Search Results

Search found 8893 results on 356 pages for 'stored'.

Page 310/356 | < Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >

• PHP include taking too long

  - by wxiiir

  I have a php file with around 100mb which is full of arrays (only arrays). I've made a script that includes this file (for processing), first it exhausted the default Xampp 128mb memory limit, i've raised it to 1024mb but it just takes forever and doesn't do anything. I'm sure the problem is being created by the sheer size of the file because i've tried removing all lines of code and just leaving the include and an echo for me to know when it finishes executing, and it does the same thing (which is taking forever), i've also tried to run the 100mb file in separate and same thing again. A 10mb file is taking forever as well but a similar 1mb file is almost instantly read and executed so the problem must be more than just the file size. I was avoiding using c++ for a simple project as this and would rather not to as php is easier for me and the task that will be executed doesn't need to benefit from the added speed that it would have if it had been done in c++ but if i have no luck in solving this problem i guess i'll have to. EDIT Reasons for not using a database: 1-Whoever made it didn't used a database and it will be pretty hard to store this in an organized database if i'm not able to do something with it first, like just reading it, copying parts from it or putting in memory or something. 2-I don't have experience working with databases as pretty much all stuff i've ever done in php didn't needed large amounts of stored data, 50kb at best, if i was thinking about a big project or huge chunks of data as this one, i definitely would, but i didn't made this mess to start with and now i have to undo it. 3-The logic for having to store a small portion of data like 10mb in hard drive when now every computer has pretty much enough ram to fit the whole OS in it is pretty much incomprehensible unless someone gives a good explanation about it, if i had to access a lot of said files simultaneously i would understand but like i said, this is a simple project, this is the only file that will be accessed at a given time this isn't even to make some kind of website, it's to run a few times and be done with it.

  Read the article

• Call instance method with objc_msgSend

  - by user772349

  I'm trying to use the objc_msgSend method to call some method dynamically. Say I want call some method in Class B from Class A and there are two methods in class B like: - (void) instanceTestWithStr1:(NSString *)str1 str2:(NSString *)str1; + (void) methodTestWithStr1:(NSString *)str1 str2:(NSString *)str1; And I can call the class method like this in Class A successfully: objc_msgSend(objc_getClass("ClassB"), sel_registerName("methodTestWithStr1:str2:"), @"111", @"222"); And I can call the instance method like this in Class A successfully as well: objc_msgSend([[objc_getClass("ClassB") alloc] init], sel_registerName("instanceTestWithStr1:str2:"), @"111", @"222"); But the thing is to get a instance of Class B I have to call "initWithXXXXX:XXXXXX:XXXXXX" instead of "init" so that to pass some necessary parameters to class B to do the init stuff. So I stored a instance of ClassB in class A as variable: self.classBInstance = [[ClassB alloc] initWithXXXXX:XXXXXX:XXXXXX]; And then I call the method like this (successfully): The problem is, I want to call a method by simply applying the classname and the method sel like "ClassName" and "SEL" and then call it dynamically: If it's a class method. then call it like: objc_msgSend(objc_getClass("ClassName"), sel_registerName("SEL")); If it's a instance method, find the existing class instance variable in the calling class then: objc_msgSend([self.classInstance, sel_registerName("SEL")); So I want to know if there is any way to: Check if a class has a given method (I found "responseToSelector" will be the one) Check if a given method in class method or instance method (maybe can use responseToSelector as well) Check if a class has a instance variable of a given class So I can call a instance method like: objc_msgSend(objc_getClassInstance(self, "ClassB"), sel_registerName("SEL"));

  Read the article

• Trouble using files Globally

  - by Nightforce2

  Recently I ran into trouble when I discovered that vista restricts what can be installed into the system32 directory even though I am the administrator for this computer. It will not allow me to register dll files so I can use programs like wget globally like how programs "nslookup" etc are used. Keeps giving me this error. Regsvr32: The module "C:\Windows\System32\libeay32.dll" failed to load. make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found. Moving the required DLL files to system32 prompts me to confirm administrator privileges are needed to move these files, So I give the permission, copy the files to system32, and run wget to confirm. This is where it tells me it cannot find the DLL's required to run and when using regsvr32 it says it cannot find the entry point so it will not load the DLL asking me if it is a valid DLL or OCX file. If I leave the DLL's that came with wget in the same folder as wget outsite of system32 they work vice adding them to system32 with the exe it will not work saying it cannot read the those dll files. Is there a way around this or Do I need to Upgrade to Windows 7 to get away from these problems/restrictions?

  Read the article

• Response Redirect - Open Link in New Window

  - by bacis09

  First, I've taken the time to review this question which seems to be the most similar, however, the solution that seems to have been selected will not work in my scenario.Not to mention I worry about some of the comments claiming it to be brittle or an inadequate solution. http://stackoverflow.com/questions/104601/asp-net-response-redirect-to-new-window -We have an XML document which basically contains all of the information for a Side menu. -We have numerous URLS which are stored in a constants class. -One of the elements in a string of XML (well call it label) is used to determine if the menu item is created as a LinkButton or a Label. -Links use a custom user control that is used standard for all links across the application (why suggestion on similar thread doesn't work - I don't want all links to open in a new window - just one) -One of the elements in a string of XML (well call it function) is used in a Switch statement to generate our links using Response Redirect. It may look something like this. switch (function) { case goto 1: string url; if (user_group == 1) { url = Constants.CONSTANT1 } else { url = Constants.CONSTANT2 } Response.Redirect(url) case goto 2: ...... default: ...... break; } Given this scenario, I'm trying to find the best way to quickly open a New Window, when a specific case in this switch statement is met. Can it be done with Response Redirect (this seems to be arguable - people say no it can't, yet other people say they have made it work)? If not, what alternative can work here?

  Read the article

• Processing data from an AJAX request

  - by Josh K

  I have a PHP API I'm working with that outputs everything as JSON. I need to call one of the API methods and parse it out using an AJAX request. I am using jQuery (though it shouldn't matter). When I make the request it errors out with a "parsererror" as the textStatus and a "Syntax Error: invalid label" when I make the request. Simplified code: $.ajax ({ type: "POST", url: "http://mydomain.com/api/get/userlist/"+mid, dataType: "json", dataFilter: function(data, type) { /* Here we assume and pray */ users = eval(data); alert(users[1].id); }, success: function(data, textStatus, XMLHttpRequest) { alert(data.length); // Should be an array, yet is undefined. }, error: function(XMLHttpRequest, textStatus, errorThrown) { alert(textStatus); alert(errorThrown); }, complete: function(XMLHttpRequest, textStatus) { alert("Done"); } }); If I leave off the eval(data) then everything works fine. Well, except for data still being undefined in success. Note that I'm taking an array of objects in PHP and then passing them out through json_encode. Would that make any difference? There has been no progress made on this. I'm willing to throw more code up if someone believes they can help. Here is the PHP side of things private function _get_user_colors($id) { $u = new User(); $u->get_where(array('id' => $id)); $bar = array(); $bar['user'] = $u->stored; foreach($user->colors as $color) { $bar['colors'][] = $color; } echo(json_encode($bar)); } I have had zero issues using this with other PHP based scripts. I don't know why Javascript would take issue with it.

  Read the article

• Can I get away with this or is it just too crude and unpractical ?

  - by The_AlienCoder

  I spent the whole of last night searching for a free AspNet web chat control that I could simply drag into my website. Well the search was in vain as I could not find a control that matched my needs i.e List of users, 1 to 1 chat, Ability to kick out users.. In the end I decided to create my own control from scractch. Although it works well on my machine Im concerned that It maybe a little crude and unpractical on a shared hosting enviroment. Basically this is what I did : Created an sql database that stores the chat messages. Wrote the stored procedures and and included a statement that clears old messages Then the 'crude' part : Dragged an update panel and timer control on my page Dragged a Repeater databound to the chat messages table inside the update panel Dragged another update panel and inside it put a textbox and a button Configured the timer control to tick every 5 seconds. ..and then I made it all work like this In the timer tick event I 'refreshed' the messages display by invoking Databind() on my repeater i.e protected void Timer1_Tick(object sender, EventArgs e) { MyRepeater.DataBind(); } Then in my send button click event protected void btnSend_Click(object sender, EventArgs e) { MyDataLayer.InsertMessage(Message, Sender, CurrTime); } Well It works well on my machine and Ive got the other functionalities(users list, kick out user..) to work by simply creating more tables. But like I said it seems a little crude to me. so I need a proffesional opinion. Should I run with this or try another Approach ?

  Read the article

• IEnumerator seems to be effecting all objects, and not one at a time

  - by PFranchise

  Hey, I am trying to alter an attribute of an object. I am setting it to the value of that same attribute stored on another table. There is a one to many relationship between the two. The product end is the one and the versions is the many. Right now, both these methods that I have tried have set all the products returned equal to the final version object. So, in this case they are all the same. I am not sure where the issue lies. Here are my two code snipets, both yield the same result. int x = 1 IEnumerator<Product> ie = productQuery.GetEnumerator(); while (ie.MoveNext()) { ie.Current.RSTATE = ie.Current.Versions.First(o => o.VersionNumber == x).RSTATE; x++; } and foreach (var product in productQuery) { product.RSTATE = product.Versions.Single(o => o.VersionNumber == x).RSTATE; x++; } The versions table holds information for previous products, each is distinguished by the version number. I know that it will start at 1 and go until it reaches the current version, based on my query returning the proper number of products. Thanks for any advice.

  Read the article

• Is there an user-level accessible font table present in Linux?

  - by youngdood

  Hi again Stackoverflow! Since there is this: http://en.wikipedia.org/wiki/Code_page_437 For MSDOS, is there something similar for Linux systems? Is it possible to access that font data via userland program? I would actually just need an access to the actual bit patterns which define the font, and I would do the rendering myself. I'm fairly sure that something like this exists, but I haven't been able to find what exactly is it and how to access it. After all, e.g. text mode console font has to reside somewhere, and I really do hope it is "rawly" accessible somehow for a userland program. Before I forget, I'm programming my program in C, and have access only to the "standard" linux/posix development headers. The only thing I could came up with myself is to use the fonts in /usr/share/fonts, but having to write my own implementations to extract the data from there doesn't sound really an option; I would really want to achieve this with the least amount of bytes possible, so I feel I'm left with finding a standard way of doing this. It's not really feasible for me to store my own 8x8 ASCII-compatible font with the program either(it takes some 1024 bytes(128 chars * 8x8 bits) just to store the font, which is definitely unacceptable for the strict size limits(some < 1024 bytes for code+data) which I am working with), so being able to use the font data stored at the system itself would greatly simplify my task.

  Read the article

• creating a vector with references to some of the elements of another vector

  - by memC

  hi, I have stored instances of class A in a std:vector, vec_A as vec_A.push_back(A(i)). The code is shown below. Now, I want to store references some of the instances of class A (in vec_A) in another vector or another array. For example, if the A.getNumber() returns 4, 7, 2 , I want to put a reference to that instance of A in another vector, say std:vector<A*> filtered_A or an array. Can someone sow me how to do this?? Thanks! class A { public: int getNumber(); A(int val); ~A(){}; private: int num; }; A::A(int val){ num = val; }; int A::getNumber(){ return num; }; int main(){ int i =0; int num; std::vector<A> vec_A; for ( i = 0; i < 10; i++){ vec_A.push_back(A(i)); } std::cout << "\nPress RETURN to continue..."; std::cin.get(); return 0; }

  Read the article

• How important is it that models be consistent across project components?

  - by RonLugge

  I have a project with two components, a server-side component and a client-side component. For various reasons, the client-side device doesn't carry a fully copy of the database around. How important is it that my models have a 1:1 correlation between the two sides? And, to extend the question to my bigger concern, are there any time-bombs I'm going to run into down the line if they don't? I'm not talking about having different information on each side, but rather the way the information is encapsulated will vary. (Obviously, storage mechanisms will also vary) The server side will store each user, each review, each 'item' with seperate tables, and create links between them to gather data as necessary. The client side shouldn't have a complete user database, however, so rather than link against the user for gathering things like 'name', I'd store that on the review. In other words... --- Server Side --- Item: +id //Store stuff about the item User: +id +Name -Password Review: +id +itemId +rating +text +userId --- Device Side --- Item: +id +AverageRating Review: +id +rating +text +userId +name User: +id +Name //Stuff The basic idea is that certain 'critical' information gets moved one level 'up'. A user gets the list of 'items' relevant to their query, with certain review-orientation moved up (i. e. average rating). If they want more info, they query the detail view for the item, and the actual reviews get queried and added to the dataset (and displayed). If they query the actual review, the review gets queried and they pick up some additional user info along the way (maybe; I'm not sure if the user would have any use for any of the additional user information). My basic concern is that I don't wan't to glut the user's bandwidth or local storage with a huge variety of information that they just don't need, even if proper database normalizations suggests that information REALLY should be stored at a 'lower' level. I've phrased this as a fairly low-level conceptual issue because that's the level I'm trying to think / worry over, but if it matters I'm creating a PHP / MySQL server that provides data for a iOS / CoreData client.

  Read the article

• servlet ArrayList and HashMap problem witch result

  - by nonameplum

  Hi, I have that code List<Map<String, Object>> data = new ArrayList<Map<String, Object>>(); Map<String, Object> item = new HashMap<String, Object>(); data.clear(); item.clear(); int i = 0; while (i < 5){    item.put("id", i);    i++;    out.println("id: " + item.get("id"));    out.println("--------------------------");    data.add(item); } for(i=0 ; i<5 ; i++){    out.println("print data[" + i + "]" + data.get(i)); } Result of that is: id: 0 -------------------------- id: 1 -------------------------- id: 2 -------------------------- id: 3 -------------------------- id: 4 -------------------------- print data[0]{id=4} print data[1]{id=4} print data[2]{id=4} print data[3]{id=4} print data[4]{id=4} Why only last element is stored?

  Read the article

• table column accepting "0" as a member Id

  - by user682417

  I have two tables one is members table with columns member id , member first name, member last name. I have another table guest passes with columns guest pass id and member id and issue date . I have a list view that will displays guest passes details (I.e) like member name and issue date and I have two text boxes those are for entering member name and issue date . member name text box is auto complete text box that working fine.... but the problem is when I am entering the name that is not in member table at this time it will accept and displays a blank field in list view in member name column and member id is stored as "0" in guest pass table ...... I don't want to display the member name empty blank and I don t want to store "0" in guest pass table and this is the insert statement sql2 = @"INSERT INTO guestpasses(member_Id,guestPass_IssueDate)"; sql2 += " VALUES("; sql2 += "'" + tbCGuestPassesMemberId.Text + "'"; sql2 += ",'" + tbIssueDate.Text + "'"; guestpassmemberId = memberid is there any validation that need to be done can any one suggestions on this pls... and this is the auto complete text box statement sql = @"SELECT member_Id FROM members WHERE concat(member_Firstname,'',member_Lastname) ='" + tbMemberName.Text+"'"; if (dt != null) { if (dt.Rows.Count > 0) { tbCGuestPassesMemberId.Text = Convert.ToInt32(dt.Rows[0] ["member_Id"]).ToString(); } } can any one help me on this ... is there any type of validation with sql query pls help me .....

  Read the article

• jQuery trigger function on change

  - by Michael Pasqualone

  I have the following two slider functions which work well and display like so: I have diskAmount and transferAmount stored in global vars, however what I am now trying to figure out is how do I get the sum of the two to initially show as the monthly fee, and then update when either of the two sliders are changed. So in my screenshot above the initial state will be $24.75, and the fee will update if the sliders change. Can anyone point me in the right direction? I get can the initial fee to show, but can't figure out how to get 1 function to call another function within jQuery. $(function() { $("#disk").slider({ value:3, min: 1, max: 80, step: 1, slide: function(event, ui) { $("#diskamount").val(ui.value + ' Gb'); $("#diskamountUnit").val('$' + parseFloat(ui.value * diskCost).toFixed(2)); } }); // Set initial diskamount state $("#diskamount").val($("#disk").slider("value") + ' Gb'); // Set initial diskamountUnit state diskAmount = $("#disk").slider("value") * diskCost; $("#diskamountUnit").val('$' + diskAmount.toFixed(2)); }); $(function() { $("#data").slider({ value:25, min: 1, max: 200, step: 1, slide: function(event, ui) { $("#dataamount").val(ui.value + ' Gb'); $("#dataamountUnit").val('$' + parseFloat(ui.value * transferCost).toFixed(2)); } }); // Set initial dataamount state $("#dataamount").val($("#data").slider("value") + ' Gb'); // Set initial dataamountUnit state transferAmount = $("#data").slider("value") * transferCost; $("#dataamountUnit").val('$' + transferAmount.toFixed(2)); });

  Read the article

• How to emulate a BEFORE DELETE trigger in SQL Server 2005

  - by Mark

  Let's say I have three tables, [ONE], [ONE_TWO], and [TWO]. [ONE_TWO] is a many-to-many join table with only [ONE_ID and [TWO_ID] columns. There are foreign keys set up to link [ONE] to [ONE_TWO] and [TWO] to [ONE_TWO]. The FKs use the ON DELETE CASCADE option so that if either a [ONE] or [TWO] record is deleted, the associated [ONE_TWO] records will be automatically deleted as well. I want to have a trigger on the [TWO] table such that when a [TWO] record is deleted, it executes a stored procedure that takes a [ONE_ID] as a parameter, passing the [ONE_ID] values that were linked to the [TWO_ID] before the delete occurred: DECLARE @Statement NVARCHAR(max) SET @Statement = '' SELECT @Statement = @Statement + N'EXEC [MyProc] ''' + CAST([one_two].[one_id] AS VARCHAR(36)) + '''; ' FROM deleted JOIN [one_two] ON deleted.[two_id] = [one_two].[two_id] EXEC (@Statement) Clearly, I need a BEFORE DELETE trigger, but there is no such thing in SQL Server 2005. I can't use an INSTEAD OF trigger because of the cascading FK. I get the impression that if I use a FOR DELETE trigger, when I join [deleted] to [ONE_TWO] to find the list of [ONE_ID] values, the FK cascade will have already deleted the associated [ONE_TWO] records so I will never find any [ONE_ID] values. Is this true? If so, how can I achieve my objective? I'm thinking that I'd need to change the FK joining [TWO] to [ONE_TWO] to not use cascades and to do the delete from [ONE_TWO] manually in the trigger just before I manually delete the [TWO] records. But I'd rather not go through all that if there is a simpler way.

  Read the article

• Create an index only on certain rows in mysql

  - by dhruvbird

  So, I have this funny requirement of creating an index on a table only on a certain set of rows. This is what my table looks like: USER: userid, friendid, created, blah0, blah1, ..., blahN Now, I'd like to create an index on: (userid, friendid, created) but only on those rows where userid = friendid. The reason being that this index is only going to be used to satisfy queries where the WHERE clause contains "userid = friendid". There will be many rows where this is NOT the case, and I really don't want to waste all that extra space on the index. Another option would be to create a table (query table) which is populated on insert/update of this table and create a trigger to do so, but again I am guessing an index on that table would mean that the data would be stored twice. How does mysql store Primary Keys? I mean is the table ordered on the Primary Key or is it ordered by insert order and the PK is like a normal unique index? I checked up on clustered indexes (http://dev.mysql.com/doc/refman/5.0/en/innodb-index-types.html), but it seems only InnoDB supports them. I am using MyISAM (I mention this because then I could have created a clustered index on these 3 fields in the query table). I am basically looking for something like this: ALTER TABLE USERS ADD INDEX (userid, friendid, created) WHERE userid=friendid

  Read the article

• Are reads and (transactional) writes faster for entities of the same group than otherwise?

  - by indiehacker

  What advantage is there to designing child-parent relationships, which allow us to do writes in transactions, when there is never a real concern for consistency and contention and those sort of more complex issues? Does it make writes and reads faster? Consider my situation where there are many .png images that are referenced to one mosaic layer, and these .png images are written just once by a single user. The user can design many mosaic layers and her mosaic layers and referenced image entities are never changed/updated, they are just deleted some time in the future. Other users can come to the web project site and interactively view the mosaic layer as different layouts/configurations of the images as they play (query) with different criteria. So reads should be very fast. So there is no real worry of contention, or users conflicting with one another with writing new image entities. And because of that I am assuming there is no "requirement" for the .png image entities to be grouped by their same mosaic layer in child-parent relationship. However, perhaps, since the documentation says they are stored close to one another, if the many image entities were grouped as children to a single mosaic layer parent than this has the advantage that the writing (in transaction) and reading will happen much faster?

  Read the article

• Change cookies when doing jQuery.ajax requests in Chrome Extensions

  - by haskellguy

  I have wrote a plugin for facebook that sends data to testing-fb.local. The request goes through if the user is logged in. Here is the workflow: User logs in from testing-fb.local Cookies are stored When $.ajax() are fired from the Chrome extension Chrome extension listen with chrome.webRequest.onBeforeSendHeaders Chrome extension checks for cookies from chrome.cookies.get Chrome changes the Set-Cookies header to be sent And the request goes through. I wrote this part of code that shoud be this: function getCookies (callback) { chrome.cookies.get({url:"https://testing-fb.local", name: "connect.sid"}, function(a){ return callback(a) }) } chrome.webRequest.onBeforeSendHeaders.addListener( function(details) { getCookies(function(a){ // Here something happens }) }, {urls: ["https://testing-fb.local/*"]}, ['blocking']); Here is my manifest.json: { "name": "test-fb", "version": "1.0", "manifest_version": 1, "description": "testing", "permissions": [ "cookies", "webRequest", "tabs", "http://*/*", "https://*/*" ], "background": { "scripts": ["background.js"] }, "content_scripts": [ { "matches": ["http://*.facebook.com/*", "https://*.facebook.com/*"], "exclude_matches" : [ "*://*.facebook.com/ajax/*", "*://*.channel.facebook.tld/*", "*://*.facebook.tld/pagelet/generic.php/pagelet/home/morestories.php*", "*://*.facebook.tld/ai.php*" ], "js": ["jquery-1.8.3.min.js", "allthefunctions.js"] } ] } In allthefunction.js I have the $.ajax calls, and in background.js is where I put the code above which however looks not to run.. In summary, I have not clear: What I should write in Here something happens If this strategy is going to work Where should I put this code?

  Read the article

• DynamicContent.html: Write a JavaScript in an HTML document that can change the content of an HTML e

  - by A sw A

  ShowHide.html: Write a JavaScript in an HTML document that displays an image and allows the user to toggle the image between appearing and not appearing in the document. Place your image in a (division) tag that has a style attribute. “style.visibility” can take two values: “visible” and “hidden”. The document has a button called “Toggle Image”, which calls the toggle function upon the event “onclick”. DynamicColors.html: Write a JavaScript in an HTML document that changes the background and foreground colors of the body of a document according to the user input. The document has two input texts: background color and foreground color. The colors change when the event “onchange” occurs as you type in the text input and the event handler is called. Your event handler takes two parameters: “where”, and “newColor”. To change the document color and background color you need to change the elements document.body.style.color and document.body.style.backgroundColor. Available colors are: black, silver, gray, white, maroon, red, purple, fuchsia, green, lime, olive, yellow, navy, blue, teal, and aqua. DynamicContent.html: Write a JavaScript in an HTML document that can change the content of an HTML element (a help box). The content of an element is accessed through its “value” property. The content of a help box can change depending on the placement of the mouse cursor. When the cursor is placed over a particular input field (“onmouseover” event), the help box can display advice on how the field is to be filled. When the cursor is moved away from the input field (“onmouseout” event), the help box content changes to simply indicate that assistance is available. Your messages are stored in an array of strings.

  Read the article

• Simple Oracle File repository with folder hierarchy

  - by Ope

  I have an application that stores large amount of files (XML and binary) in folder hierarchies. Currently the main method is storing them in file system or using a legacy CMS, which we want to get rid of. The CMS supports Oracle and a customer wants to keep the files in Oracle because of enterprise policies (backup etc.) The question is: Is there a simple implementation of file repository with folder hierarchy for Oracle? What I am looking for is a small .Net component or example code (PL/SQL and/or .Net) that would have the following methods: Create, Delete, Exists Folder CRUD file Move and potentially Copy file or directory Access to files and folders with paths like "/root/folder1/folder2/file.xml" Ability to get all the files and folders in a folder and potentially also the entire directory tree Tree traversal, getting the parent, all children etc. needs to be fast. I need the implementation in .Net, but if it was just the stored procedures, I could create the .Net calling code. I have pointers to generic articles for creating hierarchies in DB, so if I need to do it from scratch, I know where to start. What I am asking here, is there already an implementation that I could take without doing this from scratch? It seems like such a generic requirement... If the answer is a CMS, Document management system or such it should be Open Source or at least quite cheap (some hundreds / server) and it should be possible to deploy it XCopy - hopefully only couple of DLL:s. I do not need - or want - a full featured big CMS with dozens of dlls and especially not an msi-installation. I have tried to google this, but the words "repository", "CMS", "file hierarchy" etc. give so many answers, the searches are pretty much useless. Thanks, OPe

  Read the article

• Adding linked table to Access 2003 while keeping ODBC connection info in MDB

  - by webworm

  I have an Access 2003 database MDB where all of the tables exist as linked tables within SQL Server 2005. The MDB file contains all of the ODBC information that points to the correct SQL Server and log-on credentials (trusted connection). What I would like to do is add a new linked table to the MDB file however I am not sure how to go about specifying the ODBC connection information. When I try to add a new linked table I keep getting prompted to locate or create a DSN file. I don't want to have to create a new DSN entry on every machine, rather I would like all that information stored within the Access MDB file itself. In the existing database I can "hover" over the table names and see the ODBC connection info as a tool-tip. All I need to do is add another linked table using the same connection information. I do have access to the SQL Server where the tables are linked to,. I have already created the new table I wanted to add. I just need to find a way to link to it.

  Read the article

• PHP Saving information to MySQL but not using hard coded code

  - by Homer_J

  Hi guys, Thanks everyone for assisting me but know I'm well and truely stuck...hopefully someone can advise? My current code that saves to a MySQL database: $q1 = $_POST["q1"]; $q2 = $_POST["q2"]; $q3 = $_POST["q3"]; $q4 = $_POST["q4"]; $q5 = $_POST["q5"]; $q6 = $_POST["q6"]; $q7 = $_POST["q7"]; $q8 = $_POST["q8"]; $proc = mysqli_prepare($link, "INSERT INTO tresults_bh_main (respondent_id, ip, browser, q1, q2, q3, q4, q5, q6, q7, q8) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?);"); mysqli_stmt_bind_param($proc, "issiiiiiiii", $respondent_id, $ip, $browser, $q1, $q2, $q3, $q4, $q5, $q6, $q7, $q8); At the moment this is all hard coded and I need it to use variables: I have an array which stores the following information: $qs['questions'] - stores, for example q1, q2, q3, q4 etc - obviously these change both in terms of of numbers, ie. q10, q11, q12 and also the amount in the array - so there could be 4 q's or 10 q's stored in the array. What I struggling to get my head around is how I would set-up this hard coded page to work with my variables. If anyone can help, much appreciated. Homer.

  Read the article

• Identifying memory leaks in C++

  - by Dororo

  I've got the following bit of code, which I've narrowed down to be causing a memory leak (that is, in Task Manager, the Private Working Set of memory increases with the same repeated input string). I understand the concepts of heaps and stacks for memory, as well as the general rules for avoiding memory leaks, but something somewhere is still going wrong: while(!quit){ char* thebuffer = new char[210]; //checked the function, it isn't creating the leak int size = FuncToObtainInputTextFromApp(thebuffer); //stored in thebuffer string bufferstring = thebuffer; int startlog = bufferstring.find("$"); int endlog = bufferstring.find("&"); string str_text=""; str_text = bufferstring.substr(startlog,endlog-startlog+1); String^ str_text_m = gcnew String(str_text_m.c_str()); //some work done delete str_text_m; delete [] thebuffer; } The only thing I can think of is it might be the creation of 'string str_text' since it never goes out of scope since it just reloops in the while? If so, how would I resolve that? Defining it outside the while loop wouldn't solve it since it'd also remain in scope then too. Any help would be greatly appreciated.

  Read the article

• PHP & MySQL storing multiple values in a database.

  - by R.I.P.coalMINERS

  I'm basically a front end designer and new to PHP and MySQL but I want a user to be able to store multiple names and there meanings in a MySQL database table named names using PHP I will dynamically create form fields with JQuery every time a user clicks on a link so a user can enter 1 to 1,000,000 different names and there meanings which will be stored in a table called names. All I want to know is how can I store multiple names and there meanings in a database and then display them back to the user for them to edit or delete using PHP MySQL? I created the MySQL table already. CREATE TABLE names ( id INT UNSIGNED NOT NULL AUTO_INCREMENT, userID INT NOT NULL, name VARCHAR(255) NOT NULL, meaning VARCHAR(255) NOT NULL, PRIMARY KEY (id) ); Here is the HTML. <form method="post" action="index.php"> <ul> <li><label for="name">Name: </label><input type="text" name="name" id="name" /></li> <li><label for="meaning">Meaning: </label><input type="text" name="meaning" id="meaning" /></li> <li><input type="submit" name="submit" value="Save" /> <input type="hidden" name="submit" value="true" /></li> </ul> </form>

  Read the article

• Using MPI_Type_Vector and MPI_Gather, in C.

  - by Goloneg

  Hi, I am trying to multiply square matrices in parallele with MPI. I use a MPI_Type_vector to send square submatrixes (arrays of float) to the processes, so they can calculate subproducts. Then, for the next iterations, these submatrices are send to neighbours processes as MPI_Type_contiguous (the whole submatrix is sent). This part is working as expected, and local results are corrects. Then, I use MPI_Gather with the contiguous types to send all local results back to the root process. The problem is, the final matrix is build (obviously, by this method) line by line instead of submatrix by submatrix. I wrote an ugly procedure rearranging the final matrix, but I would like to know if there is a direct way of performing the "inverse" operation of sending MPI_Type_vectors (i.e., sending an array of values and directly arranging it in a subarray form in the receiving array). An example, to try and clarify my long text : A[16] and B[16] are 4x4 matrices to be multiplied ; C[16] will contain the result ; 4 processes are used (Pi with i from 0 to 3) : Pi gets two 2x2 submatrices : subAi[4] and subBi[4] ; their product is stored locally in subCi[4]. For instance, P0 gets : subA0[4] containing A[0], A[1], A[4] and A[5] ; subB0[4] containing B[0], B[1], B[4] and B[5]. After everything is calculed, root process gathers all subCi[4]. Then C[16] contains : [ subC0[0], subC0[1], subC0[2], subC0[3], subC1[0], subC1[1], subC1[2], subC1[3], subC2[0], subC2[1], subC2[2], subC2[3], subC3[0], subC3[1], subC3[2], subC3[3]] and I would like it to be : [ subC0[0], subC0[1], subC1[0], subC1[1], subC0[2], subC0[3], subC1[2], subC1[3], subC2[0], subC2[1], subC3[0], subC3[1], subC2[2], subC2[3], subC3[2], subC3[3]] without further operation. Does someone know a way ? Thanks for your advices.

  Read the article

• Should I be backing up a webapp's data to another host continuously ?

  - by user196289

  I have webapp in development. I need to plan for what happens if the host goes down. I will lose some very recent session status (which I can live with) and everything else should be persistently stored in the database. If I am starting up again after an outage, can I expect a good host to reconstruct the database to within minutes of where I was up to ? Or seconds ? Or should I build in a background process to continually mirror the database elsewhere ? What is normal / sensible ? Obviously a good host will have RAID and other redundancy so the likelihood of total loss should be low, and if they have periodic backups I should lose only very recent stuff but this is presumably likely to be designed with almost static web content in mind, and my site is transactional with new data being filed continuously (with a customer expectation that I don't ever lose it). Any suggestions / advice ? Are there off the shelf frameworks for doing this ? (I'm primarily working in Java) And should I just plan to save the data or should I plan to have an alternative usable host implementation ready to launch in case the host doesn't come back up in a suitable timeframe ?

  Read the article

< Previous Page | 306 307 308 309 310 311 312 313 314 315 316 317  | Next Page >