Search Results

Search found 89616 results on 3585 pages for 'working set'.

Page 31/3585 | < Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >

• lirc_zilog IR transmission no longer working with HD-PVR on 12.04

  - by johnf

  I have been running a ubuntu 10.04 with a patched version of lirc_zilog for two years. I upgraded to 12.04 and lirc_zilog is no longer working with my HD-PVR. The MythTV wiki reports that it did work out of the box with 11.04. The error message I get on irsend is as follows: johnf@carbon:~$ /usr/local/bin/irsend SEND_ONCE blaster 0_130_KEY_POWER irsend: command failed: SEND_ONCE blaster 0_130_KEY_POWER irsend: hardware does not support sending The lircd daemon, run interactively, reports the following: lircd: accepted new client on /var/run/lirc/lircd lircd: could not get hardware features lircd: this device driver does not support the LIRC ioctl interface lircd: major number of /dev/lirc0 is 250 lircd: LIRC major number is 61 lircd: check if /dev/lirc0 is a LIRC device lircd: WARNING: Failed to initialize hardware lircd: error processing command: SEND_ONCE blaster 0_130_KEY_POWER lircd: hardware does not support sending lircd: removed client Checking dmesg seems to indicate that the kernel module is loading properly: [56497.730743] lirc_zilog: module is from the staging directory, the quality is unknown, you have been warned. [56497.730999] lirc_zilog: Zilog/Hauppauge IR driver initializing [56497.732484] lirc_zilog: ir_probe: ir_rx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x71 [56497.732493] lirc_zilog: ir_probe: ir_tx_z8f0811_hdpvr on i2c-0 (Hauppage HD PVR I2C), client addr=0x70 [56497.732496] lirc_zilog: probing IR Tx on Hauppage HD PVR I2C (i2c-0) [56497.756822] lirc_zilog: firmware of size 302355 loaded [56497.756945] lirc_zilog: 743 IR blaster codesets loaded [56497.757030] i2c i2c-0: lirc_dev: driver lirc_zilog registered at minor = 0 [56497.757033] lirc_zilog: IR unit on Hauppage HD PVR I2C (i2c-0) registered as lirc0 and ready [56497.757035] lirc_zilog: probe of IR Tx on Hauppage HD PVR I2C (i2c-0) done [56497.757056] lirc_zilog: initialization complete Here is my /etc/lirc/hardware.conf #Chosen IR Transmitter TRANSMITTER="HD-PVR" TRANSMITTER_MODULES="lirc_dev lirc_zilog" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="/dev/lirc0" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" My lircd.conf is a copy of the recommended one. Examination of the kernel source seems to indicate that the lirc_zilog module should support transmission, it's newer than the patched version I was manually compiling on 10.04. I was previously using a manually built version of lirc 0.8.7 and not the packaged one. I'm now running the packaged version 9.0. I can provide any additional information required and will perform tests quickly. I'm very eager to get this issue resolved.

  Read the article

• Wifi not working on Acer Aspire One D270

  - by Dani

  brand new baby linux user here, never used Ubuntu or any other linux OS before, so be gentle and use short words! I installed Ubuntu 12.04 on my new Acer Aspire One D270-F61C/KF netbook (it's a Japanese computer which had Japanese windows preinstalled, and I decided to take the plunge and try Ubuntu because English Windows costs the earth and stars). Wifi isn't working; I enter my wireless password, it tries to connect for a while, then asks for my password again. And KEEPS ASKING, every few minutes. Wired connection works fine. Wireless card is a Broadcom BCM4313; I have the "additional drivers" checked and installed (I tried unchecking and then reinstalling them in case that would help, no joy, and now my home wifi connection isn't showing up in the list of available connections, argh). I've done a lot of googling and I gather there's a lot of issues with Broadcom cards, but some of the answers are for earlier ubuntu builds and many of them are a bit confusing for a new user. I gather I need to try installing some new drivers other than the proprietary ones provided, but I'm having trouble figuring out how that's done. Anyone got some simple, step by step instructions for me? Please bear in mind, TOTAL N00B. (EDIT): OKAY, got it fixed finally; after suggestions on the Ubuntu forums and messing around with drivers, what finally worked was installing Wicd. Not... using Wicd, for some reason, just installing it fixed it. ...I CHOOSE NOT TO QUESTION IT.

  Read the article

• Working with Reporting Services Filters – Part 2: The LIKE Operator

  - by smisner

  In the first post of this series, I introduced the use of filters within the report rather than in the query. I included a list of filter operators, and then focused on the use of the IN operator. As I mentioned in the previous post, the use of some of these operators is not obvious, so I'm going to spend some time explaining them as well as describing ways that you can use report filters in Reporting Services in this series of blog posts. Now let's look at the LIKE operator. If you write T-SQL queries, you've undoubtedly used the LIKE operator to produce a query using the % symbol as a wildcard for multiple characters like this: select * from DimProduct where EnglishProductName like '%Silver%' And you know that you can use the _ symbol as a wildcard for a single character like this: select * from DimProduct where EnglishProductName like '_L Mountain Frame - Black, 4_'   So when you encounter the LIKE operator in a Reporting Services filter, you probably expect it to work the same way. But it doesn't. You use the * symbol as a wildcard for multiple characters as shown here: Expression Data Type Operator Value [EnglishProductName] Text Like *Silver* Note that you don’t have to include quotes around the string that you use for comparison. Books Online has an example of using the % symbol as a wildcard for a single character, but I have not been able to successfully use this wildcard. If anyone has a working example, I’d love to see it!

  Read the article

• Unity-Animation parameters are not being set

  - by user1814893

  I have the following animation controller: with two parameters of walkingSpeed and Jump. I have the following code which should change the values: animator.SetFloat("walkingSpeed",0.9f); animator.SetBool("Jump",true); and animator is the correctly referenced animator object. However the values that the parameters are set to do not appear to change in the animator window, nor do they appear to impact what is happening on the screen. However they do seem to impact the values obtained when doing the following: animator.GetFloat("walkingSpeed"); The animator consists of the shown blend tree, which works correctly and is always active, however due to the values not being changed it does not blends, and always acts as if the value with which it blends (walkingSpeed is 0). What is going on?

  Read the article

• Nvidia 740M still not working after Bumblebee installation

  - by Jon

  first of all, I have checked a lot of similar topics, but I still can't get my laptop to use Nvidia 740M. So first things first. I have a laptop Asus X550V(i5-3230, 4gb RAM, Nvidia 740M + Intel HD4000). I installed Ubuntu 13.10 alongside Win8(preinstalled) and both systems are running without problems. However, I have problem with second graphic card(Nvidia 740M), as Ubuntu doesn't recognize it. I installed bumblebee with this tutorial https://wiki.ubuntu.com/Bumblebee#Installation, but I still get error "Cannot access secondary GPU" error when trying to run ''optirun Steam'' in terminal. Then I tried to do this: [ERROR]Cannot access secondary GPU - error: [XORG] (EE) No devices detected. you need to edit the /etc/bumblebee/xorg.conf.nvidia (or /etc/bumblebee/xorg.conf.nouveau if using the noveau driver) and specify the correct BusID by following the instructions therein. But with lspci / VGA i get only info about Intel 4000, but no Nvidia. When I type only lspci, I get the line for Nvidia 740M,but after I edit the config file I still get second card error. Also, in /etc/bumblebee/xorg.conf.nvidia there wasn't BusID or anything similar, so I just added the whole line in device section. As I sad, I tried a lot of things to get it working, avoiding this forum(as I din't want to bother people with some solutions possible), but alas!, I had to bother you. If there is a need for some additional info, just say, no problem at all. Thank you very much in advance. :)

  Read the article

• C printf not working on ubuntu 13.10 terminal

  - by Blaze Tama

  First, im new in ubuntu so please bear with me. I need to create a C based program for a course in my university. I was using opensuse and its konsole when i was in the university's lab. So basically i need to install opensuse on my system or using a vmware. But i feel lazy to do that, so i tried to run it on my ubuntu instead of opensuse. However, no C code seems working on ubuntu's terminal. The compiling is success, but its not running, or at least the printf is not running. This is my code, a very very simple one : #include<stdio.h> #include<unistd.h> #include<stdlib.h> int main() { printf("test"); return 0; } When i compile it with gcc test.c -o test everything work fine and i get an executeable file. Then i try to run it by ./test, but the printf is not printed. No error or warning was shown. Am i missing something? Note : my gcc is the new one, it should has no problem. Thanks for your help :D

  Read the article

• Internal Mic not working on Dell Adamo 13

  - by AFD

  So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

  Read the article

• How to pick a great working team?

  - by Javierfdr

  I've just finished my master and I'm starting to dig into the laboral world, i.e. learning how programming teams and technology companies work in the real world. I'm starting to design the idea of my own service or product based on free software, and I will require a well coupled, enthusiast and fluid team to build and the idea. My problem is that I'm not sure which would be the best skills to ask for a programming team of 4-5 members. I have many friends and acquaintances, with whom I've worked during my studies. Must of those ones I have in mind are very capable and smart people, with a good logic and programming base, although some of them have some characteristics that I believe that could influtiate negatively in the group: lack of communication, fear to debate ideas, hard to give when debating, lack of structured programming (testing, good commenting, previous design and analysis). Some of them have this negative characteristics, but must of them have a lot of enthusiasm, nice working skills (from an individual point of view), and ability to see the whole picture. The question is: how to pick the best team for a large scale project, with a lot of programming? Which of these negative skills do you think are just too influential? Which can be softened with good leadership? Wich good skills are to be expected? And any other opinion about social and programming skills of a programming team.

  Read the article

• How to set-up my own cloud server?

  - by WMRKameleon

  I am a student, 17 years of age and wanting to access all of my files at greatest ease. i would like to have a system like this: Computer A, B and C are the computers on which I work and to which the files should be available. Server A is located in my room and I can install Ubuntu on it. What is the goal? I want to edit files on computer A (e.g.) and computer A should update the file on my server, afterwards the server should update the files on computer B and C. (The same goes for editing files on computer B, afterwards the server has to update the files on A and C.) How am I able to set-up a network like this? It is about music, movies, pictures, documents... Thanks for those who are going to reply!

  Read the article

• Dell Alps Touchpad not working

  - by ppls

  I have a Dell 17R SE with Ubuntu 13.04. The touchpad is recognized as PS/2 mouse out of the box, giving just normal touchpad behaviour, but no tap to click, no scrolling, etc. Most answers related to that issue suggest trying an ALPS driver from dahetral.com: http://www.dahetral.com/public-download For installing I followed the steps on this page: https://www.linuxwind.org/html/dell-touchpad-driver-for-ubuntu-13-04.html Now my xinput looks like this: Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Mouse id=13 [slave pointer (2)] ? ? AlpsPS/2 ALPS GlidePoint id=14 [slave pointer (2)] ? ? Logitech Bluetooth Mouse M555b id=16 [slave pointer (2)] My touchpad isn't working at all now, just the two hardware buttons for left and right mouse buttons work. Interestingly also the tap to click functions works, but only in the address bar of nautilus, nowhere (!) else. What can I do? I would even switch back to initial state, where at least the basic touchpad functionality worked, i I knew, how to get there.

  Read the article

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• Working with fubar/refuctored code

  - by Keyo

  I'm working with some code which was written by a contractor who left a year ago leaving a number of projects with buggy, disgustingly bad code. This is what I call cowboy PHP, say no more. Ideally I'd like to leave the project as is and never touch it again. Things break, requirements change and it needs to be maintained. Part A needs to be changed. There is a bug I cannot reproduce. Part A is connect to parts B D and E. This kind of work gives me a headache and makes me die a little inside. It kills my motivation and productivity. To be honest I'd say it's affecting my mental health. Perhaps being at the start of my career I'm being naive to think production code should be reasonably clean. I would like to hear from anyone else who has been in this situation before. What did you do to get out of it? I'm thinking long term I might have to find another job. Edit I've moved on from this company now, to a place where idiots are not employed. The code isn't perfect but it's at least manageable and peer reviewed. There are a lot of people in the comments below telling me that software is messy like this. Sure I don't agree with the way some programmers do things but this code was seriously mangled. The guy who wrote it tried to reinvent every wheel he could, and badly. He stopped getting work from us because of his bad code that nobody on the team could stand. If it were easy to refactor I would have. Eventually after many 'just do this small 10minute change' situations had ballooned into hours of lost time (regardless of who on the team was doing the work) my boss finally caved in it was rewritten.

  Read the article

• Remote Desktop Viewer Set-up for 12.10

  - by Sir Linuxalot

  How do you set up the Remote Desktop in 12.10? I've scanned the available answers here and didn't find anything that answers the question considering the 12.10 interface. Specifically, advice says to check the "Allow Others to Control Your Desktop" and an IP will pop up (10.04 I believe). But when checking this in Quezal no IP shows. So how would I connect to my desktop from somewhere other than the local network, like say a coffee house? I also see this Remmina client program but have no idea if I need to use that as well. Can someone give me a step-by-step or point me to one that I haven't found yet? Thanks.

  Read the article

• Setup shortcut keys not working

  - by Tim

  In my Ubuntu 12.04, in keyboard settings, I didn't find a shortcut key for restarting X, so in "Customer Shorcut", I set up Ctrl+Alt+Backspace for command sudo restart lightdm. But after that the shortcut doesn't work. Is it because it requires root privilege? Also I have a SysRq key on my keyboard, which I think to be the "Magic SysReq Key". My SysRq key is shared with PrtSc key (for screen shoot), and is in blue which means I have to press Fn key at the same time to invoke SysRq instead of PrtSC. But every time I press Fn+SysRq, it always shoots a photo of the screen, same as just hitting PrtSc i.e. without hitting Fn. I wonder how to use the Magic SysReq Key? Does it mean the shortcut has not been linked to any command that is supposed for Magic SysReq Key yet? PS: My laptop is Lenovo T400 and OS is Ubuntu 12.04. Thanks!

  Read the article

• How to set up an inter-OS partition?

  - by Confuzzled Persun

  I need a working partition configuration for use and accessibility on both Ubuntu and Windows. I have an 8GB USB flash drive onto which I am installing Ubuntu 11.10 so that I can have a personal bootable OS wherever I go. I've installed Ubuntu several times, but I just can't seem to get this one partition right. This is my own configuration: Partition 1: Primary - 200MB - Beginning - Ext4 - /boot Partition 2: Primary - 1300MB - End - swap area Partition 3: Logical - 5200MB - Beginning - Ext4 - / Partition 4: Logical - 1258MB - Beginning - Ext4 - /home Partition 5: Logical - 42MB - End - FAT32? - /windows? What I want to do is to get partition 5 configured so I can access it on both the installed Ubuntu system and a Windows system (when the USB drive is connected while Windows is booted). Basically, what I want is Ubuntu installed on the USB drive along with a partition that I can access with other operating systems. I'm thinking I just need the technical configuration of "Use as:" and "Mount point:" for my final partition. But I don't know. Any help with this is appreciated. And any other tips are appreciated as well.

  Read the article

• Working with a company as a Junior Developer [closed]

  - by user1601973

  We all have started our careers in some way or other. Well, I am a college student based in North America & I am doing my second internship with the same company with which I did my first internship. I came back here because people here were helpful always and supportive. But it just happened today, and I wanted to share this on SO. Well since I started I have been doing documentation and that kind of stuff only as compared to my first internship in which I actually worked along with the developers & learned so many things. Well, I was in a conversation with my Team lead, and he asked me if I completed that particular work or not? Well, That particular work had slipped from my mind. He was indeed I kind of pissed, and said "You don't have to worry about it, I will figure out". Well, I felt so bad and was about to literally cry. I stopped my lunch and then went on to complete that work. I always ask for work in office, and I always try to be an asset for whoever I am working but this was the first time that it happened. What are your thoughts on this and should I apologise or not? I think I should.

  Read the article

• Detect duplicate in a subset from a set of elements

  - by Abhinav Shrivastava

  I have a set of numbers say : 1 1 2 8 5 6 6 7 8 8 4 2... I want to detect the duplicate element in subsets(of given size say k) of the above numbers... For example : Consider the increasing subsets(for example consider k=3) Subset 1 :{1,1,2} Subset 2 :{1,2,8} Subset 3 :{2,8,5} Subset 4 :{8,5,6} Subset 5 :{5,6,6} Subset 6 :{6,6,7} .... .... So my algorithm should detect that subset 1,5,6 contains duplicates.. My approach : 1)Copy the 1st k elements to a temporary array(vector) 2) using #include file in C++ STL...using unique() I would determine if there's any change in size of vector.. Any other clue how to approach this problem..

  Read the article

• Why can't I get a working session with vnc4server

  - by ysap

  We have a couple of (identical) Ubuntu 11.10 machines, configured with gnome-classic, which we use as remote servers, and let our clients log into personal user accounts we create for them using vnc4server. We configured all the machines in the same way, following a short manual we compiled, describing how to download, install and prepare a few tools and our software. The connection usually works fine, but today I set up a fresh machine, and experienced problems. After installing vnc4server, I ran vncpasswd and copied the following startup file to ~/.vnc/xstartup: #!/bin/sh unset SESSION_MANAGER unset DBUS_SESSION_BUS_ADDRESS gnome-session --session=gnome-classic & [ -x /etc/vnc/xstartup ] && exec /etc/vnc/xstartup [ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources xsetroot -solid grey vncconfig -iconic & Then, I started vnc4server and used two viewers (the Ubuntu Remote Desktop Viewer and Windows RealVNC Client) in two other machines, but instead of getting my desktop, I see an empty window with a grey-ish background pattern like this: and the cursor is a bold X. What is wrong with the setup and why don't I get a remote session as expected?

  Read the article

• Configuration of the network manager via DBus: how to set the ad hoc mode

  - by Andrea

  I have an hard nut to crack: a nice bottle of italian Chianti wine to the solver! :) To automatically configure Wifi, I first have to kill the network manager and than activate the wifi via the commandline: I do this all automatically in my application and works great. However... it is not the right way to do this. As the user has no network gui anymore to configure some other network access. A much better and transparent way would be to configure wifi directly via network manager over the DBus interface. I was able to configure it, but I wasn't able to set it to ad hoc mode... Searching the web for a while: a lot about configuration in general but nothing related to ad hoc mode. I think the only way to do figure that out is to look into the source code of the network manager...maybe someone already did it and he can answer.

  Read the article

• Trendnet tew-424ub wireless not working after update 12.10

  - by dwa

  I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

  Read the article

• How to set Qwt path to the run-time linker in Xubuntu

  - by Rahul

  I've successfully installed Qwt in Xubuntu 12.04(qmake - make - make install). But now I need to set the Qwt path to run time linker of Xubuntu. In manual it's given like - If you have installed a shared library it's path has to be known to the run-time linker of your operating system. On Linux systems read "man ldconfig" ( or google for it ). Another option is to use the LD_LIBRARY_PATH (on some systems LIBPATH is used instead, on MacOSX it is called DYLD_LIBRARY_PATH) environment variable. But being newbie to Linux environment, I'm not able to proceed further. Please help me with this.

  Read the article

• Set vertex position

  - by user1806687

  Can anyone tell me how to set the positions of model vertices? I want to be able to change the position of some of the vertices of a Model. Is there any way to make that happen? And make the changed visible at that moment. EDIT: Well, the thing is,I have a model, a cube, that is made up of four "thin" cubes(top,bottom,left side, right side), so I get this cube with "hole" in the middle. And I want to scale it on Y axis. If I do Scale(0,2,0) it will scale the whole object meaning, it will double the Y size of left and right side, but also double the size of the top and bottom cube, which I do not want. Same for X axis I want to double the size of top and bottom cubes but not the left and right one. Hope you can help

  Read the article

• Select (loop) or command not working in shell-script

  - by user208098

  I've been tinkering with Linux and Unix for years but still a novice in my mind and recently find myself trying to be more pro with it as I work in IT. So with that notion I'm studying shell scripting. I've hit a snag in ubuntu using the latest version 13.10 Saucy. When I use the select command in a sh script it doesn't work, depending on how I format the command it will either return Unexpected "do" or Unexpected "done". See the following two examples: This section of code produces an unexpected "do" error: #/bin/bash PS3='Please enter your choice' select opt in option1 option2 option3 quit do case $opt in "option1") echo "you chose choice 1" ;; "option2") echo "you chose choice 2" ;; "option3") echo "you chose choice 3" ;; "quit") break ;; *) echo invalid option ;; esac done This section of code produces an unexpected "done" error. #/bin/bash PS3='Please enter your choice' select opt in option1 option2 option3 quit ; do case $opt in "Option1") echo "you chose choice 1" ;; "Option2") echo "you chose choice 2" ;; "Option3") echo "you chose choice 3" ;; "quit") break ;; *) echo invalid option ;; esac done When I enter these parameters into the command line interactively or manually I get the desired result which is a list of choices to choose from. However when executed from a script I get the before mentioned errors. Also a side note I have tried this in Fedora as a script and it worked perfectly so my question is why isn't it working in Ubuntu, is this a difference between RHL and Debian? Or is it a bug in the latest version of Ubuntu? Thanks in advance for any help! KG

  Read the article

• Click buttons on the mouse stopped working in 12.10

  - by Kushal

  everything was great for a couple weeks after the upgrade, and then all of a sudden, the click buttons on my trackpad (as well as any other USB mouse I would hook up) stopped working. The pointer moves fine, but the clicks don't work. Sometimes the left click doesn't work but right click does, and then some times, neither works. I noticed this would begin when I would accidentally drag some text in a web browser (you know how when you try to move your pointer through the trackpad, but you accidentally tap down and it starts to drag whatever text you've selected on the window), and then you're done. The clicks won't work after that. They would work upon rebooting or logging off and back on, but then after a few minutes of usage, things would go back to being broken again. It happened a LOT when I was trying to play Scrabble on Facebook. I've raised a bug for this, but I haven't heard back anything on it. Here's the bug report: https://bugs.launchpad.net/bugs/1077805 Since the system was unusable this way, I had to remove it and install another OS based on 12.04. Has anyone else faced this issue or does someone know what to do to fix it? I'd go back to vanilla Ubuntu in a heartbeat if this issue can be fixed.

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

< Previous Page | 27 28 29 30 31 32 33 34 35 36 37 38  | Next Page >