HAVE to show up every single morning at the same time, with no option of coming in when it suits you and there is definitely no coming in with the evening class/shift. As a student, the earliest hour I ever woke up was 7:00am, anything earlier than that was considered inhumane torture. My reason for waking up every morning as a student was “you have a degree to go get” but as a graduate having to go to work I have to say to myself “here’s to a new day of learning and growing”. My second struggle has come in having to change my beloved wardrobe. Everyone who knows me knows how passionate I am about fashion and shopping. For me Shopping is a BASIC HUMAN RIGHT, that should not be messed with. Therefore it was with great sadness that I swopped my rippled skinny jeans for pin-striped formal pants, my long chandelier earrings for simple studs, my flat shoes for heels, my sheer blouses for crisp white shirts, even my beloved wild hair had to make way for a simple ponytail. Our looks as ladies also came under great scrutiny, we had to acquaint ourselves with some serious grooming tools: the mascara, blush, lip-gloss, blush, a touch of lipstick and a manicure set. Language was a struggle of its own as well. Being a student you learn to relate to your peers in a informal way. In the workplace you have to address everyone with the same respect, including your peers. Words like “Hey buddy” had to make way for “good morning friend”. The month long winter school holiday was one of the things I looked forward to as a student. This was a time where we got to be at home and avoid the coldest month of the year, July. It was the most amazing thing ever, just sleeping and snuggling up to all sorts of warm things but sadly it is now a thing of the past. It is currently winter in South Africa and going to work has become the most unfashionable thing with all the jackets, boots, scarves and gloves. But summer is coming and I will miss those holidays too. As a student the school holidays were like a gift for us to catch a break and not think for a while which was why it was imaginable how someone would go on for the entire year without a break, with only the promise of a mere 21 days annual leave!! Right now I am sure we are all looking forward to taking that annual leave when the time is right. The worst rude awakening I must say, has to be presenting in front of clients and managers. As a student you have the same class mates for almost four years therefore presenting in front of them becomes the norm over the years and your lecturer will always go gently on you. What they don’t tell you at University is that in the real world, time is money and clients pay money to see you present therefore there is no room for error. Clients are not there to give you a score and boost your ego, they expect nothing less than 100% and they will let you know without a second thought. For a graduate this can feel like you are being fed to the sharks, you either get eaten or you swim for your life. At the end of the day, it is all an experience that is meant to groom us into better professional and make us a part of the Red Team. All the sacrifices are worth it and they lead us to being better and more polished professionals. So if you are interested in joining the ECEMEA Sales and Presales Internship Programme, please have a look at http://campus.oracle.com for more information and for our latest vacancies and internships. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

2012–The End Of The World Review

- by Tim Murphy

The end of the world must be coming. Not because the Mayan calendar says so, but because Microsoft is innovating more than Apple. It has been a crazy year, with pundits declaring not that the end of the world is coming, but that the end of Microsoft is coming. Let’s take a look at what 2012 has brought us. The beginning of year is a blur. I managed to get to TechEd in June which was the first time that I got to take a deep dive into Windows 8 and many other things that had been announced in 2011. The promise I saw in these products was really encouraging. The thought of being able to run Windows 8 from a thumb drive or have Hyper-V native to the OS told me that at least for developers good things were coming. I finally got my feet wet with Windows 8 with the developer preview just prior to the RTM. While the initial experience was a bit of a culture shock I quickly grew to love it. The media still seems to hold little love for the “reimagined” platform, but I think that once people spend some time with it they will enjoy the experience and what the FUD mongers say will fade into the background. With the launch of the OS we finally got a look at the Surface. I think this is a bold entry into the tablet market. While I wish it was a little more affordable I am already starting to see them in the wild being used by non-techies. I was waiting for Windows Phone 8 at least as much as Windows 8, probably more. The new hardware, better marketing and new OS features I think are going to finally push us to the point of having a real presence in the smartphone market. I am seeing a number of iPhone users picking up a Nokia Lumia 920 and getting rid of their brand new iPhone 5. The only real debacle that I saw around the launch was when they held back the SDK from general developers. Shortly after the launch events came Build 2012. I was extremely disappointed that I didn’t make it to this year’s Build. Even if they weren’t handing out Surface and Lumia devices I think the atmosphere and content were something that really needed to be experience in person. Hopefully there will be a Build next year and it’s schedule will be announced soon. As you would expect Windows 8 and Windows Phone 8 development were the mainstay of the conference, but improvements in Azure also played a key role. This movement of services to the cloud will continue and we need to understand where it best fits into the solutions we build. Lower on the radar this year were Office 2013, SQL Server 2012, and Windows Server 2012. Their glory stolen by the consumer OS and hardware announcements, these new releases are no less important. Companies will see significant improvements in performance and capabilities if they upgrade. At TechEd they had shown some of the new features of Windows Server 2012 around hardware integration and Hyper-V performance which absolutely blew me away. It is our job to bring these important improvements to our company’s attention so that they can be leveraged. Personally, the consulting business in 2012 was the busiest it has been in a long time. More companies were ready to attack new projects after several years of putting them on the back burner. I also worked to bring back momentum to the Chicago Information Technology Architects Group. Both the community and clients are excited about the new technologies that have come out in 2012 and now it is time to deliver. What does 2013 have in store. I don’t see it be quite as exciting as 2012. Microsoft will be releasing the Surface Pro in January and it seems that we will see more frequent OS update for Windows. There are rumors that we may see a Surface phone in 2013. It has also been announced that there will finally be a rework of the XBox next fall. The new year will also be a time for us in the development community to take advantage of these new tools and devices. After all, it is what we build on top of these platforms that will attract more consumers and corporations to using them. Just as I am 99.999% sure that the world is not going to end this year, I am also sure that Microsoft will move on and that most of this negative backlash from the media is actually fear and jealousy. In the end I think we have a promising year ahead of us. del.icio.us Tags: Microsoft,Pundits,Mayans,Windows 8,Windows Phone 8,Surface

Read the article

Are there Negative Impact of opensource on commercial environment?

- by Lostsoul

I know this is not a good fit for Stack Overflow but wasn't sure if it was good for this site also so let me know if its not and I'll delete it. I love programming for fun but my role in my company is not technical. I have always loved the hacker culture and have been trying to drive that openness within my company from day one. My company has a very broad range of products and there are a few that are not strategic to us so I wanted to open source them (so we can focus on what makes us unique and open source the products that every firm has). Our industry does not open source(we would be the first firm to try this) and the feedback I'm getting from my management team is either 1) we'll destroy the industry or 2) all competitive commercial firms will unite against us and we'll be wiped out either way. I disagreed on both points because I think transparency will only grow our industry and our firm (think of McDonalds/KFC sharing their recipe openly, people may copy you, competitors may target you, but customers also may feel more comfortable buying your product. The value add, I believe, is in the delivery and experience not in hoarding the recipe). It's a big battle in my firm right now between the IT people who have seen the positive effects of sharing and the business people who think we'll be giving up everything (they prefer we sell parts we want to opensource, but in their defense this is standard when divesting something). Our industry is very secretive and I don't want to put anyone(even my competitors employees) out of a job yet I don't want to protect inefficient people by not being open with everyone. Yet I've seen so many amazing technologies created in interesting ways just by giving people freedom to take apart code and put it back together. I'm interested in hearing people's thoughts(doesn't have to be to my specific situation, I'm looking for the general lessons). Its a very stressful decision(but one I feel I must make) because if we go the open source route then there will be no going back. So what are your thoughts? Does open sourcing apply generally or is it only really applicable to software? Is it overall good for people in the industry and outside? I'm actually more interested in the negativeness effects(although positive are welcomed as well) Update: Long story short, although code is involved this is not so much about code as it is more about the idea of open sourcing. We are a mid sized quant hedge fund. We have some unique strategies but also have the standard long/short, arbitrage, global macro, etc.. funds. We are keeping the unique funds we have but the other stuff that everyone else has we are considering open sourcing (We have put in years of work & millions of dollars into. Our funds is pretty popular and our performance is either in first or second quartile so I suspect there will be interest but I don't know to what extent). The goal is not to get a community to work for us or anything, the goal is to let anyone who wants to tinker with it do so and create anything they want (it will not be part of our product line although I may unofficially allocate some our of staff's time to assist any community that grows). Although the code base is quite large, the value in this is the industry knowledge and approaches we have acquired (there are many books on artificial intelligence and quant trading but they are often years behind what's really going on as most firms forbid their staff from discussing what they are doing). We are also considering after we move our clients out to let the software still run and output the resulting portfolios for free as well so people can at least see the results(as long as we have avail. infrastructure). I think our main choices are, we can continue to fight for market share in a products that are becoming commoditized, we can shut the funds/products down(and keep the code but no one outside of our firm will ever learn from it) or we can open source it and let people do what they want. By open sourcing it, my idea is that the talent pool in the industry will grow because right now most of our hires have the same background (CFA, MBA, similar school, same experience,etc.. because we can't spend time training people so the industry 'standardizes' most people and thus the firms themselves start to look/act similar) but this may allow us to identify talent that has never been in the industry before (if we put a GPU license then as people learn from what we did, we can learn from what they do as well and maybe apply it to other areas of our firm). I see a lot of benefits but not many negatives while my peers at the company see the opposite.

Read the article

To Make Diversity Work, Managers Must Stop Ignoring Difference

- by HCM-Oracle

By Kate Pavao - Originally posted on Profit Executive coaches Jane Hyun and Audrey S. Lee noticed something during their leadership development coaching and consulting: Frustrated employees and overwhelmed managers. “We heard from voices saying, ‘I wish my manager understood me better’ or ‘I hope my manager would take the time to learn more about me and my background,’” remembers Hyun. “At the same token, the managers we were coaching had a hard time even knowing how to start these conversations.” Hyun and Lee wrote Flex to address some of the fears managers have when it comes to leading diverse teams—such as being afraid of offending their employees by stumbling into sensitive territory—and also to provide a sure-footed strategy for becoming a more effective leader. Here, Hyun talks about what it takes to create innovate and productive teams in an increasingly diverse world, including the key characteristics successful managers share. Q: What does it mean to “flex”? Hyun: Flexing is the art of switching between leadership styles to work more effectively with people who are different from you. It’s not fundamentally changing who you are, but it’s understanding when you need to adapt your style in a situation so that you can accommodate people and make them feel more comfortable. It’s understanding the gap that might exist between you and others who are different, and then flexing across that gap to get the result that you're looking for. It’s up to all of us, not just managers, but also employees, to learn how to flex. When you hire new people to the organization, they're expected to adapt. The new people in the organization may need some guidance around how to best flex. They can certainly take the initiative, but if you can give them some direction around the important rules, and connect them with insiders who can help them figure out the most critical elements of the job, that will accelerate how quickly they can contribute to your organization. Q: Why is it important right now for managers to understand flexing? Hyun: The workplace is becoming increasingly younger, multicultural and female. The numbers bear it out. Millennials are entering the workforce and becoming a larger percentage of it, which is a global phenomenon. Thirty-six percent of the workforce is multicultural, and close to half is female. It makes sense to better understand the people who are increasingly a part of your workforce, and how to best lead them and manage them as well. Q: What do companies miss out on when managers don’t flex? Hyun: There are high costs for losing people or failing to engage them. The estimated costs of replacing an employee is about 150 percent of that person’s salary. There are studies showing that employee disengagement costs the U.S. something like $450 billion a year. But voice is the biggest thing you miss out on if you don’t flex. Whenever you want innovation or increased productivity from your people, you need to figure out how to unleash these things. The way you get there is to make sure that everybody’s voice is at the table. Q: What are some of the common misassumptions that managers make about the people on their teams? Hyun: One is what I call the Golden Rule mentality: We assume when we go to the workplace that people are going to think like us and operate like us. But sometimes when you work with people from a different culture or a different generation, they may have a different mindset about doing something, or a different approach to solving a problem, or a different way to manage some situation. When see something that’s different, we don't understand it, so we don't trust it. We have this hidden bias for people who are like us. That gets in the way of really looking at how we can tap our team members best potential by understanding how their difference may help them be effective in our workplace. We’re trained, especially in the workplace, to make assumptions quickly, so that you can make the best business decision. But with people, it’s better to remain curious. If you want to build stronger cross-cultural, cross-generational, cross-gender relationships, before you make a judgment, share what you observe with that team member, and connect with him or her in ways that are mutually adaptive, so that you can work together more effectively. Q: What are the common characteristics you see in leaders who are successful at flexing? Hyun: One is what I call “adaptive ability”—leaders who are able to understand that someone on their team is different from them, and willing to adapt his or her style to do that. Another one is “unconditional positive regard,” which is basically acceptance of others, even in their vulnerable moments. This attitude of grace is critical and essential to a healthy environment in developing people. If you think about when people enter the workforce, they're only 21 years old. It’s quite a formative time for them. They may not have a lot of management experience, or experience managing complex or even global projects. Creating the best possible condition for their development requires turning their mistakes into teachable moments, and giving them an opportunity to really learn. Finally, these leaders are not rigid or constrained in a single mode or style. They have this insatiable curiosity about other people. They don’t judge when they see behavior that doesn’t make sense, or is different from their own. For example, maybe someone on their team is a less aggressive than they are. The leader needs to remain curious and thinks, “Wow, I wonder how I can engage in a dialogue with this person to get their potential out in the open.”

Read the article

How to get reviews success message in magento?

- by Raul

Read the article

Grouping on Multiple Field

- by Nisarg Mehta

Hi , I am generating XML file from Database as below... <?xml version = '1.0'?> <T0019> <IFTA_ACCOUNT> <IFTA_CARRIER_ID_NUMBER>705</IFTA_CARRIER_ID_NUMBER> <IFTA_LICENSE_NUMBER>631227666</IFTA_LICENSE_NUMBER> <IFTA_BASE_COUNTRY>US</IFTA_BASE_COUNTRY> <IFTA_BASE_STATE>AL</IFTA_BASE_STATE> <IFTA_STATUS_CODE>0 </IFTA_STATUS_CODE> <IFTA_STATUS_DATE>2009-01-01</IFTA_STATUS_DATE> <IFTA_ISSUE_DATE>2009-01-01</IFTA_ISSUE_DATE> <IFTA_EXPIRE_DATE>2009-12-01</IFTA_EXPIRE_DATE> <IFTA_UPDATE_DATE>2008-12-30</IFTA_UPDATE_DATE> <NAME_TYPE>LG</NAME_TYPE> <NAME>K D L TRUCKING INC</NAME> <ADDRESS_TYPE>PH</ADDRESS_TYPE> <STREET_LINE_1>200 MARTIN LANE</STREET_LINE_1> <CITY>OHATCHEE</CITY> <STATE>AL</STATE> <ZIP_CODE>36271</ZIP_CODE> <COUNTY>CALHOUN COUNTY</COUNTY> <COUNTRY>US</COUNTRY> </IFTA_ACCOUNT> <IFTA_ACCOUNT> <IFTA_CARRIER_ID_NUMBER>705</IFTA_CARRIER_ID_NUMBER> <IFTA_LICENSE_NUMBER>631227666</IFTA_LICENSE_NUMBER> <IFTA_BASE_COUNTRY>US</IFTA_BASE_COUNTRY> <IFTA_BASE_STATE>AL</IFTA_BASE_STATE> <IFTA_STATUS_CODE>0 </IFTA_STATUS_CODE> <IFTA_STATUS_DATE>2009-01-01</IFTA_STATUS_DATE> <IFTA_ISSUE_DATE>2009-01-01</IFTA_ISSUE_DATE> <IFTA_EXPIRE_DATE>2009-12-01</IFTA_EXPIRE_DATE> <IFTA_UPDATE_DATE>2008-12-30</IFTA_UPDATE_DATE> <NAME_TYPE>LG</NAME_TYPE> <NAME>K D L TRUCKING INC</NAME> <ADDRESS_TYPE>MA</ADDRESS_TYPE> <STREET_LINE_1>200 MARTIN LANE</STREET_LINE_1> <CITY>OHATCHEE</CITY> <STATE>AL</STATE> <ZIP_CODE>36271</ZIP_CODE> <COUNTRY>US</COUNTRY> </IFTA_ACCOUNT> </T0019> I have taken first two records from generated XSLT. With the use of XSLT I have tried lot to group record on basis of IFTA_LICENSE_NUMBER,IFTA_BASE_COUNTRY,IFTA_BASE_ST ATE,NAME_TYPE,ADDRESS_TYPE but i failed to generated XML like this.. <?xml version="1.0" encoding="UTF-8" ?> <T0019> <IFTA_ACCOUNT> <IFTA_CARRIER_ID_NUMBER>705</IFTA_CARRIER_ID_NUMBER> <IFTA_BASE_COUNTRY>US</IFTA_BASE_COUNTRY> <IFTA_BASE_STATE>AL</IFTA_BASE_STATE> <IFTA_LICENSE_NUMBER>631227666</IFTA_LICENSE_NUMBER> <IFTA_STATUS_CODE>0</IFTA_STATUS_CODE> <IFTA_STATUS_DATE>2009-01-01</IFTA_STATUS_DATE> <IFTA_ISSUE_DATE>2009-01-01</IFTA_ISSUE_DATE> <IFTA_EXPIRE_DATE>2009-12-01</IFTA_EXPIRE_DATE> <IFTA_UPDATE_DATE>2008-12-30</IFTA_UPDATE_DATE> <IFTA_NAME> <NAME_TYPE>LG</NAME_TYPE> <NAME>K D L TRUCKING INC</NAME> <IFTA_ADDRESS> <ADDRESS_TYPE>PH</ADDRESS_TYPE> <STREET_LINE_1>200 MARTIN LANE</STREET_LINE_1> <STREET_LINE_2 /> <CITY>OHATCHEE</CITY> <STATE>AL</STATE> <ZIP_CODE>36271</ZIP_CODE> <COUNTY>CALHOUN COUNTY</COUNTY> <COUNTRY>US</COUNTRY> </IFTA_ADDRESS> <IFTA_ADDRESS> <ADDRESS_TYPE>MA</ADDRESS_TYPE> <STREET_LINE_1>200 MARTIN LANE</STREET_LINE_1> <STREET_LINE_2 /> <CITY>OHATCHEE</CITY> <STATE>AL</STATE> <ZIP_CODE>36271</ZIP_CODE> <COUNTY /> <COUNTRY>US</COUNTRY> </IFTA_ADDRESS> </IFTA_NAME> </IFTA_ACCOUNT> </T0019>

Read the article

SetWindowHookEx and execution blocking

- by Kalaz

Hello, I just wonder... I mainly use .NET but now I started to investigate WINAPI calls. For example I am using this piece of code to hook to the API functions. It starts freezing, when I try to debug the application... using System; using System.Diagnostics; using System.Runtime.InteropServices; using System.Threading; using System.Windows.Forms; public class Keyboard { private const int WH_KEYBOARD_LL = 13; private const int WM_KEYDOWN = 0x0100; private static LowLevelKeyboardProc _proc = HookCallback; private static IntPtr _hookID = IntPtr.Zero; public static event Action<Keys,bool, bool> KeyDown; public static void Hook() { new Thread(new ThreadStart(()=> { _hookID = SetHook(_proc); Application.Run(); })).Start(); } public static void Unhook() { UnhookWindowsHookEx(_hookID); } private static IntPtr SetHook(LowLevelKeyboardProc proc) { using (Process curProcess = Process.GetCurrentProcess()) using (ProcessModule curModule = curProcess.MainModule) { return SetWindowsHookEx(WH_KEYBOARD_LL, proc, GetModuleHandle(curModule.ModuleName), 0); } } private delegate IntPtr LowLevelKeyboardProc( int nCode, IntPtr wParam, IntPtr lParam); private static IntPtr HookCallback( int nCode, IntPtr wParam, IntPtr lParam) { if (nCode >= 0 && wParam == (IntPtr)WM_KEYDOWN) { int vkCode = Marshal.ReadInt32(lParam); Keys k = (Keys) vkCode; if (KeyDown != null) { KeyDown.BeginInvoke(k, IsKeyPressed(VirtualKeyStates.VK_CONTROL), IsKeyPressed(VirtualKeyStates.VK_SHIFT),null,null); } } return CallNextHookEx(_hookID, nCode, wParam, lParam); } private static bool IsKeyPressed(VirtualKeyStates virtualKeyStates) { return (GetKeyState(virtualKeyStates) & (1 << 7))==128; } [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr SetWindowsHookEx(int idHook, LowLevelKeyboardProc lpfn, IntPtr hMod, uint dwThreadId); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool UnhookWindowsHookEx(IntPtr hhk); [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr CallNextHookEx(IntPtr hhk, int nCode, IntPtr wParam, IntPtr lParam); [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] private static extern IntPtr GetModuleHandle(string lpModuleName); [DllImport("user32.dll")] static extern short GetKeyState(VirtualKeyStates nVirtKey); } enum VirtualKeyStates : int { VK_LBUTTON = 0x01, VK_RBUTTON = 0x02, VK_CANCEL = 0x03, VK_MBUTTON = 0x04, // VK_XBUTTON1 = 0x05, VK_XBUTTON2 = 0x06, // VK_BACK = 0x08, VK_TAB = 0x09, // VK_CLEAR = 0x0C, VK_RETURN = 0x0D, // VK_SHIFT = 0x10, VK_CONTROL = 0x11, VK_MENU = 0x12, VK_PAUSE = 0x13, VK_CAPITAL = 0x14, // VK_KANA = 0x15, VK_HANGEUL = 0x15, /* old name - should be here for compatibility */ VK_HANGUL = 0x15, VK_JUNJA = 0x17, VK_FINAL = 0x18, VK_HANJA = 0x19, VK_KANJI = 0x19, // VK_ESCAPE = 0x1B, // VK_CONVERT = 0x1C, VK_NONCONVERT = 0x1D, VK_ACCEPT = 0x1E, VK_MODECHANGE = 0x1F, // VK_SPACE = 0x20, VK_PRIOR = 0x21, VK_NEXT = 0x22, VK_END = 0x23, VK_HOME = 0x24, VK_LEFT = 0x25, VK_UP = 0x26, VK_RIGHT = 0x27, VK_DOWN = 0x28, VK_SELECT = 0x29, VK_PRINT = 0x2A, VK_EXECUTE = 0x2B, VK_SNAPSHOT = 0x2C, VK_INSERT = 0x2D, VK_DELETE = 0x2E, VK_HELP = 0x2F, // VK_LWIN = 0x5B, VK_RWIN = 0x5C, VK_APPS = 0x5D, // VK_SLEEP = 0x5F, // VK_NUMPAD0 = 0x60, VK_NUMPAD1 = 0x61, VK_NUMPAD2 = 0x62, VK_NUMPAD3 = 0x63, VK_NUMPAD4 = 0x64, VK_NUMPAD5 = 0x65, VK_NUMPAD6 = 0x66, VK_NUMPAD7 = 0x67, VK_NUMPAD8 = 0x68, VK_NUMPAD9 = 0x69, VK_MULTIPLY = 0x6A, VK_ADD = 0x6B, VK_SEPARATOR = 0x6C, VK_SUBTRACT = 0x6D, VK_DECIMAL = 0x6E, VK_DIVIDE = 0x6F, VK_F1 = 0x70, VK_F2 = 0x71, VK_F3 = 0x72, VK_F4 = 0x73, VK_F5 = 0x74, VK_F6 = 0x75, VK_F7 = 0x76, VK_F8 = 0x77, VK_F9 = 0x78, VK_F10 = 0x79, VK_F11 = 0x7A, VK_F12 = 0x7B, VK_F13 = 0x7C, VK_F14 = 0x7D, VK_F15 = 0x7E, VK_F16 = 0x7F, VK_F17 = 0x80, VK_F18 = 0x81, VK_F19 = 0x82, VK_F20 = 0x83, VK_F21 = 0x84, VK_F22 = 0x85, VK_F23 = 0x86, VK_F24 = 0x87, // VK_NUMLOCK = 0x90, VK_SCROLL = 0x91, // VK_OEM_NEC_EQUAL = 0x92, // '=' key on numpad // VK_OEM_FJ_JISHO = 0x92, // 'Dictionary' key VK_OEM_FJ_MASSHOU = 0x93, // 'Unregister word' key VK_OEM_FJ_TOUROKU = 0x94, // 'Register word' key VK_OEM_FJ_LOYA = 0x95, // 'Left OYAYUBI' key VK_OEM_FJ_ROYA = 0x96, // 'Right OYAYUBI' key // VK_LSHIFT = 0xA0, VK_RSHIFT = 0xA1, VK_LCONTROL = 0xA2, VK_RCONTROL = 0xA3, VK_LMENU = 0xA4, VK_RMENU = 0xA5, // VK_BROWSER_BACK = 0xA6, VK_BROWSER_FORWARD = 0xA7, VK_BROWSER_REFRESH = 0xA8, VK_BROWSER_STOP = 0xA9, VK_BROWSER_SEARCH = 0xAA, VK_BROWSER_FAVORITES = 0xAB, VK_BROWSER_HOME = 0xAC, // VK_VOLUME_MUTE = 0xAD, VK_VOLUME_DOWN = 0xAE, VK_VOLUME_UP = 0xAF, VK_MEDIA_NEXT_TRACK = 0xB0, VK_MEDIA_PREV_TRACK = 0xB1, VK_MEDIA_STOP = 0xB2, VK_MEDIA_PLAY_PAUSE = 0xB3, VK_LAUNCH_MAIL = 0xB4, VK_LAUNCH_MEDIA_SELECT = 0xB5, VK_LAUNCH_APP1 = 0xB6, VK_LAUNCH_APP2 = 0xB7, // VK_OEM_1 = 0xBA, // ';:' for US VK_OEM_PLUS = 0xBB, // '+' any country VK_OEM_COMMA = 0xBC, // ',' any country VK_OEM_MINUS = 0xBD, // '-' any country VK_OEM_PERIOD = 0xBE, // '.' any country VK_OEM_2 = 0xBF, // '/?' for US VK_OEM_3 = 0xC0, // '`~' for US // VK_OEM_4 = 0xDB, // '[{' for US VK_OEM_5 = 0xDC, // '\|' for US VK_OEM_6 = 0xDD, // ']}' for US VK_OEM_7 = 0xDE, // ''"' for US VK_OEM_8 = 0xDF, // VK_OEM_AX = 0xE1, // 'AX' key on Japanese AX kbd VK_OEM_102 = 0xE2, // "<>" or "\|" on RT 102-key kbd. VK_ICO_HELP = 0xE3, // Help key on ICO VK_ICO_00 = 0xE4, // 00 key on ICO // VK_PROCESSKEY = 0xE5, // VK_ICO_CLEAR = 0xE6, // VK_PACKET = 0xE7, // VK_OEM_RESET = 0xE9, VK_OEM_JUMP = 0xEA, VK_OEM_PA1 = 0xEB, VK_OEM_PA2 = 0xEC, VK_OEM_PA3 = 0xED, VK_OEM_WSCTRL = 0xEE, VK_OEM_CUSEL = 0xEF, VK_OEM_ATTN = 0xF0, VK_OEM_FINISH = 0xF1, VK_OEM_COPY = 0xF2, VK_OEM_AUTO = 0xF3, VK_OEM_ENLW = 0xF4, VK_OEM_BACKTAB = 0xF5, // VK_ATTN = 0xF6, VK_CRSEL = 0xF7, VK_EXSEL = 0xF8, VK_EREOF = 0xF9, VK_PLAY = 0xFA, VK_ZOOM = 0xFB, VK_NONAME = 0xFC, VK_PA1 = 0xFD, VK_OEM_CLEAR = 0xFE } It works well even if you put messagebox into the event or something that blocks execution. But it gets bad if you try to put breakpoint into the event. Why? I mean event is not run in the same thread that the windows hook is. That means that It shouldn't block HookCallback. It does however... I would really like to know why is this happening. My theory is that Visual Studio when breaking execution temporarily stops all threads and that means that HookCallback is blocked... Is there any book or valuable resource that would explain concepts behind all of this threading?

Read the article

Apple iPhone 4S Launch In India On Nov 25

- by Gopinath

Aircel, one of the leading wireless mobile services provider of India has just announced that iPhone 4S will be available to its customers on November 25. You can start pre-booking the phone from November 18 through Aircel website or walking into an Aircel showroom near you. My multiple calls to Aircel customer care division were no use to get the details on the price information. Three times the call got disconnected before a customer care executive tried fetching the details on price and models. We hear from BGR India blog that iPhone 4S price is going start at Rs. 40,000 for a 16GB model and may go up to Rs. 50,000 for a 64 GB model. Airtel, another leading mobile service provider in India, who sells iPhone in India is not sure when they are going to start offering iPhone 4S to its customer. I reached customer care regarding the iPhone 4S and they don’t have any details to offer at the moment. It’s good to see Apple releasing iPhone 4S to India markets just after couple of months of International release. Apple was earlier criticized for releasing iPhone 2, iPhone 3G in India almost an year after the international launch while companies like Nokia release their flagship models just after weeks of international launch. One of the most sought after feature of iPhone 4S is Siri and my friends in US told that it works amazingly good. Siri does not have any problem in understanding Indian English accent and it is very good at recognizing the Indian names in contacts list. But at the same time we do hear reports that Siri does not help much if it’s used outside USA. Considering that Siri is a software it should be possible for Apple to improve it to work better outside USA. But who know the priorities of Apple! This article titled,Apple iPhone 4S Launch In India On Nov 25, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Buy iPhone 4 Without Contract: $599 (AT&T) and $699 (Verizon)

- by Gopinath

Purchasing iPhone without a contract is a good option when you are planning to gift it to someone or going to use it outside US. Both AT&T and Verizon lets you iPhone 4 without a contract but this information is buried deep under blurred text in FAQs and agreements. Here is the pricing information of AT&T and Verizon iPhone 4 without contract AT&T iPhone 4 16 GB without contract – $599.99 AT&T iPhone 4 32 GB without contract – $699.99 Verizon iPhone 4 16 GB without contract – $649.99 Verizon iPhone 4 32 GB without contract – $749.99 This information is seen on the bottom of Apple’s iPhone purchase page and on Verizon’s frequently asked questions about the iPhone 4 page. Screenshots embedded below I live in India and I’m happy to know the price at which I can buy an authentic iPhone 4 without contract . Now I can ask my friends to gift an iPhone 4 for me iphone cc image credit: flickr/williamhook This article titled,Buy iPhone 4 Without Contract: $599 (AT&T) and $699 (Verizon), was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

What’s New In Microsoft Security Essentials 2.0 And How To Upgrade To 2.0

- by Gopinath

Since Microsoft released Microsoft Security Essentials(MSE) couple of years ago, I stopped worrying about antivirus programs on all my Windows PCs. MSE is just awesome and it’s the best free antivirus available in the market. Microsoft released version 2.0 of MSE yesterday with enhanced security features and more love for Windows users. New features introduced in this version are New protection engine - Heuristic scanning engine is introduced to bump the virus detection and cleaning mechanism. Network inspection system to monitor network traffic as we browse and protects us from malicious scripts and programs. Better integration with Windows Firewall With this upgrade, MSE is irresistible antivirus application to have on every Windows PC. How To Upgrade MSE 1.0 to 2.0 Generally upgrading Microsoft applications are kids play. All one would require to upgrade is to go to Help->Check for upgrades menu option and follow the wizard to complete upgrade process. Microsoft Security Essentials 1.0 to 2.0 upgrade is also expected to be this way, but somehow it’s not working for me in India. May be I guess, MSE 2.0 is not released for Indian users. What ever may be the reason, it’s very easy to upgrade MSE 1.0 to 2.0 manually. Just download the installer from Microsoft(link given below) and run the installer. Choose Upgrade option when the installer is executing to have MSE 2.0 installed on your PC. MSE 2.0 Download Link You can download Microsoft Security Essentials 2.0 at Microsoft Download Center. This article titled,What’s New In Microsoft Security Essentials 2.0 And How To Upgrade To 2.0, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Search Results

Search found 13642 results on 546 pages for 'us'.

Page 31/546 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38 | Next Page >

- by Mark Amery

- by Spirit

- by DigiMortal

- by Martin Hinshelwood

- by pinaldave

- by user715249

- by Laila

- by david.talamelli

- by dapostolov

- by Johnm

- by Oracle OpenWorld Blog Team

- by Max

- by Max

- by Michael Williamson

- by Maria Sandu

- by Maria Sandu

- by Tim Murphy

- by Lostsoul

- by HCM-Oracle

- by Raul

- by Nisarg Mehta

- by Kalaz

- by Gopinath

- by Gopinath

- by Gopinath

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38 | Next Page >