Search Results

Search found 10022 results on 401 pages for 'platform games'.

Page 311/401 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

  • Asus M4A79XTD-EVO / AMD Phenom II X4 965 Crashes / BSOD / Hangs / Restarts

    - by Tiby
    I'll try to be as concise as possible because I have a lot to say about my problem, but I'd rather say it when asked or when I feel it's necessary, just to make this initial reading clearer. For about a year and a half I have periods when my system has all the problems in the title (I'll use the word 'crash' for either one). I'll list some patterns and what I tried to do and what were the results, but the list is not exclusive: usually it crashes when a CPU-intensive operation is in progress, like a game or video encoding or HD movie rendering, but also sometimes crashes when I'm doing nothing after a first crash the system is very unstable and sometimes it crashes even during POST, or doesn't boot at all Some months ago I went to a local service (one that you just put your computer on the table and sit there with a guy and trying to figure out the problem, very rare these days) and they used OCCT and it crashed every time he changed some part to test it out (PSU, RAM, video card, HDD). The last one was the CPU. They changed the CPU and it didn't crash any more. Then when they put my CPU back, it also didn't crash. We figured that the trouble was the thermal paste (probably some 2 years old) because it was the only thing changed while testing. Up until 2 weeks ago, I haven't had any more problems. 2 weeks ago the problems reappeared. I changed again the thermal paste, put some Arctic Silver 5, and for about a week everything worked perfect (tried some games, video encoding, no more crashes). But again it started crashing in the same fashion as the first time. But now, instead, I figured out a very odd behaviour: when I start some of the apps above, in most cases it crashes if I start OCCT and turn on the CPU test, and run any of the programs above, it doesn't crash, even if the CPU is on 100% load (and 65-70 degrees Celsius temperature) if I shut down OCCT and continue using the programs, it crashes in a very short period of time (even if the CPU is on 5-10% load and 40 degrees) There are so many patterns and temporary solutions that I figured out in this year and a half period of time, that I can't include them all because I don't know which one are more relevant, but I'll happily provide any details you ask. My system is: CPU: AMD Phenom II X4 965 (3400 MHz - 125W) MB: ASUS M4A79XTD - EVO RAM: Corsair Vengeance 8 GB (2 x 4GB) CL8 1600MHz Video: HIS Radeon HD5770 1GB PSU: Corsair 750W HDD: Western Digital 1TB OS: Win 7 Enterprise 64 BIT (also tried with Windows Server 2008 R2 Trial and Win XP)

    Read the article

  • Is there a Java Package for testing RESTful APIs?

    - by Zachary Spencer
    I'm getting ready to dive into testing of a RESTful service. The majority of our systems are built in Java and Eclipse, so I'm hoping to stay there. I've already found rest-client (http://code.google.com/p/rest-client/) for doing manual and exploratory testing, but is there a stack of java classes that may make my life easier? I'm using testNG for the test platform, but would love helper libraries that can save me time. I've found http4e (http://www.ywebb.com/) but I'd really like something FOSS.

    Read the article

  • Register javascript array from code behind in facebook

    - by Ahmy
    I need to set a javascript array from code behind using C# in Asp.Net2008 the problem now is that when i register the array using the following C# code: string ArrVal = ""; string Sep = ""; for (int i = 0; i < 17; i++) { ArrVal += Sep + FilesCount[i].ToString(); Sep = ","; } Page.ClientScript.RegisterArrayDeclaration("FilesArr", ArrVal); And the Client code is : var FileName = FilesArr[0]; in any web application it is working well but at my application that is released in the facebook platform the javascript code doesn't see the array but in ordinary web application the javscript code see the registered array can any one tell me why this problem occurrs ? Thanks in advance for any reply and trial.

    Read the article

  • UITableView via NSFetchedResultsControllerDelegate, select first record by default?

    - by deafgreatdane
    I have a UITableView that gets populated from CoreData via a controller that implements NSFetchedResultsControllerDelegate. How can I have it automatically select the first row (and fire the tableView:didSelectRowAtIndexPath message)? The tableview is used for a variety of predicate queries, so I'm suspicious of solutions that work on the UIViewController lifecycle (viewDidLoad, etc), but I'm new to the platform, so I'm open. I've tried a variety of things, but I'm not sure where in the call stack to put it. I've tried calling cell.selected = true inside tableView:cellForRowAtIndex: method, but that just ends up turning the cell black (and doesn't fire the selected callback method) A tagent question, with all the delegating and core data protocols, does it imply asynchronous data fetch (multiple threads)? Or is the NSFetchedResultsController calling all its related methods in the same thread? Maybe I'm just scared that if it is async, there would be race conditions that would be tough to troubleshoot later.

    Read the article

  • Android Virtual Device freezing during its loading

    - by maarlin
    Hello, I've downloaded Eclipse Classic 3.5 Galileo, the last version of Android SDK, downloaded and installed Eclipse Android 1.6 platform. I've created first (and the only) AVD with Android 1.6 and the default skin. The log may show more: I've filtered only neccessary messages (warnings, errors). -http://www.clipboard.cz/63c As you can see, my new AVD has started in 16:17 and it was still loading in 17:35... The emulator looks like this: http://img130.imageshack.us/img130/3540/androidloading.png PS: The restrictions about number of links for new accounts are REALLY annoying...

    Read the article

  • Windows Azure Table Storage LINQ Operators

    - by Ryan Elkins
    Currently Table Storage supports From, Where, Take, and First. Are there plans to support any of the other 29 operators? If we have to code for these ourselves, how much of a performance difference are we looking at to something similar via SQL and SQL Server? Do you see it being somewhat comparable or will it be far far slower if I need to do a Count or Sum or Group By over a gigantic dataset? I like the Azure platform and the idea of cloud based storage. I like Windows Azure for the amount of data it can store and the schema-less nature of table storage. SQL Azure just won't work due to the high cost to storage space.

    Read the article

  • Best toolkit for new Web application (odd requirements)

    - by ireadit
    I need to write a new application, and have no experience with any new technology, framework, or language. Here are the requirements: HTML front end (best if it's cross-browser friendly) Web deployable, but also ideally want to be able to install as standalone on a desktop SQL Server database Ideally, would like to use a good (and easy) AJAX toolkit with widgets Ideally, would like to be able to write in ASP.Net but later (or concurrently) also write in Java. This is a big concern, as I would like to not have to rewrite the whole thing. Is there a toolkit I can use that makes this cross-platform requirement easier? All suggestions and comments are much appreciated. Thank you.

    Read the article

  • Creating BlackBerry method stubs using wscompile on WSDL from ColdFusion

    - by Jim B
    I have been working on a BlackBerry application that consumes web services from ColdFusion 7. The Java ME SDK and the Java Wireless Toolkit both require that the generated WSDL be of the document/literal type. Fortunately, I have input on the web service development so I tried setting 'style="document"' in the cfcomponent tag. This generated a document/literal style WSDL but now wscompile generates the following errors in several places: Found unknown simple type: javax.xml.soap.SOAPElement Found unknown simple type: java.util.Calendar Any ideas why this is happening? The WSDL does get parsed correctly by the JWSDP tool but the stubs use namespaces that are not available in the J2ME platform. I would have thought ColdFusion WSDL would work more easily with other products in the Java family.

    Read the article

  • ajax call returns null in my facebook iframe !!!

    - by uhsp
    Hi, I am using jquery to send an ajax request from my facebook app which is in iframe to my server. The ajax request works fine when the web app is running stand alone and out of facebook platform, but within facebook, the result that I get from my ajax request is blank !!! Here is the code I use: $.ajax({ url: 'http://mydomain.com/search', data: params, cache: false, dataType: 'json', success: function(posts) { // post is null !!!!! } error: function(json) { alert('error'); } }); I appreciate if anybody can help me with it. Thanks. uhsp

    Read the article

  • Very slow Eclipse 4.2, how to make it more responsive?

    - by Laurent
    I'm using Eclipse PDT on a rather large PHP project and the IDE is almost unusable. It takes nearly 30 seconds to open a file, and other actions, like selecting a folder in the file explorer, editing some text, etc. are equally slow. I followed various instructions to speed it up but nothing seems to work. This is my current eclipse.ini file. Any idea how I can improve it? -startup plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar --launcher.library plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20120522-1813 -showsplash org.eclipse.platform --launcher.XXMaxPermSize 256m --launcher.defaultAction openFile -vmargs -server -Dosgi.requiredJavaVersion=1.7 -Xmn128m -Xms1024m -Xmx1024m -Xss2m -XX:PermSize=128m -XX:MaxPermSize=128m -XX:+UseParallelGC System: Eclipse 4.2.0, Windows 7, 4 GB RAM

    Read the article

  • Hard freeze on new computer

    - by mphair
    OCZ Gold 3x2GB 240-Pin DDR3 SDRAM PC312800 Palit NE5T240SFHD01 GeForce GT240 1GB 128-bit GDDR5 ASUS P7P55D-E LGA 1156 P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor SAMSUNG 22X Optical drive (DVD+-R/RW) CORSAIR CMPSU-620HX 620W ATX12V V2.2 Windows 7 Ultimate x64 Brand new system (got it from newegg two days ago) and it booted up and installed windows and ran for a day just fine. Yesterday, I boot it up in the afternoon and run various games at full graphics for most of the day. I turn on WoW and play for a few hours and it hard stalls. No numlock switching, no mouse feedback but nothing going wrong on the screen. No BSOD. I wait a bit to see if the stall is just a temporary one, but then force shutdown the computer. Upon reboot, everything seems fine, windows sees that it didn't shut down properly but I go into normal boot and restart WoW. I'm able to load it up and start running around when it freezes again. This time when I restart, it doesn't even get to BIOS. It starts (power goes on) and it just hangs with no output to the monitors. I shut it off and went to bed. This morning, I turned it on and went into BIOS setup. I'm not terribly experienced with messing with BIOS settings but I checked over them the best I could. Everything seems fine so I boot into windows and browse the internet for a bit looking for a solution, hard freeze within 10 minutes. I restart and go into BIOS and check the CPU temperature, 40c. I'm kinda stumped here. Some people say it might be a memory issue, but why would it take so long for it to come up? Could it have been slowly accessing one memory stick at a time and then it just got to a bad one and that's what is causing it to fail? It seems odd that I don't get a BSOD from a hardware failure. Having the screen just halt with no input or output change seems like a software thing to me. Any thoughts?

    Read the article

  • Flash Projectors for MAC and PC

    - by kwek-kwek
    I created a flash projector that would be burn in a CD now my problem is that it doesn't open anything when I click on a link to view a pdf. I have search entire web about creating an apple script, fscommand etc... I am a newbie to flash and more specifically to this burn CD cross platform thing. My PDF are in the same root file as the projectors. i was wondering if you can help me out to what fscommand for both PC & Macto be written in flash and an apple script? Thank you

    Read the article

  • .Net C#: support differnt Office versions

    - by Chris
    We created an application that uses Office 2007 (Excel 2007) to read in data from an Excel worksheet. However. I noticed that when I want to deploy the application on a system with Office 2003 installed, it crashes because other PIA's (and other dll's) need to be referenced for this version of office. Do I need to compile different versions of my application to be able to support different versions of Office or is there a more ellegant solution for this problem? I use Visual Studio 2010 (C#) and the .Net 4.0 platform. Many thanks Chris

    Read the article

  • Creating a "netbeans property" style dialog box

    - by pikco
    Hi I've been trying to create a GUI using netbeans, that includes a dialog similar to Netbean's own "property dialog" that appears when designing. ie. a dialog that contains a table that can be expanded by tree nodes. Something like the dialog on this page, http://platform.netbeans.org/tutorials/nbm-property-editors.html As far as I can understand, the page I linked to describes a custom editor I can set up for use within netbeans while designing - I'm just looking for a way to doing something similar for my actual application I'm writing. Is there an easy way to do this? I came across this and have tried it but it doesn't quite work in the same way as the standard Netbeans dialog. weblogs.java.net/blog/timboudreau/archive/2008/06/egads_an_actual.html Any tips greatly appreciated.

    Read the article

  • How and Where do I learn about how to hook up my uncreated Database to a 3rd party API

    - by raln
    I want to create a database with information that I can send to a third party... they give their api on their website but they don't break it down for new / newbs like myself... I'm confused and was thinking of getting a developer to do this all for me but I DON'T want to get ripped off... and overpay All it is is a webapplication backed by a database onto their platform where they support different API's but I also need a function in my web app that can send various messages via XML, or SMPP to their webservice.. . hmm -Ken

    Read the article

  • Getting past Salesforce trigger governors

    - by Jake
    I'm trying to write an "after update" trigger that does a batch update on all child records of the record that has just been updated. This needs to be able to handle 15k+ child records at a time. Unfortunately, the limit appears to be 100, which is so far below my needs it's not even close to acceptable. I haven't tried splitting the records into batches of 100 each, since this will still put me at a cap of 10k updates per trigger execution. (Maybe I could just daisy-chain triggers together? ugh.) Does anyone know what series of hoops I can jump through to overcome yet another ridiculously short-sighted limitation by this awful development "platform"?

    Read the article

  • Recommendations for supporting both Oracle and SQL Server in the same ASP.NET app with NHibernate

    - by Hugo Zapata
    Our client wants to support both SQL Server and Oracle in the next project. Our experience comes from .NET/SQL Server platform. We will hire an Oracle developer, but our concern is with the DataAccess code. Will NHibernate make the DB Engine transparent for us? I don't think so, but i would like to hear from developers who have faced similar situations. I know this question is a little vague, because i don't have Oracle experience, so i don't know what issues we will find.

    Read the article

  • C# Assembly Xna.Framework.dll does not load

    - by jbsnorro
    When trying to load Microsoft.Xna.Framework.dll from any project, it throws a FileNotFoundException. The specified module could not be found. (Exception from HRESULT: 0x8007007E), with no innerException. Even the simple code like the following throws that exception: static void Main(string[] args) { Assembly.LoadFile(@"C:\Microsoft.Xna.Framework.dll"); } I run XP x64, but I've set the platform in the configuration manager to x86, because I know it shouldn't(doesn't) work on x64 or Any CPU. I've manually added the dll file to GAC, but that didn't solve the problem. I have also tried the M$ Assembly Binding Log Viewer to see if those logs had any useful information, but they didn't. Everything, the loading etc, was a success according to them. Any suggestions? please?

    Read the article

  • List of IP addresses/hostnames from local network in Python

    - by joshhunt
    How can I get a list of the IP addresses or host names from a local network easily in Python? It would be best if it was multi-platform, but it needs to work on Mac OS X first, then others follow. Edit: By local I mean all active addresses within a local network, such as 192.168.xxx.xxx. So, if the IP address of my computer (within the local network) is 192.168.1.1, and I have three other connected computers, I would want it to return the IP addresses 192.168.1.2, 192.168.1.3, 192.168.1.4, and possibly their hostnames.

    Read the article

  • Connecting to TFS from iPhone

    - by Andrei
    Hi. I'm building this iPhone application to connect to a secured TFS server (one that requires authentication before letting you access its web services). When I access this server in a browser, the first thing it will do is ask me for credentials (username/password) and then connect me to the TFS server if those credentials are correct. I am using web services, as I don't think there is any other way to use TFS functionality for an outside platform...without changing stuff on the TFS host machine. So my questions are: Are there any web services that can be accessed to log into the TFS server? This authentication mechanism seems to be something common among multiple websites (I have seen it in other websites). Is there a way to replicate that authentication mechanism by sending an HTTP request? Is there a way to replicate this authentication procedure in any way? Thanks!

    Read the article

  • How can one make a web-site accessible only when someone has a dongle?

    - by Brian M. Hunt
    Suppose you want to add an extra layer of credentials on top of a SSL-encrypted login/password, but you don't want to increase complexity to the user. Is there a way to add the requirement of the possession of a dongle to web-server authentication schemes with existing cross-platform browser capabilities? In other words, to get access to the web-site, you would need a username, password, and a USB dongle that has been plugged into the client computer. The dongle would presumably do some sort of challenge/response. It'd be ideal if this dongle solution worked with Firefox automatically or with the simple addition of a plugin. Thoughts and suggestions are appreciated.

    Read the article

  • How can I pipe a large amount of data as a runtime argument?

    - by Zombies
    Running an executable JAR on a linux platform here. The program it self works on a somewhat large amount of data, basically a list of URLs... could be up to 2k. Currently I get this from a simple DB call. But I was thinking that instead of creating a new mode and writing SQL to get a new result set and having to redploy everytime, I could just make the program more robust by passing in the result set (the list of URLs) that need to be worked on... so, within a linux environment, is there a pain-free/simple way to get the result set and pass it in dynamically? I know file i/o is one, but it doesn't seem to be effecient because each file has to be named, as well more logic to handle grabbing the correct file, creating a file with a unique name, etc.

    Read the article

  • Is there a .def file equivalent on Linux for controlling exported function names in a shared library

    - by morpheous
    I am building a shared library on Ubuntu 9.10. I want to export only a subset of my functions from the library. On the Windows platform, this would be done using a module definition (.def) file which would contain a list of the external and internal names of the functions exported from the library. I have the following questions: How can I restrict the exported functions of a shared library to those I want (i.e. a .def file equivalent) Using .def files as an example, you can give a function an external name that is different from its internal name (useful for prevent name collisions and also redecorating mangled names etc) On windows I can use the EXPORT command (IIRC) to check the list of exported functions and addresses, what is the equivalent way to do this on Linux?

    Read the article

  • The next step & technology towards web services.

    - by webzide
    Hi, My name is Dennis and I am pretty ambitious of creating the next big thing for the web. I have ideas but now I gotta get to work to learn the tools. I am learning Javascript. I don't know if next step for me to take is PHP or some suggests RUBY on Rails. What are the pros and cons. With your experience, I wish you could hint me to the right direction. Thanks. I don't mind working hard. My goal is to create a comprehensive and secure web service platform as well as a fast and user friendly UI.

    Read the article

  • How can I do a partial update (i.e., get isolated changesets) from subversion with subclipse?

    - by Ingvald
    If a file is committed several times with various changes, how can I fetch one change at a time, i.e., one changeset at a time? I use eclipse, subversion, and subclipse, and I can't change the former two for the time being (or the MS platform..). In my list/ overview a file seems to be listed only in the latest relevant changeset even if all changesets are listed. So an earlier changeset doesn't necessarily show the full set of files in the original commit, nor the original diff for a file in a commit. Update: I'm thinking about using changesets for simplified peer review, so I'd like the partial update represented for all the files commited in one changeset. It's easy to get diffs and specific revisions for specific files in eclipse, but I'd like to step through all the changes in one specific commit/ changeset in a practical manner.

    Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >