Search Results

Search found 4396 results on 176 pages for 'wireless extender'.

Page 31/176 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• Can't ping other machines in my network

  - by judahgabriel

  I've got 3 machines on my network, all running Windows 7. None of them can ping each other, can't see each other on the network, can't see shares, can't remote desktop, can't see any homegroups. They are all on the same workgroup. They are all connected to the same wireless, WPA2 secured network. They all worked together nicely until I added a password to my wireless network. After that, and after reconnecting all the machines to the password-protected network, they can't see each other. Any ideas what could be wrong?

  Read the article

• logitech unifying receiver

  - by Plastkort

  hi! I am having multiple logitech devices, and each and one of them seem to have theire own receiver, occupying USB ports.. I read upon Logitech unifying receiver, and it seem to connect multiple wireless devices from logitech, however I wonder if I just buy this one receiver, will I be able to connect my existing wireless devices, or will I be forced to buy new keyboard and mouse in order to use the unifying receiver? hope anyone here have the answer so I dont need to spend money on something I cannot use.. :) I got PC 1 Logitech Dinovo Edge keyboard Logitech MX Air mouse PC 2 Logitech Dinovo Keyboard Logitech VX mouse

  Read the article

• My Router is fast when i reset it but slows down seconds later

  - by hglocke

  I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

  Read the article

• What Media Extender / Centre Set up should I use?

  - by Bryn Hird

  I have installed cat6 throughout the house which I use for telephony and network. In my cellar I have a NAS Server, gigabit switch and I want to install a Media Centre to stream my video's, music, photo's and live TV (coax from the aerial to the cellar) over the cat6. Yeah I know I can get stuff on the internet but shared experience of watching TV as a family as it happens is a big plus for live TV. I'm aiming for 1080p. I want different users to be able to watch different channels. Max users = 4. I've played a little with Windows Media Centre, works fine with live TV. Likewise I have XBMC up and running with live TV. The issue I have is what do I put near the TV. I'd like a consistent user interface (grandma and the the other technophobes in the house are continually pestering me on how to use different TVs, change channel, inputs etc.) so a key part of this for me is to make the user experience the same and simple i.e. no keyboards / PCs hanging around the TV. I've just bought a Linksys DMA 2200 to test the Windows Media Centre, but obviously off eBay as they're a dying breed. And with Windows Media Centre removed from Microsoft plans such devices will get rarer. And as for 1080p, think I can forget it with that set up. I have tested XBOX 360, also works but ditto on Microsoft plans for WMC. I was thinking of a WD Live TV to test the XMBC setup. Now to the question. Any advice on Media Centre / Extender setups that will do the job as above and have some degree of futureproofing (building my own with my Raspberry PI is a last resort). I'd like to understand the standards involved in the futureproofing if anyone knows (DNLA, RVU etc.).

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• How to specify Wireless or Bluetooth in GameKit when using my own custom interface

  - by DonnaLea

  Hi, I've decided to implement my own interface for connecting two devices running my game, as opposed to using the GKPeerPickerController. This is actually working quite well. But I just realised that in my creating of the GKSession I'm not actually specifying whether the connection should be Wireless or Bluetooth. I have an option in my interface to let the user specify which connection method they'd like to use. How do I tell GKSession whether I want it to connect via Bluetooth or Wireless? I think what is currently happening is that it defaults to Wireless if wireless is enabled otherwise it uses Bluetooth. But I'd like to let the user specify which connection method, is this possible? Thanks, Donna

  Read the article

• Wireless Network Disappearing From Available Networks (Windows 7)

  - by PeteDaMeat

  I have been using Windows 7 with a BT Voyager wireless adapter to connect to my home wireless network for around the last 6 months or so and until recently have experienced no problems. However, over the last couple of days Windows has been unable to connect to the network and the network name is no longer visible in the list of available wireless networks. The only way I have got round the problem is to reboot the NetGear router and to change the SSID to a network name which has not already been used. I do not believe the problem is with the router as my mobile phone can connect to it without any problems. The BT Voyager wireless adapter detects all other available networks so I presume this is a Windows 7 issue as it seems to occur when the PC is rebooted. This problen has happened twice in the last 2 days and is becoming extremely annoying. Does anyone have any suggestions?

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Wireless AP Placement and Digramming

  - by Matt Simmons

  I'm trying to research the best placement of wireless APs in a given space, and I'm running into problems in gathering information. I found (what I thought was) a great source in this tech republic article: http://techrepublic.com.com/5206-6230-0.html?forumID=82&threadID=163120 While this diagram seems detailed and overall very informative, there were a lot of comments talking about how it was lacking in things like "wire racks, microwaves, concrete walls, motors..." etc. Maybe I'm rash, but I just sort of looked around my office (which is, albeit, somewhat smaller than the one diagrammed), and went "uhhh, there", and hooked up the AP. It seems to cover everywhere. I imagine if my office quadrupled in size, I'd logically divide it up and put four APs in, with a similar amount of thought devoted to each. So, suppose I had a much more complex office. What tools (both diagramming and surveying) do you use to plan your AP placement?

  Read the article

• Setting up a wireless network with Verizon MiFi

  - by winarm

  I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

  Read the article

• Wireless and Wired Network Access at same time?

  - by grasper

  At work, I use a laptop. It is a Dell Latitude D630 with Windows XP. I work in a lab environment where I need to use the Ethernet Port as a Static IP to interact with a local network (which cannot talk to the outside world). What I would like to do is use the Wireless as the internet connection so i can check email, etc at the same time I am using the ethernet network... It seems like this is not possible. Is there a piece of software or a way to configure it to allow me to do this?

  Read the article

• How to emulate wireless in Virtualbox?

  - by huahsin68

  I have WinXP install in virtualbox which host in Linux. I have a TP-Link (TP-WN321G) USB wifi adapter and have the driver installed inside WinXP. When I plug-in the wifi adapter, there is an option show "Ralink 802.11g WLAN [0101]" in the virtualbox's USB icon, tick on that option, the Device Manager able to detect the hardware which shows TP-Link, but when look into the properties, it says there is no driver was install. I did try to install Ralink driver but still no luck. Just curious why my wifi adapter is TP-Link, but the option show Ralink? May I know how can I emulate the wireless network inside WindowsXP?

  Read the article

• Packet loss with Broadcom wireless and Ubuntu

  - by stevemegson

  I have a machine with Ubuntu 9.04 and a Broadcom BCM4306 wireless card which has been running quite happily for many months with the b43legacy driver that's suggested by Hardware Drivers. Suddenly, I'm now seeing crippling packet loss, varying between 30% and 90% when pinging the router. My WinXP machine is still quite happy even when sat next to the Ubuntu box, so I assume that it's not some new source of interference. What else is likely to have changed? How should I go about diagnosing and fixing this?

  Read the article

• Setting up a wireless access point with Ubuntu server

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

  Read the article

• Slower than expected 802.11n wireless network speeds

  - by Ian

  I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

  Read the article

• Recommend a wireless PCI card for Windows 7

  - by Dan

  I have a crummy RT2500-based 11g card which does work in Win7 with the Vista driver (3.2.0.0) but it dies about every two hours or so. Googling around has led me to conclude that Ralink drivers are basically borked, and that I need something else for a stable connection. Can anyone recommend a suitable wireless adapter? It needs to be: 802.11g - draft-N nice but not at all essential. PCI - I already have far more USB devices than can possibly be good for me. Very reliable. Money isn't an object within reason. All input gratefully received!

  Read the article

• Slower wireless speed in Ubuntu 12.04 (64-bit) on Asus USB-N13

  - by PhantonTurtle

  I have an Asus USB-N13 which I use for wireless internet on my desktop. The download speed I get on Windows 7 (dual-boot) is 15.22 Mbps. On Ubuntu 12.04 (64-bit) I can only get 1.09 Mbps. I asked a question about this on the Ubuntu forums as well, but I did not get an answer. Here is the output from lsmod | grep rt which gives me, parport_pc 32866 0 rtl8192cu 103297 0 rtl8192c_common 75767 1 rtl8192cu rtlwifi 111202 1 rtl8192cu mac80211 506816 3 rtl8192cu,rtl8192c_common,rtlwifi cfg80211 205544 2 rtlwifi,mac80211 parport 46562 3 parport_pc,ppdev,lp I installed the drivers from Realtek (my chipset is Realtek, not Ralink) but that did not work.

  Read the article

• DIR 601 No wireless internet

  - by ashley

  I have an orange globe on my d link router. I signed into 192.168.0.1 and went to Manuel Internet Connection Setup as I was told to do. When I clicked on that and tried to clone my PC's MAC address, it said invalid MAC address. Host Name : DIR-601 Use Unicasting : (compatibility for some DHCP Servers) Primary DNS Address : 0.0.0.0 Secondary DNS Address : 0.0.0.0 MTU : (bytes) MTU default = 1500 MAC Address : F8:1E:DF:EA:38:E6 How do I get a valid MAC address so I can save the settings and move on to the next steps I was told to do in order to get wireless internet again?

  Read the article

• Buffalo wireless router

  - by Walter White

  Hi all, I have a Buffalo wireless router and it appears to work fine, for the most part. However, printing out some debug information, I noticed that the Mode is reported as unknown/bug. In the DD-WRT configuration, I have selected AP which should be Master. I was having a problem earlier with my ESSID being a bunch of weird characters. I re-entered it and restarted the router and now the ESSID is correct. I tried re-entering the configuration for the router and it still is reported back as Unknown/bug via iwlist wlan0 scanning. Any ideas? Walter

  Read the article

• Macbook cannot see specific wireless network after being connected to it for a while

  - by donut

  Okay, so there's a single wireless network that my laptop has troubles with. My Macbook Pro used to be fine with it until it changed to using channel 13 (or 11?). Since then, after being connected to it for a while it disappears from my laptop's view. Other networks are showing up fine and other computers (including several Macs) have no troubles connecting to this network. If I clear my system cache using Onyx and then restart (sometimes a couple times) my laptop can see and connect to it again. But it seems that if I disconnect and try reconnecting I have to clear my cache again. One thing to note is that if I put my computer to sleep while connected to this network it has no problems reconnecting on wake up. I've got a 15" Macbook Pro 2,2 with Leopard 10.5.8.

  Read the article

• CELLPHONE's wifi makes my wireless router disconnect Plz Help me

  - by wifiprobodude

  Hey guys i have a problem. For 7 months now, i have been dealing with internet problems. But i finally found out why my wireless router has been disconnecting randomly. Everytime I enable wifi on my cellphone, my whole router disconnects and lose internet untill i swtich the wifi off on my phone. I dont understand why this is doing this Can anyone help has this happend to you? htc android-wifi everyday-problems And Just to findout it happens with all wifi devices?

  Read the article

• Connect a Sitecom WL-174 to another wireless router

  - by Thijs Wouters

  I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

  Read the article

• msi netbook refuses to connect to home wireless network (windows xp)

  - by sa125

  Hi - I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• MSI netbook refuses to connect to home wireless network with Windows XP

  - by sa125

  I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• Connection two wireless ADSL routers to share IPs

  - by user35218

  I have two wireless ADSL routers sitting right next to each other, each with his own internet connection. I'd like to be able to connect to a computer that is connected to router A from a computer that is connected to router B, while keeping both routers internet connection individually. i.e. If computer A is connected to router A, it will use router A internet connection, and a second computer, call it B, will be connected to router B, and will use router B internet connection. Is this possible?

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >