Search Results

Search found 24890 results on 996 pages for 'iphone device'.

Page 312/996 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Cliq Wireless questions

  - by Nathan Adams

  Heres the deal: I am by no means a Linux expert, even less when it comes to the Android OS but lets see if we can't solve this problem. The problem I am having is that on the Cliq we have a broadcom chip. In order to use the wireless card you must first insert the module into the kernel. Fine: # insmod /system/lib/dhd.ko insmod /system/lib/dhd.ko # lsmod lsmod dhd 164936 0 - Live 0xbf000000 # BUT netcfg (or ifconfig in busybox) does not recognize that there is a wireless adapter there: # netcfg netcfg lo UP 127.0.0.1 255.0.0.0 0x00000049 dummy0 DOWN 0.0.0.0 0.0.0.0 0x00000082 rmnet0 UP 14.67.164.2 255.255.255.252 0x00001043 rmnet1 DOWN 0.0.0.0 0.0.0.0 0x00001002 rmnet2 DOWN 0.0.0.0 0.0.0.0 0x00001002 usb0 DOWN 0.0.0.0 0.0.0.0 0x00001002 # busybox ifconfig busybox ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:282 errors:0 dropped:0 overruns:0 frame:0 TX packets:282 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:18754 (18.3 KiB) TX bytes:18754 (18.3 KiB) rmnet0 Link encap:Ethernet HWaddr EE:83:E8:B4:4A:ED inet addr:14.x.x.x Bcast:14.67.164.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7148 errors:0 dropped:0 overruns:0 frame:0 TX packets:7659 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2609236 (2.4 MiB) TX bytes:908575 (887.2 KiB) # For giggles if we attempt to launch wpa_supplicant anyways we get this: # wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf wpa_supplicant -Dwext -ieth0 -c/data/misc/wifi/wpa_supplicant.conf ioctl[SIOCSIWPMKSA]: No such device ioctl[SIOCSIWMODE]: No such device Could not configure driver to use managed mode ioctl[SIOCGIFFLAGS]: No such device Could not set interface 'eth0' UP ioctl[SIOCGIWRANGE]: No such device ioctl[SIOCGIFINDEX]: No such device CTRL-EVENT-STATE-CHANGE id=-1 state=0 ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWENCODEEXT]: No such device ioctl[SIOCSIWENCODE]: No such device ioctl[SIOCSIWAUTH]: No such device WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: No such device WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: No such device WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: No such device ioctl[SIOCGIFFLAGS]: No such device # In dmesg we get: <4>[18300.494065] dhd_oob_enable_intr : enable <4>[18305.019976] dhd_net_start failed bus is not ready <4>[18305.020278] dhdsdio_probe: dhd_net_start failed! Do I need to specify the firmware with insmod? Why are we trying to control the interface manually instead of through the Android API? The Android API doesn't support ad-hoc connections as far as I can tell. The card, I am sure, most certainly can.

  Read the article

• No audio from USB device on iMac

  - by brandon

  My computer froze the other day and started a buzzing noise. After I restarted in the middle of it, the buzzing persisted. A few restarts later, the buzzing stopped, but I can't get audio to come from my audio interface setup anymore. I'm using an M-Audiophile USB to connect to studio monitors, and there's absolutely no audio. I've tried restarting many times and unplugging - still nothing. Any help would be appreciated.

  Read the article

• WLAN device on Dell Inspiron not detected by Fedora 11

  - by Randell

  I recently installed Fedora 11 on a Dell Inspiron 14. I think it uses a Dell 802.11b/g Wireless LAN. Windows Vista can detect it but Fedora 11 can't. How can I fix this?

  Read the article

• Error adding 4tb LUN (Raw Device Mapping) to ESX4 VM

  - by Tom Gardiner

  Hi guys, I'm trying to map an existing 4tb LUN from a Fibre Channel SAN, through to a VM in my ESX4 environment. It keeps telling me that the VMDK file size exceeds the the maximum size supported by the datastore. I've tried in Physical compatibility mode, and also both Virtual styles. I'm a little confused by this as we had the same LUN mapped through to another VM when we were running ESX3.5... I've also noticed that some of my other RAW mappings are generating extremely large VMDK files on the ESX servers. Does anyone know if this change in behaviour is intentional? And if so why? It doesn't seem to me that if the LUN is mapped directly to the VM that it's size should be relevant. We're running 4.0.0 build 236512, and 4.0.0 build 219382 and I've not had any success on either. Any insight or advice would be much appreciated! TG

  Read the article

• Handheld Linux device can't see one wireless network

  - by Nathan

  I'm using a Nokia N810 running OS 2008 (version 5.2008.43-7; should be the latest). It can see networks up and down the street in my neighborhood and can connect to mine using WEP. I can also connect to free networks at restaurants and the like. When I bring it into work, it can't see a wireless network ("No connections available"). When I use netstumbler on my laptop I can see a list of several essids showing green connectivity for the network. I know that the network has its essid broadcast, and I know that it's unsecured. When I run iwlist wlan0 scan, I see several APs with no essid, but I don't see anything with an essid set. I have verified using iwlist that my hardware supports the correct channels and speeds. I know this isn't a Nokia/mobile forum, but it's running what's basically a Debian kernel. Any suggestions on what to do in this case? I'm really frustrated by this. Thanks, Nathan

  Read the article

• an unknown ip on network

  - by Ahmed safan

  In our office we have many PCs, all of them have static IP addresses. We had a problem with one server with ip 192.168.1.10 dropping off the network occasionally. I unplugged the network cable from the server and from pinged 192.168.1.10 from another host and there was a response. I searched all PCs to see if any has such ip but i didn't found a one. I changed the server ip to fix the problem, but I still find this rogue device using 192.168.1.10 on the network -- how can I figure out what it is? Could it be the ip of virtual machine on someone's PC?

  Read the article

• Process for configuring network settings on a headless rack mount device

  - by PherricOxide

  I'm with a small company that plans to sell a rack mounted network appliance which is configurable via a web interface (think of a router configuration page sort of deal), and I'm wondering in large data center like environments what the process usually is for the initial setup of such systems. The main question is, if the system is headless, how do you get initial remote access to it? Do companies usually first plug a server into a monitor/keyboard/mouse in order to configure the network settings before mounting it in a rack? How else would they know what the IP address of the machine was if DHCP (and it can't be hard coded because of IP conflict potential)?

  Read the article

• Mobile Device Manager 2008 SP1 With WSUS 3.1 SP2

  - by dneomatrix

  Can I install MDM 2008 SP1 with WSUS 3.1 SP2? It fails telling me I need WSUS 3.0 SP1 or higher.. but since I have SP2 shouldn't it work? I'm installing on Server 2008

  Read the article

• Blackberry device GPS hardware specs [closed]

  - by colemanm

  I'm looking to find out detailed specifications for the built-in GPS hardware in the Blackberry Bold and Curve devices (9000 and 8350). RIM's documentation includes just a rudimentary description of the specs, but I'm looking for things like the actual detailed hardware/chipset info so we can research the accuracy needs for some upcoming projects we have. Knowing simply "A-GPS support" isn't really good enough... Does anyone know of any resources for finding advanced specs for built-in Blackberry hardware?

  Read the article

• OpenGL - What softwares are needed to learn Open GL on Osx

  - by sugar

  I strongly believe that - my question isn't related to programing, so that I asked my question here ( super user ). Here, I am not asking what links should I follow to learn OpenGL. I am asking that - What software are needed for learning Open Gl? Let me explain more briefly, I want to learn openGL for iPhone game development. Tools for creating 3D objects which are preferable tools are targeted for osx would be preferable. In short I would like to know, The list of application which are used by iPhone professional game developers on osx. Thanks in advance for sharing your knowledge. Please add comment before down voting. Sagar.

  Read the article

• 403 forbidden while submitting a POST request with image data via iPhone application

  - by binnyb

  I am creating an iOS application which allows users to send image/text data to my webserver via a POST request. I am successfully sending POSTS to the server when image data is not included in the request. Any time i POST with image data the server spits back a 403 forbidden. I have tried adding the following to the .htaccess file in the directory of the script with no luck: Options +Indexes FollowSymLinks +ExecCGI Order allow,deny Allow from all web browsers and Android devices can successfully POST with image data to the script, the only device which cannot is the iPhone. POSTING with data to other hosting providers works as expected - it is just this host(ipowerweb.com). i noticed that when i try to POST to ANY script on the server with data returns a 403 forbidden. another note: i can successfully post to another server that is hosted by ipowerweb, but mine cant seem to handle it. My host has tried to resolve the issue but cannot, and they have marked it on their end as "resolved", so no more help from them. I wish to keep this host as moving would be a pain - i will change hosts as a last resort, so please help me! Why am i getting this 403 forbidden error only when i submit data via my iPhone application? How can i resolve the issue so i can successfully POST data? any advice on what i can do would be greatly appreciated. edit: as request, here are the response headers: { Connection = close; "Content-Length" = 217; "Content-Type" = "text/html; charset=iso-8859-1"; Date = "Wed, 12 Jan 2011 19:11:19 GMT"; Server = "Apache/2"; } edit: as request here are the request headers(oops): { "Accept-Encoding" = gzip; "Content-Length" = 5781; "Content-Type" = "multipart/form-data; charset=utf-8; boundary=0xKhTmLbOuNdArY"; "User-Agent" = "YeahIAteThat 1.0 (iPhone; iPhone OS 4.2.1; en_US)"; }

  Read the article

• Slow File Copy observed copying 40GB files across network to iSCSI device

  - by Rick

  Here's a curious ones for the gurus: Setup: Source Machine: Windows Server 2003 R2 machine with local hard drive. VHD file of 40GB. 1 x 1Gbps network card, Cat6 cable, switch. Target Machine: Windows Server 2008 R2 machine with iSCSI connection to iSCSI target on separate machine (1TB, RAID5). 1 x 1Gbps network card, Cat6 cable, connected to same switch as for Source Machine. Second 1Gbps network card, Cat6 cable, connected via isolated switch to the iSCSI target. Switches are Netgear JGS524 model (web managed). If I copy from the Win2003R2 machine to Win2008R2 machine local drive I get 40GB in 45 minutes, 36 seconds. If I copy from the Win2008R2 machine to the iSCSI target (local drive to iSCSI target) I get 40GB in 37 minutes 56 seconds. If I copy from the Win2003R2 machine to the iSCSI target via the Win2008R2 machine I get 40GB in 3 hours, 50 minutes, 24 seconds. All copies were done via the following command issued on the Win2008R2 box: XCOPY <source> <target> /J XCOPY /J - Copies using unbuffered I/O. Recommended for very large files. So, what's the bit I'm missing here? Why does a back-to-back copy take in total 1 hour, 23 minutes, 32 seconds when a "straight through" copy take almost 3 times as long? Switches show no errors, network hovers around the 3% utilisation mark for the duration of the copy (whereas the "back-to-back" copies are around the 25% utilisation mark). What have I missed?

  Read the article

• IEEE 1394 Firewire Card is not visible in Device Manager in WIndows 7

  - by Shyam

  I have a IEEE 1394 card that I have placed in one of the PCI slots of my Windows 7 PC. I have moved to Windows just last week and Windows is not detecting this card. It is not listed in the Devide Manager. Earlier when I used Fedora 12, I was able to use this interface for capturing videos from my DV Camera. The manufacturer is Tech-Com, which has not provided a driver CD for this. What can I possibly try?

  Read the article

• Selective Pointer device remapping in linux

  - by user6368

  I just got an HP 2710p (hp tablet, with digitizer), and I've played around with linux for a while now, and thought I would go ahead and install it. Everything works fine, excepting normal tablet functions, which is to be expected. I'm working on the screen rotation, and there are on-screen keyboards, etc, but I'm having issues with the stylus. I can tap and left click with the stylus as normal, but the side button (which in windows functions as a right mouse button) appears as a 'button 2' to xev (a middle/scroll wheel button). I can switch 'button 2' and 'button 3' universally using xmodmap, but I'd like to do so exclusively for stylus so I don't screw up regular pointing devices. Altering xorg.conf (which is surprisingly bare) with the recommended sections (adding sections for each of the stylus buttons) does nothing. I'm running crunchbang, which is an ubuntu/debian varient with openbox as the windows manager. Thanks Also, as a seperate note, does anybody know how to detect when I rotate and/or latch the lid shut? I was thinking maybe I could run a script to switch the buttons when I close it, but I can't find any information.

  Read the article

• New MacBook pro 15" with core i5

  - by meetS

  Are there any problems with using a new macbook pro 15" core i5 for iPhone development?

  Read the article

• Stream video from one app to another in OS X (Software video input device)

  - by Josh

  Is there any way to take a video stream from one application, for example VLC Media Player, and present that video stream to other applications as a video input source? For example, could I broadcast a video file from my hard disk to a website that allows video conferencing using a Flash applet? Basically, I'm looking for something like Soundflower, but for video streams. Is this possible?

  Read the article

• record phone conversation on a WM device

  - by doug

  Hi there does anyone know a good windows mobile software application which will allow me to record the phone discussion (what I say and what the other person says) Also I'll be interested to know which windows mobile application will allow me to use the phone as a audio recorder (reportophon).

  Read the article

• Successful login with iscsiadm on target still doesn't create block device

  - by Halfgaar

  I've set up an experiment to test iscsitarget and initiator, which at some point worked. Later, I turned the setup back on and much to my dismay, the initiator machine stopped making block devices for its successful logins. As far as I know, I haven't changed anything on either machine. Some details: # iscsiadm -m node --login Logging in to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun1, portal: 10.0.0.1,3260] Logging in to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun2, portal: 10.0.0.1,3260] Login to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun1, portal: 10.0.0.1,3260]: successful Login to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun2, portal: 10.0.0.1,3260]: successful Sessions: # iscsiadm -m session tcp: [3] 10.0.0.1:3260,1 iqn.2010-12.nl.ytec.arbiter:arbiter.lun1 tcp: [4] 10.0.0.1:3260,1 iqn.2010-12.nl.ytec.arbiter:arbiter.lun2 Netstat: # netstat -n -p|grep 3260 tcp 0 0 10.0.0.2:48719 10.0.0.1:3260 ESTABLISHED 1078/iscsid tcp 0 0 10.0.0.2:48718 10.0.0.1:3260 ESTABLISHED 1078/iscsid /var/log/syslog doesn't give errors: Jan 27 11:41:49 vmnode001 kernel: [ 378.041749] scsi7 : iSCSI Initiator over TCP/IP Jan 27 11:41:49 vmnode001 kernel: [ 378.044180] scsi8 : iSCSI Initiator over TCP/IP lsscsi doesn't show my devices: [0:0:1:0] cd/dvd TSSTcorp DVD-ROM TS-L333A D100 /dev/sr0 [4:0:0:0] disk ATA Hitachi HUA72105 A74A - [4:0:1:0] disk ATA Hitachi HUA72105 A74A - [4:1:0:0] disk Dell VIRTUAL DISK 1028 /dev/sda And there are no block devices in /dev for it: # ls -1 /dev/sd* /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4 I tried loading all scsi kernel modules I could find, but that doesn't seem to be the problem. I reall don't get this; it used to work. I found people with similar problems (here and here) but no solution. Initiator is Debian Sqeeuze (testing), target is Debian Lenny (stable). iscsitarget is 0.4.16+svn162-3.1+lenny1, open-iscsi (initiator) is 2.0.871.3-2squeeze1. Target kernel: 2.6.26-2-amd64, initiator kernel: 2.6.32-5-amd64

  Read the article

• how to copy locked files ( Device or resource busy error) on windows xp without admin permissions

  - by Hemant

  Is there is any way I can copy locked files on windows xp machine without having admin rights? I used unloker tool its great but needs admin rights to install and run. how it could be done in some programming language like perl/shell/c c++ etc. or if there exists some workaround for this.

  Read the article

• Can using higher rated battery damage device?

  - by Anwar Shah

  I am in need of a battery for my Lenovo 3000 Y410 Laptop. It's installed battery has voltage rating of 10.8v. But the shop i've consulted has only a battery of 11.1v rating. Should I buy the battery? I mean, Does using that battery can damage my laptop? An answer with some good source from hardware vendor will be very much helpful. Please do not just put your opinion. Because I do not see any difference in your opinion and my opinion. My opinion is also "It is bad". But I need some reliable source.

  Read the article

• View hidden contents of usb device

  - by Srikanth Suresh

  I have a USB with the following contents on ls -lah total 8.0K drwx------ 1 srikanth srikanth 4.0K May 27 22:54 . drwxr-xr-x 4 root root 4.0K May 28 19:37 .. -rw------- 2 srikanth srikanth 0 May 27 22:52 Files.az3w On viewing the properties of the folder I have the following information: 90.4Mb used and 16.1GB free There is data in this pen drive which I am currently unable to view also it is sensitive. After searching about hiding contents in a USB I think that there is a hidden partition here that I cant access. How should I proceed to view the contents without damaging the files already present?

  Read the article

• HALEVT troubleshooting: VFAT usb storage device gets mounted with root:root user:group

  - by Nova deViator

  Hi, i'm banging my head for number of days around this problem. using Halevt for automounting, everything mostly works, but the only thing is that Halevt mounts external USB storage devices as root. So, as user i cannot write to files on them. Halevt gets run as halevt user on boot through /etc/init.d script. This is Ubuntu Lucid with Awesome WM. No GDM. Running halevt as user seem to not work (halevt runs but doesn't respond on Insert) I know HAL is deprecated and removed and i should probably write my own UDEV rules, but until then it seems there must a be simple hack that enables mounting VFAT/NTFS devices with specific uid/gid. this question/answer helps a lot, but not specifically to the above.

  Read the article

• Graphics Tablet as input device for Windows 8

  - by Arcath

  Having used Windows 8 (and 8.1) on a touch screen I know how much better it is than with a mouse. I've seen people with graphics tables on 7 use them to scroll their browser etc... so I was wondering if I could use one as a touch screen for windows? and if did would the 8 features of swipe in from the sides etc... work properly? Just incase brand is an issue in this I was looking at getting a Wacom.

  Read the article

• losetup does not decrypt device in Ubuntu 11.4 as before

  - by Kay

  I had an external volume mounted using losetup for about two years. It was created using Ubuntu 9.4 and I used the same Ubuntu installation throughout all dist upgrades. Now as I bought a new laptop I set up a fresh Ubuntu 11.4 installation on it. Problem is: losetup -e twofish /dev/loop0 /dev/sdb2 does not decrypt the volume anymore. The data in /dev/loop0 contains apparently random data. I am sure I entered the correct password. I modprobe'd cryptoloop and twofish. My question is: Has Canonical done some obscure changes to losetup like adding a salt? Does losetup depend on configuration files I did not know about? How can I decrypt the volume on my now laptop?

  Read the article

• Create XFS volume on /dev/sg* device

  - by cpt.Buggy

  Now I have couple of Supermicro 24x2Tb SATA servers and I have now idea how to get access to disks. I need to create XFS volume on each of them but really don't know how to do it, because fdisk doesn't see them. # sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi1 channel=0 id=0 lun=0 [em] ATA ST3250318AS CC38 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi6 channel=1 id=8 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] ... ... ... /dev/sg25: scsi6 channel=1 id=31 lun=0 [em] Hitachi HDS722020ALA330 JKAO [rmb=0 cmdq=1 pqual=1 pdev=0x0] /dev/sg26: scsi6 channel=3 id=0 lun=0 [em] LSILOGIC SASX36 A.1 7017 [rmb=0 cmdq=1 pqual=0 pdev=0xd] # sg_map /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 .. ... ... /dev/sg25 /dev/sg26 I can't use fdisk and mkfs, what should I do?

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >