Search Results

Search found 8893 results on 356 pages for 'stored'.

Page 316/356 | < Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >

• Desktop Applications Versus Web Applications

  Up until the advent of the internet programmers really only developed one type of application used by end-users.  This type of application was called a desktop application. As the name implies, these applications ran strictly from a desktop computer, and were limited by the resources available to the computer. Initially, this type of applications did not need resources outside of the scope of the computer in which they installed. The problem with this type of application is that if multiple end-users need to access the same desktop application, then the application must be installed on the end-user’s computer. In this age of software development security was not as big of a concern as it is today with other types of applications. This is primarily due to the fact that an end-user must have access to the computer where the software is installed in order for them to access the application. In addition, developers could also password protect the application just in case an authorized end-user was able to gain access to the computer. With the birth of the internet a second form of application emerged because developers were trying to solve inherent issues with the preexisting desktop application. One of the solutions to overcome some of the short comings of desktop applications is the web application. Web applications are hosted on a centralized server and clients only need to have network access and a web browser in order to access the application. Because a web application can be installed on a remote server it removes the need for individual installations of the same application on each end-user’s computer.  The main benefits to an application being hosted on a server is increased accessibility to the application due to the fact that nothing has to be installed on a desktop computer for an end-user to be able to access the application. In addition, web applications are much easier to maintain because any change to the application is applied on the server and is inherently applied to any end-user trying to use the application. This removes the time needed to install and maintain individual installations of a desktop application. However with the increased accessibility there are additional costs that are incurred compared to a desktop application because of the additional cost and maintenance of a server hosting the application. Typically, after a desktop application is purchased there are no additional reoccurring fees associated with the application.  When developing a web based application there are additional considerations that must be addressed compared to a desktop application. The added benefit of increased accessibility also now adds a new failure point when trying to gain access to an application. An end-user now must have network connectivity in order to access the application. This issue is not a concern for desktop applications because there resources are typically bound to the computer in which they run. Since the availability of an application is increased with the use of the client-server model in a web based application, additional security concerns now come in to play. As stated before a, desktop application is bound to the accessibility of the end-user to the computer that the application is installed. This is not the case with web based applications because they potentially could have access from anywhere with the proper internet/network connection. Additional security steps are required to insure the integrity of the application and its data. Examples of these steps include and are not limited to the following: Restricted/Password Areas This form of security is used when specific information can only be accessed by end-users based on a set of accessibility rules. IP Restrictions This form of security is used when only specific locations need to access an application. This form of security is applied from within the web server or a firewall. Network Restrictions (Firewalls) This form of security is used to contain access to an application within a specific sub set of a network. Data Encryption This form of security is used transform personally identifiable information in to something unreadable so that it can be stored for future use. Encrypted Protocols (HTTPS) This form of security is used to prevent others from reading messages being sent between applications over a network.

  Read the article

• how to assign javascript variable value to the google analytics script? [migrated]

  - by Vinoth Prakash

  I have assigned two values in the two hidden variables at server Side and accessed those values at client side using script. I have written the google analytics code. I have set two custom variable. I need to pass two values which is stored in the javascript variables to the "value" of custom variable. I have assigned the varibales but values not displaying. please telll what error i made in the script. My aspx code <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <br /> Total Pirce&nbsp; &nbsp;: <asp:Label ID="Label1" runat="server" Text="10"></asp:Label><br /> &nbsp;Ship Price&nbsp; &nbsp; : <asp:Label ID="Label2" runat="server" Text="5"></asp:Label> <br /> ------------------<br /> Grand Total : <asp:Label ID="Label3" runat="server" Text="15"></asp:Label><br /> ------------------</div> <asp:HiddenField ID="HiddenField1" runat="server" /> <asp:HiddenField ID="HiddenField2" runat="server" /> </form> <script type="text/javascript"> var serverhid1 = document.getElementById('HiddenField1').value; var serverhid2 = document.getElementById('HiddenField2').value; alert(serverhid1) alert(serverhid2) var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-35156990-1']); //Set Custom Variable _gaq.push(['_setCustomVar', 1, 'TotalPirce', serverhid1 , 3]); _gaq.push(['_setCustomVar', 2, 'Shipping','yes', 3]); _gaq.push(['_setCustomVar', 3, 'GrandTotal',check(), 3]); _gaq.push(['_setDomainName', 'none']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> </body> </html> cs Code protected void Page_Load(object sender, EventArgs e) { HiddenField1.Value = Label1.Text; HiddenField2.Value = Label2.Text; }

  Read the article

• Comparing Isis, Google, and Paypal

  - by David Dorf

  Back in 2010 I was sure NFC would make great strides, but here we are two years later and NFC doesn't seem to be sticking. The obvious reason being the chicken-and-egg problem.  Retailers don't want to install the terminals until the phones support NFC, and vice-versa. So consumers continue to sit on the sidelines waiting for either side to blink and make the necessary investment.  In the meantime, EMV is looking for a way to sneak into the US with the help of the card brands. There are currently three major solutions that are battling in the marketplace.  All three know that replacing mag-stripe alone is not sufficient to move consumers.  Long-term it's the offers and loyalty programs combined with tendering that make NFC attractive. NFC solutions cross lots of barriers, so a strong partner system is required.  The solutions need to include the carriers, card brands, banks, handset manufacturers, POS terminals, and most of all lots of merchants.  Lots of coordination is necessary to make the solution seamless to the consumer. Google Wallet Google's problem has always been that only the Nexus phone has an NFC chip that supports their wallet.  There are a couple of additional phones out there now, but adoption is still slow.  They acquired Zavers a while back to incorporate digital coupons, but the the bulk of their users continue to be non-NFC.  They have taken an open approach by not specifying particular payment brands.  Google is piloting in San Francisco and New York, supporting both MasterCard PayPass and stored value. I suppose the other card brands may eventually follow.  There's no cost for consumers or merchants -- Google will make money via targeted ads. Isis Not long after Google announced its wallet, AT&T, Verizon, and T-Mobile announced a joint venture called Isis.  They are in the unique position of owning the SIM in the phones they issue.  At first it seemed Isis was a vehicle for the carriers to compete with the existing card brands, but Isis later switched to a generic wallet that supports the major card brands.  Isis reportedly charges issuers a $5 fee per customer per year.  Isis will pilot this summer in Salt Lake City and Austin. PayPal PayPal, the clear winner in the online payment space beyond traditional credit cards, is trying to move into physical stores.  After negotiations with Google to provide a wallet broke off, PayPal decided to avoid NFC altogether, at least for now, and focus on payments without any physical card or phone.  By avoiding NFC, consumers don't need an NFC-enabled phone and merchants don't need a new reader.  Consumers must enter their phone number and PIN in the merchant's existing device, or they can enter their PIN in the PayPal inStore app running on their phone, then show the merchant a unique barcode which authorizes payment. Paypal is free for consumers and charges a fee for merchants.  Its not clear, at least to me, how PayPal handles fraudulent transactions and whether the consumer is protected. The wildcard is, of course, Apple.  Their mobile technologies set the standard, so incorporating NFC chips would certainly accelerate adoption of many payment solutions.  Their announcement today of the iOS Passbook is a step in the right direction, but stops short of handling payments. For those retailers that have invested in modern terminals, it seems the best strategy is to support all the emerging solutions and let the consumers choose the winner.

  Read the article

• T-SQL (SCD) Slowly Changing Dimension Type 2 using a merge statement

  - by AtulThakor

  Working on stored procedure recently which loads records into a data warehouse I found that the existing record was being expired using an update statement followed by an insert to add the new active record. Playing around with the merge statement you can actually expire the current record and insert a new record within one clean statement. This is how the statement works, we do the normal merge statement to insert a record when there is no match, if we match the record we update the existing record by expiring it and deactivating. At the end of the merge statement we use the output statement to output the staging values for the update,  we wrap the whole merge statement within an insert statement and add new rows for the records which we inserted. I’ve added the full script at the bottom so you can paste it and play around.   1: INSERT INTO ExampleFactUpdate 2: (PolicyID, 3: Status) 4: SELECT -- these columns are returned from the output statement 5: PolicyID, 6: Status 7: FROM 8: ( 9: -- merge statement on unique id in this case Policy_ID 10: MERGE dbo.ExampleFactUpdate dp 11: USING dbo.ExampleStag s 12: ON dp.PolicyID = s.PolicyID 13: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 14: INSERT (PolicyID,Status) 15: VALUES (s.PolicyID, s.Status) 16: WHEN MATCHED --if it already exists 17: AND ExpiryDate IS NULL -- and the Expiry Date is null 18: THEN 19: UPDATE 20: SET 21: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 22: dp.Active = 0 -- and deactivate the existing record 23: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 24: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 25: WHERE -- we'll filter using a where clause 26: MergeAction = 'Update'; -- here   Complete source for example 1: if OBJECT_ID('ExampleFactUpdate') > 0 2: drop table ExampleFactUpdate 3:  4: Create Table ExampleFactUpdate( 5: ID int identity(1,1), 3: go 6: PolicyID varchar(100), 7: Status varchar(100), 8: EffectiveDate datetime default getdate(), 9: ExpiryDate datetime, 10: Active bit default 1 11: ) 12:  13:  14: insert into ExampleFactUpdate( 15: PolicyID, 16: Status) 17: select 18: 1, 19: 'Live' 20:  21: /*Create Staging Table*/ 22: if OBJECT_ID('ExampleStag') > 0 23: drop table ExampleStag 24: go 25:  26: /*Create example fact table */ 27: Create Table ExampleStag( 28: PolicyID varchar(100), 29: Status varchar(100)) 30:  31: --add some data 32: insert into ExampleStag( 33: PolicyID, 34: Status) 35: select 36: 1, 37: 'Lapsed' 38: union all 39: select 40: 2, 41: 'Quote' 42:  43: select * 44: from ExampleFactUpdate 45:  46: select * 47: from ExampleStag 48:  49:  50: INSERT INTO ExampleFactUpdate 51: (PolicyID, 52: Status) 53: SELECT -- these columns are returned from the output statement 54: PolicyID, 55: Status 56: FROM 57: ( 58: -- merge statement on unique id in this case Policy_ID 59: MERGE dbo.ExampleFactUpdate dp 60: USING dbo.ExampleStag s 61: ON dp.PolicyID = s.PolicyID 62: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 63: INSERT (PolicyID,Status) 64: VALUES (s.PolicyID, s.Status) 65: WHEN MATCHED --if it already exists 66: AND ExpiryDate IS NULL -- and the Expiry Date is null 67: THEN 68: UPDATE 69: SET 70: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 71: dp.Active = 0 -- and deactivate the existing record 72: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 73: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 74: WHERE -- we'll filter using a where clause 75: MergeAction = 'Update'; -- here 76:  77:  78: select * 79: from ExampleFactUpdate 80: 

  Read the article

• Problems with 3D Array for Voxel Data

  - by Sean M.

  I'm trying to implement a voxel engine in C++ using OpenGL, and I've been working on the rendering of the world. In order to render, I have a 3D array of uint16's that hold that id of the block at the point. I also have a 3D array of uint8's that I am using to store the visibility data for that point, where each bit represents if a face is visible. I have it so the blocks render and all of the proper faces are hidden if needed, but all of the blocks are offset by a power of 2 from where they are stored in the array. So the block at [0][0][0] is rendered at (0, 0, 0), and the block at 11 is rendered at (1, 1, 1), but the block at [2][2][2] is rendered at (4, 4, 4) and the block at [3][3][3] is rendered at (8, 8, 8), and so on and so forth. This is the result of drawing the above situation: I'm still a little new to the more advanced concepts of C++, like triple pointers, which I'm using for the 3D array, so I think the error is somewhere in there. This is the code for creating the arrays: uint16*** _blockData; //Contains a 3D array of uint16s that are the ids of the blocks in the region uint8*** _visibilityData; //Contains a 3D array of bytes that hold the visibility data for the faces //Allocate memory for the world data _blockData = new uint16**[REGION_DIM]; for (int i = 0; i < REGION_DIM; i++) { _blockData[i] = new uint16*[REGION_DIM]; for (int j = 0; j < REGION_DIM; j++) _blockData[i][j] = new uint16[REGION_DIM]; } //Allocate memory for the visibility _visibilityData = new uint8**[REGION_DIM]; for (int i = 0; i < REGION_DIM; i++) { _visibilityData[i] = new uint8*[REGION_DIM]; for (int j = 0; j < REGION_DIM; j++) _visibilityData[i][j] = new uint8[REGION_DIM]; } Here is the code used to create the block mesh for the region: //Check if the positive x face is visible, this happens for every face //Block::VERT_X_POS is just an array of non-transformed cube verts for one face //These checks are in a triple loop, which goes over every place in the array if (_visibilityData[x][y][z] & 0x01 > 0) { _vertexData->AddData(&(translateVertices(Block::VERT_X_POS, x, y, z)[0]), sizeof(Block::VERT_X_POS)); } //This is a seperate method, not in the loop glm::vec3* translateVertices(const glm::vec3 data[], uint16 x, uint16 y, uint16 z) { glm::vec3* copy = new glm::vec3[6]; memcpy(&copy, &data, sizeof(data)); for(int i = 0; i < 6; i++) copy[i] += glm::vec3(x, -y, z); //Make +y go down instead return copy; } I cannot see where the blocks may be getting offset by more than they should be, and certainly not why the offsets are a power of 2. Any help is greatly appreciated. Thanks.

  Read the article

• Indexed view deadlocking

  - by Dave Ballantyne

  Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

  Read the article

• PECL OCI8 2.0 Production Release Announcement

  - by cj

  The PHP OCI8 2.0.6 extension for Oracle Database is now "production" status. The source code is available on PECL. This can be used immediately to update your OCI8 extension in PHP 5.2 and later versions. The extension compiles with Oracle 10.2 or later client libraries. Oracle's standard cross-version database connectivity applies. OCI8 2.0 and PHP 5.5.5 RPMs for Oracle and Red Hat Linux are available from oss.oracle.com. Windows DLLs are available on PECL for PHP 5.3, PHP 5.4 and PHP 5.5. OCI8 2.0 source code will also be automatically included in the next major version of PHP. New Functionality Oracle Database 12c Implicit Result Set support. IRS's make it easy to pass query results back from stored PL/SQL procedures or anonymous PL/SQL blocks. Individual IRS statement resources, each corresponding to a single query, can be obtained with the new function oci_get_implicit_resultset(). These 'child' statement resources can be passed to any oci_fetch_* function. See Using PHP and Oracle Database 12c Implicit Result Sets and the PHP Manual: oci_get_implicit_resultset(). DTrace Dynamic Trace static probes. This well respected DTrace tracing framework is available on a number of platforms, including Oracle Linux. PHP OCI8 static user-space probes can be enabled with PHP's --enable-dtrace configuration option. See Using PHP DTrace on Oracle Linux. Documentation is also available in the PHP Manual OCI8 and DTrace Dynamic Tracing Improved Functionality Using oci_execute($s, OCI_NO_AUTO_COMMIT) for a SELECT no longer unnecessarily initiates an internal ROLLBACK during connection close. This can improve overall scalability by reducing "round trips" between PHP and the database. Changed Functionality PHP OCI8 2.0's minimum pre-requisites are now PHP 5.2 and Oracle client library 10.2. Later versions of both are usable and, in fact, recommended. Use the older PHP OCI8 1.4.10 extension when using PHP 4.3.9 through to PHP 5.1.x, or when only Oracle Database 9.2 client libraries are available. oci_set_*($connection, ...) meta data setting call error handling is fixed so that oci_error($connection) works for these calls. Note: The old, deprecated function aliases like ocilogon still exist but are not recommended for new applications. Phpinfo() Changes Some cosmetic changes were made to the output of php --ri oci8 and the phpinfo() function. The oci8.event and oci8.connection_class values are now shown only when the Oracle client libraries support the respective functionality. Connection statistics are now in a separate phpinfo() table. Temporary LOB and Collection support status lines in phpinfo() output were removed. These two features have always been enabled since 2007. Oci_internal_debug() Changes The oci_internal_debug() function is now a no-op. Use PHP's --enable-dtrace functionality with DTrace or SystemTap instead. References OCI8 Extension source code and Windows DLLs http://pecl.php.net/package/oci8 Oracle Linux RPMs oss.oracle.com PHP Manual for OCI8 OCI8 and DTrace Dynamic Tracing Oracle OpenWorld Conference paper What's New in Oracle Database 12c for PHP

  Read the article

• VirtualBox 3.2 is released! A Red Letter Day?

  - by Fat Bloke

  Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

  Read the article

• Cloud Backup: Getting the Users' Backs Up

  - by Tony Davis

  On Wednesday last week, Microsoft announced that as of July 1, all data transfers into its Microsoft Azure cloud will be free (though you have to pay for transferring data out). On Thursday last week, SQL Azure in Western Europe went down. It was a relatively short outage, but since SQL Azure currently provides no easy way to take a standard backup of a database and store it locally, many people had no recourse but to wait patiently for their cloud-based app to resume. It seems that Microsoft are very keen encourage developers to move their data onto their cloud, but are developers ready to do it, given that such basic backup capabilities are lacking? Recently on Simple-Talk, Mike Mooney described a perfect use case for the Microsoft Cloud. They had a simple web-based application with a SQL Server backend; they could move the application to Windows Azure, and the data into SQL Azure and in the process free themselves from much of the hassle surrounding management and scaling of the hardware, network and so on. It was a great fit and yet it nearly didn't happen; lack of support for the BACKUP command almost proved a show-stopper. Of course, backups of Azure databases are always and have always been taken automatically, for disaster recovery purposes, but these are strictly on-cloud copies and as of now it is not possible to use them to them to restore a database to a particular point in time. It seems that none of those clever Microsoft people managed to predict the need to perform basic backups of Azure databases so that copies could be stored locally, outside the Azure universe. At the very least, as Mike points out, performing a local backup before a new deployment is more or less mandatory. Microsoft did at least note the sound of gnashing teeth and, as a stop-gap measure, offered SQL Azure Database Copy which basically allows you to create an online clone of your database, but this doesn't allow for storing local archives of the data. To that end MS has provided SQL Azure Import/Export, to package up and export a database and its data, using BACPACs. These BACPACs do not guarantee transactional consistency; for example, if a child table is modified after the parent is copied, then the copied database will be in inconsistent state (meaning, to add to the fun, BACPACs need to be created from a database copy). In any event, widespread problems with BACPAC's evil cousin, the DACPAC have been well-documented, and it seems likely that many will also give BACPAC the bum's rush. Finally, in a TechEd 2011 presentation tagged "SQL Azure Advanced Administration", it was announced that "backup and restore" were coming in the next SQL Azure CTP. And yet this still doesn't mean that we'll get simple backups as DBAs know and love them. What it does mean, at least, is the ability to restore any given database to a point in time within a 2-week window. For the time being, if you want a local copy of your data and don't want to brave the BACPAC, one is left with SSIS or BCP, creative use of schema and data comparison tools, or use of SQL Azure Backup (currently in beta) in order to perform this simple but vital task. Cheers, Tony.

  Read the article

• Collision detection via adjacent tiles - sprite too big

  - by BlackMamba

  I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

  Read the article

• Future Of F# At Jazoon 2011

  - by Alois Kraus

  I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

  Read the article

• Protecting Consolidated Data on Engineered Systems

  - by Steve Enevold

  In this time of reduced budgets and cost cutting measures in Federal, State and Local governments, the requirement to provide services continues to grow. Many agencies are looking at consolidating their infrastructure to reduce cost and meet budget goals. Oracle's engineered systems are ideal platforms for accomplishing these goals. These systems provide unparalleled performance that is ideal for running applications and databases that traditionally run on separate dedicated environments. However, putting multiple critical applications and databases in a single architecture makes security more critical. You are putting a concentrated set of sensitive data on a single system, making it a more tempting target.  The environments were previously separated by iron so now you need to provide assurance that one group, department, or application's information is not visible to other personnel or applications resident in the Exadata system. Administration of the environments requires formal separation of duties so an administrator of one application environment cannot view or negatively impact others. Also, these systems need to be in protected environments just like other critical production servers. They should be in a data center protected by physical controls, network firewalls, intrusion detection and prevention, etc Exadata also provides unique security benefits, including a reducing attack surface by minimizing packages and services to only those required. In addition to reducing the possible system areas someone may attempt to infiltrate, Exadata has the following features: 1.    Infiniband, which functions as a secure private backplane 2.    IPTables  to perform stateful packet inspection for all nodes               Cellwall implements firewall services on each cell using IPTables 3.    Hardware accelerated encryption for data at rest on storage cells Oracle is uniquely positioned to provide the security necessary for implementing Exadata because security has been a core focus since the company's beginning. In addition to the security capabilities inherent in Exadata, Oracle security products are all certified to run in an Exadata environment. Database Vault Oracle Database Vault helps organizations increase the security of existing applications and address regulatory mandates that call for separation-of-duties, least privilege and other preventive controls to ensure data integrity and data privacy. Oracle Database Vault proactively protects application data stored in the Oracle database from being accessed by privileged database users. A unique feature of Database Vault is the ability to segregate administrative tasks including when a command can be executed, or that the DBA can manage the health of the database and objects, but may not see the data Advanced Security  helps organizations comply with privacy and regulatory mandates by transparently encrypting all application data or specific sensitive columns, such as credit cards, social security numbers, or personally identifiable information (PII). By encrypting data at rest and whenever it leaves the database over the network or via backups, Oracle Advanced Security provides the most cost-effective solution for comprehensive data protection. Label Security  is a powerful and easy-to-use tool for classifying data and mediating access to data based on its classification. Designed to meet public-sector requirements for multi-level security and mandatory access control, Oracle Label Security provides a flexible framework that both government and commercial entities worldwide can use to manage access to data on a "need to know" basis in order to protect data privacy and achieve regulatory compliance  Data Masking reduces the threat of someone in the development org taking data that has been copied from production to the development environment for testing, upgrades, etc by irreversibly replacing the original sensitive data with fictitious data so that production data can be shared safely with IT developers or offshore business partners  Audit Vault and Database Firewall Oracle Audit Vault and Database Firewall serves as a critical detective and preventive control across multiple operating systems and database platforms to protect against the abuse of legitimate access to databases responsible for almost all data breaches and cyber attacks.  Consolidation, cost-savings, and performance can now be achieved without sacrificing security. The combination of built in protection and Oracle’s industry-leading data protection solutions make Exadata an ideal platform for Federal, State, and local governments and agencies.

  Read the article

• Creating a Corporate Data Hub

  - by BuckWoody

  The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

  Read the article

• Custom Templates: Using user exits

  - by Anthony Shorten

  One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

  Read the article

• New R Interface to Oracle Data Mining Available for Download

  - by charlie.berger

    The R Interface to Oracle Data Mining ( R-ODM) allows R users to access the power of Oracle Data Mining's in-database functions using the familiar R syntax. R-ODM provides a powerful environment for prototyping data analysis and data mining methodologies. R-ODM is especially useful for: Quick prototyping of vertical or domain-based applications where the Oracle Database supports the application Scripting of "production" data mining methodologies Customizing graphics of ODM data mining results (examples: classification, regression, anomaly detection) The R-ODM interface allows R users to mine data using Oracle Data Mining from the R programming environment. It consists of a set of function wrappers written in source R language that pass data and parameters from the R environment to the Oracle RDBMS enterprise edition as standard user PL/SQL queries via an ODBC interface. The R-ODM interface code is a thin layer of logic and SQL that calls through an ODBC interface. R-ODM does not use or expose any Oracle product code as it is completely an external interface and not part of any Oracle product. R-ODM is similar to the example scripts (e.g., the PL/SQL demo code) that illustrates the use of Oracle Data Mining, for example, how to create Data Mining models, pass arguments, retrieve results etc. R-ODM is packaged as a standard R source package and is distributed freely as part of the R environment's Comprehensive R Archive Network (CRAN). For information about the R environment, R packages and CRAN, see www.r-project.org. R-ODM is particularly intended for data analysts and statisticians familiar with R but not necessarily familiar with the Oracle database environment or PL/SQL. It is a convenient environment to rapidly experiment and prototype Data Mining models and applications. Data Mining models prototyped in the R environment can easily be deployed in their final form in the database environment, just like any other standard Oracle Data Mining model. What is R? R is a system for statistical computation and graphics. It consists of a language plus a run-time environment with graphics, a debugger, access to certain system functions, and the ability to run programs stored in script files. The design of R has been heavily influenced by two existing languages: Becker, Chambers & Wilks' S and Sussman's Scheme. Whereas the resulting language is very similar in appearance to S, the underlying implementation and semantics are derived from Scheme. R was initially written by Ross Ihaka and Robert Gentleman at the Department of Statistics of the University of Auckland in Auckland, New Zealand. Since mid-1997 there has been a core group (the "R Core Team") who can modify the R source code archive. Besides this core group many R users have contributed application code as represented in the near 1,500 publicly-available packages in the CRAN archive (which has shown exponential growth since 2001; R News Volume 8/2, October 2008). Today the R community is a vibrant and growing group of dozens of thousands of users worldwide. It is free software distributed under a GNU-style copyleft, and an official part of the GNU project ("GNU S"). Resources: R website / CRAN R-ODM

  Read the article

• Where to store front-end data for "object calculator"

  - by Justin Grahn

  I recently have completed a language library that acts as a giant filter for food items, and flows a bit like this :Products -> Recipes -> MenuItems -> Meals and finally, upon submission, creates an Order. I have also completed a database structure that stores all the pertinent information to each class, and seems to fit my needs. The issue I'm having is linking the two. I imagined all of the information being local to each instance of the product, where there exists one backend user who edits and manipulates data, and multiple front end users who select their Meal(s) to create an Order. Ideally, all of the front end users would have all of this information stored locally within the library, and would update the library on startup from a database. How should I go about storing the data so that I can load it into the library every time the user opens the application? Do I package a database onboard and just load and populate every time? The only method I can currently conceive of doing this, even if I only have 500 possible Product objects, would require me to foreach the list for every Product that I need to match to a Recipe and so on and so forth every time I relaunch the program, which seems like a lot of wasteful loading. Here is a general flow of my architecture: Products: public class Product : IPortionable { public Product(string n, uint pNumber = 0) { name = n; productNumber = pNumber; } public string name { get; set; } public uint productNumber { get; set; } } Recipes: public Recipe(string n, decimal yieldAmt, Volume.Unit unit) { name = n; yield = new Volume(yieldAmt, unit); yield.ConvertUnit(); } /// <summary> /// Creates a new ingredient object /// </summary> /// <param name="n">Name</param> /// <param name="yieldAmt">Recipe Yield</param> /// <param name="unit">Unit of Yield</param> public Recipe(string n, decimal yieldAmt, Weight.Unit unit) { name = n; yield = new Weight(yieldAmt, unit); } public Recipe(Recipe r) { name = r.name; yield = r.yield; ingredients = r.ingredients; } public string name { get; set; } public IMeasure yield; public Dictionary<IPortionable, IMeasure> ingredients = new Dictionary<IPortionable,IMeasure>(); MenuItems: public abstract class MenuItem : IScalable { public static string title = null; public string name { get; set; } public decimal maxPortionSize { get; set; } public decimal minPortionSize { get; set; } public Dictionary<IPortionable, IMeasure> ingredients = new Dictionary<IPortionable, IMeasure>(); and Meal: public class Meal { public Meal(int guests) { guestCount = guests; } public int guestCount { get; private set; } //TODO: Make a new MainCourse class that holds pasta and Entree public Dictionary<string, int> counts = new Dictionary<string, int>(){ {MainCourse.title, 0}, {Side.title , 0}, {Appetizer.title, 0} }; public List<MenuItem> items = new List<MenuItem>(); The Database just stores and links each of these basic names and amounts together usings ID's (RecipeID, ProductID and MenuItemID)

  Read the article

• Reducing Deadlocks - not a DBA issue ?

  - by steveh99999

   As a DBA, I'm involved on an almost daily basis troubleshooting 'SQL Server' performance issues. Often, this troubleshooting soon veers away from a 'its a SQL Server issue' to instead become a wider application/database design/coding issue.One common perception with SQL Server is that deadlocking is an application design issue - and is fixed by recoding...  I see this reinforced by MCP-type questions/scenarios where the answer to prevent deadlocking is simply to change the order in code in which tables are accessed....Whilst this is correct, I do think this has led to a situation where many 'operational' or 'production support' DBAs, when faced with a deadlock, are happy to throw the issue over to developers without analysing the issue further....A couple of 'war stories' on deadlocks which I think are interesting :- Case One , I had an issue recently on a third-party application that I support on SQL 2008.  This particular third-party application has an unusual support agreement where the customer is allowed to change the index design on the third-party provided database.  However, we are not allowed to alter application code or modify table structure..This third-party application is also known to encounter occasional deadlocks – indeed, I have documentation from the vendor that up to 50 deadlocks per day is not unusual !So, as a DBA I have to support an application which in my opinion has too many deadlocks - but, I cannot influence the design of the tables or stored procedures for the application. This should be the classic - blame the third-party developers scenario, and hope this issue gets addressed in a future application release - ie we could wait years for this to be resolved and implemented in our production environment...But, as DBAs  can change the index layout, is there anything I could do still to reduce the deadlocks in the application ?I initially used SQL traceflag 1222 to write deadlock detection output to the SQL Errorlog – using this I was able to identify one table heavily involved in the deadlocks.When I examined the table definition, I was surprised to see it was a heap – ie no clustered index existed on the table.Using SQL profiler to see locking behaviour and plan for the query involved in the deadlock, I was able to confirm a table scan was being performed.By creating an appropriate clustered index - it was possible to produce a more efficient plan and locking behaviour.So, less locks, held for less time = less possibility of deadlocks. I'm still unhappy about the overall number of deadlocks on this system - but that's something to be discussed further with the vendor.Case Two,  a system which hadn't changed for months suddenly started seeing deadlocks on a regular basis. I love the 'nothing's changed' scenario, as it gives me the opportunity to appear wise and say 'nothings changed on this system, except the data'.. This particular deadlock occurred on a table which had been growing rapidly. By using DBCC SHOW_STATISTICS - the DBA team were able to see that the deadlocks seemed to be occurring shortly after auto-update stats had regenerated the table statistics using it's default sampling behaviour.As a quick fix, we were able to schedule a nightly UPDATE STATISTICS WITH FULLSCAN on the table involved in the deadlock - thus, greatly reducing the potential for stats to be updated via auto_update_stats, consequently reducing the potential for a bad plan to be generated based on an unrepresentative sample of the data. This reduced the possibility of a deadlock occurring.  Not a perfect solution by any means, but quick, easy to implement, and needed no application code changes. This fix gave us some 'breathing space'  to properly fix the code during the next scheduled application release.   The moral of this post - don't dismiss deadlocks as issues that can only be fixed by developers...

  Read the article

• PowerShell: Read Excel to Create Inserts

  - by BuckWoody

  I’m writing a series of articles on how to migrate “departmental” data into SQL Server. I also hold workshops on the entire process – from discovering that the data exists to the modeling process and then how to design the Extract, Transform and Load (ETL) process. Finally I write about (and teach) a few methods on actually moving the data. One of those options is to use PowerShell. There are a lot of ways even with that choice, but the one I show is to read two columns from the spreadsheet and output statements that would insert the data using a stored procedure. Of course, you could re-write this as INSERT statements, out to a text file for bcp, or even use a database connection in the script to move the data directly from Excel into SQL Server. This snippet won’t run on your system, of course – it assumes a Microsoft Office Excel 2007 spreadsheet located at c:\temp called VendorList.xlsx. It looks for a tab in that spreadsheet called Vendors. The statement that does the writing just uses one column: Vendor Code. Here’s the breakdown of what I’m doing: In the first block, I connect to Microsoft Office Excel. That connection string is specific to Excel 2007, so if you need a different version you’ll need to look that up. In the second block I set up a selection from the entire spreadsheet based on that tab. Note that if you’re only after certain data you shouldn’t get the whole spreadsheet – that’s just good practice. In the next block I create the text I want, inserting the Vendor Code field as I go. Finally I close the connection. Enjoy! $ExcelConnection= New-Object -com "ADODB.Connection" $ExcelFile="c:\temp\VendorList.xlsx" $ExcelConnection.Open("Provider=Microsoft.ACE.OLEDB.12.0;` Data Source=$ExcelFile;Extended Properties=Excel 12.0;") $strQuery="Select * from [Vendors$]" $ExcelRecordSet=$ExcelConnection.Execute($strQuery) do { Write-Host "EXEC sp_InsertVendors '" $ExcelRecordSet.Fields.Item("Vendor Code").Value "'" $ExcelRecordSet.MoveNext()} Until ($ExcelRecordSet.EOF) $ExcelConnection.Close() Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• SQL SERVER – Last Two Days to Get FREE Book – Joes 2 Pros Certification 70-433

  - by pinaldave

  Earlier this week we announced that we will be giving away FREE SQL Wait Stats book to everybody who will get SQL Server Joes 2 Pros Combo Kit. We had a fantastic response to the contest. We got an overwhelming response to the offer. We knew there would be a great response but we want to honestly say thank you to all of you for making it happen. Rick and I want to make sure that we express our special thanks to all of you who are reading our books. The offer is still on and there are two more days to avail this offer. We want to make sure that everybody who buys our most selling combo kits, we will send our other most popular SQL Wait Stats book. Please read all the details of the offer here. The books are great resources for anyone who wants to learn SQL Server from fundamentals and eventually go on the certification path of 70-433. Exam 70-433 contains following important subject and the book covers the subject of fundamental. If you are taking the exam or not taking the exam – this book is for every SQL Developer to learn the subject from fundamentals.  Create and alter tables. Create and alter views. Create and alter indexes. Create and modify constraints. Implement data types. Implement partitioning solutions. Create and alter stored procedures. Create and alter user-defined functions (UDFs). Create and alter DML triggers. Create and alter DDL triggers. Create and deploy CLR-based objects. Implement error handling. Manage transactions. Query data by using SELECT statements. Modify data by using INSERT, UPDATE, and DELETE statements. Return data by using the OUTPUT clause. Modify data by using MERGE statements. Implement aggregate queries. Combine datasets. INTERSECT, EXCEPT Implement subqueries. Implement CTE (common table expression) queries. Apply ranking functions. Control execution plans. Manage international considerations. Integrate Database Mail. Implement full-text search. Implement scripts by using Windows PowerShell and SQL Server Management Objects (SMOs). Implement Service Broker solutions. Track data changes. Data capture Retrieve relational data as XML. Transform XML data into relational data. Manage XML data. Capture execution plans. Collect output from the Database Engine Tuning Advisor. Collect information from system metadata. Availability of Book USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Big Data – ClustrixDB – Extreme Scale SQL Database with Real-time Analytics, Releases Software Download – NewSQL

  - by Pinal Dave

  There are so many things to learn and there is so little time we all have. As we have little time we need to be selective to learn whatever we learn. I believe I know quite a lot of things in SQL but I still do not know what is around SQL. I have started to learn about NewSQL recently. If you wonder what is NewSQL I encourage all of you to read my blog post about NewSQL over here Big Data – Buzz Words: What is NewSQL – Day 10 of 21. NewSQL databases are quickly becoming popular – providing the scale of NoSQL with the SQL features and transactions. As a part of learning NewSQL database, I have recently started to learn about ClustrixDB. ClustrixDB has been the most mature NewSQL database used by some of the largest internet sites in the world for over 3 years, with extensive SQL support. In addition to scale, it provides fast real-time analytics by bringing massively parallel processing (MPP), available only in warehousing databases, to the transactional database. The reason I am more intrigued about learning ClustrixDB is their recent announcement on Oct 31. ClustrixDB was only available as an appliance, but now with their software release on Oct 31, everyone can use it. It is now available as forever free for up to 12 cores with community support, and there is a 45 day trial for unlimited cluster sizes. With the forever free world, I am indeed interested in ClustrixDB now. I know that few of the leading eCommerce sites in the world uses them for their transactional database. Here are few of the details I have quickly noted for ClustrixDB. ClustrixDB allows user to: Scale by simply adding nodes to the cluster with a single command Run billions of transactions a day Run fast real-time analytics Achieve high-availability with recovery from node failure Manages itself Easily migrate from MySQL as it is nearly plug-and-play compatible, use MySQL drivers, tools and replication. While I was going through the documentation I realized that ClustrixDB also has extensive support for SQL features including complex queries involving joins on a dozen or more tables, aggregates, sorts, sub-queries. It also supports stored procedures, triggers, foreign keys, partitioned and temporary tables, and fully online schema changes. It is indeed a very matured product and SQL solution. Indeed Clusterix sound very promising solution, I decided to dig a bit deeper to understand who are current customers of the Clustrix as they exist in the industry for quite a few years. Their client list is indeed very interesting and here is my quick research about them. Twoo.com – Europe’s largest social discovery (dating) site runs 4.4 Billion Transactions a day with table sizes over a Terabyte, on a 168 core cluster. EngageBDR – Top 3 in the online advertising category uses ClustrixDB to serve 6.9 billion ads a day through real-time bidding platform. Their reports went from 4 hours to 15 seconds. NoMoreRack – Top 2 fastest growing e-commerce company in US used ClustrixDB for high availability and fast growth through Amazon cloud. MakeMyTrip – India’s leading travel site runs on ClustrixDB with two clusters running as multi-master in Chennai and Bangalore. Many enterprises such as AOL, CSC, Rakuten, Symantec use ClustrixDB when their applications need scale. I must accept that I am impressed with the information I have learned so far and now is the time to do some hand’s on experience with their product. I want to learn this technology so in future when it is about NewSQL, I know what I am talking about. Read more why Clustrix explains why you ClustrixDB might be the right database for you. Download ClustrixDB with me today and install it on your machine so in future when we discuss the technical aspects of it, we all are on the same page. The software can be downloaded here. Reference : Pinal Dave (http://blog.SQLAuthority.com)Filed under: Big Data, MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Clustrix

  Read the article

• How do I cap rendering of tiles in a 2D game with SDL?

  - by farmdve

  I have some boilerplate code working, I basically have a tile based map composed of just 3 colors, and some walls and render with SDL. The tiles are in a bmp file, but each tile inside it corresponds to an internal number of the type of tile(color, or wall). I have pretty basic collision detection and it works, I can also detetc continuous presses, which allows me to move pretty much anywhere I want. I also have a moving camera, which follows the object. The problem is that, the tile based map is bigger than the resolution, thus not all of the map can be displayed on the screen, but it's still rendered. I would like to cap it, but since this is new to me, I pretty much have no idea. Although I cannot post all the code, as even though I am a newbie and the code pretty basic, it's already quite a few lines, I can post what I tried to do void set_camera() { //Center the camera over the dot camera.x = ( player.box.x + DOT_WIDTH / 2 ) - SCREEN_WIDTH / 2; camera.y = ( player.box.y + DOT_HEIGHT / 2 ) - SCREEN_HEIGHT / 2; //Keep the camera in bounds. if(camera.x < 0 ) { camera.x = 0; } if(camera.y < 0 ) { camera.y = 0; } if(camera.x > LEVEL_WIDTH - camera.w ) { camera.x = LEVEL_WIDTH - camera.w; } if(camera.y > LEVEL_HEIGHT - camera.h ) { camera.y = LEVEL_HEIGHT - camera.h; } } set_camera() is the function which calculates the camera position based on the player's positions. I won't pretend I know much about it. Rectangle box = {0,0,0,0}; for(int t = 0; t < TOTAL_TILES; t++) { if(box.x < (camera.x - TILE_WIDTH) || box.y > (camera.y - TILE_HEIGHT)) apply_surface(box.x - camera.x, box.y - camera.y, surface, screen, &clips[tiles[t]]); box.x += TILE_WIDTH; //If we've gone too far if(box.x >= LEVEL_WIDTH) { //Move back box.x = 0; //Move to the next row box.y += TILE_HEIGHT; } } This is basically my render code. The for loop loops over 192 tiles stored in an int array, each with their own unique value describing the tile type(wall or one of three possible colored tiles). box is an SDL_Rect containing the current position of the tile, which is calculated on render. TILE_HEIGHT and TILE_WIDTH are of value 80. So the cap is determined by if(box.x < (camera.x - TILE_WIDTH) || box.y > (camera.y - TILE_HEIGHT)) However, this is just me playing with the values and see what doesn't break it. I pretty much have no idea how to calculate it. My screen resolution is 1024/768, and the tile map is of size 1280/960.

  Read the article

• Openmatics Revolutionizes Fleet Management with Standards-Based Vehicle Telematics Platform

  - by Michael Snow

  Openmatics s.r.o. was founded in 2010 as a subsidiary of ZF Friedrichshafen AG, a global player in driveline and chassis technology. Oracle Customer:  Openmatics s.r.o.Location:  Pilsen, Czech RepublicIndustry:  AutomotiveEmployees:  70 Its goal was to develop and operate a flexible, open telematics platform for automotive applications, which is independent from vehicle and component suppliers—recognizing that the fragmented telematics market was not meeting today’s fleet management needs. Openmatics provides a rich product portfolio, and customers can extend the platform, as required, to meet their needs. Partners and third-parties can develop their own applications using the Openmatics’ software development kit and can sell them via the Openmatics app shop.ZF Friedrichshafen AG is a global player in driveline and chassis technology. With 121 production companies and 650 service partners in 26 countries, ZF is among the top 10 largest automotive suppliers worldwide. Founded in 1915 to develop and produce transmissions for airships and vehicles, the group’s product offerings now include transmissions and steering systems as well as chassis components and complete axle systems and modules.  A word from Openmatics s.r.o.  “Oracle WebCenter Portal, together with the underlying Oracle Application Development Framework, provided the fundamental infrastructure for the Openmatics platform. Fleet managers can now reduce fuel consumption and operating costs, and more efficiently manage vehicle usage, maintenance, and safety. The standards-based platform allows third-party suppliers to deploy their own vehicle telematics services as Openmatics apps and creates a de facto standard for the automotive industry, independent from a single manufacturer or service provider.” – Gero Strobel, Head of Development, Openmatics s.r.o. Challenges Create an industry standard for vehicle telematics by establishing a customizable platform that enables access to telematics information, such as current and past fuel consumption, through a web browser to better meet automotive market and customer needs Reduce fleet-management costs by eliminating the need to invest in isolated telematics hardware and software solutions per vehicle brand and vehicle component manufacturer Establish an open platform where third-party providers—such as original equipment manufacturers (OEM), insurers, fleet operators, and individual developers—can deploy their own vehicle telematics services Allow users to purchase targeted telematics services as single apps to reduce costs and ensure rapid growth of telematics services available on the platform Enable users to configure their telematics apps with ease to make sure the platform meets individual fleet management requirements, such as analyzing past and current fuel consumption of a truck fleet Solutions Deployed Oracle WebCenter Portal as a foundation for Openmatics, a standards-based automotive telematics platform that provides next-generation fleet management with unified digital communication from and to vehicles on the move Used Oracle Application Development Framework as the development framework for Oracle WebCenter Portal’s components and services, providing developers with ready-to-use software development kits with application programming interfaces, design templates, and visual tools that accelerated time to market Used Oracle Enterprise Pack for Eclipse to simplify telematics application development in Java Enabled fleet monitoring by recording vehicle data—such as fuel consumption information—through onboard units, delivering the information to Oracle Database, and making it accessible through a customizable app portfolio on any web browser Stored vehicle telematics data—sent as encrypted information—in Oracle Database, ensuring data integrity and immediate availability for the platform’s telematics applications Enabled a wide range of telematics services suppliers, from vehicle component manufacturers to fleet application developers, to offer vehicle telematics services on the Openmatics platform, ensuring platform independence from OEMs Provided Openmatics customers with the means to individually select the automotive telematics services that are relevant to their business requirements, eliminating the need to pay for superfluous information and reducing fleet management costs Oracle Products & Services Oracle Application Development Framework Oracle WebCenter Portal Oracle SOA Suite Oracle Enterprise Pack for Eclipse Oracle Database Oracle Consulting &amp;amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;gt;amp;&amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;gt;lt;p&amp;amp;amp;amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;amp;amp;amp;lt;/p&amp;amp;amp;amp;amp;amp;amp;amp;gt;

  Read the article

• Utility to Script SQL Server Configuration

  - by Bill Graziano

  I wrote a small utility to script some key SQL Server configuration information. I had two goals for this utility: Assist with disaster recovery preparation Identify configuration changes I’ve released the application as open source through CodePlex. You can download it from CodePlex at the Script SQL Server Configuration project page. The application is a .NET 2.0 console application that uses SMO. It writes its output to a directory that you specify.  Disaster Planning ScriptSqlConfig generates scripts for logins, jobs and linked servers.  It writes the properties and configuration from the instance to text files. The scripts are designed so they can be run against a DR server in the case of a disaster. The properties and configuration will need to be manually compared. Each job is scripted to its own file. Each linked server is scripted to its own file. The linked servers don’t include the password if you use a SQL Server account to connect to the linked server. You’ll need to store those somewhere secure. All the logins are scripted to a single file. This file includes windows logins, SQL Server logins and any server role membership.  The SQL Server logins are scripted with the correct SID and hashed passwords. This means that when you create the login it will automatically match up to the users in the database and have the correct password. This is the only script that I programmatically generate rather than using SMO. The SQL Server configuration and properties are scripted to text files. These will need to be manually reviewed in the event of a disaster. Or you could DIFF them with the configuration on the new server. Configuration Changes These scripts and files are all designed to be checked into a version control system.  The scripts themselves don’t include any date specific information. In my environments I run this every night and check in the changes. I call the application once for each server and script each server to its own directory.  The process will delete any existing files before writing new ones. This solved the problem I had where the scripts for deleted jobs and linked servers would continue to show up.  To see any changes I just need to query the version control system to show many any changes to the files. Database Scripting Utilities that script database objects are plentiful.  CodePlex has at least a dozen of them including one I wrote years ago. The code is so easy to write it’s hard not to include that functionality. This functionality wasn’t high on my list because it’s included in a database backup.  Unless you specify the /nodb option, the utility will script out many user database objects. It will script one object per file. It will script tables, stored procedures, user-defined data types, views, triggers, table types and user-defined functions. I know there are more I need to add but haven’t gotten around it yet. If there’s something you need, please log an issue and get it added. Since it scripts one object per file these really aren’t appropriate to recreate an empty database. They are really good for checking into source control every night and then seeing what changed. I know everyone tells me all their database objects are in source control but a little extra insurance never hurts. Conclusion I hope this utility will help a few of you out there. My goal is to have it script all server objects that aren’t contained in user databases. This should help with configuration changes and especially disaster recovery.

  Read the article

• nvidia driver problems after upgrading to 3.2.0-26 on Ubuntu 12.04 64bit

  - by Lev Levitsky

  After installing latest updates I can't set screen resolution higher than 1024x768; every time after the boot I get a message Could not apply the stored configuration for the monitors (Note: removing ~/.config/monitors.xml stopped the message, but not the problem) I can boot with 3.2.0-25 and the graphics look normal. Here's what I have in /var/log/apt/term.log (excerpt): Setting up linux-image-3.2.0-26-generic (3.2.0-26.41) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Error! Problems with depmod detected. Automatically uninstalling this module. DKMS: Install Failed (depmod problems). Module rolled back to built state. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic update-initramfs: Generating /boot/initrd.img-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.2.0-26-generic Found initrd image: /boot/initrd.img-3.2.0-26-generic Found linux image: /boot/vmlinuz-3.2.0-25-generic Found initrd image: /boot/initrd.img-3.2.0-25-generic Found linux image: /boot/vmlinuz-3.2.0-24-generic Found initrd image: /boot/initrd.img-3.2.0-24-generic Found linux image: /boot/vmlinuz-3.2.0-23-generic Found initrd image: /boot/initrd.img-3.2.0-23-generic Found linux image: /boot/vmlinuz-3.0.0-17-generic Found initrd image: /boot/initrd.img-3.0.0-17-generic Found memtest86+ image: /boot/memtest86+.bin I went to "additional drivers" and saw some updates available there, but an attempt to install them failed, leaving the following in /var/log/jockey.log (long log, pasted here). The full log won't fit in the question, so I'm showing $ fgrep 'ERROR' /var/log/jockey.log 2012-06-30 17:29:57,897 WARNING: modinfo for module vmxnet failed: ERROR: modinfo: could not find module vmxnet 2012-06-30 17:29:57,937 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2012-06-30 17:29:58,072 WARNING: modinfo for module nvidia_96 failed: ERROR: modinfo: could not find module nvidia_96 2012-06-30 17:29:58,240 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:58,293 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:29:58,351 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:58,385 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:58,420 WARNING: modinfo for module nvidia_96_updates failed: ERROR: modinfo: could not find module nvidia_96_updates 2012-06-30 17:29:58,455 WARNING: modinfo for module ath_pci failed: ERROR: modinfo: could not find module ath_pci 2012-06-30 17:29:58,478 WARNING: modinfo for module fglrx_updates failed: ERROR: modinfo: could not find module fglrx_updates 2012-06-30 17:29:58,531 WARNING: modinfo for module fglrx failed: ERROR: modinfo: could not find module fglrx 2012-06-30 17:29:58,588 WARNING: modinfo for module omapdrm_pvr failed: ERROR: modinfo: could not find module omapdrm_pvr 2012-06-30 17:29:59,537 WARNING: modinfo for module nvidia_current failed: ERROR: modinfo: could not find module nvidia_current 2012-06-30 17:29:59,613 WARNING: modinfo for module nvidia_173_updates failed: ERROR: modinfo: could not find module nvidia_173_updates 2012-06-30 17:29:59,686 WARNING: modinfo for module nvidia_173 failed: ERROR: modinfo: could not find module nvidia_173 2012-06-30 17:29:59,764 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,544 WARNING: modinfo for module nvidia_current_updates failed: ERROR: modinfo: could not find module nvidia_current_updates 2012-06-30 17:30:29,545 ERROR: XorgDriverHandler.enable(): package or module not installed, aborting I'm not sure if it's a bug, as the first log shows some errors. What can I try?

  Read the article

• Solaris 11.1: Encrypted Immutable Zones on (ZFS) Shared Storage

  - by darrenm

  Solaris 11 brought both ZFS encryption and the Immutable Zones feature and I've talked about the combination in the past.  Solaris 11.1 adds a fully supported method of storing zones in their own ZFS using shared storage so lets update things a little and put all three parts together. When using an iSCSI (or other supported shared storage target) for a Zone we can either let the Zones framework setup the ZFS pool or we can do it manually before hand and tell the Zones framework to use the one we made earlier.  To enable encryption we have to take the second path so that we can setup the pool with encryption before we start to install the zones on it. We start by configuring the zone and specifying an rootzpool resource: # zonecfg -z eizoss Use 'create' to begin configuring a new zone. zonecfg:eizoss> create create: Using system default template 'SYSdefault' zonecfg:eizoss> set zonepath=/zones/eizoss zonecfg:eizoss> set file-mac-profile=fixed-configuration zonecfg:eizoss> add rootzpool zonecfg:eizoss:rootzpool> add storage \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 zonecfg:eizoss:rootzpool> end zonecfg:eizoss> verify zonecfg:eizoss> commit zonecfg:eizoss> Now lets create the pool and specify encryption: # suriadm map \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 PROPERTY VALUE mapped-dev /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # echo "zfscrypto" > /zones/p # zpool create -O encryption=on -O keysource=passphrase,file:///zones/p eizoss \ /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # zpool export eizoss Note that the keysource example above is just for this example, realistically you should probably use an Oracle Key Manager or some other better keystorage, but that isn't the purpose of this example.  Note however that it does need to be one of file:// https:// pkcs11: and not prompt for the key location.  Also note that we exported the newly created pool.  The name we used here doesn't actually mater because it will get set properly on import anyway. So lets go ahead and do our install: zoneadm -z eizoss install -x force-zpool-import Configured zone storage resource(s) from: iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 Imported zone zpool: eizoss_rpool Progress being logged to /var/log/zones/zoneadm.20121029T115231Z.eizoss.install Image: Preparing at /zones/eizoss/root. AI Manifest: /tmp/manifest.xml.ujaq54 SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: eizoss Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/solaris/release/ Please review the licenses for the following packages post-install: consolidation/osnet/osnet-incorporation (automatically accepted, not displayed) Package licenses may be viewed using the command: pkg info --license <pkg_fmri> DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 187/187 33575/33575 227.0/227.0 384k/s PHASE ITEMS Installing new actions 47449/47449 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 929.606 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/eizoss/root/var/log/zones/zoneadm.20121029T115231Z.eizoss.install That was really all we had to do, when the install is done boot it up as normal. The zone administrator has no direct access to the ZFS wrapping keys used for the encrypted pool zone is stored on.  Due to how inheritance works in ZFS he can still create new encrypted datasets that use those wrapping keys (without them ever being inside a process in the zone) or he can create encrypted datasets inside the zone that use keys of his own choosing, the output below shows the two cases: rpool is inheriting the key material from the global zone (note we can see the value of the keysource property but we don't use it inside the zone nor does that path need to be (or is) accessible inside the zone). Whereas rpool/export/home/bob has set keysource locally. # zfs get encryption,keysource rpool rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool encryption on inherited from $globalzone rpool keysource passphrase,file:///zones/p inherited from $globalzone rpool/export/home/bob encryption on local rpool/export/home/bob keysource passphrase,prompt local  

  Read the article

< Previous Page | 312 313 314 315 316 317 318 319 320 321 322 323  | Next Page >