Search Results

Search found 10519 results on 421 pages for 'standard'.

Page 312/421 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• USB drive was bootable, but no longer boots

  - by i-g

  I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

  Read the article

• Can't start Windows 7 after cloning HDD

  - by Paul

  Brief description: cloned HDD1 - HDD2 HDD1 partition 1 boots HDD1 partition 2 boots HDD2 partition 1 boots HDD2 partition 2 doesn't boot Windows, but is bootable in general Now verbosely: In all the cases computer is the same. I have two Windows 7 installations on HDD1 - both are booting fine. I choose between them using standard Windows 7 boot loader menu. Technically there are 4 partitions: 100 MB Boot loader partition (active), Windows 7 copy 1 (25 GB), Windows 7 copy 2 (150 GB) and Working partition. All are primary. In past few days I tried to clone the whole HDD1 to HDD2 of the same size (but 2,5 inch form factor) as is using Minitool Partition wizard. Everything has been copied, all files are accessible, no faults in file system structure, even boot loader wasn't damaged and I hadn't to repair it. But I can boot only first installation of Windows 7 (it boots without issues). When I choose the second installation, I get immediately a completely black screen without any texts, cursors and other data. HDD isn't accessed after that. This black screen is sensitive to Ctrl-Alt-Delete which causes computer reboot. I did some experimenting: Installed Windows 7 to that partition - it booted fine. Then I renamed "Windows" to "Windows.old" and copied Windows directory from HDD1 as it was, using Far Manager, and got the same troubles - black screen. (Of course I performed renaming and copying from other copy of Windows). So, it seems that problems are inside this installation of Windows, somewhere in its files.

  Read the article

• Xen domU mem-set issue

  - by Casper Langemeijer

  I'm running into a problem on my xen 4.0.1 server (debian squeeze) My host has 32G of memory, Domain-0 has 2048 M assigned to it. (scaled down with xm mem-set Domain-0 2048) top in Domain-0 confirms this. I created a virtual machine config file (using xen-tools) with the following options: memory = '512' maxmem = '2048' Both host and guest machines are running the standard 2.6.32-5-xen-amd64 debian kernel. 'xm create' creates a virtual machine with 512MB of memory as expected. Then 'xm mem-set domU 1024' will not expand the memory to 1024MB running 'xm mem-set domU 400' does set the memory to about 400MB Then 'xm mem-set domU 1024' will expands the memory back to 512MB Based on this, you would say that xm ignores the maxmem and silently sets maxmem to 512, but in the output of xm top the MAXMEM column reads 2G. the MEM column will not go over 512M. The output of xm list tells another story, it shows 1024 when I 'xm mem-set domU 1024'. I've googled myself all away around the internet for this issue and found that most people don't scale back Domain-0. I know I've seen a bugreport about the issue I'm experiencing, but can't find it anymore. Does anyone see what I'm doing wrong here? Hmm.. I just upgraded my kernel to the one provided by debian backports. The issue has gone.

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• Developer hardware autonomy in a managed desktop environment [closed]

  - by Troy Hunt

  I’m looking for some feedback on how developer PCs are managed within environments that have a strict managed desktop policy (normally large corporations). For example, many corporate environments control the installation of software and the deployment of patches and virus updates through a centralised channel. This usually means also dictating the OS version and architecture (32 bit versus 64 bit) which will likely also mean standardised hardware configurations. I’m particularly interested in feedback from developers who work in this sort of environment but have a high degree of autonomy over their machines. This might mean choosing your own hardware vendor, OS type and version and perhaps how the machines are built and maintained. I have several specific questions: How do you satisfy the needs of security, governance etc whilst maintaining your autonomy? For example, how do you address concerns about keeping virus definitions and OS patches up to date? Do you have a process for gaining exemption from standard desktop builds and if so, what do you need to demonstrate in order to get this? How have you justified this need to the decision makers? Essentially, what is the benefit to your role as a developer by having this degree of autonomy? Thanks very much everyone. Update: There's a great post from Jean-Paul Boodhoo which addresses the developer tool component of the quesiton here: http://blog.jpboodhoo.com/TheFallacyOfTheStandardizedDeveloperMachineimage.aspx

  Read the article

• email attachments [closed]

  - by Alan Doolan

  My company currently use software on a local machine that will take an email from the email server, extract the attachment, rename it and then add it to a folder on a webserver using ftp. This works well but they are currently asking if it can be done 'in the cloud' or what they really mean, not local. Is there any thing that would do this on the server itself? I should clarify a bit. The attachements are various reports that are being sent to different email addresses (mostly google corporate and free accounts). We need the reports to be on a folder on a webserver so that internal pages can take the information in the reports (csv) and use it on the webpages or adds them to a separate database. The key part being that the files need to be in the particular folders. Though it does work to have a computer running software that will take the files, renames them to the required name and uploads them to the folder it relies too heavily on one computer working all the time. This is not something we can depend on at this point. I'll be honest, I'm a web developer and not strong with server systems past my particular standard requirements so this is beyond me. though yes, I am aware that my boss is not 100% sure what 'cloud' means but likes the word.

  Read the article

• rdp allow client reconnect without password prompt after several hours

  - by Tom

  Let me describe the setup first: client PC with several rdp sessions to local servers, all opened from saved rdp sessions with stored passwords, using the standard windows rdp client. several windows servers on the LAN, with varying server OS: windows server 2003, 2008, and even 2012 now. When I log onto my PC I open up rdp sessions to all those servers, and keep them open all the time for various reasons. Overnight the client PC is put into sleep or hibernate mode, thereby braking the rdp connections. On the next day when I wake the client PC and login again, the rdp sessions automatically try to reconnect to the servers, and this leads to the question: starting with server 2008 something apparently changed in the rdp server config, as all servers with 2008, 2008r2 and 2012 will prompt for the password in the rdp session, whereas the 2003 server rdp connections will re-establish without the password prompt. Apparently there is a timeout setting on 2008+ that, when exceeded, requires a reauthentication. Is there any way to setup the 2008+ servers to behave like 2003 did? I'd like the rdp sessions to reconnect without a password prompt even after a several hour disconnect.

  Read the article

• Losing SQL connections

  - by john pavelka

  sql servr 2005 - Standard; one dedicated sql server (VM); windows server 2003; Small databases; About once a week we lose all sql connections. It seems to fix itself after about 5-10 minutes. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. We don't have a fully qualified DBA; it's kind of a joint effort here. Can somebody give me some general ideas for troubleshooting the network side and the application side? We already ran a few tuning profiles and ran through Database Tuning Advisor to apply indexing recommendations. It would sure be nice if there was a way to take a snapshot of what was running on sql server when these 100% cpu spikes occured, but sometimes we're not around. Is it common to throttle CPU for certain processes? Can this be done with Windows server 2003? For example, if security apps were making cpu spike to 100%, is there a way to limit their cpu usage? Any advice is appreciated. thanks,

  Read the article

• How to kill ostensibly immortal process?

  - by DeeDee

  I had some huge file transfers operating on an NFS mount. The server on which the mount point resided was carelessly rebooted, and now the server from which these large transfers were initiated seems to be bogged down by them. If I run top, I see the following: The first thing I tried was to run kill with each the -1 -2 -9 and -15 flags, and each of the process ids shown above in turn. This allowed me to proceed, but didn't kill the processes. The next thing I attempted was to reboot the server, but neither reboot nor shutdown -r now worked. When I ran shutdown -r now the standard broadcast message was sent out, but the sever did not reboot. I confirmed this by looking at the server uptime, which was 25 days. So now I'm a little stuck. I'm running these commands as root. EDIT: Here's another interesting tidbit: In top, I don't see that any other processes are using more than a fraction of a percent of memory or more than 5% of CPU. EDIT 2: output of /var/log/messages

  Read the article

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Monitoring instantaneous network throughput at one second intervals?

  - by Shaddi

  For a testing setup I have, I need to monitor the throughput through a "router"* at regular intervals of around 5 seconds or less (sub-second intervals would be very nice, but not required). Ideally, I would be able to generate a file which contained both the number of bytes and packets seen during each interval. I will eventually be generating a time-series of throughput from this data. On a previous setup using an older version of FreeBSD, there was a tool called "bpfmon" which gave me this information. However, I need to do this under a modern version of Linux (namely, Ubuntu 11.04). I have looked at both iptraf and iftop, but these do not appear to provide the resolution I need, nor do they seem to easily allow scraping the data I need. I understand iptables statistics may be able to give me what I'm after, but the examples I've seen of this seem to rely on repeatedly reading and resetting traffic counters, which seems like it could give inaccurate as read/reset is not an atomic operation. I already capture a tcpdump trace of the traffic I'm interested in on the link I want to monitor, so I am open to approaches which simply parse that. I feel like this must be a common problem though, so I am hoping there will be a standard "best practice" tool for accomplishing this. *I say "router" in quotes because I am really talking about a machine with two bridged NICs through which all the traffic I'm interested in passes.

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• ubuntu's average load never below "0.00 0.01 0.05"

  - by Karma Fusebox

  I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

  Read the article

• Can I restore one of my user's profiles in Vista?

  - by Rod

  My youngest daughter uses my 4 year old laptop, which has Windows Vista installed. Somehow she got some Trojan (Vista Internet Security). (I'd love to know how that happened, seeing as how she is a standard user, and I have VIPRE as my AV.) Anyway, I ran a deep anti-virus scan using VIPRE, which identified it. I decided to delete everything that it identified. Now she cannot use anything in her profile. If she tries to bring up the browser, it recycles over and over again a dialog box asking which program to use. If I try to run any program at all, it doesn't know what to do. For example, it is totally lost trying to run the command line. If I bring up Windows Explorer and navigate to Windows\System32 and try to run the command line, or anything at all from there, it goes "Huh?" What in heck has happened?? Is it possible to fix this, and if so, how? As an aside, I can log into my account (my account on that machine is an administrator) and it works fine.

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• Changing time intervals for vSphere performance monitoring, and is there a better way?

  - by user991710

  I have a set of experiments running on a cluster node which is running ESXi 5.1, and I want to monitor the resource consumption on the node itself. Specifically, I am currently running experiments on a subset of the VMs on the ESXi host and wish to monitor resource consumption on those specific VMs. Right now, since I'm using only a single ESXi host, I am using vSphere to access it and the performance reports. Ideally, I would like to get these reports for different time intervals. I can already get the charts for a time interval of 1h, but these are rather long-running experiments and something like 2h, 3h,... would be preferable. However, I cannot seem to change the time interval. Here is an example of what my Customize Performance Chart dialog shows: I am also running on a trial key at the moment. How can I change this interval? Do I need a standard license, or do I just need to turn off the VM (unlikely, but I haven't attempted it yet as these are long-running experiments)? Any help (or pointers to documentation which deals with the above -- I've already looked but did not find much) would be greatly appreciated.

  Read the article

• DNS manager in Windows Server 2012 Essentials - My one server appears twice

  - by tetranz

  I have a newly installed Windows Server 2012 Essentials. It works pretty good although I'm working on some DNS improvements. Something that seems a little weird is in DNS Manager, my server appears twice. Once as hostname and once as hostname.mydomain.local. They seem to be identical and locked in sync. If I change one, the other follows. Is this normal? Does anyone know why I have this? I'm talking about the top level on the navigation. The very top is DNS and then these two below. Zones, forwarders etc are below them. I've found a couple of forum posts of people asking the same thing but no useful answer. All tutorials etc I can find with screenshots show only one which makes me uncomfortable. The server was installed out of the box as standard with the wizards. I know about the recommendation not to use .local but the wizards didn't give me any other option.

  Read the article

• VMWare vSphere 5: 4 pNICs for iSCSI vs. 2 pNICs

  - by gravyface

  New SAN for me, never used before: it's an IBM DS3512, dual controller with a quad 1GbE NIC per controller that a client bought and needs help setting up. Hosts (x2) have 8 pNICs and while I usually reserve 2 pNICs for iSCSI per host (and 2 for VM, 2 for management, 2 for vMotion, staggered across adapters), these extra ports on the SAN have me wondering if storage I/O would be significantly improved with 2 additional NICs per host, or if the limitations of the vmkernel/initiator would prevent the additional multipaths from ever being realized. I'm not seeing alot of 4 pNIC iSCSI implementations per host; 2 is the de facto standard from what I've read/seen online. I could and probably will do some I/O testing, but just wondering if there's a "wall" that someone else has discovered long ago (i.e. before 10GbE) that makes a 4 NIC iSCSI per host setup somewhat pointless. Just to clarify: I'm not looking for a how-to, but an explanation (link to paper, VMWare recommendation, benchmark, etc.) as to why 2-NIC configurations are the norm vs. 4-NIC iSCSI configurations. i.e. storage vendor limitations, VMKernel/initiator limitations, etc.

  Read the article

• INSERT DELAYED on locked tables blocks PHP processes to continue

  - by sw0x2A

  Our webservers write some tracking information into a MySQL database (using INSERT DELAYED into MyISAM table). When a huge SELECT query is executed on this table or when it is locked for another reason, the webserver processes (with INSERT DELAYED) are waiting for the database and in some cases the MaxServer limit is reached in Apaches, so they will stop serving requests. We use INSERT DELAYED because The DELAYED option for the INSERT statement is a MySQL extension to standard SQL that is very useful if you have clients that cannot or need not wait for the INSERT to complete. This is a common situation when you use MySQL for logging and you also periodically run SELECT and UPDATE statements that take a long time to complete. Quote from MySQL documentation. I am wondering why the Apache processes are waiting for the INSERT DELAYED to finish. And what can I do to just send the data and forget about it. (Since this is logging data, I do not care if we lose some entries.) Even when the table is locked the PHP script should just go on and should not wait for an answer of MySQL. (We do not want to setup Master-slave for this table but we are thinking about move this data to some NoSQL database. But for now I would like to know why INSERT DELAYED is not working as expected.)

  Read the article

• Seperate external and intranet portals using the same functions .htaccess

  - by jezzipin

  We are currently struggling with setting up rules for a .htaccess file for a website built upon our company product. The product is built using PLSQL and procedures can be accessed using URLs. We use this functionality to present different options to our users. These options can be injected into HTML pages using replacement tags. So, the tag [user_menu] is always replaced with: /wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for external sites and /intranet/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for internal sites. The issue we are having is twofold. We need to write our .htaccess rules so that the user can access the functionality whether they are internal or external. So, the links should work as follows: http://www.example.com/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} or http://www.example.com/internal/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} This is the other problem. As you can see for the internal link above, the procedure needs to be prefixed with internal instead or intranet. We cannot change this in our standard tags as this will affect other sites so we need to achieve this also using htaccess. Could anyone assist with this issue? I apologise if this is brief or confusing but it's something i've never done before and have been given the task of doing. I apologise for the lack of code that will be posted above however I am a front end developer and have been left to make these changes having no prior experience of .htaccess to please bare with me.

  Read the article

• Windows 8 Windows Store (Metro/ModernUI) applications not working (just show 'busy' animation or white screen)

  - by davidm_uk

  I have a Dell XPS 15 which shipped with Windows 7 x64, which I recently upgraded to Windows 8. The process went surprisingly smoothly (given that this was an upgrade, not a complete re-install), and the system generally seems very stable. However, today I noticed that several of the Windows Store apps don't work: they all behave in the same way, launching but then showing a spinning 'wait' animation indefinitely. This is affecting the standard Microsoft Mail, Store, Weather, News, Travel, Finance, Sport, Games and Music apps. The Bing app just shows a Bing logo on a coloured background (but no wait animation). The Calendar, Photos and SkyDrive apps open but then show a white screen. The Maps and Camera apps work without problems. The live tiles on the Start screen are updating correctly, for example the Mail app's tile shows a summary of new mail despite the Mail app's problems. All of these applications were working correctly a few days ago. I'm sure I've used several without problems since the last Windows update occurred on 7th November. Any suggestions on what might have happened and/or how to fix it would be very welcome. I don't need these Windows Store applications, but the fact that they're not working is irritating me.

  Read the article

• Synchronize folder on network, preserving hard links

  - by Waleed Hamra

  I have few computers using Windows XP Pro. I want to synchronize/back a folder from one machine, to another one. This far, It's a simple problem, and I've used FreeFileSync for such operations, with very satisfactory results. But, this all changes when hard links come into play. Today's folder contains lots of hard links, using such backup programs will result in hard links being treated as multiple files, and copied as such, greatly increasing folder size on destination, and defeating the purpose of using all these hard links in the first place. It gets more complicated when we take into consideration the fact that network shares on Windows DON'T expose hard linking facilities, meaning that running a hard-link-aware tool like rsync using --hard-links will be of no use. So my question, how can i backup my folder to the other computer, while preserving hard links? I don't mind installing 3rd party tools to do it, as obviously, the standard windows shares approach won't work... I am guessing there might be some tool that can be installed on both machines and works in a server/client mode? anyone has any idea how to do this?

  Read the article

• Create custom launchers in GNOME 3

  - by hochl

  I'm using Debian testing, and I have been switched to GNOME 3 by the Debian update yesterday. I'm not very comfortable with the UI. I wanted to customize everything like I had it with GNOME 2, but I simply couldn't find any way to change preferences like I'm used to. I've digged some, but all answers I could find did not help me achieve my goals. So please, if anyone knows the solution to this I'd be thankful: 1) I want several launchers that launch terminals, with different arguments and different coloring/title. I have searched everything and there seems to be no menu, no right-click, nothing which is standard in any UI I know. How can I create several launchers in this bar on the left side that launch the same application, just with different parameters? With GNOME 2 this was a piece of cake. 2) I want to switch between different terminals using ALT-TAB. Right now, I'm always just getting to the same, already-opened terminal. When I open two terminals by simply creating the second one by issuing xterm &, I still get one Terminal entry with ALT-TAB, and I have to navigate with cursor keys or mouse wheel to select one of the two xterminals. Instead, I want to open a new terminal when I click the quick launch terminal icon from the bar on the left side of the screen and navigate through them like on KDE/GNOME 2/Windows/any reasonable UI. Can this be done? 3) Is there a trick to make bluetooth devices work like on GNOME 2? Right now, my BT keyboard won't pair anymore, which, as you can imagine, makes me pretty angry. and, if anything fails: 4) How can I switch back to GNOME 2 again? :-) Honestly, who did design this? What were they smoking? I feel like I'm not allowed to do anything except start one of any application that has an icon and just with the default parameters. That can't be true, right? I feel massively restrained by this stuff :(

  Read the article

• Is there any way to synchronize AD users with Office 365 but still be able to edit them online?

  - by Massimo

  I'm performing a migration to Office 365 from a third-party mail server (MDaemon); the local Active Directory doesn't include any Exchange server, and never had any. We will need directory synchronization in order to enable users to log on to Office 365 using their domain credentials; but it seems that as soon as you enable directory synchronization, you can't perform any action anymore on Office 365 users: all changes need to be made on the local Active Directory, and then replicated by the synchronization process. For ordinary users with a single e-mail address and standard features, this is not a big problem; but what about users which need an additional address? What if I need to configure some nonstandard setting, like "hide from address list" or a custom mailbox quota? From what I've gathered, the only supported way to do this, as you can't directly edit Office 365 objects anymore after synchronization is enabled, is to extend the local AD schema with Exchange attributes, and then manually edit them (!). Or, you can install at least one local Exchange server, and then use the Exchange administrative tools to configure the required settings. Is this correct or am I missing something? Is there any way to synchronize user accounts and password, but still be able to edit user settings directly in Office 365? If not (everything really needs to be set locally and then synchronized), is there any simpler way to do this than manually editing LDAP attributes or installing a local Exchange server?

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >